728x90
반응형
야외 방수 태양광 조명, 모션 센서 투광 리모컨, 파티오 차고 뒤뜰용 3 가지 모드, 106LED
https://s.click.aliexpress.com/e/_DEba1Zz
8.2US $ 78% OFF|106led Solar Light Outdoor Waterproof Motion Sensor Floodlight Remote Control 3 - Solar Lamps - Aliexpress
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
환경산업 관련 제품 및 기술 목록 : 1001-1200
| NO | 제품명 | 모델명 | 회사명 | 홈페이지 | 내용 | 카테고리 |
| 1001 | Multi-step Constructed Wetland | Multi-step Constructed Wetland | ASSUM ECOLOGICAL SYSTEM INC. | http://www.assum.co.kr | 1. Outline As floating-type constructed wetland considering complex water environment of Korea. Multi-step Constructed Wetland is the eco-friendly next-generation technology of constructed wetland by improving an aeration effect and maximizing staying time of a water body and microbes through the construction of a wetland treatment tank in the multi-step type. 2. Introduction 3. Characteristics - Eliminate phosphorus and nitrogen with water-purifying aquatic plants - Secure the largest flow way with multi-steps. improve staying time and aeration effect - Improve elimination efficiency of microbes by extending the contact area with microbes in a narrow place - Easy to remove or change organic matter adsorption by an eco-filter made of eco-friendly materials - Easy to observe and manage the ecosystem with controlling channels - Require no additional energy as it is a surface-flowing type - Create Biotope - Create natural landscape - Low construction cost 4. Application - Ecological filter bed |
Technology & Process |
| 1002 | Multi-Water Quality Monitor | M-1000 | TECHNOLOGY & ENVIRONMENT CORP. | http://www.watersensor.co.kr | 1. Outline - This product is a multi-water quality monitor that can measure water quality easily and accurately in various points from raw water. water and waste water. agriculture and fisheries and sea areas even vacation spots. 2. Introduction 3. Characteristics - This product is equipped with a sensor and a probe that can measure DO 0 ~ 50 ppm. PH 0 ~ 14 unit. CL- 0~ 1000 ppm. NO3- 0~ 1000 ppm. NH4+ 0 - 1000 ppm and ORP -1.200mV - +1.200mV. - The range of temperature measurement is from -5 to 75 ℃. - The SP Cond and Conductivity is from 0 to 100ms. - The range of salinity measurement is from 0 to 70 ppt. - A pc terminal is basically used to display the screen and an exclusive LCD terminal. a tablet or a smart phone is available as an option. 4. Application - Water Quality Measurement |
Equipment |
| 1003 | MUST Process | MUST Process | MUST Process | http://www.dmpt.co.kr | 1. Outline - This technology uses a hybrid method which combines 0.1㎛ submerged plane membrane module with anoxic/expiration process. It removes both organic materials and ion in the waste water. Instead of the final clarifier. it installs submerged plane membrane module within the expiration tank to provide perfect separation between solid and liquid through membrane separation to achieve high treatment efficiency. 2. Introduction 3. Characteristics - Sedimentation tank or filter is not necessary - By replacing the sedimentation tank with the separation membrane. stable treatment is possible disregarding of the bulking of the sludge. - Maintenance of the high-density microorganism within the reactor is possible that the advanced treatment efficiency increases. - The system perfectly separates between the solid materials and liquid - Remodeling of the system is possible by installing plane membrane module within the reactor without additional construction. - Maintenance is convenient. 4. Application - New small and medium sewage and waste water treatment facilities - Conversion to advanced processing system - For the expansion of the capacity of the existing advanced treatment facility - For small sewage treatment facilities - To increase treatment efficiency through the replacement of the old systems with new system |
Technology & Process |
| 1004 | B3 Process | B3 Process | DAEKYUNG EN-TECH INTERNATIONAL Co., Ltd. | http://kdkme.dkme.com/index.asp | 1. Outline Organizing the B3 (Bio-Best Bacillus) system for the selective cultivation of the Bacillus as the dominant species utilizing their characteristics of spore formation in harsh living condition. and as an advanced treatment process for the removal of not only the organism but also the N and P in sewage. slops. livestock wastewater and night soil. this system is the best optimal process to retrofit the existing sewage/wastewater treatment plant as the advanced treatment without any odor problem especially. which is the major public complaint. 2. Introduction For the purpose of the removing the nitrogen and phosphorous. the bacillus species is formed and multiplied. and after that it will be formed as spore that improves the precipitation ability of spore and slugge. 2-1. Process of B3 system |
Technology & Process |
| 1005 | Nano Photo-catalyst | Nano Photo-catalyst | Biocera Co. Ltd. | www.biocera.co.kr | 1. Outline Biocera T. Biocera Photo-catalyst. is Anatase-type photo-catalyst TiO2 liquid. which is biologically and chemically harmless and most stable. and has a strong oxidizing capacity by forming electrons and positive holes with light. Accordingly. it has an excellent hydrophilic. anti-pollutant. sterilizing. and deodorizing capacity by decomposing various materials such as odor. organic pollutants. bacteria. fungi. dust. oil stain on the surface into carbon dioxide and water. 2. Feature - Cleanse indoor air by eliminating VOCs which are harmful to a human body such as formaldehyde. NOx. and Dioxin. - Absorb and decompose materials causing odors such as ammonia. trimethylamine. and hydrogen sulfide. - Eliminate dust and pollutants. - Have excellent hydrophilicity and anti-fog function - Create clean and hygienic environment with an antibacterial and antifungal capacity. - Have an excellent antibacterial. deodorizing capacity by continuing catalysis even without fluorescent or natural light by maximizing activity. 3. Introduction 4. Application - Air cleaning by eliminating VOCs - Deodorizing - Anti-pollutant - Anti-fog - Antibacterial/Antifungal |
Equipment |
| 1006 | Nanoceram Filter | Nanoceram Filter | Yuwontech Co., Ltd. | http://www.yuwontech.com/ | 1. Outline • It is a filter that contains new alumina fiber material with a width of 2 nm. • Its strong electropositive nature can hold dirt of up to 400 times more than the conventional membrane filters. It is an advanced filter that can be used in various fields. including virus and heavy metal removal. 2. Introduction 14Biz-57_nanoceram_filter.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-57_nanoceram_filter.JPG'>3. Character • This filter has a nano-alumina fiber with a strong electropositive. allowing it remove particles even when the flow velocity is high. thus lengthening its service life.. • It can remove silica. natural organic matters. metals. bacteria. DNA. virus. and other similar materials. • It can be directly applied to filter housing. a standard pleated filter cartridge type that is widely used. 4. Application • Water treatment equipment • R/O membrane pre-filter • Sterilization filter • Drinking water filter |
Eco-Friendly Products |
| 1007 | Natural Ventilation System | Natural Ventilation System | Cheil Tech Co., Ltd. | http://www.cheiltech.co.kr | 1. Outline - A system that purifies air not by holding it in a closed space but exchanging indoor air and outdoor air. and effectively removes fine dust. dust and storms. dust. odor. and volatile organic compounds (VOC) in the air while a heat exchanger releases natural anions and far-infrared radiation without generating harmful substances to human bodies such as ozone. 2. Introduction 3. Character - Anions Anion is a negatively charged atom or molecules. and exists in a state of an invisible particle electrically negatively charged in the air. - Catalysts 4. Application - Natural ventilation system |
Technology & Process |
| 1008 | Natural Ventilation System | Cheiltech Co, Ltd. | http://www.cheiltech.co.kr | 1. Outline • A natural ventilation system that purifies air by circulating outdoor and indoor air • Has no side effects caused by artificial air purification. • Naturally increases catalyst in activity and doubles the air purification effect through heat exchange because a catalyst is applied in the heat exchange filter member. 2. Introduction 14Biz-156.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-156.JPG'>3. Characteristics • Shielding absorption of electromagnetic wave • Basic removal of harmful elements from the human body through the effective shielding of electromagnetic waves that are generated from the drive motor of the heat exchanger • Insulation. low noise. and natural ventilation • Excellent insulation and noise decreasing effect • The internal housing of the heat exchanger uses natural ores to increase the reduction effect of electromagnetic waves generated from the interior of the heat exchanger. • Natural filtration and deodorization; antibacterial effect as well as an anion and far-infrared radiation emission filter • Removal of VOC. HCHO. and other harmful substances; natural filtration of anion and infrared radiation emissions 4. Application • Air purification |
Technology & Process | |
| 1009 | NDIR Gas Analyzer | Photon | KEMIK CORPORATION | http://www.kemik.co.kr | 1. Outline This NDIR gas analyzer. Photon. received type approval from the Ministry of Environment. The product selectively offers up to five NDIR sensors and up to three EC sensors for configuration. The device is used to measure gas of landfill sites. boiler combustion efficiency and heat loss. 2. Introduction 3. Characteristics - Use 512MB memory - Feature Heating Hose designed to adjust temperatures (100 - 190) - Make it feasible to use a two-level Peltier Dryer designed to adjust temperatures (20 - 2) - Make it feasible to perfectly measure without the intervention of vapor inside the chimney -Make it feasible to output and save real-time data using internal software (without the need for separate Data Logger) - Make it feasible to measure combustion efficiency. heat loss. smoke screen and flow velocity - Serve as a light-weight measuring device weighing 7Kg - Make it feasible to measure air pressure with the use of a high-precision DMS bridge sensor 4. Application - Measurement of landfill site gas. boiler combustion efficiency and heat loss |
Technology & Process |
| 1010 | NDIR Gas Monitor | maMos-400 | KEMIK CORPORATION | http://www.kemik.co.kr | 1. Outline This NDIR Gas Monitor is a ultra light-weight (4Kg) and low-cost high-precision series monitoring system. This series monitoring system is divided into channels 1. 2. 3 and 4 so that users may use the system depending on the conditions. In addition. the system. involving four equipment units. is designed to save real-time monitoring and data using internal software through PC without the need for Data Logger. 2. Feature - Use 512MB memory - Feature Analogue Output (0/4-20mA or 0-5/10V) across the channel - Guarantee easy installation and portability - Install a small-sized Peltier Dryer capable of measuring even when the level reaches 95%rH in maximum - Make it possible to precisely measure by allowing a user to freely set measuring and zeroing time - Make it possible to convert a unit (ppm or mg/m3) - Allow users to select an IR-Sensor in the range of concentration from 1ppm to 100% - Guarantee conversion into a 19-standard Rack type - Make it possible to measure air pressure of positions such as Tgas. Tamb and P 3. Introduction 4. Application - Surface analysis of landfill sites |
Equipment |
| 1011 | Negative Ion Ceramic | Biocera?TO | Biocera Co., Ltd. | www.biocera.co.kr | 1. Outline As a special ceramic emitting negative ion. Biocera TO has a trait of permanent electrode from its unique crystal structure and produces negative air ions by absorbing energy of harmful electromagnetic wave. In particular. unlike other negative ion ceramic products. Biocera TO is good for improving mental clarity. preventing fatigue. improving body functions. immunity. respiratory function. and emitting body wastes using tiny vibration of Piezo Electric. and makes living environment pleasant by eliminating harmful electromagnetic waves. 2. Feature - Eliminating harmful electromagnetic waves - Improving mental clarity - Preventing fatigue - Improving body functions - Improving immunity - Improving respiratory function - Emitting body wastes 3. Introduction 4. Application Producing negative air ions |
Technology & Process |
| 1012 | Neutralization technology using combustion exhaust gas | Neutralization technology using combustion exhaust gas | MIJI ENERTECH Co., Ltd | www.mijienertech.co.kr | 1. Outline - The company has the alkaline wastewater neutralization technology using CO2 in combustion exhaust gas from boilers or power plants. etc. As a method of purifying the waste water. this technology used the subacidity principle at a time when CO2 reacts with water to purify waste water. This is alternative technology to replace the total quantity of sulfuric acid. a common waste water neutralizing agent. 2. Introduction 3. Character - Control pH automatically using CO2 in exhaust gas. - Save pipe corrosion and chemical costs by replacing the total quantity of existing sulfuric acid. - Optimal control as the setting value of pH control range is 0.01%. - Improve the working environment where high toxic sulfuric acid is used. 4. Application - Neutralization technology using combustion exhaust gas. |
Equipment |
| 1013 | New and Renewable Energy | New and Renewable Energy | Samsung C&T Corporation Trading & Investment Group | http://www.samsungcorp.co.kr | 1. Outline - Samsung C&T Corporation actively promotes a solar power. wind power. hydrogen fuel cell and eco-friendly new and renewable energy business in order to prepare for an era of resource depletion and protect future earth environment. 2. Introduction 3. Character - Solar Power Generation Samsung C&T Corporation has established a solar power generation business by integrating each sector. ranging from solar power fuels including polysilicon. ingot and wafer all of which are existing business items to products like cells and modules. the system field and the construction and operation of a solar power generation plant. - Wind Power Generation Samsung C&T Corporation has actively sought business possibilities in promising business areas. mostly in Europe. USA and Canada. focusing its attention to the possibility of wind power generation business. Samsung C&T Corporation signed an agreement with Canada’s Ontario State Government for joint promotion for the creation of the world’s largest new renewable energy cluster. - Hydrogen Fuel Hydrogen fuel power generation produces electricity and heat through an electrochemical reaction between hydrogen and oxygen. Hydrogen fuel cells are a next-generation. pollution-free power generation technology because they produce a large amount of electricity efficiently and emits little greenhouse gases or environmental pollutants compared with existing power generation technologies. 4. Application - New and renewable energy business. |
Recyling |
| 1014 | New Eco Ventilation System | New Eco Ventilation System | AKRMT Co., Ltd. | http://www.akrmt.co.kr/ | 1. Outline - As buildings are getting manhattanized. doors and windows are getting highly sealed. and insulation materials are having a high-performance. it is getting difficult to do the natural ventilation in indoors. This New Eco Ventilation System is to provide fresh and clean air to the indoor environment where natural ventilation is difficult by keeping the fresh and clean air. controlling temperatures and humidity. emitting the polluted air. and bring the fresh outside air into the inside. 2. Introduction 3. Character - Easy to move/transport as it is light-weighted And because of the reinforcement. it is not easily bended. - Minimized the interference of the spring cooler pipes and the refrigerant pipes. - Easy to clean the interior. 4. Application - Ventilation system |
Technology & Process |
| 1015 | New Frequency Driver | New Frequency Driver | Yuwontech Co., Ltd. | http://www.yuwontech.com/ | 1. Outline • It is a resonance inducer that induces and maintains random frequencies. • The frequencies modify the crystal structure of calcium and magnesium. thus preventing the pipes from clogging by scale. • Its process efficiency is maximized because the pipe scale does not build up on the insides of the pipes. thus preventing energy loss and also reduces the expenses for personnel. chemicals. and wastewater treatment. • Its new frequency driver can be widely and efficiently used for the water treatment process. 2. Introduction 14Biz-60.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-60.JPG'>3. Character • It does not require external energy to operate. • It can be easily replaced. if necessary. because this unit is installed outside of the pipes. • It is an eco-friendly driver that does not require chemical injection. • It can be installed regardless of the flow velocity or volume. • It is economical with its long service life. • It is a new type of a scale remover that does not rely on traditional methods. such as the ultrasonic or the magnetic types. 4. Application • Prevent the scale of pipes. pump propellers or propeller waterproof membranes • Prevent the scale of automatic control valves. flow meters. densitometers. or pressure meters • Prevent the scale on the inside of heat exchangers. boilers. or agitators |
Eco-Friendly Products |
| 1016 | Next Sand Filter Sand | Next Sand Filter Sand | SAM BO SCIENTIFIC CO., LTD | http://www.sambosc.com | 1. Outline This Next Sand. filter sand is a medium removing silt. sediment. and turbid particles in the water. It reduces SDI remarkably. removes uneven turbidity. and has higher pressure and gravity filter flow and lower pressure drop. and has a better filtration capacity. 2. Introduction 3. Characteristics - High-performing filtration media: excellent in removing particles with the size of 3~5 um - Excellent filtration capacity. a double or higher filtration capacity than conventional multimedia - High processing speed: 3~4 times faster than existing multimedia due to an excellent filtration capacity - Long lifecycle (more than 5 years) and not exhausted in the middle of the process - Efficiently operable by simply back washing the media periodically and maintaining it clean 4. Application - RO Pre-treatment - Cooling tower - Treatment of supplied - Treatment of wastewater - Removal of sedimented metals - Reclamation and recycling of water used for car wash - Irrigation water |
Technology & Process |
| 1017 | N-Hexane eliminator within wastewater | CR-100 | Chung Rok Chemical Co., Ltd. | http://www.chungrok.co.kr | 1. Outline This product treats N-Hexane component in the wastewater polluted by water-soluble oil. 2. Introduction Main cause for N-H is water-soluble oil. Major origins are grease removal chemicals. cutting oil or automobile using large quantity of film material and automobile pats. aluminum rolling. appliance construction. coating (especially. zinc coating). wool or war wool cleaning process. These components are soluble in the wastewater. making it impossible to treat using physical treatment and can't expect to gain any performance by using general phosphorous chemical treatment. The reason is that water soluble OIL has emulsified in the wastewater. To treat these emulsion status water-soluble oil. emulsion breaker should be used as prior treatment chemicals then apply chemical treatment to gain high treatment efficiency. 1) Symptoms a. Exterior: colorless power or liquid b. PH: weal alkali 2) Consumption: 500 - 1.000 PPM (0.5 - 1 Kg/㎥) 3) Packing measurement: 20 Kg 3. Characteristics 1) Large usage area. (PH1-10) 2) It has outstanding absorption ability and it can remove ionic other pollutants 3) In case of low Precipitation Kinetics due to Pin Flock. improve Precipitation Kinetics. 4) Effective when Sludge is light and rising to the surface. 5) No separate prevention system since it utilizes the existing system. 6) Even higher performance by sharing with acid Inorganic Coagulants. 7) Produced flock is solid and unbreakable. 4. Application 1) Wastewater containing cutting oil 2) Wastewater containing film material 3) Wastewater containing grease removal chemicals 4) Electropaintable wastewater 5) Fiber wastewater | Instrument & Chemicals |
| 1018 | Nigh soil/livestock wastewater treatment method | EMBR (Ecoactiva Membrane Bio-Reactor) Process | Ecoactiva Co., Ltd. | http://www.ecoactiva.co.kr | 1. Outline EMBR system can be applied by improving the existing treatment system without any change of processes. easily operated. provide stabilized water quality. and completely control nutrient salts. such as T-N. T-P etc. 2. Introduction (see fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=IMP320-2.jpg></center> 3. Characteristics (1) It can secure a stable water quality of BOD 5 ㎎/ℓ or less and SS 0∼3㎎/ℓ or less. (2) It is strong to impact load and small in necessary volume as maintaining microorganisms in a bio-reactor at a high concentration of 8.000∼10.000 ㎎/ℓ. (3) It generates residual sludge of very small amount: residual sludge is used as soil improving agent or liquid manure. (4) It can multiply microorganisms of a slow growth. such as nitrifying bacteria as keeping SRT long. thereby providing effective nitrification and denitrification. (5) It increases feeding flux per unit area by increasing material transmission coefficient as acting as a turbulent promoter. and prevents lowering of flux due to biological precipitation onto the membrane surface. 4. Application Night soil/livestock wastewater treatment plants | Technology & Process |
| 1019 | Night soil treatment apparatus | High temperature aerobic liquid fermentation apparatus (TAOSYSTEM) | ALCHEM KOREA CO., LTD. | http://www.alchem.co.kr | 1. Outline A thermophilic aerobic oxidation system adopts an environment-friendly treatment mode in which livestock night soils to which TAO compound livestock night soils are added are inputted to the thermophilic aerobic oxidation system (TAOSYSTEM) and are then aerated under water using a underwater aeration unit for 16 – 20 hours. thereby allowing the weight of the inputted night soil to be light and fermented. At this time. during the processing. a TAO fermentation liquid fertilizer is produced. A resource mode for using the fertilizer in a liquid phase fertilizer shape or reducing it to a soil nursery fertilizer soil. may be used. 2. Introduction (See attatched file. fig 1) 3. Characteristics 1) Production of high-quality organic TAO fermentation liquid fertilizer 2) Realization of loss in weight due to evaporation 3) Complete removal of stink 4) Minimization of manpower through automation 5) No need for a bulking agent such as sawdust. etc. 6) Small installation area 7) Possible batch processing with combination of night soils without separation of solid liquid 8) No difference in processing efficiency depending on season 9) various installations depending on a farmhouse condition 10) Low operating cost 4. Applications Livestock waste and night soil treatment | Equipment |
| 1020 | Nitrate nitrogen automatic measuring device NOR-3000 | Donyang Electro-systems Co.,Ltd. | http://www.ando.co.kr/ | 1. Outline It gets the NOx-N concentration by removing colored substances from organic matters with 250nm absorbance calculation. as a monitor measuring nitrate nitrogen concentration during output of waste water. 2. Introduction 3. Characteristics - Translate NOx-N concentration function - Compensation of color elements function - Automatic cleaning cell function 4. Application - Nitrate nitrogen automatic measuring device |
Equipment | |
| 1021 | Nitrate Nitrogen Eliminating Equipment | Nitrate Nitrogen Eliminating Equipment | Midni Co., Ltd. | http://www.midni.co.kr | 1. Outline - Nitrate nitrogen eliminating equipment. 2. Introduction 3. Character - Nitrate nitrogen in drinking water causes various negative impacts on the health of human and livestock. The primary toxin is generated when nitrate nitrogen is reduced into nitrous acidic nitrogen by microorganisms. The reduced nitrous acidic nitrogen is absorbed into blood stream and reacts with hemoglobin causing partial loss of an oxygen delivery system function. Nitrate nitrogen can be eliminated by zeolite. ion exchange resin and a reverse osmosis method. Considering the effectiveness. ion exchange resin is used for a relatively small amount of water. while the reverse osmosis method is applied to treat water containing a large amount of chlorine ion. 4. Application - Elimination of nitrate nitrogen. |
Equipment |
| 1022 | Nitrate Removal Equipment | Nitrate Removal Equipment | MIDNI Inc. | http://www.midni.co.kr/ | 1. Outline • This equipment removes harmful nitrate nitrogen that exists in drinking water using anion resin. zeolite. and reverse osmosis. 2. Introduction 14Biz-169.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-169.JPG'>3. Characteristics • Nitrate nitrogen can be removed using zeolite. ion exchange resin. and reverse osmosis. In case of treating a relatively small amount of flow. which considers efficiency. an ion exchange resin filter is used. and for large-capacity or high–chloride ion content in raw water. reverse osmosis is mainly used. 4. Application • Livestock fertilizer plants • Wastewater treatment plants |
Technology & Process |
| 1023 | Nitrogen oxide analyzer | APNA-370 | Korea Horiba Co., Ltd | http://www.horiba.com | 1. Outline - An analyzer based on CLD defined in nitrogen oxide automatic gauge in air. Quick data can be gained since it analyzes with same gauge cell and detector by using cross modulation method which guarantees long term stability 2. Introduction 3. Characteristics - High sensitivity/high stability since there is no zero drift because a combination of Dual Cross Modulation and reduction method is used - Supplementary gas is unnecessary since all functions needed for gauging are included - Automatic correction is possible using SSGU-610: can be installed in APNA-3700 - Data retrieval is possible by directly reading data from Compact Flash Card 4. Application - Air pollution monitoring |
Equipment |
| 1024 | Nitrogen Pressurized Close Type Expansion Tank | Nitrogen Pressurized Close Type Expansion Tank | FLOWTECH Co., Ltd. | http://www.flowtech21.co.kr | 1. Outline - Equipment that has an expansion tank function and prevents pipe flushing and water hammer in a pipe line which is caused by a sudden stop of the circulating pump or abrupt opening and closing of a valve in the primary heat source pipeline of combined heat and power generation or district heating and cooling. The inside of a tank with access to expansion water is filled with 99.9% nitrogen gas produced from a nitrogen generator in the system and is maintained at low pressure in order to lower nitrogen solubility. 2. Introduction 3. Character - Working Temperature: 120℃. - Capacity: 100m2 per unit. - Constant expansion control function available during power failure. - Prevention of medium-temperature hot water flushing and water hammer in the pipeline in power failure. - Deaeration mode. (In case of initial heavy water or stationary automatic operation) - Emergency operation. - Control of nitrogen concentration. 4. Application - Combined heat and power generation. - District heating and cooling. - Resource recovery facilities. - Heat supply facilities. |
Equipment |
| 1025 | Noise Dosimeter | DC-112 | Kine Industrial Co., Ltd. | http://www.e-kine.com | 1. Outline - This Noise Dosimeter is a working environment noise meter used to establish a plan for hearing loss prevention and decide whether ear plugs are necessary and which type of ear plugs are necessary for workers in various industrial sites who are likely to suffer from hearing loss due to a long-term exposure to high noise levels pursuant to the Occupational Safety and Health Act. 2. Introduction 3. Characteristics - Equipped with functions of a dosimeter frequency. 1/1 frequency analysis and real-time noise monitoring with only one unit. - Implementation of a program for hearing loss prevention using a frequency analysis function. - Separate operation of the basic software and measurement and editing of a change in noise level as a real-time waveform. - Convenient confirmation of all values of dosimeter functions through the application of LCD widescreen display and performance of the function of displaying the frequency analysis and time waveform 4. Application - Measurement of Working Environment Noise |
Equipment |
| 1026 | Insulating Technology for Floor Impact Noise in Apartment Building | Insulating Technology for Floor Impact Noise in Apartment Building | Hanyang University | http://www.hanyang.ac.kr | 1. Outline - Analysis of floor vibration caused by variation in matter properties and the thickness of slab floor was done in order to reduce noise between floors. - Floor impact noise can be reduced by developing floor impact noise-reducing materials. finishing materials such as floor insulation material. and improved ceiling structure. - Current floating floor structure should be improved so as to design complete floating floor. 2. Introduction 2-1. Background - A survey of noise in June 2002 shows that people think noise and vibration are the most urgent environmental problems to be solved. - The Ministry of Construction and Transportation tightened the requirements for house construction. specifying that the light-weight noise should be below 58 dB and heavy-weight noise 5o dB. - Technology of repairing and maintenance for floor impact noise insulation is urgently needed. 2-2. Objective - Developing technology of dealing with floor impact noise <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=234_2.jpg></center> 3. Characteristics - Property of insulating materials and floor noise of insulating materials. supposed to reduce heavy-weight noise. were examined. - Various finishing and sound-insulating materials. expected to reduce floor impact noise. were applied to apartment building as a trial. - Finishing materials reduced light-weight noise by 9 dB but there was no effect on heavy-weight noise. - Appling floor materials on basic insulating materials can have additional effects in reducing noise. - As to the insulating materials applied to this study. an increase in floor impact noise level caused by resonance resulted in decreased function of noise reduction. - Floor impact noise is efficiently reduced by a ceiling structure employing sound absorbing/insulating materials - Level of heavy-weight noise was higher than expected and thus improvements should be made in this regard. - Heavy-weight noise was reduced to 4~6 dB by mixed structure of noise-insulating ceiling and floor. - Noise-insulating ceiling was proved to be more efficient. - It was analyzed that insulating materials of 20 mm or more is needed additionally to meet the requirements of laws regarding insulation of floor. 3. Application - Apartment building. offices. hotels. etc. | Technology & Process |
| 1027 | Noise Management | Noise Management | Inha University | http://www.inha.ac.kr | 1. Outline - A system that can analyze and evaluate noise data needs to be developed. 2. Introduction 2-1. Background - Civil petitions and conflicts related to environment noise of a city are increasing. - Since there is no system that can measure. analyze. and manage the environment noises. there is no objective data for the noises in the region of civil petitions and conflicts. - A system that can analyze and evaluate noise data needs to be developed. 2-2. Process <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=233_3.jpg></center> 3. Characteristics 3-1. Outdoor microphone that measures environmental noise - B and K 4189 microphone and UA1404 outdoor microphone kit are used. 3-2. Signal amplifier and Ethernet converter - It has a signal monitoring screen that shows if noise is received properly. and the noise analysis functions such as simple FFT (Fast Fourier Transfrom) and noise level analyzer. - It measure the noise through the internet network. and IP address is installed in the signal amplifier for the data transmission. - As a protocol converter that lets the system connect to the Ethernet-based LAN (Local Area Network). it is connected to the signal amplifier through RS-232c cable. and when the signal from the microphone is amplified by the signal amplifier. the noise data is transmitted to the central computer through internet. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=233_4.jpg></center> 3-3. Measuring device of environmental noise - A measuring device of environmental noise is produced. 4. Application - Measurement and management of environmental noise | Evaluation & Analysis |
| 1028 | Nonadditive Hypochlorite Generator | Nonadditive Hypochlorite Generator | Dongbang Innotek Co., Ltd. | http://www.dbcl2.co.kr/ | 1. Outline - Residual chlorine concentration of 0.1ppm to 0.4ppm needs to be maintained in order to secure delicious and safe water but the residual chlorine concentration decreases with time. which results in recontamination of water in a water tank. This Nonadditive Hypochlorite Generator is a device that generates hypochlorous acid with disinfection power by electrolyzing chlorine ions which exist naturally in water and maintains residual chlorine concentration without adding chemicals including hypochlorite. 2. Introduction 3. Characteristics - Maintaining residual chlorine concentration within a 0.1 to 0.4ppm range by automatically controlling residual chlorine concentration in a tap water tank. - High electrolysis efficiency and a long lifespan through special coating of electrodes. - Convenient transport and installation as this Generator is compact and lightweight and requiring no repair work when it is installed in an existing water tank. - Efficient utilization from a small to 50 ton water tanks as this Generator has a wide operating range. - Long-time safe operation due to functions of non-addition. automatic operation and self-protection and low operating costs. - Great effect of cost reduction as this Generator is small and a hanging type. 4. Application - Hypochlorite Generator |
Equipment |
| 1029 | Non-discharging system | Green Environmental Technology Co., Ltd. | http://www.getc.co.kr | 1. Outline - This system reuses the treated water as the process water by the non-discharging system after treating the wastewater produced by production processes. 2. Introduction 3. Characteristics - Expert technical power : supplying the best solutions with the know-hows accumulated by experiences of wastewater treatment during 20 years. supplying the differentiated non-discharging system with experiences of design. construction and maintenance of non-discharging system. manufacturing the world best water treatment facility (ASME U.S Stamp) - Economic system : saving the use of industrial water through the high reusing ratio of wastewater (recovery : more than 99%). minimizing the maintenance cost and saving the construction cost through the treatment facility of high efficiency. - Stable treatment process : treating the wastewater stably and supplying the best reused water by making the strong system for the change of flux and concentration of inflow wastewater. 4. Application - Food/feed industry - Chemicals/medicine-making industry - Steel/paper-making/electricity/electronics industry - Wastewater treatment/desalination facility |
Equipment | |
| 1030 | Nonmetal HDPE | Nonmetal HDPE | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - This non metal HDPE sluice gates are characterized by improving the weakness of conventional cast iron sluice gates. The non metal HDPE sluice gates have a lightweight and good corrosion resistance by using high density polyethylene. The non metal HDPE sluice gates can be applied to bad water quality. The non metal HDPE sluice gates come out with various sizes from small to large. 2. Introduction 3. Characteristics - Applicable to sewage. wastewater and seawater due to good corrosion resistance - Easy to handle and install because of being lightweight - Good air tightness with the form of a pressure wedging guide - Perfect air tightness by using EPDM Sealing 4. Application - Various sluice gates in wastewater treatment plants |
Equipment |
| 1031 | NON-METAL SLUDGE COLLECTOR | NON-METAL SLUDGE COLLECTOR | TASET | http://www.taset.com/ | Product Description APPLICATIONS This device is for scraping out and collecting sludge accumulated in a water purification plants rectangular sedimentation basin. as processed by a sedimentation basin hopper. a sewage disposal plant or a waste-water disposal plant. This is an improved device with higher performance ability and more simplified management than the previous model Metallic Chain Flight Type Sludge Collector. Product Feature CHARACTERISTICS & ADVANTAGESA driving unit installed in the sedimentation basins upper level powers the flight transfer chain. which removes any sludge accumulated within basinEasiest assembly and disassemblyAutomatic operation creates economic benefits . Superior Physical Property of Lowest Wear. Little ShrinkMost Highest Tensile Strength Of Main ChainGuaranteed tensil strength is 4.000Kg ( Pintle type )/1.000Kg(Loop type)Lowest Power Consumption Other Information | Equipment |
| 1032 | Nonmetal water gate | Nonmetal water gate | Ever Tec Co., Ltd. | http://www.evertec.kr | 1. Outline - It replaces the doorplate and doorframe manufactured by cast iron or bronze with nonmetal material HDPE (high density polyethylene) - It is applied to the waterway of the circular pipe or quadrangle type and the opening is manufactured from 150mm to 2.000mm. 2. Introduction 3. Characteristics - Corrosion proof to sewage. wastewater and sea water - Light weight and easy construction - Excellent water tightness and small amount of water leak - Easy operation due to the low friction when opening and closing - Economical price 4. Application - Sewage pipe line - Rainwater pipe line - Water-collecting line - Irrigation water line |
Equipment |
| 1033 | Non-Motorized Mixer | Non-Motorized Mixer | Dongbang Innotek Co., Ltd. | http://www.dbcl2.co.kr/ | 1. Outline - This Non-Motorized Mixer employs a system that slows down the velocity of fluids by installing a channel mixer inside a pipe of the Non-Motorized Mixer and shows a maximum mixing rate in a short distance after the injection of chemicals. Chemicals stored in a storage tank is injected through an infusion pump when fluids flow inside the pump. Chemicals are first mixed through a pre-dispersion mixer before they are injected into a main pipe and then the chemicals are blended through a contractor mixer. 2. Introduction 3. Characteristics - This Mixer requires a less installation space and convenient installation for it is possible. - This Mixer can be used without being affected by the size and standard of a pipe. - This Mixer can set up an injection amount of chemicals and an accurate measurement value which a user wants. - The work period is short and this Mixer can quickly respond to volume changes. - This Mixer is a high efficiency chemical mixing system and operating expenses are very low due to reduction of use chemicals. - Low initial installation and maintenance cost and convenient maintenance and management. 4. Application - Non-Motorized Mixer |
Equipment |
| 1034 | Non-point pollution source treatment apparatus(HIS) | Non-point pollution source treatment apparatus(HIS) | Next Generations Technologies | http://www.ngst.co.kr/ | 1. Outline This non-point pollution source treatment apparatus (IHS) is capable of treating all kinds of solid matters within short retention time efficiently and allows centrifugation. screening. static precipitation and filtration to be made in one reaction tank. The apparatus can be installed as a non-point source control unit. pre-treatment of wastewater. rainwater utilization. rainwater storage or pre-treatment of a rainwater pump station. 2. Introduction 3. Characteristics -This non-point pollution source is removed by friction and cyclone through a centrifugal force - Velocity of flow reduces sharply as rotational velocity of flow passes in a direction of a screen tangent line - Static precipitation is possible in a screen and gravitational precipitation - Particles that are not removed is removed through filtration as they pass a removable carrier with less head loss which increases removal efficiency 4. Application - Non-point pollution source treatment |
Equipment |
| 1035 | Nonpoint Pollution Source Treatment Facility | Nonpoint Pollution Source Treatment Facility | Egen Co., Ltd. | http://www.iegen.co.kr | 1. Outline Submerged type membrane separation polluted/waste water treatment system has hollow fiber membrane frame submerged directly into the aeration tank of existing processes to control unspecific emission sources that are discharging water contamination substances in the city. road. farming land. mountainous district. and construction site. 2. Introduction 3. Characteristics - Artificially and naturally - Emission point is unspecified and uncertain - Discharged into wide area after dilution and diffusion - Difficult to forecast the emission amount by the natural factors such as rainfall - Difficult to collect and treatment efficiency is not constant 4. Application - City and industrial site - Recreational facility and golf curse - Road and large parking lot - Bridge. industrial complex |
Equipment |
| 1036 | Nonpoint Pollution Treatment System | WEMS Inc. | http://www.nwater.co.kr | 1. Outline • This unpowered first flush treatment system was developed to remove soil and dissolved materials during first flush by holding the first flush spilled from the highland agriculture region. • A precipitation/filtration treatment system is separated structurally to prevent the blockage of filter beds caused by existing soil and to treat pollutions stably and efficiently. • The removal principle of nonpoint pollutants is to remove soil and floating materials in settling ponds because of gravitational deposition. and dissolved pollutants through oxidation. absorption. and filtration by a biofilm in a slow filtration bed and porous media. 2. Introduction 14Biz-166.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-166.JPG'>3. Characteristics • A high-efficiency first flush treatment system that uses a biofilm and a slow filtration bed • Efficiently removes nondegradable materials. such as granular materials. agricultural pesticides. and heavy metals • Continuous availability of microbes • Easy maintenance and treatment • Excellent economic feasibility 4. Application • Possible application in highland agricultural regions |
Equipment | |
| 1037 | Non-stirred Autoclave System | Non-stirred Autoclave System | Ilshin Autoclave Co., Ltd. | http://suflux.com/EN/index.html | Product Description Our non-stirred autoclaves are designed and manufactured to meet the ASME Pressure Vessel Code and we. Ilshin Autoclave Co. Ltd.. provide wide range of products. not only general model. for client's requirement and convenience. We strongly support and give answers in any type of questions. even for materials specifications. size and connection types that is not familiar with you. | Equipment |
| 1038 | Nonstop Concentration Centrifugal Dehydrator | Cheonbo Engineering Co., Ltd | http://www.cheonbo.co.kr/ | 1. Outline - Next generation spearhead dehydration system that concentrates and dehydrates low concentration sludge in high efficiency by single process in various sewage/waste water treatment plants 2. Introduction 3. Characteristics ① Drastic process improvement by single processing of two concentration and dehydration processes - Save additional facility expenses of civil engineering &construction. transfer pump. piping. etc. as storage tank of concentrated sludge is not required - Minimize the installation space as of single process - Improve the maintenance convenience and efficiency by single process - Minimize the power consumption of sludge treatment process and improve the process drastically ② Comparison with conventional dehydration processes - Sludge treatment process of conventional systems - Sludge treatment process of nonstop concentration centrifugal dehydrator ③ Comparison with conventional dehydration process ④ Save the energy expenses and chemical costs 4. Application - Direct dehydration of advanced treatment low concentration excessive sludge in sewage treatment plant - Performance (moisture content) improvement of conventional centrifugal dehydrator - Direct dehydration of wastewater in food treatment plant |
Equipment | |
| 1039 | Non-Stop Thickener | Non-Stop Thickener | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - Non-Stop Thickener is an advanced. high-performance thickener that has unified a coagulation process and a thickening process and has improved thickening performance and this Thickener is also an advanced technology product that does not require a cleansing and features superior thickening function. 2. Introduction 3. Characteristics - Innovative technology that enables simultaneous performance of both a coagulation process and a thickening process - Thickening device that suits best for general guidelines for installation work of the sewer system - Significant process and performance improvement effects when this Thickener is used in connection with a decanter - Excellent thickening performance and economical as this Thickener is compact and low-priced - Energy-saving device that requires very little energy consumption - Very excellent cleaning performance thanks to self-purification by a spinning cleaning pin - Removal effect of dissolved phosphorus in using iron salt as an option 4. Application - Replacement of a gravity thickening basin to the machinery thickening equipment - Thickening device for improving the performance of a digestion tank - Pretreatment device for various dehydrators - Places where high performance thickening is required |
Equipment |
| 1040 | NON-STOP THICKENING DECANTER | NON-STOP THICKENING DECANTER | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline NON-STOP THICKENING DECANTER is an advanced. next generation device that thickens and dehydrates low density sludge in a single process with high efficiency in all types of sewage and wastewater treatment plants. 2. Introduction 3. Characteristics - Significant process improvement by unifying a binary thickening process and a dehydration process into a single one ㆍSaving construction cost of accessory equipment including engineering and construction. transfer pumps. pumping and so on as this product does not require a sludge thickening basin ㆍRequiring less installation space thanks to the unified single process ㆍImprovement in convenience for maintenance and efficiency thanks to the unified single process ㆍMinimizing the power consumption of a sludge treatment process and an innovative process improvement - Saving energy costs and chemical cost 4. Application - Direct dehydration of the remaining. low-density sludge for advanced treatment of a sewage treatment plant - Improvement in performance (percentage of water content) of an existing Screw Decanter - Direct dehydration of liquid waste in a food waste treatment plant |
Equipment |
| 1041 | NOx Analyzer | NOx Analyzer | Dongan Information Industry Co., Ltd. | http://www.dong-an.co.kr | 1.Outline Methods for measuring nitrogen oxide (NOx) in the air are classified into Saltzman measurement. chemiluminescent measurement. and so on. The Nox analyzer is embodied with the chemiluminescent measurement. In more detail. using the principles that the chemiluminescent strength generated when nitric oxide (NO) and ozone (O3) in sample gas react to produce nitrogen dioxide (NO2) is proportional to the concentration of nitric oxide (NO). the concentration of NOx in the air is continuously measured. 2. Introduction(See table 1) 3. Characteristics(See table 2. 3) 4. Application Measurement of the concentration of nitrogen oxide (NOx) in the air | Equipment |
| 1042 | NPR process | NPR process | Kolon Environmental Service | http://www.kolon-kesco.com/ | 1. Outline - An NPR technology is an environmentally friendly technology that removes nitrogen and phosphorus. main culprits of water pollution. This NPR technology is an advanced wastewater treatment technology that is easy to maintain and construct and it is applicable without requiring an additional site. 2. Introduction 3. Characteristics - Correcting and supplementing the established A20 process reflecting the conditions of wastewater in Korea - Maximizing nitrification rate by filling BioCube in an aerobic tank - Shortening residence time - Hybrid Type process that makes good use of merits of a suspended growth process and an attached growth process 4. Application - Water treatment |
Technology & Process |
| 1043 | Nueco Ventilation System | Aikang Remetech | http://www.akrmt.co.kr | 1. Outline • It is a forced airing ventilation system that adjusts temperature and humidity. discharges polluted air. and absorbs the fresh air outside to maintain pleasant air in offices and houses. • Eco-friendly and hygienic pp (polypropylene) products 2. Introduction 14Biz-439_Nueco_Ventilation_System.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-439_Nueco_Ventilation_System.jpg'>3. Characteristics • Easy handling and transportation due to its light weight • It won’t be easily sag because of the reinforcement of its rigidity • Diverse duct standards and fast construction speed • Minimize the interference with sprinkler pipes and refrigerant pipes • Easy cleaning of the inside of the duct • Good bending and ductility • Easy construction compared with the spiral duct and square duct because it does not have joints |
Technology & Process | |
| 1044 | O3 Analyzer | O3 Analyzer | Dongan Information Industry Co., Ltd | http://www.dong-an.co.kr | Ultraviolet absorption ozone analyzer 1. Outline The measurement of the concentration of ozone is carried out by analyzing an amount of absorption of an optical source having wavelength 254nm of ultraviolet rays through ozone. The optical source is mainly used with a mercury lamp having wavelength 254nm. It is projected through a glass tube into which sample gas and ozone-less gas flow in turn. With the ratio of the strength of light between the two kinds of gas. the concentration of ozone is calculated. 2. Introduction(table 1) <Table 1> 3. Characteristics(See table 2.3) 4. Application Measurement of the concentration of ozone in the air | Equipment |
| 1045 | O₃Analyzer | 4300 | Dongan Information Industrial Co., Ltd. | http://www.dong-an.co.kr | 1. Outline The measurement of the concentration of ozone is carried out by analyzing an amount of absorption of an optical source having wavelength 254nm of ultraviolet rays through ozone. The optical source is mainly used with a mercury lamp having wavelength 254nm. It is projected through a glass tube into which sample gas and ozone-less gas flow in turn. With the ratio of the strength of light between the two kinds of gas. the concentration of ozone is calculated. 2. Introduction - Metering items : O₃ - Method : U.V. Photometry (UV absorption method) - Range : 0~500. 0~1000ppb (Selectable Range) - Noise : 0.25ppb - Lower Detectable Limit : 0.05ppb - Zero Drift : within 0.1ppb/day - Span Drift : within ±0.5%/day - Response Time(95%) : within 20sec - Linearity : within ± 1ppb or 1% - Precision : within 1ppb - Analog output : 0~10V. 0~5V. 0~1V. 0~100mV or 4~20mA 3. Characteristics - 80186 16bit Microprocessor Controller - Customer-orinted simple control - Diagnosis during the operation with set-up - Self-diagnosis function - Prevention of memory loss - ppb. ppm. ug/m³ (Selectable) - Manual & automatic zero/slope value - Compensation of termperature. pressure - Electronic metering& indication of flow. pressure. and temperature - Customer-oriented software (changeable) - Compensation of analog ouput - Indication of warning message - Provision of various screen information through the application of graphic LCD 4. Application - Measurement of the concentration of ozone in the air. | Equipment |
| 1046 | Odor & Organic Solvent Collector (CT-Series ) | CT-Series | CNA | http://www.cnaplant.com/ | 1. Outline - This Odor & Organic Solvent Collector is a useful product in a process for removing odor and gas which are generated in high concentration in removal of organic solvent odor. gas removal. painting works. cleaning works. forming works. drying works. heat treatment works and so on. 2. Introduction 3. Characteristics - Turbo- Blower ㆍInstalled with a non-vibration. low-noise turbo fan through a high-precision work and an electronic balancing work. ㆍIncreased suction efficiency through minimization of air friction resistance. - Manometer ㆍCheck on the status of dust accumulation in a filter. ㆍCheck on the time of dust removal and the time of filter replacement. - Control Panel ㆍInstalled with a lamp that checks operating conditions - Caster ㆍConvenient moving and installation due to the installation of moving casters. - Filter ㆍUse of granular activated carbon or ACF fabrics which are suitable for site conditions. ㆍLonger life span and maintaining high efficiency through the combination of an activated carbon fiber filter and granular activated carbon. - Activated carbon ㆍActivated carbon produced with ingredients like woods. brown coal. anthracite and coir fiber is an amorphous carbon aggregate that has well-developed micro-pores and has a large internal surface area as micro pores with a size of particles are well formed in the process of activation. 4. Application - Component Processing - Grinding - Rubber Forming - Mixing |
Equipment |
| 1047 | Odor Abatement System | Ventury Tower Scrubber | Yozin Co. Ltd. | http://www.yozin.co.kr | 1. Outline - The first ventury removes odorous gas and dust by creating turbulences at a fast speed and then freezes. absorbs and abates a high temperature of odors arising from a drying facility. The odors. which passed through the ventury at the second tower. interact with cleansing liquid that circulates at a slow speed in the pack layer of the tower occupying an extensive area and then is released into the air. 2. Introduction 3. Characteristics - Abate odor through chemical washing - Achieve high odor removal efficiency through a two-stage odor removal process 4. Application - Forging plants -Combustion flue gas in furnace - Removal of flue gas from a drying facility |
Equipment |
| 1048 | Odor Abatement System | Wet Scrubber | Yeonjin Co. Ltd. | http://www.yozin.co.kr | 1. Outline The product removes odorous elements through liquid chemical cleaning with absorbents. 2. Feature - Use ventury typed special packing which formulates a large contact area and turbulence. - Guarantee a high removal efficiency - Conduct a multiple-stage treatment based on odor concentration and type. 3. Introduction 4. Application - Sewage and waste water treatment facilities - Excretion treatment facilities. waste landfill sites and waste food recycling facilities - Process gas - Other sites giving off various types of odors |
Equipment |
| 1049 | Bio-filter | Bio-filter | ENBION INC. | http://www.enbion.com | 1. Outline Malodor and harmful substances included in the air coming into medium and large size buildings from outside for air conditioning purposes and circulating indoor air are purified using oxidation catalyst at room temperature. The system simultaneously carries out a process of collecting dust/smoke and a process of removing harmful substances (malodor and VOCs). 2. Introduction Bio Server™ is one of the biological methods for treatment of the pollutants in gas. It is an environmentally-friendly treatment method that decomposes pollutants into water. carbon dioxide and harmless salt by the metabolism of the microorganisms fixed onto porous organic and inorganic complex media. 3. Characteristics - Purification in three stages (Pre-filter → Antibacterial electrostatic filter → Catalyst filter) - Dust and harmful substances are simultaneously adsorbed/decomposed using oxidation catalyst at room temperature. - There is no degradation from time since pollutants are fundamentally adsorbed/decomposed. - It is an environment-friendly system that prevents secondary indoor pollution in advance by restricting desorption of adsorbed pollutants. 4. Application - Wastewater disposal plant. wastewater sludge disposal process. sewage treatment plant. livestock wastewater or night soil treatment plant. compost plant. food waste treatment process. - Cigarette manufacturing factory. Food processing factory. feed factory. waste storage and treatment plant. wholesale markets for agricultural and marine products. joint markets. - Paint manufacturing factory. coating factory. petro-chemical manufacturing. refining factory. refinery. gas station. - Car manufacturing. car repairing. rubber manufacturing process. tire manufacturing process. laundry facility. |
Equipment |
| 1050 | Odor and VOCs Removing System | Odor and VOCs Removing System | Jesagi hankook Co. Ltd. | http://www.jesagi.com | 1. Outline Activated molecule. radical. and ozone are generated by the use of high frequency and voltage. and odor ingredient or air with VOCs are transformed into the harmless one and the clean air by the result of the electrons collision and the oxidization. 2. Characteristics - Auto-operation - Treatment Capability - Convenient installation and operation - Compact design - Product Standard Models - Odor and VOCs Removing System 3. Application - Landfill site. excreta treatment. waste treatment. and storage of oil - Victuals Factory. Petrochemistry Factory. Medicine and Hospital. and Textile Dyeing Process - Painting Factory. Semiconductor Factory. Kitchen. and Automobile Factory |
Technology & Process |
| 1051 | Odor Control System | Odor Control System | Dae Yang Hi-Tech Co., Ltd. | http://www.alphawater.co.kr | 1. Outline - A total system that integrates bioengineering and chemical engineering developed to reduce effectively. neutralize and control odors that inevitably occur in industry. 3. Character - Install the optimum machine through the best system concept design on the basis of a thorough analysis of field research data. - Easier maintenance due to the operation of undiluted liquid with an automatic dilution system. - Easy to install. excellent durability and no tiny failure for the machine. - Able to adjust the amount of neutralizing and decomposing liquid with the spray nozzle. 4. Application - Landfill - Various industrial sites - Livestock and fish handling areas |
Technology & Process |
| 1052 | AWMS-2000 | ACEN Co., Ltd. | www.e-acen.com |
1. PRODUCT DESIGN & CHARACTERISTIC
- AWMS-2000 is a monitoring system that utilizes a built-in substance analyzer
- Built-in sensor and analyzer are capable of 24 hrs monitoring and analyzing operation
- Applicable for the simultaneous field monitoring and control of major odor causing substances
- Provides real time measurement of the odor source and more detailed information
2. PERFORMANCE OF RANGE
- Connection: Cable / CDMA wireless communication
- Screen size: 8 Touch operating type(Tablet PC)
- Temperature operation range: -20℃ ~ 65℃
- Dimensions (W×H×D): 630×1.700×550 mm
3. STRONG POINT
- Real time measurement of both digital sensor and analyzer provides more accurate results
- CDMA remote communication service allows real time automated data collections and notifications
- Able to collect and record meteorologic data
- Integrated data analysis & management through smart phone
● Please refer to the following link for the more details:
|
Air Treatment | |
| 1053 | Odor Removal Technology | Odor Removal Technology | Dongyang ENG & Entis Co., Ltd. | http://watersos.co.kr | 1. Outline - Remove over 90% of all malodor generated from organic materials. - No chemical. environment-friendly natural product. - Persistent odor removal effect. 2. Introduction - Directions 1. Organic Materials: Spray 1-2% diluted microorganism around the pollutant-spilled site. In order to eliminate malodor in the air. apply dilution ratio of 1000ppm for the first use. Reduce the ratio by 50% in every other use depending on the improvement of odor. 2. Livestock Night Soil: Apply the dilution ratio of 1% for the first use. Spray the diluted microorganism at and around the pollution source. Dilute microorganism to the night soil with ratio of 5ppm in the total amount of livestock excretion. Reduce the ratio afterward depending on the improvement of odor. (Aeration required) 3. Wastewater Treatment: Abide by daily use amount of 1 to 5ppm in the total treatment volume. 3. Character - Nature-born native microorganism. - Preservation period: over 10 years. - Spore microorganism. - The microorganism eliminates malodor and disposes harmless by-products such as CO2 and H2O. - Can survive in seawater and salt water and in the acidity of pH 4.5 to 11.5. - Can Survive inside of the spore in water with low dissolved oxygen (DO). 4. Application - Malodor removal technology |
Technology & Process |
| 1054 | Odor Removal Technology | Odor Removal Technology | DONGYANG ENG & ENTIS INC | http://watersos.co.kr | 1. Outline • Removes 90% or more of odor caused by organic materials • An eco-friendly natural product • Lasting odor removal effect 2. Introduction 14Biz-155.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-155.JPG'>3. Characteristics • Contains natural microbes • Product retention period: 10 years or more • Spore-type microbes • Removes odor caused by microbes and excretes harmless by-products. such as CO2 and H2O. • Can be used in severe environment (seawater/saltwater or at a pH level of 4.5–11.5). • Activates microbes at low dissolved oxygen level (microbes do not die during the anaerobic state and survive in a spore). • Harmonizes and coexists with other types of microbes. • An effective microbe product for the ecosystem • 100% eco-friendly product • Scrubber - A series of process to dissolve the soluble components of gas in liquid when gas comes into contact with liquid; a device that aims at “deodorization by gas absorption” - Used for various purposes. such as distillation and dust and droplet removal. aside from gas absorption; collects dust and treats odor and harmful gas at the same time (water is used mainly as a cleaning solution. but a solvent is used depending on the solubility of materials) 4. Application • Source of odor. such as livestock excreta. wastewater. and others |
Technology & Process |
| 1055 | Odor removing agent | Green bio odor resolving and removing agent | Green River Co., Ltd. | http://www.green-river.co.kr | 1. Outline [Green bio] product manufactured and sold by Green River is a product using organism resolving property of microorganism(cellulose resolution. protein resolution. fat resolution. odor resolution). As raw materials. this product uses only bacterium. which are separated from soil and various populations in Korea and are the most effective and profitable in consideration of various activities. This product is cultivated and liquefied in pure liquid using the spearhead production facilities. and is an environmentally friendly product. which does not cause pollution on human beings. environments. air and water. 2. Introduction(See table 1) 3. Characteristics Green-Bio can minimize odor by a rapid resolution. and completely resolve and remove remaining organisms. It has a wide temperature range. chemical-resistant and alkaline-resistant properties. and is easy to maintain and use. 4. Application It is a product for industrial wastewater. and used to remove phenol. flock. pulp. chemical wastewater. oil. and so on. | Operating Agents |
| 1056 | Odor treatment device | KDF Unit | Ceracomb Co., Ltd. | http://www.ceracomb.com | 1. Outline - KDF Unit absorbs cooking smells. oil or other odors. and removes and decomposes through catalyst decomposition by connecting and installing at exhaust duct lines in restaurants. hospitals. food process plants. sewage treatment facilities. and purification facilities 2. Introduction 3. Characteristics - Strong deodorization: Ceramic filter mainly made of high performance absorbent with large capacity and room temperature catalyst - Long durability & low operation cost: Absorb and remove odors for intoxication component. and maintain high activity for a long time through catalyst decomposition - Low pressure drop: Provide wide surface area using honeycomb shape. Unit pressure drop is below 50mmH2O under standardized operating conditions. (3-layer filter arrangement) - Do not need other utilities: Do not need additional power or heat sources other than existing exhaust blower by applying honeycomb filters - Nonflammable: Filters use nonflammable material. No danger of combustion due to fire from ducts as filters can extinguish fire despite leakage of gases containing certain amount of oil. - Can be reused through recycling: Able to recover used filters at the company if deodorization functions drop due to long term use 4. Application - Reduce and remove odors from restaurants. hospitals. food processing plants. sewage treatment facilities and septic tank facilities |
Technology & Process |
| 1057 | Odor Treatment Facility – Treatment by Absorption | Treatment by Absorption | Gana Environment Engineering Co., Ltd. | http://www.gana1.co.kr | 1. Outline As the ozone concentration in the air is increasing above the allowable value by the combination of organic substances and nitric oxide. such as VOC. against recent reinforcement of its control. the VOC removal equipment by activated carbon is used widely gradually. Gana A/C tower has been adopted with the most adequate activation material through the analysis of gaseous contamination substances with the research of activated carbon for years. which has been applied after finding out effective and efficient design of pore distribution ratio and pore structure. 2. Introduction 3. Characteristics - Maintenance expense is affordable as of little pressure drop - Designed to remove various air contamination substances simultaneously in addition to gaseous contamination substances and odor - Performing the stable absorption efficiency against gas flow variation - Possible to operate in the winter season with various freezing preventing measures 4. Application - VOCs generating business sites - Wastewater treatment plant. excreta treatment plant. and odor generating business sites - Tannery: Protein hydrolysates. oil hydrolysates - Livestock farming plant. Food industry: Protein hydrolysates. oil hydrolysates - Incense/oil factory: Oil hydrolysates. solvent. plasticizer - Petrochemical: Carbohydrate. halogen. sulfurous acid gas. hydrogen sulfide. etc. - Rubber factory: Hydrogen sulfide. organic sulfates. solvent - Paint factory: Paint solvent in the painting factory. plasticizer - Printing shop: Printing ink solvent - Chemical/textile factory: Chemical/textile solvent - Plastic factory; Plastic raw material. solvent. plasticizer paper - Pulp factory: Hydrogen sulfide. sulfurous acid gas. carbon disulfide. mecaptan - Pharmaceutical factory: Solvent. protein hydrolysates. oil hydrolysates - Metal factory: Hydrogen fluoride. hydrochloric acid. cynaropicrin - Cleaning shop: cynaropicrin. hospital disinfectant. decomposition odor. body odor |
Equipment |
| 1058 | Offensive odor treatment system | Offensive odor treatment system | EST Co., Ltd. | http://www.estltd.co.kr | 1. Outline - Conventional technologies can’t remove malodorous gas with high temperature and multi-humidity discharged from waste disposal units by using sorbent only for a long time in a stable way. This technology has better durability and an effect than those conventional technologies by making a UV catalyst and a nano catalyst combined to effectively remove offensive odors. 2. Introduction 3. Characteristics - In an activated carbon absorption process. the performance of impregnated charcoals is better than that of general charcoals (first processing) and filter life of impregnated charcoals are longer than that of general charcoals. - For activated carbon absorption process. best efficiency shows a life of 30 days when a sensory standard is 3. - For a UV room temperature catalyst system. 1 sense or more can’t be confirmed against the same standard with an activated carbon absorption process. - For a UV room temperature catalyst system. life can be extended by at least 6 times compared to existing activated carbon absorption process. 4. Application - Food waste disposal site - Food waste disposal unit - Incineration plant - Treatment of offensive odors - Removal of offensive odors in hospitals. zoos and laboratories. |
Technology & Process |
| 1059 | Oil absorptive agent | GRW5001 oil boom | Green River Co., Ltd | http://www.green-river.co.kr | 1. Outline Absorption of oil on the water surface and prevention of oil diffusion in rivers and seas Use during leakage or escape of oil from factory equipments 2. Introduction This product is to absorb only oil of all kinds. such as various fuels. oils. paints. alcohols. solvents(MEK. MIBK. THF. and so on). and fibers of animals and plants.(See table 1) 3. Characteristics 1) It is three to five times in absorption speed and amount as much as general oil absorptive agents(P.P material). 2) To treat after use. the general products must be incinerated at a high temperature. and thereby. it causes the second pollution due to toxic gases and smoke generated during the incineration. However. this product does not generate toxic gases and smoke during the incineration. and is naturally dissolved if it is buried under the ground. 3) This product can be used as fuel. 4. Application - Factory/industrial fields: raw oil processing facilities. oil refineries. car manufacturing lines. dockyards. machine manufacturing factories. chemical factories. construction companies. general factories. pulp manufacturing companies - Traffic facilities/companies: aircrafts. the Office of Railroads. aircraft companies. transportation companies - Service/other companies: gas stations. hospitals. restaurants. garages. harbor managing company - Environment and safety control companies: Environment protection and wastewater processing companies. safety articles handling companies - Government public agencies : Fire stations. road construction corporations. highway road public corporations. armies - Others : Houses. individuals. groups | Operating Agents |
| 1060 | Oil absorptive agent | GRW5003(Cushion type oil absorptive agent) | Green River Co., Ltd. | http://www.green-river.co.kr | 1. Outline This product absorbs only oil at a place in a factory or a water tank of house. in which oil and water are mixed and gathered. This product absorbs only oil on the water surface of a river or a sea. 2. Introduction This product is to absorb only oil of all kinds. such as various fuels. oils. paints. alcohols. solvents(MEK. MIBK. THF. and so on). and fibers of animals and plants.(See table 1. Attach-1) 3. Characteristics 1) It is three to five times in absorption speed and amount as much as general oil absorptive agents(P.P material). 2) To treat after use. the general products must be incinerated at a high temperature. and thereby. it causes the second pollution due to toxic gases and smoke generated during the incineration. However. this product does not generate toxic gases and smoke during the incineration. and is naturally dissolved if it is buried under the ground. 3) This product can be used as fuel. 4. Application - Factory/industrial fields: raw oil processing facilities. oil refineries. car manufacturing lines. dockyards. machine manufacturing factories. chemical factories. construction companies. general factories. pulp manufacturing companies - Traffic facilities/companies: aircrafts. the Office of Railroads. aircraft companies. transportation companies - Service/other companies: gas stations. hospitals. restaurants. garages. harbor managing company - Environment and safety control companies: Environment protection and wastewater processing companies. safety articles handling companies - Government public agencies : Fire stations. road construction corporations. highway road public corporations. armies - Others : Houses. individuals. groups | Operating Agents |
| 1061 | Oil Degrading Microorganism | Oil Degrading Microorganism | Ecophile Co., Ltd. | http://ecophile.com/eng/main/main.asp | Product Description The oil degrading microorganism is a completely natural and safe liquid blend of naturally occurring and specifically selected microbes formulated to bioremediate all kinds of crude or midifieed petroleum products and paraffin wax. The microbial cultures in the liquid concentrate (or solid concentration) will continue hydrocarbon digestion and enzyme production until every oil contaminations and other related organic wastes are consumed. When using EcoGuard. there is no need to worry about affecting the surrounding environment. Product Feature - For petrochemical use. this contain several types of microbes which can degrade aliphatic and polynuclear aromatic hydrocarbon (PAHs) chemicals. - It contains microflora that survives on hydrocarbon waste substances allowing it to utilize it as a source of carbon. - Being extremely resistant to toxic effects of the chemical pollutant fraction and are able to multiply and metabolize in the presence of certain heavy metals. - Because of the diversity of the microorganisms and proprietary biological enzyme systems. this product is excellent for all types of aliphatic and aromatic hydrocarbon degradation. Product Specification / Models [Model] EcoGuard BTEX : for gasoline & VOC EcoGuard TPH : for diesel. kerosene EcoGuard CRU : for Crude oil EcoGuard LUB : for Lubricant Oil EcoGuard OCN : for ocean coastal area Microbial Count : 2.0 x 109 CFU/ml Application Microorganisms are ideally suited to the task of contaminant degradation because they possess enzymes that allow them to use contaminants as food. Bioaugmentation enhances the performance of indigenous bacteria through the addition of bacterial strains with specific activities. Biological contaminated soil treatment systems rely on microbes to degrade organic material in the biomass. where microbes come in contact with organic material under controlled conditions. Bioaugmentation enhances the ability of indigenous biomass to degrade waste and contaminated soil. Ecophile develops products by selecting strains with catabolic pathways to achieve targeted effects in contaminated soil treatment. Microbes are similarly used for the clean-up and remediation of soil. asphalt. concrete. wood. metal. and equipment that has come in contact with oil. gasoline and grease. | Energy |
| 1062 | Oil Mist Collector | Hy-tech ENG Co., Ltd. | http://www.hy-tech.co.kr | 1. Outline This is the facility that the oil mist in the exhaust gas is taken into the main body. passes through specially fabricated 2 stage eliminators and1 stage demister. and separated into oil and mist selectively. Then. oil is sent to the storage facility and treated mist is exhausted into the air through outlet. It is industrial ventilation equipment applied widely in the facility that is using oil for machining. 2. Introduction 3. Characteristics - High efficiency special eliminator is adopted. - High efficiency demister is adopted. - Specially fabricated chamber is adopted. - Silent operation is possible with specially manufactured blower. - Odor can be generated according to the oil ingredients 4. Application - Metal product industry - Machinery industry - Automobile part industry - Industrial sites where various oil mist is generated |
Equipment | |
| 1063 | Oil Mist Collector(OILCOL-Series) | Wooyang ENG, CO., LTD | It eliminates completely water soluble and non-water soluble mist generated from processing machine parts by 3 kinds of filters. Hepafilter is installed when fume occurs. Features Total Mist Cleaner Excellent collecting of mist of soluble or dissoluble in large quantity. Threefold Structure Threefold filtering system can collect chips. sprayed mist High-efficiency filter Collection of fume as well as mist by 99.97% efficiency by HEPA Filter Centralized collection system Several machines generating mist can be applied. Easy maintenance ㆍSimple replacement of filter ㆍEasy maintenance by collective checkup | Equipment | ||
| 1064 | Oil separator | Sinuous Plate Separator for oily water treatment | Hana Environmental Industry Co., Ltd. | http://www.hana114.co.kr | 1.Outline SPS system (Sinuous Plate Separator). which is a new model (high performance) oil separator. includes a sediment tank. a pre-process tank. an oil separation tank. a filter tank. and a re-separation tank. each of which has an inherent function. 2. Introduction SPS system includes a plurality of wavy plates that are made of F.R.P or P.P materials at predetermined intervals and inclination angles. The mixing water in which oil is contained is passed through numerous wavy SPS packs. whiling gathering fine oil to form large drops. The large drops are floated along the upper corrugations of the SPS packs and removed by pipe skimmer. whereas the sludge is descended along the lower corrugations of the SPS packs and gathers in the sediment section. The principals are applied to develop SPS pack by using Stock's law. which makes use of the specific gravity difference of the mixed water (oil. water. and sludge). thereby removing the problems related to the performance and sludge the existing oil separators have. 3. Characteristics 1) SPN system is provided with especially designed wavy plates that obtain several thousands of partitions effect 2) It is divided into a sediment tank. a pre-process tank. an oil separation tank. a filter tank. and a re-separation tank. exhibiting an excellent removing efficiency in the oil and sludge 3) The oil and sludge in the mixing water are treated through 5 steps. thereby exhibiting a high efficiency of oil separation 4) It is one of best systems that can completely remove the performance and sludge problems the existing oil separators have 5) It is possible to treat insoluble oil 5 ppm or less (possible. in case of flow of 100% of oil) 4. Application Large quantity oil generating places. places where level of water is frequently changed. oil producing plants. engine repair. engine repair. repair plants. ships. petrochemical plants. automobile plants. wastewater treatment places. disused car plants. car washing places. other places using oil. | Equipment |
| 1065 | Oil steam and smoke particle removal ceramic filter | Oil steam and smoke particle removal ceramic filter | Mirae NET Co., Ltd. | http://www.mrnet21.co.kr | 1. Outline - Possible to remove high-density oil steam and miniscule smoke particles of 0.05 - 0.3㎛ that could not be removed previously. Ceramic filter removes the particles amounting to HEPA FILTER that injects air supply in semiconductor factories. - If oil steam is heated and created into steam. it is creates particles about the size of smoke particles not in liquid particle size. So. it must be removed by a filter and collection facility. 2. Introduction 3. Characteristics - Technology with innovative improvements on previous oil steam or smoke particle removing air prevention technology ※ Previous oil steam or smoke particle removing air prevention facilities: - Electric collector. liquid scrubber. activated carbon absorbing tower : Cannot remove oil steam - BAG filter: Partially removes oil steam but cannot use filter for a long period of time 4. Application - For removal of oil steam or smoke particles |
Equipment |
| 1066 | Oil–Water Separation Technology | Oil–Water Separation Technology | GeoMarine | http://geomarine.kr/ | 1. Outline • As the use of oil has been extending. soil contamination has been occurring due to the spill of storage tank and oil pipeline. illegal reclamation. accident. etc. • Oil-contaminated soil appears in a large area due to the fact that it is hard to recognize. Furthermore. its natural purification needs to take a long time. • Restore contaminated soil. separate oil and water. and improve water quality using the characteristics of bubbles. 2. Introduction 14Biz-111.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-111.JPG'>3. Character • The first bubble energy: spontaneous bursting occurs on the water surface and produces energy - The coalescence occurs under water when an external force. such as ultrasonic wave. is applied and considerable energy is produced during this time. • The second bubble energy: floating through buoyancy • Using the energy mentioned above to raise non-precipitated materials. such as alga. etc. in a water treatment process to treat. • It should be enable to deal the size. number. electric potential and fundamental property of bubble so as to improve processing efficiency. • Bubble energy is utilized to restore oil-contaminated soil. • It can separate oil contaminants from soil. through using bubble explosion energy. • Separated oil contaminants can be removed by float through bubble buoyancy. • Remarkably high water treatment efficiency can be obtainable by using bubble explosion energy as well as bubble buoyancy. • The remediation method of oil-contaminated soil for Low-cost. low-energy and high-efficiency 4. Application • Contaminated soil remediation. oil–water separation and lake water quality improvement. |
Technology & Process |
| 1067 | Oil-water separator | Oil-water separating system (TH type) | Isaac Environmental Engineering Co., Ltd. | http://www.isaaceng.co.kr | 1.Outline The product includes the steps of passing oil fine particles distributed in the water through a coalescer filter. making the particles grow to become large particles of 1 ~ 2 mm. and momentarily separates them in differences in density within a filter housing. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000222-2.jpg></center> 3. Characteristics 1) Adoption of a unique micro fiber filter 2) Possible to separate oil and water by circulation a time 3) No oil remaining in the filter 4) Large treating amounts and long life 5) Automatic discharge of the separated oil 6) Compact size 7) Simple operation and maintenance 4. Application Removal of fine oil in the water or fine water particles in the oil | Equipment |
| 1068 | Oily Separation System from Wastewater | Oily Separation System from Wastewater | SD tech Co., Ltd. | http://www.sdtechkorea.com | 1. Outline - The membrane separation method is used to separate particles using a membrane with consistent pore size. The size of emulsion particles is 0.1~10 um. and the pore size is 0.001 um so the emulsion oil is separated by the difference in size. 2. Introduction 2-1. Backgroud - The generation of oily wastewater is increasing fast along with the metal industry and coating industry. and it is very difficult to treat it. - When the oily wastewater is not pretreated and flown into the aeration tank that is a biological process. it causes confusion in the operation of wastewater treatment plant by deterring the growth of microorganisms through chemical toxicity of emulsion oil. 2-2. Process <center><img src=http://www.apec-vc.or.kr/attfile/market_place/img/256.jpg></center> 3. Characteristics - No need of pH control (Operating rage: pH 2~12) - No change in the quality of treated water (Stable) - No need to add chemicals due to physical separation - Reduction of treatment cost for waste oil - Reduction of wastewater (1/10~1/20) - Compact equipment and low cost 3. Application - Wastewater treatment for the middle water of big buildings. and for the car washes that use surfactant. wax. synthetic detergent. etc. | Technology & Process |
| 1069 | Oily Water Separation System | Oil/Water Separator Alpha | WACLE | http://www.wacle.com | 1. Outline Alpha system has inclined coalescing plates of water maze. These oil attracting plates and oil skimmer produce a highly effective removal of oil. grease. SS and BOD. Ozone generator controls turbidity and color of contaminated water. Installation is very simple in small space because of its compact size (2m×1m). It is possible to use as a pre or post treatment to improve the effect of the existing facilities. 2. Introduction 2-1. Process <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000107_1.jpg></center> 2-2. Specification <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000107_2.jpg></center> 3. Characteristics - Installation is very simple in small space because of its compact size (2m×1m). - Maintenance is very easy and it is possible to use the filter semi permanently. - It is possible to use as a pre or post treatment to improve the effect of the existing facilities. - Oil separating capacity: 66.618ppm → down to under 5ppm - Alpha system has inclined coalescing plates of water maze. These oil attracting plates and oil skimmer produce a highly effective removal of oil. grease. SS and BOD. - Ozone generator controls turbidity and color of contaminated water. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000107_3.jpg></center> | Equipment |
| 1070 | Oloid | Oloid | Hanilest Co., Ltd. | http://www.hanilest.com | 1. Outline - Product that dissolute and circulates large amount of oxygen into water of a wide lake in short time - With stirring and circulation action by the stirring device. oxygen in the air is injected into water and leads the purification action by making flow of water 2. Introduction 3. Characteristics - Low energy consumption - Collection of high sludge index by enhancing quality of active sludge - Plants. strings. or textile material doesn’t stick on the device - Installation in all forms of reservoirs is easy - Automatic power supply based on solar cell modules 4. Application - Sewage treatment facilities - Wastewater treatment facilities |
Equipment |
| 1071 | One-eb bio | One-eb bio | One line tech Co., Lte. | http://www.onelinetech.com/ | 1. Outline • Put Bacillus subtilis (Natto. Effective Microorganism) for water purification into the container filled with cement paste and seal it • The concrete products damaging the environment can be transformed to the revival concrete for environmental purification. 2. Introduction 14Biz-20.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-20.jpg'>3. Character • Bacillus subtilis does not generally function without water but once it is exposed to water. it begins to proliferate and purify the water feeding on the pollutants in water. • It applies the biological treatment method. • eb bio bacillus repeats proliferation process every 30 minutes. • Once eb bio bacillus is exposed to water. it proliferates at a great speed and comes out from the small and many holes of the container to decompose the organic matters and to purify water. • In this way. it safely transforms nitrite nitrogen to nitrite oxygen. which is harmless to the environment. 4. Application • Sewage treatment • Water quality improvement • Water treatment system |
Eco-Friendly Products |
| 1072 | One-pass hybrid system | One-pass hybrid system | EST Co., Ltd | http://www.estltd.co.kr | 1. Outline - Fine dust. VOCs and bad smell arising from various construction sites have a negative effect on atmosphere environment and human health so regulations on them are being strengthened all over the world. This One-pass hybrid system can remove those fine dust. VOCs and bad smell arising from various construction sites in the form of one-pass at a time. 2. Introduction 3. Characteristics - Space use can be improved with a reduced size ㆍSite can be saved by 30-35% compared to existing equipment - Initial cost can be reduced. ㆍVOCs are removed in a concentrator and additional introduction of RTO is not required. - Operation & management expenses ㆍRTO operating cost is not required. Operating cost is greatly reduced due to the use of electricity as an energy source. - Operating temperature can be reduced ㆍSafety can be improved as operating temperature decreases to 300˚ from 900˚ 4. Application - Removal of VOCs and bad smell arising from various construction sites - Removal of bad smell from landfills. garbage disposal units and wastewater treatment plants - Removal of harmful gas in semiconductor lines. |
Others |
| 1073 | On-line Electrochemical COD Auto-Measuring Instrument | HACA-2000 | KORBI Co., Ltd. | http://www.korbi.com | 1. Outline - This is a method of applying a certain voltage to a special compound electrode that induces oxidization of organic matters. and indirectly finding out the concentration of the organic matters using the variations in the current’s value. The size of the organic matters’ oxidation reaction originating from the electrodes is proportionate to the concentration level of organic matters. and is indicated as EOD (Electrochemical Oxygen Demand). which is then converted into COD. 2. Introduction 3. Characteristics - Accurate measurement. quick response. quick measurement cycle - Uses degenerated compound materials instead of chemical oxidants for electrochemical oxidation - Convenient for electrode regeneration - No need for distillation instruments and waterworks facilities - Improved durability and convenient to inject samples with built-in line processing device - Capable of 24 hour unmanned automated measurement 4. Application - Monitors discharged water quality of sewage final processing plants and various industrial wastewater treatment centers - Applied in Total Pollution Limitation Policy for the 4 Great Rivers basins and Lake Saemangeum - Promotes obligation of implementing wastewater TMS |
Equipment |
| 1074 | Online Gas Analysis (CEM400) | Online Gas Analysis (CEM400) | Korea ATIK Co., Ltd. | http://atikorea.com | 1. Outline - Wall-Mount Type On-Line Gas Analyzer 2. Introduction 3. Characteristics - High reliability and selectivity of measurement - Optional Heated Circuit Version (190℃) - Multi-Gas Configuration - Automatic compensation of pressure and temperature - CO. CO2. H2O and CH4 - Response speed with one second or less - User-friendly touch-screen environment - Data storage through a USB port - Automatic calibration and sampling system (option) 4. Application - Online Gas Analysis |
Equipment |
| 1075 | Online Ionometer Analyzer | DiaMon TP | BL PROCESS CO., LTD | http://www.blprocess.co.kr | 1. Outline This DiaMon TP oxidizes all phosphorus components in the water into phosphate by 15-minute ultraviolet radiation when samples. sulfuric acid. potassium persulfate. and airs are injected into the device at the temperature of 90℃. Injecting reducing agent after mixing caustic soda and molybdate in the pre-treated sample. and producing blue-colored molybdenum complex salt. the device measures the absorbance within 600~710nm and calculate the concentration of total phosphorus. 2. Introduction 3. Characteristics - Measure multi-waves simultaneously by equipping photodiode array to the detecting element - Use a Xenon flash lamp with high luminosity (luminous efficiency) - High correlation with water analysis. high reproducibility - Use a standard test method. measure the absorbance at the end of the reaction - Analyze samples with various obstacles by multi-wave measurement - Designed with fewer parts and consumables - Stable analysis is available in the long-term using a wide-caliber pipe for samples - Use UV reactor under the atmospheric pressure of 100℃ - Self-calibration - Self-diagnosis - Self-cleaning - Minimize the frequency of sample change due to high stability and little consumption of samples - Extend the changing cycle of consumables - Remote control and diagnosis 4. Application - Sewage and wastewater treatment |
Equipment |
| 1076 | On-line Permanganate COD Auto-Measuring Instrument | HACA-3000 | KORBI Co., Ltd. | http://www.korbi.com | 1. Outline - This instrument measures the amount of oxygen required for oxidizing organic pollutants in the water and transforming them into inorganic oxides and gas. It uses the method of measuring the sample’s organic pollutant level with the oxidant quantity consumed in oxidizing the sample heated with the oxidant. 2. Introduction 3. Characteristics - Adopts 5-port control valve : simplified internal structure / improved measurement accuracy / saves usage of sample agents - Economical compared to previous measuring instruments (decreased usage of sample agents by half) - Improved maintenance convenience on-site through simplification of equipment and decrease in usage of sample agents - Capable of 24H unmanned automated measurement 4. Application - Monitors discharged water quality of sewage final processing plants and various industrial wastewater treatment centers - Applied in Total Pollution Limitation Policy for the 4 Great Rivers basins and Lake Saemangeum - Promotes obligation of implementing wastewater TMS |
Equipment |
| 1077 | Online SRT meter | Online SRT meter | Dream Bios Co., Ltd. | http://www.dreambios.com | 1. Outline - On-Line SRT-meter 2. Introduction 3. Characteristics - Oxygen usage rate measuring method - Built-in excellent panel PC - Measuring factors : OUR. SOUR. pH. temperature. MLSS 4. Application - Measuring the activity of microorganisms - Measuring the decomposition of organic matters for each spot - Measuring the sludge |
Technology & Process |
| 1078 | On-line Total Nitrogen/Total Phosphorus Auto-Measuring Instrument | HATN-2000, HATP-2000 | KORBI Co., Ltd. | http://www.korbi.com | 1. Outline - HATN-2000/ HATP-2000 continuously measures the concentration of total nitrogen/total phosphorus within the water. It is equal to. or more precise than laboratory data. making it widely applicable as continuous auto-measuring and monitoring equipment for drinking water quality management. sewage / wastewater. industrial wastewater. and underground water. 2. Introduction 3. Characteristics - Precise measurement and injection function by digital control - Fixed-quantity feeding device for samples and sample agent by 7 PORT system - Firm and transparent vessel for eye inspection - Improved stability and accuracy through built-in line processing device 4. Application - Monitors treatment process and influx/outflux of wastewater treatment centers - Monitoring system for excretion and livestock wastewater - Monitoring system for industrial wastewater - Monitoring system for water quality of rivers and lakes - Management of Total Water Pollution (TP. to be implemented in 2011) |
Equipment |
| 1079 | On-Line Toxi- Meter | On-Line Toxi- Meter | Dream Bios Co., Ltd. | http://www.dreambios.com | 1. Outline - Protects microorganism within the waste water treatment facility through monitoring of inflow of serious waste water. - Total toxic alarm system with the use of sensor attached to the aeration tank to detect the inflowing water. - Support for rated quantitative and qualitative data evaluation technology - AI-based management technology for automated management and maximization of efficiency. 2. Introduction 3. Characteristics - Measuring of toxicity of inflowing water (OUR.SOUR). pH. temperature and MLSS - Within DO sensor automatic cleaning system - Checks the adaptation of the inflowing water and microorganism - Prevents abnormal action of bio reactor after inflow of toxicity - BY-PASS System according to the top and bottom alarm - Prevents abnormal action of the bio reactor in advance - Measures the load of the organic materials in the in-flow water (high load. low load) - Monitoring of dissolving speed and capability of the inflowing water (evaluation of the toxicity) 4. Application - Bio-activity of returned sludge (Activity) - Toxicity of the inflowing water (Toxicity) |
Equipment |
| 1080 | Online Water Quality Analysis (AnaChem 2000/4000) | Online Water Quality Analysis (AnaChem 2000/4000) | Korea ATIK Co., Ltd. | http://atikorea.com | 1. Outline - AnaChem 2000/4000 is an automatic online densitometer using a neutralization titration method. 2. Introduction 3. Characteristics - Automatic On-Line Densitometer Using a Neutralization Titration Method. - On-Line Auto Titrator: pH. ORP electrode. Standard Addition and Titration. - Advantages - No Sample Filtration - Lab Accuracy - Field Proven Reliability 4. Application - Online Water Quality Analysis |
Equipment |
| 1081 | On-Site Hydrogen Generator | H2 Gen | Elchemtech Co., Ltd. | http://www.elchemtech.com/index.php?module=Default&action=DefaultEng | H2 Gen is On-Site Hydrogen Generator. it produces hydrogen gas at high purity(99.99995%) with only water and electricity. - Performance H2 Gen stack can stand pressure up to 150bars at 99.9% purity. (*purity above 99.99% is optional) - Safety H2 Gen DO NOT use caustics such as KOH or NaOH. There is no need to transport any chemicals tha may be harmful to man. - Eco Friendly H2 Gen only utilizes water and electricity to produce hydrogen. Therefore. no greenhouse gases such as CO2. CO. NOx and SOx are produced. - Compact Design H2 Gen only requires small installation area as it can stand high pressure up to 150 bars and operates under high current density. - Economics H2 Gen system is based on high current density and PEM technology. meaning that it has high efficiency. Operation and Management cost is low compared to other H2 Generators. | Equipment |
| 1082 | Open Channel Flow meter | WTP2000 | Wintek Co., Ltd. | http://www.m-wintec.co.kr | 1. Outline - WTP2000 Float flowmeter is a meter to measure and indicate the flow by detecting the volume that passes through the arbitrary section of Parshall Flume per unit hour as the Float. 2. Introduction0 3. Characteristics - Auto Zero Calibration - Flow Measurable regardless the composition. the density and the temperature of the fluid - Easy installation and maintenance - Usable at the site where the steam is being generated. - Usable at the site where the bubbles are being generated 4. Application - Steel Industry - Hydro Power Plant |
Technology & Process |
| 1083 | Open channel flow meter | FLO200-U | Wessglobal, Inc | http://wessglobal.com | 1. Outline - This FLO 200 open channel flow meter is designed to measure various open channel flows in an accurate and stable manner using a unique supersonic technology of Wessglobal. Inc. It provides various display information that includes numeric. wave. data trend forms while enabling users to apply the meter to various flumes and weirs. In addition. it is designed to let users input flow data of the site when channels do not meet standard requirements. It can be also synchronized with TMS. 2. Introduction 3. Characteristics - Synchronized with TMS - Measures various open channels - Provides pulse and mA output - Applies to various types of channels - Built- in abnormal signal filtering features - Minimizes barriers to installation with acute beam angles (3 degrees) - Designed to be immune to noise through electrical isolation 4. Application - Open channel flow meter measurement |
Equipment |
| 1084 | Open Channel Flow Meter | Parshall•Weir Flow Meter WTP2000 (Float) | Wintec Co.,Ltd. | www.m-wintec.co.kr | 1. Outline - This WTP 2000 Float Flow Meter is a flow meter measuring and displaying fluid volume that passes through a certain cross section of Parshall Flume in unit time by detecting the volume via a float. 2. Introduction 3. Characteristics - Various Output Interface • Analog: DC 4 ~ 20mA • Pulse: Open Collector Pulse • Digital: RS 232C. RS422 / RS485 (Option) - Water-Quality TMS Standard Protocol - Graphic LCD with Backlight. Menu in Korean Language - Auto Zero Calibration - Measurement regardless of components. density and temperature of a fluid. - This product features convenient installation and maintenance management. - This product can be used in a site where water vapor occurs. - This product can be used in a site where bubbles occur. 4. Application - Flow Rate Measurement |
Equipment |
| 1085 | Open Channel Flow Meter | Open Channel Flow Meter | Pulbit Engineering & Control. | http://www.pulbitenc.com | 1. Outline - Flow meter measures by using a portable device. instantaneous pointing values and one week’s integrating values can be read wirelessly and printed out. A wireless reading portable device is used for business management. personal schedule management. wireless internet service. and other services. The built-in high performance CPU allows for advanced functions. minimum failure rates. and low cost. 2. Introduction - By using a portable device. instantaneous pointing values and one week’s integrating values can be read wirelessly and printed out. - A wireless reading portable device is used for business management. personal schedule management. wireless internet service. and other services. - The built-in high performance CPU allows for advanced functions. minimum failure rates. and low cost. - Function of measurement: displaying instantaneous flows per hour. instantaneous water levels. total integrating flows. power input hour. and instantaneous flow. 4. Application - Flow meter |
Equipment |
| 1086 | Open channel flow meter | An open channel flow meter | Pulbit Engineering & Control | http://www.pulbitenc.com | 1. Outline - Open channel flow meter has replay output function. When it is doing zero adjustment. AUTO Calibration can be done with simple key typing. When it is performing analog output. especially in 4~20mA output. the output signal modification can be done by the program. 2. Introduction 3. Character - Replay output function. - Control system of high and low levels and integration flux. - When doing zero adjustment. AUTO Calibration can be done with simple key typing. - When performing analog output. especially in 4~20mA output. the output signal modification can be done by the program. - 40 Character LCD Display provides complete checking of integration flux values and total time without additional key stroke. - In case of Plus Output. the open collector type is set as an initial setup. - Can measure all liquid which has over 5us/cm electrical conductivity. 4. Application - Flow meter. |
Equipment |
| 1087 | Operation bridge type sludge collection system | Sludge collection system | Cheonbo Engineering Co., Ltd. | http://www.cheonbo.co.kr | 1. Outline This is a collector of sludge using scrapper installed on the railway bogie in the rectangular settling pond. It is a 2 water pipe and 1 operating. 2 way operation collection system which is pulled by wire-rope. 2. Introduction - Type : underwater traveling bridge-type - Traveling speed : 0.2 ~ 0.6 M/MIN - Waterway length : 30 ~ 60 M - Power rate required : 1.5 ~ 2.2 Kw 3. Characteristics 1) Possible to operate irrespective of winter time freezing of water surface 2) Easy installation under the existing inclined plane settling pond 3) Simple structure and small area for top end of setting pond 4. Application Sewage and wastewater treatment site | Equipment |
| 1088 | Organic sludge recycling project (RDF) | Organic sludge recycling project (RDF) | Shingang Hi-Tech Co.Ltd. | http://www.sgenv.kr/ | 1. Outline This organic sludge resource project (RDF) is a refuse derived fuel (RDF) technology that adds adjuvant to use potential calories of organic sludge or changes it into fuel through a drying process by keeping pace with efficient use of organic sludge by installing an energy resource recovery facility which accords with the government policy. 2. Introduction 3. Characteristics - Recirculation of dried exhaust gas and minimization of discharge - Perfect stench treatment system - Safe measure against fire. dust and explosion - Substitute crude oil - Reduction of greenhouse gas - Reduction of cost required to treat organic wastes - Job creation 4. Application - Recycling of wastes |
Technology & Process |
| 1089 | Organic solid matter pretreatment apparatus (Powermax) | Organic solid matter pretreatment apparatus (Powermax) | Next Generations Technologies | http://www.ngst.co.kr/ | 1. Outline In the organic solid matter pretreatment apparatus (Powermax). solid matters and sludge that are injected in a direction of the tangent line of outer shells through a pump move along space in cylinder generating eddy flow at a high speed and at the moment strong shear generates by a frictional force between fluids or fluids and inner shells and solid matters are atomized and microorganisms become soluble by the destruction of cell membranes due to collision and shear of solid matters and microorganism sludge. Cavitation are generated when solid matters and sludge pass the inner shells and when cavitation bubbles collapse. they become decomposed. oxidized and shredded by high temperature (about 5.000 ℃). high pressure(water Gpa) and radical that are generated in the surrounding area which changes property of solid matters and if an orifice type cavitation device is installed in the latter part. solubility can be prompted. The organic solid matter pretreatment apparatus (Powermax) has a simple structure and multi-functions. 2. Introduction 3. Characteristics - Useful to solve environmental problems such as marine pollution caused by dumping wastes onto the sea. air pollution caused by incineration and groundwater pollution caused by leachate in the case of landfills - Applicable to various fields - Create energy by making sludge reduced and available at low cost - Economical because cost required to maintain a facility is low as the apparatus (Powermax) has a simple structure and multi-functions 4. Application - Micro-bubble generation and flotation treatment |
Equipment |
| 1090 | Organic solvent returning equipment | VPSR 200 (Organic solvent returning system) | Vacuum Plant Co., Ltd. | http://www.vacuumplant.co.kr | 1.Outline The product is developed to distill and recycle waste cleaning oil used in the whole industrial fields of machinery. electronics and semiconductor in safe. economical manner and to return the waste cleaning oil to the original purity. such that the waste cleaning oil is completely separated from the pollutants and various solids mixed therein. 2. Introduction 1) Distillatory solvent: Hydro carbon cleaning solvent 2) Distilling capacity: 200 L/HR 3) Power: 3 Φ 60 Hz 4) Electric capacity: Heater - 20 KW. Circulating pump - 2.2 KW. Oil pump - 1.5 KW 5) Amount of cooling water used: (L/MIN) 40 L/MIN (15 ℃ or less) 3. Characteristics 1) Possible to use either steam or electric heater as an available heating source 2) No necessity of a supply pump upon the application of waste liquid (to a regenerator) - vacuum suction conveyance 3) Large foreign materials in the waste solvent - first filtering 4) Primarily indirect contact with the steam in the pre-heater upon the supply of waste solvent to cause a temperature to be raised - reduction of energy 5) Kept at a predetermined level of water when the waste solvent is distilled in a vacuum evaporator - automatic control of the level 6) Possible to convey purified pure solvent by means of a regenerating tank or a scrubber. without any separate pump (in case where the conveying distance is relatively far. there is a need for a separate pump) 7) Safe operation of three-stage (cooling. distillation temperature. and heating temperature) - Setting of interlock at respective points of the solvents harmful to human bodies while processed in the vacuum state. 8) Arbitrary variation of desired temperature - Possible to adjust each 1 C for the purpose of accurately heating up to desired temperature. 9) Materials - The portion being contact with the solvent is made of 100% of stainless steel. - The cover is formed of SS 41 and powder paint. - Other materials are made of SS 41. 10) The operation types are used in both of continuous type and batch type. 4. Application Places where cleaning oil is used such as the fields of machinery. electronics and semiconductor industries. Kinds of recyclable solvents (See table 1) |
Equipment |
| 1091 | Organic wastewater treatment | VEC | YOUIL ENSYS CO., LTD. | http://www.youil.com | 1. Outline VEC system evaporates liquid at low temperature by maintaining vacuum condition by boiling separation of water. 2. Introduction In VEC system for evaporating liquid at low temperature by maintaining vacuum condition by boiling separation of water. the liquid within this system could be evaporated. concentrated. and then condensed at the same time that is characterized by compact. Also when it evaporates. it withdraws all latent heat and sensible heat to reuse as a heat source for vapor to save power. The condensation liquid applies to a sewage disposal plant as a organic carbon source. 3. Characteristics 1) Purify high concentration of organic wastewater step by step 2) Extract organic carbon source only after remove high concentration nitrogen in leachate of food waste without nitrification and denitrification progress. 3) Can use the advanced treatment processes directly after the pH level settles. due to the low concentration. which is condensation water total solid concentration of 10 ppm. 4) Replace methanol and acetic acid etc. at a competitive price. and 5) Easy maintenance and management (auto operation) 4. Applications 1) Sewage treatment plant 2) Various sewage and wastewater treatment plants | Equipment |
| 1092 | Organic wastewater treatment system | System for treating organic wastewater by organic oxidation | ENSERVE Co., Ltd. | http://www. enserve.co.kr/ | 1. Outline This system is a digester. which is a preprocessing system for high-concentrated organic wastewater treatment. is very effective and has a compact form of not the conventional digester type but an UASB type. This system requires a considerable volume to treat the high-concentrated introduced wastewater as active slurry. or is easy to organically oxidize generated wastewater. and is good to wastewater discharged in an alcoholic state. Moreover. this system is to separate organic pollutant matters to water. carbon dioxide. and methane gas using methane-producing bacteria (anaerobic bacteria) after the organic oxidation of the introduced organic wastewater. 2. Introduction (see fig. 1.2) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000295-2.jpg></center> <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000295-3.jpg></center> 3. Characteristics (1) It is suitable for high-concentrated organic wastewater treatment (BOD5 : 3.000 ㎎/ℓ or more). (2) It saves energy due to generation of methane gas(30% of introduced matters). (3) It requires a small necessary site in comparison with active slurry (30~40%). (4) It reduces chemical costs and waste matter treatment costs as a sludge producing rate is low (10%). 4. Application (1) High-concentrated organic wastewater generating factories (2) Chemical composition factories (companies that mainly discharge alcohol) | Equipment |
| 1093 | Organic wastewater treatment system | Organic wastewater treatment system | Ecodays Co., Ltd. | http://www.ecodays.co.kr | 1. Outline - Organic wastewater treatment system 2. Introduction 3. Application - Wastewater treatment system |
Technology & Process |
| 1094 | Orica MIEX Resins | Orica MIEX Resins | Sambo Scientific Co.Ltd. | http://www.sambosc.com | 1. Outline This MIEX DOC Resin has been produced to remove DOC in tap water. DOC which is charged with negative when it comes into contact with water is exchanged with a chloride ion that is located activated part of resin surface and then removed. As a result. a DOC level decreases and a chloride ion level in treated water increases to a certain degree (2~4mg/L). Resin that is combined with DOC has a reverse ion exchange reaction in reproduction process and chloride ion is substituted in a place of DOC which is dissociated from resin NaCl solution. MIEX DOC Resin has been developed to be used for a continuous water treatment process. MIEX DOC Resin has optimized a size. DOC exchange characteristics. wear resistance and magnetism which are suitable for continuous water treatment process. 2. Introduction 3. Characteristics - Cost that is required to remove DOC is low. - Generation of disinfection by-products decreases remarkably. - Chromaticity decreases. - Flexible continuous process which is adjustable according to raw water quality. - An input of coagulants and a volume of chemical sludge decrease remarkably. - Chlorine demand that is required for disinfection decreases. 4. Application - Continuous water treatment process |
Technology & Process |
| 1095 | ORWAK OW-SERIES | SH Entech Co.,Ltd. | http://www.shen-tech.kr/ | 1. Outline - 5070HD is Top Loading Multi Chamber compressor. which classify and compress papers. vinyl and waste 2. Introduction 3. Characteristics ① OW-3200 It is useful for treating waste for general industries over 300kg/hr in processing capacity. It is compact size that it is easy to install and has enough compression power with compressive force. 12 tons. ② OW-330 The height of machine is less than 2M with X shaped cylinder. It can be installed in the area with low ceiling and has simple operation with digital Control Panel ③ It is typical compressor. which compresses recycling products and burning up wastes after sorting by kinds of materials. It connects with Chamber and is easy to put garbage with Top loading method. 4. Application - Classify and compress papers. vinyl and waste |
Equipment | |
| 1096 | Oxidation Deodorizing Facility | Oxidation Deodorizing Facility | Changsin E&P Inc. | http://www.csplant.co.kr/ | 1. Outline • A method used for oxidizing and burning unpleasant odors. It uses flames at extreme temperatures of the noxious substance. 2. Introduction 14Biz-88.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-88.JPG'>3. Character • Direct Combustion - It is a method used to deodorize unpleasant smells and remove volatile organic compounds (VOC) by burning gas that contains the noxious substance. The method uses direct flames at 600–800°C. The contact time is 0.3–0.5 seconds and it does not cause degradation even when used for a long time. - It has small pressure loss and it requires minimal maintenance. It is used to deodorize facilities for smoked meat. fat rendering. varnish heating. and blood drying. • Catalytic Combustion - It is a method used to oxidize gas that contains noxious substance using catalysts. such as platinum. palladium. or metallic oxides (Cr. Mn. Cu. and Ni). at a low temperature of about 250–450°C. - It can decrease up to hundreds of degrees compared to direct combustion and installation space. • Regenerative Thermal Oxidation (RTO) - Gases and ceramics can exchange and recover heat by about 80–90%. This method thus has low operational costs (auxiliary heater). 4. Application • Deodorizing facilities • Air pollution prevention facilities • Air pollution control facilities • Dust collecting facilities • VOC removal and oxidation treatment facilities |
Equipment |
| 1097 | Oxidation Flushing Type | Oxidation Flushing Type | MAT | http://www.mat.co.kr/ | <h2 class=prod_h2><span class=h2Top>Oxidation Flushing Type</span><br /> MAT507BW </h2> <div class=prodInfo> <ul class=smell01List> <li>Thermal-Wet system with compact design</li> <li>Redundant Heating System with high performance</li> <li>Good solubility with long gas path design for wet chamber down-up<br />gas flow </li> <li>Burn/Wet chamber easy separation device</li> <li>Easy Operation and Maintenance with PM & Cleaning</li> <li>Automatic PLC control with Touch screen</li> <li>Certified CE Mark. “S” Mark. Semi S2</li></ul></div> <div> </div> <div class=prodArea03> <div class=prodArea03_txt> <ul class=smell01List> <li><strong>Power :</strong> A/C 200~240V. 1phase. 60Amp</li> <li><strong>CDA :</strong> 4~7kgf/cm²(60slm). 3/8″Tube</li> <li><strong>N₂: </strong> 4~7kgf/cm²(30slm). 1/4″Tube(Optional)</li> <li><strong>PCW :</strong> 3~5kgf/cm²(4ℓ/min). 1/2″Tube(Optional)</li> <li><strong>City Water :</strong> 3~5kgf/cm²(3ℓ/min). 3/8″Tube</li> <li><strong>Gas Inlet :</strong> NW50 Flange 2ports(Optional 4Ports)</li> <li><strong>Drain :</strong> Acid Drain <strong>1)</strong> Natural Drain : 40A PVC Pipe <strong class=left110>2)</strong> Power Drain : 3/4”Socket</li> <li><strong>Gas Exhaust :</strong>-50~-100mmH<sub><font size=2>2</font></sub>O. 1m³/min. NW63 Flange</li> <li><strong>Cabinet Exhaust :</strong> -50mmH<sub><font size=2>2</font></sub>O. 2.5m³/min. Φ100mm</li></ul></div> <div class=prodArea03_img></div></div> | Air Treatment |
| 1098 | Oxygen analyzer using zirconium sensor | ZIRKOR302 | RITCO (Royal Industrial Tech Corp.) | http://www.ritco.co.kr | 1. Outline - Oxygen analyzer using zirconium sensor 2. Introduction 3. Characteristics - Quick response speed available to control the process - Available to apply to the situation of maximum by 1400℃ (more than 1400℃ optionally) - It is not necessary of zero gas by fixed zero point using the electric driving principle - It is not necessary of span gas by the automatic test and calibration using the air. - It is available to control maximum 3 probes by one evaluation. 4. Application - Measuring the concentration of oxygen of discharged gas from various industrial situation |
Equipment |
| 1099 | Ozone analyzer | EC9810 | KNJ Engineering Co., Ltd. | http://www.knj-eng.co.kr | 1. Outline - EC9810. ozone analyzer is equipped with automatic temperature/pressure correction. self diagnosis. alarm and graph functions. EC9810 is used to measure air pollution concentration or for air measurement network AQMS. 2. Introduction 3. Characteristics - An user can select a measurement range of 0 - 50ppb. and 100 - 20000ppb - Built-in automatic temperature/pressure correction function - A built- in self diagnosis function and an alarm function - A built-in graph function(concentration. flux and pressure measured are indicated centering on X axis and Y axis on a screen of analyzer) - Periodical cleaning is not required with One Cell. Low Flow. and No mirrors. Long life and easy maintenance -Built-in IZS(self corrector) 4. Application - Ozone analysis |
Equipment |
| 1100 | Ozone generator | Ozone generator | Seimyung Ozone Generator | http://www.ozone.com.ne.kr | 1. Outline The product is an ozone generator using a ceramic discharge tube. A titanium oxide ceramic discharge tube has a high dielectric constant and does not generate impurities at a high temperature upon discharging. while generating high concentration of pure ozone. 2. Introduction SA series air-cooled ozone generator includes a ceramic tube. an SUS316L ozone cell. and a PWM type inverter power supply. The ceramic discharge tube and the ozone cell are formed at a high degree of precision of 10 micron. thereby generating a maximum amount of ozone of 120g/m2 in an air-cooled fashion(See table 1. Attach - 1). 3. Characteristics 1) Use of ceramic tube 2) Oxygen feed and dry air feed 3) Use of SUS 316L ozone cell 4) High frequency inverter power unit 5) Internal delivery system 6) Service oriented design 7) Removable. louvered panels 8) Easy service 9) Easy installation 10) Teflon tubing 4. Application Ozone water manufacturing. food factories. semiconductor. TFT-LCD. research and experiment fields | Equipment |
| 1101 | Ozone generator | UV-ozone generator | Siontech Co., Ltd. | http://www.siontech.com | 1.Outline UV-ozone generator adopts AOP where ultraviolet rays and ozone are synthesized as an advanced sterilization method. UV-ozone generator is a system that can artificially maximize an amount of ozone in the air by using strong ultraviolet rays. thereby exhibiting excellent advantages in sterilization. removal of foul smells. protection of communicable diseases. decomposition of heavy metal. and removal of toxic gas. 2. Introduction (See fig. 1. 2) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000234-2.jpg></center> <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000234-3.jpg></center> 3. Characteristics 1) Generation of pure ozone 2) Use of a high efficiency of lamp 3) Installation of an appropriate capacity of fan for ozone decomposition 4) Installation of a high-level stabilizer making the life of lamp and power saving effect maximized 5) Semi-permanent use term 6) Easy use method 4. Application 1) Livestock fields: pigpens. cowhouses. feed storehouses. spawning henhouses. etc. 2) Food manufacturing: sites. entrances. research rooms. sewage treatment plant. etc. 3) Public places: preschools. theaters. waiting rooms. etc. 4) Hospitals: operating rooms. extracted matter restoring rooms. etc. 5) Others: cabins of ships or planes. rapid removal of paint smells. removal of foul smells in chemical plants. etc. | Equipment |
| 1102 | Ozone generator | Ozone sterilizing system for water tank | Water purification in water tank | http://www.saehanwater.com | 1. Outline This system is an epoch-making treatment method to allow people to drink city water stored in a storage tank of an apartment using ozone of strong oxidizing power and sterilizing power. and to contribute to national health by a water purification method for small-scaled group. 2. Introduction (see fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000287-2.jpg></center> 3. Characteristics (1) Removal of colon bacillus. bacteria. and virus (2) Removal of carcinogenic substances (3) Removal of toxic materials (4) Increase of dissolved oxygen (5) Removal of various heavy metals (6) Removal of agricultural chemicals and synthetic detergent 4. Application (1) Simple water service (2) Domestic water of farming and fishing villages (3) Spring water manufacturing factories (4) Water tanks in apartments. hospitals. hotels. and so on | Equipment |
| 1103 | Ozonizer | Kozone Inverter System | Won Yi Machinery Co., Ltd. | http://www.kozone.com | 1. Outline Ozone as an allotrope of oxygen is light blue gaseous body with molecular symbol O. molecular weight 48. and specific gravity 1.7. Ozone is widely applied to various water disposal because it discomposes organic matter. sterilizers. decolorizers. deodorizers. and remove BOD and COD in water by its strong oxidation next to Fluorine (F). Ozone has bigger solubility than that of oxygen in water and OH。 radical (Hydroxyl Radicals) generated after self-decomposition reacts with organic matter quickly and never leave any odor. color and chemical nature. which means that it never causes any secondary pollution. 2. Introduction 2-1. Principle of Ozone Generation Ozone is generated by various ways. They mostly use the method that electron makes two oxygen atoms by destroying the ring of oxygen molecule. These unstable oxygen atoms generate ozone by immediate reacting with oxygen molecule. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000087_1.jpg><br>Fig 1. Construction of Ozonizer with coated glass by Inverter</center> 2-2. Flow Sheet of Ozonizer <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000087_2.jpg></center> 3. Characteristics - Kozone ? Ozonizer is designed in a new type of construction using aluminum coated tube - Kozone ? Ozonizer has excellent solubility and energy-saving effect as it can get high concentration of ozone by maximizing cooling effect. - Kozone ? Ozonizer is easy to install even in a small space thanks to its small volume by its big ozone production per discharge tube (50g/hr ∼ 100g/hr) - Flexible operation : High efficiency by using the inverter of mid. frequency for its power and flexible controlling ozone production from 10％ ∼100％. - Simple operation. maintenance. and program modification because it is automatically operated by program logic control system. - Automatic control and check of the ozone production with Ozone Monitor connected to the computer. which leads optimum operation.(Optional) 4. Application Ozone is applied to various fields and among them. only a few fields fully depend on ozone. Ozone can show its full performance when it is properly applied according to the purpose. Ozone is used to sterilize. deodorize. remove BOD. COD. and algae. and naturalize poisonous matter in water. Presentry. it is used for high treatment of industrial waste water by pre-treatment of chemical waste water and post-treatment of biologic waste water to reduce pollutant load. For correct ozonization. it needs to take pilot test and then design with the test result. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000087_3.jpg></center> | Equipment |
| 1104 | Ozone Generator | Ozone Generator | Ecoone Tech Co., Ltd. | http://www.ecoonetech.com | 1. Outline - Ozone generator. 2. Introduction 3. Character - This ozone generator produces ozones from gas (AIR/O2) supplied from the oxygen supplier with a silent discharge method and supply the ozons with a strong oxidizing power to the reactor for sterilization. chromaticity and other incapacitation treatments for harmful organic matters. - Temperature of cooling water is maintained at around 5 to 30℃. - Its power supplying device boosts 400V power to 9.4kV and supplies it to the generator. - With a strong oxidizing power. ozone sterilization can be applied to facilities which require an extra process for advanced treatment such as dyeing wastewater treatment facilities and advanced water purification plants. 4. Application - Ozone generator. |
Equipment |
| 1105 | Ozone Measurement Device | 49i | KNJ Engineering Co., Ltd | http://www.knj-eng.co.kr/ | 1. Outline - Ozone measurement device. 2. Introduction 3. Character - Connection with Ethernet designed for efficient remote access. - Reinforced interface of display designed to look larger than one-button program. - Increased data storage and flash memory aiming for user download software - Alignment designed to facilitate access to components 4. Application - Ozone measurement device |
Equipment |
| 1106 | Ozone sampler OZR-3000 | Dongyang Electro-systems Co.,Ltd. | http://www.ando.co.kr/ | 1. Outline - Ozone is used for various purposes such as sterilization. disinfection. bleaching. deodorization. and decomposition with its strong oxidizing power and also is known as clean oxidizing matter because it changed into oxygen in the end. However. it has unstable nature that it is not useful for measuring concentration accurately. Ozone measuring device OZR series is stable measuring device by measuring special ozone absorption. 2. Introduction 3. Characteristics - It is high performance device. which is not affected by light source luminous flux. with one wave and two optical pathways method. - OZR-3000 can get data from two detecting elements with one calculating element that can manage source. gas. concentration and concentration of ozone at the same time. It also forms compact control panel. - Temperature/pressure of gas concentration incentive - Various control outputs 4. Application - Ozone sampler |
Equipment | |
| 1107 | Ozone Sterilization Purification System for Schools and Organizations | I-SU Environment Engineering Co., Ltd. | http://www.ihsenvt.co.kr | 1. Outline • In water treatment. ozone has a more powerful sterilizing effect than chlorine as it can oxidize and dissolve organic/inorganic compounds. It can also remove trihalomethane (THM) precursor. • Ozonolysis against Microbes - Ozone is dissolved in water by gas–liquid contact. and dissolved ozone is involved with oxidation decomposition to react with all kinds of microbes. - Ozone stability relies heavily on pH level. As the pH level increases. the decomposition speed rapidly increases at a pH level of 6 or higher. - Different sterilizers are used in water with different pH levels. - Ozone becomes a main agent of oxidation and triggers an oxidation reaction with the surface layer elements of microbes. which easily reacts with ozone. in an ozone reaction at a low pH level. - The reaction of OH radical. which is created when ozone is dissolved and decomposed in water. is the main agent in oxidation composition at a high pH level. Therefore. it shows powerful oxidizing power. - Ozone is a powerful electrophilic reagent in a low-pH reaction. Therefore. it attacks unsaturated bonds. such as a double bond of cell wall and cell membrane on the surface layer of microbes and a high–electron density part. - Ozone is effective for unsaturated bond cleavage; the oxidation of aromatic compounds with an electron donor and a sulfide; and nucleophilic atoms. such as amines and amino acids. - The purpose is achieved by unsaturated bond series only. and it becomes the main agent of oxidation reaction. In general. it is used in the oxidation of reactive substances. - The efficient sterilization with a changed ozonation condition depends on the type of microbes. 2. Introduction 14Biz-115.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-115.JPG'>3. Character • Virus Disinfection - Viruses are the smallest pathogenic microorganisms living in water. A virus consists of a core of nucleic acid enclosed in a protein membrane. - Diseases caused by viruses are smallpox. rubella. Japanese encephalitis. polio. hepatitis. and others. However. the concerns regarding chickenpox are polio and hepatitis. - Unlike bacteria. virus proliferates immediately if there is a host. Therefore. it inactivates virus by using ozone to suppress proliferation. • Bacteria Disinfection - 0.1–0.2 mg/m of residual ozone concentration and 5–10 minutes of contact time are required for tap water sterilization by ozone. - 99% of colon bacillus is sterilized for beverages. such as Lawrence. and others. by ozonation concentration (0.2 mg/m) and sterilization that is completely performed with 0.4–0.5-mg/m concentration in the real purification plant. - Lactobacillus is one of the pathogens that cause spoilage in the products in the food industry. - Lactobacillus plays the main role of being a secondary pollutant. and it is known as microbes that proliferate rapidly in a fridge. - Most lactobacilli are sterilized by water treatment for 30 seconds because lactobacillus resistance is extremely weak against ozone. - In particular. a few Lactobacillus arbinosus. L. fermenti. and L. casei survive approximately 15-second treatment. but Streptococcus faecalis and S. thermophilus are completely sterilized. • Yeast Disinfection - Yeast resistance is generally weak against ozone compared to bacteria. so most yeast are sterilized through the 5–10-minute treatment. - Among yeast. Candida paracreus resistance is strong against ozone. It still survives the 30-minute treatment. but it is completely sterilized through 60-minute treatment. - Yeast six-strain spore shows stronger ozone resistance compared to nurse cells. but it is almost sterilized through the 10-minute treatment. 4. Application • Ozone sterilization in schools and organizations |
Equipment | |
| 1108 | Ozone/active charcoal water treatment system | Water treatment system by ozone/active charcoal single reaction tank | Ecosum Co., Ltd. | http://www. ecosum.com | 1. Outline This system carries out an ozone treatment process and an active charcoal treatment process in a single reaction tank. so as to minimize a site area. more effectively treat pollutant materials and pathogenic microorganisms adsorbed on active charcoal by producing radical. which is strong in oxidizing power even in a low pH by catalyst ozone by using active charcoal as a catalyst. Thereby. this system is an improved sewage and wastewater treatment system to reproduce active charcoal. and reduce a residual ozone treatment costs and an operation costs by an effective ozone application. 2. Introduction This technology relates to an apparatus and a method for improved treatment of city raw water or wastewater using catalyst ozone and active charcoal. and is to reproduce active charcoal and effectively use dissolved ozone by oxidizing pollutant materials. which are adhered on the active charcoal. by ozone and produced radicals by utilizing oxidizing power of ozone and adsorptive power of active charcoal and by forming various radials of a strong oxidizing power by active charcoal on which a part of the residual ozone is adhered. 3. Characteristics (1) The minimized site area due to an ozone/active charcoal single tank (2) Low energy consumption due to the minimized absorbing power in an ozone processing (3) Increase of water treatment efficiency by producing radials not only in a neutral condition but also in an acid condition due to the active charcoal adsorption of ozone (4) Active charcoal reproduction due to decomposition of organic pollutant materials adsorbed onto active charcoal by the produced radicals (5) Improved efficiency of the existing ozone processing 4. Application (1) Various wastewater treatment plants (2) Water purifying plants | Equipment |
| 1109 | P.P Sheet Lining Waterproof | P.P Sheet Lining Waterproof | EUNWOO INDUSTRIAL CO. LTD. | http://eunwoo.co.kr | 1. Outline -A lining facility for waterproof of water storage. 2. Introduction 3. Character - Safety: No reaction to or release of. ozone and chlorine gas is aroused because of using polyporphyrin type resin which is main material for food containers. - Chemical Resistance: Any gaps which can be made by oxidization of solvent are not formed because of not using thermosetting resins (epoxy. ceramic. and etc.) as base compound and solvent. - Workability: Construction based on uniform products manufactured from the factory is more accurate than construction by spreading epoxy or ceramics. - Water-proofing. - Environmentally friendliness. 4. Application - Water treatment plants. - Sewage treatment plants and waste water disposal facilities. - Lining of diverse chemical storage tanks. - Heavy chemical factories and semiconductor factories. - Containers for drinking water and chemical resistant containers. - Water pipes. |
Equipment |
| 1110 | P.VFT SYSTEM | P.VFT SYSTEM | Wooran Engineering Co., Ltd. | http://www.wooram-eng.com | 1. Outline - Recovery and reuse of energy naturally produced by waterfall and hydrodinamics. - Continuous lifting and lowering of water by the horizontal flow of water. - Available of connection with large amount of filtering tank using its own energy produced by flow process. - Treatment by non-powered process due to the horizontal design of inlet level and outlet level of wastewater. - Securing the ground area and minimizing the installation space by the underground design. - Treatment system of high efficiency and cheap equipment cost and maintenance cost compared to the conventional method. 2. Introduction 3. Characteristics - Not using the power at the precipitation tank and filtering tank. - Efficient treatment by the nonpressure flow. - Biological decomposition is excellent for COD and BOD. - Strong to the shock load. - Repetitive and continuous treatment is available and the cohesion. precipitation and filtration are performed simultaneously. - Cheap equipment and maintenance cost compared to the conventional horizontal filtration process. 4. Application - Advanced wastewater treatment for the community of farming and fishing village - Advanced wastewater treatment of medium and small housing site - Advanced industrial organic wastewater treatment - Livestock wastewater treatment facility and newly established sewage treatment facility - Advanced treatment of water reclamation and reusing facility |
Technology & Process |
| 1111 | Package Type Humidifier (Air Washer) CH-300 | Package Type Humidifier (Air Washer) CH-300 | HWAJEUN ENGINEERING | http://www.hwajeun.com/ | Package type Humidifier CH300. It can generate the large volume of micro particles by 2-fluid type of the compressed air. It is effective in cooling. sterilizing. and removing the fetor by the result of the strong humidifying effects. [ FEATURE ] 1. Best Humidifing & Cooling System With air Washer System. Moisture is enaporated 100% Since that adsorbed high humidity blowing into the room and temperature of the cooling to 3~5% than that of the out air in summer. 2. With Dus Collecting Function Air mixed with fluff is absorbed in large quantity into the machine and therefore inside the plant will be clean and fresh. 3. Ultra Energy-Saving Type Electric power is 1.5~4.4KW witch is designed to and power rates are very low. 4. Automatic Fluff Disposal System Wet type jet system and Dry type slide system. 5. Servere Control Humidity are automatically control with in the range of +-2% respectively inside the plant. 6. Easy Installation This package type of air conditioning system features both easier installation and operation. [ SPECIFICATION ] 1. Humiditying Capacity (Liter/Hr) : 58 2. Volume (W/D/H) : 3500mm / 1400mm / 2700mm 3. Electronic Power of Blower (KW) : 2.2 4. Electronic Power of Water Pump (KW) : 2.2 5. Air Circulation (m3) : 275 6. Suitable Area (m²) : 480 ♦ Abobe Humiditying Capacity shows the valve when operated at room temperature D.B 27°c. W.B 19.5°c. 60Hz | Equipment |
| 1112 | Package type low driving power water purification treatment equipment | KOWA-HYDRO | Hyorim Industries Inc. | http://www.hyorim.co.kr | 1. Outline - This equipment is suitable to the advanced pre-treatment process of water purification plant using slow filtering basin and village waterworks. - It maximizes the condensing efficiency by using the hydraulic condensation and inclined pipe. Also. it. is an economic water purification equipment with using minimum driving power for automatic discharge of sludge and chemical pump. 2. Introduction 3. Characteristics - It is composed of inline mixer for efficient chemical mixing. hydraulic blended condensing part and inclined pipe sediment basin. It is available to install the sand filtering basin at the back selectively. - It solves problems of small scale water purification plant by developing the new process dealing with high concentration of turbidity. - The construction area needs by 1/4 compared to the conventional facility because it is designed by compact structure. - The installation is easy and maintenance and management are convenient. - It is economic equipment because the driving consumption is very small. 4. Application - Small scale of water purification plant and village waterworks - Pre-treatment facility of slow filtering basin - Sand filtration and treatment of backwashing water of membrane filtration |
Equipment |
| 1113 | Packaged System Of Pharmaceutical Purified Water | Packaged System Of Pharmaceutical Purified Water | BECK CORPORATION | Product Description Packaged System of Pharmaceutical Purified Water which is designed as a Package to maximize the price competitiveness and made as a Compact system to integrate the current water treatment technologies. Product Feature Product rate 1.0m3/hr pH 5.0 - 7.0 at 25 degree Conductivity below 1.3 micro siemens TOC below 0.5 ppm Total colonies below 100 cfu/ml Product Specification / Models Specifications Model BKEX-1T Product rate (㎥/hr) 1.0 Product Water Quality pH : 5.0 - 7.0 at 25℃ Conductivity : below 1.3㎲/㎝ at 25℃ TOC : below 0.5 ppm Total Colonies : below 100 cfu/ml Operation Method Automatic Safety Functions Automatic Motor On/Off functions High level Cut-off. Low level Operating Shut-off the water supply Raw water City Water Included Equipment Feed Water Pump. Softener. A/C filter. Micro filter. Heat Exchanger. UV Sterilizer. R/O High Pressure Pump. R/O Unit. EDI Unit. Final Micro Filter Dimension(WxL) 3.000 x 1.850mm Power 380V. 50 & 60㎐ Model Production ㎥/hr (LPD) Dimension (mm) Remarks BKEX-1T 1.0 3000x1580x2200 - Application Applications: - Pharmaceutical Water - General Chemical Experiments -Manufacture of Reagent - Asepsis Water. Rinsing Water for Hospital Laboratories - Ultrapure Water - Water for Semiconductor. Biotechnology and Biochemistry. etc. Other Information Quality is equivalant to the Europe or USA products. But the price is much cheaper by more than 40%. Optional Information - Payment : T/T in Advance - Origin : Korea - Minimum Order : 1 set - Packaging : Export Standard Packing - Inspection : Shipper's inspection is to be final. - Samples : Not Avaliable | Equipment | |
| 1114 | Packed Bed Type Scrubber | Elim Environment Co., Ltd. | http://www.elimenv.co.kr | 1. Outline Packed tower is a typical liquid dispersion type dust/gas absorption system. The double film theory is that thin double films (interface) are formed at the contact surface of gas and absorbent. and the gas is moved and absorbed to the absorbent through the interface. which has the most support recently among gas absorption theories. The transfer of materials through interface is depending on the contact area size. Packed tower is a dust collection system consisted with packed materials. spray nozzle. etc. considering above points to the maximum. 2. Introduction 3. Characteristics - The absorption effect of packed tower is dependent on the area size of film. so the packed material has been designed considering sufficient contact area and minimum pressure drop. - Overflow by absorbent holdup has been reduced to the maximum by proper control of the tower capacity differently from other dust collectors - Channel effect (the phenomenon that absorbent cannot be supplied to a certain part of the tower as of inflow failure). which is a cause of efficiency drop of packed tower. has been corrected by improvement of spray nozzle. 4. Application - Plating factory. volatility and organic compound generating factory. chemical & dust in chemical factories. odor generating work sites such as wastewater treatment plant. and other various hazardous gas generating factory |
Technology & Process | |
| 1115 | Packed Tower | PACKED TOWER | Hytech Eng Co., Ltd | http://www.hy-tech.co.kr | 1. Outline - This method uses principle which separate particles by promoting cohesion of particles as emitted gases are inserted into the main body of the facility and pollutants are cleaned with liquid drops. liquid films and air bubbles. and are adhered to particles. This increases specific surface area and emits clean gas through gas/liquid (DEMISTER) separation. The preventive facility is widely used to treat water-soluble toxic gases. 2. Introduction 3. Characteristics - Expand specific surface area as filler is included - Absorb gas and remove dust at the same time - Gas cooling and purification accompanying high temperature and moist - Recover and neutralize corrosive gas and mist - Available for longer use of corrosion proof material - Improved treatment efficiency by adjusting amount of water supply - Excellent in adapting to changes of gas amount - Need to treat generated wastewater and sludge - Need to replace filler regularly 4. Application - Electronics and semiconductor industries - Metal product manufacturing industry - Machinery manufacturing industry - Car component manufacturing industry - Painting related industries - Basic chemical and general chemical industries - Textile and leather industries - Food and pharmaceutical industries - Grain and feed industries - Industry sites emitting various types of toxic gases | Technology & Process |
| 1116 | Paddle dryer | Paddle dryer | Samyoung Plant Co., Ltd. | http://www.syplant.co.kr | 1. Outline - The conventional heat wind type contacts and dries the sludge directly. However. the paddle dryer heats the jacket and paddle by steam and then the heated paddles are rotating and supplies the contacting conduction heat to sludge and evaporates the moisture. The total heat transfer coefficient is high and the drying efficiency is good. The dust particles of emission gas is produced by small amount. 2. Introduction 3. Characteristics - Small installation area - Compact facility - High heat efficiency and conduction - Small amount of air supply and dust-containing - Easy maintenance and operation 4. Application - Wastewater treatment plant - Sewage treatment plant |
Equipment |
| 1117 | Painting & coating plant | Painting & Coating Plant | Sang Won Machinery Co., Ltd. | http://www.sw-mc.co.kr | 1. Outline - For the first time in Korea. the company achieved localization of planting plant for automobile industry and localized emission gas purification system of painting dehydrating lines to meet the support from the clients. The Ministry of Environment appointed this technology as a New Environmental Technology for the Next Generation as it has been successfully commercialized. In addition. the company has supplied more environment-friendly energy saving painting and coating plants through supply of successful water soluble painting plant as a VOC reduction process. 2. Introduction 3. Characteristics - Improvement in speed and accuracy by addressing Turnkey System engineering. manufacturing and construction. and all-in-one maintenance - Improved response capacity of full automation and customized system focusing on safety and convenience - Excellent technology and reliability accumulated from first localization in the industry and the longest and the highest performance in Korea - Enhance technology through chemical analysis and dehydrating experiments of various painting. coating. impregnating. and cleaning materials - Provide environment-friendliness for the best exhaust gas purifying system guaranteeing clean work environment 4. Application - Body Painting & Coating Lines of Passenger Cars or Trucks - Parts Painting & Coating Lines of Passenger Cars or Trucks - Body/Parts Painting & Coating Lines of Heavy Equipments - Steel Pipe or Sheet Paining & Coating Lines - Painting & Coating Lines of Furniture and others |
Technology & Process |
| 1118 | Painting Facility (Gana Paint, Dryer System) | Gana Paint, Dryer System | Gana Environment Engineering | http://www.gana1.co.kr | 1. Outline We have localized the spray gun. which is necessary for painting and coating equipment. various kinds of bitmap nozzle. and dispenser of metering feeder to improve the delivery and pricing competitiveness of facility. and endeavoring to fulfill the customers’ requirement in the all the time researching attitude. Particularly. we have developed the micro flow control system. which had been almost barren area in the fluid control field in Korea. for the application to the thin film coating to bring up big effectiveness in the relevant industries. 2. Introduction 3. Characteristics - Affordable investment cost and maintenance expense - Designed with high spray coating rate for efficient operation when installing with our own design - Designed and installed with the parts that can be purchased in the market - Performing stable production efficiency for the product quality standard of each company - Design can be modified for the efficient operation for various products 4. Application - Can provide the fluid metering feeder. mixer. coating device. spray. and filtering device. which are essential in the electronics. semiconductor. chemical. pharmaceutical. automobile. steel making. and environment industries. collectively from design. manufacturing. installation. through startup operation |
Technology & Process |
| 1119 | PAOR System | Paor Co., Ltd. | http://paor.co.kr | 1. Outline The key to the ozone treatment facility is ozone reaction efficiency and the design of the components such as ozone generator depends on the reaction efficiency. PAOR system is an ozone reaction accelerating system which contacts ozone to the treated water strongly to accelerate ozone oxidation. 2. Introduction 3. Characteristics - Water quality improvement effects and confidentiality: Contact oxidation of ozone gas. remove disconnection at reaction and reaction blind spot to guarantee stable water quality improvement. - Safety for surrounding environment: It is easy to maintain sealing for ozone gas in the process of ozone treatment. and due to fast ozone reaction speed of treated water. the residual ozone is minimized. leaving no toxic elements for surrounding environment. 4. Application - Water supply; advanced water treatment; stock raising. excreta wastewater treatment. reclamation and reusing system; wastewater treatment. reclamation and reusing system; sewage sterilization; chromaticity removal; water improvement and wastewater reclamation and reusing system; industrial wastewater reclamation and reusing system; swimming pools. farms and other sites needing water quality improvement |
Technology & Process | |
| 1120 | Partially Filled Pipe Flowmeter | Partially Filled Pipe Flowmeter | SURO Tech Co., Ltd. | http://www.surotech.com/ | 1. Outline - It can measure flows precisely and rapidly under any condition. The DataGator which is manufactured by Renaissance Instruments uniquely designed to monitor sewage flows offers accuracy which the NIST is able to rely on because of no need on any correction on the spot or any drawing of a longitudinal section on flow. 2. Introduction 3. Character - Open Channel - Full Pipe - Surcharged - Submerged - Reverse sewage pipe’s flow monitoring 4. Application - Flowmeter |
Equipment |
| 1121 | Particle size analyzer | VASCO | Modern Environment Technology | www.met21.co.kr | 1. Outline VASCO measures nanoparticles of suspension using PCS (Photon Correlation Spectroscopy). which exploits the scattering of light. Accurately controlling the thickness and temperature of a sample. the patented sample cell of VASCO can measure the highly-concentrated suspension without causing the problem of separate dilution of sample or multi-scattering. 2. Introduction 3. Characteristics - 6µm ~ 1nm - Concentration ranges up to 40% - Can be measured with a small amount of sample (50µL) - Innovative patented technology - No consumable part - Easy cleaning - ISO 13321 / 21CFR part 11 - Size distribution display - Online measurement (option) - Portable (<12kg) 4. Application - Food: milk. chocolate. coffee. beer - Medicine: suspension. powder. syrup. injection. microcapsule - Chemicals: macromolecule. dispersion. agricultural pesticides - Environment: tap water. waste water. precipitate. membrane - Cosmetics: perfume. cream. emulsion - Petrochemistry: fuel. crude oil. bitumen additives - Biochemistry: virus. carbon fiber. etc. |
Equipment |
| 1122 | Particulate Concentration Meter. | Dustmate | KEMIK CORPORATION | http://www.kemik.kr | 1. Outline - Instant presentation of the numeric result at the site from quick measurement. it is very convenient for the indoor air quality monitoring or the concentration variation measurement. It is an Indoor Particulate Matters Counter that is possible to perform the real time simultaneous measurements of TSP. PM10. PM2.5. PM1 concentrations in the indoor air 2. Introduction 3. Characteristics - Real time simultaneous measurements of TSP. PM10. PM2.5. PM1 concentrations by one time sampling. - With built-in pump which performs a light scattering type (laser beam) concentration measurement. it displays the statistical distributions - Automated Data Saving and Data transfer to Desktop PC (Various analysis data printout available with AirQ32 Software) - With One-click access and short Response time. the result data displays on the screen of the device itself (Possible to perform automated computation function of concentration volumes and separate indication function by size) - Functions of Auto stop Counter. Interval. and Alarm 4. Application - Very effective air quality monitoring in the building as well as in the clean room - Efficiency measurement of the air purifier and the dust collector |
Equipment |
| 1123 | Particulate Monitor | Microdust Pro | APM Engineering | http://www.apm.co.kr | 1. Outline - Measuring automatically and continuously the concentration of PM10 and PM2.5 2. Introduction 3. Characteristics - Real time monitoring the dust concentration by the unit of ㎍/㎥ - Calculating and displaying the average by 1 - 60 seconds - Saving the measured data up to 15.700 cases and printing it by the personal computer - Available to use continuously over 9 hours by rechargeable battery - Available to measure the dust concentration of duct by separated sensor - Available to sample and measure at the same time by using gravimetric adapter 4. Application - Real time measuring TSP. PM10 and PM2.5 in the air and indoor air - Measuring the efficiency of air purifying device and dust collecting device - Measuring the dust of blasting. coating booth. and welding dust |
Equipment |
| 1124 | Patented Eco Wash Ball | Patented Eco Wash Ball | WELLOSKOREA CO., LTD. | http://www.welloskorea.com/ | The only Patented Laundry Ball - 100% Natural Components - Antibiotic - Chlorine Neutralize - Environmentally Friendly * FEATURES * 1. O2-ion Wash is a scientifically designed device with 4 types of natural ceramics and 3.000 Gauss permanent magnets which enable washing with less detergents. 2. O2-ion Wash is an optimum washing solution that replaces common synthetic detergents. 3. O2-ion Wash provides excellent performance in cleaning. bleaching and sterilizing. It has been approved and certified by KATRI National authorization Institute. 4. Compared with existing laundry methods. O2-ion Wash saves detergent. water. electricity. time. enhances health and benefits the environments. 5. O2-ion Wash is a state of the art design and is made with patented materials which offer outstanding in performance and effectiveness. 6. O2-ion Wash is a foamless laundry alternative that neutralizes chlorine in top water. protects the skin. preserves the color and extends the life of the fabrics. As a bonus. it does not leave residue on clothes. * WASHING PRINCIPLES * 1. Wellos Washing Pellets emit powerful far-infrared rays that break water molecules hydrogen-combinations into small clusters. The small clusters get activated and increase the molecular motions. penetration force. and washing power of the water. The ions generated weaken the surface and inter fabric adhesion causing the dirt to come off easily (action usually accomplished by a surfactant in a detergent). 2. Wellos Alkali Pellets provide the pH level that ordinary chemical detergents do and help remove oily dirt from clothes. 3. Wellos Antibiotic Pellets eliminates the mold. pathogenic organisms in the washing machine and activates the water to increase the cleaning strength. 4. Wellos Chlorine Neutralizing Pellets eliminate the chloride compound in washing water. loosen the surface tension of the water and increases the cleaning strength of the water. 5. Function of Magnetized Hexagonal Water. 1) Removes Scale or Rust. 2) Softens Water - The water molecule is transformed into Magnetized water through high pressure magnetic discharge. This process changes hard water into soft water and minimize the size (cluster) of the water molecule. 6. The shape of the Ideal Washing Solution and its projections maximize the surface tension of washing water in order to improve washing power. 7. It cuts off detriment of remained detergent and chlorine in tap water entirely. So. its effective in protecting environment. clothes and human skin. 8. The Noxiousness in a surlactant is substituted by Specially treated permanent Magnets and the Far-Infrared Balls. * EFFECTS * 1. Prevention skin problem caused by residues of detergent as there is not detergent used for washing. 2. Prevents the oxidation and discoloration of fabric caused by chlorine and retains the electricity of fabrics. 3. Eliminates mold through its powerful antibiotic effect pathogenic bacterial which cause unpleasant odors and uncleanness. 4. With these combined functions. it is not necessary to add any bleaching agent. fabric conditioner and other washing additives. 5. There is no fabric tangle and twist. 6. For people with hypoallergenic. sensitive delicate skin and newborns. the O2-ion Wash is the ideal laundry solution. 7. Economical efficiency. skin health protection and reducing the pollution caused by synthetic detergent. So. it’s like catching three pigeons with one bean. | Eco-Friendly Products |
| 1125 | Patented Non-Skid Coating system | Patented Non-Skid Coating system | Halla Chemical Co.,Ltd | www.hcmma.com | <div class=0 style=text-align: left; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>Cracks occur on the surface as a result of contraction and expansion occurring in response to changes in the surface temperature of the substrate when products lack bending capacity. even though their strength is strong.</span></div> <div class=0 style=text-align: left; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>Cracks are followed by dislodging of aggregates caused by the external shock (vehicles) when products are not shock-resistant.</span></div> <div class=0 style=text-align: left; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> <div class=0 style=text-align: left; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> <div class=0 style=text-align: left; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> | Air Treatment |
| 1126 | Pore control fiber filter | PCF FILTER | RAPHATECH CO. | http://www.env2000.co.kr | 1. Outline It means the pore control fiber filter. It is made by compressing micro-soft fiber bundles with a rotary unit or compression packs to make pores small. which is then filtered. Afterward. its pores are made large by making it relaxed to back-wash with pressured air or water. It is a new filter that combines the precision filtration function of cartridge and the back-washing function of sandfilter. 2. Introduction(See fig 1. table 1) 3. Characteristics 1) High efficiency and good water quality - Active sludge-treated water base. efficiency: over 95% and water quality: 5ppm or less 2) Subminiature. light weight and cheap - volume 1/5 or less. weight (including filter medium) 1/10 or less compared to rapid S.F 3) Long Back-wash time and less back-wash water - Back-wash time: 2~5 minutes. the quantity of back-wash: around 2~5% 4) Long filter medium life and easy exchange - pp. Nylon material. Exchange within ten minutes of filter module 5) Automatic product - When reaching a set pressure. returns to a filtering process after an automatic back-wash 4. Applications 1) Filtering of sewage/foul water/wastewater. and heavy water-treated recycled water 2) Filtering of underground water. purified water tank. drinking water of a spring water company. etc. 3) advanced treatment (activated carbon. the ion top. ozone. UV) and membrane separation (R/O. NF) pre-treatment 4) Filtering for keeping purity in a bathhouse. a swimming pool. a fishing place. an aquarium. etc. 5) Filtering of green/red tide. mud water. etc. in the sea. water-collecting place. a fish-farm. a pond. etc. 6) Filtering of cooling and circulating water in a power plant. an iron plant. etc.. agricultural and industrial water. and the like. | Equipment |
| 1127 | PCF Filter | PCF-3000 | Sseng Co., Ltd. | http://www.ssecor.com | 1. Outline - It means Pore Controllable Fiber Filter(lift type). Flexible fiber bundles surrounding around the strainer are pulled-up to the longitudinal direction to reduce its pore size. After then the filtration is started. It is a precise and advanced fine fiber filter unit having backwash water with compressed air after releasing them. Accordingly. it is called as an automatic back washable cartridge filter. 2. Introduction 3. Characteristics - High efficiency and excellent water quality - Compact size and low cost - Less time and water required for the backwashing - Long life-time of filter media and simple to exchange - Fully automatic operation 4. Application - For improving the discharged water quality; filtering the waster water for recycling process - For filtering drinking waters such as for bottled water factory and city water filtration plant - For pretreatment filtering such as advanced treatment and membrane separation - For filtering swimming pool and aquarium - For filtering at a city water intake facility or fish farm to remove green/ red tide - For filtering collinmg/circulating water and agricultural/industrial water. |
Equipment |
| 1128 | PCF Filter (Pore Control Fiber Filter) | BCO Co., Ltd. | http://www.ibco.co.kr | 1. Outline It is a gravity type fiber filtration system with extended nonwoven fiber filter bundle. which has been fixed on the bottom. and compressed to make 2~3cm of filtering layer thickness on the perforated plate. It filters by gravity of about 30cm water level difference. Its filtering material is relaxed and backwash air is sprayed. when set water level is reached. to generate violent upward water flow for backwashing by strong shearing force of the fiber mobility. It is called GFF (gravity flow fiber) filter. also called pumpless filter in another name as backwash pump is not necessary because upward water flow supplies the backwash water when two or more systems have been installed. 2. Introduction 3. Characteristics - No need of filtration pump: Filter material is compressed in 2~3cm thickness on the perforated plate for the gravity filtration by 30cm water level difference - No need of backwash pump: Filtration tank water is supplied automatically by overflow as of the water level rise when spraying the backwash air (when multiple systems are installed) - Minimized filtration device: Rectangular type filter plate for wider filtering area per same space compared to cylindrical type filter plate - High efficiency filtered water quality: Deep filtration effect by thick nonwoven mobile filter layer compared to fixed woven filter layer - High efficiency backwash function: Violent mobile backwash is available by nonwoven mobile filter layer to prevent salt attachment and breeding of biofilm - Maintenance during operation: Design to prevent inflow mixing of raw water by activation of check valve when installing/detaching the unit filter (optional) 4. Application - Improvement of discharging water quality. filtration of water reclamation and reusing water - Pretreatment filtration such as advanced treatment and membrane separation - Filtration of green/red algae in water intake plant and fish farm - Filtration of potable water in the bottled water company and water purification plant - Filtration for cleanliness in the swimming pool and aquarium - Filtration of cooling circulation water and farming/industry water |
Equipment | |
| 1129 | PCF Filter. | PCF Filter. | SSeng Co., Ltd. | 82-51-304-3531 | 1. Outline - Fiber bundles around the perforated pipes are compressed with a pressing means like a roller. Fiber bundle’s pores get smaller and function as filter. Then. pores get expanded again so that compressed air and backwash water backwash the filtrate. This is called “Twist filter” because the fiber bundles twist around the perforated pipes during filtering. and it is also called “Pore control fiber filter” because it controls pore diameter by way of compression and relaxation . 2. Introduction 3. Character - High efficiency and excellent water quality - Based on the filtered activated sludge water. the efficiency is more than 90% and SS is below 1.5ppm. - Compact. lightweight. and cheap - The volume is 1/5 smaller than that of a quick S.F method and the weight being below 1/10. - Backwashing time is short and backwashing water is little. - Long-lasting filter and easy filter changing 4. Application - Improvement of released water quality. mineral water manufacturers. advanced water treatment facilities and water intake stations. |
Equipment |
| 1130 | PCF(Pore Controllable Fiber) Filter | PCF(Pore Controllable Fiber) Filter | SUNGSHIN Engineering Co., Ltd. | Product Description It means Pore Controllable Fiber Filter(lift type). Flexible fiber bundles surrounding around the strainer are pulled-up to the longitudinal direction to reduce its pore size. After then the filtration is started. It is a precise and advanced fine fiber filter unit having backwash water with compressed air after releasing them. Accordingly. it is called as an automatic backwashable cartridge filter. Application ♦ Discharge with enhanced quality of effluent as the third treatment ♦ Reuse the effluent directly by high removal turbidity and T-P ♦ Pre-treat STP effluent to reuse by RO systems ♦ Prolong the life time of recirculation water like cooling tower. swimming fool. aquarium and etc. ♦ Produce drinking water from high turbid water directly. ♦ Produce the deionized water with demineralization systems(Ion Exchange. RO) ♦ Produce the desalinated water from the sea water with SWRO systems | Water Treatment | |
| 1131 | PE Ball Valve | Polytec Co., Ltd. | http://www.polytec.co.kr/eng | - ISO 9001 Certified Manufacturing facility - Serialized for complete material and process traceability - Unrestricted flow and maximum capacity for optimal performance - Service rated to maximum allowable pressure - Precision manufacturing proces | Equipment | |
| 1132 | PE E/F fitting | DN25, DN63, DN90, etc. | Polytec Co., Ltd. | http://www.polytec.co.kr/eng | The heat. created by the electrical current passing through the exposed coil of the E/F fittings. is transferred directly to the PE pipe. The coil protrudes from the interior surface of the fittings. When the pipe is heated. the coil sinks into it creating a much stronger bond. As a result of this process. every joint will be as strong as the pipe itself and sealed precisely to specification. It is able to automatically operate minimizing the risk of human error by an electronic fusion device. With this outstanding sealing technology. Polytec Electro Fusion System keeps the highest pressure rating and is most optimized to PE piping connection in the industry. | Equipment |
| 1133 | PE Fusion Equipment | PE Fusion Equipment | Dasan Co., Ltd. | 1. Outline - PE manual butt fusion equipment that has pressure and heat control system. It controls the temperature and pressure applied to the surface of the pipe while fusing the pipes. 2. Introduction 3. Characteristics - Heat control thermometer is attached in order to control the temperature and pressure applied to the PE pipes. so the pipes can be joined flawlessly. 4. Application - Joint fusion of water pipes. urban gas pipes |
Equipment | |
| 1134 | PE Layflat Hose | PEFLEX | 82-43-534-0773 | 25% ~ 50% Lighter than PVC Lay Flat Hose Reinforced with PE yarn Excellent Elongation perfomance in length & diameter at temperature range from -70celsius ~ 70celsius Easy to coil and carry in the field Made of Recyclable & Non-toxic material. Polyethylene 2.5% of Carbon Black for longer life span | Equipment | |
| 1135 | PE Piping Material | PE Piping Material | Dasan Co., Ltd. | 1. Outline - PE pipes are synthetic resin pipes made from thermoplastic polyethylene abstracted from petrochemical raw material known as naphtha. 2. Introduction 3. Characteristics - Corrosion Resistant : PE is not erode by acid or alkali. and it is extremely chemical resistant. so it is widely used in industrial wastewater treatment pipes and landfill leachate transportation pipes. As it cannot be eroded by salt. PE is applied to various water pipes in coastal industrial zones. marine farms and enclosed net fisheries. In addition. as it is nonconductor of electricity. PE if free from electric corrosion. so it is used as electric power line protection pipes. - Hygienic : PE pipes not only does not discharge any harmful substances but it prevents germs and bacteria from multiplying. As the purity of the contents is maintained for a long period of time. it is recognized as one of the best material for drinking water pipes. - Mobility : As the friction value of the internal surface is lower than other pipes made by other material and scales do not pile up with in the pipes. the loss of liquid is minimized. The discharge capacity is very high and in long-term the economic feasibility is excellent. - Flexibility : The flexibility of PE pipes is excellent. so there is no need to use curved pipes in low angle winding areas. Also. as the differential settlement is very strong it shows high earthquake resistance capacity. During the Japan’s Kobe earthquake or Korea’s summer floods there were many incidents of underground pipes bursting. but PE pipes mostly maintained their original form proving its flexibility. - Abrasion Resistant : Compared to pipes made from other material. PE pipes show excellent abrasion resistant features. so they are widely used in dredging pipes and ash treatment pipes in thermal power plants. - Installation : Due to its light weight. it is easy to handle PE pipes and junction operations can be completed in minimum amount of time. Also. there is no worry of leakage as the fusion joint system is flawless. - Cold Resistant : As there are not physical change in the PE material up to 80C. the pipes will never crack from cold in winter - Shock Resistant : Based on the characteristics of the material. the pipes will not be easily damaged due to external shock. 4. Application - Waterworks. agricultural water pipes. waste landfill pipes. golf course pipes. industrial water pipes. waste water treatment facility pipes. thermal water pipes. chemical pipes. and enclosed net fisheries |
Technology & Process | |
| 1136 | PE Sheet Lining | Gentro Co., Ltd. | http://www.gentro.co.kr/ | 1. Outline - HDPE is produced by cutting edge production method and is approved all over the world with great processibility and high quality. - PE is olefin resin with the greatest hydrophile property. and is used for water supply facilities. a tank of drinking water. and chemical tank. - In addition. it won’t produce endocrine-disrupting chemicals such as PVC. FRP and doesn’t have a reinforcing agent. - PE Sheet Lining is completed by putting PE sheet inside of a tank. concrete reservoir. and water reservoir and using heat-welded anatomosis. - PE Lining minimizes the possibility of pollutant outbreak by fur and moss in water and makes the surface stronger that it prohibits the cracks by shocks. Furthermore. it is harmless to human bodies. 2. Introduction 3. Characteristics - Corrosion or rust never occurs. ㆍCorrosion or rust by chlorine gas doesn’t occur. Also. chemical resistance(acid. alkali) is great that sea algae or bacteria cannot be reproduced and corrosion doesn’t occur by corrosive substances in soil. - Clean and sanitary technology ㆍIt doesn’t produce harmful substance or endocrine-disrupting chemicals because it has high hydrophilic property. - It is semi-permanent. ㆍIt is permanent compared to other substances because the abrasion resistance of this PE and PP material is great. The modulus of elasticity is high that it doesn’t get damage except for deliberate damage. Also. it can be restored easily and lasts long. - It doesn’t leak. ㆍUsing pins. PE sheet can be put on CON’C side and put one more PE Sheet on the pins and they can be welded by heat. - It is reusable. ㆍIt can be reused because it is produced by heat molding press and special extruding technology. 4. Application - PE lining inside the existing or new concrete tanks - PE lining inside FRP tanks - Lining concrete reservoir for groundwater - Lining chemical tank in a filtration plant |
Energy | |
| 1137 | PE Water Pipe | PE Water Pipe | Samjin V&P Co., Ltd. | http://www.sjvp.co.kr | 1. Outline - PE Water Pipes. 2. Introduction 3. Character - Using the high-density polyethylene material which has outstanding physical-chemical properties. our semi-permanent pipes are free from corrosion or abrasion. and they are therefore an exceptional product which replaces existing plumbing materials. 4. Application - Drain Pipe. - Water supplying pipe. - Water conveyance pipe. |
Equipment |
| 1138 | PEM type Hydrogen generator | PEM type Hydrogen generator | Energy and Machinery Korea Co., Ltd. | http://www.yesemk.com | 1. Outline This PEM type Hydrogen Generator is an environmentally friendly system with zero greenhouse gas emissions which enable stable supply of hydrogen. 2. Introduction 3. Characteristics - An environmentally friendly system with zero greenhouse gas emissions - Cost reduction through low-cost hydrogen generation - Safe and stable hydrogen gas supply - Intermittent hydrogen gas generation with a zero risk of high-pressure gas storage - High user convenience by an auto control system in entire hydrogen generation process - Safety and Stability guaranteed through thorough a durability test 4. Application - Hydrogen generator |
Technology & Process |
| 1139 | Pendant tongs type screen for suspended solids | Pendant tongs type screen for suspended solids | Jungang General Machinery Co., Ltd. | http://www.cagm.co.kr | 1. Outline - It is to remove the suspended solids on the surface of water. - It is for the waterway which the difference level of screen and collecting part is very large. This screen aims to make the water flow smooth by installing it at the inlet of facility such as electricity generation plant as well as river. flood-preventing facility of dam or river which have much adulterated materials of various kinds and big volume. 2. Introduction 3. Characteristics - Maximum capacity to 3.000kg - Flexible lifting angle from 45˚ to 90˚ - Wide range of bar distance from 20mm to 300mm - Lifting deep waterway maximum 50cm - Treating all volume of adulterated materials (long wood. large drum and pallet) - Speedy movement to treat the wide range of waterway - Controlling the remote pendant and fully automatic operation by checking the waterway 4. Application - Rainwater pumping station - Water discharging station - Inlet of electricity generation plant and cooling water - River leveling facility - Discharging facility of dam and river - Floating screen of rotary screen inlet |
Equipment |
| 1140 | Permeable rubber block | GK color permeable rubber block | GK greenkeeper Co., Ltd. | http://www.blockkorea.com | 1.Outline As cities are developed. the ground surfaces are changed to concrete buildings and streets are covered with asphalt. concrete and concrete blocks being made of non-permeability materials. When it is rained. the rain water is not absorbed underground. but gathers to run off at a time. so that sewage capacities increase and the levels of water of the rivers (branch of river in the cities) rise. which causes the surrounding environment to be damaged like the generation of floods. the shortage of underground water. and the like. 2. Introduction(See fig 1. 2. Attach-1) 3. Characteristics 1) Desired design by various colors 2) Preventing water drainage from the road surface from being in bad conditions and keeping the rivers in the city from being flooded 3) Reservation of underground water by making water permeated through blocks soaked into the ground surface 4) No slipping and splashing even though it rains. because of the porous structure of the road surface 5) Prevention of the generation of noises by absorption of sounds to the fine pores 6) Reduction of wastes by recycling of waste tires 7) Melting effect of snow by making geothermy kept 4. Application Sidewalks in the cities. parks and apartment areas. amusement parks | Equipment |
| 1141 | Perpendicular rising type rotary auto screen | Perpendicular rising type rotary auto screen | Jungang General Machinery Co., Ltd. | http://www.cagm.co.kr | 1. Outline - This equipment is to remove the various adulterated materials in the water. - Rake chain for each waterway discharges the adulterated materials with rotating by rear lowering and front lifting. The front screen and the body of rotary screen is a single type so it can conduct the maintenance and repairing by lifting the screen without cofferdam. 2. Introduction 3. Characteristics - Repairing and maintenance are available without cofferdam because the front of body is lifted over the water. - In the dry season and no inflow water. the main body is lifted so it can maintain the waterway effectively prevent the corrosion. - Smooth moving of rake by washing (equipping the side spraying pipe with the upper of cover to spray the washing water on the upper of apron. inducing the smooth moving of rake by removing the adulterated materials of apron by washing the apron) - Rotary type rake with the front lifting and rear lowering (the rake installed at the endless chain is lowered on the rear of main screen and lifts the adulterated materials at the front of main screen by interlocking with front screen) - Preventing the load by the hitch of driving part - Cover installed the chain guide rail - Single body type rotary screen - Preventing the rake drooping 4. Application - Rain water pump station - Water-discharging pump station - Rainwater treatment facility |
Equipment |
| 1142 | Portable pH meter (DPM 10) | Portable pH meter (DPM 10) | DIK Co., Ltd. | http://www.instrument.co.kr | 1.Outline The present meter has a portable compact body that can be treated in a user’s hand and also has a drip proof feature. It has a large-sized LCD that can display the measuring result well. and as it has one-touch auto-calibration and auto power off function. its manipulation is simple. 2. Introduction(See table 1) 3. Characteristics 1) Drip proof structure - Possible to use when a user’s hand is wet or when it rains. 2) Large display screen - Information on multifunction is displayed on a large LCD screen such that a user can read the data rapidly. 3) Auto power off function - When it is not operated for about 30 minutes. it powers off automatically. which prevents the power from being unnecessarily consumed. 4) Beep function - When it operates abnormally. it generates a beep. 5) Temperature display - As a temperature is displayed on the same screen. it does not need to measure the temperature. 6) Auto temperature compensation - The measured value of the liquid checked is automatically compensated in the temperature. which eliminates the possibility of generating an error due to the temperature. 4. Application pH measurement in the water | Equipment |
| 1143 | Phosphorus treatment system | Phosphorus treatment system | DONGSHIN EN-TECH Co., Ltd. | http://www.sdaf.net/ | 1. Outline - The phosphorus treatment system of DONGSHIN EN-TECH Co.. Ltd. refers to a chemicophysical process which attaches pollutants in raw water that has undergone a confusion/coagulation process to a micro bubble generator and discharges them by making them floated. 2. Introduction 3. Characteristics - Chemicals required can be reduced due to high throughput - Phosphorus can be removed up to 0.02ppm -High throughput efficiency in even BOD. COD and SS -Effect of a load increase is small due to a solid-liquid separation process - Additional back washing process is not required - Easy to cope with changes in load - Easy to ensure stable treated water quality 4. Application - Treatment plant which has poor treated water quality due to a high load factor in the final sedimentation pond - Treatment plant in which seasonal changes in load are great - Treatment plant in which a third filter is operated - Medium and large sized treatment plant |
Technology & Process |
| 1144 | Photo Catalysis Deodorization Facility | Photo Catalysis Deodorization Facility | YT Co., Ltd. | http://www.envi2000.com/ | 1. Outline • The Photo Catalysis Deodorization Facility is a 2-stage deodorization facility developed to compensate for the weaknesses of 1-stage deodorization facilities in today’s changing living environment 2. Introduction 14Biz-35.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-35.JPG'>3. Character • In this system. ozone gas is dissolved by pulse energy generated from an ultrasonic generator and passes through an aeration tank where oxidation-reduction reaction occurs continuously. Then. it is aerated and sprayed through a finely perforated mesh. This process maximizes the contact surface between the gas and the cleaning fluid in which the ozone gas is dissolved resulting in enhanced deodorization efficiency. • After the first deodorization stage. the remaining noxious gas passes the second stage’s media layer and the photo-oxidation catalyst layer of the third stage. Through this process. the OH radical. which is produced by ozonated water and the photo-oxidation catalyst not only accelerates the oxidation-reduction reaction. but also amplifies the oxidizing power more than 30 times. The noxious gas is completely deodorized in the end. 4. Application • Removal of noxious gases and VOC (Volatile Organic Compound) in sanitation facilities • Removal of noxious gases and VOC in sewage treatment plants • Removal of noxious gases and VOC in waste water treatment plants • Removal of noxious gases and VOC in workplaces where noxious materials are generated |
Equipment |
| 1145 | Photocatalyst Sterilization Technology | Photocatalyst Sterilization Technology | S&P Environmental Technology Co., Ltd. | http://www.cleanace.co.kr | 1. Outline - Photocatalyst is a substance that increases the rate of photochemical reaction by using light as energy and gets activated only when light is present. The electron hole created on the surface of photocatalyst reacts with oxygen or water in the air to produce OH Radical. a very strong oxidizing agent. These active species are able to sterilize bacteria and other germs. 2. Introduction 3. Character - Sterilize storage tank outlet with photocatalyst sterilizer. - A water purifier gets easily contaminated by air inflowed into a storage tank. The - photocatalyst sterilizer is put into the outlet of the storage tank in order to purify the polluted - water in a single pass-through. - Free from contamination with cold water tap sterilizer. - Although a storage tank inside the water purifier stays well sterilized. it may be contaminated from outside by hands or equipment that carry pathogenic bacteria or virus. In order to prevent this. put cold water tap sterilizer in place and operates it when necessary. 4. Application - Photocatalyst technology for water purifier. |
Technology & Process |
| 1146 | Photo-catalytic Sterilizer | Wallenius AOT | Midni Co., Ltd. | http://www.midni.co.kr | 1. Outline - Because the conventional UV technology is one to inactivate microbial DNA. microorganisms can be reproduced or mutate into different microorganisms. the sterilization of microorganisms not exposed to contaminated water or to UV rays is difficult with technical limitations. But. powerful OH-radicals generated by AOT directly attack microorganisms. take H atoms. so perfectly sterilize any types of microorganisms. 2. Introduction 3. Character - A direct sterilization method. - Non-chemical treatment process. - Short contact. reaction time. |
Instrument & Chemicals |
| 1147 | Photovoltaic charger | 30MPT | Dongei Ecos Co. | http://www.dongeiecos.com | 1. Outline - A charger of storage battery with high efficiency. Designed and manufactured to be appropriate for independent type of photovoltaic generation system. small water power generation system. independent wind power system. and photovoltaic streetlight 2. Introduction 3. Characteristics - Uses MPPT charging method that follows maximum electricity output point of solar batteries - Over 98% high conversion efficiency - Highly efficient charging controller that efficiently charges generated electricity into storage battery and uses it in inverter operation - Large capacity photovoltaic and wind generation are available - Parallel operation of output is possible 4. Application - Independent type of photovoltaic generation system. small water power generation system. independent wind power system - Photovoltaic streetlight |
Equipment |
| 1148 | Photovoltaic Inverter | SS-3004, 5004 | Dongei Ecos Co., Ltd. | http://www.dongeiecos.com | 1. Outline - High efficient pure sine inverter. which has a system of charging storage battery and a function of ATS(emergency power transfer) in the condition of offering emergency power 2. Introduction 3. Characteristics - Pure sine wave output - Application possible to various independent type systems - AC/DC battery charging - Emergency power transfer switch (ATS) - High surge capacity and perfect insulation design 4. Application - Independent type of photovoltaic. wind power generation system - Electricity backup system using large batteries - Communication and test device of DC 48V equipment - Car. ship. military equipment. communication. work vehicle. camping car |
Equipment |
| 1149 | Photovoltaic Off-Grid Type Inverters | DSI-125K | DASSTECH Co., Ltd. | http://www.dasstech.com | 1. Outline - This type of Photovoltaic inverter converts the DC voltage generated from the solar cells to the AC Power and supply it to the loading appliance. and accumulates any surplus power to batteries so that the power can be available even at night time or at rainy days. This type of off-grid Photovoltaic inverter is the power generation system only with the electricity of solar cells without power connection to and from the power company. 2. Introduction 3. Characteristics - The power is available for 24 hours by using batteries. The system is being generated at nights or under the rain using the accumulated power in batteries as well. - The charging current transformer monitors the voltage of batteries. automatically blocking the power when they are fully charged and connecting to the batteries when they are insufficiently charged. - The system prevents any reversion of current from batteries to the solar cells when the output of solar cells is small. 4. Application - Remote Areas and Isolated Islands - Specific areas where the commercial electricity is not available. |
Equipment |
| 1150 | Photozone System | Photozone System | SCENTEC. Co. Ltd. | http://www.scentec.co.kr | 1. Outline - Photozone Series. a photochemical complex oxidizing deodorization system for industry for the first time in Korea provides high efficient deodorization by making polluted air oxidized and deodorized when passing through the photochemical reaction section. This Photozone System can be easily applied to various industrial settings and is convenient to install and maintain as the system is very easy to adjust the reacting part according to deodorization conditions. Photozone Series is equipped with the basic photozone series for general use. HACO photozone designed to remove high-temperature and high-humidity foul smell and wet photozone to remove sulfur foul smell that helps remove bad odor. 2. Introduction 3. Characteristics - Photochemical complex oxidizing deodorization technology. - High efficient reactor structure. - Non resistant structure. - Economical maintenance is possible. - It is possible to operate safely during four seasons with a dry deodorization system and it does not generate wastewater. - It realized the concept of spatial deodorization. - It is convenient to adjust the reacting part according to the level of foul smell. - It is possible to operate automatically. - It is possible to install in parts thanks to beautiful appearance. a built-in fan and low levels of noise. 4. Application - Deodorization |
Technology & Process |
| 1151 | Physical & Chemical Deodorization Facility (Ablution Type) | Physical & Chemical Deodorization Facility (Ablution Type) | AXXEN Co., Ltd. | http://www.greatexen.com/ | 1. Outline - The ablutionary deodorization facility owned by AXXEN is divided into wet process and chemical process. which can be tailored to the properties of odorous gas in terms of design and application. The facility may remove a large volume of odor only by using a small volume. The wet process deodorization facilities may be installed on the basis of bio filter in a stand-alone form and can impeccably remove high-density odors. 2. Introduction 3. Characteristics - Suitable to the treatment of a large volume of high-density gas - Ability to simultaneously treat dusts - Ability to treat high-temperature gas - Ability to produce synergies when it is linked to a bio-filter 4. Application - Sewage treatment facility - Excreta treatment facility - Livestock waste water treatment facility - Waste food recycling facility - Cattle shed - Animal feed plant - Animal slaughter & processing plant - Semi-conductor plant |
Technology & Process |
| 1152 | Physical & Chemical Deodorization Facility (Photo Catalysis) | Physical & Chemical Deodorization Facility (Photo Catalysis) | AXXEN Co., Ltd. | http://www.greatexen.com/ | 1. Outline - AXXEN’s photo catalysis deodorization facility is designed to treat odors using photo oxidation reaction involving light and catalysis and is mainly used to remove odorous gas that remains at a final stage prior to the discharge into the air after the primary treatment. The photo catalysis deodorization facility has proven an ability to sterilize contagious bacteria and germs in addition to deodorization and excels in sterilizing gas that occurs in public facilities. 2. Introduction 3. Characteristics - Applicable to a low odor load - Able to remove odor in an environment-friendly way - Able to maintain more easily - Able to sterilize 4. Application - Sewage treatment facility - Excretion treatment facility - Livestock waste water treatment facility - Waste food recycling facility - Other sterilization facilities |
Technology & Process |
| 1153 | Physical & Chemical Deodorization Facility(Absorption Type) | Physical & Chemical Deodorization Facility(Absorption Type) | AXXEN Co., Ltd. | http://www.greatexen.com/ | 1. Outline - AXXEN’s absorptive deodorization method is designed to chemically treat the surface of active carbon particles and alumina and increase the ability to absorb a variety of odors. Only by using a small amount of chemicals. the formula can remove a large volume of odor and increase the volume and efficiency in absorbing the odor. This leads the formula to remain active for a 30 percent longer period than the existing activated carbon method. 2. Introduction 3. Characteristics - Ability to remove various odors - Excelling in connected treatment - Ability to treat odors containing water - Occupying a smaller area - Absorption capacity: 150mg-HzS/g-adsorbent 4. Application - Sewage treatment facility - Excretion treatment facility - Livestock excreta treatment facility - Waste food recycling facility - Food plant - Painting facility |
Equipment |
| 1154 | PICAFTM Clarifier | PICAFTM Clarifier | Hyorim Industry Inc. | http://www.hyorim.co.kr/ | 1. Summary PICAF(Package of Inclined Clarifier with Accelerating Flocculation) is comprised of the multi-stage Sliding Cone and Baffle Plates in a Inner Reaction Chamber. Owing to this feature. the raw water and flocculant are easily mixed and reacted by gravity force. then this reacted water flows from bottom to the top (up-flow type clarifier) with the process of sedimentation. Inclined Plates can raise the sedimentation efficiency and guarantee the high water quality for the effluent. Together. the PICAF only needs 1/4~1/6 times smaller space. compared with conventional type clarifier. because of accelerated sedimentation rate by the inclined plates. Moreover. this Innovated structure makes the flocculation. sedimentation and even the sludge concentration without any power supply. 2. Features and Advantages 1) Better efficiency and stability for water treatment. 2) PICAF is packaged one-body type clarifier. therefore. it needs no fabrication at construction site. and only installation will be done at site after fabrication is finished in factory. That's why PICAF can reduce construction period. compared with conventional clarifier. 3) PICAF only needs 1/4~1/6 times smaller space. in comparison with conventional and the other clarifier. 4) Lower initial investment cost 5) PICAF is very economical system in operation and maintenance. because of no cost for power supply or repair of motorized items. 6) One-body type can be moved to other places and reused it. 7) PICAF can be fabricated by module base. therefore extension installation is very easy. and additional installation is possible on existed concrete structure. 3. Applications PICAF type clarifier is applicable to all sedimentation facilities for wastewater or water treatment plant. but special advantages are as follows; 1) Wastewater Treatment Facilities For underground work site including in NATM. TBM. and Sealed TMB as tunnel methods. 2) Wastewater Facilities for Crusher Washing Plant and Crusher Plant 3) Industrial Wastewater Treatment Facilities 4) Mine Wastewater Treatment Facilities 5) Water Treatment Facilities | Equipment |
| 1155 | PIN MILL | TOP 24-P, TOP 10-P, TOP 6-P | Hankook P.M Eng Co., Ltd. | http://www.topcrusher.co.kr/ | 1. Outline - Materials are put through HOPPER to a part located at the center. - Materials are quickly dispersed in circle by rotor gyration power - Powerful impact by fixed blades arranged in rows and spiral blades and shear action accelerate pulverization. - Crushed materials go through a screen by centrifugal force and wind power. - Materials not pulverized cannot pass the screen and have to repeat the process until they have certain granularity. - Materials that pass the screen go to an outlet. 2. Introduction 3. Characteristics - Easy and equal granularity - Heat created by crushing is ventilated out instantly thanks to great ventilation performance. - Suitable for materials sensitive to heat. - Easy maintenance. checkup. cleaning and part replacement. - Connection part and door is air-tight preventing dust creation and material waste 4. Application - PIN MILL |
Equipment |
| 1156 | Pin Rack Dust Separator (Screen) | Pin Rack Dust Separator (Screen) | WONJIN NB TECH LLC | http://www.wjnbtech.com | 1. Outline The company sold more than 1000 Pin Rack Dust Separators (Screen) made by Maejawa Industry’s technology in Japan. The company created the Pin Rack Dust Separator by combining a new technology. which improves maintenance convenience. energy conservation. and construction time. with its own accumulated technologies. The machine can be installed with the angles of 75’ and 90’ suitable for both big and small structures. and be applied in various depths. heights. and widths as it directly discharges sludge without intermediary stages. 2. Introduction 3. Characteristics - Clear recovery - Smooth operation - Reduce operation noise - Speedy operation - Easy maintenance 4. Application - Remove micro-planktons |
Equipment |
| 1157 | Pinch Valve | Duk Young Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Outline This is a valve where a rubber is inserted to block channels. In case air is inserted in the valve body. a sleeve is closed thoroughly. and the sleeve is open thoroughly to control flow of liquid in case air is discharged. 2. Introduction 3. Characteristics - No leakage - A flexible sleeve is removed easily. 4. Application - To control the flow of liquid |
Equipment | |
| 1158 | Pipe corrosion and scale removing equipment | Aquamag. | Dongil Chemical Co., Ltd. | http://www.dongilchem.com | 1. Outline - Environment-friendly pipe protection equipment which removes pipe’s inner scales by using potential difference of magnesium metals (a.k.a. Galvanic effect). and prevents pipe corrosion. 2. Introduction Principle of scale control Fe→Fe2+2e(Oxidation response) Mg→Mg2+2e Fe2++ 2e→Fe 3FeOOH+e→Fe3O4(Magnetite)+H2O+OH- Principle of scale removal Mg→Mg2++2e MgO+Ca2++ Ca2 MgCO3+ Ca2+ 4Fe2+O26H2O 4FeOOH (Goethite. lepidocrocite)+ 8H+ 3 FeOOH+e→Fe3O4(Magnetite) + H2O + OH- 3. Character - Removing & Preventing Inner Pipe’s Scales. After magnesium ions dissolve and remove inner pipe’s scales. magnesium oxide prevents scale’s reproduction by forming a thin layer in the pipe. - Time & Cost Saving. - Reduces inconveniences and an economic burden by replacing the worn-out pipes or with an old. high-cost method. Easy setup enables great time-saving. - Energy Saving - Because of using magnesium ionization’s potential difference. the machine does not need energy supplying such as electricity and magnetic field. When being used in heating pipes. it minimizes thermal losses from the scales. - Antibacterial Effect Achieved with the Silver Nano Technology - Microorganisms such as bacteria. colon bacillus. and so on cannot multiply well in the pipe because of removing the scales. where usually microorganisms exist. Therefore. it is able to use pure and healthy tap water and also the system is full automatic. - Environment-protection Effect - Prevents secondary contamination through restraining chemical use in scale removal. No need chemical use in newly-built buildings. 4. Application - Incineration plants. - Supply water lines. - Coolers. |
Equipment |
| 1159 | Pipe line type link chain conveyor | Pipe line type link chain conveyor | Jungang General Machinery Co., Ltd. | http://www.cagm.co.kr | 1. Outline - It is a sludge-conveying equipment to collect and transport the sludge for wastewater and household wastewater treatment plant. - The link chain inside of the pipe moves by the sprocket of the driving device and the blade connected with the link chain transports the sludge. adulterated materials and cake through the pipe. - It can minimize the installation space irrespective of the site. 2. Introduction 3. Characteristics - Prevention of odor and particle flying - Three-dimensional transportation freely - Semi-permanent transporting equipment - Minimizing the installation space - Available of transport the sludge-containing the moisture - No noise and easy maintenance 4. Application - Conveying the adulterated materials of settling pond of sewage treatment plant - Conveying the settling materials of settling pond - Conveying the dewatering sludge - Conveying the dewatering cake of water purification plant - Conveying the sludge of process line - Conveying the adulterated materials of excreta and livestock wastewater disposal plant - Conveying the dust-producing materials - Conveying the sludge |
Equipment |
| 1160 | Plant Extract Bio Deodorization System | CHUMDAN ENVIRONMENT Inc. | http://www.cdan.co.kr | 1. Outline • It is a newly customized deodorizing technology based on the new odor technology audit (2011.2.5). It is an eco-friendly and high-efficiency deodorization system that solves the problem of chemical washing. biofilter. and burning method. • The inflow of malodorous gas in the deodorization system is absorbed. neutralized. and removed by the plant deodorant of stage 1 BV deodorization tower. The residual gas passed through the deodorization tower is absorbed. decomposed. and completely removed by patented microbes of stage 2 biofilter tower. 2. Introduction 14Biz-441_Plant_Extract_Bio_Deodorization_System.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-441_Plant_Extract_Bio_Deodorization_System.jpg'>3. Characteristics • This deodorization technology uses plant extract with excellent absorption of complex in odors circulating water of BV deodorization tower to solve the problem of chemical washing. which is having issues. such as safety handling of chemicals. surrounding air pollution. and low deodorization efficiency. • The deodorization technology with high efficiency removes highly concentrated complex odor gas in the 1stbv deodorization tower and malodorous gas of low concentration stably through the absorption and decomposition of microbes in the 2nd bio deodorization tower. • It is an eco-friendly deodorization technology using plant extract and patented microbes with low cost. high efficiency. and easy maintenance. It solves problems. such as harmful gas emission and high cost for using fuel of combustion deodorization method. 4. Applications • Bamboo vinegar deodorant • Pyroligneous liquid deodorant |
Technology & Process | |
| 1161 | Plant for injecting chlorine into seawater electrolytic cells | Plant for injecting chlorine into seawater electrolytic cells | Hankook Jungsoo Industries Co.,Ltd. | http://www.haji.co.kr | 1. Outline - Hankook Jungsoo Industries Co..Ltd. has pursued the safe equipment due to difficulty of storage and handling of chlorine gas and supplied the equipment that generates sodium hypochlorite which use sea water based on its rich experience in water treatment plants. 2. Introduction 3. Character - Excellent and economical design. - Seawater electrolytic cells with high efficiency. - High stability (no generation of chlorine gas). - Long and lasting good performance. - Continuous service provided by its rich experience/ 4. Application - Cooling system of power plants. - Gasification system. |
Equipment |
| 1162 | JS PLASMA ODOLESS SYSTEM | JS PLASMA ODOLESS SYSTEM | JESAGI HANKOOK LTD. | http://www.jesagi.com | 1. Outline Activation molecule. Radical. Ozone are generated by the use of high frequency voltage. and odor ingredient or air with VOC are put into harmless one and cleaned air by resolution of occurred electrons collision and oxidization. 2. Introduction(See Fig 1) <Fig.1 Standard Models of JS Plasma Odorless System> 3. Characteristics (1) Auto-operation: remote check and operation by effluent monitor (2) Stabile Capability: constant treatment rate even though changing odor rate and temperature (3) Convenient installation and operation (4) Compact design 4. Applications Place of land-fill. excreta/slop treatment. waste treatment. storage of oil. victuals factory. petrochemical factory. medicine. hospital. textile/dyeing process. painting factory. semiconductor factory. kitchen. automobile factory | Equipment |
| 1163 | Plasma De-odorizing System (PDS) | PDS | Telin Co., Ltd. | http://telininc.com | 1. Outline - It is composed of plasma engineering. photocatalyst chemistry and ozone chemistry. - It has small installation space. low power use and almost no consumable supplies. - It removes the ozone by combining the plasma arc technology. photocatalyst chemical technology and O3 chemical technology. It oxidizes. disassembles and combusts the various VOVs. odors and virus in a short time by generating the OH radical having the more powerful sterilizing power by 10 times than ozone. 2. Introduction 3. Characteristics - Low power cost - High deodorizing ratio by 90 – 99% - Using only electric energy. not needing warming-up time - Low maintenance cost and almost no consumable supplies - Solving the problems of remaining ozone and NOx - Automatic system - Not needing the ultraviolet rays lamp to generate the OH radical 4. Application - VOCs(Volatile Organic Compounds). industrial odors. sewage treatment plant. public buildings. smoking area. large-scale of septic tank. rainwater and sewage tank. indoor of livestock farm. livestock wastewater treatment facility. compost area and slaughterhouse |
Equipment |
| 1164 | Plasma Gasification & Melting System | GSPlatech Co., Ltd. | http://www.adplatech.com/ | 1. Outline The system uses plasma torch for gasification of organic contents of waste at over 1400℃ and produce synthesis gas. and slag melting inorganic contents. 2. Introduction 3. Characteristics - Able to treat various types of waste (domestic waste. industrial waste. sludge. coals. waste oil. oil sand. and others) - Applied long lasting electrode plasma torch - Meet regulatory reduction standards for environment such as dioxin reduction with simple washing equipment installation - Control bottom ashes and flying ashes which are environmentally harmful incineration residues - Ideal WTE (waste to energy) system as high value added to various resources (power generation. cogeneration. and hydrogen recovery. etc.) - Excellent economics: Need costs similar to constructing the incinerator - Economic operation costs 4. Application - Treatment target: all kinds of organic waste - Treatment capacity: Over 20 tons per day |
Technology & Process | |
| 1165 | Plasma Melting System | GSPlatech Co., Ltd. | http://www.adplatech.com/ | 1. Outline Inorganic waste is melted with high temperature plasma and is emitted as environment-friendly recycling slag which is in the form of glass crystal. In order to melt inorganic waste which has relatively high melting point. the system applies dual mode (non-transferred + transferred) plasma torch. 2. Introduction 3. Characteristics - Apply transferred or dual mode plasma torch (Operate in non-transferred mode before creating slag pool. and after creating slag pool. operate transferred mode) - High efficient treatment of waste during transferred mode operation - Maximize packing efficiency through metal and concrete treatment - Improved economic efficiency and safety by preventing isotope fly when applying to radioactive waste treatment 4. Application - Treatment target: Mid to intermediate level radioactive waste. incineration ash. asbestos. sludge and other inorganic waste - Treatment capacity: Over 1 ton per day |
Technology & Process | |
| 1166 | Plasma torch | Plasma torch | ADPLATECH Co., Ltd. | http://www.adplatech.com | 1. Outline - Plasma torch is basically hollow cathode structure. It prevents the corrosion of electrode by rotating the arc point in the electrode using swirl of plasma gas and rotating the arc point more speedier by Lorentz force caused by magnetic force by winding up the cable around the electrode. 2. Introduction 3. Characteristics - Simple and easy maintenance – available to use various plasma gas (nitrogen. oxygen. air etc.) - Forming magnetic field using electric cable – easy to change the generating power during the operation - Using the different line for each negative and positive anode 4. Application - Pyrolysis-gasification-melting facility of all wastes such as household wastes. industrial wastes. designated wastes. infectious wastes. and radioactive wastes - Hydrogen production through wastes treatment and generation plant for new and renewable energy - Nano-particle production. refining. and steel cutting etc. |
Equipment |
| 1167 | Pleated Cartridge Filter | SPN | Synopex Co., Ltd. | http://www.synopex.com | 1. Outline - PP Pleated Cartridge Filter from Synopex has continuous pleats with a maximum area and is a product designed for high flows. With a precise filter function and low differential pressure. it not only has a long product life cycle. but it also forms a perfect structure which prevents leak of solution through structural safety from heat adherence. There is no eluted substance or fiber deviation of filter materials or elution. 2. Introduction - Inside diameter: 30mm - External diameter: 69.5mm - Length: 250mm. 500mm. 750mm and 1000mm - Filtering materials: Polypropylene - Optimal exchange differential pressure: 2.0kg/cm2 - Maximum operation temperatures: 80℃ 3. Character - Gradient structure. - Micro-fiber in a melt-Blown format. - Complete heat-bonding combination and a self- supported structure. - No adhesives. surface active agents. - Various filter grades. - Efficiency in accurate and consistent removal of particles (more than 90%). - Long product cycle of filters. 4. Application - Pharmaceutical: Production of clean water. purification of reagents. and reverse osmosis pretreatment. - Photos: film development. printing and adherence solution. - Food and beverage - Chemical process - Oil and gas - Metal processing |
Equipment |
| 1168 | Plough Shear Mixer | Jangwoo Machinery Co., Ltd. | http://www.jangwoo.com | 1. Outline Various kinds of substances are mixed and spread by plough shape mixing blade which is attached inside the tank. It is a mixing device by mixing with chopper blade inside the tank in a short time 2. Introduction 3. Characteristics - It can have high quality mixed products in a short time. - It can mix small amount with various kinds of materials evenly. - It can add liquid to divisions. - It can get miniature and dispersion mix for all products. - It can have perfect dispersion mix with high-speed shear effect. 4. Application - Mix organic and non organic supply device of power - Mix pigment/dye and liquid resin - Mix resin with non organic matters - Mix abrasive and resin - Add mixture of cosmetics emulsion mix drug medicine - Mix powdered composition and seasonings - Mix pesticide emulsion and excrement - Mix neutralizing agent and polymer coagulant - Mix ceramic divisions. mix fine resisting materials |
Equipment | |
| 1169 | Plunger dosing pump | DK series | Dong-il M.T Co., LTD. | http://www.dongilmt.com | 1. Outline This product is used in extremely high pressure. The operating range of pressure is from 15kg/cm2 to 200kg/cm2. It designed to operate in high pressure. so that it has good life by long operation. The motor is 3 phase. 220/380v. The type is plunger metering pump. According to fluid type. material of head can be changed such as SUS304. 316. The range of capacity is from 25cc/min to 520 cc/min. but attach the head one more in parallel. capacity might be double 2. Introduction Features: 1) Plunger type pump 2) It works in high pressure(15kg/cm2 ~ 200kg/cm2) 3) it has good life by long operation. 4) It is possible to attach pump head in parallel. so that the capacity is double. It can be overcome the limit maximum capacity. 5) It is possible to adjust capacity automatically by attaching SERVO UNIT which gets information from PH meter. Spac: 1) Discharge capacity : 25cc/min ~ 1040cc/min(in cased of duplex head) 2) Material : SUS304.SUS316 3) Motor : 3 phase. 60Hz.220/380v.IP44(standard) 440V.50Hz. anti-explosion. waterproof motor in special order 4) 30% ~ 100 % adjust flow capacity 5) viscosity : below 300cp 6) operation temperature: SUS(0~80) 7) connecting type: screw type(standard). flange type(optional) 3. Characteristics - Simple. Economic Vertical type Metering pump by rationalis tic design. - Extremely good life by long operation. - Can be injected small volum of liquid with accuracy/ (Tolerance limits : ±1%) - Can be done transporting injection by high pressure (Pressure limits : 150 kg/㎠ Max.) - The range of effective adjustment stroke: 20% ~ 100%) - Using temperature : 0℃ ~ 100℃ - Using viscosity : Below 300cp - Room temperature for pump : 0℃ ~ 40℃ | Equipment |
| 1170 | PM10 Air Sampler | MiniVol TAS | APM Engineering | http://www.apm.co.kr | 1. Outline - Mobile PM10 and PM2.5 sampler 2. Introduction 3. Characteristics - Portable by small and light weight (4.5kg) - Sequential sampling for 60 hours by one charging (5 hours) - Available to use for 10.000 hours by double diaphragm pump - Applying FRM filter holder encouraged by U.S. EPA - Sampling time and cycle program is available by built-in timer. - Automatic stopping and displaying function in low flux and low battery - Available to sample PM10. PM2.5 and TSP 4. Application - sampling TSP. PM10 and PM2.5 of the air and indoor air - Main testing method to measure fine dust concentration of public facility - Measuring the concentration of flying dust in Environmental Impact Assessment |
Equipment |
| 1171 | PM10 Analyzer | PM10 Analyzer | Dongan Information Industry Co., Ltd. | http://www.dong-an.co.kr | 1. Outline The suspended particulates analyzer measures PM10. using b-ray. 2. Introduction A degree of attenuation in b particulates when passed through a predetermined medium is varied exponentially depending upon a thickness of material (mass density). Accordingly. a relationship l = lo e -mx is given. wherein lo is the strength of an initial b-ray. l is the strength of the b-ray after passing through the medium. X is the mass density of absorbed materials. and m is the attenuating coefficient of the b-ray. The attenuating coefficient m is generally 0.262 cm2/mg. but it is determined by use of a reference mass. If the l and lo are accurately measured using the b-ray detector. the value of the mass density x of the absorbing materials is determined. Using such the principles. the concentration of the suspended particulates in the air can be measured.(See table 1) 3. Characteristics 1) Designed under the environmental standards of EPA (Environmental Protection Agency) in U.S.A and the Ministry of Environment 2) Automatically measuring the air pollutions every day for a year 3) Easily applicable to domestic users 4) Simple basic setting by adding specific functions 5) Complete satisfaction to the user’s demands according to the program development in the company itself 4. Application Measurement of concentration of suspended particulates in the air | Equipment |
| 1172 | PM-10 Mini Air Sampler | FRM OMNI Sampler | KEMIK CORPORATION | http://www.kemik.co.kr | 1. Outline The PM-10 Mini Air Sampler FRM OMNI Sampler. designed to indicate actual flows and standard flows. received type approval from the Ministry of Environment. The device. characterized by small size and light-weight. is not just portable but also is capable of measuring temperatures in the range of maximum. minimum and average value. pressure and flow. In addition. the device is mainly used to capture PM10. PM7. PM2.5. PM1. and TSP in indoor and outdoor air conditions. 2. Introduction 3. Characteristics - Feature an EPA-recommended FRM Filter Holder - Make it possible to indicate and control momentary flows in range of two decimal digits - Ensure the use of specific PC software - Make it possible to transmit and output data [Text. Excel] via PC - Ensure flow software - Ensure the unmanned operation by featuring a solar power battery [Option] 4. Application - Capture PM10. PM7. PM2.5. PM1 and TSP in indoor and outdoor conditions - Capture minute dust concentration of a multi-purpose facility - Capture arsenic acid dust concentration when assessing environmental impact - Most suitably fit into the method of indoor air quality test in compliance with a standard testing method |
Equipment |
| 1173 | PM-10(fine dust) collector | PAS201 | KINE INDUSTRY | http://www.e-kine.com | 1. Outline - This PM-10(fine dust) collector is used to measure fine dust. carbon dioxide. carbon monoxide. HCHO(formaldehyde). VOC. radon. airborne bacteria. asbestos and nitrogen dioxide. etc. in houses and public use facilities. This collector is composed of a product that meets the indoor air quality process test method and a portable product. 2. Introduction 3. Characteristics - The collector is easy to carry because it is compact and lightweight (8.2kg). - 24 hour continuous collection is possible by charging the collector once (limitless continuous use is possible when AC is used). - Maintenance of stable flux with a diaphragm pump. - Adoption of a FRM filter holder which is recommended by the USA’s Environmental Protection Agency. - Collection time and cycle program through a built- in timer are possible. 4. Application - Measure TSP. PM10 and PM2.5 in the air. - Measure concentration of fugitive dust during environmental impact assessment. - Measure concentration of dust in the air in public use facilities and underground living space. |
Technology & Process |
| 1174 | PM-10(fine dust) meter | LD-3B | KINE | http://www.e-kine.com | 1. Outline - This meter is used to measure fine dust. carbon dioxide. carbon monoxide. HCHO(formaldehyde). VOC. radon. airborne bacteria. asbestos and nitrogen dioxide etc. in houses and public use facilities. The meter is composed of a products that meets the indoor air quality process test method and a portable product. 2. Introduction 3. Characteristics - Possible to indicate measured values by simply converting them to mass concentration after inputting mass concentration conversion coefficients in advance. - PM10 sampler type which is suitable for an indoor air quality test method. - Equipped with a record function(logging function) of measured data. - Diffuser value and BG value can be memorized even when power supply turns off. Dust measured values can be compensated automatically by using a diffuser value and a BG value. - Equipped with three types of data output - RS-232C interface. voltage output(0~1V). and no-voltage panel output (open collector output). - Automatic changes in measuring range are possible. - Mass concentration conversion coefficients of existing dust monitor LD-1 type can be used. - 3 power supply method (Battery. Ni-cd Battery. and AC Adapter ). 4. Application - Measurement of fine dust |
Equipment |
| 1175 | Pneumatic conveyer | Pneumatic conveyer | TAEKYUNG Co., Ltd. | http://www.tknt.co.kr/ | 1. Outline • This unit is a pneumatic conveyor optimized to transport sludge with reduced friction force. • This conveyor can uses compressed air to vertically and horizontally transport sludge cake. sand from settling tanks. and impurities that contain water via pipes. As a new form of pneumatic conveyor. it can be used for long-distance transportation without causing clogging problems. 2. Introduction 14Biz-53.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-53.JPG'>3. Character • It can transport cake or impurities even in complex when a pathways. • It is highly portable (vertical length: 40 m; horizontal length: 120 m). • It requires a small installation space and has a semi-permanent service life. • It operates automatically. providing ease of control. • It keeps the machine interior and the pipe clean with air and water to prevent clogging. 4. Application • Dehydrated cake • Screened impurities • Sand from settling tanks and impurities • Night soil and fine sand |
Eco-Friendly Products |
| 1176 | Pneumatic Conveyor | Pneumatic Conveyor | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - Pneumatic Conveyor is the most innovative one among transfer equipment. and transfers all kinds of impurities horizontally or vertically by using compressed air. and uses a narrow space and shows an efficient function. 2. Introduction 3. Characteristics - Transfer through complex piping arrangement - Easy installation and less installation space - Longer life span compared to other products - Clean surrounding of a transfer facility - Unmanned operation through automation - Excellent transfer capability 4. Application - Transfer of microscopic screen impurities - Transfer of a dehydrated sludge cake - Transfer of grit and water treatment impurities - Transfer of excrements and livestock impurities or livestock wastes |
Equipment |
| 1177 | Pneumatic conveyor | Pneumatic conveyor | Cheonbo Engineering | http://cheonbo.co.kr/ | 1. Outline - The most remarkable model among transfer facilities. Using compressed air this high efficient device is able to transfer various kinds of impurities horizontally or vertically in a limited space. 2. Introduction 3. Characteristics - Transfer through complex piping is possible. - Easy installation and small installation space. - Longer lifespan compare to other products. - Cleaner surroundings of transfer device. - Unmanned operation available through auto operation. - Excellent transfer capability. (Max. horizontal-90m. vertical-25m) 4. Application - Transfer microscopic screen impurities - Transfer dehydrate sludge cake - Transfer grit and water treatment impurities |
Equipment |
| 1178 | Pneumatic Pressure Calibrator ( KPG-C2000 ) | Pneumatic Pressure Calibrator ( KPG-C2000 ) | KIST Co., Ltd. | http://www.kistco.kr/ | 1. Outline - KPG-C2000. the country’s first pressure calibrator that has been developed with the homegrown technology. is a precision calibrator equipped with advanced technological features. KPG-C2000 is a pneumatic pressure calibrator capable of calibrating and gauging pressure and providing leak tests. As a portable pressure calibrator. the system is a light-weight and durable device and easily is applicable to industrial sites. In addition. it features a touch screen as well as a Hangul keyboard so that users can operate the machine more comfortably. It costs less to purchase and enables swift A/S. 2. Introduction 3. Characteristics - High precision (0.025% F.S for Ranges 200mbar to 20bar) - Easy to manipulate with a touch screen - Less likely to operate in an incorrect way through a built-in Hangul keyboard - Battery hours that may be extended to 8 hours in average - Able to send data saved in an USB to the PC - Capable of incorporating a pollutants removal filter that operate based on an one-touch fitting technique - Able to compensate temperatures 4. Application - Pressure calibrator |
Equipment |
| 1179 | Pneumatic Vacuum Conveying | Peritus Equipment Co. Ltd | http://www.peritus.kr | Easy dust free Conveying with inline process 1. Application & Process : The Vacuum transfer systemis unique dry material transfer system for dust free and avoid to human touch. Thevacuum transfer system is used in Pharmaceutical. Food. Agro Chemical. Sugar Industries and chemical. The system is use full for inline milling. sifting. blending. loading and unloading. The principle of vacuum transfer has been proven to be a better way to move many types of material and a giant step over manual handling. The technology exists for moving virtually any material that can be pulled through a hose or tube. The system is consisting of Blower. Vacuum receiver system with filter. cyclone filter and Pipe. The vacuum conveying systems designed specifically for the direct charge loading of blenders. mixers. sifter. milling. reactors or any vessel capable of withstanding a vacuum. The vacuum system can be provided mobile type with lifting provision to move one room to another room for loading and loading any machine. 2. Salient Features : •Design is cGMP - Current Good Manufacturing Practices compliance. •All contact parts AISI 316 & non contact parts AISI 304. •Capacity available 100 Kg to 5000 Kg/hr. •Can be used for transfer of products having bulk densities up to 1.0gm/cc. •Total Discharge no Retention. •No segregation or degradation of Product. •No tool required for opening & cleaning. •Transfer can be completely automatic to avoid the manual handling of the material •Fully automatic system. with timing controls and automatic air blow back system for filter cleaning. •Vacuum Blower and cyclone filter can be installed in out side production area. •Avoids product waste. loss and contamination. •Easy to clean and wash of contact parts. •Option for Inline Milling. Sifting with Blender and Loading material to RMG. Tablet press& Vessel. | Equipment | |
| 1180 | Polluted underground water treatment facility | Biosaint Co., Ltd. | http://www.biosaint.com/ | 1. Outline A technology applying gas-liquid equilibrium between gas and liquid. which purifies VOCs included in underground water to the level of domestic water through diffusion and stripping methods 2. Introduction 3. Characteristics - Less fouling and scaling. easy cleaning. convenient maintenance - Space saving. low maintenance fees - Able to separate and clean trays individually - Automated operation based on PLC program 4. Application - Underground water purification - Industrial process wastewater - Soil washing wastewater |
Technology & Process | |
| 1181 | Polyethersulfone membrane | PORPES | Absfil Co., Ltd. | http://www.absfil.com | 1. Outline - This PORPES Cartridge is made of PES polymers and is designed for eventually removing very fine particles to perfectly meet the needs of customers. The company improved the PES membrane pore structure which bears a hydrophilic propensity of its own and a high unbalance to make it possible to provide perfect filtration.. 2. Introduction 3. Character - High asymmetric pore structure. - Proper water quality management process - Hydrophilic propensity and excellently chemically suitability - ISO9001 certification - Meets biological characteristic bearing all polypropylene elements. 4. Application - Cell industry (LCD. PDP. AM-OLED. Solar Cell). - Ink. dye. treated water. acid and base - Drinking water |
Equipment |
| 1182 | Polyethylene Tape Canning Sheath | Polyethylene Tape Canning Sheath | Inno System Co., Ltd. | http://www.innosystem.kr | 1. Outline - Polyethylene Tape Canning Sheath. 2. Introduction 3. Character - Highly waterproof and chemical resistant - High insulation resistance - Adequate in extremely low temperature - Good for repairing work - No preheat needed. Ready in room temperature 4. Application - Gas pipe. oil pipe. water supply. industrial water supply and plant piping |
Equipment |
| 1183 | Polymer Dissolving System | Polymer Dissolving System | D.I tech | http://www.ditec.co.kr/ | 1. Outline • Adopting the system automatically dissolves constant and quantitative powder and granules with high fluidity to enable the specular density and excellent quality of dissolved polymer and to prevent the system from forming a fish-eye appearance. • The powder polymer stored in a hopper is fed to the dispersion mixer by a high-precision processed screw. mixed primarily in the dispersion mixer. and supplied to the dissolving unit. thereby preventing the formation of a fish-eye appearance of the polymer by a strong current. 2. Introduction 14Biz-81.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-81.JPG'>3. Character • Minimization of installation area and cost: a three-stage–partition separation. integral auto sequential dissolving system that enables the total completion of storage. supply. dissolution. retention. and discharge stages • Pharmaceutical cost-saving effect: constantly supplies a solution with specular density and good quality and reduces unnecessary pharmaceutical cost by adopting continuous and proportional supply • Easy to control. operate. maintain. and manage • Allows the voluntary control of concentration (0.05–0.5 wt. %) 4. Application • Prevention of environmental pollutants. such as polymers. activated carbon. calcium hydroxide. etc. • Paper and pulse industries • Polyacrylamide. sodium sulfate. and other industries |
Equipment |
| 1184 | Polymer Flocculant | Polymer Flocculant | OCI-SNF Company Ltd. | http://www.eyangchem.co.kr | 1. Outline - Yangfloc is a water soluble organic polymer flocculant to absorb suspended micro particles in the water and to form them in a cross-liked structure for flocculation and precipitation. It is used in a solid water separation process such as concentration. filtering and dewatering in waste water treatment and various industries. 2. Introduction - Classification of polymer flocculant - Yangflog is classified inro powder type and emulsion type by phase. Each type of Yangflof includes anionic. nonionic and cationic by iconicity of functional group. 3. Character - Hydrogen ion existing as a cationic structure in acidic water decreases electrostatic bonding between anion polymer flocculant and suspended material. - Difference of effect by pH is occurred as hydroxyl ion exists as an anionic structure in alkali range and deteriorates effect of ionicity polymer flocculant. - Although a binding capacity of nonionic polymer flucculant is weak. there is no change of flocculation effect by pH. 4. Application - Polymer Flocculant |
Instrument & Chemicals |
| 1185 | Technology for recycling PP/GF20% for the production of external car parts | Greenpol Ltd. | www.greenpol.co.kr |
1. PRODUCT DESIGN & CHARACTERISTIC
1) Polypropylene(PP) Compound
- Technology for recycling household packaging waste using solvent with particle disintegrating technology
- Development of deodorizing compounds for recycled polyolefin
- Development of electrically-conductive PP material
- Recycling technology for discarded vehicle bumper
- Production of vehicle accessory materials using plastic PP waste
- PP / GF compound
2. PERFORMANCE OF RANGE
- PP Resin with adjusted MFR rates (MFR: 10 ~ 15)
- High MI PP Resin (MFR> 20)
- Multiple PP for exterior automotive parts: resin for bumper (TPO)
- PP / Talc compound
- PP / GF compound
3. STRONG POINT
- Outstanding plastic recycling technology
- Consistent efforts to achieve product uniformity and outstanding quality
● Please refer to the following link for the more details:
|
Waste Management | |
| 1186 | Porosity Block Type Filter Basin Underdrain System | D.I ENVIRO | http://www.di-eng.co.kr/ | 1. Outline • This equipment maintains uniform pressure and homogeneous water distribution. under any operating condition. during the backwashing with air and water mixture of rapid filtration basin process. 2. Introduction 14Biz-24.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-24.JPG'>3. Character • Its assembly and installation process are simple. • It provides uniform air and water distribution. • A gravel layer is unnecessary as it uses an IMS cap. • There is no dead space or mud ball formation in the filter layer. • It has a low head loss. • It is an extremely low maintenance equipment. 4. Application • Water purification • Sewage treatment • First flush treatment • Reuse water treatment system |
Equipment | |
| 1187 | Portable Chlorophyll Fluorometer | Green Pioneer | 1. Outline • Portable Chlorophyll Fluorometer is a specialized facility that calculates and evaluates the total amount of photochemical energy. converted by photosynthesis. effectively and quickly. • Apply pulse-modulated measuring light for the selective detection of chlorophyllfluorescent brightening output. 2. Introduction 14Biz-475_Portable_Chlorophyll_Fluorometer.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-475_Portable_Chlorophyll_Fluorometer.JPG'>3. Characteristics • It provides extremely small. highly sensitive. and accurate measurement. • It requires simple operation. • Fluorescent brightening output (F) and the maximum output (Fm) are automatically measured to calculate photosynthesis. • Acquired data will be displayed on the screen for analysis in the future. 4. Application • Measurement of thephotosynthesis and fluorescence of various plants |
Equipment | ||
| 1188 | PORTABLE RTO | PORTABLE RTO | Hytech Eng | http://www.hy-tech.co.kr | 1. Outline - It is a heat exchange method as the regenerative heat and warming up are performed at the one heat storage by using the Crosswised Heat Capacitor. - At the W1 direction. the combusted wasted heat passes through and the heat is accumulated at the heat storage material. At the same time. the polluted air is flowed in the W2 direction and warmed up by the heat of the heat storage material. 2. Feature - Optimal to the space needing the small installation space - Saving the cost by miniaturizing the main body - Optimal to the facility of the emission amount below 30㎥/min - Always securing the regular and high removal efficiency - No pulsation by the pressure change - Easy operation and maintenance - Available of leak removal efficiency more than 99% by minimizing the gas leakage 3. Introduction 4. Application - Wastes treatment facility - Sludge-drying facility of sewage disposal plant - Electricity and semi-conductor industry - Painting industry - Film-making process - Gravure printing process - Petro-chemical industry - Food and medicine making industry - Industries producing various organic solvents and odors |
Equipment |
| 1189 | Portable toxic gas detector | Satellite PGD | Honeywell Analytics Co., Ltd | http://www.honeywellanalytics.co.kr | 1. Outline - It is designed for detection of toxic and corrosive gases and comprises of 2 essential components. the module using integral pump for sampling of gas. and the gas detection module for direct monitoring using a sensor extension cable. 2. Introduction 3. Characteristics - Able to be used for both extractive or in-situ - Double level gas alarms - User adjustable alarm levels - Audible and visual alarm indicators - “Plug and Play” smart sensor system - Support LonWorks? or 4~20mA output - Self-diagnosing sensor 4. Application - Emergency response teams - Gas leaking locations - Equipment maintenance sites - Gas replacement equipments - R&D laboratories |
Instrument & Chemicals |
| 1190 | Portable Wearable Air Purifier/WAP-10 | Portable Wearable Air Purifier/WAP-10 | <DIV> </DIV><DIV> </DIV><DIV><B>Possible to USB charge. removal fine-dust. pollutant by HEPA filter and negative-ion purified method.</B></DIV><DIV> </DIV><DIV><br>Feature : <br>1. By applying HEPA filter. inhale the contaminated air and supply clean air.<br>2. By Secondarily generating negative-ion. it removes the residual contaminants and directly supplies purified air.<br>3. With effectively removing the harmful elements for human body. it is an active air purifying device which directly supplies purified air to end-user’s nose.</DIV><DIV> </DIV><DIV> </DIV><DIV>- Size : 250*55*270mm<br>- Weight : 230g<br>- Battery: 2.600mA rechargeable lithium-ion battery<br>- Wind volume : 50m/h<br>- Negative-ion generation rate : 150million/30cm <br>- Charging time: DC5V/1A (about 4 hours)<br>- Power consumption : 1W<br>- Operating time: <br> 1Stage(negative-ion) – approx. 26 hours.<br> 2Stage(negative-ion & airpurifying mode) – approx. 13hours.<br>- Origin: KOREA<br>- Product classification : Portable Air Purifier </DIV><DIV> </DIV><DIV> </DIV><DIV>- Wearable Air Purifier which is easy to carry on.<br>Wearable device. which is possible to remove the contaminants such as dust. pollens etc. anywhere by wearing it on the neck.(suitable for various users such as office. subway. car-driver etc.)</DIV><DIV>- A simple recharging type.<br>Available to charge and use by applying large capacity lithium-ion battery with USB charging method.</DIV><DIV> </DIV><DIV> </DIV> | Air Treatment | ||
| 1191 | EMERGENCY DRINKING WATER(Sea & River) | Hyundai Wacor Tec. Co., Ltd. | EMERGENCY DRINKING WATER(Sea & River) Potable Water Purification System EMRO-20S can supply maximum 90 liters per hour of the treated water from Seawater. and maximum 200 liters per hour of the treated water from River & Lake. * Applications Therefore. it is very suitable for countermeasures against natural calamities and water supply during warfare. * Features Reverse Osmosis Systems with Maximum capacity EMRO-20S can supply maximum 90 liters per hour of the treated water from Seawater. and maximum 200 liters per hour of the treated water from River & Lake. Easy to maintain. This system have Reverse Osmosis filtration system are easy to maintain. Compact Design & Size Compact enough to be mounted onto a vehicle. Parts and components that make up the system are made of stainless steel and are highly resistant to corrosion. This single-body system does not require any additional devices. which can be operated without outside power supply. | Energy | ||
| 1192 | Power Saving System | Ener Keeper Solution 1 | Enertech Co., Ltd. | http://www.enerkeeper.com | 1. Outline - A system to supply power of improved the electricity quality by reducing harmonic wave and imbalanced/reactive power generated by nonlinear load. 2. Introduction 3. Characteristics - Reduce the power loss by offsetting the harmonic wave and imbalance generated in the load through phase control with zigzag coil winding produced by ATW (Auto Transformer Winding) patented technology - Semi-permanent product of 15~20 year lifetime with minimized defect factors of core & coil structure - Enhanced the durability without using semiconductor nor capacitors - Safe as of automatic by-pass within 0.08sec when inflow of overload or fault current - A product that can be installed on the output side of transformer or breaker regardless of load types - Superior efficiency in multiple loads 4. Application - Increase of facility efficiency and reduction of electricity cost in factory. school. public organization. hotel. etc. |
Technology & Process |
| 1193 | POWER SHREDDER | POWER SHREDDER | Hankook P.M Eng Co., Ltd. | http://www.topcrusher.co.kr | 1. Outline - Materials are crushed by cutter independently operated with separate motor and speed reducer - Cutters facing each other with two axis located in parallel - Cutter that pulls and cuts using shear force axial force and friction force 2. Introduction 3. Characteristics - Torque increases dues to rotation using two axis. Boasts powerful crushing and shredding - Power increase/decrease depending on materials crushed - Shredder cuts with separate rotation speed - It is possible to easily process even large materials without pre-shredding - It covers almost all waste materials ranging from large size waste to industrial waste - Super-power speed reducer suitable for shredder guarantees less noise and safety - When materials put inside the machine exceeds its capacity to crush. the machine stops working for a few seconds by power control and then rotate two axis in a reverse manner and then rotate in a right direction again. Thanks to overload detection system. the machine stops working after getting a signal to check foreign substances when rotation and reverse rotation are repeated for several times. 4. Application - Cars. municipal waste. waste tire. waste rubbers. scrap paper. fiber glass. asbestos. bones. animals used in tests. leather. radioactive and industrial waste. electronic devices. office supplies. furniture. bed with springs. used logs. used bicycles. car bumper. aluminum. waste plastic (regardless of size). waste barrel. waste plastic bags. waste fabric. aluminum foils |
Equipment |
| 1194 | Pre-fabricated River Purification System | Pre-fabricated River Purification System | Centennial Technology Co., Ltd. | www.centechnology.com | 1. Outline The river purification technology using a plate-type contacting filter with artificial water plants has a good biological oxidation decomposing capacity than other technologies as it has a broader contacting surface with rivers. and microbes easily stick to its artificial water plants. At the bottom of the plate-type contacting filter. there is an integrated setting tank where the sludge containing seceded microbes can be sedimented and concentrated. The plate-type contacting filter is easily moved and installed with the size of 1mx 1m x 2m. The whole system is designed to be remote-controlled in order to maximize the convenience of maintenance. and the sludge is periodically pulled out automatically. 2. Feature - Rapid construction and cost saving - Easy to change the design according to the condition of the construction site - Easy to build because of a module structure - Convenient maintenance - Convenient design - High penetration rate - Price competitiveness - Suitable for a purification facility of small rivers - Facility scalability and mobility 3. Introduction 4. Application - Water purification |
Technology & Process |
| 1195 | Pressure densitometer | OHK Co.,Ltd. | http://www.ohk.co.kr/ | 1. Outline - Ultrasonic electric densitometer measure the concentration of sludge which is mixed with air from pumps and methane gas from raw sludge. It can get more accurate result by pressing. 2. Introduction 3. Characteristics - Electronic system(No compressed air needed) - Compact and light control panel(1/8 of existing size) - Use control power - No noise. use less electric power(1/8 of existing electric power use) - No construction or air piping needed - Simple maintenance - No bypass piping needed - Cleaning censor is not needed (non-liquid method) 4. Application - Pressure densitometer |
Equipment | |
| 1196 | Pressure Filtration Apparatus | Pressure Filtration Apparatus | Dongyang ENG & Entis Co., Ltd. | http://watersos.co.kr | 1. Outline - First no-filter-replacement pressure filtration apparatus in Korea. 2. Introduction 3. Character - No filter replacement required. - Minimum environmental waste. - No chemical used. - Low maintenance cost. - Recyclable and reusable filter. - Wide control range of pore size (00005-50um). - Suitable for turbidity removal in industrial water. waste water and polluted water treatment. - Suitable for treating industrial water and sewage with high acid/alkali resistance. 4. Application - Pressure filtration apparatus. |
Equipment |
| 1197 | Pressure flotation tank | Pressure flotation tank | DONGSHIN EN-TECH Co., Ltd. | http://www.sdaf.net/ | 1. Outline - This pressure flotation tank produced by DONGSHIN EN-TECH Co.. Ltd. can gain high surface loading as bubble particles are fine and they are can be attached to floc easily and can minimize effective depth of water as it has short residence time. In addition. power of a pressure pump can be saved as a bubble generator has a good performance and concentration of bubbles is high and can treat a lot as some circulated water is discharged as treated water and can save a space as the tank does not require a wide area to be installed and residence time in a flotation tank is short. 2. Introduction 3. Characteristics - Features of a circular pressure flotation tank ㆍBetter flotation speed and throughput efficiency than other pressure flotation tanks ㆍWide space is not required to be installed. ㆍWeight of the machine is light as tank capacity is small due to short residence time in a tank. ㆍSuitable to treat general industrial wastewater - Features of a square pressure flotation tank ㆍSuitable for the shape of a site to be installed ㆍThroughput is suitable for a large capacity ㆍFlotation tank for treating waterㆍsewage has a concert structure ㆍA small square pressure flotation tank is suitable for an industrial wastewater disposing box - Sand filtration type pressure flotation tank ㆍFlotation and sand filtration are possible at the same time which makes it easier to make good use of space ㆍReliable performance can be guaranteed as a sand filtrating device is installed at the bottom of the tank ㆍSuitable for medium sized waterworks. simplified waterworks and equipment to purify industrial water and lake water. 4. Application - Pressure flotation tank |
Technology & Process |
| 1198 | Pressure Transmitter | Differential Pressure Transmitter - DPX | Daho Tronic Co., Ltd. | http://www.daho.co.kr | 1. Outline - This Differential Pressure Transmitter is a differential pressure sensor that measures the pressure from a high pressure gauge and a low pressure gauge at two pressure measurement units and then changes difference of the measured pressure into an electrical analog signal and then transfers the signal. 2. Feature - This product can gain both difference pressure signal (1…5Vdc) and the signal (4…20mA) about the static pressure at high pressure (4…20mA). - As the material of the pressure sensing unit is SS316L. this product can be used to measure almost all kinds of fluid pressure used in the industry - As this product employs a Piezoresistive Sensing Method. it gains a stable and precise output value. 3. Introduction 4. Application - Pressure Transmitter |
Equipment |
| 1199 | Pressurized Fine Filter | Sungwoo Co., Ltd. | http://www.sww.co.kr | 1. Outline Water is filtrated by passing through double membrane filter bag and filtration membrane between several filtration plates. and the filtration efficiency has been maximized with the inclined plane inside filtration plate. It is the system for simple filtration process and improved filtration efficiency constituted with the valve specifications for the processes of pressure pump for raw water inflow. water purification and backwash. 2. Introduction 3. Characteristics - It is constituted with multi stage filtration plates filled up with fine filter and filtering materials to secure maximum contact area in the minimized space. which is more compact and light than conventional filtration systems. It can be used in wide and various applications according to the selection of fine filter gap and filtering material types. 4. Application - Emergency water supply facility - Water purification facility - Water supply facility - Rainwater treatment and reusing water facility |
Equipment | |
| 1200 | Pressurized precoat filter. | Pressurized precoat filter. | Dongil Chemical Co., Ltd. | http://www.dongilchem.com | 1. Outline - A system which perfectly excludes fine particles over 0.5㎛ by circulating solutions containing coating filter media such as diatomite. cellulose. and activate carbon to make a precoating layer in the filter elements outer wall. and passing the solutions through it. 2. Introduction 3. Character - Maximize efficiency by way of the flash air-water back washing. - Nano filtration of fine particles with a size 0.5㎛. - Semipermanant use of filter cloth without changing filter element. - Minimize operating and maintenance expenses by minimizing undiluted solution losses. - Compact enough to setup in narrow space. - Full automatic system. - Can handle up to 5 0㎥/ hr. per machine. - Efficient improvement of SS. COD and turbidity and elimination of colon bacillus and yeast fungus. etc. - Maximize efficiency by way of the perfect back washing. 4. Application - Tunnel constructions waste/turbid water filtering. - Filling stations automatic car wash. - Eliminating/filtering colon bacillus. and improving turbidity in the simple purification plants. - Circulation filtering swimming pool water. - Filtering of industry water. underground water and waste water. - Filtering of waste water disposal plants’ treated water recycling water - Recycling radiator’s FLUX circulating solution. - Recycling ceramic & ultralight grinding’s circulating solution. - Recycling cooling water’s circulating solution & ultrasonic wash liquid. - Recycling food-related circulating solution. - Recycling hard chromium plating’s circulating solution. - Recycling pretreatment fat-removed circulating solution for plating. - Pretreatment solution. phosphate coating / surface polishing circulating solution. - Rolling oil (copper. STS. aluminum)’s recycling. - Food processing: colon bacillus / yeast fungus / mold fungus elimination & turbidity improvement. - Filtering / purifying activated carbon treatment water and electroplating filtered water. - Filtering in the seawater-using industry. large aquariums & fishing nurseries. |
Equipment |
반응형
'놀면서 일하기 > 창업 아이디어링 + 문서' 카테고리의 다른 글
| 환경산업 관련 제품 및 기술 목록 : 1401-1600 (0) | 2023.12.25 |
|---|---|
| 환경산업 관련 제품 및 기술 목록 : 1201-1400 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 801-1000 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 601-800 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 401-600 (0) | 2023.12.25 |
댓글