728x90
반응형
휴대폰 납땜용 삼안 현미경 세트, 1080P 48MP 2K 4K HDMI USB VGA 비디오 카메라, 50X 100X Simul Focal 스테레오, PCB 수리
https://s.click.aliexpress.com/e/_Dnn4jwN
226.49US $ 35% OFF|1080p 48mp 2k 4k Hdmi Usb Vga Video Camera 50x 100x Simul Focal Stereo Trinocular Microscope Set For Phone So
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
환경산업 관련 제품 및 기술 목록 : 801-1000
| NO | 제품명 | 모델명 | 회사명 | 홈페이지 | 내용 | 카테고리 |
| 801 | Incineration Facility Air Pollution Prevention system | Incineration Facility Air Pollution Prevention system | Mirae NET Co., Ltd. | http://www.mrnet21.co.kr | 1. Outline - Liquid scrubber + bag filter or liquid scrubber + ceramic filter. which have enhanced efficiency than previous prevention system for incineration facility. - When applied to semi-dry system. the previous prevention system for incineration facility: incinerator → heat exchanger (boiler or quencher type) → semi-dry facility that sprays liquid calcium-hydroxide → prevention facility composed of bag filter When the liquid scrubber. developed by our company. is applied to the rear. it does not take up a lot of area space and it holds higher efficiency compared to semi-dry system. Also it can reduce the use of liquid calcium-hydroxide up to 3/4 which reduces waste calcium hydroxide in bag filters and results in reduction of maintenance expenses. In addition. waste liquid created can be used in re-processing facility. so there is no waste water created since almost all circulated manufacture liquid is reused. 2. Introduction 3. Characteristics - As the facility is simple. there is no minor malfunctioning. and installation/maintenance expenses are lower than previous liquid scrubbers. - It is possible to simultaneous remove dust and gas and the removal efficiency is high. - Cleaning the inside of the scrubber is easy. so there is no risk of adhesive dust. such as hume. entering the facility or there being a lot of dust in incineration facility. - There is no problem with letting in gas of temperature 400 ℃ or below. and it is possible to remove gas as well as cooling the scrubber simultaneously. so dust and gas are removed with high efficiency in addition to cooling the scrubber without the use of heat exchanger (cooling device) at front side of the liquid scrubber. - Little waste liquid created since most of circulated manufacture liquid can be reused. - In room temperature moisture is not released through the rear part of the liquid scrubber. so it minimizes in-let water/chemicals used. thus achieving economic feasibility. - In room temperature. it is possible to install filter dust gathering facility (BAG filter or ceramic filter) at the rear part of liquid scrubber (facility unrelated to condensation) 4. Application - New air pollution prevention facility for incineration facility - Dust and gas can be removed simultaneously with cooling of gas |
Technology & Process |
| 802 | Incinerator | Continuously charging type incinerator | Daekyung Gongyoung Co., Ltd. | http://www.dkky.co.kr | 1. Outline Green smokeless incinerator boiler burns waste matters of various kinds and heats water with waste heat. and so. is used for heating for temperature control of gardening farms or cattle sheds. It includes a blow fan. an air nozzle. a cyclone and a chimney stack. and is a non-pollutant incinerator for discharging colorless and odorless clean exhaust gas. 2. Introduction 1) Specification. model name and volume(kg/h) of incinerator(See table 1. Attach-1) 2) Waste matter charging method - Collective charging type: After charging waste matters at once. close the inlet. and transfer carbonization gas made in the first combustion chamber to the second combustion chamber for perfect combustion. - Continuous and collective charging type: Continuously put waste matters into the inlet after opening the inlet to burn the waste matters. or alternatively. after charging waste matters at once. close the inlet. and transfer carbonization gas made in the first combustion chamber to the second combustion chamber for perfect combustion. 3. Characteristics It is a safe and strong shaft trunk type. A cyclone dust collector is installed to prevent air pollution. and an incineration period is short. It is smokeless and reduces incineration expenses by adopting a multi-nozzle burning method. and discharges non-pollutant gas by processing also generated hydrochloric acid gas. 4. Application Incineration of waste paper. wood. tire. leather. fiber. plastics. nylon. polyestyrene. polyurethane. dried vegetable. styrene foam. vinyl. rubber. film. waste oil. paint. carcass. pathogenic extracts. and so on | Equipment |
| 803 | Incinerator | TORNADO | New Tech Burner System Co. | www.tornerator.com | 1. Outline - The company has excellent a high temperature gas reforming cyclo-incineration technology through strong swirling flows and a high- temperature steam reforming reaction. It perfectly burns up any kind of waste with pollutants such as dust. smoke and odor. 2. Introduction 3. Character - High temperature & high speed gas reforming incineration. - High performance axial dust collection. - 100% Air cooling body. - Less than 3% loss ignition. - Satisfaction of the emission standard for DXNs. - Rapid disassembly and replacement. - Excellent service time and durability. 4. Application - Incinerator and dust collection |
Equipment |
| 804 | Inclined plate clarifier | Inclined plate clarifier | Samyoung Eng & Tech Co., Ltd. | http://www.syent.co.kr | 1. Outline - The settling efficiency is raised by the effect of multi-settling pond and it is available to be manufactured by compact structure and reduce the settling area by the settling efficiency. It removes the minute floc effectively by precise settling. 2. Introduction 3. Characteristics - Improving the settling efficiency : raising the settling efficiency by the effect of multi-settling pond. securing the stable treatment efficiency and preventing the scum. removing the minute floc by precise settling - Securing the economic efficiency by the increase of settling area : compact settling facility by the improvement of settling efficiency and reduction of settling area. reduction of loss caused by stopping the settling facility. easy maintenance due to the unit type. - Expectation of increase demand of governmental authorities (water purification plants and sewage treatment plants) : guaranteeing the efficiency. stability and convenience by the increase of settling area and removal of minute floc. 4. Application - Water purification plant - Settling pond (condensing tank) of sewage treatment plant |
Equipment |
| 805 | Indoor Air Environment Total Measuring System | IAQ-2000 | KEMIK CORPORATION | http://www.kemik.kr | 1. Outline -A real time simultaneous monitoring device for automatic calculation of the indoor air contents for CO2. CO₂. TVOC. CO. NO₂. O₃. O₂ as well as Humidity. Temperature. Dew Point. Ventilation Rating. It is a convenient portable device appropriate as on-site measurement equipment. 2. Introduction 3. Characteristics - Real time simultaneous monitoring for automatic calculation of the indoor air contents for CO2. CO₂. TVOC. CO. NO₂. O₃. O₂ as well as Humidity. Temperature. Dew Point. Ventilation Rating. - Possible to add an optional function of simultaneous monitoring on Particulate Matters (PM-10) - It is a convenient portable device appropriate as on-site measurement equipment. - Easy to manage data including auto-saving of measured values. 3 dimensional graph printout and etc. -Possible to have the Data Analysis and Printing out by connecting to Pocket PC -Possible to perform Data transmission to PC and EXCEL file saving 4. Application - Indoor Air Quality Monitoring for Multi-purpose facilities. schools. passenger waiting rooms. airport passenger terminals. general hospitals. indoor car parks. public hygiene of work place environment -Measurement of the new house syndrome removal effects. air monitoring of newly constructed buildings. museums. research equipment used by the universities and the research institutes. |
Equipment |
| 806 | Indoor air quality analyzer | Indoor air quality analyzer | Heysoung Environment Co., Ltd. | http://www.heysoung.co.kr | 1. Outline - Measure indoor air pollution levels in accordance with the Indoor Air Quality Management Act. 2. Introduction 3. Character - Measure Indoor air pollution levels in accordance with the Air Quality Management Act. - Measure indoor air quality in the school in accordance with the School Heath Act. - Measure indoor environment of tunnels. subways and underground roads. etc. - Measure indoor air quality of living environment such as offices and house. etc. - Analyzes microorganisms in indoor air of public use facilities and multi-use facilities. 4. Application - Desulfurization facilities |
Equipment |
| 807 | Indoor air quality detector | CO2 detector in indoor air | Estech Co., Ltd. | http://www.estech.net | 1.Outline CO2 detector is a product that is installed in places where there are lots of possibilities that CO is generated. for example. hospitals. homes (interior of a room). indoor ducts. and the like. It has functions of outputting current 4 ~ 20 mA and displaying concentration on LCD. It adopts infrared rays sensor type and exhibits high performance and accuracy by means of a microprocessor. 2. Introduction (See table 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000276-2.jpg></center> 3. Characteristics (See table 2) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000276-3.jpg></center> 4. Application (See table 3) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000276-4.jpg></center> | Equipment |
| 808 | Indoor air quality meter | AirBoxx-7UGM | KINE INDUSTRY | http://www.e-kine.com | 3. Characteristics - Suitable for an indoor air quality test method. - Storing measured values for 15 days is possible when six sensors are used. - Storing up to names of measure points is possible. - Storing measure times at the intervals of 15seconds ~ one hour is possible. - An AA battery or an AC adaptor can be used as power supply. - Easy correction using Span & Zero gas is possible - Storing measured data in Excel is possible. 4. Application - Measurement of indoor air quality(CO.CO2.O3.VOC.temperature. humidity) - Measurement of public use facilities and underground living space - Measurement of outdoor air quality |
Equipment |
| 809 | Indoor Environment Measuring Device | IES-4000 | SIBATA Co. Ltd. | http://www.sibata.co.kr | 1. Outline IES-4000 is designed to simultaneously measure six items (such as floating dust. carbon monoxide. carbon dioxide. temperature. humidity and wind speed). save measured data in a memory card. enter the saved data in PC by inserting a card reader and then automatically output. In addition. it uses a RS-232C cable to easily transfer measured data into a computer using cable. 2. Feature - Very efficiently put under control the entire range of indoor environmental measurement. building management and multi-purpose public facility management - Simultaneously measure nine items defined by the Building Environment and Hygiene Standards - Measuring time varying from 1 minute to 99 minutes (average) - Measuring intervals varying from 1 second to 60 seconds - Remember. save and output measuring outcomes of about 100 points - Enter and save recorded items such as building title. measurer. climate. number of people in each room and number of smokers - Make on-site measure task efficient by simultaneously measuring nine items that can be entered through screen touch - Make reporting efficient due to the feature to automatically print out report forms - Gauge the level of satisfaction and dissatisfaction based on ISO7726 and ISO7730 3. Introduction 4. Application - Indoor environment measurement |
Equipment |
| 810 | Industrial deodorization system | Deodorization System | Eco Solution Corp | http:// www.ecosol.co.kr | 1. Outline This product is phosphorous deodorization total system composing chemical. engineering. TMS and Bi to reduce and control foul smell in industrial site. It is most effective performance per cost system for the site where bad odor is causing problems. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000259-2.jpg></center> 3. Characteristics (1) 1 fan machine can cover large area treatment (15m×15m×4m) (2) Easy installation without alteration of the existing system (3) No use of centrifugal separator or nozzle. preventing breakage and improve internal reliability (4) Since size of particle sprayed is small. odor eliminating effect is maximized (5) Low cost of operation and easy system maintenance (6) Atmosphere monitoring system and web system connection is possible when located in remote site 4. Application (1) Large landfill site. waste dumpsite foul smell (2) Foul smell from various industry site processes (3) Foul smell from system treating livestock and seafood waste (4) Foul smell from leather processing system <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000259-1.jpg></center> | Equipment |
| 811 | Industrial Heat Meter | Industrial Heat Meter | Wizit Dongdo Co., Ltd. | http://www.dongdolighting.com/ | 1. Outline - The Industrial Heat Meter by Wizit Dongdo Co.. Ltd. can read the meters during the blackout as it uses a rechargeable battery. In addition. this Meter has a built-in RTC circuit so real-time data reading is possible and features convenient installation and operation due to its integrated communication unit. 2. Introduction 3. Characteristics - Saving user data by using a data logger (Saving data of 744 EA per hour. 31 days and 60 months respectively). - Meter reading during the blackout (rechargeable battery). - Real-time data reading due to a built-in RTC circuit. - Convenient installation and operation due to its integrated communication unit (built-in PSTN modem. support of RS-485. support of pulse output). - On-site meter reading by using an IR port. - Accurate calculation of an amount of heat through application of K-factor. - Type approved product so that it can be used for transaction purposes. 4. Application - Heat Meter |
Equipment |
| 812 | Industrial Microbubble | Industrial Microbubble | O2Bubble Inc. | http://www.o2bubble.co.kr | 1. Outline • Wastewater treatment and floatation facilities wherein microbubbles are charged with negative charges absorb ‘ss’ with micron unit floating in the water that will emerge slowly. Considering this. it has remarkably low sludge loss rate compared with the existing system. 2. Introduction 14Biz-108.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-108.JPG'>3. Character • It treats the inflow of the excessive handling capacity of wastewater because of the fast removal of ‘ss’. • It gives the maximum effect of microbes treatment because of the increase of dissolved oxygen in case of applying an oxygen generator. • It promotes the reduction of treatment chemical. such as coagulant and caustic soda. • It reduces the waste disposal cost because of the decrease of the final sludge • It saves electricity charge because no operation of aerator. blower. and agitation pump is required. • Treat wastewater over the design criteria handling capacity and no additional manufacturing of facilities is required. • No consumables required after installation. 4. Application • Wastewater treatment and floatation facilities |
Equipment |
| 813 | Industrial Ventilation | Industrial Ventilation | Kim’s Skill For Green Co., Ltd. | http://www.ksgplant.co.kr | 1. Outline - Industrial Ventilation refers to ventilation that discharges polluted air in workplaces and supplies fresh air at the same time and is classified into general ventilation and local exhaust ventilation. 2. Introduction 3. Characteristics - Accurate design and efficient construction suitable for field conditions and requirements are possible. Making and installing at a reasonable cost are possible. - Effective management of structures and equipment with the best efficient system by the company’s experienced maintenance team. - Change or addition of dust collectors or treatment of closed lines - Accurate design and reasonable cost 4. Application - Industrial Ventilation |
Technology & Process |
| 814 | Industrialization of Organic Waste | Industrialization of Organic Waste | ANNABINI TEZ Co., Ltd. | http://www.abtez.com | 1. Outline - Anaerobic digestion is one of the oldest methods. which has been widely used to reduce a volume of solids for stabilization of organic solids including sewage sludge and organic materials are decomposed by bacteria under an environmental condition where dissolved oxygen does not exist. which in turn generates byproducts in this process. 2. Introduction 3. Character - ANS Method - Organic materials which flow in from an anaerobic digestion tank are decomposed through hydrolysis in a biogas recovery process. which generates nitrogen concentration in the form of unstable ammoniac nitrogen. - Ammoniac nitrogen generated from a digestion tank after the inflow of organic materials can be stabilized in a digestion tank if optimal conditions are given. - ANS method recovers biogas from organic materials through an anaerobic digestion process and simultaneously stabilizes the concentration of ammoniac nitrogen and this method makes possible the optimization of aerobic treatment capacity in the latter process. 4. Application - Industrialization of Organic Waste. |
Eco-Friendly Products |
| 815 | Inertia Impact Crusher (SHARK-XQ) | Jungil Machinery | http://www.e-jungil.com | 1. Outline • Shark-XQ (inertia impact crusher) crushes urban wastes. vinyl wastes. plastic wastes. electronic scrap. and wood wastes at high speed. • It offers excellent treatment ability. 2. Introduction 14Biz-427_Inertia_Impact_Crusher_(SHARK-XQ).jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-427_Inertia_Impact_Crusher_(SHARK-XQ).jpg'>3. Characteristics • Cutter surfaces have been treated through heating to strengthen the surface. and wear resistance has been increased to enhance its usage. • The clearances of the fixed cutters can be adjusted independently. The maintenance cost can be reduced because only worn fixed cutters can be adjusted. • It is an inertia impact-type by rotor self-load and has a structure that does not require an additional external fly wheel to reduce electricity cost. • The shape of the cutter is tetrahedron. Once the cutter is used. it can be polished up to three times and reused so that it can save the cost of consumables. 4. Applications • High-speed crushing and preprocessing of urban wastes. vinyl wastes. plastic wastes. electronic scrap. and wood wastes. |
Equipment | |
| 816 | Inflow Rate Measurement System | Inflow Rate Measurement System | Joeun Environment Co., Ltd. | http://www.rcf.kr | 1. Outline - Inflow Rate Measurement System is a system that measures a inflow rate per unit time by analyzing water level signals from a sewage inflow tank in a programming logic controller (PLC) of a process control panel and calculating increases in water level (H2-H1) before and after the unit time (H1 and H2) and then applying the area of a structure. 2. Introduction 3. Characteristics - Real-time check on an exact inflow rate - Treatment by automatically changing process time and treatment volume per single process according to changes in inflow rate - Predictive operation for inflow by recording and analyzing changes in inflow rate on a daily. monthly. seasonal and special period basis in remote supervisory control 4. Application - Flow Rate Measurement |
Equipment |
| 817 | Inline Mixer | Z22~300 | Duk Young Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Introduction 2. Characteristics - Dollop is removable. - This mixer liquefies solid promptly. - This mixer mixes related substances equally to stimulate reaction of the substances 3. Application - As conti-TDS is used together with this mixer. a mixable system is composed while dispersing related substances |
Equipment |
| 818 | Inline pump | Shinhan Pump Tech. Co., Ltd. | http://1181.co.kr | 1. Introduction 2. Characteristics ㆍNo breakdown caused by poor axis connection by using all-in-one pump and motor axis ㆍNo noise and vibration ㆍAble to replace the main axis and impeller without disassembling pump casement ㆍDo not need to install dust proof frame ㆍSmall installation space. and able to install horizontally and vertically ㆍNo water leakage by installing mechanical seal at shaft seal equipment 3. Application ㆍCirculation of cold and hot water. circulation of hot water supply. transfer for agricultural material. water supply. for pressurization ㆍFor standard industry. light loading. public works |
Equipment | |
| 819 | Inline Sifter & Centrifugal Sifter | K300 - K1350 | Dukyoung Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Outline The device can be installed at the middle of pneumatic conveying line and removes foreign substances. and is able to disassemble over size particle easily. Material for Mesh is usually nylon type and can be manufactured with stainless steel as well. The Mesh size vary from 212㎛ to 4000㎛. 2. Introduction 3. Characteristics - Able to transport selected elements to various points as one sifter treats elements of several silo/hopper. - The device enhances productivity by using less time and labor force as it can conduct shifting and conveying at the same time. - Easy to inspect and clean as mesh can be replaced easily. - Low maintenance fees 4. Application - Able to install inline type at pneumatic conveying line. and can directly insert selected grains into hopper or silo - Gravity type is installed at upper part of hopper. silo. and mixer |
Equipment |
| 820 | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline - A thermal mass flow meter is a flow meter that measures the mass of gases and vapors by measuring the difference of a temperature between two heat transfer sensors. The thermal mass flow meter does not need a separate temperature sensor. a pressure sensor and a flow computer as it automatically compensate for temperature and pressure. Its main purpose of use varies on the fields ranging from aeration tank line. methane gas in a landfill. building duct line. semiconductor industry. iron and steel manufacturing industry to the petrochemical industry in addition to water treatment. 2. Introduction 3. Characteristics - INNOVA Flow & Level Switch is a measuring instrument that outputs alarms by detecting the flow of liquids or the contact part of liquids. - This product is used to confirm the flow of gases or liquids or their stop conditions and to control the level of liquids. - It is easy to install as the material of sensors and the contact parts of fluid is stainless 316. - The measurement method of the sensor uses a difference in heat and it is identical to the measurement principles of a thermal mass flow meter and a thermal mass flow controller. - This sensor is composed of two resistance temperature detectors (RTD). One is a self-heating sensor and the other is a precise temperature sensor. A constant differential temperature is maintained at the two sensors and when there is a fluid flow or a contact part of fluids. a temperature change occurs and the mass flow rate of a fluid is calculated by the magnitude of changes and functions of a flow switch and a level switch are provided by confirming the contact conditions of fluids. 4. Application - INNOVA Flow & Level Switch |
Equipment | ||
| 821 | INR Process | INR Process | Il Shin Environmental Engineering Co., Ltd. | http://www.okilshin.co.kr | 1. Outline INR PROCESS is a Nitrogen removal (reducing nitrate nitrogen into N2 gas) system which uses sulfur microorganisms such as Thiobacillus. and INR Pellet. 2. Feature - Wide surface area enabling denitrifying autotrophic microorganism to inhabit and breed. - Promoting dominance and culture maintenance of denitrifying autotrophic microorganisms. - Preventing pH reduction in a denitrificaton process. - No regular removal of the nitrogen gas generated from a denitrification process required. - Easy maintenance. 3. Introduction 4. Application - Nitrogen removal |
Equipment |
| 822 | Insulation Kit | KINS-LA | Kukil Corporation | http://www.kukil.co.kr | 1. Outline - This is a product for the insulation and sealing between the ranges. which is applicable to a wide space ranging from ANSI 150# to over 2500# 1/2” of the ANSI/ASME. API.DIN and JIS and the vacuum state as well as under high-pressure. 2. Introduction 3. Character - Applicable in a vacuum state and even in a various range of pressure because the semicircle shaped Rubber Seal is placed at the Gasket Core with processed grooves. - Applicable in the parts where electrical protection is needed for the Flange insulation and galvanic corrosion caused by the use of different materials is concerned. 4. Application - Flange insulation that electrical protection is needed. - Insulation to prevent galvanic corrosion caused by the use of different materials. - Insulation at a time of using the different types of Flanges (RTJ to RF Flanges). - Usable for preventing corrosion of the flange when in the event of the insulation sleeves and washer. using the Bolts/Nuts(A193Gr.B7 / A194 Gr.2H) for the flange with special material. |
Equipment |
| 823 | Integrated treatment device for adulteration | Integrated treatment device for adulteration | DS Entech Co., Ltd. | http://www.dsene.com | 1. Outline - Integrated pre-treatment facility of small sized treatment plant of small amount of sewage. - It is composed of single body to remove adulteration and sand of inflow sewage simultaneously. - Sewage flowed in the line is treated firstly by the stepwise screen which is available to remove the minute particles and transferred to the settling tank. T settling tank is manufactured by tank structure to help the smooth precipitation with the slow speed less than 0.3m/sec and residual time more than 30 seconds. - Settled sand in the tank is collected at the one point by the horizontal screw and removed by the slope screen. - Collected adulteration and sand are discharged by being divided separately. It is available to install at the small space and easily maintain due to the compact structure. 2. Introduction 3. Characteristics - It has the structure that the rotating grid plates are locating between the fixed gear grid plates. There are no blockade between the bars where the places producing large amount of agglutinant sludge. - There is no breakdown factor by the adulteration and sand because there are no wearing out components and driving devices under water. It is easy to repair. - It is available to install in the small space because it is composed of single and compact device removing the adulteration and sand at the same time. - There are less odor because the equipment is covered and it is manufactured by stainless steel of corrosion-proof. - Inflow sewage is flowed in at the top of gear grid plates so it has good filtering efficiency at the bottom which has small amount of sewage. - It has little danger of overflowing water with the change of sewage amount because it has low water resistance and blockade compared to other integrated treatment device. 4. Application - Sewage - Sanitation - Pre-treatment facility as livestock wastewater |
Equipment |
| 824 | Integrated Water Treatment Plant | Integrated Water Treatment Plant | Korbi Co., LTD. | http://www.korbi.com | 1. Outline • The advanced sewage water treatment technology using natural draft aerobic tank and wetland is verified as the new environment technology by the Ministry of Environment. It has excellent treatment efficiency for organic matters. nitrogen. and phosphorous compared with other technologies. • It is an eco-friendly technology that excludes machines as much as possible and harmonizes with the surrounding scenery. Its maintenance cost is also dramatically reduced. • It is applied to many domestic sites. such as purification project of polluted river. military wastewater treatment facilities. community sewage treatment facilities. etc. It is not only recognized with its technical excellence by satisfying strengthened water quality standards of effluent water but is also being actively applied to overseas sites. 2. Introduction 14Biz-136.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-136.JPG'>3. Characteristic • The quality of discharged water has excellent removal efficiency of nutrient salts so that it can be reused as grey water. • It has outstanding denitrification effect without supplying a separate carbon source. • It satisfies discharged water quality standards in spite of the change in water amount and quality. • Sludge is not generated because multiplication rate and decomposition speed of organic matter and microbes are in equilibrium. • It has low installation cost compared to other construction methods using air blower. pump and agitator as well as semi-permanent life cycle because of using inorganic materials. such as sand and gravel. • No professional manager is required because machines. electricity. and chemicals are not used and the maintenance cost is low. • It is unaffected by the change of temperature because it is an underground buried type and aerobic tank reed. Also. the anaerobic tank water plant keeps it warm during winter. • No disinfection facility is required because the number of colon bacillus is maintained at 1.000/ml or less. • No facilities are rejected by quality control for normal operation among constructed facilities. • No noise is created during nighttime because machine facilities are not used. 4. Application • Purification project of polluted river. military wastewater treatment facilities. community sewage treatment facilities. etc. |
Equipment |
| 825 | Intermittent Aerobic Digestion Catalytic Oxidation Method | DeNiPho? | Green Technology Co., Ltd | http://www.greenenc.com | 1. Outline - This intermittent aerobic digestion catalytic oxidation method is designed to produce a synergy to a maximum degree by combining intermittent aerobic digestion involving repeatedly alternating aerobic and anaerobic conditions. catalytic oxidation spawning airborne and attached microbes and post-denitrification process. 2. Introduction - Four-tier intermittent aerobic digestion + post-denitrification involving raw sludge 3. Character - Proven efficiency in removing organic matters. nitrogen and phosphorus and stable - Great flexibility in response to load change - Odor and noise-free operation - Treatment of organic waste materials - High quality of treated water during winter - Appropriate for advanced sewage treatment with low C/M ratio available in the country - Applicable to sewage treatment plant for activated sludge in operation ㆍ The system allows existing structure to be utilized instead of replacement and expansion by using mechanical devices already installed. while not disrupting facility operation even in the face of renovation project. 4. Application - Intermittent aerobic digestion catalytic oxidation method |
Technology & Process |
| 826 | Internal Circulation Vegetation Water Purification Wetland | Internal Circulation Vegetation Water Purification Wetland | Centennial Technology Co., Ltd. | www.centechnology.com | 1. Outline As a technology to create an internal circulation vegetation water purification wetland. Wetland Cube is an eco-friendly purification technology which restores a river ecosystem in urban areas and treats non-point pollutants and overflows. Polluted rainwater is flowing into a first-stage rainwater storage tank. distributed into a vegetation purification tank. and removed organic matters. nitrogen. phosphorus. and harmful materials by an airlift. The treated first-stage rainwater is flowed into the river and can be supplied as instream flow. The upper part of the treatment facility installed in line with the riverbank will be created as an artificial wetland. requiring no additional landscaping. 2. Feature - Eco-friendly purification technology - Treat non-point pollutants and overflows - Convenient maintenance - Require a minimal installation site - Rapid construction because of module structure - Reduce the period of creating an artificial wetland 3. Introduction 4. Application - Water purification |
Technology & Process |
| 827 | Positive pressure equipment | Positive pressure equipment | KAEL Co., Ltd. | http://www.kael.co.kr/ | 1. Outline For existing positive pressure facility. there is no function to remove harmful substance included in outside air. Only positive pressure indoor is maintained by simply aspirating outside air into indoor. So it is critical that the harmful gas removal technology is introduced by using adsorbent technology in respect of a facility structure. 2. Introduction <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000032-2.JPG></center> 3. Characteristics - Chemical filter system. which using impregnated active carbon capable of entirely removing harmful gas from the positive facility unit. is introduced. - Impregnated active carbon enables selective application depending type of gas and adsorbent efficiency is very high. - Removal efficiency is high by using a high performance of impregnated active carbon and replacement cycle may be extended. There is no side effect due to mounting or removal since gas is collected by chemical adsorption. 4. Application Facility to prevent erosion of equipment within a substation by interrupting inflow of outside air into indoor and protect a person who resides by more highly maintaining positive pressure than air pressure indoor according to technical instructions concerning maintenance of positive pressure in the substation. etc. | Equipment |
| 828 | In-use Vehicle Emission Testing System | In-use Vehicle Emission Testing System | DASAN RND Co., Ltd. | http://www.dasanrnd.co.kr | 1. Outline This In-use Vehicle Emission Testing System is software used for a thorough test of emission gas. Developed with a unique technology of DASAN. it has passed various tests and is provided to customers. 2. Introduction 3. Characteristics - ASM 2525. LugDown. no-load regular operation mode. no-load accelerated mode - Remote control of errors - Flexible addition or removal of channels by users - Systematic management of various devices - Main host system and smooth data management - Automatic update 4. Application - Thorough emission gas testing |
Technology & Process |
| 829 | IODC(Ilshin Organics Destruction Cell) | IODC(Ilshin Organics Destruction Cell) | Ilshin Environmental Engineering | www.okilshin.co.kr | <!--StartFragment--><DIV class=1 style=letter-spacing: 0pt; -ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt; tab-stops: left blank 27.0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 바탕;>Ilshin Organics Destruction Cell (IODC) is a water and wastewater treatment</span></DIV><DIV class=1 style=letter-spacing: 0pt; -ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt; tab-stops: left blank 27.0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 바탕;>system designed to reduce recalcitrant Chemical Oxygen Demand</span></DIV><DIV class=1 style=letter-spacing: 0pt; -ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt; tab-stops: left blank 27.0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 바탕;>(COD).remove color and destroy micro pollutants. Being modular. the system</span></DIV><DIV class=1 style=-ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; tab-stops: left blank 27.0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 바탕;>can be scaled to achieve required organics removal and flow rate.</span></DIV><DIV class=1 style=-ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; tab-stops: left blank 27.0pt;> </DIV><DIV class=1 style=-ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; tab-stops: left blank 27.0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 바탕;></span> </DIV> | Water Treatment |
| 830 | Ion Exchange Resins | Kyeongmin Watercom Inc. | http://indion.co.kr | 1. Outline • Ion Exchange Resins are synthetic resinsthat trigger ion exchange to manufacture pure water. separate ionic materials. and refined chemicals. • Styrene is the most chemically stable among ion exchange resins. It maintains ion exchange function at 120°C for a cation. 2. Introduction 14Biz-446_Ion_Exchange_Resins.jpeg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-446_Ion_Exchange_Resins.jpeg'>3. Characteristics • Hydrogen peroxide oxidizes ion exchange resins and degenerates water quality by dropping selectors. • Cation exchange resins release polymeric materials with acid radicals when it continues to oxidize and contaminate anion exchange resins. • An anion is basified quickly during oxidation and can cause a leak of chlorine and silica. • Ion exchange resins clumping can be solved through separation using an electrolyte solution and an antistatic agent. 4. Application • Water and sewage treatment facilities • Ultrapure water manufacturing facilities |
Equipment | |
| 831 | Ion Scrubber | Kunwoo Technology Environment | www.cleanenergy7u.com | The General Principle of Wet honeycomb electrostatic precipitators Electrostatic Precipitators on this page precipitate a dusty. OIL MIST and harmful gas by using the power of static electricity. Precipitators consist of electric discharge poles and electric charge by the CORONA electric discharge. precipitation poles and precipitation plate by using static electricity and high volt transformer rectifier. It prevents re-scatter of dust from reverse ionization or electric resistance because stable high tension electric field is always formed in the electric discharge poles and precipitation poles. Also. the latest technology and material were adopted and applied. The application scope is broad because 100% localization of parts is used and design and construction is adapted to domestic industry situation. | Equipment | |
| 832 | Ion Water Treatment System | IOREX | IOREX Co., Ltd. | http://www.iorex.co.kr | 1. Outline - Once this no-power ion water treatment system is connected and installed to the water supply pipes. just running the water to the waster supplying pipes is excellent in preventing rust/scale that creates ion activation instantly. 2. Introduction - IOREX water treatment process - IOREX. the world best no-power ion water treatment system produces ion activated water by creating Turbulence-jet and electrical charge of Galvanic-current. - Ion activated water with an electrostatic field effectively removes and prevents rust/ scale. 3. Character ㆍNo Power. no medicines and no A/S ㆍNo magnets and no chemicals ㆍPossible to use it semi-permanently. (Consumption of inside parts does not occur) ㆍSimple to install and easy to use ㆍNo necessary for maintenance ㆍKeep water pressure consistently ㆍApplicable to all kinds of pipes |
Equipment |
| 833 | Ion-Exchange Fiber (FIBAN) | Ion-Exchange Fiber (FIBAN) | Siontech Co., Ltd. | http://www.siontech.co.kr/ | 1. Outline - Ion-exchange fiber (FIBAN) is a new-generation ion-exchange fiber material made with new technology and excels in purifying and refining Sox. Cl2. HF. HCI. H2SO4. HNO3. organic acids. salt. heavy metal and ion in the liquid and vapors. 2. Introduction 3. Characteristics - Five to 100 times finer diameter (10 to 20 micron) than existing products. - Very spacious surface area per volume (-30m2/m3) - Diversity of applications - Chemical stability 4. Application - Chemical plant - Semiconductor plant - Environmental industry - Electronic industry - Medical industry - Food industry - Livestock industry - Nuclear facility |
Equipment |
| 834 | Ionic Exchange System | Ionic Exchange System | MAT | http://www.mat.co.kr/ | <div class=mb18><span class=point></span></div> <h3 class=dot>Ionic Exchange System(I.E.S.)</h3> <div class=air_01> <div class=mr16> </div> <div class=mb18><span class=point>IES (Ionic Exchange System)</span>is odor. VOCs. and cation/anion pollutants<br /> removal system using ionic exchange fiber and regeneration liquid. <br /> This system consumes less water and electric power than conventional<br /> wet type scrubber<br /></div> <div class=img_text> <div class=text><span class=point>Ionic Exchange Fiber</span> Fibrous adsorbent (Polypropylene nonworen fabric) that containsradicals by radiation-induced graft polymerization exchanges cation or anion and is regene-rated continuously and stably</div></div></div> <div></div> <div class=mb18> </div> | Air Treatment |
| 835 | Ionization Water Treatment System | Ionization Water Treatment System | IOREX Co., Ltd. | https://iorex.en.ec21.com/ | ■ Introduction IOREX is environmental product developed in high-tech. Once IOREX is installed in plumbing system that water passes through. it makes activated water. which prevents rust. scale and slime that cause pollution and corrosion in plumbing system. In addition. IOREX is environmentally friendly apparatus which helps Well-being life by sterilization and softening water and keeping essential minerals for living thing. It is necessary to all plumbings which the water passes. including water supply. industrial water. buildings. apartment house and so on. ■ Feature : - CONVENIENT : easy to install. cuts off water and halts traffic only for a short period of time - SAFETY : uses natural materials (carbon) – maximizes safety - ECO-FRIENDLY : no motor power. no chemicals. no A/S - ECONOMICAL : semi-permanent – only install once - PRACTICAL : no decrease in water pressure. suitable for water quality at home and abroad ■ Application : - Waterworks. Building. Apartment. School. Hospital. Sauna. Pool - Factory / Industrial facilities. Boiler. Heat exchanger - Farms for animal / plants. etc. - and also applicable to all kind of pipe materials Optional Information - Payment : T/T in Advance - Origin : Republic of Korea - Minimum Order : 1 - Packaging : carton or wooden case - Samples : Not Avaliable | Equipment |
| 836 | IPR Process | IPR Process | Il Shin Environmental Engineering Co., Ltd. | http://www.okilshin.co.kr | 1. Outline - An IPR Process treats urban and industrial waste water with reactive filling media and a small amount of chemicals. resulting in the phosphorus (P-T) content below 0.1mg/L. 2. Feature - New phosphorus removal technology using absorbing reaction in continuous upward stream of water. - Ion absorption reaction by reactive coating media. - Stable and efficient phosphorus removal. - Semi-permanent operation without media replacement. - Low chemical and low power consumption. 3. Introduction 4. Application Water treatment |
Technology & Process |
| 837 | i-RoboChem Station | i-RoboChem Station | Centennial Technology | 82-31-500-3500 | 1. Outline - RoboChem is chemical analyzer designed for on-line monitoring of industrial processes. water and effluents. It is based on patented technology which meets various requirements in the field of environmental monitoring. industrial process control and single point of source monitoring. 2. Introduction 3. Characteristics - Complete and integrated solution for automatic water analysis ㆍi-RoboChem Station is a compact packaged system which measures COD. total nitrogen. total phosphorous. or nutrients. It is a configurable system and appropriate analyzers can be selected according to your monitoring needs. - Modilar design for high versatility ㆍModular design of RoboChem increases functionally. flexibility. and range of applications. - TMS link for remote control ㆍOn-line chemical analyzers provide the accessibility to RS-232C. RS-485. TCP/IP Ethernet and both wired and wireless connections. 4. Application - Water analysis |
Equipment |
| 838 | Iron & Manganese Device | Iron & Manganese Device | DONGHWA WATER TREATMENT & EQUIPMENT Co., Ltd. | http://dhwater.net/ | 1. Outline - The Company’s iron & manganese device is designed to filter iron. manganese and even turbidity in water by using a contact oxidation method. The system characteristically occupies a small area. costs less to install and is easy to operate and manage. 2. Introduction 3. Characteristics - It uses a contact oxidation mechanism that relies on FEROXER. - It occupies a small area and costs less to install. - It is easy to operate and manage. 4. Application - Filtering Device |
Equipment |
| 839 | IS-biofilter System | IS-biofilter System | Il Shin Environmental Engineering Co., Ltd. | http://www.okilshin.co.kr | 1. Outline - Each functions of the IS-biofilter System have different functions. Since the state of gas is changeable affected by season and operating condition. a scrubber can function either as a humidifier or a scrubber according to the composition or concentration of the influent gas. As an adequate level of water (40~60%) is maintained within Biofilter Media. active microorganism growth can be guaranteed. With no needs of supplying additional nutrient. the IS-Biofilter is filled with a water positive complex media of Rockwool-Highpolymer-compost-culture. The system can effectively remove both hydrophobic and hydrophilic malodorous substance. 2. Introduction 3. Characteristics - Using a hydrophobic/hydrophilic complex media - Easy operation and maintenance with no need of adding nutirients - Improved efficiency in odor treatment through a water positive complex media - Effective removal of high-concentrating odor. both hydrophobic and hydrophilic 4. Application - Complex odor treatment |
Technology & Process |
| 840 | Isothermal-isohumidity Air Conditioner | KI-EDC-200, 300, 400 | KUMHO INDUSTRY CO., LTD. | http://www.waterpower.co.kr/ | Product Function - Industrial air conditioner offers integrated environment control solution that is combined with dehumidification and cooling/heating adjustment function through temperature and humidity control device to prevent corrosion or malfunction of device according to self- heating of all communication and electronic equipments and changes of surrounding temperature. - Mostly. single function products such as cooler. dehumidifier are the major part. and integrated control device of isothermal-isohumidity function relies on importation which brings it very high in price. - There is air-conditioner type through refrigerant compression. or electronic type using semiconductor. KI-EDC products are environmental- friendly and applies thermoelectric semiconductor control type that is highly economical. - With thermoelectric semiconductor method. dehumidification and cooling/heating both can be realized through electrical characteristics of heat absorption and heat releasing of both sides with potential difference created when current is applied to electronic element. | Equipment |
| 841 | Jacarbon | Jacarbon | Ja-Yeon Science Industry Co., Ltd. | http://www.jacarbon.com | 1. Outline - When coconut shells (Charcoals) are carbonized and vapor-activated under high temperature. they form a porous structure in the inside of their particles and produce black particles which have a wide specific surface area and very strong adsorption. This is so-called Activated Carbon. Its granular type is the Granule Activated Carbon and its powdered type is the Powder Activated Carbon. 2. Introduction 3. Character - Purification of water. sewage and waste water. - Air purification and odor removal (cigarette filer. car canister. air conditioner. painting) - Bleaching and deodorization (flour milling. sugar manufacture and food industry) - Metalworking industry 4. Application - Ultrapure water. water-purification. waterworks. waste water. odor and toxic gas. |
Instrument & Chemicals |
| 842 | Jet Aerator | KUKJAE Environmental Technology Co., Ltd. | www.ketco.kr | 1. Outline • It is a jet aerator TN/TP-integrated equipment that increases the ripening of liquid fertilizer. • It works through aspirating technology by simultaneously introducing large volumes of high-kinetic energy liquid and air through one or more jet nozzles. 2. Introduction 14Biz-434_Jet_Aerator.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-434_Jet_Aerator.JPG'>3. Characteristics • It shows the best oxygen mixing ability by adopting the rocket fuel injection system used for aviation technology and has an outstanding agitation function. • It is designed to transfer oxygen more easily by generating microlevel bubbles. It generates heat automatically when it applied to biological treatment to provide the best condition to increase the ripening of liquid fertilizer. 4. Applications • Equalization basins at sewage treatment plants • Sewage wet wells and lift stations • Aerobic digesters • Leachate processing from landfills |
Instrument & Chemicals | |
| 843 | Hose Bag Type Pulse Jet Filter | Fantech industries | www.fantechind.com | 1. Introduction The hose bag type pulse jet filter is used for the control of the air pollution. The efficient bag filter enhances the quality working hours of the plant and also very determined factor in the work ability of the people concern. The bag filter is so prefer high quality as far as the health and hygiene are concerned for the persons and machines respectively. The product is very costly for many industries. This product is recovered from the exhaust gas. It is important for the pollution control as well as recovery of the particulate. For these two aspects. various methods are used like Cyclones. ESP. venture scrubbers. bag filters. multi dust collectors etc. 2. Product specification .jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/10(2).jpg'>-Heavy construction with stiffeners. -The entry of the raw gas is with the proper baffle plate. -Venture and cage assembly are very efficient. -The filter operation is fully automatic. -For the temperature above250 degree c. we provide the APH/economizer. -The maintenance and installation of the bag are so simple and easy. -Modular central and compact design is available. -Applicable to gas volume up to 2.00.000m3/hr 3. Application cement industries. textile industries. carbon industries etc. the bag filter has its application in fume extractions. iron steel. boiler application. powder cleaning. furnaces and foundries and in many industries for air pollution control. |
Equipment | |
| 844 | Joint for Water Service | Joint for Water Service | AJS Co., Ltd. | http://www.ajs.co.kr | 1. Outline - Groove Joint and Groove Joint Coupling used for PEP/PFP coated pipes are products which are able to improve completely the problems in piping with welding. 2. Introduction 3. Character - AJS’s Groove Joint and Groove Joint Coupling which have top priority on clean water supply are mainly used for below 300A. and it is proper to be used for natural sinking- and earthquake-proof piping in which it eases the fatigue of pipes by absorbing the change of length due to temperature difference and vibration at the joint. 4. Application - Joints for water service |
Instrument & Chemicals |
| 845 | JPF Gasket Type Series | Jing Jin Filter Innovation Co., Ltd. | http://www.filterpress.co.kr | 1. Outline • Equipment with FRP coating filter press. manufactured in order to use solution with strong corrosiveness • Gasket filter plate. hard rubber coating 2. Introduction 14Biz-460_JPF_Gasket_Type_Series.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-460_JPF_Gasket_Type_Series.JPG'>3. Character • Corrosion prevention with 100% hard rubber coating • To be used for hydrofluoric acid. ammonia. organic solvent • To be used to filter harmful slurry • To be widely used as. in particular PDP etching equipment • Since it is composed of gasket filter plate and CPVC manifold. it is easy to maintain by disassembly and assembly 4. Application • Etching (hydrofluoric acid) • Explosion-proof filter press |
Instrument & Chemicals | |
| 846 | JSBR (Sewage Treatment Equipment) | JSBR (Sewage Treatment Equipment) | Joeun Environment Co., Ltd. | http://www.rcf.kr | 1. Outline - In JSBR. a primary reactor under anaerobic condition and a secondary reactor under aerobic condition are composed in series. There is no scum and sludge spill as treated water under precipitation conditions after reaction is discharged into the upper part through a decanter. 2. Introduction 3. Characteristics - Minimizing the stress of microorganisms / Providing an environment suitable for growth and activities of microorganisms - Removal of nitrogen and organic matters in a reactor under an anaerobic condition - Removal of phosphorus and organic matters in a reactor under an aerobic condition - Preventing re-elution of phosphorus through the secondary treatment of an aerobic reaction - Improving stability through second-stage treatment 4. Application - Sewage Treatment |
Equipment |
| 847 | JUMBOTANK | JUMBOTANK | JUMBO KOREA | http://www.junbotank.com | 1. Outline - Double-wall Jumbo tank made of high density polyethylene (HDPE). 2. Introduction 3. Character - No risk of leakage. due to its high-strength structure of double-wall. It does not get distorted nor damaged while being transported or installed. It can withstand the weight of heavy vehicles. - Excellent for schedule improvement for it can be installed within a day work. Effective work place is secured - -No need for an concrete wall and because of a substation work for concrete structure. a construction period is short. Also. because of no need for anti-water work. construction costs can be hugely decreased. - Insulation effect is good because of a double-wall structure. Even in the water seasons. the walls are not frozen and microorganism treatment is excellent. - Because of strong resistance to strong acid. strong alkali and synthetic detergents. transformations of the material does not occur. 4. Application - Jumbo tank. |
Equipment |
| 848 | K2 IMAS process | K2 IMAS process | Kolon Environmental Service | http://www.kolon-kesco.com/ | 1. Outline - K2 IMAS process is economic in that it can reduce maintenance and administrative expenses. And also. it guarantees water quality and maximizes water quality improvement. K2 IMAS process enhances life quality as well as water quality. 2. Introduction 3. Characteristics - Use UF separation membranes - Produce safe and delicious water by completely removing pathogenic microorganisms and turbidity - Separation membrane system - Minimize a required area. - Reduce maintenance and administrative expenses - Securing a certain output and water quality regardless of raw water 4. Application - Water purification |
Technology & Process |
| 849 | KAS 2 | KAS 2 | Korea Envi-Tech Co., Ltd. | http://www.ket1999.com | 1. Outline - It washes wedged wire type screen by brush and scraper with the pressure difference of inlet and outlet of auto strainer and operation time by using fluid pressure of pipe and cyclone. In the process of screen washing (KAS2 - process to remove hitch and blockade when the pollutant of fluid pass the screen). the fluid is supplied continuously. Therefore. the processing water is recyclable and it can prevent the blockade of nozzle by installing at the pre-treatment process of precision filtration and front part of sparay nozzle. 2. Introduction 3. Characteristics - Continuous operation is available without stopping the process because it washes the surface of screen by timer and pressure difference of fluid during operation. - There is no blockade of screen because it uses the wedged wire type screen. - The piping is easy because the inlet and outlet nozzle are installed at the same line. In-situ installation is easy because it is manufactured by standing type structure. - Maintenance is convenient because the dissembling of drive unit and screen is easy. - It is good to suit the application uses due to the wide range of screen slot selection (50 - 100㎕) 4. Application - The reusing process of the first and second treated water of sewage and wastewater treatment plant - Circulating water filtration of cooling tower and heat exchanger - Recycling process of processing water - Pre-treatment of water-collecting process of groundwater. seawater and rivers - Pre-treatment of precision treatment (sand. ion exchanging tower and R.O.) - Prevention of blockade of various spray nozzle |
Equipment |
| 850 | KE-WACS | KE-WACS | Hientech Co., Ltd | http://www.hi-entech.com | 1. Outline - The technology. as the high-tech automation system to transport domestic wastes through underground pipes. involves the principle of vacuum absorption and aims to improve living conditions. 2. Introduction 3. Character - Domestic waste input facility. - Food waste input facility. - Transport tube. - Waste collection site. - Automatic monitoring of optical cable network & computer 4. Application - Automatic waste collection system. |
Equipment |
| 851 | KIMAS – MBR process | KIMAS – MBR process | Kolon Environmental Service | http://www.kolon-kesco.com/ | 1. Outline - KIMAS – MBR process is a wastewater treatment facility for sewageㆍwastewater reuse. A membrane which is recognized as an environmentally friendly water treatment technology is applied to the KIMAS – MBR process. 2. Introduction 3. Characteristics - An area required to install can be minimized - Simple process - Stable production of good treated water quality - Effective biological treatment - Reduce a sludge output by maintaining high concentrated MLSS - Improvement of nitrogen removal efficiency 4. Application - Wastewater treatment |
Technology & Process |
| 852 | Cooven System | Cooven System | ECTA Co., Ltd. | http://www.ecta.co.kr | 1. Outline - Deterioration of air cleanness in closed living space Odor and contaminated substance generating cooking at kitchen will be an offensive odor and harmful contaminated substance for health. when it’s concentration is getting higher by long-term accumulation. Accordingly. ventilation of accommodation is quite important to control the contaminated air at kitchen. The conventional range hood. as you are well aware. for kitchen ventilation has exhaust function only and it is not completely disposed the odor. contaminant and surplus heat being generated during cooking at kitchen. 2. Introduction - Necessity of new ideal high efficiency range hood Though conventional range hood has a big difficulty from the insufficient exhaust capacity. COOVEN is perfectly discharge the contaminant and surplus heat generated from cooking by using of one body system of air supply and exhaust at the same time and achieve the remarkable improvement as result of long-term research & development at the lab after numerous trial and error. You. therefore. install the COOVEN. new concept of kitchen ventilation. as a range hood at your kitchen from now on. 3. Characteristics - As one-body system of air supply and ventilation. it has excellent exhaust efficiency for the contaminants such as smell and heat generated form cooking. - Not additional air feed is required as it uses indoor air for supply. - As the most advanced kitchen ventilation system of new concept. it opens the new kitchen environment with the kitchen ventilation system for pleasant environment and energy saving. 4. Application - Principle of COANDA effect Heat and contaminated (Odor. CO. CO2 and etc.) air generated from cooking is induced to the exhaust part by use of primary supply air from air jet nozzle. | Energy |
| 853 | Kneader | Double Arm Kneading Mixer | Jangwoo Machinery Co., Ltd. | http://www.jangwoo.com | 1. Outline Double Arm kneading Mixer. so called. Kneader is a mixing device for high viscosity materials with batch mixer. Two blades are attached inside the double U shaped tank. and it spins in different speed. The materials are mixed by the spinning blade. Automatic or manual emission device. which extracts the products after mixture. is an extra emission device. It can provide steam or cooling water for heating and cooling. For throughput. 40~60% of the inside volume is enough. 2. Introduction 3. Characteristics 4. Application - Mix organic and non organic supply device of power - Mix pigment/dye and liquid resin. - Mix resin with non organic matters. - Mix high polymer materials (rubber. synthetic resin). |
Equipment |
| 854 | KPB-A Series (Automatic Deadweight Pressure Calibrator) | KPB-A Series (Automatic Deadweight Pressure Calibrator) | Korea Institution of Standard Technology (KIST) Co., Ltd. | http://www.kistco.kr/ | 1. Outline - KPB-A Series. a unique deadweight recognition device. is designed to automatically operate the repeated process of uploading a great deal of weight and enables highly reliable calibration and test evaluation for a relatively short period of time. In addition. the system prevents any measurement inaccuracy caused by the tilted weight-type gauge as well as any damage to the weight and equipment. In doing so. the system allows for stable and accurate measuring process. 2. Introduction 3. Characteristics - Secure economic feasibility - Ensure highly reliable calibration and test evaluation in a short period of time - Allow for a stable and accurate process 4. Application - Pressure calibration |
Equipment |
| 855 | KPB-M Series (Passive Deadweight Pressure Calibrator) | KPB-M Series (Passive Deadweight Pressure Calibrator) | KIST Co., Ltd. | http://www.kistco.kr/ | 1. Outline - KPB-M Series. an ordinary version of passive deadweight pressure calibrators. is used to calibrate a wide range of pressure. The system features a temperature sensor in the piston-cylinder to gauge temperatures. After loading weight-balance into the main body. pressing the mass button triggers automatic rotational movement and allows for easier use. 2. Introduction 3. Characteristics - Easy to calibrate a wide range of pressure. - Feasible to gauge temperatures - Easy to use 4. Application - Pressure calibration |
Equipment |
| 856 | KR System | KR System | KRsystem Co., Ltd | http://www.krsys.kr | 1. Outline - Environment-friendly organic waste materials fuel facility. 2. Introduction 3. Character - Low-cost and high-efficiency innovative operation system - Urban and environment-friendly system - Organic. sludge energy - Water content: 1% - Recycling fuel use system 4. Application - Sludge treatment |
Equipment |
| 857 | KSCR(KOLON Selective Catalytic Reaction) System | KSCR System | Kolon Engineering & Construction | http://www.kolonconstruction.co.kr | 1. Outline - It is a catalyst-using system to treat the nitrogen oxides and dioxin in the air pollution materials by making them harmless which are produced by the wastes incineration or fuel combustion. 2. Introduction 3. Characteristics - Ingredient of catalyst : CuHM. Fe/Co/La/Ce-CuHM - Porous catalyst of large surface area - High removal efficiency rate for NOx in the low temperature (more than 200℃. 90%) - Excellent durability for the acid gases such as hydrogen chloride - Proposal of energy saving process at the incinerating process 4. Application - Treatment of emission gases at the incinerating facility of urban wastes and industrial wastes - Removal and treatment of nitrogen dioxides in the emission gas of power generation plant - Emission gas treatment facility with wide range of temperature (180 - 400℃) |
Technology & Process |
| 858 | KSMBR Method | KSMBR Method | ES ENERGY Co., Ltd. | http://eses.co.kr/ | 1. Outline - This KSMBR Method is the advanced treatment technology that consists of an anaerobic tank. an alternative reaction tank which is operated by an aeration tank and a non-aeration tank repeatedly in the aligned condition in a parallel order. an aerobic tank designed to soak a polyolefin hollow fiber precise filter membrane and a dissolved oxygen reduction tank designed to treat organic matters. nitrogen and phosphorus. 2. Introduction 3. Characteristics - Minimize separation membrane fouling by featuring an efficient module type and an operation system. - Stands out in tensile strength of a hollow fiber membrane by featuring a high-tech method. - Hardly show any decrease in separation membrane performance because of the use of chemical-resistant membrane materials. - Reduce project cost and site area because it obviates the need for settlement. filtering and sterilization. - Reduce treatment cost due to 1Q’s sludge return and a smaller amount of superfluous sludge. - Make it easier to wash and maintain. -Enable remote-controlling due to the establishment of a TMS through the internet. - Enable the operation only through a pressure gauge and a flow checker. 4. Application -Water treatment |
Technology & Process |
| 859 | LABIRINS finned channel separator | LABIRINS finned channel separator | Hyorim Industries Inc. | http://www.hyorim.co.kr | 1. Outline - LABIRINS finned channel separator separates the floc particles by using the fluid drag and inertial force generating the vortex without the gravity. The conventional finned channel separator. finned pipe and high speed sediment device sediments the flocs by only using the gravity. 2. Introduction 3. Characteristics - It separates the flocs by vortex generating by the fin attached at the inclined plate. - It is able to reduce the sediment time of flocs by 1/4 compared to the general inclined plate. - It reduces the load of basin because it is available to remove the minute flocs. - It is able to reduce the construction cost and minimize the additional facility because it can reduce the sediment basin widely. - It contributes to the increase of treatment amount and the promotion of treated water quality by installing the conventional sediment basin. - It is suitable to the standard of hygienic safety and it uses the HPVC which is not modified and destroyed by the outer shock. 4. Application - Village sewage treatment plant - Household wastewater/wastewater treatment plant - Water purification plant - Village waterworks |
Equipment |
| 860 | LAF (Floatation) | LAF (Floatation) | Energy & Environment Technology Co., Ltd. | http://www.enetcom.co.kr | 1. Outline - This LAF (Floatation) is designed to remove scum that floats by making vapors minute under low pressure with the help of a MB Chamber. reducing a hydrophile property of pollutants. attaching the minute vapors to the substance and then decreasing the proportion to less than the water. 2. Introduction 3. Characteristics - Low pressure ㆍLess than 2Kg/cm3 ㆍNo need for an air compressor ㆍReduction of pump power - Minute vapors ㆍSize of 40 - 120um ㆍLow floatation speed ㆍIncrease of the ability to attach solid substances - Economic feasibility ㆍDecrease in construction cost and site area ㆍEast to maintain ㆍMinimized maintenance cost 4. Application - Sludge enrichment - Treatment of waste water from paper manufacturing - Treatment of excreta. livestock waste water and food leachate - Water treatment and purification of lakes and wetlands |
Equipment |
| 861 | Lake Dredging and Water Purification Technology | Lake Dredging and Water Purification Technology | Daesin Entech Co, Ltd. | http://www.ds-entech.co.kr | 1. Outline - Apply micro bubble floatation to remove algae in lake deposits. - Apply coagulation-floatation technology to treat phosphorus that causes eutrophication. - Use a specially designed suction for floatating lake sediments without making them floated again. 2. Introduction 3. Character - Use a specially designed suction to get sediments without damaging water-proof sheet. - Dehydrate the dredged deposits on spot thereby reducing the amount of sludge to be transported. - Reduce phosphorus discharge due to sediment dredging. which in turn contains algae caused by eutrophication. - Increase DO concentration in lake deposits and prevent phosphorus discharge by using micro bubble coagulation-floatation technology. 4. Application - Golf club. - Lake park. - Stream and river. - Reservoir. |
Technology & Process |
| 862 | Lake water purification system | Air purification type lake water purification system | EcoBio Co., Ltd. | http://www.ecobiobiz.com | 1. Outline It has an effect for completely overturning water inside lake by sucking up on the ground after mixing spoiled water of the piled layer with oxygen in the air(circulation effect). thereby facilitating photosynthesis of the spoiled water of the piled layer to double self-purification capacity of water. |
Evaluation & Analysis |
| 863 | Lake Water Purification System | Daesung Engineering Corp. | http://www.dseco.co.kr | 1. Outline • It is a lake water purification system for artificial wetlands and artificial vegetation floating islands that use natural vegetation. • To maximize the efficiency of this lake restoration system. both the raw functions of nature and human efforts must be utilized. 2. Introduction 14Biz-97.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-97.JPG'>3. Character • It is used for the removal of nitrogen and phosphorus in water purification plants. • It enhances the DO (dissolved oxygen) and creates biohabitats. • Its method restores the river ecosystem to near natural environment status through the use of natural materials. such as living trees. grass. and soil. as well as some artificial materials. • It can be used for the efficient management of biohabitats for fish. birds. aquatic insects. amphibians. and reptiles by restoring the front vegetation of river waters. 4. Application • Water purification for stream inflow and eco-river restoration • Washlands for water purification • Submerged weirs for the preservation of the ecosystem • Settling fields • Riprap framework • Artificial wetlands |
Equipment | |
| 864 | Lamella | Lamella | ATE Co., Ltd. | http://www.atecorp.co.kr/ | 1. Outline • The Lamella Gravity Settler. like most coagulation equipment. uses inclination plates and gravitational force to settle materials but has increased water purification efficiency with denser solids. • Available as a settling basin and as an enrichment facility for sewage disposal and water purification plants. the gravity settler can remove suspended solids (SS) from influent water by decreasing loads on the water area with the use of an inclination plate. 2. Introduction 14Biz-64.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-64.JPG'>3. Character • Compact structure (minimizes installation area) • Installation of an inclination plate to maximize the settling rate of solid matters • Does not require the injection of chemicals • Low head loss (5–10-cm H2O) • Allows the application of different materials (STS. FRP) • 30–50% less installation costs compared to conventional clarifiers • Easy to operate and applies selective operation management depending on water quality condition • Secures stable water quality • Can be used for wastewater reuse pretreatment device • Unique flow distribution: minimizes the risk of short-circuit failures and erratic flow patterns caused by wind. freezing. and fluid-temperature changes • Low maintenance costs: has few parts to wear. replace. or adjust 4. Application • Sewage treatment • Wastewater treatment • Water purification plants • Water treatment |
Eco-Friendly Products |
| 865 | Lamella EcoFlow | Lamella EcoFlow | ATE Co., Ltd. | http://www.atecorp.co.kr/ | 1. Outline - This Lamella EcoFlow is a high-rate coagulative precipitation unit using a swash plate. The higher density of solid matters is. the better sedimentation efficiency is because process of separation of solid matters and liquid that uses gravity is made when operating the equipment. The Lamella EcoFlow can be applied as a sedimentation basin and concentration equipment in sewageㆍwastewater treatment plants and purification plants. This Lamella EcoFlow removes SS in the extraneous water by reducing a water surface load using a swash plate. 2. Introduction 3. Characteristics - Compact structure (a site required can be minimized) - Installation of a swash plate for maximizing settling solid matters - Using a sedimentation basin without injection of chemicals is possible - Low head loss - Various materials (e.g. STS. FRP ) can be applied - Installation charge can be saved by 30~50% compared with a general settling tank - Easy to operate according to water quality conditions and selective operation management is possible. - Securing stability of treated water quality and reuse pretreatment equipment is possible. - Minimizing irregular flow due to changes in wind. freezing and water temperature with unique flow distribution. - Low maintenance and administration expense : cost required to replace or adjust is low. 4. Application - Sedimentation Equipment |
Technology & Process |
| 866 | Land Farming | Land Farming | SHINGANG HI-TECH Co. ,Ltd | http://www.sgenv.kr/ | 1. Outline This Land Farming is an aerobic biodegradation process which feeds the air to the contaminated soil by regularly upside-downing the spread soil after excavation of contaminated soil. This product is the land farming equipment which is developed as the processor equipped with a backhoe. Also. attached with a backhoe for construction. it crushes the ground by depth and sprays steam and chemicals. Therefore. it is a kind of an alternative device to reduce the labor load of the traditional agriculture tractors and backhoe works. In particular. it is specially designed to be mounted on the existing backhoe which is widely used in the construction sites. 2. Introduction 3. Characteristics - Provide a fine crushing effect with the control of rotational speed and position depending on the natures of soils - Volatilize VOCs with the high-temperature steam injection and also facilitate a microbial activity with oxygen supply into the soil pores - Provide the convenience and stability of chemical oxidation work for heavily contaminated soil - Reduce the farming operation and labor cost with auto control of chemical spray - Provide a high mixture effect of chemicals with gas/liquid spray to the ground or underground - Provide a fine farming effect to the sludge-state clay soil - Large volume of open-air stored soil (farming more than 1m in a short period) - Maximize the microbial activity with proper temperature control in winter seasons 4. Application - Soil purification |
Technology & Process |
| 867 | Landfill Facility | Landfill Facility | ES Cheongwon Co.,Ltd | http://jhgb.co.kr | 1. Outline - It is dome-shaped structure making up an indoor space by using an air gap structure. Internally there are no pillars. Based on structural calculation. design. manufacturing and construction are implemented and only involve certified materials. 2. Introduction **What is lacerate? Dirty water produced from final waste water treatment plant Water tank. sinking basin. waterflow adjustment tank. reaction tank. cohesion tank. sinking tank. discharge tank. dehydrator and cake Sewage treatment plant export 3. Character - The structure. just like other architectures. may gain approval and warrant safety and potential defects and is designed. manufactured and built based on aerial data accumulated over the past 10 years. - No restriction in installation area. Air dome may be built during a short period of time on weak ground. uneven ground. mountainous area. rooftop through connection with other buildings. The structure boasting cost-effectiveness and construction feasibility Project cost reduced following a shortened period of constriction period due to lighter weight and assemblage. 4. Application - Landfill facility |
Technology & Process |
| 868 | Landfill Gas Analyzer | LMSxi | KEMIK CORPORATION | http://www.kemik.kr | 1. Outline - Robust and convenient portable small sized gas analyzer which performs the system management and the analysis of anaerobic as well as aerobic gases. gas generated from wastewater and sewage sludge at the landfill site and etc. 2. Introduction 3. Characteristics - Robust and convenient portable small sized gas analyzer - Automated Zero point Adjustability - Possible to measure velocity. flow rate. flow pressure. constant pressure. differential pressure as optional functions. - With the Instant Pause Function. it is possible to compare between the measured values - Minimization of Down Time / Maximization of Energy Production 4. Application - Landfill Site System Management - Analysis of Anaerobic As Well As Aerobic Gases - Measurement of Gas Generated from the Livestock Sludge and Composting Process - Sewage Sludge Gas Analysis |
Equipment |
| 869 | Landfill Gas Recycling Facility | Landfill Gas Recycling Facility | GETEC Co., Ltd. | http://kor.getec21.com | 1. Outline • This recycling facility for the fuel of boilers and power plants collects and refines gases generated from an organic waste landfill. 2. Introduction 14Biz-84.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-84.JPG'>3. Character • Simplifies the installation space and has a high processing efficiency • Increases the gas–liquid separation effect by changing the filtering materials of the filter to have a rationalization of gas use and supplementary facilities with high durability • Allows water to absorb gases to remove it by installing many punched bubble-cap towers to increase the density of methane and the caloric value 4. Applications • Landfill • Landfill gas recycling facility |
Equipment |
| 870 | Laputa (Mobile Sludge Treatment Equipment) | Laputa (Mobile Sludge Treatment Equipment) | ARK Co., Ltd. | http://ar-korea.com/ | 1. Outline • This mobile sludge treatment equipment can be widely used for sludge thickening and dehydration in small wastewater treatment plants. wastewater treatment plants with a different dehydration capacity by season. and bulking sludge treatment plants. • It is a low-noise. non-vibrating. unmanned. and power-saving mobile sludge treatment device in which the percentage of water content and the collection rate are constant. 2. Introduction 14Biz-61.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-61.jpg'>3. Character • Stable and efficient dehydration regardless of the sludge type • Stable dehydration from mild (2.000ppm) to strong concentrations • Low percentage of water content (below 80%) • High recovery rate of solid matter (over 95%) • Minimal to zero wash water • Low building costs because there is no need to build a thickener • Low transportation and maintenance costs because a separate sludge transportation vehicle is unnecessary 4. Application • Dehydrator • Thickener • Sludge storage tank • Supply pump • Control panel • High-molecule coagulant dissolution tank • Injection pump • SUTE & CAKE BOX |
Equipment |
| 871 | Large scale water treatment module | Large scale water treatment module | PhilosG.C Co., Ltd. | http://www.philosmembrane.com | 1. Outline - This UF membrane module is excellent at separating and concentrating particulate matters and matters with low molecular weight as well as at treating industrial water. Hollow fiber membranes with a dual structure that contains dense skins have excellent structural strength which can be resistant to high temperature. 2. Introduction 3. Character - Excellent throughput and stable water quality. ㆍBecause UF membrane using hydrophilic PES employs a filtration method using uniform pores. it helps maintain perfect and stable water quality which is applicable to treating waste and producing pure water. - Stable supply of filtrate ㆍUnlike a media filter that is required to stop running for a long time for back washing due to repetition of filtration and backwashing. this module enables water to be supplied to a RO system in a stable way. 4. Application - Supply of industrial water - Production of pure water and sterile water - RO pretreatment - Pretreatment of an ion exchange resin process - Industrial waste water treatment - Treatment of water for industrial process |
Equipment |
| 872 | Large-Scale Deodorization Facility | Large-Scale Deodorization Facility | Biozone Korea Co., Ltd. | http://www.biozonekorea.com | 1. Outline - A large unit of deodorization facility. 2. Introduction 3. Character - A dry-type of large-scale deodorization plants if a photo-plasma generation device and a next-generation bag filter converges. - Field design can optimize the facility for the deodorization of gaseous odor. and remove certain chemical substances with 100 % efficiency. - The removal efficiency falls for a very high humidity environment. - Able to operate the process with a filter for primary adsorption. and photo-plasma for secondary decomposition. - Applicable to organic compounds and inorganic compounds. - Make up for the pressure loss by existing HEPA filters and carbon filters. - Effects to improve or replace electrostatic precipitators or deodorization facilities in operation. 4. Application - Large-scale treatment facilities |
Equipment |
| 873 | Laser Ammonia Leaked Detector | FDL-7(NH3) | SUNDOO Electronics Co. | http://sdtron.co.kr/english | This product is the first time in the world is an ammonia gas in a gas leak detection device that can remotely be detected. You can easily detect the gas leaked from a distance of about 20m or hard to reach a high place. FDL-7(NH₃) gives to user safety and maintenance costs decrease as well as examination time shortening. -Can detect leaked ammonia gas from a distance of up to 20meters. -Any one can use and carry easily because of migrated body and optics. -It is possible to reliably measure without difference based on temperature signals with built-in temperature compensation circuit. | Equipment |
| 874 | Particle Counter | Da All Eng | http://daalleng.kr/ | 1. PRODUCT DETAILS This sophisticated particle counter uses state-of-the-art. water-based condensation technology and features the highest activation energy and lowest detectable particle size of the WCPC family. With less than 0.1 second rise time. the Model 3788 is the fastest CPC commercially available and its high sample flow rate provides low diffusion losses and low Poisson noise. Other important elements include a thermodynamically optimized growth region and enhanced optical and detection design for impressive signal-to-noise ratios. 2. FEATURES AND BENEFITS 2.5 nanometer detection Single particle counting to 4 x 10 5 particles/cm 3 < 100 millisecond rise time response Sheath flow with high aerosol flow rate for enhanced counting statistics Convenient. eco-friendly water as working fluid 1⁄10 th second data reporting Built-in SMPS™ spectrometer compatibility USB flash drive data storage option Built in Ethernet capability 6 color touch screen with graphical interface 3. APPLICATIONS Particle formation and growth studies Nanotechnology research or process monitoring Inhalation or exposure chamber studies Combustion and engine exhaust studies | Equipment | |
| 875 | Laser Methane Leaked Detector | FDL-7 | SUNDOO Electronics Co. | http://sdtron.co.kr/english | This product is a remote gas leak detection equipment. We developed this product collaboration with Korea Gas Safety Corporation(KGS). You can easily detect the gas leaked from a distance of about 30m or hard to reach a high place. FDL-7 gives to user safety and maintenance costs decrease as well as examination time shortening. -Can detect leaked methane gas from a distance of up to 30meters. -Any one can use and carry easily because of migrated body and optics. -It is possible to reliably measure without difference based on temperature signals with built-in temperature compensation circuit. | Equipment |
| 876 | Laundry Ball | Laundry Ball | Ecozone Inc. | www.ecoz.co.kr | <div> </div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l0 level1 lfo1><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>- Features: By using our laundry balls you can be free from these problems; Irreparable risk to health caused by a prolonged exposure to detergent surfactants such as reproductive dysfunction and cancer. Skin irritation and atopy caused by detergent residue on clothing.</span></div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l2 level1 lfo3><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l2 level1 lfo3><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>- Duration: 1 year or more</span></div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l2 level1 lfo3><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>Usage Instruction: (1) Place the ball into the laundry machine (2) Start the water (3) Place laundry items (4) Give 5 minutes to soak. (5) Start the washing cycle. </span></div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l3 level1 lfo4><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l3 level1 lfo4><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>- Effect: Water conservation without the need of rinsing off detergent. prevention of skin problems. protect environment. Prevent skin irritation.</span></div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l3 level1 lfo4><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> | Eco-Friendly Products |
| 877 | LBOD IntelliCAL Probe_HQ Series | LBOD IntelliCAL Probe_HQ Series | YUILLAP TECH CO., LTD | http://www.yuillab.com | 1. Outline Hach’s new LBOD IntelliCAL probe has all features of LDO and is equipped with an agitator for BOD measurement. 2. Introduction 3. Characteristics - Calibration History stays with the probe ㆍEach IntelliCAL probe saves the calibration history to reduce frequent changes and calibration. Serial number is also saved for perfect traceability and official reporting. - Ready to Use ㆍIntelliCAL probe calibrated at a factory can be used immediately without additional process. It also informs users about the time when it needs to be calibrated. - Versatile and Durable ㆍAll IntelliCAL probes can be used for 24 hours. and need no additional calibration when being changed. ㆍCan be used in different places as it is provided with cables with various lengths of 1~3M ㆍSensor identification is different as it is provided with rings in different colors ㆍRugged probe which cannot be destroyed boasts high durability as it is reinforced with metal strings. and need no maintenance or repair. 4. Application - Water quality analysis |
Equipment |
| 878 | LC-OCD-OND | LC-OCD-OND | Korea ATIK Co., Ltd. | http://atikorea.com | 1. Outline - LC-OCD-OND System-Liquid Chromatography-Organic Carbon Detection-Organic Nitrogen Detector System 2. Introduction 3. Characteristics - Analysis of low-concentration organic matters which exist in the water including NOMs and SOMs. - A separation & organic carbon detector using Liquid Chromatography. - Effective oxidation of organic matters using a UV185nm Thin Film Reactor (TFR). - Specific display of each chemical component composed of organic matters as a peak for each section. - Equipped with a Cooling Auto Sampler. - Real-time consecutive automatic analysis - Software for automatic qualitative and quantitative analysis. - Application for measuring and assessing organic matters for each stage for the production of reclaimed water and various water treatment process systems. - Biopolymers. Humic substances and LMW-organic materials. etc. 4. Application - Analysis of Underwater Organic Matterss |
Equipment |
| 879 | AAR method for processing leachate in a reclaimed land | AAR (Anaerobic-Anoxic/Aerobic-RO) | Environmental Vision 21 Ltd. | http://www.ev21.co.kr | 1. Outline For the purpose of processing leachate in a reclaimed land. a process in which a biological process and a physical process are combined is flexibly operated depending on the concentration of leachate. Un-processed noxious materials are separated and concentrated water is circulated to the reclaimed layer so that it is naturally decomposed. 2. Introduction As the load of organic substance of leachate and nitrogen is changed depending on a period of a reclaimed land. processing efficiency is maximized by flexibly operating an anaerobic digester as an anaerobic digester or a denitrification zone. Unprocessed non-biodegradable COD and nitrate nitrogen are separated through VSEP RO. Concentrated water is circulated in a reclaimed layer so that it is naturally decomposed in an anaerobic condition. Therefore. the anaerobic digester is initially operated to process an organic substance of a high concentration. If the concentration of the organic substance is lowered. the anaerobic digester is operated as the anoxic denitrification zone. <Main functions per unit process> 1. Process : Anaerobic digester 2. Special features Organic material removal and carbon supply by forming organic acidsMethane gas formation due to anaerobic microorganism activitiesFlexible operation as both anaerobic digester and denitrification tank 3. Anoxic tank Organic substances and NOx-N removal through denitrification processAdditional NOx-N removal through endogenous denitrification 4. Aerobic tank Nitrification processRemoves remaining organic material efficiently 5. VSEP RO system Removes color. TDS. refractory organics and remaining nitrogen 3. Characteristics 1) Maintain the water quality of stable outflow water through combination of an effective and smooth biological processing process and a RO process for high concentration and non-biodegradable leachate treatment. 2) Do not discharge secondary pollutants such as non-biodegradable COD. nitrate nitrogen. etc. and induces natural decomposition within a reclaimed land 3) Process change that can actively cope with change in water quality of leachate depending on a period of a reclaimed land 4) Effectively remove non-biodegradable organic substance and nitrate nitrogen components that are not removed in a biological process using a VSEP RO system (a process of re-spraying concentrated water onto a reclaimed land in order to induce natural decomposition) 5) The VSEP RO system is designed to apply strong vibration to a film surface. thus reducing contamination of the film. and to lengthen the life of the film and a replacement period. Thus. the system can be effectively and economically operated. 6) It is possible to maintain water quality of stale outflow water and completely process pollutants within a reclaimed land. 4. Applications 1) Various waste filling-up places 2) Waste matter filling-up places | Technology & Process |
| 880 | Leak Detection System | Leak Detection System | JKDTECH CO., LTD | http://www.jkdtech.com | 1. Outline Leak Detection System is a system that quickly reports a leaking spot by detecting the leak of different types of liquid such as oil and water. It is a system optimized for prevention of equipment damage caused by a leak and for minimization of environmental pollution through leak detection at the early stage as the leak of chemicals and oil results in serious environmental pollution. 2. Introduction The detection of a conductible liquid such as water can be done as the flow of electricity current. which uses the leaking water or conductible liquid as an electrolyte. changes due to the electric reaction between Sensor Wires. Therefore. the leaking point can be precisely detected. 3. Characteristics - An oil or water leaking spot is displayed on the LCD screen with other information. - It performs accurate and reliable detection of oil or water leaks based on electro-chemical principles. - It can be easily installed and maintained as all the systems are modulated. - It is easy to install with flexible cable. - It is easy to make changes in design or building use. - It satisfies the users by providing various monitoring systems. - It has semi-permanent life span as the leak sensing cable can be reused after detection. 4. Application - Telephone offices and operation rooms : Protects equipments from leaks of upper and lower pipe - Underground Pipes : Prevents environmental pollution caused by leak of harmful substances at the initial stage through installation of sensor wires - Museums and data storage rooms : Protects exhibition and important data from leaks - Oil and chemical tanks : Prevents soil pollution by detecting leaks from tanks in the early stage. |
Instrument & Chemicals |
| 881 | LED Bulb Lights | LED Bulb Lights | EO Technology Co., Ltd. | http://www.eotec.kr/ | 1. Outline - LED Bulb Lights made by EO Technology Co.. Ltd. is an optimal. compatible interior lighting lamp and is suitable for urban residential place including parks and pedestrian passages. In addition. the LED Room Lights is a LED product that features energy saving and economic lighting due to its long lifespan and environmental-friendliness. 2. Introduction 3. Characteristics - It is suitable for urban residential place including parks and pedestrian passages. - It is possible to create luxurious atmosphere due to various color temperatures and high color rendition. - Saving energy of about 53% compared to existing 150W park lights as it has power consumption of 40 W. - Saving cooling cost due to a high efficiency technology and optimal thermal design. - Use of more than 50.000 hours. - Saving replacement cost and electricity cost. - Effect of reduction in greenhouse gas (CO2) emissions. 4. Application - Lighting for Parks and Pedestrian Passages. |
Equipment |
| 882 | LED Down Lights | LED Down Lights | EO Technology Co., Ltd. | http://www.eotec.kr/ | 1. Outline - The LED Down Lights made by EO Technology Co.. Ltd. is an optimal. compatible interior lighting product. LED product that features energy saving and economic lighting due to its long lifespan and environmental-friendliness. 2. Introduction 3. Characteristics - It can be compatible with existing down lights. -It is possible to create a luxurious interior atmosphere due to various color temperatures and high color rendition. - Saving energy of about 54% compared to existing 26W CFL lamps as it has power consumption of 12 W. - Saving cooling costs due to a high efficiency technology and optimal thermal design. - Use of more than 50.000 hours. - Saving replacement cost and electricity cost. - Effect of reduction in greenhouse gas (CO2) emissions 4. Application - LED Lamp |
Equipment |
| 883 | LED LAMP | LED LAMP | ILKWANG Electronics Co. | http://ilkwang21.en.ec21.com/ | lkwang electronics industry co.. ltd. is established in 1996. have business practice of Catching fire union(人和團結).responsibility successful execution(責任完遂).development(創意開發) of window. and that open new a session of 21C's Korea electron parts industry and guide electronics industry of world inside new thousand years come already to be organized in infinite possibility constantly challenge . Ilkwang electronics industry co.. ltd. officer and employee's each person are trying in ceaseless skill development and quality innovation by attitude that make the superlative quality by thorough service mind about penetrating master's expression and guest. | Eco-Friendly Products |
| 884 | LED Room Lights | LED Room Lights | EO Technology Co., Ltd. | http://www.eotec.kr/ | 1. Outline - LED Room Lights made by EO Technology Co.. Ltd. is an optimal. compatible interior lighting lamp and is suitable for residential space including rooms. living rooms and offices. In addition. LED Room Lights is a LED product that features energy saving. economic lighting due to its long lifespan and environmental-friendliness. 2. Introduction 3. Characteristics - It is suitable for residential space including rooms. living rooms and offices. - It is possible to create luxurious interior atmosphere due to various color temperatures and high color rendition. - Saving energy of about 53% compared to existing 64W fluorescent lamps as it has power consumption of 30 W. - Saving cooling cost due to a high efficiency technology and optimal thermal design. - Use of more than 50.000 hours. - Saving replacement cost and electricity cost. - Effect of reduction in greenhouse gas (CO2) emissions. 4. Application - Lighting for Residential Space. |
Equipment |
| 885 | LED Streetlight 30W | LED Streetlight 30W | Urban EnvironmentENG.co.Ltd | Product Description 1. Tremendous Energy Savings Uses 50~80% less energy than traditional sodium and mercury lamps 2. Long Life(~50.000 hours) Working for 10 hours per day. it can last more than 13 years (5~10 times longer than traditional sodium and mercury lamps) 3. Revolutionary Photometric Design Precise control of light distribution. a rectangular-spot beam pattern. and Ideal uniformity of brightness on road surface eliminate glare and light pollution 4. Creative Integration of Radiator and Lamp Holder Unique casing protects the life the LEDs through proper heat dissipation 5. Unique Thermal Slide-Shell Design Easy to install and easy to dismantle for repair or replacement 6. Intelligent Current Control and Driver Protection 7. No Adverse Glare Improves driving safety and reduce the incidence of traffic accidents By eliminating glare and visual fatigue 8. No High Voltage. No High Temperature Eliminate dust absorption and the common “yellowing” of traditional light Shades due to very high operation voltage and temperature 9. No Ultraviolet(UV) or Infrared(IR) Radiation LEDs emit a very narrow spectrum of visible light. no UV or IR radiation is produced 10. High CRI Rating : Renders colors well 11. Environmentally Friendly : No lead. no mercury. no toxic components Product Feature Item : 30W Input Voltage : AC88~265V Frequency Range : 50~60Hz Power Factor : >0.95 Total Harmonic Distortion (THD) : <20% Power Efficiency : >85% LED Working Voltage : 24VDC LED Luminous Efficiency : 90 lm/W Illumination : >10 lx(Ave 6M) Color Index(CRI) : Ra>70 Junction Temperature(Tj) : 64℃ Working Temperature : -40~60℃ Working Life : >50.000Hr Dimensions(mm) : 300*400 Net Weight(kg) : 1.8 IP Rating : IP55 Product Specification / Models 30W LED Guard Lampe Size : 300*400 Application LED streetlight using high efficiency LED chips are widely used in such as a road. footpath. promenade. and park etc. | Eco-Friendly Products | |
| 886 | Lemis-densimeter | DC-30 SERIES | Modern Environment Technology | www.met21.co.kr | 1. Outline - Lemis Process uses a proved vibration technology. which is known for measuring density accurately and sequentially. It is based on the frequent change of a sensitive unit. Vibration cycle is mainly dependant on the density and temperature of measured liquid and sequential monitoring optimizes the process. operation. and management. In addition. it has a broad applicability. 2. Introduction 3. Characteristics - Wide applicability - Sequential measurement - Easy cleaning - High accuracy - Easy installation - Suitable for viscous liquids - Automatic temperature compensation - Thorough process test 4. Application - Measurement of density |
Equipment |
| 887 | Level meter | SLM800S/1200S ultrasonic level meter | IS Technologies Co., Ltd | http://www.istec21.com | 1. Outline A SONDAR SLM series SONDAR SLM series is a highly developed ultrasonic level measurement system that can measure a level of liquid and solid in a non-contacting type. SONDAR SLM series is designed so that level measurement and maintenance can be easily. rapidly and simple performed. 2. Introduction Two open collector TR switches has a function to control a relay control and also has a function to inform a user of a malfunction by dividing a current output value in a malfunction operation and a normal output. The SONDAR SLM series is based on an operating principle that measures time when a pulse of an emitted ultrasonic wave is returned from an object (usually liquid surface) to calculate a distance between a sensor and the object. and then converts the distance into a level. 3. Characteristics 1) High reliability: Applied various applications by the application of a unique algorithm (liquid. liquid phase) 2) Applied various kinds of liquids and semi-permanent due to non-contact type 3) Built-in temperature compensation sensor A temperature compensation sensor disposed at the bottom of a sensor senses variation in temperature to automatically correct sound of an ultrasonic wave. 4) Reverse function of 4~20 mA/20~4 mA output An output signal of a level meter can be reversed. and a level and a distance from an object can be simply measured. 5) Remote monitoring of malfunction since currents in an malfunction operation is differently outputted depending on a setting (3.8 mA or 21 mA) 6) Arbitrary selection of dead zone A dead zone can be arbitrarily selected depending on application environments. an excellent spot adaptability is provided. 4. Applications 1) Water treatment works - sewage treatment works. sewage treatment works. water purifying works. drainage works. pressurization works. rain water pump works. apartment water tanks. and the like. 2) Plant works - various liquid phase tanks (various mixing tanks. etc.) | Equipment |
| 888 | Level meter | SLM300S/800S ultrasonic level meter | IS Technologies Co., Ltd. | http://www.istec21.com | 1. Outline SONDAR SLM series is a highly developed ultrasonic level measurement system that can measure a level of liquid and solid in a non-contacting type. SONDAR SLM series is designed so that level measurement and maintenance can be easily. rapidly and simple performed. 2. Introduction Two open collector TR switches has a function to control a relay control and also has a function to inform a user of a malfunction by dividing a current output value in a malfunction operation and a normal output. The SONDAR SLM series is based on an operating principle that measures time when a pulse of an emitted ultrasonic wave is returned from an object (usually liquid surface) to calculate a distance between a sensor and the object. and then converts the distance into a level. 3. Characteristics 1) Implementation of high accuracy through adoption of a high frequency ultrasonic sensor: ±0.2% 2) Convenient setting function by a button mode and a LDC display basically built therein 3) Convenient confirmation of an operating state and display at an actual spot through the use of a translucent window 4) Completed waterproof/ignition proof of IP67 5) Easy use with simple setting mode: An operating mode can be easily set by four buttons. and reflection reliability and temperature are displayed. 6) Display of actual spot with an integrated type 7) Display at an actual spot though a translucent window 8) Temperature sensor built therein: Temperature compensation sensor for sensing variation in temperature 9) Remote measurement: Allow remote measurement without influence from noise source in a two-wire mode 4. Applications 1) Water treatment fields - Open channel type flow meter - Level measurement in water purifying works. drainage works. etc. 2) Plant fields - Level measurement within a mixed tank - Various liquid phase tanks | Equipment |
| 889 | LGS (High-Speed Precipitator) | LGS (High-Speed Precipitator) | Energy & Environment Technology Co., Ltd. | http://www.enetcom.co.kr | 1. Outline - In contrast with existing precipitators. this LGS (high-speed precipitator) has few parts to replace or adjust and minimizes shock that occurs from changes in flow in the wake of changing weather conditions. The prime feature of the LGS lies in evenly spreading waste water to a sloping panel. In doing so. the technology copes with changes in flow and prevents a tilted overload. 2. Introduction 3. Characteristics - Decrease in installation area - Decrease in the site installation cost - Easy to maintain - Equal spread of waste water 4. Application - Waste Water from steelmaking facilities. CPI Process and wastewater -Purification of lakes and wetlands as well as rivers - Power stations and cooling towers - Treatment of polluted water sewage water and waste water - Recycling of paper manufacturing process |
Equipment |
| 890 | Lidar Monitoring System | Lidar Aerosols Monitoring System | SIBATA CO., Ltd | http://www.sibata.co.kr | 1. Outline The yellow sands spiraling high into the air driven by air currents should be measured through a high-altitude observation. Given that the existing monitoring systems have the limitation in determining mist or yellow sands from the ground-based station. this brand new Lidar device was developed to make it possible to realize a high-altitude observation on a real time basis. 2. Introduction 3. Characteristics - Simple installation thanks to the small size and light weight - Automatic observation to identify the status of aerosol at a high altitude under PC control - Enabling remote control. monitoring and data collection with the use of telephone circuit lines and internet cables - Enabling identification of the status of aerosol through the central control of a multiple observation center 4. Application - Measurement of air pollution |
Equipment |
| 891 | Liquid Catalyst Oxidizing Facility | Donglim Engineering Co., Ltd. | http://www.donglim-eng.co.kr/ | 1. Outline - Liquid catalyst oxidizing facility removes VOCs or odor. making use of redox reaction of catalyst after contacting the liquid catalyst with water-soluble odor emitting gas for ionization. 2. Introduction 3. Characteristics - The lifetime of liquid is semi-permanent (Redox reaction is repeated.) - Iron chelate is prevented from being disintegrated through stabilizer. - No secondary pollution - Consecutive operation is possible and operating cost is cheap. 4. Application - Liquid catalyst deoxidization |
Technology & Process | |
| 892 | Livestock Manure Resource | LIVESTOCK MANURE RESOURCE PLANT | YOUIL ENSYS CO., LTD. | http://www.youil.com | 1. Outline Livestock night soil with a large quantity of organic matter. nitrogen and phosphorous can contaminate the soil and subterranean water. But properly treating the livestock night soil. it can be a quality fertilizer with the abundant nitrogen. phosphorous and potassium. This is an environmental friendly treatment system fermenting the livestock night soil naturally without any external agents. 2. Introduction(See Fig 1) <Fig 1. Process Chart> (1) Pre-processing process Sludge is separated into solid and liquid (solid/liquid separation: using a compression roller mode of a simple structure) (2) Fermentation process - Solid matter fermentation: Air supply and temperature of solid body separated in the pre-processing process (solid/liquid separator is controlled so that fermentation can occur within 5 ~ 7 days as aerobic microorganism materials (usually strains are Bachilus-Schtilis. Aspergillus-Oryzae. etc.) are mixed in raw materials that are controlled to have a moisture content of 75% or less. - Liquid fertilizer fermentation: a shell. a shell stiffener. a special bolt for assembly. an air supply system. a delivery pump. etc. An oxygen supply apparatus supplies an adequate amount of oxygen to generate fine bubble. thus causing aerobic fermentation to produce mature and stable liquid fertilizer. (3) Post-processing process: deodorization. secondary selection. post-mature. measure. and packaging. 3. Characteristics (1) Environment-friendly facility: non-wastewater and non-discharge system (2) Economic construction cost - Aerobic fermentation method by local microorganism. and low operating cost (3) Valuable products - Separated solid components are fermented by a sealed high-speed fermentation machine (YS-50) and are then pulverized into fine powder. The treatment plant becomes an income generating plant selling and manufacturing the pot for nursery plant and pellet compost mixing the compost. which is fermented by YS-50 with bentonite and zeolites. - The liquid component becomes a commodity as liquid fertilizer. which is mixed with an amino acid and the like. to be able to supply to the farmhouse and floricultural house. 4. Applications Livestock wastewater processing plant | Technology & Process |
| 893 | Livestock wastewater treatment process | Seshinclean Co., Ltd. | http://www.seshinclean.co.kr | 1. Outline - In livestock wastewater. there is livestock’s’ excrement. washing water and feed waste. The amount of waste is affected by the kinds. ages. weights of livestock and the size and the condition of farm and the seasons. The livestock wastewater is hard to treat because it has large amount of organic matters. floating materials. nitrogen and phosophorous that is disposed in the ocean. It will not be allowed to dispose in the ocean from 2012. This is the system developed as 2007 Korea Institute of Environmental Science and Technology project. This technology. Korean livestock wastewater treatment system. can be used for small size of farms. 2. Introduction 3. Characteristics - Easy to operate as Korean livestock wastewater treatment system - Treated water can be released into lakes after treatment - Less operating expense - Biogas can be used heat in a stable - Small amount of sludge can be used for compost 4. Application - Excrement of pigs. cows and human. and food waste |
Technology & Process | |
| 894 | Loose Blower Pump | ILSUNG Co., Ltd. | http://www.ilsungpump.co.kr | 1. Outline • Low-vibration and low-noise loose blower pumps areused in water treatment and pipe cleaning. • It has low vibration and low noise because it uses a helical rotor. 2. Introduction .jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/blower-pump(2).jpg'>3. Characteristics • Low starting torque and excellent efficiency because of the helical rotor effect • Reasonably priced because of its optimum design • Excellent quality • Exported to Japan • Pressure: 1.000–10.000 mmAq • Capacity: 1–300m3/minute 4. Application • Water treatment • Pipe cleaning • Powder conveyance • Incinerators • Food ingredients conveyance |
Equipment | |
| 895 | Low Turbidity 1720E | Low Turbidity 1720E | Yuil Lab Tech Co., Ltd. | http://www.yuillab.com | 1. Outline This low turbidity 1720E can download data from SC100 controller. palm pilot and pocket PC with wireless telecommunication and furthermore download CVS with a laptop PC or data in a XML data format as well. If necessary. it provides easy data management with simple connection at any time. In particular. users can easily check the status of the product without any additional equipment for regular-based maintenance. Please note that an auto-flushing device is optional. 2. Introduction 3. Characteristics - Provide excellent accuracy and repeatability - Enhanced communication - Enhanced data management - Easy to use 4. Application - Analysis of quality of water for purification |
Equipment |
| 896 | Lower Section Delivery Flap Weir | Lower Section Delivery Flap Weir | DAE HAN Industrial Machinery Co. Ltd. | http://www.dhsumoon.com/ | 1. Outline - The lower section delivery flap weir floodgate is designed to keep the floodgate. which exists to control reservoir in rivers. ponds and water channels. sustained on its own without the need for a separate energy source. The Company’s lower section delivery flap weir is designed to open and close automatically as the water pressure rises and falls. When water pressure rises. the floodgate automatically opens so that fish can move back and forth freely in the low section. In addition. multiple safety devices are featured in the floodgate. increasing further convenience. 2. Introduction 3. Characteristics -In closing. the floodgate will remain automatically closed (No power needed). - Even when cylinder pressure declines. the floodgate remains closed. - Durability has increased due to an enclosed cylinder structure. - When being closed. the angle of a flap weir may randomly be adjusted by up to 90 degrees. - The angle of a floodgate can stay self-locking from any angles. - A floodgate is made of steels or semi-permanent FRP and does not allow precipitates. - The floodgate featuring the ability to control a water level in plc control may automatically be adjustable depending on how much water it contains. - It may prevent potential damage caused by flood by keeping the gate open completely. - It enables us to secure a sufficient amount of agricultural. industrial and domestic water in precaution against chronic water shortage. 4. Application - Lower Section Delivery Flap Weir Floodgate |
Equipment |
| 897 | Ltdu-q Type (Four Pillar Lift Type) | Ltdu-q Type (Four Pillar Lift Type) | Jeil Machinery Co. Ltd. | http://www.jim21.co.kr | 1. Outline • It is a high-capacity type of machine. • A sensor detects the changes in the sludge discharge volume and the machine automatically moves the scraper up and down. 2. Introduction 14Biz-17.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-17.JPG'>3. Characters • It protects the machine from overloading during operation. It also maximizes operation stability and machine performance by equipping a post at each of its four points. • It uses a cycloid speed reducer to realize a high stability and reduction ratio. • It has a large and excellent output torque (best for large settling tanks). • It has an excellent durability. with low noise and vibration. • It is simple and easy to operate and maintain. 4. Application • Settling tanks and sludge thickeners for steel manufacturing wastewater treatment plants • Settling tanks and sludge thickeners for paper manufacturing wastewater treatment plants • Sewerage treatment plants. settling tanks and sludge thickeners for wastewater treatment plants • Other large scale storage tanks |
Eco-Friendly Products |
| 898 | LTMD-Q | LTMD-Q | MORGAN KOREA LTD(Enertork Ltd.) | http://www.morgankorea.com | . |
Energy |
| 899 | M&A Process | M&A Process | Samchully Enbio Co. Ltd. | http://www.senbio.co.kr/ | 1. Outline Existing M & A processes have problems such as wide site. complex operation. degradation during winter and high disposal cost. This M&A Process is a high efficient treatment technology that enables sludge to be used as a fertilizer and nitrogen and phosphorus to be treated in a short time without expanding or changing existing facilities by removing nitrogen. phosphorus and organic matters through a struvite crystallization method that uses sea water or brine. 2. Introduction 3. Characteristics - Existing process can be applied to NㆍP pre treatment or post treatment - Organic matters and heavy metals in pollution sources can be disposed at once. - Excellent in treating high concentrated NㆍP in livestock wastewater. excrete and industrial waste water. - Crystallization reaction can be completed within 30 minutes - Good precipitability (specific gravity 1.76) - Establishment or extension by increase in quantity can be minimized - Automatic operation by chemical automatic injection equipment is possible. - Suitable for use in Korea. - Reuse of byproducts is possible. 4. Application - High efficient treatment technology |
Technology & Process |
| 900 | Machine Control Panel | HC 400/ HC 500 | Modern Tec | http://www.moderntec.kr/ | · High-performance Horizontal Machining Center · All axis LM Guideway for higher speed and accuracy · Tool transfer time (T-T-T). under 1.5 seconds. reduces specific cutting time to improve productivity · Automatic pallet changer (APC) provided as a standard feature to improve productivity | Equipment |
| 901 | Macromolecule Automatic Dissolution Device (Auto Jetwet) | Macromolecule Automatic Dissolution Device (Auto Jetwet) | YUCHEON ENVIRO CO., LTD | http://www.yucheon.co.kr/ | 1. Outline This macromolecule automatic dissolution device is an instrument easily operated and maintained. and reduces the cost of chemicals by completely dissolving polymers and facilitates the supply of chemicals in a fixed quantity. 2. Introduction 3. Characteristics - Easy operation and maintenance - Reduce the cost of chemicals by completely dissolving polymers and facilitate the supply of chemicals in a fixed quantity - Minimize an installation area by high-concentration dissolution - Low installation cost and reduction in power cost - Simple operation and low maintenance cost due to a low failure rate 4. Application - Landfill - Water purification plant - Water supply - Sewage treatment plant |
Equipment |
| 902 | WE-MF2000 Series magnetic flow meter | Wooritms Co., Ltd. | http://www.wooritms.co.kr/ | 1. Outline This WE-MF2000 Series magnetic flow meter was developed by using Faraday’s law and Fleming’s law. The meter used the principle that fluid forms a certain magnetic field in a flowing conduit and when the fluid flows. current changes in proportional to flow velocity. The meter has an external output of DC 4~20mA and RS232C and PULSE output. The meter is a super precision flow meter that can be customized according to the field conditions with a self-diagnosis function. 2. Introduction 3. Characteristics - All-in-one type or separable type can be selected according to the field conditions - In case of electroheological fluid. stream gauging is possible regardless of temperature. pressure. viscosity. existence or non existence of solid matters and electric conductivity. - Shorter straight pipe length at the upper and lower sides than other flow meters. - Quick response. - High precision.(general type : 0.5% level. OPTION : 0.2% level) - Low flow velocity measurement is possible. 4. Application - Stream gauging |
Equipment | |
| 903 | Magnetic Science Water Device | Fantaclean | LB Global Co., Ltd. | http://www.lbglobal.co.kr | 1. Outline - This Fantaclean is a special magnetic circuit type empowered by a powerful permanent magnet and is designed to sustain a magnetic circuit. When water passes through the Fantaclean. by its nature water turns atomized by the magnetic field of the device and is translated into hexagonal water which is superior in solvency. penetration depth and detergency. 2. Introduction . Character - Korea’s one and only magnetic field analysis program. being the first of domestic self-treatment water activator. - Easy to install. - Special metals to increase a coercive force. - High magnetic field maintains zero leakage. - Minimum management cost and semi-permanent life 4. Application - Water activator |
Equipment |
| 904 | Mambrane (E-type) | Econity | http://www.econity.com/ | E-Type 1. Features - Operator-friendly design in cartridge. - Energy saving design from end-free style. - High packing density. - Less fouling. - Less frequency of chemical cleaning. 2. Operation Net Flux - Flux 12.3 ~ 15.0 gallon/ft²∙day (0.5 ~ 0.6 m³/m²∙d) 3. Applications - Municipality and industrial wastewater treatment. water treatment. pretreatment to desalination. | Equipment | |
| 905 | Manganese Dioxide Catalyst | Manganese Dioxide Catalyst | PureSphere Co., Ltd. | www.puresphere.co.kr | Purelyst MD-101 catalyst is composed of high porous CuO and γ-MnO2. It destructs ozone and formaldehyde more effectively at room temperature than other catalysts (Au. Pd. Pt. etc.). 1. Catalyst shape - Bulk pellet : 1.5. 3 mm Ø Technical data of PurelystMD-101 - Bulk granule : 4x8. 12x20 mesh - Bulk sphere : 3~5 mm Ø - Coated on cordierite honeycomb : 200. 300 cells/in2 Technical data of Purelyst MD-101H - Coated on Ni foam : 20~40 pores/in Bulk pellet (MD-101) Bulk sphere (MD-101S) Coated on cordiertie honeycomb (MD-101H) Coated on Ni foam (MD-101MF) 2. Catalyst composition and properties - CuO > 23 mol%. γ-MnO2 > 69 mol%. K. Al2O3 - Endurable temperature : < 350 oC - Specific surface area : > 230 m2/g 3. Applications - Ozone (O3) destruction at room temperature : Air cleaner. AOP process. Corona/Plasma unit. Ozone sterilizer. etc. - Carbon monoxide (CO) oxidation for gas mask and fire escape hood - Formaldehyde (HCHO. sick house gas) destruction at room temperature : Air cleaner PureSphere can recommend you catalyst design and its operation condition in detail. Ozone destruction equipments 4. Information - Performance data of Purelyst MD catalysts - PureSphere's product brochure Optional Information - Payment : T/T in Advance - Origin : Korea - Packaging : 15 kg can. 350 L drum. ton bag - Samples : Free - Remarks : Contact : Dr. Jihn-Koo Lee. jklee@puresphere.co.kr. 82-10-2627-1917 | Energy |
| 906 | Manhole Cover For Preventing Rainwater Inflow | Manhole Cover For Preventing Rainwater Inflow | HANYANG ENGINEERING CO LTD | http://www.manhole119.com | <b>Product Description</b> <br><br> Structure: Manhole frame+Safety Ring+Manhole cover <br><br><b>Outline</b> <br> Rainwater inflow into manholes on sidewalks or streets requires pumping water causing awesome noise which gives people lots of troubles every year. So. a study has been carried out to get rid of above troubles. <br><br><br><br><b>Features <br></b><br> 1)Environment <br> -The water does not enter into a manhole(Water pollution and groundwater pollution prevention) <br><br> 2)Safety <br> -Fixing a assist cover (Safety ring) can prevent casualties or car accidents by its upset. leaving. breakdown or abrasion etc <br><br> 3)Waterproof <br> -The rubber pack between the fixed cover ring and the main cover works as a soldering <br> -The rubber pack prevents water inflow and bad smell <br> -Water proof can save cost by saving drainage flow over 20% in rainy season <br> -No water inside manhole can save budget for maintenance and service etc. <br><br> 4)No noise <br> -Even the fixed cover ring (cast) and the main cover are inclining loaded. the mechanical couble closing structure and the rubber pack prevents a distance height and noise | Water Treatment |
| 907 | MBR (Membrane Biological Reactor) | MBR (Membrane Biological Reactor) | G&G InTech Co., Ltd. | http://www.ourgng.co.kr/ | 1. Outline • It is a unit that combines the biological treatment process with the advantages of a separator membrane. • It uses an advanced wastewater treatment technology that does not require additional treatment process after the sludge is separated. • It uses a high-tech separating process that can separate and remove organic matters. inorganic matters. pollutants and microorganisms from raw water or wastewater. It can do the process almost perfectly. depending on the size of the separator membrane micro-pores and the membrane surface charge. 2. Introduction 14Biz-58.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-58.JPG'>3. Character • It is an economical treatment process. • It requires a small installation space. • It provides a stable quality of the treated water. • It is easy to maintain. • It reduces the surplus sludge. • It has a varied application. 4. Application • Sewage treatment • High-concentration organic wastewater treatment • Organic matter. nitrogen and phosphorus treatment • Advanced treatment of industrial wastewater • Pretreatment of water for reuse and recycling |
Eco-Friendly Products |
| 908 | MBR SYSTEM | Submerged Membrane Bio-Reactor System | Ilshin Environmental Engineering Co., Ltd. | http://www.okilshin.co.kr | 1. Outline - By mixing the advantages of activated sludge process and membrane technology. it replaces the solid-liquid separation with membrane separation to solve the disadvantages of conventional activated sludge process. - It applies the submerged membrane (hollow fiber membrane) instead of the settling tank of the conventional biological process. - It discharges the treated water by separation membrane in the aerobic tank. - It separates the solid and liquid by enmeshment (filtration principle). - It discharges only small particle excluding the particle larger than membrane hole. 2. Introduction 3. Characteristics - Economical treatment process - Reduction of construction area - Stable quality of treated water - Easy maintenance - Reduction of surplus sludge - High compatibility 4. Application - Treatment of organic wastewater - Application for the combined septic tank - Area for the strict effluence water quality standard - Area limited the construction site - Excreta and livestock wastewater treatment - Remodeling the conventional sewage/wastewater treatment plant |
Technology & Process |
| 909 | MBR System | MBR System | Seungjin Engineering Co., Ltd | http://sjengin.cafe24.com/ | 1. Outline - MBR System involves a technique to treat wastewater by combining a biological treatment process and a membrane separation technology and is designed to stably and efficiently decompose pollutants in inflowing water by using aerobic microbes and undertake solid-liquid separation by using a submerged flat sheet membrane. 2. Introduction 3. Character 4. Application - Biological treatment. |
Technology & Process |
| 910 | MBR system | Hansu Technical Service | http://www.hansuts.co.kr/ | 1. Outline • The MBR system is a mixed system of biological activated sludge process and physical membrane separation process. • MBR system is the combination of the membrane process. such as microfiltration or ultrafiltration. with a suspended growth bioreactor. • Stable treated water quality can be acquired. It is a physical filtration system through membrane filtration system that filters the turbidity of the substance and bacteriomycota. 2. Introduction 14Biz-424_Membrane_Bioreactor_(MBR)_system.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-424_Membrane_Bioreactor_(MBR)_system.jpg'>3. Characteristics • Lesser site area requirement: No high-load operation using a membrane and advanced treatment facilities are required. • Stable treated water quality can be acquired: It is a physical filtration system through themembrane that filters the turbidity of the substance and bacteriomycota • Easy maintenance • Reduce surplus sludge 4. Applications • Biological activated sludge process • Sewage. water purification. and waste water treatment processes that require physical membrane separation |
Equipment | |
| 911 | MBR(Membrane Bio Reactor) | MBR | Green Environmental Technology Co., Ltd. | http://www.getc.co.kr | 1. Outline - This process mixes the advantages of the process of membrane bio reactor and membrane technology. - Stable treatment is available irrespective of the settling feature of sludge (SS removal is 100%.). - It is effective to reduce the volume of aerobic tank and resolve the organic materials by maintaining the microorganisms concentration of bio reactor. - Compact treatment process is available. - It can remove the bacteria and virus. 2. Introduction 3. Characteristics - Saving the area of installation space : it is not needed the high load operation using separating membrane and advanced treatment facility. - Securing the stable quality of treated water : removing the bacteria and turbidity materials through the physical filtration system by membrane. securing the water quality being used as gray water. - Easy maintenance : it is not needed the human labors for maintenance due to the automation system. - It reduces the emission of sludge. - It is an economic process. 4. Application - Organic materials treatment process : it resolves the organic materials of wastewater by using the aerobic microorganisms and separates the solid and liquid by using the membrane. - Treatment process of organic materials. nitrogen and phosphorous : if the organic materials process can not treat the nitrogen and phosphorous under the emission standard. it removes the nitrogen and phosphorous by adding the biological N/P removal process and then separates the solid and liquid by using the membrane. - Advanced sewage treatment - Advanced industrial wastewater treatment - Highly concentrated organic wastewater treatment - Water reclamation and reusing treatment facility |
Equipment |
| 912 | MBTMBR | MBTMBR | MBT Co., Ltd. | http://www.mbtmbr.com | 1. Outline • MBTMBR is an advanced water treatment system with maximized treatment efficiency. N&P as well as various floating and organic matters can be removed at the same time because it uses a submerged separation membrane. The treatment efficiency is maximized because it uses chlorine dioxide for the fine screen cleaning device. separation membrane cleaning device. treatment water tank disinfection device. and exhaustion fan deodorization device. 2. Introduction 14Biz-43.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-43.jpg'>3. Character • Slime Removal (chlorine dioxide backwashing. which is great in removing biofilm) - It regularly cleans the fine screen net of which pores are often clogged with sediments or organic matters by using automatic backwashing system to prevent blocking of the fine screen opening. - The biofilm. which is formed by microorganisms. is removed efficiently with chlorine dioxide so that the water can be stably treated both in the first (fine screen) and in the second (membrane separation) treatment process. 4. Application • Sewage treatment • Food wastewater treatment • Industrial wastewater treatment • Water reuse treatment • Improvement of existing plants • Various water treatments |
Equipment |
| 913 | 3000 Multi-function process controller | 3000 Multi-function process controller | Yuil Engineering Corp. | http://www.h20is.com | 1. Outline - H2OiS 3000 series are process controllers to monitor continuously pH/ORP. Conductivity. Resistivity with Proportional or ON/OFF function according to the setting values in concentration. 2. Introduction Table 1. Specification |
Instrument & Chemicals |
| 914 | Measurement of indoor air quality | Indoor air quality management in public use facilities | MIRYEUNG Co., Ltd. | http://www.miryeung.com | 1. Outline - Acting as a proxy in measuring indoor air quality. 2. Introduction 3. Application - Measurement of indoor air quality |
Instrument & Chemicals |
| 915 | Measuring device for multi-gas pollutants of sampling type | FWE200 | RITCO (Royal Industrial Tech Corp.) | http://www.ritco.co.kr | 1. Outline - Wet type dust analyzer suitable to the place with much moisture 2. Introduction 3. Characteristics - High reliability and accuracy verified by the various domestic places - Decomposition of high efficiency (Resolution 0.5 mg/m³) - Simple installation and sample-operation 4. Application - Measuring the concentration of dust of the discharged gas from various industrial industries |
Equipment |
| 916 | Membrane | Membrane | GETC Co., Ltd. | http://www.getc.co.kr | 1. Outline - The company’s MIF membranes which are used to the membrane water treatment system are the hollow fiber membranes. - Each of the membranes is a high-tech ultra precision filter to remove particulate materials of water through micro pores on the surface of the membrane. - The membranes are composed with an even pore size. It has chemical stability and a long service life due to being made of PVDF. 2. Introduction 3. Character - Membrane filtration is a separation process to remove suspended materials or colloid when water goes through the membrane by pressure difference. Chemical reaction or deformation is not occurred during the process. - Although pore size of a membrane generally used to pure water treatment is 0.1 ~ 0.3um. pore diameter of a MIF membrane is 0.01 ~ 10um. Colloid. suspended materials. fungus bigger than pore size of a membrane can be removed. 4. Application - Pure water treatment |
Equipment |
| 917 | Membrane | GLOBE. | Pure Envitech Co., Ltd. | http://www.pure-envitech.co.kr | 1. Outline - UF Membrane Filter for home. 2. Introduction 3. Character - Excellent water filtration by a high accumulated radiation technology. - Great chemical and thermal resistance because of a polysulfone membrane. - Minerals. which are good for health pass through the membrane. and harmful suspended materials and bacteria are filtered. - Additional pumps are not needed. Normal house water pressure is enough to supply sufficient water. 4. Application - Hollow fiber membrane for home |
Equipment |
| 918 | Membrane | GLOBE | PURE ENVITECH Co.Ltd. | http://www.pure-envitech.co.kr | 1. Outline - UF Membrane Filter for industrial use. 2. Introduction 3. Character - High Performance ㆍThis is an ultrafilter membrane which has excellent permeability and demarcation because it is emitted with an advanced technology. This is excellent at removing fine grains and microorganisms. In addition. this is excellent at producing pure water and pyrogen removed water. - Low price ㆍPrice is low because an automation and mass production line has been built with 100% Korean made equipment which is funded by the Korean government. - Long life ㆍGood durability during long operation because this has a more durable supporting layer than other products. 4. Application - Water treatment ㆍRO membrane pretreatment process ㆍHeavy water treatment in a building - Electronics industry ㆍFinal Filter for producing ultrapure water ㆍReuse of grinding waste water ㆍPurification of cleaning water for electronic parts - Food ㆍCleanliness of fruit juice and purification of liquefied seasoning - Medicine manufacture. Biotechnology ㆍRemoval of Pyrogen in water for injection and raw materials. manufacturing of sterile water ㆍAnd concentration of bacterial separation in a fermentation process |
Equipment |
| 919 | Membrane (PF) | PF-90M, 70M, and 20M | Econity | http://www.econity.com/ | Pressurized hollow fiber membrane was developed and designed to have a very high packing density and a higher removal efficiency operation. PF-90M. 70M. and 20M 1. Features - Diameter: 10 inches. membrane surface area: 90 ㎡ (969 ft2) - Operation with high removal efficiency 2. Operation Net Flux - Flux 24.6 ~ 36.9 gallon/ft²∙day (1.0 ~ 1.5 m³/m²∙d) 3. Applications - Municipality / industrial wastewater treatment. pretreatment to water treatment. | Equipment |
| 920 | Membrane bio-reactor | CF frame | Econity Co., Ltd. | www.econity.com | 1. Outline - The drawing method mainly uses crystalline polymers (polyolefine. teflon). The method melts polymers at a high temperature and extrudes at a high temperature and produces a precursor with a very high degree of crystallinity and put stress and open the amorphous region. 2. Introduction 3. Characteristics - Simple appearance. - Easy to cleanse and maintain because a cartridge can be detached from and attached to frame. - Shape of an air diffuser is improved and power spent on degree of integration is reduced. - Performance of a membrane bio-reactor is improved by preventing fouling. - Improved stability. - A area for installation can be reduced due to improvement of a degree of integration. - Weight of frame is reduced considerably. 4. Application - Absorption of treated water |
Equipment |
| 921 | Membrane Degasifier | EnTech Co., Ltd. | http://www.ientech.co.kr/ | 1. Outline • It resolves restrictions on the height of a tower through an inconvenient process of removing dissolved oxygen using an existing degasifying tower. • It is an ultrapure water facility (polishing system) for obtaining lower dissolved oxygen. 2. Introduction 14Biz-478_Membrane_Degasifier.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-478_Membrane_Degasifier.jpg'>3. Characteristics • Applies de aeration using a gas separator membrane • Requires a small installation area and can be easily maintained because of its skid shape • Shows an easy response to flow increase • Has a high de aeration efficiency 4. Application • Easy removal of dissolved gas (CO2. O2) in water • Dissolved oxygen of treated water can be treated by a PPB unit • Cleaning water in the electronics industry. such as semi-conductors and LCDs • Removal of dissolved oxygen in treated water. cooling water. and cleaning water of thermal power and nuclear power generation plants • Removal of dissolved oxygen in boiler feed water • Removal of dissolved oxygen in the manufacturing treated water of food. beverages. and medicines |
Energy | |
| 922 | Membrane diffuser | PTFE membrane for pollution prevention | Eco Green Tech Co. Ltd. | http://www.ecotsc.com | 1. Outline This membrane diffuser pollution prevention PTFE membrane is a coating EPDM disk type and a tube type. The fluorinated rubber coated membrane is mainly used in the wastewater treatment plants. 2. Introduction 3. Characteristics - Competitive SOTE - Improvement of maintenance with continuation of initial efficiency and loss of head - Prevention of pollution and accumulation of calcium - Long product lifecycle - Good resistance to chemicals - Good resistance to oil. fat and grease - Good resistance to hydrocarbon. fuels and solvents 4. Application - Wastewater treatment plant |
Equipment |
| 923 | Membrane Filter | Membrane Filter | Daekeum Geowell Co., Ltd. | http://www.geowellwater.com | 1. Outline • Ultrafiltration - Ultra-filtration uses the same membranes as those for reverse osmosis and normally applies a pressure of 1–10 kg/cm2 so that even water. ions. and matters in low molecules could permeate fine pores. - However. matters contained in water are effectively separated according to molecular weight or size in this filter because macromolecules or colloidal matters are removed at the membranes. • Microfilter - It is the most convenient method to filter and remove traces of toxic components that exist in water. which is widely used for gas filtration as well as fluid filtration. including pretreatment for potable or industrial water; crushing and powder filtration after activated carbon filtration; and purification of various pigments. lubricants. paints. enamels. air cleaners. and others. - It is easy to exchange the filter media and to operate the filter. Only a small area is required for installation. and the installation cost is low in wide area applications. 2. Introduction 14Biz-44.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-44.JPG'>3. Character • Induces flow to the opposite direction through a ‘Semipermeable Membrane’. which is especially made by artificially adding high pressure over osmotic pressure to the solution in high concentrations as it is applied using reverse osmosis • Purifies water by removing impurities. such as minerals and salts. as these block off water flow. thus lowering its concentration 4. Application • Main use of a unit using reverse osmosis (R/O) unit • Desalination of seawater or saline water • Ultrapure water for the electronic industry • Pharmaceutical and medical water • Reusable water of drainage with heavy metals. acids. or alkalis • Main uses of a unit using Ultrafiltration(U/F) Membranes • Ultrapure water for the electronic industry • Medicinal water for the chemical and pharmaceutical industry |
Instrument & Chemicals |
| 924 | MEMBRANE FILTER PLATE | MEMBRANE FILTER PLATE | Sinwoo Co., Ltd. | http://www.sin-woo.com | 1. Outline - This Membrane Filter Plate is effective in non-filterable dehydration as the Filter Plate increases a dehydration effect by inflating a filtration membrane using water pressure or air pressure in a filter cake within a chamber formed by the first feeding pump and then forcibly discharges slurry as a second process. 2. Introduction 3. Characteristics - Low moisture content of a cake (30%-60%). - Doubling the amount of treatment through the reduction of dehydration time (more than 50% compared to existing filter plates). - Saving transport cost and treatment cost of a cake (30%-40%). - Increased pressing efficiency through simultaneous pressing of both sides. - Increased work efficiency as the separation of a cake is convenient. - Weight lightening of the machine by using a PP plate. - Long lifespan of a Diaphragm. 4. Application - Filter |
Equipment |
| 925 | Membrane filtration device | CMF-S | ANT Co., Ltd. | http://www.antcorp.kr | 1. Outline - An effective facility that can remove pathogenic bacteria such as SS. seaweeds and bacteria. giardia. and cryptosporidium using submerged hollow fiber membrane. and is a new technology that provides a more convenient operation by simplifying existing water treatment process into one. 2. Introduction 3. Characteristics - Large quantity processing in small site is possible - Removal of giardia and cryptosporidium. clean and stable water quality - Maintenance/management is easy since condensation/precipitation/sand filtering is integrated into one process - Reforming existing facility is possible 4. Application - Water treatment filtering facility |
Equipment |
| 926 | Membrane for water treatment | Ceramic membrane | Ceracomb Co., Ltd. | http://www.ceracomb.com | 1. Outline Ceramic membrane is an allitic composite separation membrane. which has an excellent chemical resistance and can be used at a high pressure. UF of 0.02㎛ and MF of 0.1. 0.5. and 1.0㎛ are manufactured and supplied. and there are a tube type and a multi channel type. 2. Introduction(See fig. 1) <Fig 1. Principle of Ceramic Membrane> 3. Characteristics (1) Excellent heat resistance. corrosion resistance. and durability (2) Easy back washing due to low pressure loss (3) High filtering level. and non-maintenance (4) Stable filtering level guarantee 4. Application (1) Dairy. marine. and stock raising processing: Manufacture of high-level protein milk and cheese according to milk concentration (2) Food processing: turbidity removal of liquid type beverage. tangerine. apple. and vaccine liquid concentration (3) Chemical industry: floating oil fine particles. water-soluble oil (4) Iron. and machine industry: Drainage process of lubricating oil. rolling oil. and cutting oil | Equipment |
| 927 | Membrane PTFE | Membrane PTFE | Technofill Co., Ltd. | http://www.csfilter.net | 1. Outline - Membrane PTFE. 2. Introduction 3. Character - High chemical stability. - High flux capacity. - Can be manufactured in various forms. - Produced by bending PTFE material. effective for precise filtering. - Assembled with heat sealing. high safety. 4. Application - Washing agent. solvent. - Mass chemicals production filtering. - Photo sensitizer. - RO and DI system. - Fermentation process. |
Equipment |
| 928 | metalfiber | metalfiber | FiberTech | http://www.metalfiber.com/e_tech_patent.html | Metal Fibers are very thin metal filaments produced by highly advanced technology. Metal Fiber which producedby Fiber Tech Company is very thin metal rod(diameter of this rod is 20~50. human hair diameter is about 80). Fiber Tech have produced the metal fiber under high vacuum condition so that surface of this fiber is very clean. and maintain the uniformity on composition. Metal fibers produced by Fiber Tech have many advantages. - All kinds of metal fibers available. - Purity of material. - Stable and uniform chemical composition. - Improved mechanical properties. - Exclusive structual uniformity. - High output with low production costs. Certifications |
Technology & Process |
| 929 | Ax1-52 | AX1-52 | Cheon-Sei Ind.Co., Ltd. | http://cheonsei.co.kr/Web/Eng | 1.Feature - Durable driving unit The frame of engineering plastic material and planetary gears are precision diacasted with anti-abrasive robust materials for semi-permanent life. - Overload proof motor The internal temperature switch protects motor from overload. - Precise valve construction Check valve are precise dimensions and construction with double check. spring insert type. - Gas locking prevention Liquid end design to minimize dead space. Air relied valve can be provided for vaporous liquid (Optional item for KS 51~32) - Easy dial setting The capacity can be easily adjusted by dial and locked by stop bolt without disturbing pump operation. - Various accessories available The various accessories of good performance are provide for convenient applications. - Anti-siphon check valve - Foot valve with strainer - Flange connections. tees. elbows 2. Application Applications include injection of compounds. chlorine disinfectants an food additive in the scientific water treatment and waste-water treatment fields 3. Certifications -ISO9001 Certificate of Approval -Domestic New Technology (KT) Certificate of Approval | Equipment |
| 930 | HANT | HANT | The Korea Express | http://www.smas.co.kr/english | # HANT HANT is the method which can remove organism and SS. N. P in sewage & wastewater by the combination of organism removal technique of The Korea Express and N. P removal technique of HDEC. It is the highest treatment technique of biological N & P removal that is made up of response tank composed with Anoxic tank/anaerobic/aerobic/ and submerged type Hollow Fiber Membrane in aerobic tank. It is a high tech advanced technology that approves stable and excellent treated water quality by segregating sludge from treated water through vacuum Filtration Method. # Technical Treatment Principle In a series of response tank composed of Anoxic tank/anaerobic/aerobic tank/exhaust tank. pollutants are treated through the reaction like the followings in each response tank. # Pretreatment By blocking inflow of impurities in Mesh Screen sewage. prevention of bulking and lengthening of life span of membrane # Characteristics and Merits of HANT 1.Technical effect -To be compared with other processes. the removal effect of N. P is excellent. -outer C source is saved in law C/N ratio. -Flow speed of membrane transmission can be kept stably through Outer Skin Membrane -Random control to the stay period of sludge (SRT > 30days) is possible -can prevent membrane pollution through continuous air wash and intermittent vacuum operation -Non-necessity of sterilization process (removal of colon bacillus) to the final letting out water and etc. 2.Economic Effects -can lengthen the life span of membrane through continuous air wash and intermittent vacuum operation -can minimize the required land -can save the operation costs -When this is compared with Recirculated MBR process. this is simpler. 3.Merits of HANT -Excellent treatment efficiency and stable treated water quality through Security of high concentration microorganism (strong to shock load. Security of stable treated water quality in winter season.MLSS : 5.000∼12.000㎎/ℓ) -Automatic operation -Security of high concentration nitrification and denitrified macroorganisms -Keeping proper membrane transmission speed -Perfect removal of colon bacillus -High endurance ability of membrane -Reduction of occurrence of sludge (As SRT over 50 days. Yobs = 0.21 below. 20∼40% of A2/O) -Economical operation and maintenance expenses -Non-necessity of sterilization process (removal of colon bacillus is possible without particular sterilization facilities) -Non-necessity of first sedimentation facility. final sedimentation facility. private filtration facility (reduction of required land 60∼70% of A2/O) and etc. |
Technology & Process |
| 931 | MHC-200 Centrifuge Controller | MCH-200 | Muhan Technical Co., Ltd. | www.muhandae.co.kr | MHC-200 Centrifuge Controller is designed to easily monitor the running conditions. to perform operation and maintenance work conveninently. keep speed control system in reliable and safe conditions. and to minimize mechanical trouble when discharging the solid with less moisture ro continuously running without operator. The principle of speed control by the exclusive controller for centrifuges it to provide speed motor inverter with speed instruction by processing the date of loads from the speed motor. according to the change in solid amount fed to the centrifuge during operation. and to continuously control the speed to be best-suited for the solid concentration by comparatively processing the data. including the load change and difference between instructed speed and detected value. after the detection of speed. In addition. our speed control system is designed to regenerate the breaking energy resulting from the speed motoro in order to reduce power consumption. | Equipment |
| 932 | Micro Discfilter | Micro Discfilter | YUCHEON ENVIRO CO., LTD | http://www.yucheon.co.kr/ | 1. Outline Micro Discfilter is a highly-efficient tertiary treatment facility of sewage and wastewater using fine filtration membrane. It can remove BOD. SS and T-P efficiently and removes non-point pollution sources (CSO). 2. Introduction 3. Characteristics - Can install up to 30 discs - Maximum treatment capacity is 60000m3/day - Can treat large amount of water in a small area - Reduce installation and operation cost 4. Application - Tertiary treatment of BOD. SS and T-P in discharged sewage water for total maximum daily load and TMS - Tertiary treatment for the removal of SS in sewage. wastewater. and reclaimed wastewater and reusing system - Removal of algae and SS in raw water (purification plant). lakes. and fish farms - Pre-treatment for the advanced treatment (activated carbon. ion tower. ozone. UV) and membrane separation (R/O. N/F) - Treatment of nonpoint pollution sources (CSO) (combined sewer overflows when raining) - Treatment of T-P by combined process with chemical injection equipment at the back of the bio-reaction tank |
Equipment |
| 933 | Micro Drum filter | MDF filter | Asia Pacific Water Technology Inc. | http://www.apwtech.co.kr | 1. Outline - This equipment is a natural gravity type filtering equipment. The inflow water is flowed in the inside of filter drum and passes through the micro drum membrane. During this process. the pollutants is filtered and discharged and the filtered SS is conveyed to the bottom of circulating filter and discharged. It is operated stably and secures the high treatment efficiency because the filtering device is operated continuously during the membrane-washing time. 2. Introduction 3. Characteristics - Filtering treatment efficiency is very high and the quality of discharged water is excellent because it is gravity filtering type. - The maintenance cost is economic because it consumes small amount of power compared to the other filtering device. - It is available to install the filtering equipment (MDF) adequate to the actual condition (it is available to supply various types such as water way structure and pipe type ground installation structure). - It is flexible and effective because it can exchange the micro membrane in line with the inflow water condition. - The maintenance is very convenient and the durability is strong. 4. Application - Removal of SS of discharged sewage - Advanced sewage treatment and reuse - Removal of SS for household wastewater - Filtering treatment of cooling water and circulating water - Removal of SS of water works sources |
Equipment |
| 934 | Micro Drumfilter | Micro Drumfilter | YUCHEON ENVIRO CO., LTD | http://www.yucheon.co.kr/ | 1. Outline Micro Drumfilter is a tertiary treatment facility for municipal sewer and small wastewater treatment facilities. It is a highly economical and innovative facility which performs highly-efficient filtration using a fine filtration membrane. 2. Introduction 3. Characteristics - Easy operation with innovative design and a minimum number of parts; low maintenance cost - Highly economical and reasonable design by providing the most suitable model according to a treatment capacity or quality which meet the needs of customers - Highly efficient and stable treatment of various pollution sources (SS. BOD. etc.). treatment capacity is not changed even when it is operated for a long term - Need a small installation site thanks to its compact design 4. Application - Tertiary treatment for municipal sewer and small wastewater treatment facilities - Removal of algae and SS in raw water (purification plant). lakes. and fish farms - Treatment of industrial water. cooling water. agricultural water. etc. - Treatment of nonpoint pollution sources (CSO) (combined sewer overflows when raining) |
Equipment |
| 935 | Micro filter | LDF | ANT Co., Ltd. | http://www.antcorp.kr | 1. Outline - Lily Drum Filter’s strength is that it can apply filtration films of various sizes (10 - 300㎛) using natural filtering method based on hydraulic flow between interior and exterior of drum filter. and has excellent filtering ability of approximately 5ppm on treated water SS standard. and material of filtration film is SUS 316L. which guarantees semi permanent life cycle 2. Introduction 3. Characteristics - Semi globe type filtering area is innovatively increased using hexagonal center drum - Uses small cleansing water (1 - 3% of inflow water) based on cross arrayed backwash nozzle - Life cycle can be extended using stainless material filter (semi permanent life cycle) - Maintenance/management is convenient by applying separable unit filtration film - 24 hour continuous operation possible - Various sizes of filtration film can be replaced (10 - 300㎛) - High SS processing efficiency (below 5ppm) 4. Application - Filtering water treatment in waste water/sewage plant |
Equipment |
| 936 | Micro Filter | Micro Filter | Hanssem Co., Ltd. | http://www.e-hanssem.net | 1. Outline - It is used for removing suspended solids and turbidity dissolved in the water. - It also has a function to remove the minute particle crashed by the backwashing process as installing at the back of water purification device. - It is installed to supply the clean water by filtering suspended solids of 5 - 10㎛ and rust produced by the conveying pipe. 2. Introduction 3. Characteristics - No emission of fiber - Filtration by the proper structure of fiber - Accurate micron - Showing the most in-depth capacity 4. Application - Pre-treatment of R/O facility - Boiler and industrial water - Drinking water and medicine - Acid-alkali solution of plating solution - Washing water of cutting - Water purification facility |
Equipment |
| 937 | Micro Wave Liquid Sensor | KFD-Series | Wess Global, Inc | http://wessglobal.com | 1. Outline KFD series senses liquids by using 24GHZ microwaves in a DOPPLER way which are erupted and returned after reflecting back from the surfaces of minute substances that exist in a pipeline. KFD series senses the width of a microwave frequency in the incoming and outgoing sensors. amplify and convert and then output signals. In addition. KFD series is able to measure not only a very small amount of oil but also movements of various kinds of grains and minute powders that have been regarded as very difficult to measure and that are on a conveyer line or are under drop in a stable manner. 2. Feature - High sensibility : Able to measurable even the minute movements of power. -Penetration : Able to measure by making a 24GHZ sensor penetrated through the intermediate obstacles like glasses or synthetic resins. - Contamination : Less contamination on the surface of a senor by using 24GHZ frequencies ( frequency substitute) - Broad measurement range : Measureable by adjusting the sensibility of a sensor. regardless of a flux. 3. Introduction 4. Application - Liquid measurement |
Technology & Process |
| 938 | Micro-Bar Screen | Micro-Bar Screen | BLUE WHALE SCREEN CO., LTD. | http://www.bluewhale.co.kr/ | Superline Screening is a high-tech engineering of 10times complicated than the coarseo r fine screening in which any mechanical trouble should not occur while the 1~5mm of screen openings are kept un-clogged even in the tough circumstance of sewage treatment plants that all kinds of refuses are flowing in. However. around 10 kinds of Superline Screen like Auto-Bar type. Step type. Drum Strainer with Screw type and the Front Face Drivingo r Side Face Driving Belt ytype Screens have been introduced recently as the need of the field is so high. But. it is common that we see some screens have to be cleaned manually by operators periodicallyo r some are bypassing the sewage through the side of the screen frameso r through beneath the screen secretly due to the clogging og the openings which is incurred due to lots of reasons within only 1~10 weeks after start up even they are equipped with some kinds of cleaning apparatus. - Durable Stainless Steel Wedge section Bars(Micro-Bars) are fixed with a special top spacer and the free support structure(Not welded) allows deep and complets slitting of the screen openings by the long teeth rakes. This enables the Never get clogged capability of the openings! - Hinge Cushioned Rake Apparatus provides instant and repeatable protection of whole mechanical parts unlike the normal motor torque limiter that should be reset whenever operated. - Self-Tensioning Apparatus of the Rake Chain makes the static tension of chain set at 0(Zero) unlike the normal tensioning. This unique apparatus prevents the high tension drive of the chain and the mechanical impact of the chain is maintained at less than 1/5 of the normal. hence the life time of the chain is extended to 3~5 times of the normal tensioning method. - UHMW (Ultra High Molecular Weight) Poly Ethylene(molecular weight of 3~6Million). which has 10~20 times of molecular weight of Normal Poly Ethylene (molecular weight of 0.1~0.4 Million) is adapted as the Guide Rails for the Rake Traveling Chains. This enables the lifetime of the Rake Chain to be over 10 years by reducing the coefiicient of friction with the chain rollers to less than 1/7 of the friction with the normal stainless guide rails. | Equipment |
| 939 | Nitcell-A | Nitcell-A | Taelim Engineering Co., Ltd | http://www.taeri.co.kr | 1. Outline - This is the first microbe medication to reduce nitrate nitrogen and nitrite nitrogen to nitrogen or nitrous oxide under the aerobic or oxygen-free conditions through nitrate respiration. developed by the company for the first time in the country. 2. Introduction 3. Character - Posing no risk to the ecosystem in that it consists of wild soil microbes. - Consisting of microbes easily adaptable to polluted/waste water and industrial water. - Consisting of live bacteria cells and spores. - Using seeding of wastewater treatment plants containing plenty of nitrogen. - Facilitating denitritation under the aerobic and oxygen-free conditions. - Optimized proliferation speed. -Stimulating organic/inorganic matters in waste water. 4. Application - Aerobic tank - Oxygen-free tank |
Equipment |
| 940 | Microbe Contact Agent | Microbe Contact Agent | CI Biotech Co., Ltd | http://www.cibio.com | 1. Outline - The microbe contact agent is developed for advanced treatment by utilizing the patent (Patent No. 0338633. a manufacturing method involving variant microbes and nitrogen treatment contact agent) and the utility patent (Registration No. 0229229. Housing of microbe contact agents for sewage. waste and polluted water treatment). It is applicable to a variety of sewage types and is efficiently used for high content of organic matters. an ammonia load treatment facility. By applying variant microbes after quantitative analysis of waste water in a different way. it produce CIMEN-DOC I. II. III and Ultra based on waste water type through coating. 2. Introduction 3. Character - High floating matters and nitrogen removal efficiency - Specially fermented nitrogen variant microbes - Swift reproduction of variant microbes - Varying adaptability of variant microbes - Usability and diversity of installation and application - Effective decomposition of microbes 4. Application - Polluted water treatment plant - Sewage treatment plant - Purifier - Waste water treatment plant - Golf course |
Instrument & Chemicals |
| 941 | Microbial suspension contact insecticide | H.B.C | Hanilest Ltd. | http://www.hanilest.com | 1. Outline - In air is supplied from the side of aeration tank. oxygen dissolute and stirring of polluted water due to levitation force of bubbles occurs - Organic pollutants are removes by repetitive contact of microbial group and pollutants inside water. Due to anaerobic bacteria breeding inside the ring. extra sludge is discomposed and is released into the atmosphere 2. Introduction 3. Characteristics - Reduction of installation cost and installation area - Almost none of extra sludge generation - Facility management is convenient and maintenance cost is reduced - Remodeling of original facility is convenient 4. Application - Removal of water pollutant material |
Instrument & Chemicals |
| 942 | Micro-bubble generator | Super-Aerator | Enet Co., Ltd. | http://www.enetcom.co.kr | 1.Outline Super-Aerator makes gas like air. oxygen. or ozone fine as micro-bubbles at a low pressure by effective gas and liquid contact. thereby rendering the staying time of gas extended and improving oxygen transmission speed and the concentration of dissolved oxygen in an aeration tank or a fish farm. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000279-2.jpg></center> 3. Characteristics 1) Sizes of bubbles are substantially fine such that the surface areas of micro-bubbles contacting with the liquid are increased and the staying time is extended to thereby obtain high gas transmission efficiency. 2) Sizes of bubbles are smaller than existing air diffusers to thereby excellent oxygen transmission efficiency. 3) The micro-bubbles are produced only by the pressure adjustment of the system. without any other manipulation. 4) Lower installation and maintenance costs when compared with other processes 5) Simple configuration exhibiting stable performance in spite of long operating time 6) Wide range of application 4. Application 1) Improvement of DO and treatment efficiency of wastewater treatment tank 2) Improvement of DO in the biological process 3) Ozone contact tank 4) Fish farms and fishing places | Instrument & Chemicals |
| 943 | AMG(Attachable Micro-bubble Generator) | AMG(Attachable Micro-bubble Generator) | NGsT CO., LTD. | http://www.ngst.co.kr | 1. Outline AMG (Attachable Micro-Bubble Generator) is a device to generate micro-bubbles. AMG is attachable and removable so when it is installed on a general circular booster pump. micro-bubbles are generated when the circular pump works. Pollutants in a flotation tank can be treated within a short time by the micro-bubbles. 2. Introduction The fluid that is pressurized through a general gear pump (with less than 4 hpa) makes a lot of bubbles when a spring type automatic switch installed in the AMG is opened. The micro-bubbles and the pollutants meet. which get floated fast and then. treated. The spring type automatic switch has a spring on its top so it has the same or the smaller modulus of elasticity than the inflowing pressure. Through automatic switching. decompression is made. which makes a lot of micro-bubbles. 3. Characteristics Simple device Economical price Easy maintenance 4. Application 1) Tap water treatment - Substitution of coagulating sedimentation in the time of water treatment. - Insan Lake park. Chamsil Seokchon Lake. Pond of Green. 2) Sewage treatment - Treatment of various kinds of waste water - Separation of sewage sludge floatation. 3) Applicable technology - Ozone treatment and sterilization technology. AOP(Advanced Oxidation Process) treatment technology. |
Equipment |
| 944 | Micronix EDI Mix Modules | GHT Korea Co., Ltd. | http://www.ghtkorea.com | 1. Outline • It works as a filter and improves the water quality of inlet water because of pH stabilization by removing carbon dioxide contained in water. • It is an eco-friendly product that reduces maintenance costs by applying a degassing membrane that extends the life cycle of the module to the system and produces stable water quality with high efficiency for a long time. • It prevents burning or damages of the module beforehand through a safety device design with several steps to improve the safety and durability of the system. 2. Introduction 14Biz-162.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-162.JPG'>3. Characteristics • Determines the inlet water quality and starts the manufacturing process • An all-in-one device: starts manufacturing by connecting as in/out pipes and main power • A rectifier that guarantees the best stability • Maintains stable water quality and maximizes the life cycle of the module by applying a deaeration membrane • Eliminates system damage through a phased safety device design • Installation in small spaces • ISO 9001 certification 4. Application • Application to water quality purification facilities |
Technology & Process | |
| 945 | Microorganism agent | General inoculum agent for sewage/wastewater purification | Korea Biotech Research Laboratory | http://www.koreabiotech.co.kr | 1. Outline This product is high-active microorganism agent of excellent sewage/wastewater purification ability. and has sporiferous bacteria. which are cultivated in pure liquid using bionics technology and concentrated in a high density. Therefore. this product rapidly improves treatment efficiency during seeding in a processing plant. occurrence of problems. or repair and maintenance. Meanwhile. for users’ convenience. there are powder type products and liquid type products. and all types can be maintained in activity of inoculum for a long time as they are. 2. Introduction(See table 1) 3. Characteristics - Excellent resolution performance of organism: It is a product by bionics technology. and has a good BOD and COD removal capability. - Various products by used places: Various products according to characteristics of wastewater by types of industry or by used places - Special compound ingredients: Ingredients for facilitating activity of microorganisms and sediment by flock formation - Safety of inoculum: Maintenance in safety of inoculum more than two years. and Harmlessness to human being and livestock - Inoculum of high density: High-density product including microorganisms of a thousand million or more per 1g - Convenience in use: Manufacture in a liquid type and a powder type for users’ convenience 4. Application - Sewage and wastewater processing plants/ factories and livestock wastewater processing plants/ excretion processing plants - Septic tanks/ aeration tanks in butcher houses. restaurants. schools. hospitals. or hotels | Energy |
| 946 | Microorganism agent | Highly active microorganism processing agent GREEN - B | Daeyang Bio Tech Co., Ltd. | http://www.biotech21.co.kr | 1. Outline Our company has provided main companies in Korea for about 10 years with Super-7 for difficult-resolvable and high-density wastewater treatment. Ch-3 for paper and wastewater treatment. and Daeyang P-7 for sewage and wastewater management. which have been developed by national environment research institute with the support of national special research and development costs in an environmental field. Recently. the spearhead application microorganism technology has been introduced. and this product is a product manufactured in such a manner that Pseudomonas sp E1 and E2. which directly secrete organism aggregating agent. and multifunctional strains of 12 kinds. which can resolve aromatic hydrocarbon. PVA. LAS. pigment. detergent. and so on. were separated and cultivated through long-term joint studies of research workers of our company and the national research institute. This product gives an excellent effect when being injected to a processing plant. which has an excessive foaming problem or a COD problem. in case of an initial seeding for difficult-resolvable and high-density wastewater and sewage treatment and of lack of aggregation force of flock. 2. Introduction(See table 1. 2) 3. Characteristics 1) Maintenance of high-density microorganism activity 2) Stability of activated sludge by cultivated strains capable of forming flock by themselves 3) Rapidity of treatment efficiency in an industrial wastewater and sewage treatment plant as this product includes microorganism groups making starch resolving enzyme. protein resolving enzyme. fat resolving enzyme. cellulose resolving enzyme. and various hydrolases 4) Improvement of treatment efficiency by resolution of toxic compound and increase of difficult-resolvable compound. reduction of sludge generation. and removal of odor. 4. Application 1) Initial seeding of a sewage and wastewater treatment plants 2) Increase of removal efficiency of organisms in an aeration tanks 3) Bad sink-ability or lots of pin flocks | Operating Agents |
| 947 | Microorganism Biodegradation | PRO-ACE: Microorganism Biodegradation for removing oils and fats pollutants | Yuil Environmental Development Co., Ltd. | http://www.yuil21.co.kr | 1.Outline PRO-ACE is a microorganism biodegradation that removes the pollutants of oils and fats. thereby solving the problems such as generation of scum. blocking of outlet pipe paths. and generation of foul smells that may occur due to the use of oils and fats. 2. Introduction (See table 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000217-2.jpg></center> 3. Characteristics 1) Smooth pipe flow - No blocking of trap and drainage system and no accumulation of grease by the formation of biofilm 2) Removal of foul smell - Containing microorganism removing foul smell and suppressing growth of putrefactive bacteria 3) Replacement of existing noxious cleaning - No danger of fire or damage and safe use and keeping - No corrosion. giving no influence to pipes. sewage and wastewater treatment plants. and manhole 4) Safe to environment - Made of microorganisms and natural compounds being biodegradable - Inexistence of noxious material and safe in case of throwing the product to drainage 5) High concentration 6) Resistance - High resistance to Sodium Hypochlorite Solution. chlorination. sterilizing germicide. detergent. hot or cool water 7) Rapid effect - Retention more than a billion of high activity microorganisms per 1g - Generation of a great number of oil/organic dissolving components - Fast permeation of natural compounds into grease 4. Application Business places where oils and fats are used. such like fast food stores. restaurants. fried food stores. etc. | Instrument & Chemicals |
| 948 | Microorganism carrier-purpose PU form | Microorganism carrier-purpose PU form | TNL corp. | http://www.tnl.co.kr | 1. Outline Microorganism carrier-purpose PU foam is polyurethane based fabric and is microorganism container enabling growth of high-density microorganism. 2. Introduction Method of using wastewater treatment using microorganism carrier-purpose PU form (see Fig. 1) |
Instrument & Chemicals |
| 949 | Microorganism contactor | BC (Bio-Contactor) Plus for sewage and wastewater treatment | Yuil Environmental Development Co., Ltd. | http://www.yuil21.co.kr | 1.Outline BC Plus maximizes surface area and the number of microorganisms retaining by use of nylon yarn BCF. thereby enhancing sewerage and wastewater purification efficiency. Also. the BC PULS minimizes the drooping of the original shape due to the microorganism attached thereon and the anaerobic process by use of nylon mono-yarn. thereby drastically suppressing the generation of sludge caused by the decomposition and desorption. 2. Introduction - Specification of BC Plus 1) Type: Rope type fixed bad contactor 2) Material: Loop - 900 denior 42 twisted yarn nylon BCF multifilament/600 denior 4 twisted yarn nylon mono yarn. Inner center – 4 mm polypropylene rope yarn 3) Diameter and surface area: Diameter; 40 ~ 45 mm. Surface area; over 1.0 ㎡/m - Use Life: Semi-permanent 3. Characteristics 1) Made of nylon having an excellent biological contacting performance when compared to other materials 2) Most desirable surface area in the current products. exhibiting a great holding amount of MLSS (mixed liquor suspended solids) that results in the excellence in a quality of treated water. and being strong against shock load 3) Good initial biological contacting performance and short time for normalization by use of BCF yarn of Y section 4) No drooping and breakage with less resistance to the air and liquid flows 4. Application Sewage and wastewater treatment using microorganism | Instrument & Chemicals |
| 950 | Microorganism for Wastewater Treatment | Microorganism for Wastewater Treatment | Taerim Industry Co., Ltd | http://www.taeri.co.kr | 1. Outline • A powder-type and a liquid-type are being produced. Use the power-type in seeding and use the liquid-type for maintenance by administering a little of it into an aeration tank. • Because the powder-type is. in particular. effective in microorganism activity and floc formation. it is effective in solid-liquid separation. and it is used in many wastewater treatment plants and septic tanks to remove organic matter and form flock. 2. Introduction   3. Character • Environmentally safe • Comprises more than 10 species of microorganisms. such as bacillus. pseudomonas. aerobacter genus. etc. • Type and composition of microorganisms are chosen for properties. makeup. or conditions of wastewater. Because various enzymes. such as protease. amylase. urease. phosphatase. and others are contained. it is very efficient in proliferating microorganisms. • Preserves viable microorganisms and spores that were contributory to aging and proliferation over a long period and can be applied to a wide range of pH (optimal pH: 6.5–7.5) 4. Application • Wastewater treatment • Removal of organic matters in a septic tank • Floc formation | Eco-Friendly Products |
| 951 | Micro-Organism Fuel Cell BOD Measuring Instrument | HABS-2000 | KORBI Co., Ltd. | http://www.korbi.com | 1. Outline - This instrument measures the sample’s BOD concentration by utilizing the principle where the amount of electricity that is generated. when the organic matter within the wastewater is injected into the instrument and is oxidized by the electrochemical activating micro-organism. is proportionate to the organic matter concentration. 2. Introduction 3. Characteristics - Uses non-medium micro-organism fuel cell sensor - Built-in processing device. resulting in drastic decrease of breakdowns - Accurate value (error range<± 5%) - No need to clean/replace electrode (convenient operation. economical) - Capable of 24H unmanned remote surveillance and A/S 4. Application - Application of BOD total amount meter. resulting from the enforcement of the Total Pollution Limitation Policy for the 4 Great Rivers basins and Gwangju area (3.000 areas) - Unmanned water quality monitoring system for village sewage treatment center (6.000 areas) - Construction of unmanned national water quality monitoring system - Monitoring of water quality of discharge tanks from final sewage treatment centers and wastewater discharge enterprises - Process management system for final sewage treatment centers - Sewage leakage monitoring system - Application as lab instrument in accordance to the revision of the Process Test - Application of treatment expense system for privatized final sewage treatment centers (600 areas) |
Equipment |
| 952 | Microorganisms for nitrogen treatment | Microorganisms for nitrogen treatment | Taerim Industry Co., Ltd | http://www.taeri.co.kr | 1. Outline  Nitcell-A • Nitcell-A. which is a microorganism that we develop and manufacture for the first time in Korea. comprises microorganisms that can revert nitrite nitrogen and nitrate nitrogen to nitrogen gas through nitrate respiration under anaerobic conditions • Nitcell-A is a microorganism that is applied to a2o4 system that we develop to treat nitrogen and other elements that are massively contained in livestock wastewater and industrial wastewater through biological methods. It performs denitrification under anaerobic conditions  Nitcell-O • Nitcell-O. which is a nitrification microorganism that we develop and manufacture for the first time in Korea. comprises microorganisms by which ammoniac nitrogen is oxidized into nitrous acid and nitric acid under aerobic conditions • Because nitrosomonas genus. which is involved in the nitrozation is 10 times slower in proliferation compared with general organic matter decomposition microorganism. a stable nitrogen treatment may become possible in case that cultured microorganisms with high density are externally injected. • Nitrocell-O is a cultured and concentrated microorganism with high concentration. which may treat nitrogen and other elements that are massively contained in industrial wastewater through biological methods.   2. Introduction 3. Character • Environmentally safe • Comprises microorganisms that are remarkable for their adaptability to wastewater and industrial wastewater • Comprises viable microorganisms and spores 4. Application • Denitrification • Advanced treatment | Eco-Friendly Products |
| 953 | Microwave System | Duk Young Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Outline Microwave means the electronic wave ranges from 1mm - 1m. The wave is short and is similar to the light and has a strong fungicidal activity. 2. Introduction 3. Characteristics - Microwave shortens the treatment period. Accessory Conduction materials are heated in microwave without inertia. It is heated by polarization of molecule and microwave is proper for heating materials have low heat conductivity and large volume. The frequency of microwave is from 300MH to 100GHz. the most common frequency for industries and homes is 2.45GHz. Also. it can heat the materials with microwave that it doesn’t need an oven. It has a better effect on manufacturing and treating materials. Treating can be controlled very fast. because there is no thermal time constant. 4. Application ㆍDry ceramic products ㆍDry casting mould ㆍDry pharmaceutical products ㆍDry woods ㆍDry bricks ㆍPasteurization food ㆍFoam rubber products ㆍRemove grease in powder ㆍSintering ceramic products ㆍPlasma cleaning and coating ㆍResin heating ㆍHeat general modification ㆍHeat liquid chemical ㆍPlastic handling ㆍProduce instant rice (Patent No. 10-0726155) |
Technology & Process | |
| 954 | Mid and Large-Sized Wind Power Generator | Mid and Large-Sized Wind Power Generator | HI Energy Korea Co., Ltd | http://www.hi-energy.co.kr | 1. Outline - When the wind power generator on the most frontal side moves in a clockwise way. the two power generators after it move in the opposite way. The three generators after the two move clockwise. This alignment leads to equal power generation and a smaller area encompassing the facility. 2. Introduction 3. Character -Upgraded constraint on installation side caused by generation noise. -Massive initial investment cost and stipulated space among the generators. - Permission for a large-sized wind power generator to be gained when average wind speed per year reaches more than 7m/s. 4. Application - Wind power turbine |
Equipment |
| 955 | MINERAL WATER SYSTEM | Hyundai Wacor Tec. Co., Ltd. | Product Concept & Strong Sales Point Our Mineral water system produces high quality purified drinking water by removing bacterium. chlorine. bacillus. peculiar smell. etc with high-tech material acf as purgative medium. THE STRONG POINT * Double construction of the upper & lower percolated core makes sterilization more drastically by removing the heavy metal such as plumbum. However it reserves beneficial mineral and microelement. * Built in-self-control valve to control level prevents any saturation or leaking * Removes the residual chlorine of tap water effectively and restrain from various kinda bacteria * Easy filter replacement and simple installation | Energy | ||
| 956 | MIN-trol for Separate Water | MIN-trol for Separate Water | FLOWTECH Co., Ltd. | http://www.flowtech21.co.kr | 1. Outline - Compact separate water hammer cushion that can be easily installed on a water tap and a valve front where water hammer and water shock occur. 2. Introduction - MODEL No.: M500 - Outside Dimension: ￠87mm×115mm - Total Capacity: 160cc (ml) - Maximum Working Pressure: 10㎏/㎠G - Maximum Shock Pressure: 14㎏/㎠G - Maximum Working Temperature: 93℃ - Maximum Velocity: 3m/sec - Air Filling Pressure: 1.5㎏/㎠G when released from factory 3. Character - Non – Metallic internals. - Sealed Air Charge. - Easy Installation. - Feed Water Valve ㆍ Condition in which water flows normally when the valve is open. ㆍ When the valve is rapidly closed. shock (water hammer) occurs which in turn generates high pressure suddenly and then air separated and sealed by a diaphragm is compressed and absorbs shock energy in order to prevent shock. 4. Application - Water hammer cushion. |
Technology & Process |
| 957 | Minute Bubble Generator (MB chamber) | Minute Bubble Generator (MB chamber) | Energy & Environment Technology Co., Ltd. | http://www.enetcom.co.kr | 1. Outline - A Minute Bubble Generator (. or MB chamber) consists of a pump. a venture and a MB chamber. A MB chamber transports and circulates water in a water tank through a pump. while naturally receiving gas (air. oxygen and ozone) through a venture. Additionally. through the high-speed clash method. it makes continuous vapor atomization. 2. Introduction 3. Characteristics - Minute vapors spread in 40 to 180㎛ and has an average diameter of 1000㎛. - Vapors are created under the low pressure of 1.5kgf/㎠. - The diameter of each vapor is small and surface and a contact area are 20 times the existing one. - The creation of minute vapors maximizes the spread of vapor or the ratio of vapor dissolution → SOTE 61% - It enables oxygen and ozone to momentarily be dissolved to a saturation point. - It can keep dissolved oxygen high in aerotropic fire extinguisher and high-density waste water. 4. Application - Biological reactor’s oxygen provision - Floatation facility’s provision of minute vapors - Dissolution of ozone gas |
Equipment |
| 958 | Minute screen | Micro wedge bar screen | Hansung Environmental ENG Co., Ltd. | http://www.hansungenv.co.kr | 1. Outline - Minute screen is installed in the inlet of sewage treatment plant to remove the small adulterated materials. - It is movable with conveyor. Also. it is available to be operated by the timer with water level of in front and at the back of screen. In the overload. the overload-protective equipment is operated. - It is available to use the rakes by rake. brush and plastic wiper with the kinds of adulterated materials. 2. Introduction 3. Characteristics - Loss of head of wedge bar screen is small due to the small blockade. - Rake guarantees the high operating efficiency with the screen. - The discharge of adulterated materials is easy by the curved frame. - Maintenance is easy because the installation height is low. - There is no odor due to the complete sealed type. - It is able to install at the conventional water road without repairing work. - It is easy to control the chain tension by the take-up device. - The treatment efficiency is high by using the various rakes. - It is continuous to scrape and pull up. 4. Application - Village sewage treatment plant - Household wastewater/wastewater treatment plant |
Equipment |
| 959 | Miracle Sand Filter (MSF) | Miracle Sand Filter (MSF) | Miracle Water Co., Ltd. | http://www.miracle-water.co.kr | 1. Outline - This process conducts the advanced treatment of treated sewage water. - This facility is to remove T-P. organic materials and SS by condensing and filtering with injecting coagulant into the filtering tank. The treated water is reused and it is used to the area of total load restricted. The condensing and filtering process is composed of single reacting tank so the additional condensing and mixing tank is not needed. 2. Introduction 3. Characteristics - The condensing and filtering are performed in the single reaction tank and the top of the filtering layer performs the condensing. Minute floc produced at the top of the filtering layer passes the layer by water head and the solid and liquid are separated. When the water head rises by collecting the particle. the backwashing is performed by the disturbance of filtering later caused by the injection of backwashing water. - The removal efficiency of T-P is high. - The filtering speed is high due to the large porous ratio (65 - 80%) of media and the backwashing is convenient because of the low specific gravity of media. It can save the driving power cost by the low water head. - The emission of backwashing water is small and it has no secondary pollution such as noise and vibration. The operation and maintenance are easy. 4. Application - Sewage treatment plant |
Equipment |
| 960 | Mist collector | Mist collector | Changsin E&P Inc. | http://www.csplant.co.kr/ | 1. Outline • A separation and collection method that takes energy loss. efficiency. and economic feasibility into consideration through particle inertial impaction 2. Introduction 14Biz-89.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-89.JPG'>3. Character • It has an excellent. fast-flow collection efficiency. • It is appropriate for highly viscous fluids. • It lessens the contaminant blockage. • It is easy to clean and maintain. • It has low pressure loss. • It is relatively low cost with a semi-permanent usage. • Its diverse materials selection is available based on the operating conditions. 4. Application • Chemical processing • Machine tools • Metal processing factories • Oil recovery |
Equipment |
| 961 | Mist Collector (CO-Series) | CO-Series | CNA | http://www.cnaplant.com/ | 1. Outline - This Mist Collector (CO-Series) is a medium-large oil mist cleaner that removes mist and the product is suitable for use when there is a large amount of mist or the centralized equipment is required. 2. Introduction 3. Characteristics - Turbo- Blower ㆍInstalled with a non-vibration. low-noise turbo fan through high-precision work and electronic balancing work. ㆍIncreased suction efficiency through minimization of air friction resistance. - Manometer ㆍCheck on the status of dust accumulation in a filter. ㆍCheck on the time of dust removal and the time of filter replacement. - Control Panel ㆍInstalled with a lamp that checks operating conditions . - Caster ㆍConvenient moving and installation due to the installation of moving casters. - Filter ㆍPerfect collection of mist (99.97%) due to a three-layer filter structure. 4. Application - CNC Lathe - Cylindrical Grinder - Machining Center - Bolt bezel - Press machine - Centerless grinding machine - Gear gutting - Cleaning tank - High speed machining center |
Equipment |
| 962 | Misted Dust Collector | Kum-in Corporation Co., Ltd. | http://www.kum-in.co.kr | 1. Outline This dust collector is a condensing type that is not necessary for changing filter and absorbs water-soluble and non-water-soluble oil mist with a strong fan motor and then removes the mist through centrifugation. 2. Introduction 3. Characteristics For electric and electro devices. several exclusive devices (processors) for semi-conductor facilities. machine tools (CNC lathes. grinders. machining centers. honing machine. etc.). processors. automatic facilities. foodstuff manufacturing facility lines. all the other processes and facilities occurring mist 4. Application - Increasing productivity by enhancing agreeable and clean work place - Removing hazardous oil mist for the workers to prevent occupational diseases - Preventing slide on the floor to prevent accidents |
Equipment | |
| 963 | Mixer | Mixer | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - This Sludge Mixer has a function to prevent sludge sedimentation in a detention basin fundamentally and to distribute sludge evenly by maximizing agitation using a two-stage turbo agitator. 2. Introduction 3. Characteristics - Perfect prevention of sedimentation in a detention basin by attaching a two-stage agitator to the bottom - Stable running and minimum power consumption by low-speed operation at 5 to 18 rpm - Extended lifespan of a vibration prevention device by supporting the bottom of a Mixer axis 4. Application - Agitation of excess sludge in a detention basin - Agitation of thickened sludge in a detention basin - Agitation for preventing sedimentation in various detention basins |
Equipment |
| 964 | Mixing and Coagulation Device | Mixing and Coagulation Device | World Innotech Co., Ltd. | http://www.world-inno.com/ | Mixing and Coagulation Device 1. Outline • Flash mixer - It is a device used to combine chemicals with raw water before it is mixed with the coagulation agents. When the chemicals for coagulation are injected into the raw water. a powerful reaction occurs. • Coagulator - It is a device installed in a flocculation basin of a water purification plant and is used to improve the sedimentation efficiency by stirring the flocs. which are already mixed once by the mixer and are mixed again. more slowly. to form the larger flocs. 2. Introduction 14Biz-77.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-77.JPG'>3. Character • It has a great mixing performance. • Its service life span is long because it is designed not to cause any damage to its rotating parts. including the motor. the bearing. and the spindle. • Its speed control is customizable depending on the characteristics of the field. • Its mixing speed is adjustable depending on the changes in the condition of the raw water (water temperature. water level. and detention period). which allows the maintenance of stirring intensity. • It does not cause water pollution because it is equipped with a leakage prevention system. such as a leakage access hole. Its reducer is also designed as an enclosed type. • It is easy to maintain because it is a self-assembly type and has a simple structure. 4. Application • Water treatment device • Wastewater treatment device • Sludge treatment • Water pollution treatment and water purification |
Equipment |
| 965 | Mobile Filter | Sungwoo Co., Ltd. | http://www.sww.co.kr | 1. Outline Water can be produced and supplied by moving the modular unit of pressurized fine filter on the trailer for the water circulation supply to water park and outdoor swimming pool in a certain period and for the large amount of water production and supply. or when emergency water supply is necessary to the region that has no separate water purification facility. 2. Introduction 3. Characteristics - Water can be produced without restriction of time or location - Production capacity can be adjusted according to the number of filtration unit module - Can be applied for the filtration of all sorts of water quality - Easy for replacement and maintenance management - Superior treatment efficiency and semi-permanent lifetime 4. Application - Outdoor swimming pool - Water park and tourism complex - Emergency water supply in the backward regions |
Equipment | |
| 966 | Mobile Grinder | DAHO Mulsan Inc. | www.dahomulsan.kr | 1. Outline • It is a mobile grinder with caterpillar chassis for self-propelled driving • It is a grinder with heavy weight and high speed • The grinding system can be quickly replaced. and the final product can be changed within 15 minutes. 2. Introduction 14Biz-435_Mobile_Grinder.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-435_Mobile_Grinder.jpg'>3. Characteristics • Heavy rotating mass (about 2.5t/5.512lb) guarantees fast profits and highly efficient material processing. • The free swinging holder can be adjusted by grinding material. and it comes with a tip (flail). which can be easily replaced. • The replaceable basket grinds the grinding material of the tip. • A scraper that can sense a load transfers materials to a heavy roller with vibration bearing. and the roller also transfers materials safely to the crushing chamber. • It offers easy operation with are mote controlled system 4. Application • Waste woods and all types of shredding |
Instrument & Chemicals | |
| 967 | Mobile odor-measuring device (OMS-P6) | OMS-P6 | MnCo Inc. | http://www.mnco-ecc.co.kr | 1. Outline - Mobile odor-measuring device can display the intensity of odor and dilution number/temperature/humidity of Dynamic Olfactometry by the sensor module (6 sensors). 2. Introduction 3. Characteristics - The response time for the odor generation and extinction is short compared to the other model. - It secures the reliability of data by adjusting the zero of sensor using calibration gas 4. Application - Real time measurement in the actual odor-generation spot - Measuring the intensity of odor of odor-controlling area and residential area - Measuring the intensity of odor produced by the hatred facility (sewage treatment plant. foodwaste-to-resources center. and landfill site) -Evaluating the efficiency of prevention facility and maintenance |
Equipment |
| 968 | Modified feed well rounded settling pond | Modified feed well rounded settling pond | Jungang General Machinery Co., Ltd. | http://www.cagm.co.kr | 1. Outline - Maximizing the improvement of water quality of settling tank by mixing the hydrodynamics and the environmentology simultaneously. 2. Introduction 3. Characteristics - Maximizing the treatment efficiency - Available of the optimal design through the theory development. computer simulation and demonstration experiment. - Reducing the suspended solids more than 20% by improving the settling efficiency. - System to deal with the change of the quality and amount of raw water actively. - High reliability - Settling equipment of high efficiency researching the particle movement and dynamics - Securing the concentration of suspended solids of final discharging water below 10ppm as the optimal settling equipment - Cheap facility and operation cost - Securing the efficiency improvement by only changing the structure of settling device without changing the whole structure when the new plant or conventional plant want to enlarge the capacity. 4. Application - Waterworks purification plant - Sewage treatment plant - Wastewater and household wastewater disposal plant - Industrial field using the water |
Equipment |
| 969 | Monitor AMI pH-mV:pH-mV | Monitor AMI pH-mV:pH-mV | SWAN Analytical Korea | http://www.swankorea.co.kr | 1. Outline - Analyzer that can continuously monitors pH and oxidation-reduction potential (ORP) in running water and fluids. 2. Introduction 3. Character - Dual channel monitor for the continuous measurement of pH and oxidation-reduction potential (ORP) in running water and fluids. - PVC panel mounted on this system. - Dual channel transmitter: AMI PH/mV pH/mV. 4. Application - Water quality monitoring. |
Instrument & Chemicals |
| 970 | Monitoring & Proportional Control System | EH Solution | http://www.ehsolution.co.kr/ | 1. Outline • It is a system to control coagulant dosing in a phosphorus treatment facility of a sewage treatment plant. This system stabilizes T-P concentration and reduces the coagulant quantity and the sludge generation dramatically by controlling the coagulant dosing in real time. considering the phosphorus concentration. the rail fall. and the sewage properties of influent sewage. • Injecting coagulant using MPCS can reduce coagulant cost and sludge treatment cost because it can minimize the dosing by injecting quantitative coagulant after forecasting phosphorous concentration. 2. Introduction 14Biz-421_Monitoring_&_Proportional_Control_System.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-421_Monitoring_&_Proportional_Control_System.JPG'>3. Characteristics • Monitoring & proportional control system (MPCS) • Phosphate(PO4-P) concentration measuring is available. • Sample preprocessing (filtration) • Automatic analysis of coagulant dephosphorization efficiency 4. Applications • Water quality restoration center • Ecology water resources center |
Technology & Process | |
| 971 | Mortar Desquamation Technology | Mortar Desquamation Technology | Dongyang Environment Co., Ltd. | http://dongyang2000.co.kr | 1. Outline • Construction waste. recycled aggregate using waste concrete. is used for mounding. molding. and backfill. • It is a production equipment of recycled aggregates for concrete that improves absorption rate and density of recycled aggregates by desquamating mortar attached in recycled aggregates and removing a lump of cement using the front and the rear reciprocating comminutor and reverse slope convex roll mill. 2. Introduction 14Biz-128.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-128.JPG'>3. Character • It maximizes the desquamation time of aggregates by the front and the rear reciprocating level plane comminutor by a crankshaft and reverse slope convex roll rotating on the top of semicircle desquamation plate. It also uses friction and compression between aggregates to remove a lump of cement attached in aggregates. • It installs a height adjuster instead of stationary desquamation device for a load of device and aggregates quality depending on an input of aggregates to secure the best quality of recycles aggregates. • It uses machine structural Hi-Mn for desquamation plate to secure abrasion and durability of equipment and maximizes the life cycle of Hi-Mn by mobility of desquamation plate. • It applies the dry mortar desquamation device to stabilize scattering dust. noise. and vibration caused by low speed motion. 4. Application • Concrete recycled aggregates production |
Technology & Process |
| 972 | Moss Catch System | Sphagnum Series | Ilsong Co., Ltd. | http://www.ilsong.co.kr | 1. Outline - Living in a unique environment where higher plants cannot survive. sphagnum grows more than 10cm per year. an extraordinary pace of growth for bryophyte. Unlike higher plants. sphagnum creates a habitation environment where dead bodies are not easily decomposed through metabolism. Peat moss which is widely used in landscaping. gardening and agriculture is a carbonized form of sphagnum. Peat deposit is “carbon storage” containing a massive amount of carbon dioxide. 2. Feature Unlike other bryophyte. sphagnum grows more than 10cm per year. It fixes carbon through photosynthesis and maintains environment where the fixed carbon is not decomposed. - Though sphagnum belongs to cryptogam species. it can be used for an ornamental purpose with its apiculus as beautiful as flowers. 3. Introduction 4. Application Colony patch |
Technology & Process |
| 973 | Movable screen | Movable screen | Jungang General Machinery Co., Ltd. | http://www.cagm.co.kr | 1. Outline - It is a movable screen to remove the adulterated materials by rotating the screen linked with the conveying chain. - It is a movable screen to remove the adulterated materials by installing the guide on the main body and it guides the movement of caterpillar. the driving part is installed at the outside of main body and drives the conveying chain. 2. Introduction 3. Characteristics - It removes the adulterated materials stably by inducing the water inside the waterway. - It makes the screen bigger by installing the driving part at the outside of main body and the maintenance of driving part is easy. 4. Application - Water-collecting part of water purification plant - Removal of small and minute woods of sewage treatment plant - Removal of adulterated materials of pumping station - Removal of adulterated materials of water discharging station |
Equipment |
| 974 | Moving Screen | WISEENTECH Co., Ltd. | http://www.wtcom.co.kr/ | 1. Outline - It is coarse. fine and minute moving screen. which is installed in inflow entrance channel of waste water. sewage water treatment plant. Removing equipment such as an extractor removes concomitant in waste water. sewage water treatment plant by installing SS400. STS304. FRP into two serial caterpillar chins. classifying and removing concomitants in inflow water. 2. Introduction 3. Characteristics - No damage of machine with rotary screen bar - Simple lifting and removal apparatus for floating matter (screen bar+ single body RAKE) - Removes any floating materials - Easy replacement - Various kinds of screen (SS400. ST304. FRP) A gap in screen(20mm - 100mm) 4. Application Coarse. fine and minute |
Equipment | |
| 975 | Moving Screen | Moving Screen | WISE EnTech Inc. | http://www.wiseentech.com | 1. Outline This screen is divided into coarse. fine. and micro fine moving screens that are installed at the influent channel of wastewater and sewage treatment facilities. The moving screens made of various materials (SS400. STS304. FRP) are embedded into two-lane caterpillar-type chains. which circulate. powered by running gear. to separate and remove solid wastes from the influent. Thus. the device meets the needs of waste water and sewage treatment facilities and drainage pump stations that obviate the need for a separate solid waste disposal facility such as rake. 2. Feature - The screen bar is in the shape of a revolving table. which prevents the screen from suffering any congestion that might result in overflowing and damage to the device. - The device to transfer solid waste is designed in a simple way. (Combination of screen-bar and rake) - It is possible to remove solid wastes. - It is replaceable in a very easy way. -The screens made of various materials are available. -Apertures in screen reach 20mm to 100 mm. 3. Introduction (COARSE. FINE. MICRO MOVING SCREEN) 4. Application - Removal of solid wastes |
Equipment |
| 976 | Moving-plates evaporation and dehydration equipment | OHK Co., Ltd. | http://www.ohk.co.kr/ | 1. Outline - It concentrates and dehydrates sludge. which is produced from sewage treatment plant. dirty water treatment. excreta disposal treatment and other industrial plant. It dehydrates from low concentrated sludge to high concentrated sludge (3.000 - 5.000mg/l) up to moisture content. 75%. It prevents clogging. which can be caused by fixation of sludge. 2. Introduction 3. Characteristics - Only product with 6 accreditations with a single environmental facility - Accreditations in dehydration facility for the first time - Accreditation with energy-efficiency as environmental facility - High efficiency and excellent performance of system - Solve problems such as noise. offensive odor. vibration. recycle water. and waste electric power in existing products - Automatic operation consistently. simple maintenance - Small installment area. economical construction expense(20 - 30% of existing facility) - Applied to sewage water. waste water. livestock. excrements. paper. and precipitated water - Technology with accreditation superior to other existing technologies 4. Application - Dehydrating sludge. concentrating sludge. preventing sludge block. consistent operation without man force. remote control and monitor function |
Equipment | |
| 977 | Moving-plates Evaporation equipment | OHK Co.,Ltd. | http://www.ohk.co.kr/ | 1. Outline - Body with U-Trench Type immobile and moving-plates (Disk type evaporation equipment with immobile and moving rings) - Inflow sludge is transferred by screw and emitted through the crack between moving-plates - Consistent moving-plates prevents the sludge fixation and block crack between plates - Enhance emitting filtrate and concentration rate - High efficient concentration by dehydrating sludge with screw’s mixing effect 2. Introduction 3. Characteristics - 24 hours automatic operation as high performance and efficiency technology - Compact and light product - Simple operation and reduction on operating expense without additional facility - Durable body without change and wear. and reduce restoration expense - Control concentration rate and treating amount by controlling rpm and rake angle - Clean environment by minimizing noise. vibration. offensive odor and secondary pollution - Save energy with the least electronic power 4. Application Concentrating sludge. preventing sludge block. consistent operation without man force. remote control and monitor function |
Equipment | |
| 978 | Multi –hole controllable orifice valve | Multi –hole controllable orifice valve | Samjin Precision Co. Ltd. | www.samjinvalve.com | 1. Outline This Multi –hole controllable orifice valve can be used in a low open degree because it has a good capability to control cavitation and operation by small torque is possible as a fixed disk and a moving disk in multi hole work by a slippery friction surface. 2. Introduction 3. Characteristics - Using in high differential pressure and high velocity of flow at a pipe end is possible. - Wide space to install is not required due to compact design. - This product can be used to reduce pressure and adjust flux in a large conduit line. 4. Application - Inflow to distributing reservoir - Outflow valve - Decompression of large conduit line - Flow regulation valve - Diverting valve |
Equipment |
| 979 | Multi cyclone | Multi cyclone | Entec Co., Ltd. | http://www.en-tec.co.kr | 1. Outline - It installs the small cyclone more than 2 equipments in parallel. - The mechanical cyclone dust collector has an excellent dust-collecting efficiency as it is a small structure. Therefore. it can improve the efficiency by arranging the cyclone in parallel because it can save the pressure loss. - It is used to remove the flying ash being contained in the combustion gas of boiler. 2. Feature - Economical price - Simple structure - Ni additional maintenance - Ideal equipment for the pre-treatment of electric cyclone or filtration equipment - Available of operation in the high temperature - Excellent dust-collecting efficiency for the diameter more than 5㎛ - Low efficiency ratio (especially minute particle below 5㎛). expensive operation cost (because of the pressure loss) 3. Introduction 4. Application - Boiler dust - Back part of incinerating furnace - Dust of large diameter - Pre-treatment of prevention facility |
Equipment |
| 980 | Multi Drum Screen and Mesh Screen | Multi Drum Screen and Mesh Screen | Keojin Industrial Co., Ltd. | http://www.keojin.kr | 1. Outline - Sewage/wastewater flowing into the inflow box goes overflow at the top and falls inside of the drum screen. The find screen filters solid materials in the sewage/wastewater and sends them to the outlet through a spiral path in the drum screen while discharging treated water to its down side. - An automatic timer sprays washing water in regular interval to prevent the find screen from being clogged ensuring continuous operation. 2. Introduction 3. Character - Automatic unmanned operation. easy maintenance. - Prevent clogging by self-washing. - Save treatment cost by minimizing moisture content. - All-in-one type. small installation space. - Hygienic treatment. 4. Application - Domestic wastewater. industrial wastewater and solid materials. - Sludge separation and elimination from domestic and industrial wastewater. - Concentration. separation and retrieval of low/high concentration synthetic resin materials and the by-products. |
Equipment |
| 981 | MULTI SUMP ULTRASONIC CLEANERS | MULTI SUMP ULTRASONIC CLEANERS | MULTI SUMP ULTRASONIC CLEANERS | http://www.hsonic.com/ | Product Description This cleaner supports a variety of cleaning methods such as ultrasonic cleaning. washing. steam drying. and others. By harmonizing the physical and chemical interactions between the ultra sonic waves and detergent. foreign materials stuck on parts can be cleaned out. It is used frequently. in a variety of industries. The detergent-recycling feature makes it an economical choice. | Equipment |
| 982 | Multi-Dehydrator | Multi-Dehydrator | Energos co.,Ltd | http://www.energos.co.kr | 1. Outline - A Multi-Dehydrator (DEOS) incorporates mechanical and electrokinetic dewatering techniques into one. DEOS series is a secondary dewatering device designed for sludge processing with existing mechanical dehydrator. 2. Introduction 3. Character - After primary processing. sludge cake is treated by both mechanical and electrokinetic dewatering. -Forms sludge cake with 60~65% of water content. - Lowers water content with its proper electrokinetic structure and a layer of filter cloth - High performance. low energy consumption 4. Application - multi-dehydrator |
Equipment |
| 983 | Multi-Disk Dewatering Machine | KS-RTTYPE | ARK Co., Ltd. | http://www.ar-korea.com | 1. Outline -The active sludge forms the flocs through a chemical mixing process via the flocculation tank and thereafter the sludge migrates through the flocculating and the mixing process to the main body. The main body of the dewatering machine body is divided into a screw part spinning at a fixed speed and a filter part moving slightly side to side according to the spinning. In the filter part. driving disks and fixed disks are laminated between the washers thereby the sludge is dewatered by the principle of the filtered fluid being discharged into the gaps created during this thickening process. 2. Introduction 3. Characteristics - High Efficiency. Stable Dewatering - Low vibration and noise due to its low spinning speed - Electricity Use Reduction Effects from the power use as about 3KW that is a tenth of existing ones. - By direct Pull-out of the active sludge in the aeration tank. it resolves the issue of foul odor from the thickening tank. the detention tank and at the same time it can reduce the construction expenses required for building the thickening tank and the detention tank 4. Application - High Concentration Sludge Treatment |
Equipment |
| 984 | Multifunctional Lakes & Marshes Managing Ship | Cheongho Environment Development Co., Ltd. | http://www.cheongho.net | 1. Outline - This ship is an onshore transporting collecting ship with 3 collecting functions. collecting waste floated on the lakes and marshes. collecting and removing aquatic plants living under the water or reeds living around lakes and marshes. and collecting algae. 2. Introduction 3. Characteristics 1. Rotary screen typed algae collecting device (This ship can collect closed algae efficiently.) 2. Waste collecting device (This ship collects waste with a sucking device and nozzles on both front side of this ship.) 3. Algae removing device (This ship removes algae under the water and reeds around lakes and marshes efficiently.) 4. Application ① Algae collecting device - A buoy typed algae collector collects algae and water separately and separates processed water and closed algae individually with 2 speed rotary screen. -Closed algae are separated by the algae collector below this ship. ② Waste collecting device - The 2 arms shaped nozzles installed on the frontal both side of this ship and water jet of a sucking device on this ship gather and surround the wastes and algae floated on the water. and then collects them to a lifter typed collecting container. ③ Aquatic plants removing device - A remover installed in front of water supplying pipe removes the aquatic living under the water. ④ Collecting bags - Collecting bags keep the wastes from a lifter typed collecting container temporarily. It can be assembled into or dismantled from the ship. After collecting work is finished. the lower part of the bags is opened to let the wastes and algae loaded easily on trucks. |
Equipment | |
| 985 | Multi-gas leak alarm | MC-2100 series | Wisesensing, Inc | http://www.wisesensing.com | 1. Outline This MC-2100 series is a multi- unit panel incorporated with DC power Supply and a terminal block for atmospheric environment inspection. 2. Introduction 3. Feature - MC-2100 series is a multi-unit rack to detect various gases continuously. - Compact panel with various features - Easy maintenance and installation - Digital LED bar Monitor type - Can be attached to the walls or panels - Easy installation and wiring of detectors - Various channels including channel 3. 6. 9. 12 and 15 - Can select among MC-2103. 2106. 2109. 2112 and 2115 depending on user’s demand - DC Power Supply and a built- in main power switch panel - Built- in individual power switch for each indicators - Various power (AC 110V. 220V or 50/60 Hz) 4. Application - Gas leak alarm |
Equipment |
| 986 | EXO | DONGMOON ENT CO., Ltd | http://www.dongmoonent.co.kr | 1. Outline This multi-item water quality checker “EXO” is designed to measure every kind of sensors up to 250 meters deep into the water through the use of the Titanium-made Probe. In addition. it proves more stable than the existing SUS when it applies to oceanic environment. What’s more. the new device featuring a metal-based Bulkhead curtailed the need to replace the bulkhead that had to be replaced frequently when coils malfunctions. Furthermore. the device is embedded with an Urethane-made Connector so that corrosion can no longer occur to the Connector. 2. Introduction 3. Characteristics - Enable data communication and adjustment through Bluetooth -Feature a computer chip in each sensor. which provides the status of the sensors and saves adjusted values in the Probe - Enable adjustment of multiple turbidity sensors with the use of a single EXO - Enable automatic sensation and detection whether the Probe. connected with KOR software. is plugged or not - Enable the use of the Probe anytime and anywhere by adopting a universal smart port - Increase a sensor’s overall response period. accuracy and measurement range. - Increase Probe’s measurement accuracy and representation by inserting a factory adjustment value into each Probe 4. Application - Water quality check |
Equipment | |
| 987 | Multi-Item Water Quality Gauge | Aqua 2000 | Suntech Engineering Co., Ltd | http://www.suntech-eng.co.kr | 1. Outline - The device is designed to transmit real-time measurement of tap water quality as to turbidity. remaining chlorine. hydrogen ion and water temperature. and to determine an inactivation ratio and sterility of tap water with the application of the patented technology by using the data. 2. Introduction 3. Character - All-in-One water temperature gauge capable of simultaneously measuring five water quality items. - High accuracy for reinforced water quality standards: High-precision and high-durability sensor. - Minimizing water waste by limiting the use of sample to 200ml. - Measuring. indicating and transmitting the number of inflowing samples. - Applying sensor to entire items. - Easy maintenance. - Automatic correction. 4. Application - Fluid Biological Slime Carrier |
Instrument & Chemicals |
| 988 | Multi-layer conical diffuser | ANT 21 | http://ant21net.cafe24.com/xe/en_sub02_01 | 1. Outline UFO Diffuser is the system to generate uniform bubbles of the triangle pitch method. As the rate to deliver oxygen. the agitation function. and the energy-saving effect due to low pressure loss are excellent. it is widely used in general filtration plants. sewage and waste water disposal plants. and sewage disposal tanks. 2. introduction  http://img.konetic.or.kr/apec-vc/xml/img/market_place/Multi-layer_conical_diffuser.jpg'>3. Characteristics - Disk : ABS - Bolt and nu : Nylong - Connecting stalk 20A socket type 4. Applications - Sewage disposal plants - Sewage treatment plants - Hygiene treatment plants |
Equipment | |
| 989 | Multi-Media Filter | Multi-Media Filter | DSP Inc. | http://dsplant.or.kr/ | 1. Outline • It is a system to remove turbidity matter contained in supply water and fine colloid matter by passing them through media layers. • It is classified as single-media filter. dual-media filter. and multimedia filter depending on the filling method of the used media. It is classified as low-speed filtration and rapid filtration depending on the pressurization of supply water. 2. Introduction 14Biz-139.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-139.JPG'>3. Characteristic • It is a system to pass liquid containing turbidity matter through porous media layers to remove turbidity matter is called a filtration system. It is required as preprocessing facilities of all purification treatment. • Anthracite. silica sand. and garnet are used as media. and these are formed and used as a single layer or multi-layers. • Water containing turbidity causes pollution by precipitation and closure and becomes the origin that causes a great problem on the effect and life cycle of all purification facilities. Therefore. it needs to be treated and used thoroughly. 4. Application • All purposes where normal filters can be used • Filter accelerated clarifier treated water • Filter water with low turbidity • Removal of small amount of iron (Fe) and manganese (Mn) • Filter cooling top water |
Equipment |
| 990 | Multi-parameter Analyzer | 770MAX | Mettler Toledo Korea | http://www.kr.mt.com | 1. Outline - THORNTON 770MAX Multi-parameter Analyzer/Transmitter equipped with the smart sensor technology supports monitoring through 6 channels on conductivity. resistivity. pH. ORP. dissolved oxygen. Ozone. TOC. flow rate. temperature. pressure and the level of water 2. Introduction 3. Characteristics - 6 channels for sensor input (4 Smart Sensors plus 2 Pulse Flow Sensors) - Display 16 measurements possible at maximum - 4 powered analog outputs standard. 8 optional (0/4-20mA) - Convenient and Compact Design - NIST-traceable automatic meter calibration system for all measurement range 4. Application -Water Quality Measurement and Monitoring |
Equipment |
| 991 | Multi-Parameter Measuring Meter | SA8065.104 | Online Instrument Co., Ltd | http://www.online-ins.com | 1. Outline - This product is designed to output measured values yielded through simultaneous measurement of water level. temperature. conductivity. pH. ORP Turbidity (option) into RS485/RS232D by using a single electrode (with a diameter of 70mm) applicable up to the 350 meter-deep water. 2. Introduction 4. Application - Well Water - Underground Aquifers - Rivers & Lakes - Estuaries & Oceans Wastewater Treatment - Industrial Effluents |
Equipment |
| 992 | Multiparameter Water Quality Equipment | SUNTECH ENGINEERING, Inc. | http://www.suntech-eng.co.kr | 1. Outline • This equipment measures and transmits the water quality of tap water automatically. continuously. and in real time. • It measures water quality and the flow rate of many parameters. such as turbidity. residual chlorine. hydrogen ion (pH level). electric conductivity. water temperature. and others. at the same time and determines and displays the disinfection and inactivation ratio of tap water in real time using these data. • The applied water quality measurement tank has a single. integrated. multi-sample chamber structure. It is designed as gravity type with a single path from the inflow of the sample (measured sample) water to its discharge. This structure measures all parameters with minimum flow rate and then discharges it. • It is an eco-friendly. high-precision water quality equipment that reduces wasted water after measurement by 10% or less compared to the existing method that uses a storage tank. 2. Introduction 14Biz-160.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-160.JPG'>3. Characteristics • An all-in-one water quality equipment that measures five parameters of water quality at the same time • High measurement accuracy for strengthened water quality standards: high-precision and high-durability (2 years) sensor • Minimizes wasted water by using 200 ml. the minimum quantity of sample (tap water) • Measures/displays/transmits the flow rate of the sample water inflow • Applies the non-reagent (electrode)-type sensor to all parameters: one-touch structure with easy detachment and replacement • Applies a Korean menu. a help feature. and a wide touch screen: user-friendly • Provides measured data storage and trend (graph) functions • Easy maintenance: compact size and structure and auto calibration 4. Application • Measurement of the water quality of tap water in real time • Measurement of the disinfection and inactivation ratio of tap water |
Equipment | |
| 993 | Multipath Ultrasonic Flowmeter | Multipath Ultrasonic Flowmeter | SUNTECH ENGINEERING, Inc | http://www.suntech-eng.co.kr | 1. Outline • It is a high-precision flowmeter that evaluates the time difference that has occurred through the ultrasonic time difference exchanged between the converters of the upper and lower regions; is installed in a pipeline; measures flow velocity. v. on the multimeasurement line through the weighting method; double-integrates (multiplies) flow velocity and area; and calculates flow rate without the flow coefficient. It also minimizes measurement errors at the site in which it is hard to maintain a straight pipe run. • The ultrasonic time difference method organizes calculation. saving. and communication functions separately by using dual CPUs and the modified weighting method. which improves the accuracy by shooting ultrasonic waves to up to 20 times per minute. 2. Introduction 14Biz-159.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-159.JPG'>3. Characteristics • High accuracy • Flow velocity ratio aware flowmeter • Suitable for areas in which it is hard to maintain a straight pipe run • Makes available flange-type and uninterrupted water supply method; shows a constant performance regardless of the method. • Strengthens data download and maintenance • Fast booting speed as it uses dual CPUs • Diverse information and screen design 4. Application • Flow rate measurement |
Equipment |
| 994 | Multi-path Ultrasonic Flowmeter | Multi-path Ultrasonic Flowmeter | Suntech Engineering Co., Ltd | http://www.suntech-eng.co.kr | 1. Outline - Multi-path ultrasonic flowmeter is developed as a high-precision flowmeter to produce flowmeter by applying double integration to flow speed and size and measuring flow by calculating time difference arising from the difference of ultrasonic time that results from the exchange between transmitter installed in the upper and lower sides of pipes. 2. Introduction 3. Character - Flowmeter with a high density of measurement. - Ultrasonic multi-path flowmeter recognizable of flow ratios. - Multli-path flowmeter for measuring areas where it is hard to measure. - Constant performance enabling direct treatment of flange-type fluid flow water. - Reinforced data download and maintenance. - Faster booting speed with the use of dual CPU. - Provision of various information and screen. 4. Application - Multi-path ultrasonic flowmeter |
Instrument & Chemicals |
| 995 | Multiple layer filtering device | Multiple layer filtering device | Daeseung Plant Co., Ltd. | http://dsplant.or.kr | 1. Outline - It eliminates the SS. chromaticity. turbidity. etc. This preprocessing equipment for the stable operation of the membrane system and the deionizer & ultrapure water system (Ultra-pure water plants). The basic organization is the composition of the multi-media filter. feroxer. activated carbon filter. micro filter. etc. 2. Introduction 3. Character - By “filtering device”. it means the device for eliminating the turbidity components by making the liquid containing the turbidity components pass through the porous excess layers. This is a preprocessing facility for all water treatment. And it is a process that is absolutely needed. - As for the filters. there are anthracite. silica sand. garnet. etc. These are used by forming single or multiple excess layers. - The water containing turbidity becomes a start that causes great problems regarding not only the precipitation and the closed contamination but also the effectiveness and lifespan of all water-cleaning facilities. As such. use it after processing it thoroughly. 4. Application - All uses with which the general filter can be used. - The filtering of the processing water for the cohesion precipitation device. - The filtering of the water of which the turbidity is low. - The elimination of very small amounts of iron and manganese. - The filtering of the cooling tower water. |
Equipment |
| 996 | Multiple round plate dehydrator attached with concentrator | Multiple round plate dehydrator attached with concentrator | ARK Co., Ltd. | http://www.ar-korea.com/main.asp | 1. Outline - Multiple round plate dehydrator attached with concentrator has an effect to reduce the sludge and the cost of installation and maintenance. It is different from the conventional method. storage tank. thickening tank. and dehydrating tank. - Also. it contributes to the improvement of company’s image by reducing the public complaints caused by odor when treating the sludge. 2. Introduction 3. Characteristics - Looking over the sludge treatment process of multiple round plate dehydrator attached with concentrator. firstly. surplus sludge flowed in by the sludge injecting pump at the thickening process formed a floc mixed by polyferric sulfate and polymer. Formed flocs are thickened when the retention liquid separated from the sludge is discharged through discharging equipment. Discharged liquid is flowed in the treatment plant and concentrated sludge is moved to the dehydrator. - At the dehydrating process. the concentrated sludge is flowed in the dehydrating facility and it is discharged as a cake of high density by compressed thickening. 4. Application - Advanced sewage and wastewater treatment |
Equipment |
| 997 | Multiplex Plate Dewatering Machine | Multiplex Plate Dewatering Machine | ARK Co., Ltd. | http://www.ar-korea.com/ | 1. Outline • In the part of this machine where the thickener can be found. the surplus sludge flowing into the bottom of the thickener forms hard flocs via the flocculation tank and moves to the upper part. • The filtrate. which is separated from the sludge. is discharged via the filtrate discharger fixed in the middle of the thickener. and the flocs are thickened. • In the dewatering part of this machine. the thickened sludge is dewatered by the rotating screw at a set speed and by the filtering device. which moves slightly from side to side by the rotation. 2. Introduction 14Biz-56.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-56.jpg'>3. Character • Excellent for mild concentrations • Constant concentrations • Efficient dewatering because of high concentrating ability • Low vibration and noise • Low maintenance cost • No malodor problems • Low installation cost 4. Application • Thickening and dehydrating flocs • Discharging dewatered cake • Resending dewatered filtrate • Condensing and thickening active sludge |
Eco-Friendly Products |
| 998 | MULTISIEVE SCREEN | MULTISIEVE SCREEN | Keojin Industrial Co., Ltd. | http://www.keojin.kr | 1. Outline - When water or raw material flown into the system fills the head box to the top. it spills over the wall and flows down onto the screen. - The water or raw material is dehydrated while passing though 3-step slopes with different steepness. The most moisture is removed at the first slope but solid materials keep sliding to the second slope. - Dehydration is completed at the third slope while slowly flowing down the gentle slope and the solid materials slid from the second slope are pushed to fall down to the screen bottom 2. Introduction 3. Character - Wave-shaped structure prevents jam. - Quick and efficient dehydration. - Semi-permanent product life. easy to operate and repair. - Very low maintenance cost. 4. Application - Sewage/wastewater treatment plant. raw material retrieval process |
Equipment |
| 999 | Multistage Compound Deodorizer | Multistage Compound Deodorizer | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - Multistage Compound Deodorizer is a device that applies a multistage process with medical fluids to perfectly purify complex odors containing the complexity of acidity. alkalinity and neutrality which occur simultaneously due to a variety of emissions sources. 2. Introduction 3. Characteristics - Very high removal efficiency of complex odors as this single tower uses a multistage purifier - Effective neutralization of acidic. neutral and alkaline odors and oxidation - Convenient disposal of impurities contained in odor gases - Economical and efficient as this Deodorizer requires a small installation space and has a simple structure - Hardly affected by surrounding temperature and humidity - Immediate response to changes in odor properties (change of medicinal fluid for each stage) in case of an actual outbreak of odors 4. Application - Removal of complex odors in sewage and wastewater treatment plants - Removal of complex odors in excrements and livestock wastewater treatment plants - Removal of complex odors in food waste treatment plants - Waste treatment plants and middle collection places |
Equipment |
| 1000 | Multistage Compound Deodorizer | Cheonbo Engineering | http://cheonbo.co.kr/ | 1. Outline • It is a multistage compound deodorizer to clean offensive odor that contains various emission sources. including acidity. alkalinity. neutrality. etc. • It has very high purification efficiency through single tower purification. 2. Introduction 14Biz-418_Multistage_Compound_Deodorizer.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-418_Multistage_Compound_Deodorizer.JPG'>3. Characteristics • Neutralization and oxidation reactions; effective for acid as well as for neutral and basic odors • Easy treatment of impurities contained in a bad smelling gas • It requires a small installation area and simple structure. which are economical and efficient. • It is unaffected by ambient temperature and humidity. 4. Applications • To purify the compound odor of a sewage treatment plant • To purify the compound odor of human waste and livestock wastewater treatment plant • To purify the compound odor of a food waste treatment plant. • Waste disposal site and middle collection place |
Energy |
반응형
'놀면서 일하기 > 창업 아이디어링 + 문서' 카테고리의 다른 글
| 환경산업 관련 제품 및 기술 목록 : 1201-1400 (0) | 2023.12.25 |
|---|---|
| 환경산업 관련 제품 및 기술 목록 : 1001-1200 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 601-800 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 401-600 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 201-400 (0) | 2023.12.25 |
댓글