728x90
반응형
35x34x25.5cm
https://s.click.aliexpress.com/e/_DEHcyIF
11.02US $ 69% OFF|Fire Pit Outdoor Table Camping Folding Stove | Camping Barbecue Grill Folding Table - Outdoor Stove & Accessor
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
환경산업 관련 제품 및 기술 목록 : 201-400
| NO | 제품명 | 모델명 | 회사명 | 홈페이지 | 내용 | 카테고리 |
| 201 | Big Bag Filling System (FIBC) | DBP500~DBP2000 | Duk Young Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Outline This facility admeasures quantitatively and loads raw materials in a large bag without any dust particles. 2. Introduction 3. Characteristics - Filling by admeasuring raw materials quantitatively - Loading is possible from 5 tons to 70 tons an hour. 4. Application - Big Bag Filling System (FIBC) |
Technology & Process |
| 202 | Bin Activator | DBA600 - DBA2400 | Duk young engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Outline It prevents bridge or rathole problems inside silo(hopper) by installing this device on the bottom part of silo or hopper. 2. Introduction 3. Characteristics - Any divisions can discharge consistent amount stably. - It can emit without separating the mixture. - Preprocess and election inside silo (hopper) - The outlet of silo (hopper) can be enlarged that the height is taller. 4. Application - Preventing bridge or rathole problems |
Equipment |
| 203 | Bio Colony | Bio Colony | Daeil Environmental Technology Institute | http://www.daeilenv.co.kr | 1. Outline - Bio Colony is an eco-friendly decontaminant in which bacillus is adsorbed onto zeolite. improving air and sediment quality. 2. Introduction 3. Character - Can be used in deep waters. The sand powdered Bio Colony can be used in port. lake. mud flat. or dam. sinking to the sea floor to decompose sludge. purify waste water. and remove odors. - Lower investment and labor costs since it utilizes a simple spraying method. - Can be used for both sea water and freshwater. - Can store for six months at room temperature. - Inactive microorganisms can be kept for approximately 6 months at room temperatures. Once activated. they naturally grow and die in 15-30 days. - Stay purified for 6 months after spraying. 4. Application - Bio Colony. |
Eco-Friendly Products |
| 204 | Bio deodorizer | WISEENTECH Co., Ltd. | http://www.wtcom.co.kr/ | 1. Outline - Bio-deodorization system decomposes odor and VOC materials into carbon dioxide and water with microorganism. Oder/VOCs+O₂⇒CO₂+H₂O+Biomass+Heat - This system consists of special MEDIA mixed with flint fire stone carrier. which controls PH for neutralizing oxygen and microorganism. and special porous ceramic carrier. It is devised for developing microorganism for cleaner environment. 2. Introduction 3. Characteristics - Clean environment for microorganism by using porous ceramic carrier and flint fire stone carrier - Long-lasting operation by simplifying machine structure - Specific surface area of Bioflim. attached to porous ceramic carrier. is broad and provides moisture for microorganism. - Flint fire stone carrier controls PH for neutralizing oxygen and microorganism - Processing efficiency for high concentrated polluted matters : In case of hydrogen sulfide. it can be over 100ppm. - Deodorize with less amount of water. compared to existing bio filter - Can be installed in the area at a height of 2.0m without self supporting of culture product→interior buttress : reduce the installment area - Simple microorganism inoculation : simple inoculation with upper manhole inoculation or water tank - Self-supporting culture products → microorganism is not eliminated easily from filter media - Deodorize with less amount of water. compared to existing bio filter → minimize the amount of waste water 4. Application - Bio deodorizer |
Instrument & Chemicals | |
| 205 | Bio Energy Business | Bio Energy Business | Samsung C&T Corporation Trading & Investment Group | http://www.samsungcorp.co.kr | 1. Outline - Samsung C&T Corporation actively promotes an solar power. wind power. hydrogen fuel cell and eco-friendly new renewable energy business in order to prepare for an era of resource depletion and protect future earth environment. 2. Introduction 3. Character - Bio Diesel & Bio Ethanol Samsung C&T Corporation has entered into a bio diesel business through the purchase of a palm plantation. The palm plantation in Indonesia is 24.000 ha which is equivalent to 40% of the size of Seoul City and has facilities that can produce more than 100.000 tons of palm oil which is an ingredient of bio diesel. We supplies palm oil possessed by the palm plantation to companies related to bio diesel and plans to expand oil refining business. 4. Application - Bio energy business. |
Eco-Friendly Products |
| 206 | Exen, Inc | http://greatexen.com/ | * Product Exen’s biofiltration odor control system is utilized in approximately 200 environmental facilities such as sewage. wastewater. and livestock wastewater disposal plants. The self-developed sulfur-oxidizing bacteria (SOB) has a proven ability to remove malodorants. while its ceramic media ensure its outstanding durability. * Application sewage. wastewater. livestock wastewater disposal plants | Equipment | ||
| 207 | Bio Filter Deodorization system | Bio Server™ | Jeongbong Co., Ltd. | http://www.jeongbong.net | 1. Outline - One of biological treatment methods of contamination substances in the gas. which is an economical environment friendly treatment engineering method to dissolute the contamination substances into water. carbon dioxide. and harmless salt by microbe’s metabolic activities that has fixed in the porous organic/inorganic multiple carrier. 2. Introduction 3. Characteristics - Bio filter system can remove the mixed odorous gas generated in the business site effectively by microbe fixed on the organic/inorganic carrier - Initial reaction time is very short in the bio filter system as appropriate microbe is fixed on the carrier and applied in the system 4. Application - Wastewater treatment plant. wastewater sludge treatment process. polluted/waste water treatment plant. livestock wastewater and excretion treatment plant. manure making facility. food waste treatment process - Cigarette production factory. food processing factory. feedstuff factory. waste storage & treatment facility. agricultural/fishery wholesale market and joint market - VOCs generating sources |
Equipment |
| 208 | Bio Gas generator system | Bio Gas generator system | Eco Solution Corp | http:// www.ecosol.co.kr | 1. Outline It is a power generation system using gas from organic waste reclamation n sit. constructed in tank type. it is easy for installation and relocation. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000257-2.jpg></center> <Fig 1. System diagram of Power generation system treatment using Reclamation site gas> 3. Characteristics (1) Maximize movability (minimize system investment risk); Tank type movable system (2) Flexible site adoptability; various modular types according to capacity and gas volume (3) Easy installation and deconstruction; minimize extra facility installation enabling installation and deconstruction in short time (4) Remote control system; efficiency operation environment possible by developing GTC (Gas Tele-control) system 4. Application (1) Landfill Gas; Provide financing lease service for efficient resource utilization. Prompt service provided (2) Bio Gas; replacement energy development waste treatment using reclamation gas of the organic waste. (3) Sewage Gas; heating resource use by collecting wastewater digestion gas (4) Coal Mine Gas; Energy conversion of gas generated from mining site | Equipment |
| 209 | Bio Gas Plant Project | Bio Gas Plant Project | ShinYoung Greensys Co., Ltd | http://sygreensys.com | 1. Outline - The project involves the establishment of the stable. cost-effective and package treatment system by putting in place an aerobic fermentation technology aimed at all kinds of organic waste materials. including food waste. livestock excretion. sewage or sludge. thereby contributing to nourishing the growth of the company specializing in new and renewable energy and global environmental policy. 2. Introduction 3. Character - Upgrade of reaction speed by increasing an area where bacteria can contact matrix. - High digestion rate by securing a constant staying period involving once-through type of flows. - Compact digestion tank that shortened a staying period through a high loading space of solid materials. 4. Application - Treatment of waste materials. |
Equipment |
| 210 | Bio Materials | Bio Materials | H-Plus Eco., Ltd. | http://eng.hpluseco.co.kr/ | Bio Materials H-Plus Eco provides the comprehensive service for customers by using the biomaterials for soil remediation. wastewater treatment. non-degradable contaminant treatment. and heavy metals removal. .JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/1(7).JPG'>Product name : B52 (Bio-zyme B52) The special features of product - High activity at low DO concentration - The microorganism by naturally-adapted microbial culture - High-efficient removal of high TPH concentration Applications - in-situ/ ex-situ soil bio remediation - bioreactor - soil washing / soil flushing - Tank cleaning - Land farming and wastewater treatment |
Instrument & Chemicals |
| 211 | Bio Odor Abatement | Bio Odor Abatement | WISE EnTech Inc. | http://www.wiseentech.com | 1. Outline The Bio odor abatement system is designed to break down odors and VOC substances into harmless carbon dioxide and water with the use of microbes. The system consists of a special MEDIA combining special multi-porous ceramic carrier aimed at facilitating microbes’ insertion with a limestone carrier designed to control PH to offset acid gas and smooth microbes’ activity. Thus. the system provides optimal conditions for the growth of microbes. 2. Feature - Provide an optimal condition for the growth of microbes using multi-porous ceramic carriers and limestone carriers. - Facilitate long-term use by simplifying mechanical operation and minimizing a possibility of disruptions. - Allow bio-film to have an extensive specific surface area and provide sufficient vapors needed to sustain the growth of microbes. - Allow a limestone carrier to control PH that is needed to offset acid gas and sustain the growth of microbes. - Remove odor by using smaller size of a water purifier than the existing bio-film. -Require a smaller area for the installation due to the culture’s own bearing power which obviates the need for internal buttress and allows the facility to stand two meters high or more on its own. -Make it easier to inoculate directly through the manholes on the upper side or a water tank. -Make it difficult to separate microbes from filter media -Minimize waste water. 3. Introduction 4. Application - Decomposition of odor and VOC substances |
Equipment |
| 212 | BIO Oxygen | BIO Oxygen | Seungjin Engineering Co., Ltd | http://sjengin.cafe24.com/ | 1. Outline - The free electrodes discharged from electricity through glass electric tubes are observed into oxygen molecules when they pass through a bio-oxygen body. Once oxygen molecules absorb free electrodes. they lose energy and temperature. creating oxygen colonies as they intrinsically are combined into oxygen mass driven by a magnetic force. The oxygen masses react with elements causing odor in the polluted air and particles to remove a variety of odor and bacteria. 2. Introduction 4. Application - Odor treatment |
Equipment |
| 213 | Bio Settler | FINE Inc. | http://fine-tec.com | 1. Outline • Bio Settler is an ultracentrifuge used to separate solid or liquid with a small specific gravity difference 2. Introduction 14Biz-442_Bio_Settler.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-442_Bio_Settler.jpg'>3. Characteristics • Centrifugal effect of up to 20.000G • Automatic discharge of sinking cake and wet cake • Biohazards minimization • Corresponds to the specifications of GMP. CIP (dipping wash). and SIP 4. Application • Fine chemical fields (medicines. food. electronic materials. etc.) • Bioprocess field (separation of spawn in culture solution) |
Equipment | |
| 214 | Bio-Ball filtration system – floating particle elimination | Bio-Ball filtration system | Chungsoo water treatment Corp. | http://www.chungsoo.com | 1. Outline Bioball filter can be used instead of sand filter and micro filter to eliminate SS existing in the inflow or effluents and is especially appropriate for the use of treatment of active carbon filter and membrane plate. It handles perfectly handles reverse efficiency problems of the previous sand filters proving to be easy-to-use fully automatic filter for consuming small amount of water and short time. 2. Introduction Bio-Ball Filter is pressure method filter. It fills CHIp to the closed SUS and SS-400 filter then treatment water is pushed in by a pump to be filtered by punching pressure plate with a degree of pressure. Bio-Ball Filter is a half-continuous filter and it is designed to perform filtration and reverse treatment after confirming by experience where treatment water quality is higher than the target water quality after establishing the target water quality. Period can be varied depends on degree of treatment water quality and it is designed to operate under regular interval of period based on the set treatment water quality standard. 3. Characteristics 1) Outstanding performance of SS elimination process by compression filter method using special fiber ashes 2) Increase efficiency by simultaneous supply of air and water 3) Special fiber ashes can be used permanently 4. Application 1) Sewage/wastewater treatment of high SS content (Over Filtration efficiency 90%) 2) Treatment system installation of active carbon and detailed filtration system 3) Applied to Membrane system and fresh water treatment system | Equipment |
| 215 | Biocera Antioxidant Alkaline Filter | Biocera Antioxidant Alkaline Filter | BIOCERA | http://biocera.co.kr/ |
- Features of BIOCERA Antioxidant Alkaline Filter
What are Active Oxygens (Free Radicals)?We breathe air by inhaling oxygen. As we breathe a small number of active oxygens are created. Active oxygen. in other words. free radicals steal electrons from healthy cells causing the imbalance in the body. Unbalanced health cells turn into free radicals leading our body to various diseases such as diabetes. hypertension. Alzheimer’s diseases. constipation. and more diseases.
How to prevent from harmful active oxygens?BIOCERA Antioxidant Alkaline rich mineral water has essential minerals such as calcium. magnesium. potassium. and sodium that are important mineral for our body. It is important to choose the right water. Choosing the right water will improve your metabolism and maintain health. To know more information. check http://biocera.co.kr/drjeonhealthinfo target=_blank>Dr. Jeon’s Health Info page.
|
Air Treatment |
| 216 | Biocera NS - Nano silver liquid type | Biocera NS - Nano silver liquid type | BIOCERA | http://biocera.co.kr/ | <h2> </h2> <div class=std> <h2 class=productTitle1 emColor3>Antibacterial Nano silver liquid type</h2> <ul class=productTxt2> <li>Transparent liquid</li> <li>Combined with activated Carbone. textile or pulp</li> <li>No nitrates included in the liquid</li> <li>No change in its color to the UV</li> <li>Strong antibacterial durability</li></ul></div> | Water Treatment |
| 217 | Biocera Photocatalyst Filter | Biocera Photocatalyst Filter | BIOCERA | http://biocera.co.kr/ | <div>Details</div> <div> - Item : Biocera Photocatalyst Filter</div> <div>- Type : Carbon Urethane </div> <div>- Size : 1M x 2M </div> <div>- Thickness : 3㎜. 5㎜. 10㎜</div> <div>- PPI : 35. 30. 45</div> <div> </div> | Water Treatment |
| 218 | Biocera T - Photocatalyst | Biocera T - Photocatalyst | BIOCERA | http://biocera.co.kr/photocatalyst-bioceara-t.html | <h2>Details</h2> <div class=std> Photocatalyst acts as an oxidizing agent when activated by ultraviolet ray. especially sunlight. When a photocatalyst titanium dioxide (TiO2) captures ultraviolet light (from UV-A to UV-B widely and 350~380 nano meter is the most efficient range of UV) it forms activated oxygen from water or oxygen in the air. This process is similar to photosynthesis. in which chlorophyll captures sunlight to turn water and carbon dioxide into oxygen and glucose. The activated oxygen is strong enough to oxidize and decompose organic materials or smelling gas. and kill bacteria. Our photocatalystic titanium dioxide is capable of decomposing various ingredients that produce odors. mainly organic compounds. into carbon dioxide and water by light irradiation </div> | Water Treatment |
| 219 | BIOCERA Washing BAll | BIOCERA Washing BAll | Biocera Co. Ltd. | http://biocera.co.kr/ | <DIV><B>Product Description</B><br><br> If you use Bio cera Laundry washing ball. You don't need to use detergent or fabric softner again! Inside the ball. there are Nano Technology Ceramic Balls that have Negative-ion and Far-infrared rays. <br> Water surface tension is reduced. making water molecules smaller which allows it to move through fabric and clean out soil and dirt.<br> Product Feature<br><br> ADVANTAGESSave water.electricity.time.and money Replace detergent & softener – lothes remain clean & hygiene.Deodorant.anti-bacteria.and HYPO-ALLERGENICEspecially good for babies No harmful chemicals in water after laudry-no pollution Last up to 1000 washes Company that led the eco laundry of balls as proven by the FDA recognition. KFDA registration. NSF test passed. etc.. BIOCERA Ceramic Balls are of the best qualityThe world’s first bioceramic ball in1994 by Dr.Jeon(Biocera’s CEO)<br><br><B>Product Specification / Models</B><br> Product Name: Biocera Washing Ball (For Drum and general Washing Machine)<br> Usage: For laundryMain<br> Components: Body - SEBS Biocera Green Laundry Ball. far infrared ray Ceramic Ball <br> Size/Weight: 100X90mm/200g <br> Life time : 2 ~ 3 years when use it one time per 1 day <br></DIV><DIV><B>Application</B><br><I>How to Use<br></I>1.Just do your Laundry as you normally would.<br> 2.Use two sets of Biocera Washing Ball to enhance the washing effect when the laundry exceeds 8.5kg.<br> 3.Dry Biocera Washing Ball for better performance and the longer life of the ball after the laundry if possible<br> 4.Biocera Washing Ball has softening and bleaching effect itself. But you may use together with softening or bleaching materials.<br> 5.In a normal situation. the effect of the Biocera Washing Ball will last for the two or three years after the first use.</DIV> | Eco-Friendly Products |
| 220 | Bio-CircleTM compact | Bio-CircleTM compact | Jason Ltd. | http://blog.daum.net/jasonltd | 1. Outline - This Bio-CircleTM compact is a water-based cleaner using natural microorganisms to rapidly dissolve oil and grease into water and carbon dioxide. The system maintains cleanness of a cleanser guaranteeing a substantial lifespan. 2. Feature - Excellent cleaning performance - Fresh odor - Easy to operate - No need of waste disposal - Anti-rust additive contained - Optimized bio-cleaning treatment 3. Introduction 4. Application - Machinery parts cleaning |
Equipment |
| 221 | Bioclay | HANKI | http://www.hanki.co.kr | 1. Outline • A system that biologically ferments waste. such as sewage. water purification sludge. and so on. to use it as compost or molding materials 2. Introduction 14Biz-133.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-133.JPG'>3. Characteristic • Reduces follow-up management cost by stabilized aerobic drying and fermentation with low fuel cost - Saves on electricity bills and fuel cost by 30% compared to other companies • Designed to have high efficiency to reduce installation cost - Saves on equipment cost by about 20% compared to other companies • Easy transfer and operation because of the simple installation process; saves on follow-up management cost • Reduces the fermentation time through stabilized aerobic fermentation • Minimizes odor generation amount by return rank odor • The best materials for fertilizer and molding materials 4. Application • Sludge treatment |
Equipment | |
| 222 | BIO-COMPOSITE SYSTEM | BIO-COMPOSITE SYSTEM | Wooran Engineering Co., Ltd. | http://www.wooram-eng.com | 1. Outline - It is a completed decomposition system using methanation digestion and anaerobic treatment method. - By-product produced during the treatment process is used as alternative energy or a liquefied fertilizer. 2. Introduction 3. Characteristics - Small amount of sludge emission - Recycling methane gas (biogas) - Using the liquefied fertilizer produced by methane treatment as compost - Recycling the final treatment water as cleaning the pigsty - Easy operation - Cheap maintenance cost 4. Application - Livestock excreta - Pigsty excreta - Cleaning water for pigsty |
Technology & Process |
| 223 | BIOCOVER | BIOCOVER | Exen Environmental Inc. | 82-31-403-8338 | 1. Outline - BIOCOVERAN is world’s first revolutionary biocover system which combines the unique biofilter with an integral tank cover to prevent the odor diffusion to completely control odor from odor sources. Applications of BIOCOVERAN are a distribution tank. a setting tank. a reactor. a digestion tank. and the cover for a biological reactor in wastewater treatment plants. BIOCOVERAN is a biocover odor control system that can be installed directly at a tank to remove odor. 2. Introduction 3. Characteristics - Cost effective due to a combination of the cover for deodorization and a biofilter. - Making appearance beautiful is possible. - Good capability of treating malodor even in winter. - Easy to applied to existing covers for deodorization 4. Application - Control of malodor and prevention of diffusing malodo |
Technology & Process |
| 224 | BioCrack | BioCrack | Vogelsang Korea | 1. Outline • BioCrack upgrades the performance of a sewage treatment plant and helps the bacteria in the digestion tower to reach the nutritive substance of the sludge and the suspension. • The conversion and the decomposition of organic matter will improve because the bacteria in the digestion tank and the digestion tower easily reach the nutritive substance of the sludge and the suspension through a high voltmeter. 2. Introduction .jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/4(2).jpg'>3. Characteristics • Reduction of operation cost and efficiency improvement through gas yield increase • Remarkable gas yield in the digestion tower and the tank • Remarkable reduction of power consumption of pump and mixer • Minimum energy cost • Low investment cost • Easy and flexible additional installation • No regular maintenance and follow-up service is required;can be used all the time. 4. Applications • Surplus sludge • Digested sludge • Floating and puffed sludge • Return sludge • Mixing sludge |
Technology & Process | |
| 225 | BIODAMCHES | BIODAMCHES | Exen Environmental Inc. | http://www.greatexen.com/ | 1. Outline - BIODAMCHES is a bio filtration odor control system and it was developed by Exen’s environmental technical research center which was established in 2007 and has researched microorganisms. carriers and odor control system. About 200 BIODAMCHES have been installed and operated in 150 treatment plants for the last 10 years. 2. Introduction 3. Characteristics - Excellent in removing odor - Suitable to treat various malodorous substances - Easy to maintain - Easy to be linked to a chemicophysical deodorizer - Excellent application of odor monitoring system 4. Application - Biofiltration odor control system |
Technology & Process |
| 226 | Biofilter | HD-Biofilter | Handok Eng Co., Ltd. | http://www.handokeng.co.kr | 1. Outline Biofilter is an eco-friendly and economic way to treat pollutants in gas biologically by fixing microbes in porous carrier to decompose pollutants into water. carbon dioxide. and harmless salt through metabolic activities of microbes. 2. Introduction 3. Characteristics - Able to treat composite gas - Simple structure. easy operation/ maintenance - High efficient treatment of bad odor and VOC - Cheap operation costs - Free from danger such as fire / explosion 4. Application - Toxic gas generating sites such as chemical factories - VOC emitting sites - Bad odor emitting facilities such as wastewater treatment facility and excreta treatment facility - Plating plant. leather factory - Fertilizer and feed plants - Petrochemical factories and paper-mill plants - Other domestic odor generating sites |
Eco-Friendly Products |
| 227 | Bio-filter deodorizer | Bio-filter deodorizer | Samyoung Eng & Tech Co., Ltd. | http://www.syent.co.kr | 1. Outline - It oxidizes and resolves the odor in the gases by making the suitable condition of microorganisms artificially using the microorganisms media in the deodorizer. It treats the odor and discharges as odorless gas. 2. Introduction 3. Characteristics - Development of excellent treatment efficiency compared to the conventional deodorizer : development of media-producing technology of high performance. production of highly efficient deodorizer using media of high performance. - Environment-friendly deodorizer : production of media suitable to the growth of microorganisms by using sludge. - Guaranteeing the high deodorizing efficiency by simple maintenance without special operation technology : production of bio-filter deodorizer of cheap operation cost. - Expected the increasing demand of governmental authorities : solving the civil complaints neighboring the unpleasant facilities. supplying the optimal environment for the in-situ workers. 4. Application - Sewage/wastewater treatment plant - Excreta/livestock excreta treatment plant - Water purification plant - Wastes landfill site - Slaughterhouse - Compost-making facility - Petro-chemical plant - Painting factory |
Equipment |
| 228 | Biological Alarm System Using Water Fleas | Biological Alarm System Using Water Fleas | JMENB Co., Ltd. | http://www.jmcorp.co.kr | 1. Outline - This is a biological alarm system that uses Daphnia Magana. the standard species used for poison detection tests by OECD. USEPA. and others. It reacts sensitively to various pollutants (VOCs. heavy meal. agricultural chemicals. etc.). It uses a precise index to detect pollutants to remove errors of relying on specific parameters. It adopts a statistically authenticated method and is very effective. along with a high data reliability with reaction resulting from concentration that is proportionate to WQC). 2. Introduction 3. Characteristics - This system detects poisonous substances in the water in the early stage through a mathematical method to sense changes in water flea activities following influx of poisonous substances. - This is the fastest early warning system for detecting water pollution. - It is by far the most sensitive biological alarm system. - Atypical behaviors of water fleas are monitored by continuous CCD. while changes in swimming speed. form and population are divided into 8 parameters to be analyzed according to a mathematical method. 4. Application - Prevent accidents by sensing water pollution at an early stage - Monitor water quality of rivers - Monitor water quality of intake plants - Monitor quality of water flowing into purification plant - Monitor water quality of dams |
Technology & Process |
| 229 | Biological Alarm System Using Water Fleas | Biological Alarm System Using Water Fleas | JMENB Co., Ltd. | http://www.jmcorp.co.kr | 1. Outline - It is possible to prevent incidents resulting from blooming algae and other alga beforehand by continuously measuring the algae density per river and total algae density of rivers and lakes. It is possible to separately monitor the density of green algae. blue-green algae. diatom. cryptophyceae. and total algae to observe changes in algae over time. 2. Introduction 3. Characteristics - This is an early warning system that detects poisonous substances. such as herbicides. which uses green algae as its test organism. - Easy to maintain. - Extremely sensitive. - Rarely malfunctions. - Evaluates need for alarm through various methods. - Has the most logical and fastest measure time. 4. Application - Prevent accidents by sensing water pollution at an early stage - Monitor quality of water flowing into purification plant - Monitor water quality of rivers - Monitor water quality of intake plants - Monitor water quality of dams - Monitor quality of industrial waste water - Constantly monitor water quality of survey plant |
Technology & Process |
| 230 | Biological Nitrogen Remover | Biological Nitrogen Remover | HANDOK ENG Inc. | http://www.handokeng.co.kr | 1. Outline • BNR: Biological Nitrogen Remover - Remove nitrogen by assimilation - Nitrification and denitrification: removes nitrogen through the nitrification process in which organic nitrogen oxidizes as nitrate nitrogen and nitrite nitrogen under constant conditions. The denitrification process that nitrate nitrogen after the nitrification process is reduced in the treatment system and discharged into the air. 2. Introduction 14Biz-135.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-135.JPG'>3. Characteristic • Low initial investment cost (uses an existing aeration tank) • High nitrogen removal efficiency (85% or higher) • Low maintenance cost (minimum sludge generation amount and external carbon source) • Easy operation and maintenance (automatic control system) • No new site is required (no separate engineering structure is required) 4. Application Nitrogen wastewater treatment |
Technology & Process |
| 231 | Biological treatment facility | Biological treatment facility | Yujin C&E Tech Co., Ltd. | http://www.yujincetech.com | 1. Outline - This process removes the organic materials resolvable by microorganisms in the wastewater. - This process is for the secondary treatment of urban sewage and industrial wastewater containing organic materials of high concentration. 2. Introduction 3. Characteristics - Application for the large scale of wastewater treatment. - Available of stable treatment efficiency. - Emission of surplus sludge. - Vulnerable to the change of amount of flux and water quality. - Necessary of advanced operation technology. 4. Application - Leather and fiber industry - Petroleum refining and brassware industry - Chemical industry - Paper-making and food industry - Other industry producing organic wastewater |
Equipment |
| 232 | A Respirometric Biosensor for Detecting Nitrification inhibitors | A Respirometric Biosensor for Detecting Nitrification inhibitors | Myong-Ji Univ. | http://enbio.mju.ac.kr/ | 1. Outline - Fast and simple respirometric biosensor was developed using the nitrosomonas europaea. and a technique that can monitor the inhibition of ammonia oxidation is developed. - Using the biosensor. EC50 values for various nitrification inhibitors (Allylthiourea. thiourea. thioacetamide. and phenol) are decided. - The EC50 values obtained with the biosensor were 0.018 mg/l for Allylthiourea and 0.024 mg/l for Thioacetmide. and the sensitivity is excellent. 2. Introduction - Pure culture of N. europaea (Scientific Species Name) - Biosensor assay - Assay on ammonia oxidation inhibition using biosensor - Batch test for assay on ammonia oxidation inhibition - Assay on nitrite using suspension - Results 3. Characteristics 3-1. Constant safety of biosensor - The biosensor activity is evaluated by comparing DO values before and after adding ammonia. - When the difference of DO values is greater than 1 mg/l. it is concluded that the biosensor activity is effective. - It shows excellent activity and safety for 30 days. 3-2. EC50 values for various inhibitors - By using the biosensor for detecting nitrification inhibitors. EC50 values for various ammonia oxidation inhibitors are measured. - The analyzed EC50 is relatively lower than other methods (Batch repirometric assay. and Nitrite formation assay). - The sensitivity of biosensor for detecting nitrification inhibitors is relatively excellent. 4. Application - Sewage disposal plants | Instrument & Chemicals |
| 233 | Biosensor for Detecting Nondegradable PAHs | Biosensor for Detecting Nondegradable PAHs | Dongseo University | http://www.dongseo.ac.kr | 1. Outline - The biosensor provides a more rapid and simple way to detect Nongradable Polycyclic Aromatic Hydrocarbon. 2. Introduction - The biosensor is distinctive from other environmental pollution analyzing methods in that it applies organisms. - Using the organisms. the biosensor measures toxicity levels. - It establishes the pollution observation system in the ecosystem that can be applied to other areas. - The mechanism is to use specific soil microbes that decompose Nongradable Polycyclic Aromatic Hydrocarbon as an energy source. |
Evaluation & Analysis |
| 234 | Biosensors for Steroid Endocrine Disrupters | Biosensors for Steroid Endocrine Disrupters | Pusan University | http:// www.pusan.ac.kr | 1. Outline - It is necessary to have a system that can control these substances but first there needs to be a device that can detect endocrine disrupters. 2. Introduction - Clones the gene of marker protein (estrogen receptor) that reacts against endocrine disrupters using vector that can express the protein from yeast - Creates cell biosensor by transforming the vector for biosensor in yeast - Analyzes functions of cell sensor using 12 chemicals (17 β- estradiol. Bisphenol A. Coumestrol. Tamoxifen. Nonylphanol. Octylphenol. and etc.) out of 67 chemicals listed in the WWF (World Wildlife Fund) - Creates appropriate vector in order to express estrogen receptor protein in E. coli that is easy to handle with genetic engineering - Process 1) Creation of vector for sensor 2) Creation of cell sensor. and research on functions of cell sensor 3) Creation of expression system of estrogen receptor protein 3. Characteristics 3-1. Vector for sensor - The vector for sensor is transformed in S. cerevisiae DBY1830. which is budding yeast. in order to create a cell sensor 3-2. Cell sensor - The vector for sensor is transformed in S. cerevisiae DBY1830. which is budding yeast. in order to create a cell sensor. - The research on functions of the cell sensor started after verification that 12 chemicals used for the study do not have any effects on the cell growth (Fig. 1). <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=253_2.jpg></center> 3-3. Expression system of estrogen receptor protein - The genes of estrogen receptor protein and pET21a(+) vector (Novagen) are transformed to E. coli DH5α after treating and ligating Sac. 1 and Xho 1. that are restriction enzymes(Fig. 2). <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=253_3.jpg></center> 4. Application - Detection and measurement of pollutants in air. soil. and water - Detection of Xenoestrogen in foods and other daily necessaries - Detection of Xenoestronen in living bodies | Equipment |
| 235 | Bio-server system of low pressure loss | Bio-server system of low pressure loss | Enbion Inc. | http://www.enbion.co.kr | 1. Outline - Bio-server system of low pressure loss 2. Introduction 3. Characteristics - Multi-loading system benefits Low pressure loss Prevention of clogging of media Available to treat wasted gas - Modular biofiltering system Convenient installation and maintenance Conveniently becoming bigger and large scale production 4. Application - Bio-server system of low pressure loss) |
Technology & Process |
| 236 | Bio-Sludge Dehydration System | Neo EnC Co., Ltd. | http://www.neoenc.co.kr | 1. Outline - It reduces the bio-sludge amount dramatically by more than 50% compared to conventional systems by adoption of full automatic filter press that can operate unattended. For the countermeasure against the London Convention that will prohibit the ocean dumping of waste completely in the future. it provides the innovative cost-saving system instead of conventional belt press of high moisture content. In addition. the research of bio-sludge degradation and reduction is progressing for zero bio-sludge. 2. Introduction 3. Characteristics ① High dehydration capability - Press in the slurry and get the low moisture cake through cake compression process ② Improve the treatment capability (shorten the cycle time) - Treatment capability has been maximized by the cake separation and reduction of filter bag cleaning cycle time through simultaneous open/close of filter and up/down transfer of filter bag. ③ Perfect cake separation and omission - Perfect cake separation and omission by simultaneous up/down transfer of filter bag before the filtering rooms and filter bag guide roller ④ Perfect filter bag cleaning - Each filter bag transferred up and down simultaneously before the filtering room is cleaned by spray nozzle at the bottom to shorten the cleaning time drastically and to keep the filter bag perfectly clean all the time. 4. Application - Various industry wastewater. metal industry. production process of chemical industry. dyes and pigment industry. sludge treatment of waterworks. fermentation industry. food industry. petrochemical industry. ceramic industry. mining industry |
Technology & Process | |
| 237 | BioTector | Jeong Woo ENT Co., Ltd. | http://www.koreambr.co.kr | 1. Outline • Continuous and automatic TOC measuring instrument which has high reliability and no faults in each and every organic substance measuring range on site • Powerful self cleaning technology 2. Introduction 14Biz-452_BioTector.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-452_BioTector.jpg'>3. Character • Operation rate of 99% or above. and results of measurement in 6 minutes or less • To be able to automatically select various measurement range and to measure one or more samples • Measurement module for nitrate and phosphate • Fully automatic range selection valve with which any measurement range within 0 to 5mg/l and 0 to 25.000mg/l may be selected without recalibration. dilution. or mechanical conversion • To record data from minimum range to maximum range up to 25.000mg/l • Easy maintenance of hastelloy reactor made of PFA fittings and self-discharge of PFA cooler 4. Application • To minimize generation of wastewater from sewage/wastewater treatment process • Process control of industrial waste treatment plant • To monitor cooling water / final effluent • Real time monitoring of intake station. water purification plant. surface water. stream. lake water and sea water |
Instrument & Chemicals | |
| 238 | BIOTERRACE | BIOTERRACE | Exen Environmental Inc. | http://www.greatexen.com/ | 1. Outline - BIOTERRACE is a custom engineered terrace type biofilter deodorizer that can be built at the rooftop of a building such as a dewatering building in various treatment plants to prevent your neighbors’ complaints due to odor and an ugly appearance of the building. 2. Introduction 3. Characteristics - Excellent environmental friendliness through terrace type deodorization - Suitable as a second deodorization system - Suitable to treat various malodorous substances - Easy to maintain 4. Application - Environmentally friendly terrace type biofilter deodorizer |
Technology & Process |
| 239 | BIPV Module | BIPV Module | S-Energy | http://www.s-energy.com | 1. Outline - BIPV = Building materials + Power production As can be seen from the product’s name. BIPV (Building Integrated Photo Voltaic) does not only provide electricity generated by solar energy. It can be used as an exterior material for improved building structure and the better design quality. Construction cost can be cut down by switching to BIPV. as an alternative exterior material. 2. Introduction 3. Character - Wind-load proof system and secured module safety. - Safety secured by using PVB Film - PVB Film is used on the laminated glass installed in multistory buildings as it has superior heat/moisture resistance and adhesive strength. compared to EVA Film - Excellent in insulation. weight-load withstanding. heat/moisture resistance. - The module with Geon-mark (a quality certification mark awarded by Korea Conformity Laboratories) used. - Supports the growing electricity consumption within the building. - Less material cost by using PV (Photo Voltaic) as building exterior. - Mitigates electricity peak-time use overload caused by over-air-conditioning in summer. - BIPV. as an exterior design element for an environmental-friendly building. contributes to the building’s value improvement. - Since it does not require an additional or a separate space for installation. it is suitable for confined living floor space. - A building is where the most of people live in. and it can therefore. provide chances of promotion. - As power generation and consumption happen at the same place. loss of electricity in transmission is minimized. - Not only applicable to newly constructed architecture. but also to buildings being remodeled or renovated. 4. Application - Photo voltaic module |
Eco-Friendly Products |
| 240 | BIPV Module | S-Energy Co., Ltd. | http://www.s-energy.com | 1. Outline • BIPV (Building Integrated Photovoltaics) = building materials power production • It produces electricity using building photovoltaic energy to supply energy to customers. Furthermore. it is used as building cladding. an element. to enhance the building structure or the design value. It can also reduce construction cost by replacing existing products with BIPV products. 2. Introduction 14Biz-129.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-129.JPG'>3. Character • Secure system wind load and self-module structure stability - It secures stability by using PVB film - It applies PVB film to high-rise buildings because of its excellent heat resistance as well as moisture proof and adhesion strength compared with eva film. - It shows excellent performance on insulation. durability load. and heat resistance and is moisture proof. • BIPV Installation Effects - It supports power consumption in increasing buildings. - It saves the material cost for construction by using PV as building cladding. - It helps to ease electricity peak because of the cooling load in summertime. - It contributes to enhance the building value as eco-friendly building design elements. - No separate installation site is required: appropriate for the small living floor space. - It plays the role as a public relations hall for the people who live in the building. - It minimizes power dissipation because of power transmission because production areas and consumers are equal. 4. Application • Applicable for improvement and repair of new or existing buildings • Production of photovoltaic electricity • Building cladding |
Equipment | |
| 241 | BIPV-System | BIPV-System | Kolon Environmental Service | http://www.kolon-kesco.com/ | 1. Outline - This BIPV-System does not generate pollution and require fuels. And it is easy to install and has a long life. Solar photovoltatic power generation. an infinite clean energy is a dynamic force for growth of a green energy business to which Kolon Environmental Service gives attention. 2. Introduction 3. Characteristics - Reduction of a lighting load (10% transmission of visible rays / 99% blocking of ultraviolet rays) - Pleasant environment (inflow of healthful natural rays /healing effect of natural rays) - Green energy (electricity generation by photoelectric effect) - Reduction of an air conditioning and heating load (90% blocking of infrared ray / use of double grazing and insulation frame) 4. Application - Alternative energy |
Technology & Process |
| 242 | BJR SYSTEM(Highly concentrated organic wastewater treatment system) | BJR SYSTEM | Ilshin Environmental Engineering Co., Ltd. | http://www.okilshin.co.kr | 1. Outline - By improving the transfer coefficient among the air-wastewater-microorganisms and maintaining the highly concentrated microorganisms. it can supply the enough oxygen to control the pollution load ratio by 40kgBOD/㎥•d. - Cylinder type reaction tank with sealed top. - The specialized jet nozzle is installed at the top of the reaction tank in the middle and vertical type. - Circulating pump and pipe line to pump the mixing liquid by jet nozzle. 2. Introduction 3. Characteristics - Compact module design to install easily - Minimizing the site area by the operation of high load ratio - Small sludge emission - High flexibility for the change of inflow pollution load - Saving the construction and operation cost by the compact structure - Easy to enlarge the conventional treatment facility - Speedy application of microorganisms to wastewater - High treatment efficiency for the toxic material such as formaldehyde and phenol - Design to reduce the emission of odors - Easy maintenance by supplying the regular oxygen and using the two-phase jet nozzle semi-permanently. 4. Application - Livestock wastewater - Leachate of landfill site - Leachate of food waste - Wastewater of pulp and paper-making - Wastewater of chemical plant (petro-chemical. fertilizer. paint and medicine-making) - Wastewater of food processing - Urban sewage and household wastewater - Wastewater of dying and leather |
Technology & Process |
| 243 | Bladder Embedded Anti-Water Hammer Pressure Tank | BAL-trol | FLOWTECH Co., Ltd. | http://www.flowtech21.co.kr | 1. Outline - Non-power. Bladder type Anti-Water Hammer Equipment that is installed in the liquid pipes for construction facilities. plants and agricultural and industrial water in order to prevent water hammer and that is embedded with both Silent Distribution Chambers which are specially designed to control upsurge and down-surge effectively and to prevent the damage of a bladder and an Up-Down Surge Control Valve which has a two-way differential frictional resistance in order to control water hammer effectively. 2. Introduction 3. Character - The ratio of air and liquid in a tank is maintained some 1:1 during the initial normal operation as shown below (C). - Fluid flows in to a pipe with the power of compressed air in the case that a pump stops suddenly. - Additional compressor is not necessary as compressed air and liquid are separated by a diaphragm. - There are limiting factors such as a capacity limit (5m3) and design pressure (10kg/cm2) due to the use of a diaphragm. 4. Application - Anti-water hammer. |
Equipment |
| 244 | Younggap 400V type | Younggap 400V type | Yonggap Boiler Saemaul Industry | http://www.younggapboiler.co.kr | 1. Outline In setting the independent water pipe under the boiler. we seal the lower direct pipe and unseal the upper string. That is why strings are hanging the lower part of water tank. By doubling the inner pipe. a water providing pipe is composed. so that the fire heat reflected to several independent direct water pipes is exchanged in direct water pipe. so water temperature is raised rapidly. 2. Introduction The problem of existing boiler. - When you install extra steam drum. the inside water tank of boiler did not compose the water way smoothly. so the functional efficiency was reduced and energy consumption was higher. which results to the economic loss. - The pipe composed of path and water pipe or fuel pipe was cracked. because of the elasticity of boiler. The procedure of energy combustion was imperfect because of the resistance of cold damage. so a carbon was accumulated inside of combustion room. and water pipe was filled with scale. It results to the decline of boiler function. 3. Characteristics - Perfect energy combustion: The best priority is security management of boiler - Expansion of boiler lifetime: Prevention of scale inside waterway - Economic: Reduction of energy (You can save the energy cost. about 25~35%) - High temperature and overload pressure cuts the elasticity of boiler - Installation of joint plate on up and down cylindrical water tank wall: Removing the abrasion stuff generated from providing water - Burner attaching part: You can attach a gas. gasoline. bunker Coil burner - Certification of National Industrial Test Institute 4. Application - Agriculture: Flowering plant complex. Fish farm. Glass greenhouse. Crop harvest. Fruit harvest - Group facility: Public bathroom. Hot spring. Hotel. Massive apartment complex. camp - Industry: thermoelectric power plant. Drying facility. other industry spots | Energy |
| 245 | bolted tank | bolted tank | Daw Tech Co., Ltd. | http:// | 1. Outline - It is a bolted-type tank of easy maintenance and extension - The bolt is plated with melted zinc. and the bolt head is coated with ABS resin. therefore it is highly anti-corrosive. 2. Introduction 3. Characteristics - Economically efficient due to the short period of supply. - It is possible to increase the volume of the tank. and cheaper than other types of tanks - A short construction period compared to a welded or concrete tank - According to the types and amount of a product to be stored. it is possible to choose various models by the types of material. - As the tank is built without welding. it is possible to install the tank safely in a flammable place. - The quality of the tank is stable as the components go through quality-control after completely manufactured in a factory. therefore easy to meet the supply deadline. 4. Application - Drinking water storage tank - Sewage. wastewater treatment system - Fire-fighting water storage tank - Power plant - Oil tank - Synthetic resin tank - Food storage tank. grain storage tank - Mineral tank - Chemical tank |
Equipment |
| 246 | Bookang Bio-ceramic Filtration (BBF) | Bookang Bio-ceramic Filtration (BBF) | Boo-Kang Tech | http://www.bkt21.co.kr | 1. Outline - Bookang Bio-ceramic Filtration is an upflow multi-layer bio membrane filtering technology. which performs bio-ceramic treatment and physical filtering processing simultaneously by adhering microorganisms to the filled media in the reactor cistern. Further. it is a bio-ceramic treatment processing performing stable and easy elimination of nitrogen. organic matters. and solid. even in the winter times as well as appropriately applicable to sewage disposal plants that is lack of hydraulic staying time for the advanced treatment. 2. Introduction 3. Characteristics - Excellent elimination of nitrogen residue. organic matters. and floating materials provides stable treated-water quality. - Easy operation by the inner-packed remote controller and monitoring system. and prompt and easy accident prevention and response. - Specific separate filtering paper is unnecessary because filtering paper function is substituted. - Superior removal capacity of dissolved organics. - Stable quality of the treated water can be obtained unaffected by low water temperature and load change. - Water quality improvement can be achieved without reformation of previous bio-reactor cistern. - Superior elimination of dissolved organic matters. - Capable of treatment of early-stage storm runoff inflows to the sewage disposal plant. - Capable of phosphorus elimination with simple chemical injection without furnishing specific equipments. - No need to change media because the duration of multi-layer media is semi-permanent. - Convenient manufacturing. technology devolution. and post-treatment for Korean customers because the development was done absolutely by Korean. - Long durability of filtration due to the multi-media system. - Separate backwashing of upper and lower media becomes possible. and backwashing amount is reduced. - Simultaneous backwashing of air and water is conveniently carried out and backwashing efficiency is excellent. 4. Application - Desulfurization Technology with the Use of Biochem Catalyst |
Technology & Process |
| 247 | Booster system | Shinhan Pump Tech. Co., Ltd. | http://1181.co.kr | 1. Outline Booster system is the high-tech pressurizing water supply equipment which combines more than 2 pumps in parallel. and is structured into a system along with the PID control panel equipped with latest functions. which supplies the amount of consuming water by maintaining consistent pressure of the pipe. The system uses logarithm control. which uses pressure switch. and inverter control using inverters. In particular. it is an ideal water supply measure as inverter control maintains the same water pressure of the pipe through controlling the number of pump rotation. 2. Introduction 3. Characteristics 1) High quality intelligent computer control - Provide various functions through self-development of customized controller. and possess latest accurate control capacity 2) Energy saving system - Reduce electricity fees by over 30% through operation and control of number of necessary pumps according to the needed water supply amount 3) Maintain consistent discharge pressure - Available for pleasant water supply by maintaining consistent discharge pressure despite rapid change of water supply amount 4) Use high quality component - Prevent corrosion by designing and manufacturing pumps and major components with high quality stainless steel and provide clean water 5) User friendly product design - Guarantee rapid period for payment by using standardized design and components. and make Korean LCD menu for users to use it easily 6) Quality guarantee and rapid after-sales service - Complete inspection on manufacturing and factory function test for perfect quality guarantee. establishment of rapid. anytime. anywhere after-sales service system 4. Application 1) Resolve low water pressure (Resolve water pressure shortage at top 2 layers) - Maintain water supply pressure to the top part of the building by using pressurizing water supply method 2) Prevent water pollution of rooftop water tank - Do not need rooftop water tank which was used at elevated tank method and can prevent water pollution of the water tank from its source 3) Saving in construction fee. increase space use - Removal of rooftop water tank reduce construction load. lower structural costs. increase construction space use area. and save pipe construction fess through bottom-up piping 4) Saving electricity cost and use minimal installation space - Able to save over 30% in electricity cost compared to the conventional electricity cost. easy to install using minimal installation space. and reduce construction time |
Technology & Process | |
| 248 | Built-In Oxidation Ditch System for Basins Causing Uro Changes | PhiCD? | Green Technology Co., Ltd | http://www.greenenc.com | 1. Outline - PhiCD. biological advanced treatment system. is designed to implement an upgraded version of advanced treatment for oxidation ditch. combine built-in oxidation ditch for basins to create a treatment facility and simultaneously remove organic matters. nitrogen and phosphorus by using changing uro and intermittent aerobic digestion. 2. Introduction 3. Character - ICD? is a built-in oxidation ditch used to separate solid materials from liquid in a built-in basin. - Facility and powering cost is effective because it obviates the need for sludge collector and return facility. - It features horizontal fluid state that keeps oxidation ditch in parallel with basins. - It costs less in terms of basin efficiency than a upper type of BMTS and reversal type of Boate Claritier. - It excels in removing sold materials and occupies a small area of basin in terms of water volume and size. 4. Application - Built-In Oxidation Ditch System for Basins Causing Uro Changes. |
Technology & Process |
| 249 | Buoyancy Decanter | Buoyancy Decanter | Joeun Environment Co., Ltd. | http://www.rcf.kr | 1. Outline - There is no scum and sludge spill as treated water under precipitation conditions after reaction is discharged into the upper part through a Buoyancy Decanter. 2. Introduction 3. Characteristics - No sludge spill - Convenient maintenance in an emergency as this Decanter is compact and is equipped with a desorption device - Economical as this Decanter does not require a drainage tank - Built-in safety device that blocks the inflow of sludge during aeration - Requiring less site area and convenient secondary treatment as this product is a submersible Decanter 4. Application - Sewage Treatment |
Equipment |
| 250 | Butterfly Valve | Shinjin Precision Industrial Co. Ltd,. | http://www.shinjinvalve.co.kr/ | 1. Outline - Butterfly valves for water works (safety cap for valve. disc location control device). 2. Introduction 3. Character - Safety Cap for Valve (Patent No.:.10-1033502) When a valve is shut because of overrun. the cap attached to the shaft of a manipulator(gear box) prevents the manipulator(gear box) from be damaged by idling. - Disc Location Control Device (Patent No.:10-1178484) Disc Control Device prevents the disc from overrunning during the working of a valve and fixes the disc when the manipulator(gear box) is released during the maintenance or closing of the manipulator(gear box). - Concentric Structure. Because concentric structure of a valve disc lessens fluid resistance. it can stand up to positive pressure. 4. Application - Valves |
Equipment | |
| 251 | C.T.O | Devocs Co., Ltd. | http://www.devocs.co.kr | 1. Outline One of the biggest interests in the combustion type VOC removal facility is how to minimize the fuel consumption. because the economical efficiency is an important factor for the selection of equipment. The decomposition efficiency of VOC materials is high in the combustion at high temperature of more than 800oC and the treatment capability can be surely secured. however. it makes oxidation by catalyst at comparatively low temperature of 300~400oC to save the fuel cost. It is designed to get more than 95% of decomposition efficiency of the VOC containing gas by the oxidative combustion of catalyst. It is economical in terms of fuel consumption. therefore. but it is required to replace the catalyst when a certain period of time is elapsed. 2. Introduction 3. Characteristics - Economical as of little fuel consumption as it is treated in low temperature - Simple structure for easy maintenance - Can be installed by horizontal type or vertical type according to the site area condition - Catalyst replacing cost is expensive. - Separate pretreatment is required when inflow of catalytic poisons such as halogen compounds. sulfates. organosilicon. and tar. 4. Application - VOCs removing facility |
Technology & Process | |
| 252 | Cabin Combi Filter | Cabin Combi Filter | EST Co., Ltd. | http://www.estltd.co.kr | 1. Outline - This Cabin Combi Filter brings in clean air and removes offensive odor. harmful gas and dust to improve air quality in vehicles. 2. Introduction 3. Characteristics - Remove fine dust and fine particles in vehicles at a time - Remove VOCs at a time - Remove offensive odors at a time - Remove dust+ VOCs + offensive odor at a time with the same size and amount of existing filters - Very high offensive odor removal efficiency. 4. Application - Filter for vehicles - Purifier filter for vehicles - HC-TRAP for vehicles |
Equipment |
| 253 | CAFILDEX? HECY series | CAFILDEX? HECY series | EcoPro | http://www.ecopro.co.kr | <div><span></span> </div> <div><span>- </span><strong>CAFILDEX? HECY series</strong></div> <div> <div> </div> <div>This cylindrical product allows installation without a buffer frame. Like SW series. it can control complex gases because SW Media has been applied. Aluminum anodized frame materials are used for the frame. This product is mainly used for FFU.</div></div> | Air Treatment |
| 254 | CAFILDEX? SW series | CAFILDEX? SW series | EcoPro | http://www.ecopro.co.kr/ | <div> </div> <div>- CAFILDEX? SW series</div> <div> </div> <div> <div>SW is a panel type product made by layering several media. and the product’s name comes from its SandWich manufacturing method. SW Media is suitable for the control of complex gases. as it is composed of several layers. For frame materials and removed gases. customized designs are available considering customers’ requests field situation. and thus customer satisfaction is high.</div> <div> </div> <div> </div></div> | Air Treatment |
| 255 | CAFILDEX? TY series | CAFILDEX? TY series | EcoPro | http://www.ecopro.co.kr | <div> </div> <div>- CAFILDEX? TY series</div> <div> </div> <div>This multi-tray type product has the advantage of low pressure loss due to its wide area. and its tray is produced by filling in pellet-shaped media and allows you to control a variety of gases according to the formulation method. Also. the box can be used semi-permanently due to SUS material. and maintenance cost is reduced because the tray is replaceable.</div> | Air Treatment |
| 256 | Cake hopper | Cake hopper | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - Cake hopper improved the weakness which conventional sludge hoppers have. one which an operator of an arm roll truck removes a waterspout manually and opens a hoppergate and loads sludge by enabling the operator to remove the waterspout wirelessly . 2. Introduction 3. Characteristics - Improvement of working environment of a hopper room whose working condition is poor - Reduction of cost of equipment by using a hydraulic unit of existing hoppers - Prevention of pollution of a hopper room because a waterspout is in its regular position - Improvement of convenience by a remote controller 4. Application - Storage hopper of concomitants and sludge in sewageㆍwastewater treatment plants - Storage hopper of concomitants and sludge in sewageㆍwastewater plant in water treatment plants |
Equipment |
| 257 | Cake Hopper | Cake Hopper | TAEKYUNG Co., Ltd. | http://www.tknt.co.kr/ | 1. Outline • A unit to temporarily store dehydrated cake discharged from dehydrators of wastewater treatment plants. water plants. and sewage treatment facilities. • Because the hopper gate opens and closes with a hydraulic and pneumatic actuator or a power cylinder. costs for technical personnel and time can be saved. 2. Introduction 14Biz-55.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-55.JPG'>3. Character • It is easy to discharge the stored substances. • It is easy to open and close the hopper gate. • Because the stored cake is completely sealed. malodor is prevented and the surroundings are maintained clean. • Safe working environment 4. Application • Wastewater treatment plants • Water treatment plants • Sewage treatment facilities |
Eco-Friendly Products |
| 258 | SHENTECH | CAN MASTER? compact cans (steel & aluminium) to reduce bulk and expences transportation. It is so economic and practical facility. And also it is durable easy to use and trouble free. Iis used for compacting the large sum of aluminium scrap. ferrous scrap and drum. We. SHENTECH use this facilities in recycling sorting plant. factory etc. | Energy | |||
| 259 | Candle filter | Candle filter | Dongkwang E-Tech Co., Ltd. | http://www.dongkwange.co.kr | 1. Outline - Gas containing the mist passes through the fiber horizontally. - The particle of dust is collected and conglutinated at each fiber and become membrane. It is drained to the downward by the gravity passing through the fiber with the gas flow. 2. Introduction 3. Characteristics - It is able to remove the dust and oil mist in the gas. - The life of filter is long and it completely removes the pollutants due to the density control. 4. Application - Production factory of artificial leather - Production of expanded wallpaper - Factory producing the oil mist - Production factory of vinyl |
Equipment |
| 260 | Car Wash Wastewater Treatment Equipment | Saehan Enviro Tech Co., Ltd. | http://www.shent.co.kr | 1. Outline • A unit installed in car washes to enhance car-wash wastewater quality so that wastewater can be recycled and can be supplied for other purposes consistently. Treating the wastewater helps lengthen the service life span of automatic car-wash machines and raise car-washing quality. which results in the high satisfaction of customers that visit the facilities. 2. Introduction 14Biz-62.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-62.JPG'>3. Character • First in the field to obtain a technology patent • Decrease in the amount of chemicals used and reduction of chemicals costs • Decrease in sludge discharge • High durability and great design • Completely automatic system • Low maintenance costs and low breakdown rate • Steady supply of treated water • Short installation period and high space efficiency • Supply of reusable water to extend the service life of car-wash machines • Improvement of car-washing quality 4. Application • Car-wash machines in gas stations • Car-wash wastewater treatment facilities |
Equipment | |
| 261 | Carbon Aerosol Monitor | SOCEC | APM Engineering | http://www.apm.co.kr | 1. Outline - Measuring the concentration of OC and EC of the micro particulate dust continuously 2. Introduction 3. Characteristics - Automatically and continuously measuring OC. EC. and CC of PM2.5 in the air - Accurately measuring by NDIR and Laser transmission(TOT) method - Suitable to NIOSH and EPA STN Method - Creating the high accuracy by 0.01㎍ 4. Application - Analyzing the carbon element of fine dust (PM2.5) in the air - Quantitative analysis for each item of organic. elemental and carbonate carbon |
Equipment |
| 262 | Carbon Filter | Carbon Filter | ChangMyoung Co., Ltd. | http://www.changmyoung.com/ | 1. Outline - Activated carbon is made from wood. palm kernel shells or coal and shows a high adsorbability when it is made by steam activation and its particle sizes vary ranging from grain to very fine powder. Activated carbon usually has a surface area of 1000 m2 per one gram and a functional group of a carbon atom existing on the surface absorbs molecules of adsorbate by applying gravitational force to liquids or gases around the carbon. 2. Introduction 3. Characteristics - Increased adsorptive power by using not only activated carbon but also zeolite - Selective absorption of gases that cannot be absorped with existing activated carbons - Good absorption as deodorant is evenly scattered - No falling powder - Not becoming lumpy as activated carbon and zeolite are adhered evenly by a special method - Controlling the thickness of a filter and the amount of activated carbon and zeolite 4. Application - Home to microorganisms in using microorganisms in a wastewater treatment plant |
Equipment |
| 263 | Carbonization system / crush-dry - carbonization | Carbonization system / crush-dry - carbonization | Ideal System Co., Ltd. | www.idealsys.co.kr | 1. Outline - This product carbonizes waste generated from large cities and towns and makes it usable. 2. Introduction 3. Characteristics - Continuous carbonization is possible due to automatic supply of raw materials. - This product does not generate pollutants due to carbonization at high temperatures. - Automation of operation makes it possible to cut down the number of personnel required to operate the facility. - Various wastes such as food waste and sewage sludge can be disposed. - Carbide can be used as a fertilizer. soil conditioner or fuel energy. - Carbonized amount can be reduced by about 10~15% of waste input. 4. Application - Carbonization of waste |
Technology & Process |
| 264 | Cartridge-Type Dust Chamber (AP series) | AP series | CHUNGHO C.A. Co., Ltd. | http://www.chca.co.kr/ | 1. Outline - CHUNGHO C.A.’s cartridge-type dust chamber (AP series) features an air pulse-type dust chamber that enables easy filter management. The system configures a filter structure in the shape of a cartridge to secure a filtering area and thereby to capture even minute dusts. 2. Introduction 3. Characteristics - It uses Hangul graphic method. - It is easy to easily identify conditions over the filter’s dust accumulation by using a MANOMETER (Digiter) and figure out the timing of exchange. - In operating a dust chamber. it automatically separates dusts and is operable around the clock. - It ejects pressed air as well as dusts adhering to cartridge filter through a BLOW TUBE by using a JET method and absorbs them into the air to reverse the flow for efficiency of separating dusts. - No vibration and low noise. - If differential pressure reaches a certain point. carry out air pulse to clean the filter and thereby to significantly extend filter’s lifespan. 4. Application - Mixer operation - Input of dust deposit - Substrate processing - Battery - Metal processing |
Equipment |
| 265 | CASS SBR System(Cyclic Activated Sludge System) | CASS SBR System | Asia Pacific Water Technology Inc. | http://www.apwtech.co.kr | 1. Outline - It is composed of three reaction tanks which performs each role. 2. Introduction 3. Characteristics - Flexibility (flexibility to the shock load) - Convenience (convenience of operation and maintenance) - Reliability (reliability of operation) - It is available to culture the microorganisms selectively and it has excellent denitrification efficiency. - It improves the treatment efficiency by returning the microorganisms sludge and prevents the filamentous fungus. - It secures the stable biological environment by operating PRC system which controls the DO automatically. 4. Application - Advanced sewage treatment facility (removal of T-P) - Household wastewater treatment facility - Industrial wastewater biological treatment - Wastewater treatment containing organic materials |
Technology & Process |
| 266 | CAST-V2 Coagulant Injection Rate Controlling System | CAST-V2 Coagulant Injection Rate Controlling System | SAM BO SCIENTIFIC CO., LTD | http://www.sambosc.com | 1. Outline CAST-V2 Coagulant Injection Rate Control System is a system which automatically decides the injection rate of coagulants and controls it. The measuring principle of the system is based on particle charge measurement and appropriate technology. and the system decides the injection rate of coagulants according to the standard coagulant demand. And the system is equipped with an accurate Dosing System. 2. Introduction 3. Characteristics - Equipped with a screen and screen cleaning device for highly-turbid water - Periodic back washing of the screen. immediate cleaning after gauging measuring cell and sampling line - Provide the output of coagulant injection rate and self diagnosis warning (RS232 or 485. & 4~20mA) - Protocol provided by CAST allows to see the whole operation condition of CAST with a program in a control room (optional) - Equipped with an auto sampling and rinsing system - Equipped with an auto cleaning system: measuring cell. piston. sample line auto cleaning. adjustable cleaning time/frequency - Save turbidity. conductivity. alkalinity. TOC. Ph. temperature. flux. coagulant injection rate data in real time (optional) - High-performance processor sets parameters and display. software saves titration curve and display - Save standard titration method and specific measuring method required by a user into the system - Directly set calculation output to control injection pump of coagulant (optional) 4. Application - Control the injection rate of coagulants |
Technology & Process |
| 267 | CATACUBE | RTI Engineering Co., Ltd. | http://www.rtieng.com | 1. Outline • Catalyst test system • CATACUBE produces a concise version of large scale pilot plant to improve and simplify customer’s research capacity 2. Introduction 14Biz-422_Catacube.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-422_Catacube.jpg'>3. Characteristics • Compact Design • Low cost • Fullyautomatic control anddata acquisition system • Easy maintenance • Multipurpose test 4. Applications • Catalyst for process and environmental development • Gas–liquid reaction process test • Continuous high-pressure/ high-temperature reaction test • Takes the synergy effect for process development |
Instrument & Chemicals | |
| 268 | Catalitic Converter | Catalitic Converter | CERACOMB | http://www.ceracomb.co.kr/ | Diesel Oxidation Catayst Converter for Automotive | Eco-Friendly Products |
| 269 | Catalyst Oxidation System(CCS) | GG clean system | Gilqwang GreenTech Co., Ltd | http://www.gilgwang.com | 1. Outline GG clean system is a concentrated catalyst oxidation system(CCS) which can reduce effectively VOCs (Volatile Organic Compounds) and bad odor from a source which has a large capacity with low concentration ratio and greatly variable operating conditions. 2. Introduction 2-1. Process <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000099_1.jpg></center> 2-2. Specifications of the system - Removing efficiency . Adsorption tower : Over 95%. Catalyst tower :Over 99.8% - Size : 2.000 X 2.700 X 3.000 (mm) - Desorption cycle : One time per day (After working) - Weight : 1500 kg Desorption temp. - Power : 3φ. 2.3kw 220V/380V - Oxidation temp. of catalyst : 300℃ - Heat source : 250.000 kcal/hr. Gas Burner (LPG/LNG) - Guarantee period : Two years (When replacement cycles for consumption parts are kept)Wind - capacity : 400CMM <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000099_2.jpg></center> 3. Characteristics - Guarantee the capability of the system definitely by keeping the design criteria for air pollution protection - Conformity with the various rules related to VOCs (Air Environmental Conservation Law. Regulations for the Allowable Values of Air Pollutants of Seoul city) - Excellent capability of adsorption (more than 95%) and desorption (more than 99.99%) due to the application of ACF. - Excellent efficiency (99.8%) for the removing of VOCs by using optimum catalyst <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000099_3.jpg></center> 4. Application - VOCs : Painting and drying facility. Film and printing shop. Manufacturing plant of organic compound. Chemical plant. etc - Bad odor stuff : Grain processing plant such as yellow corn (food oil. snacks. etc). Fodder and leather processing plants. Various chemical plants | Equipment |
| 270 | Catchmop 4piece Set | Catchmop 4piece Set | CLEMBON | CATCHMOP is a multi-purpose cleaning product. made with ultra micro-fiber that is much thinner (about 0.1 denier) than the conventional Nylon micro-fiber (about 1.0 denier) or other yarns. Made by using a new technology of micro-fiber. CATCHMOP thoroughly cleans any surface. nooks and crannies picking up all types of old dust and dirt without chemicals or detergents: just wetting with water is enough. Moreover. it can be reused over and over again by just washing it with water. It can also be used in dry state without water. It is available in different sizes and types (cloth. glove. pad. sponge and scrubber) and can be used for many purposes. including commercial cleaning as well as household cleaning (kitchen. bathroom. floor. window-seal. appliance. furniture and automobile. etc.). Optional Information - Payment : T/T in Advance - Payment Price : 7 USD - Origin : South Korea - Minimum Order : 5.000set - Packaging : Carton/Inner case - Samples : Charge - Sample Price : 7.1 USD - Remarks : * Terms of Condition : FOB Korean Port All terms are negotiable. | Energy | |
| 271 | Cathodic Protection Monitor (CP-monitor) | SD - 21 | SUNDOO Electronics Co. | http://sdtron.co.kr/english | SD-21 is an equipment to measure [cathodic potential] spilling for corrosion prevention of gas pipe that is laid under the ground . By 100 ㏁ input impedance. input resistance can be measured exactly without error in some topography because granite topographical feature was applied according to a lot of domestic real conditions(Generally other equipments use 1 ㏁ or 10 ㏁. Place that land resistance is high is big error). - Test corrosion conditions of various constructions and steel pipes - Joint development with KGS(Korea Gas Safety Corporation) - Simultaneous measure of Voltage. electric current. ground resistance. frequency(the world's first) - Easy measurement of alternative current interference and earth specific resistance - Built-in printer type - Earth Resistance Tester(Option) ※ Win the grand prize in '2007 Korean technology frontier award' | Equipment |
| 272 | CATT Design | CATT Design | CI Biotech Co., Ltd. | 82-33-452-8472 | 1. Outline - The process consists of inline mixer. drug input facility and all-in-one cohesion and precipitation reaction tank as chemical phosphorous treatment technology relying on circulating system that guarantees stable water quality. 2. Introduction ① Process alignment: Final basin effluent water ㆍAll-in-one cohesion precipitation facility ㆍRear-side facility ② Structure of reaction tank ㆍStructure of 4EA ㆍCirculation of 4 stages (inflow/mixing → mixing/sedimentation 1 → sedimentation 2 → discharge) ㆍEach 4 stages reaction tank shares the role. ③ Normal operation ㆍOperating Time Schedule (15 min per minute) ㆍOperating 60min/Cycle ㆍSuccessive inflow/successive discharge ④ Emergency operation ㆍ60min/Cycle → 40 min/Cycle Conversion operation ㆍGradual operation/10min ⑤ Input of chemicals ㆍInput of coagulant ㆍInjection ratio: 20 to 100mg/L ⑥ T-P removal efficiency ㆍMore than 90% of removal efficiency vs 2mg/L. content of inflowing raw water Drug input 3. Character - Ruling out influence of warm current and windage. fats sinking by blocking inflow. Upgraded precipitation efficiency due to a rear-side facility that is part of a precipitation process. - Upgrade cohesion efficiency following a complete mixture of chemicals and change in agitator speed following the change in reaction tank’s water level. - Change in operation hours in the event of an increase of flow. Stability in water treatment relying on increase of input chemicals and Batch Type. - Minimize site area. - Reduce input chemicals. 4. Application - CATT process |
Technology & Process |
| 273 | Cavitation Air Flotation (C.A.F) | Yucheon Enviro Co., Ltd. | http://www.yucheon.co.kr/ | 1. Outline - CAF is the innovative system to remove solids from the waste water. It is designed for easy operation. maintenance and economical use. There is no clogging phenomenon as air is not dissolved but fine air bubble is generated by cavitation aerator. and it does not require pressure tank. high pressure pump. and air compressor. This system is stereoscopic rectangular structure. so the installation area is small to minimize the installation cost and other expenses. It is consisted with 4 parts of aeration area that has cavitation aerator. floatation area. solid discharging part. outlet of treated water. and controller. The process of this system is as follow. Inflow raw water comes into the aeration area. In here. cavitation aerator (2HP) inhales the air from atmosphere. and spray the fine air bubbles to the waste water. The particles attached with air bubbles floats up to the water surface for solid-liquid separation. Floated solids (oil. suspended solid) are removed by scrapper. and collected solids are transferred to the next facility for treatment. Scrapper chain is driven by 1/2HP gear motor. Recirculation from aeration area circulates large amount of treated water continuously. It removes the sedimentation in the bottom. and circulates the contents in the tank constantly. Treated water is taken into the control part. the water level in the tank is controlled. and the waste water is discharged from here after clean treatment. 2. Introduction 3. Characteristics - Only 2~3HP is required for each C.A.F. unit. - No need of recirculation pump. air compressor. pressure tank. and high pressure pump - No need of flocculation tank for slow mixing of floc - No need of line mixer and air control valve - Easy repair and maintenance of driving parts - No need of spray nozzle cleaning and underground piping - Can be installed in narrow area as of rectangular design 4. Application - Substitution of 1st and 2nd sedimentation basins and concentration tank ① Excreta (sanitation) treatment plant ② Sewage treatment plant ③ Livestock wastewater treatment plant. slaughterhouse. and dairy industry ④ Paper industry. textile industry. and tannery ⑤ Chemical industry. refinery. petrochemical industry. automobile factory waste water ⑥ Food industry. seafood processing factory - Fiber recovery in paper factory (white water. de-inking) - Removal of SS. BOD. and COD - Removal of oil. grease. and fat - Removal of countercurrent in the sewage treatment facility |
Equipment | |
| 274 | CBC(CL Bio Contactor) Media | CBC(CL Bio Contactor) Media | Clean & Green Environmental Engineering Co. | http://www.cngwater.co.kr | 1. Outline - CBC Media. commonly used for water disposal. is a highly efficient water treatment solution utilizing microorganism growth and decomposition. In particular. contact with microorganism allows organic matters or nitrogen to be effectively removed from water. reducing nonpoint pollutants or getting rid of algae while disposing of the contaminated water. 2. Introduction 3. Character - Perform filtration helped by fiber screen effects. - No blockage of filter bag: no need for filter bag replacement - Lower construction cost in the case of repairs or remodeling for system upgrade or water quality improvement as it does not require structural change of the existing building - Simpler maintenance in the absence of additional microorganism management since it keeps large quantity of microorganism secured by the internal filter bag. - Reduce excessive sludge benefitting from large amount of self-contained microorganism. - Use filer bag almost permanently thanks to its excellent resistance to chemicals and abrasion. 4. Application - CBC(CL Bio Contactor) Media. |
Instrument & Chemicals |
| 275 | CDI (Continuous electricity recycling pure water equipment) | D.M. Puretech Co., Ltd. | http://www.dmpt.co.kr/ | 1. Introduction 2. Characteristics - Easy to manage and convenient maintenance due to automated operation - Able to produce ultra pure water stably and continuously for 24 hours - Contributed to effective space use with compact design 3. Application - Large plants. water purification plants. wastewater treatment facilities. - Wastewater reclamation and reusing system |
Equipment | |
| 276 | CDI-LX systems | DAEWON ENG | http://www.rodis.co.kr | 1. Outline • It is a safe and chemical-free system that changes RO water into ultrapure water. • It can produce ultrapure water without chemicals up to 18 megohm-cm through a certified unique process. 2. Introduction 14Biz-124.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-124.JPG'>3. Character • Solid structure and a detailed design • Low maintenance cost • High-temperature sterilizing system • 100-psi operating pressure • Perfect leakage prevention operation • Low power consumption • Individual power unit and controller 4. Application • Continuous electro deionizer system for the production of ultrapure water |
Technology & Process | |
| 277 | CDM Business | CDM Business | KBEC KOREA | http://kbec.co.kr | 1. Outline - This lays the foundation for both developed and emerging countries to implement measures to reduce greenhouse gas emissions (CO2.CH4.N2O.PFCs.SF6). In this effort. the developed country provides capital and technologies while the developing country continues to make development in terms of greenhouse gas reduction. 2. Introduction 3. Character - The United Nations Framework Convention on Climate Change(UNFCCC) : In order to be - active in responding to climate change caused by the global warming. the international society - founded Intergovernmental Panel on Climate Change (IPCC) under the World Meteorological - Organization (WMO) and the United Nations Environment Program (UNEP) according to the resolution of UN General Assembly in 1988. which took effect in March 1994. - Kyoto Protocol: In order to put the agreement on climate change into practice regarding greenhouse gas emission reduction. Kyoto Protocol obliges developed countries including 11 nations in the Middle East and Europe to cut greenhouse gas emissions by 5.2 % on average vs. the 1990 level. This obligation came into force in 2005. 4. Application - Fossil fuels. (energy industry. transmission and distribution of electricity. demand management. manufacturing industry. transportation. and construction) - Process emissions (chemical industry. mine production. metal production. organic solvent) - Fugitive emissions from fuels. agriculture. forestry. etc. | Information |
| 278 | CDM Monitoring | CDM Monitoring | C.K Techpia Co., Ltd. | http://www.cktechpia.co.kr | 1. Outline - CDM. or Clean Development Mechanism is a mechanism stipulated in Article 12 of Kyoto Protocol. CDM can be used so that advanced countries can achieve reduction goal and obtain certified emissions reductions (CERs) by investing in discharge reduction projects in developing countries. 2. Introduction 3. Characteristics - Joint project by advanced countries/developing countries to reduce greenhouse gas. - Achieve reduction goal costs effectively. - Cooperation between advanced countries and developing counties for reducing greenhouse gas in advanced countries and for sustainable growth in developing countries. - It became possible for CDM projects to be conducted by participation of developing countries only at the 18th EB conference held in 2005. - South Korea is likely to be designated as Annex 1 after 2012 and South Korea government is preparing for it. - Advanced countries (Annex 1 ) are imposing greenhouse gas reduction goals on enterprises through the quota system and carbon tax. - Great efforts to reduce greenhouse gas are made throughout the country and the effort can improve corporate images. 4. Application - Reduction of greenhouse gas |
Technology & Process |
| 279 | cell Mini Solar Mobile Phone Charger | cell Mini Solar Mobile Phone Charger | LSTech Co., LTD | http://lstech.kr/ | Product Description Nucell Mini is the portable Mobile phone charger which has a rechargeable battery can be charged by Solar cell and USB port. It can be a power linker and data linker when it connects USB port and mobile phone. If we adopt the flash memory. it could be USB memory drive in 2GB. 4GB. 8GB at customer’s option. Product Feature Solar cell ■ 20% conversion efficiency mono silicon solar cell. ■ Output power: 0.125 watt. 4.6 ~ 4.7volt. 27 ~ 30 mA (1Sun. 25℃). ■ Capsulation: low reflective polymer film – high absorption Battery ■ Li-Polymer 3.7Volts 400mA ■ Power input : By USB(5V) or Sunbeam Output : 3.7V ■ Continuous talking time : About 30~40Minutes(Depends on the cellphone) ■ Stand by time : About 24 hours ■ Recharging time : USB-About 80minutes. Sunbeam-About 12hours ■ Available to : Domestic or International phones using 24pins(Changeable) Data link ■ Interface : USB2.0 ■ InstallationSoftware : Software served by cellphone manufacturer ■ Available to : Domestic or International phones using 24pins(Changeable) Mobile phone charge by USB USB Memory(0.2.4.8 GB customer's option) LED Lamp Product Specification / Models Item Dimensions: 5.9*2.4*1.5cm ( L x W x H ) Item Weight:23 g Nucell-A(Basic model without the flash memory) Nucell-B(With the 2GB. 4GB. 8GB of flash memory) Nucell-C Application 1. Portable & subsidiary rechargeable battery for the mobile phone 2. Data linker between PC and Mobile phone 3. Power linker from USB port to Mobile phone directly 4. USB memory drive(Nucell-B) | Eco-Friendly Products |
| 280 | Central Vacuum Cleaner(CVC-Series) | Wooyang ENG, CO., LTD | New concept of cleaning equipment. This is used widely and is used at cleaning room. office. factory for food. chemical products. It contributes to clean environment. increased productivity. Features It can work for a long time - Pulse jet is possible. - No need of particular maintenance - It can work a long time continuously. Cleanliness and sanitation Collected contaminants is discharged a center. so hygiene environment can be kept. Easy cleaning If you clean floors you don't need to drag heavy cleaning equipment. You can clean easily using the flexible hose only. Quiet working It has a high pressure blower and a many step turbo. so it can work many steps of wind volume. high vacuum and lower noise. Applications food factory. pharmaceutical company. electronic factory etc. | Equipment | ||
| 281 | Centrifugal Blower | Centrifugal Blower | Daeha E&G Co., Ltd. | http://turboair.net/daeha.html | 1. Outline - Adjusting high speed motor (80.000 rpm) which uses air bearing of self-floating type. - Solving the problems of existing products. 2. Introduction 3. Characteristics - Small size by high speed motor. - Minimizing the maintaining and repairing cost. semi-permanent life. - No vibration and noise. - Able to control the discharging pressure from high pressure to low. - Saving the energy (saving at 60% compared with conventional products) - Supplying clean air (Oil free and no oil system) - Easy to install (50 horse power. able to install by only one person) 4. Application - Sewage treatment plant - Wastewater treatment plant - Water purifying plant |
Equipment |
| 282 | Centrifugal Concentrator | Cheonbo Engineering Co., Ltd. | http://www.cheonbo.co.kr/ | 1. Outline - Concentration system that concentrate solids in the various sewage/waste water with high efficiency by solid-liquid separation using high centrifugal force of the centrifugal concentrator 2. Introduction 3. Characteristics ① External replacing type double bush of centrifugal dehydrator (utility model patented) - Technology to replace cake discharging bush at the site for prevention of failure - Maintenance period has been extended and maintenance cost has been significantly reduced - Centrifugal dehydrator is kept in optimum condition all the time to prevent failure and accident ② Double cover of discharging part of the centrifugal dehydrator (utility model patented) ③ Partition cover of the centrifugal dehydrator ④ Improved wear-resistance of the scroll (carbide tile. thermal spray of tungsten powder) 4. Application - Dehydration of excessive sludge and raw sludge in sewage/waste water treatment plant - Dehydration of digested sludge in sewage treatment plant - Dehydration of sludge in livestock manure and wastewater treatment plant |
Equipment | |
| 283 | Centrifugal Dehydrator | Cheonbo Engineering Co., Ltd. | http://www.cheonbo.co.kr/ | 1. Outline System to dehydrate various sludge in sewage/waste water with high efficiency using high speed centrifugal force 2. Introduction 3. Characteristics ① External replacing type double bush of centrifugal dehydrator (utility model patented) - Technology to replace cake discharging bush at the site for prevention of failure - Maintenance period has been extended and maintenance cost has been significantly reduced - Centrifugal dehydrator is kept in optimum condition all the time to prevent failure and accident ② Double cover of discharging part of the centrifugal dehydrator (utility model patented) ③ Partition cover of the centrifugal dehydrator ④ Improved wear-resistance of the scroll (carbide tile. thermal spray of tungsten powder) 4. Application - Dehydration of excessive sludge and raw sludge in sewage/waste water treatment plant - Dehydration of digested sludge in sewage treatment plant - Dehydration of sludge in livestock manure and wastewater treatment plant - Dehydration of solids in food treatment plant |
Equipment | |
| 284 | Centrifugal dehydrator for public works use | Centrifugal dehydrator for public works use | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - This centrifugal dehydrator for public works use is designed to separate solid from liquid in dredging sites and detention reservoirs. etc. The centrifugal dehydrator for public works use is well received because it can handle solid-liquid separation of dredging sand even under bad conditions. 2. Introduction 3. Characteristics - Best suitable to separate solid from liquid in dredging sand - Suitable for mounting it on a vehicle. - Suitable for treating concomitants in dredging sand which is difficult to be disposed. - Suitable to resist abrasion. 4. Application - Solid-liquid separation of dredging sand in dredging sites - Solid-liquid separation of dredging sand in digester in wastewater treatment plants - Solid-liquid separation in a soil recycling process and a stone plant - Separation of solid content in a material process - Solid-liquid separation of dredging sand in detention reservoirs |
Equipment |
| 285 | Centrifugal Dust Collector | Cyclone | Coreco Co., Ltd. | http://www.coreco.co.kr | 1. Outline - Technology removing all sorts of dust by using centrifugal force that occurs from spiral flow of gas - Structure is simple. installation cost is inexpensive. installation area is small. and recycling is possible by sorting material - Mostly used in exhaust gas with comparatively big particles and is also used in collection of B-C oil. B-A oil. refined oil and combustion and other dust using several unit clones 2. Introduction 3. Characteristics - Compatible for preprocessor facilities - Low pressure loss - Inexpensive installation cost due to simple structure - Disposal(Removes 60 - 80%) of big-size dust(Over 5㎛) - Resource reuse by sorting material is possible - Almost no maintenance cost - Operation in high temperature is possible - Collection efficiency of small particles is low and is sensitive to load and flux fluctuation – Efficient dust elimination with comparatively low cost is possible - Wide range of application 4. Application - Business facilities which generate dust such as aluminum oxide. chemical fertilizers. graphite. iron ore. limestone. coal. lead oxide. mica. soap. sugar. talc. bauxite. ceramics. flour. chrome ore. glass. plaster. plastic. quartz. silica. cork. grain. oyster shells. leather. paper. and wood. |
Equipment |
| 286 | Centrifugal dust collector | CYCLONE | Hytech Eng Co., Ltd | http://www.hy-tech.co.kr | 1. Outline - A facility removing various types of dust using centrifugal force created by spiral flow of gases 2. Introduction 3. Characteristics - Able to operate at high temperature - Low installation costs due to simple structure - Able to treat (remove 60~80%) large dusts (larger than 5㎛ in diameter) - Available for resource recycling by selecting raw material - Seldom need maintenance or fixing 4. Application - Pre-treatment facility for filter dust collector - Iron. steel manufacture. casting industries - Food and pharmaceutical industries - Grain and feed industries - Wood processing industries - Boiler dust collector - Various dust emitting industry sites. pulverizing. selecting processes |
Technology & Process |
| 287 | Centrifugal Dust Collector - Cyclone | Elim Environment Co., Ltd. | http://www.elimenv.co.kr | 1. Outline Take in the gas for treatment in the inlet of cyclone and generate vortex. Then. dust of small & large diameters in the gas obtains centrifugal force. gets out of the vortex. collides against the inside wall of cyclone. and collected. As dust is separated using the centrifugal force of particles. high performance can be expected with small facility. and it is used widely because the system is simple and the expense is cheap. 2. Introduction 3. Characteristics - Technically supplemented the biggest weak point of cyclone which is the efficiency drop factors (eddy generation. plague effect. and re-scattering) - With the innovation of gas vortex inflow method. it can reduce the pressure drop and wear of materials and treat the large dusty gas with small facility size. - Efficiency has been improved by about 10% with proper control of blow down amount 4. Application - When the dust diameter for treatment is big (dp=no less than 20㎛) - When the dust generation is intermittent (when operation rate is low) - It is used for pretreatment of high efficiency dust collectors. It is easy to apply to the boiler smoke and dry type dust collection processes. |
Technology & Process | |
| 288 | Double Suction Volume Pump | SGD - Double Suction Volute Pump | Shin Gwang Co. Ltd | www.en.sgpumpco.com |
1. PRODUCT DESIGN & CHARACTERISTICS
- High Efficiency Pump(Max 90%) - Desinged for minimum deflection of shaft means excellent shaft seal and bearing service life - Axially split heavy duty casing allow removal of upper half casing for inspection - Suction. Discharge Pump Nozzle Flange Standard: JIS B2238. ANSI STD.ISO STD - Staggered vane construction decrease the liquid pulse - High Efficiency Pump with CFD analysis - Default pump rotation is clockwise from driven shaft - Bearing lubrication. grease or oil for customized - Shaft sealing is packing seal or mechanical seal - The pump materials is customized for various liquid 2. PERFORMANCE OF RANGE - Capacity : 100~30.000㎥/hr - Head : 7~220m - Motor Power : 15~4.000Kw - Inlet Diameter: 200~1.500mm - Outlet Dia: 150~1.400mm - Working Pressure : ≤ 25 Kg/㎠ - Liquid Temperature : -20℃~ 80℃ * Please refer to the following link for the more details : https://bit.ly/2DxSrKN target=_blank>https://bit.ly/2DxSrKN
|
Water Treatment |
| 289 | Centrifugal separator | Keulim centrifugal separator | Keulim Environment Co., Ltd | http://www.keulim.co.kr | 1. Outline When liquid mixture(liquid+solid). which has a difference of specific gravity. is charged into a cylinder rotating at a high rate to increase the difference of specific gravity by a high centrifugal force. the liquid mixture is rapidly sedimented at the bottom. and separated by a screw conveyer inside the cylinder. The liquid mixture is automatically separated and dehydrated by being continuously charged in an operating condition according to properties of the liquid mixture. 2. Introduction(See table 1. Attach-1) 3. Characteristics Mixture. which has a difference of specific gravity. is automatically separated and dehydrated by continuously charging it in an operating condition. 4. Application 1) Liquid+solid(particle size is more than 0.01mm). and all mixture. which has a difference of specific gravity 2) Dehydration of various sediments(clean water. sewage. fountain) in a sedimentation tank 3) Dehydration for marine products. foods. paper making. or others 4) Separation and dehydration of plated sediments | Equipment |
| 290 | Centrifugal Separator | Jireh Ecotech Co., Ltd. | http://www.jireheco.co.kr | 1. Outline Sludge occurred in the process of sewage treatment is inserted in the rotating bowl consecutively together with polymer aggregate at the same time to separate solid and water in order to control water contented percentage of the discharged solid. Also. this exclusive sludge dehydrating centrifugal separator can control the velocity of an internal screw automatically. so that it may discharge certain amount of cake. responding to change of concentration in the incoming sludge. 2. Introduction 3. Characteristics As environmentally hazardous factor occurs a little in the decanter typed dehydrator and a user doesn’t need to be careful a lot. it’s possible to operate this dehydrator stably and automatically. This dehydrator can dehydrate any remnant sludge of very low concentration or mixed sludge of high concentration efficiently and has a speed adjusting function adjusting the velocity of an internal screw to discharge regular cake. so stable operation is realized. 4. Application - Dehydrating final sludge occurred in the water supply. sewage. livestock farming sewage. excretion and other sewage treating facility |
Equipment | |
| 291 | Centrifugal Separator | Centrifugal Separator | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - Centrifugal Separator is a high efficient device that separates solids or impurities in all kinds of excrements and livestock wastewater using the high centrifugal force of a Centrifugal Separator. 2. Introduction 3. Characteristics - Externally exchangeable double bush of a Centrifugal Separator ㆍTechnology that prevents breakdowns by conveniently replacing a cake outlet bush on the spot ㆍExtension of a repair period ㆍSignificant reduction in maintenance cost ㆍPrevention of breakdowns and accidents by maintaining an optimum condition of a Centrifugal Separator all the time - Double cover cake outlet of a Centrifugal Separator - Dividable Cover of a Centrifugal Separator - Improvement of wear resistance performance of a scroll 4. Application - Separation of fine impurities in an excrement treatment plant - Separation of fine impurities in a livestock wastewater treatment plant - Separation of fine impurities in a food waste treatment plant |
Equipment |
| 292 | Centrifugal Separator | Centrifugal Separator | Royal Precision Inc. Co. Ltd. | http://www.korearoyal.com/ | 1. Outline - A centrifugal separator is a device which selectively corresponds to particle separation and dehydration by the characteristics of disposals and it is a vermicular control movement with disposals which maximizes the separation efficiency and massive processing by continuously performing commitment. sinking. dehydration. emission and transmission even by the size(mm) of disposal particles. 2. Introduction 4. Application - Civil Engineering Sludge. Food Sludge. Chemistry Industry. Food Processing Industry and Steel Industry etc. |
Equipment |
| 293 | Centrifugal Separator | Centrifugal Separator | Master Engineering Co., Ltd. | 1. Outline • This centrifugal separator. made for diverse purposes in water treatment fields. refines. dehydrates. concentrates. and washes fine solid particles to separate them from the liquid with high turbidity. It works properly even under difficult conditions in which other devices cannot function properly. 2. Introduction 14Biz-71.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-71.JPG'>3. Character • Applicable to various properties of matter • Great for consecutive processing performance • Applicable to a range of properties of matter. including a wide capacity range • As the body’s contact parts are made of stainless steel. corrosion is not an issue. • The parts that often wear out easily are coated with alloy. making them more durable with an added resistance against wearing. 4. Application • Dehydrating sludge from sewage and wastewater treatment facilities • Dehydrating livestock wastewater sludge • Dehydrating food wastewater solids • Thickened solid–liquid separation and normal solid–liquid separation • Clean separation |
Eco-Friendly Products | |
| 294 | Centrifugal separator –Liquid separation- | LAKOA Separator | Kimsung Technology | http://www.kimsung-lakos.com | 1. Outline LAKOS Separators uses centrifugal forces to separate solids. which can be problems from liquid. This world-patent product utilize centrifugal separation that eliminates 98% of 50 mm~200 Mesh (74 Micron) such as phosphorous and even 75% of materials with 20~50 micron. 2. Introduction (see fig. 1) |
Instrument & Chemicals |
| 295 | Horizontal decanter centrifuge | Decanter L-Type Decanter | Royal Precision Ind. Co., Ltd | http://www.korearoyal.com | 1. Outline It is used in the part of the sludge treatment in wastewater treatment including human and animal waste treatment and sewage treatment. It operates in the process of enrichment and dehydration. 2. Introduction - If sludge and chemical are fed simultaneously in rotary bowl without flocculation reaction. solid will be (separated from liquid) by centrifugal pressure force and discharged with low water content cake by shear force and pressing power. Solid will be discharged in uniform cake by feed back control for screw differential. - See the Table 1. Table 1. Specifications. Fig. 1. Flow Diagram. |
Equipment |
| 296 | Centrifuge - Cone Type | FSC-300, 400, 550, 700 | Fine Tec Inc. | http://www.fine-tec.com/eng/ | Cone Type Liquid separation and cake discharge are accomplished at the moment of the supplying of source liquid owing to the combining of CONE TYPE basket and SCREW. Therefore it is suitable for treating a large quantity. As contact with liquid is made by stainless it can preserve the exterior beautifully. As it is designed with a vibroisolating structure. there is no trouble even treating the large quantity continuously. Operation This machine is performed automatically through continuous supplying of source liquid | Equipment |
| 297 | Centrifuge - Peeler Type | FDC - 400, 600, 800, 1000 | Fine Tec Inc. | http://www.fine-tec.com/eng | Centrifuge - Peeler Type As a completely airtight structure. there is no loss of source liquid and permeating of alen substance. As the contact parts with liquids. are made of stainless steel. it can maintain this machine with good external appearance. Especially. the control system that easily response to factory automation is adapted and the machine. is made not only compactly but also precisely. So it supplies the best workplace for us with its durabilityand preventing ability noise and vibration Operations Source liquid supply -> Separating -> Stop supplying -> Cake washing -> competionofMangles Automatic Operation through successive cycle of Source Liquid Supply | Equipment |
| 298 | Centrifuge screw decanter | Centrifuge screw decanter | Muhan Technic Co., Ltd. | http://www.muhandae.co.kr | 1. Outline - It is composed of bowl. screw conveyor. gear box. casing to protect the rotating part. driving device to rotate the bowl. differential gear to control the rev count of screw conveyor and electricity-controlling panel. - The bowl is rotating by high speed and the rev count of screw conveyor in the bowl is controlled by the differential gear or fixed operation by reduction gear ratio of gear box. 2. Introduction 3. Characteristics - Available to apply to the wide range of the property of matter. - Speedy treatment capacity.. - Available of unmanned and automatic operation. - Various kinds of models. - Good durability and abrasion-proof because the material of bowl and liquid-contacting part is stainless and the abrasion-concerning part is protected by the special alloy. 4. Application - Refinement : separating the liquid as having no solids - Dehydration : dehydrating the solids as having no liquid - Condensation : solids controls the concentration. - Separation : separating the solids irrespective of the size - Washing : improving the purity of solids by washing the adulteration in the solids |
Equipment |
| 299 | Ceramic media for water treatment | C Bio-Home/Ion Media | C.M. Kor Co., Ltd. | http://www.cmkor.com | 1. Outline Ceramic Media has a simple construction and an easy maintenance. is excellent in module design. microorganism adhesion in a high concentration. and removal of substrates of a low decomposition rate. removes organic carbon. nitrogen. phosphorus and floating materials. bears a change of the external force. i.e.. water temperature. pH load factor. and so on. and is effectively used for sludge expansion. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000283-2.jpg></center> 3. Characteristics (1) Maintenance of highly concentrated biological film in an anoxic aeration tank (2) Maintenance of high physical and mechanical strength (3) Mass loss rate of 0.2% or less due to aeration – semi-permanent use (4) Site decrease of 40% when media of 15% is charged into the aeration tank (5) Use of microorganism-friendly ceramic materials – Easy adhesion of microorganisms (6) Reduction of manufacturing costs due to reduction of manufacturing processes (7) Not only the biological treatment effect but also physical and chemical treatment effects (Adsorption and ion exchange) (8) Arrangement proper to site conditions – Easy application to processes and the existing systems (9) Minimized microorganism separation rate by water flow shearing force through roughness maintenance suitable to the carrier surface (10) Reduction of energy consumption by a scientific treatment method 4. Application (1) Biological film media for purifying sewage and wastewater (2) Purification of refined water in lakes/ponds | Instrument & Chemicals |
| 300 | Ceramic media water treatment method | BnF (Biofilm and Flushing Filter) Water Treatment System | Environsoft Co., Ltd. | http://www. environsoft.com/ | 1. Outline This product is a system capable of keeping advantages of a biological film system by introducing a deposit type biological film system utilizing the developed hollow ceramic media to an MLE (Modified Ludzack Etinger) basic frame. and of carrying out an improved treatment of sewage and wastewater of high load rate without pressure loss and drift current. Additionally. this system can obtain heavy water service if treating process-treating water with a hollow fiber membrane module type continuous backwashing filter. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000302-2.jpg></center> 3. Characteristics (1) Biological film treating water of turbidity of 4 NTU becomes 0.22-0.38 NTU after filtration of the biological film treating water (turbidity removal to 90% or more). (2) Complete removal of SS at an applicable pressure of 0.9 kgf/㎠ or more (3) Salt removal rate of 97-98% (4) CODcr after the filtration is 30㎎/ℓ or less. (5) Treated water can be recycled as heavy water. such as cleaning water. and industrial water. 4. Application (1) Sewage treatment plants (2) Wastewater treatment plants | Instrument & Chemicals |
| 301 | Ceramic Membrane Filter | Ceramic Membrane Filter | YUCHEON ENVIRO CO., LTD. | http://www.yucheon.co.kr/ | 1. Outline This ceramic membrane filter is an ideally designed system for the immersed filtration process. In particular. it features specialized and strong filtration layers. high-resistance to the mechanical loads and overheated chemicals. 2. Introduction 3. Characteristics - Immediate operation is available after installation - Provide a stable and high efficiency even during long-term operation - Only maintenance staff is required - Very low maintenance cost - Ensure the best recovery of a membrane by applying ADAB (chemical cleaning) 4. Application - The 3rd advanced treatment for the discharged water from STP - MBR - Gray water - Reuse of swage and wastewater - Advanced treatment of water purification - Simple drinking water treatment - Pre-treatment of R/O |
Equipment |
| 302 | Ceruse Removal Facility | Ceruse Removal Facility | Mirae NET Co., Ltd. | http://www.mrnet21.co.kr | 1. Outline - A ceruse removing facility with a new ceruse removing method and low installation and maintenance costs. 2. Introduction 3. Characteristics - Ceruse removal method: knowhow of the company - Installation cost of ceruse removal facility for 100.000 m3/Hr (temp. 75 degrees) is expected to be 300 - 400 million won - Power consumption (maintenance costs) 60 - 80 horsepower 4. Application - Used in facilities where ceruse is generated |
Equipment |
| 303 | CF series & PF series | CF series & PF series | ECONITY Co., Ltd | www.econity.com | <B>Water treatment separation membrane</B><br>- Domestic-manufactured water treatment membrane using the exclusive manufactural technology<br>- The world’s first application of the Stretching method and Hybrid method (TIPS + Stretching)<br>- Asymmetrical slit shape pore structure enables stable and exceptional treatment efficiency rate<br><B>Submerged hollow fiber membrane cassette(CF Series)</B><br>- Convenient maintenance management through a drawer type cassette method<br>- The nation’s first California Title 22 certified product<br><B>Submerged hollow fiber membrane cassette(CF Series)</B><br>Pressurized PVDF module(PF Series)<br>- Reducing the installation area through the nation’s largest membrane surface area<br>- Outstanding recovery rate by increased fouling tolerance and physical cleaning. through hydraulic module design | Equipment |
| 304 | CF Series Membrane | C-Type | Econity | http://www.econity.com/ | CF Series Membrane Submerged hollow fiber membrane. cartridge type unit cassette for easy O&M. C-Type 1. Features - Operator-friendly design in cartridge. - Flip over type cartridge design: It can save chemical cleaning and manually cleaning is possible. - High packing density. 2. Operation Net Flux - Flux 7.4 ~ 12.3 gallon/ft²∙day (0.3 ~ 0.5 m³/m²∙d) 3. Applications - Municipality and industrial wastewater treatment. pretreatment to water treatment system. | Equipment |
| 305 | Chain Flight-Type Sludge Collector (Non-metal) | Chain Flight-Type Sludge Collector (Non-metal) | World Innotech Co., Ltd. | http://www.world-inno.com/ | 1. Outline • Its flights are assembled at a regular distance and are operated by the drive shaft sprockets. which move longitudinally in a rectangular sedimentation basin as it removes the scum on the water’s surface. It also collects and scrapes out the accumulated sludge in the sedimentation basin and transfers it into a hopper. 2. Introduction 14Biz-78(1).JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-78(1).JPG'>3. Character • Great corrosion- and wear-resistance • Low maintenance costs • Easy to control because of its lightweight characteristic • The operating speed and collection can be automatically controlled depending on the sludge volume. 4. Application • Non-metal sludge treatment • Scum removal |
Eco-Friendly Products |
| 306 | Channel-type Constructed Wetland | Channel-type Constructed Wetland | ASSUM ECOLOGICAL SYSTEM INC. | http://www.assum.co.kr | 1. Outline Channel-type Constructed Wetland is an efficient water purification technique using agricultural waterway or pipe-type waterway and improves the purification efficiency by planting on the top and tying string-type media on the bottom. 2. Introduction 3. Characteristics - Applicable in various ways such as being applied to existing or newly-built water pipes - Provide good landscape - Used in agricultural waterways. water pipe waterways. and wetland waterways 4. Application - Ecological filter bed |
Technology & Process |
| 307 | Charcoal Fume collector(ZERO-STAR) | Wooyang ENG CO, LTD | It is necessary for charcoal-broiled house. barbecue. smoke broiled house. large restaurant generating smoke and smells that becomes a target of public grievance. Features Fume and smell from charcoal roaster is adsorbed to our special powder(Zero powder) completely. Filter life is expended long time. Powder is coated automatically in filter surface. After operation finished. automatic shaking off starts. Applications Charcoal-roasting house. Barbecue. Smoke broiling house. smoke and smell - occurring place of restaurant. | Equipment | ||
| 308 | Chelate Flocculant | Chorok Entech Co., Ltd. | http://cholok.co.kr | 1. Outline • Chelate means “crab’s claw.” and it is an annular complex ion in which one ligand forms a coordinate bond with a metal ion at two points or more - Chelating agent: ligand to form chelate - Ethylenediamine: A bidentate ligand in which one ligand satisfies two coordination numbers of metal ions - Ethylene-diamine-tetraacetic acid: A hexadentate ligand in which one ligand satisfies six coordination numbers of metal ions • Used to detect a small amount of metal ions • Chelate effect: Increased stability when a chelate complex is formed from another ligand 2. Introduction 14Biz-148.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-148.JPG'>3. Characteristic • Easy to handle when a problem occurs in a treatment plant • Improves the quality of wastewater with poor treatment by overload or low load • Adsorbs and removes almost 100% of metals and heavy metals in wastewater by a strong chelate coordinate bond • Removes SS and cod during abnormal operation • Early treatment and prevention for SV reduction in an aeration tank. increase of MLSS. and bulking • Increases the insufficient capacity of a settling tank by twice or more in case of microbe treatment 4. Applications • Frequent issues with regard to the water quality of the final effluent • Overload of wastewater because of lack of capacity • Poorly treated wastewater because of problems in an aeration tank • SS floating and sewer wastewater leakage because of molds in a settling tank • Wastewater with a nondegradable material that disturbs microbial activity • Wastewater with poor microbial activity • Wastewater that does not satisfy the effluent quality standard all the time • Wastewater that cannot activate microbial activity because of insufficient microbial nutrients • Wastewater that requires settlement and a steady state of activated sludge within a short period of time during trial operation and seeding • Companies in which it can be applied: food. papermaking. leather. dye. textile. printing. butchery. animal husbandry. and wastewater and sewage treatment plants |
Equipment | |
| 309 | Chelate Precipitating Agent | Chelate Precipitating Agent | Chorok Entech Co., Ltd. | 82-31-374-9460 | 1. Outline - Chelate is a ring-shaped complex ion which is formed by two or more coordinate bonds between a single ligand and metal ion. Chelate agent is the ligand composing the chelate. 2. Introduction 3. Character - Quickly respond to problems occurring in treatment plants. - Improve the quality of insufficiently treated wastewater due to overload or underload. - Adsorb and remove metal and heavy metal in wastewater by strong chelate coordinate bond. - Remove SS and COD in case of abnormal operation. - Effective prevention and early treatment of SV decrease. MLSS increase and Bulking in aeration tanks. - Double the efficiency of microorganism treatment in case of settling tank capacity deficit. - Directions: Aeration tank management: 5-20ppm/day Pin Floc occurrence: 20-50ppm/day .Bulking prevention: 50 ~ 100 ppm/day . 4. Application - Frequent occurrence of terminal effluent quality issue. - Insufficiently treated wastewater due to facility capacity deficit and overload. - SS occurrence and spill due to filamentous bacteria in settling tank. - Disturbance of microorganism activation due to non-biodegradable substance. - Poor quality wastewater failing to meet discharge standards. - Food. paper. leather. dye and textile manufacturing. dyeing industry. livestock farming and wastewater treatment plants. |
Instrument & Chemicals |
| 310 | Chemcassette? based toxic gas detector | ChemKey™ TLD | Honeywell Analytics Co., Ltd | http://www.honeywellanalytics.co.kr | 1. Outline - Portable toxic gas detector using Chemcassette? monitoring technology. By modifying ChemKey™ and Chemcassette? at the upper part of the device. it can monitor over 50 different gas types. 2. Introduction 3. Characteristics - Portable. able to monitor a broad range of toxic gases - Battery operated or line powered - Chemcassette? monitoring technology - Do not need modification - Provide variety of signal outputs - Able to monitor over 50 gas types 4. Application - Emergency response teams - R&D laboratories - Temporary facility monitoring - Personnel in charge of occupational safety and hygiene - Equipment maintenance crews |
Instrument & Chemicals |
| 311 | Chemical absorbent | Chemical absorbent | ECOPRO Co. Ltd. | http://ecopro.co.kr | 1. Outline - This product is made of metal. metallic salts. and/or organic matters impregnated on those with a large specific surface area such as activated carbon and alumina for improved chemical activity. It absorbs and thus removes undesired gases selectively by neutralization. chemical reaction. and catalyst reaction. 2. Introduction 3. Character 4. Application - Can be extensively applied to any industrial fields requiring better quality of air or water. - Home appliances: Air conditioner. air purifier. refrigerator and food Trash Can. etc. - HVAC: Heating. ventilation. and air conditioning System. - Household products. |
Instrument & Chemicals |
| 312 | Chemical Filter | Chemical Filter | ECOPRO CO., LTD. | http://ecopro.co.kr | 1. Outline - The manufacturing environment of semiconductors is affected by polluted fine particles. As even a trace of chemical pollution can influence their production yields negatively. This Highly Efficient Chemical Filer is recommended to realize pure and clean environment. 2. Introduction 3. Character - This filter removes various kinds of chemical pollution. known as the AMC (Airborne Molecular Contamination). which negatively affects the semiconductor manufacturing process. - High efficiency with a removal rate over 90% / Long life expectancy. - Customized filter at requested. - Light weigh.t - Excellent price competitiveness. 4. Application - Ultra precisive manufacturing process such as Semiconductor and LCD. - Industries with offensive odors and/or hazardous gas. - Hospitals. museums and any other public institutions requiring clean/pure environment. |
Equipment |
| 313 | Chemical integrated management system | Chemical integrated management system | TO21 Co., Ltd. | http://www.to21.co.kr | 1.Outline The system checks the discharge paths and quantities of the hazardous chemical substances to make the management of the chemical substances improved and to make the causes of losses of the business recognized and eliminates the repeated elements of the management to make the integrated management of the chemical substances effectively carried out. 2. Introduction 1) Development of managing model of chemical substances - Chemical substance database: physical and chemical properties. hazardous information. MSDS information. current quantity information - Chemical substance-related law information: 12 laws - Discharge capacity information: discharge source information. atmosphere. water system. soil discharge quantity. environment moving quantity - Facility information: specifications. characteristics. manager information. position information - Operation site safety-related DB - Personal information 2) Chemical substances MAP drafting - GIS system building - Completion of chemical substance integrated management system 3. Characteristics 1) Possibility of real time searching for chemical substance information 2) Image upgrade of the business 4. Application Business places and plants where hazardous chemical substances are employed. |
Consulting |
| 314 | Chemical Oxidation Technique | Chemical Oxidation Technique | SHINGANG HI-TECH CO., LTD | http://www.sgenv.kr/ | 1. Outline Peroxide. which exists in the polluted site or is artificially injected. produces Fenton’s Reagent that generates OH- Free radical by being oxidized with Fe+2 ion and liquid H2O2. 2. Introduction * Ex-situ equipment 3. Characteristics - Biological treatment - Widely applicable to chemical treatment by pre-treating highly-concentrated polluted soil. sub-soil spraying and ground spraying are both available using steam pipes - Have a maximum effect through optimal dilution of chemicals and controlling of spraying amount - Decompost concentrated sludge of pollutants - Apply the in-situ treatment technology 4. Application - Soil purification |
Technology & Process |
| 315 | Chip & Oil separator | Chip & Oil separator | Fine Inc. | http://www.fine-tec.com | 1. Outline - Chip and Oil separator 2. Introduction 3. Characteristics - Continuous treatment of large volume - Easy to operate - Compact and simple - Save energy and space - Low noise - No need any consumption - Absolutely good for the environment 4. Application - Oil and chip separation of machine tools |
Equipment |
| 316 | Chlorine Analyzer | FC400G | Da All Eng. | www.daalleng.co.kr | The FC400G non-reagent free available chlorine analyzer adopts the polarographic method. using a rotating electrode to continuously measure online the concentration of free available chlorine. The FC400G is a microprocessor-based. intelligent free chlorine analyzer whose development was based on Yokogawa's long experience with residual chlorine analysis. The FC400G is intended for measurements in the water distribution network. at pumping stations. water delivery points. schools. and public facilities. Features * One-touch simple calibration. * Output range can be arbitrarily set in the range of from 0-1 mg/l to 0-3 mg/l in the field. * Line segment output is available for output signals. * Easy confirmation of inter-electrode applied voltage/current characteristic (plateau characteristic). This allows understanding of the detailed sensor characteristics in the application. * Rotating electrode/ceramic bead cleaning has been improved to realize further effective and continuous automatic cleaning. * Easy-to-maintain (-clean) cell construction. | Equipment |
| 317 | Chlorine injection | Series FX4800/4900 | KC Samyang Water Systems Co., Ltd | http://www.syws.com | 1. Outline - This floor cabinet installed gas injection device supply maximum 8.000PPD(150kg/h) of chlorine per day. - Gas injection device is vacuum operated and in vacuum condition. gas is delivered from vacuum regulator to ejector/ monitoring valve equipment to maintain perfect safety for the system. 2. Introduction 3. Characteristics - Safe and reliable complete vacuum operation - New and sophisticated design - Overall approach for inner components - Composed of high quality materials - Variable capacity up to maximum 8.000PPD (150kg/h) - Automatic control based on micro processor - Accurate gas measurement of chlorine and sulfur dioxide - Installation of versatile vacuum controller - Seamless operation using automatic transition 4. Application - Sterilization of drinking water and urban sewage - Chloramine drinking water - Remove chlorine from textile manufacturing and wastewater emissions - Control bad odor or algae inside pipes. heat switchboard and cooling tower - Bad odor or algae control system - Treatment water for chemicals. pharmaceutical manufacturing or food(control washdown. can manufacture. bleaching and flavor) - Remove waste cyanide and chrome generated from metal finishing process |
Equipment |
| 318 | Chlorine injection system | Krebs-Electrochlorination system | Prima Ateck Co., Ltd. | http://www.primaind.co.kr | 1.Outline The chlorination system is seawater electrolysis equipment that is used to produce and store hypochlorous acid NaClO and inject it to a circulating water pump intake to thereby prevent eggs of birds or fishes from being cultivated in the cooling system of electric power stations. iron works. petrochemical facilities where a great large amount of seawater is used as cooling water for machines. Thereby. the electro chlorination system prevents the increase of flow path resistance of a circulating water system. the decrease of heat transmission rate of heat exchanger. and corrosion. 2. Introduction (see fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000227-2.jpg></center> <center>(Fig 1. Process system of Krebs)</center> 3. Characteristics 1) Economical advantages according to no need for large pre-processing equipment for scale protection 2) Economical advantages according to no need for acid cleaning equipment 3) No generation of corrosion and excellent durability enabling permanent use life 4) No generation of loss according to a relative large plate gap even upon flowing of foreign materials under 3 mm 5) No danger of explosion according to a 1% or less concentration of hydrogen in an electrolytic cell 6) No need for separate wastewater treatment like pre-processing medicines waste liquid and acid cleaning water treatment 7) Full auto operation and no need for operators 8) Integrated type and small-sized (half of other equipment) of structure. and reduction of construction cost 4. Application Electric power stations. iron works. petrochemical facilities where seawater is used as cooling water for machines | Equipment |
| 319 | Circle Valve | Circle Valve | JINWON Co., Ltd | http://jwepc.com | 1. Outline - The device obviating the need to rotate a fluid flow tube at a time of drilling guarantees safety. 2. Introduction - Materials ㆍ Main body: GCD 450 of KSD 4302(spheroidal graphite iron ) ㆍ Packing : KS M 6613 ㆍ Disk body: KSD 4302 ㆍ Disk rubber: KSM 6613 3. Character - Able to install valve as planned without the need to cut off tap water. - Able to save time without the need to rotate the fluid flow tube by interlocking disk into the drilling part of the upper side of the main body. - Small drilling area because it is not necessary to rotate main body. - Able to operate even in the face of objects that get in the way. - Low torque that can be repeated. opened and closed. - Applicable pressure : 10kg/cm3 4. Application - Maintaining leakage and repairing facility - Project to renovate - Project to construct block system - Repairing and replacing valve - Installing other emergency valve. |
Instrument & Chemicals |
| 320 | Circle Valve | Circle Valve | JINWON INC. | http://www.jwepc.com | 1. Outline • This valve can be easily and stably installed on a slope without shutting off the water. 2. Introduction 14Biz-119.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-119.JPG'>3. Character • Can be installed on a flat location without shutting off the water • Installs the disk into the perforation on the top of the main pipe without rotating the tee pipe. thereby enabling short installation time • Has no rotation of the main body and has a small excavation area • Workable in complicated obstructions • Has a low operating torque and enables repetitive opening and closing 4. Application • Industrial water. military facilities. downtown water supply. plant plumbing. and others |
Eco-Friendly Products |
| 321 | Circular rotating sludge collection system | Sludge collection system | Cheonbo Engineering Co., Ltd. | http://www.cheonbo.co.kr | 1. Outline Circular sludge collection system is easy to maintain and effective for collection of sludge which is settled under wastewater. setting pond of the wastewater treatment site or the bottom of sludge thickener. 2. Introduction - Mechanical specification ① Type: center rotating type (diameter size 10∼25 M) ② Surroundings rotating type (diameter size 20∼50 M) ③ Circumference speed: 1.5∼3 M/MIN 3. Characteristics It has a simple structure and is easy to operation and maintain. As mechanical electrical phosphorous security system. damage of the machine is minimized. Power rate cost is lowered by mechanical performance is efficiently controlled. 4. Application Sewage and wastewater treatment site | Equipment |
| 322 | Circular settling concomitant treatment device | WISEENTECH Co.,Ltd. | http://www.wtcom.co.kr/ | 1. Outline - Improving several problems in removing precipitations and concomitant. it removes floating matters. concomitant. and precipitations in waste water. The wasted water goes into screen tank and concomitants are removed in this stage. After removing precipitations from circular settling device. it emits treated water through the outlet. The concomitants are brought into upper part and precipitations are removed through ejector and separating device. 2. Introduction 3. Characteristics - Reduce 50% of installment area for removing concomitant and sand - Reduce operation expense - Reduce construction expense up to 30~50% - Reduce maintenance expense and high efficiency in removing sand - Clean precipitation by paddle and scrapper of circular settling device and minimize the precipitation of mud materials. - The location of inlet and outlet are not limited because the input water is emitted by overflowing precipitation plate. - Collecting concomitant with stepped structure screen and precipitation. which is crowded out with speed of incoming flows over 0.5m/s. it is very efficient to remove precipitation. - Organic matters are separated and removed from sand that it can be reused. 4.Application - Circular settling concomitant treatment device |
Equipment | |
| 323 | Circular settling equipment | WISEENTECH Co., Ltd. | http://www.wtcom.co.kr/ | 1. Outline - Circular settling equipment classifies precipitation by using Vortex principle. It mixes swirt process with inflow comes in circular settling equipment in swirl direction and the circulation of conical paddle and produces centrifugal force in precipitation. Therefore. it settles the precipitation. Circular settling equipment solved some problems which are caused when grit remover gets rid of precipitation in existing plant. 2. Introduction 3. Characteristics - Safe firming agent. which Hexavalent Chromium satisfies soil environment standard - Use recycled materials (PS coal) and contributes to circulatory society - Grains size of firming agent is thin and high efficiency on agitation that secondary mixing is not needed - Quick intensity revealed with absorption effect by fine porous structure (physical modification effect) - Safe working environment because it produces less firming heat. compared to traditional limed-based firming agent. - Can be used and dig again - Low-priced lime-based firming agent 4. Application - Circular settling equipment |
Equipment | |
| 324 | Circular sludge collector | Wonchang Entec Co., Ltd. | http://www.wontec.co.kr | 1. Outline & Application ① Central driven suspension type sludge collector: Central driven suspension type sludge collector is an equipment applied at initial and final settling tank and enrichment tank at water treatment related devices in sewage/ wastewater treatment facility. and the equipment is applied at settling tank with circular shape in civil engineering. The structure of this equipment uses driving device installed at the monitoring sector at the center of the settlement tank and rotates installed scraper arm to scrap and collect sludge on the floor with scraper blade attached to the middle of the floor of the settlement tank. ② Central driven pillar shaped sludge collector: Central driven pillar shaped sludge collector is an equipment applied at initial and final settling tank at water treatment related devices in sewage/ wastewater treatment facility. which is introduced at settling tank with circular shape in civil engineering. This structure scraps and collects the sludge on the floor of the settling tank at the center of the floor with scraper blade by rotating the scraper arm installed at Center Cage through the driving device installed at the Center Column in the middle of the settling tank. ③ Surrounding driven sludge collector: Surrounding driven sludge collector is an equipment applied at initial and final settling tank at water treatment related devices in sewage/ wastewater treatment facility. which is introduced at settling tank with circular shape in civil engineering. This structures scraps and collects sludge on the floor to the middle of the tank by rotating scraper ram installed at the center cage through the driving device installed at the outside of the settling tank. 2. Introduction ① Central driven suspension type sludge collector ③ Surrounding driven sludge collector 3. Characteristics ① Central driven suspension type sludge collector - Simple structure - Excellent collecting capacity - Convenient installation of deodorization cover - Low power consumption due to efficient equipment capacity ② Central driven pillar shaped sludge collector - Simple structure - Excellent collecting capacity - Convenient installation of deodorization cover - Low power consumption due to efficient equipment capacity ③ Surrounding driven sludge collector - Suitable for large scale settling tank - Simple machinery equipment |
Equipment | |
| 325 | CL Bio Contactor (CBC) Media | Clean & Green Environmental Engineering Co. | http://www. cngwater.co.kr | 1. Outline • CL Bio Contactor (CBC) Media is widely used in water treatment fields. It is a highly efficient water treatment system that uses the growth and decomposition of microbes. • It removes aliphatic organic matters or nitrogen components contained in water through contact with microbes. 2. Introduction 14Biz-118.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-118.JPG'>3. Character • It performs a filtration function through the fiber screen effect. • It has no media blockage. and it does not require the replacement of media. • It has a low-cost construction without changing the structure in remodeling and repair for advanced wastewater treatment and water quality improvement. • It does not manage microbes separately as it secures highly concentrated microbes using built-in media. Therefore. it is easy to maintain. • It reduces excessive sludge caused by auto-oxidation by securing highly concentrated microbes. • Media are semi-permanent because of its excellent chemical and abrasion resistance. 4. Application • Different types of wastewater treatment. gray-water treatment. nonpoint pollutant source reduction. removal of green algae. and others |
Eco-Friendly Products | |
| 326 | Clean CUBE | Clean CUBE | ECUBELABS | http://ecubelabs.com/ | <DIV><B>Compact your waste with solar energy and save up to 80%!</B></DIV><DIV> </DIV><DIV>1. Compact waste</DIV><DIV>Automatically compacts garbage so that it can hold-up-to 8 times that of standard trash cans.<br>2. Optimize collection routes</DIV><DIV>Monitor real-time bin fill-level. bin status. and analytics that optimize schedules and routes.<br>3. Collect the garbage</DIV><DIV>Plan ahead the collection routes to increase waste collection efficiency with CCN<br></DIV> | Waste Management |
| 327 | Clean room system | Clean room system | SuGong Tech Co., Ltd. | http://www.sugong.co.kr | 1. Outline - Applied to remove suspended particles in the air causing the serious interruption to the processes of research. development and production for 21st century’s technological development. A clean room is an environmentally enclosed and controlled space against temperature. humidity. air pressure. electrostatic control. illumination. etc. as well as suspended particles in the air. 2. Introduction 3. Character - An industrial clean room The required cleanliness of an ICR is various depending on each process for precision instruments. optical instruments. magnetic tape. photographic film. instant food manufacturing. packaging. specialty printing as well as semiconductor industry. A clean room needs to be comprised of a contaminated area. a semi-clean area and a clean area for the entire facility not to allow the inflow of dust particles from the outside. Prevent the transfer of air between spaces by entering and exiting through a PASS BOX or AIR SHOWER of an inter-area. and use a DAMPER in each area to prevent the backflow of air. - BIO Clean Room It is essential for a pharmaceutical industry and its basic research laboratory. an experimental animal-facility. an operating room of a hospital. and food manufacturing for processing meat. pastries and bread to follow the regulations for the production and quality control of medicines. 4. Application - Food Manufacturing Plant - Pharmaceutical Facility |
Technology & Process |
| 328 | Clean rotary filter | Clean rotary filter | Taset Inc. | 82-31-499-4421 | 1. Outline - The device is installed to be used as tertiary treatment facility removing fine suspended particles existing in secondary treated water at wastewater treatment center. or to be used to remove algae from source of potable water and used as reused water at farms 2. Introduction 3. Characteristics - Various options depending on water quality requirement - Automatic washing function - Compact structure - Simple installation and maintenance - Low maintenance costs 4. Application - Remove algae from source of potable water - Reused water at farms |
Equipment |
| 329 | Clenvi dust collector | Clenvi dust collector | Kumho Environment Co., Ltd. | http://www.ikumho.co.kr | 1. Outline - It is used mostly by treating the dust and it adapts air pulse zet or mechanical method. It is designed to suit at large scale workplace. - It has high efficiency and minimizes the possibility of disorder by making the structure light and simple. 2. Introduction 3. Characteristics - Capable of high speed filtration and compact structure. - Long filter bag life because of minimizing the partial wear and tear of filter bag by dust. - Able to operate in the high concentration of dust due to the gentle rate of climb of pressure loss. - Able to operate continuously and stably because of regular pressure loss by removing the dust continuously. 4. Application - Mineral factory. - Timber mill. - Cement factory. - Chemical factory. - Pharmaceutical factory. - Medical supplies factory. - Dye industry. - Paint industry. - Plastic industry. - Foods industry. - Feed factory. - Cereal factory. - Dust emission workplace. - Flour mill factory. - Fertilizer plant. - Other particle emission places. |
Equipment |
| 330 | CMF-s (Microfiltration equipment in sedimentation type) | CMF-s (Microfiltration equipment in sedimentation type) | http://www.dmpt.co.kr/ | 1. Introduction 2. Characteristics - Remove particles larger than 0.2um. 99.9% of bacteria types - Able to operate under low pressure - Treat various high concentration influents - Minimal space use 3. Application - Large plants. water purification plants. wastewater treatment facilities. - Wastewater reclamation and reusing system |
Equipment | |
| 331 | CO, NO2 and O3 meter | 200E, 300E, 400E | KINE INDUSTRY | http://www.e-kine.com | 1. Outline - These meters are used to measure fine dust. carbon dioxide. carbon monoxide. HCHO(formaldehyde). VOC. radon. airborne bacteria. asbestos and nitrogen dioxide. etc. in houses and public use facilities. Each of the meters is composed of a product that meets the indoor air quality process test method and a portable product. 2. Introduction 3. Characteristics - A user can select the range of 0-100ppb - 0-10ppb to operate(400E). - Continuous monitoring of 03 gas concentration in the air and indoor air(400E). - A user can select the range of 0-1ppm - 0-1000ppm to operate(300E). - Continuous monitoring of CO gas concentration in the air and indoor air(300E). - A user can select the range of 0-50 ppb - 0-120 ppm to operate(200E). - Continuous monitoring of NOx gas concentration in the air and indoor air (200E). - Continuous self diagnosis indication and alert in the case of disorder(applicable to the 200Es. 300Es and 400Es ). - Automatic temperature/pressure correction(applicable to the 200Es. 300Es and 400Es) 4. Application - Measurement of CO. NO2 and O3 |
Equipment |
| 332 | CO2 controller | CO2 controller | Soha Tech Co. Ltd. | www.soha-tech.com | 1. Outline This CO2 CONTROLLER automatically controls the amount of gas to maintain CO2 values set by measuring the amount of CO2 at a greenhouse or a house in which crops grow. 2. Introduction 3. Characteristics - Control of CO2 supply. ventilation fan. humidification. dehumidification. control of heater. control of a cooler - Method of control - ON/OFF control - Proportional control (Optional) - Control of a motor valve or a solenoid valve - Supply CO2 which helps and promotes growth of fruit vegetables 4. Application -Control of CO2 supply - Ventilation - Humidification - Dehumidification - Heater - Control of cooler |
Equipment |
| 333 | CO₂gauger | testo 535 | Seintek Co., Ltd. | http://www.seintek.co.kr | 1. Outline - CO₂ gauge for building engineer 2. Introduction 3. Characteristics - Long term monitoring using maximum value and average value - 2 channel infrared sensor - Long term stability - High accuracy - High reliability - Repetitive setting unnecessary - Practical accessory - Topsafe (stable protective case) wall holder that quickly fixes gauge and probe 4. Application - Accurate CO₂ gauge for building engineer - Fixed type CO₂transducer test on DCV - Monitors air quality in office - Gauges CO₂density in inflow and outflow ventilator duct |
Equipment |
| 334 | Coagulant | Ecofloc (wastewater coagulant) | Ecomaister Co., Ltd. | http://www.ecomaister.com | 1.Outline Ecofloc is non-organic coagulant that effectively removes chromaticity. organic substances. suspended solids. and so on and is applicable to a variety of sewage and wastewater treatments like dyeing wastewater. paper manufacturing wastewater. leather wastewater. livestock wastewater. life sewage. polluted stream treatment. etc.. without any many changes in the existing equipment. 2. Introduction (See fig. 1) |
Instrument & Chemicals |
| 335 | Co-Balan Vegetation Mat | Co-Balan Vegetation Mat | Taeha Co., Ltd. | http://www.etaeha.co.kr | 1. Outline • It is a salt damage–resistance vegetation mat for river revetment. vegetation greening. road slope. reservoir. detention pond. wetland creation. slope vegetation. etc. 2. Introduction 14Biz-100.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-100.JPG'>3. Character • Its mat uses biodegradable materials. • It provides a high initial survival rate for plantation species. • Its method maximizes the natural restoration ability of the ecosystem. • As the seeds are directly attached to the vegetation mat. additional works for seeding are not necessary. It also allows for uniform seeding. • The users can select the species of seeds to control the germination time based on the condition of the construction sites. • It can excellently protect slopes by preventing flooding caused by slope or embankment failures. 4. Application • Revetment revegetation • Revetment protection • Wall retaining and slope revegetation • Vegetation greening • Creation of wetlands • Slope vegetation for erosion prevention |
Eco-Friendly Products |
| 336 | COD analyzer | Da All Eng. | The constant monitoring of the chemical oxygen demand (COD) increases process safety and supports a load-based billing system for industrial wastewater treatment plants. An optional backflush pump provides reliable measurement even in inlet wastewater applications. The analyzer waste is split into dichromate and dichromate-free and ensures high environmental compliance. Field of Application Inlets of wastewater treatment plants Outlets of wastewater treatment plants Industrial wastewater discharges Surface water | Equipment | ||
| 337 | COD automatic measuring device | AW-5111 / AW-5115 | Dongyang Electro-systems Co.,Ltd. | http://www.ando.co.kr/ | 1. Outline - COD means an index that shows organic pollutants and is assigned as an object of limitation of total amount. AW-5111 COD automatic measuring device follows official test method “potassium permanganate in acid and 100 degree in Celsius” by Ministry of Environment. AW-5115 COD automatic measuring device follows sewage disposal method “potassium permanganate in alkali and 100 degree in Celsius”. Both methods operate measuring-measure COD concentration. record-drain-irrigation processes automatically. 2. Introduction 3. Characteristics - Measuring method approved by Ministry of Environment water quality TMS - Approved by National Institute of Environmental Research - Using both Acid and Alkali methods - Secure environment with alarm. security system - Various functions. record both digital and analogue - Measure 3 water system and 2 ranges - Simple operation and restoration - Long continuous operation - Automatic range and correction 4. Application - COD automatic measuring device |
Equipment |
| 338 | COD eliminator | CR-CLEAN | Chung Rok Chemical Co., Ltd. | http://www.chungrok.co.kr | 1. Outline General phosphorous organic matters are source of suitable nutrition for microorganism. However. recent synthetic organic matters containing difficult decomposing organic matters can’t be decomposed using general phosphorous treatment. This is the product. which decompose such organic matters. reducing COD and BOD. 2. Introduction Principle of CR-Clean COD elimination is using fenton method. Fenton method is using iron sodium as catalyst to generate (*OH) containing strong oxidizing capability to decompose organic matters within wastewater to bring COD down. CR-Clean decomposes organic matters by generating acid group with strong oxidizing capability when it is mixed with water in the liquid state. COD and BOD are reduced the preceding principle 1) Symptoms a. Exterior: white powder b. PH: weak acid 2) Parking measurement: 25 KG 3. Characteristics 1) Ease uses 2) No occurrence of Sludge. 3) Outstanding treatment efficiency. 4) No need for large system. 5) Easily dissolved in the water 4. Application Possible for all wastewater treatment | Instrument & Chemicals |
| 339 | COD meter | 942-060 | KINE Industry | http://www.e-kine.com | 1. Outline - COD which is an abbreviation for Chemical Oxygen Demand refers to the amount of oxygen required to oxidize pollutants in water chemically namely ‘chemical oxygen demand’. COD is used to indicate a degree that water is polluted. The higher COD level is. the heavier pollution is. The COD Meter is used to measure CODs in portable water. industrial wastewater and purification plants. 2. Introduction 3. Characteristics - Low price - Meet US EPA 410.4 Standard Methods 5220 - Built- in microprocessor - Autozero function - Reagent pretreatment is not required - Kinds ㆍCOD low range (5 ∼ 150 ppm) ㆍCOD middle range (20 ∼ 900 ppm) : recommended for use ㆍCOD high range (100 ∼ 4.500 ppm) 4. Application - Measurement of CODs |
Equipment |
| 340 | COD, n-H, ABS Remover | EB-100 | Joongang Chemical Co., Ltd. | http://www.joongangchem.com | 1. Outline - This is a special chemical compound which applies emulsion break to organic substances. such as micro suspended solids containing in various kinds of industrial waste water. oil stains smeared during work. or foreign matters. n-Hexane and things those surface active agents are in an emulsion state. and combines with other pollutants and non-biodegradable organics to form to insoluble substances. 2. Introduction - Outer appearance : Gray. black power - pH : Neutral - Main ingredient : Compounds including MONTMORILLONITE. - Flammability : N/A 3. Character - Removal of non-biodegradable COD provides metal cations along with hydrogen ions containing in waste water to absorb. oxidize. coagulate and treat degradable organic compounds. - Possible to use in the range of pH 3 ~ 11 because of good cohesiveness as an emulsion break agent. - Capable of improving quality of treated water because of its lasting emulsion break effect as a multi-purpose emulsion break agent. - Able to remove colors as well as removal of along with COD. n-HEXANE and negative ion surface-active agent ingredient(ABS) because of good reaction to non-biodegradable organic substances. - Effective in removing COD ingredients induced by n-HEXANE in the waste shapes.. - Effective in removing non-biodegradable organic substances and pollutants with high viscosity because of applying emulsion break first and then encapsulation in an ion boding state to non-biodegradable organic substances of emulsion. - No need to have an additionally prevention facility because of using a water-collecting tank or the first and second reactors as pre-treatment. 4. Application - Waste water in landfill leachat. - Waste incineration places and sanitary treatment plants. - Machines. metal processing and painting waste water. - Fat-removing. cleaning and film-containing waste water. - Cutting oil. conditioners and other rolling oil-containing waste water. - PCB and electronic part paining waste water. - Car cleaning yard and repair factory waste water. |
Instrument & Chemicals |
| 341 | COD/SS/OIL ANALYZER | oori Environmental Technology Co., Ltd. | http://www.wooritms.co.kr/ | 1. Outline • COD/SS/OIL ANALYZER is a 24-hour monitoring system that measures the environmental pollutant discharge concentration of water quality through an automatic meter and monitors pollutants discharge state for 24 hours by connecting the measured results above with the main computer in a control center. • It measures the COD. pH. flow rate. temperature. etc.. through the meter every 5 minutes and 30 minutes. 2. Introduction 14Biz-425_COD.SS.OIL_ANALYZER.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-425_COD.SS.OIL_ANALYZER.jpg'>3. Characteristics • It is a total water quality meter and measuring item that can be used selectively. • It measures the organic pollutant concentration contained in water by UV absorbance. • It is easy to maintain and measure in real time because UV method omits the oxidation dissolution process and applies UV absorption directly. • It has a continuous SS and OIL measuring system through the transmitted light scattering comparative method 4. Applications • Water quality monitoring system • Swimming pool water quality analysis • Wastewater analysis • Industrial water analysis |
Equipment | |
| 342 | CODRA System | CODRA System | Ilsong Co., Ltd. | http://www.ilsong.co.kr | 1. Outline Under the purpose of ‘ecological environment restoration.’ the CODRA System is a construction method which uses a “pioneer plant” to improve microclimate and soil condition. and therefore induces natural succession with a relatively short time and low cost. 2. Introduction 3. Characteristics - Formation of a mesh structure on slope through ideal combination with high polymer resins. - Maintaining ideal soil hardness (around maximum 25mm) for both plant growth and physical prevention of erosion and scour by rainfall and plant growth. - Chemical arrangement enabling a high nutrient and moisture holding capacity. - Using fully biodegradable materials only. 4. Application - Microclimate improvement - Soil condition improvement - Natural succession inducement |
Technology & Process |
| 343 | Coir Soil Bag | KC Rivertech Co., Ltd. | http://rivertech.co.kr | 1. Outline • It is a vegetation-based material made of coconut natural fiber • Mix soil and landscaping soil and fill them into the coir soil bag at the proper height. • Overlap and install the wings of coir soil bag using fixing pin so as not to expose the ground. • Fix the coir soil bag firmly using anchor bolt. - Penetrate the anchor bolt into the wings of coir soil bag. • Make sure that the hydraulic fill is stick vegetation. 2. Introduction 14Biz-141.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-141.JPG'>3. Characteristic • It is an eco-friendly product to minimize the exposure of ground by 100%. The planting density is high (9/each). and it returns to nature after a certain period of time. • You can install them with different shapes: pile. lay. etc. 4. Applications • Installed as a vegetation-based materials of flower bed • Applicable to easy slope |
Equipment | |
| 344 | Cold Heat Cutting | COLD CUTTING | DONG IL INTERNATIONAL LTD | http://www.i-dongil.com/ | 1. Outline Cold Cutting is a water friction cold cutting process without heating. flames. grinding. vibration. pressure on materials. or explosion risks of explosives or petrochemical pipes. 2. Introduction 3. Characteristics - As the head used in the cold cutting is very handy and can use electricity or diesel. it operates safely meeting the safety standard. - The cold cutting has no explosion risks or damages to the products even when it is operated with explosives because it does not cause flames or twists when cutting materials. - Each part of the system is made of materials suitable for the standard. - Video or remote controlled in 500m range - Easy to move and has no limitation in operation place 4. Application - Available for industrial. military. or civil engineering purposes |
Equipment |
| 345 | Collecting vapor device on refueling step | Dongmyung Ent. Co., Ltd. | http://www.dm-ent.co.kr/ | 1. Outline - Collecting vapor (VOC). which is emitted into the air during refueling. it returns vapor in a storing tank for preventing pollution. 2. Introduction 3. Characteristics - Supply the most reputable OPW component in the world market - Great price competitiveness with its own technology - Use two nozzles on one pump - Standing or ceiling type - National TUV certification on standing and ceiling type oiler - Qualified systems (ceiling. standing. centralized type) from Korean Environment Cooperation - Turnkey base construction with system installment and collection of pipes - Stable system maintenance and provides restore service 4. Application - Recovering VOCs |
Equipment | |
| 346 | Collection of dust | Multi Cyclone | Ecovic Co., Ltd. | http://www.ecovic.co.kr | 1. Outline - Leads comparatively thick particles with high proportion to flow in the tower cylindrical direction - Because it is exclusively used for dust of big size. certain performance can be conducted and is used as a preprocessing device of high-efficiency collectors for fine particles 2. Introduction 3. Characteristics - Capable of high-temperature processing and low pressure loss - Capable of dry collection and dust elimination and low operation costs - Applicable for coarse grain processing and has simple maintenance operation - Low collection efficiency when dust size is below 10㎛ - Processing of humid dust is difficult - Sensitive on amount of dust and flow change 4. Application - Boiler dust - Cement plants. stone processing. smelt processing. and dust with high dust concentration - Incinerator latter facility - Preprocessing of high-efficiency prevention facilities - Dust with big size - Wood factories and paper mills |
Technology & Process |
| 347 | Combination-type Constructed Wetland | Combination-type Constructed Wetland | ASSUM ECOLOGICAL SYSTEM INC. | http://www.assum.co.kr | 1. Outline Combination-type Constructed Wetland is a wetland used for water purification by artificially improving the purification capacity of natural wetlands. They have high adaptability to various pollution loads. and are economical as they require less energy and easily maintained. 2. Introduction 3. Characteristics - Comprised of sedimented pond ⇒ surface flow wetland ⇒ subsurface flow wetland - Improve elimination capacity of pollutants - Minimize operation and maintenance costs - Requires no expertise in operation of constructed wetland - Used in various ways such as ecological parks or nature exploration sites 4. Application - Ecological filter bed |
Technology & Process |
| 348 | Combined Heat and Power System | Combined Heat and Power System or Cogeneration System | ES ENERGY Co., Ltd. | http://eses.co.kr/ | 1. Outline - This combined heat and power system or cogeneration system pursues maximized energy efficiency by simultaneously generating heat and electricity from an energy source and appropriately providing energy by uses. In doing so. the system. aimed at high energy efficiency. contributes to increasing national competitiveness by efficiently managing energy facilities. 2. Introduction 3. Characteristics - The system boasts of high energy efficiency. - The system increases stability in electric supply. - The system contributes to environmental conservation. 4. Application - Generation system featuring a gas engine - Generation system featuring a gas turbine - Generation system featuring a micro turbine - Generation system featuring a fuel battery |
Technology & Process |
| 349 | Combustion gas analyzer | Maxilyzer NG | BYTECC | http://www.bytecc.com | 1. Outline - Equipment used to measure exhaust gas by environment and boiler companies. - Measured items : O2. CO. CO2. NO. NO2. Nox. and SO2 - With one maximum charge. the equipment can operate for up to 36 hours consecutively. Bluetooth application enables wireless communication. Maximum of 8 hour sampling in second intervals. Excellent portability with light weight of 2.8kg. Maximum of 10 lines displayed on the LCD. 2. Introduction 3. Characteristics - Able to measure maximum of 6 substances simultaneously in the O2. CO(H2).NO.NO2.SO2 and CO gases. through electrochemical cell. Minimize measurement errors and increase the longevity of sensors by automatically removing condensed water during sampling process by using heated hose and cooler. - High powered battery (6V/4.0Ah NiCd) enabling 24 hours of consecutive operations. - High data storage and speedy transmission. Connect to computer after storing data in the internal memory of 100 data block. - Obtained TUV certification based on environmental standards of Germany. - IP67 grade water/dust resistant. - Display of 10 lines on one screen along with screen multi tasking functions - Thermal transfer printer installation increases the speed of printer - H2 correction cell in order to achieve high precision CO measurement. - In the CO cell protection function range (0-4000ppm). CO sensor that has H2 concentration is cut off at 4000ppm. but other measurement cells are not effected. CO cell starts operation when the level falls below 1600ppm. - Measured value graphic expression and zoom function - Pressure measurement function (hpa. mbar. PSI. mmH2O. mmHg. inHg) - CO max display function - Macro function - Display that can be used as pressure gauge or digital thermometer. - Basic USB interface installation. Bluetooth installation (optional) enabling remote wireless data communication (max 10m) - Menu line structure modification function. - Hold function for measured data storage. 4. Application - Exhaust gas measurement. boiler combustion efficiency measurement. chimney gas discharge and temperature flow measurement |
Equipment |
| 350 | Combustion Gas Treatment System | Combustion Gas Treatment System | Donglim Eng Co., Ltd. | http://www.donglim-eng.co.kr/ | 1. Outline • It is an integrated system composed of a selective noncatalytic reduction (SNCR) system. a semi dry reactor (SDR). a lime supply system. an activated carbon injection system. and a bag filter. 2. Introduction 14Biz-75.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-75.JPG'>3. Character • SNCR (Selective Noncatalytic Reduction) system - A system used to reduce nitrogen oxides (Nox) and obtain harmless N2. It does not use a catalyst and instead uses a reducing agent. such as ammonia or urea. • SDR (Semi Dry Reactor) - A system used to pump a fine mist of CAOH2. which absorbs and removes the acidic gas produced during the combustion process. without discharging wastewater. • Bag filter - A system used to remove the solids. which are produced from the semi dry reactor. The activated carbon and lime will be injected into the front end contact with the waste gas while it remains attached to the surface of the cloth filter. in order to remove the acidic gas and dioxin. • Activated carbon injection system - An injector installed on the front end of the bag filter used to inject activated carbon and to absorb and remove dioxin. 4. Application • Incineration plants • Factories • Air pollutants treatment plants |
Equipment |
| 351 | Commercial water treatment system | Hyundai wacor tec. co. Ltd. | CAUTION 1. CARBON FILTER FLUSHING After the installation or changing carbon filter. Manual Flushing Valve shall be opened for 2~3 min before operation.(process: water flow for 2~3 min) 2. AUTO FLUSHING (RO MEMBRANE) - INSTALLATION STEP 1. Tubing connections on the back of products should be connected with each usage. (Inlet Water. Drink Water. Tank. Drain) But. If the tank is not a pressure tank. water. level switch must be set the tank separatly. 2. Carbon filter need to be flushing with manual flushing valve for 2~3 min the initial installation. 3. Set the local time of timer for BYPASS and BYPASS TIME you want. 4. Turn on the system. 5. Once pressure tank is filled up water and the system is automatically stopped. Faucet shall be opened and the stored water shall be out of the tank. - RO MEMBRANE Membrane Type: Polyamide Thin-film Composite Maximum Operating Temperature: 113'F (45'C) Maximum Operating Pressure: 125psi (8.6bar) Permeation flow rate(GPD) of RO membrane depends on the quality of raw water. | Energy | ||
| 352 | Compact membrane filtration system | Sungwoo Co., Ltd. | http://www.sww.co.kr | 1. Outline Sungwoo’s membrane purification system is a filter module with unique design. which is composed of Hollow-Fiber membrane. The activated surface area of this membrane is 49.98㎖ at its maximum. The device is an advanced purification device equipped with an ability to completely remove pathogenic microbes more than 0.01ml㎛ in diameters and heavy metal pollutants. 2. Introduction 3. Characteristics - Able to use hollow-fiber membrane for a long time - Available for dual operation of the membrane filter. either individually or by integrating the operation with other process - Simple treatment process and easy operation management using small installation space - Compact system. high efficiency and economically feasible. 4. Application - Underground water treatment - Small sized water treatment - Bank filtered water treatment |
Technology & Process | |
| 353 | Compact Metering pump | Dong-il M.T Co., LTD | http://www.dongilmt.com | 1. Outline This product is a compact model. Not like DW series. it works with 1 phase 110/220 voltage. The material of fluid part is consist of PVC. TEFLON. PVDF. SUS304.316. Therefore. user can choose the various material. The connecting way of suction and discharge is HOSE or flange. In case of flange. a buyer should demand it in advance due to the standard type is Hose. The range of Maximum capacity is from 50cc/min to 1200cc/min and operating pressure is 15kg/cm2. The difference between DS and DMA is the pressure and price. The DMA is more stronger than DS. It means DMA pump can transmit the fluid more far than DS pump. However it is more competitive price to choose DS pump instead of DMA if don't need a high pressure. Also for user's convenience. the accessories are included with the pump such as anti-siphon valve. foot valve. 3m-length hose. 2. Introduction Features: 1) compact design suitable for limited area. small space. not required much flow rate 2) All accessories such as anti-siphon valve. foot valve.3m length hose are provided with no extra pay. 3) It’s not only compact type but also reliable mechanism. 4) Eventhough pump is very compact. it works in such great pressure 15kg/cm2. Spac. : 1) Discharge capacity : 50cc/min ~ 1200cc/min 2) Material : PVC.SUS304.SUS316.TEFLON.PVDF 3) Motor : 1 phase. 60Hz.110/220v.IP44 (standard) 440V.50Hz.3phase.anti-explosion. waterproof motor in special order 4) 30% ~ 100 % adjust flow capacity 5) viscosity : below 1000cp 6) operation temperature: PVC(0~50). SUS(0~80) 7) connecting type: Hose type(standard). flange(optional) 3. Characteristics - Simple. Economic Vertical type Metering pump by rationalis tic design. - Extremely good life by long operation. - Can be injected small volum of liquid with accuracy/ (Tolerance limits : ±1%) - Can be done transporting injection by high pressure (Pressure limits : 150 kg/㎠ Max.) - The range of effective adjustment stroke: 20% ~ 100%) - Using temperature : 0℃ ~ 100℃ | Equipment | |
| 354 | Compact Wastewater Treatment Apparatus | Chang-Shin E&P Co., Ltd. | http://www.csplant.co.kr/ | 1. Outline • This is a compact water treatment system that is composed of different types of individual wastewater treatment apparatus to enhance the purification effect of the system at low costs. • The system is easy to install and fits well even in a narrow space. 2. Introduction 14Biz-91.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-91.JPG'>3. Character • There are several purification stages to the system. including the coagulant-induced sludge settling stage and the filtering stage. • This system is integrated into a compact wastewater treatment system. • The system is equipped with a seagull-shaped baffle to control the flow of wastewater. Instead of a free fall. the baffle induces a steady fall of wastewater into the settling basin resulting in maximized wastewater/sludge separation efficiency. 4. Application • Building wastewater treatment • Factory wastewater treatment |
Equipment | |
| 355 | Complex Air Filter | Complex Air Filter | CAMBRIDGEFILER Co., Ltd. | http://www.cambridgefilter.co.kr | 1. Outline - The general principle of fine dust removal is the same as a double-stage electrical charge type electric dust precipitator which charges fine dusts in the discharge electrode and removes electrically charging dusts through an electrostatic force in the collection part. But this Complex Air Filter employs a plasma charging method in order to solve problems of ozone occurrence. small particle size and low charging efficiency. 2. Introduction 3. Character - Dust collection by artificially charging airborne dusts and passing them through an electric field which is an electrical energy field. - High dust collection efficiency increasing the percentage above 99% and collection of fine dusts of less than 0.1um. - Comprehensive kinds of dust and mist collection. - Low required power due to low pressure loss. - Treatment of corrosive gases and dusts. 4. Application - Subway stations. buildings and industrial organizations. |
Equipment |
| 356 | Composer Elite | Inficon Co., Ltd | http://www.inficon.com | 1. Outline • Simple and reliable device to measure binary gas compound by adding Cp2 Mg to nitrogen and other low steam pressure material • Also. this device accurately measures speed of precursor and carrier gas. efficiently reduces process fluctuation. and improves efficient use of precursor materials 2. Introduction 14Biz-453_Composer_Elite.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-453_Composer_Elite.jpg'>3. Character • To reduce process fluctuation • To increase efficient use of precursor materials • To verify purification of gas line • To accurately measure rate of precursor to carrier gas • To verify the stability of precursor and dopant supply according to passage of time • Sensitive to Cp2Mg and other low steam pressure materials • To monitor up to 5 sensor with one control system 4. Application • MOCVD |
Energy | |
| 357 | Composing facility | Sequential dehydrating device based on rotating steam coil | Hankook Hi-Tech Co., Ltd. | http://www.ihitech.com | 1. Outline - Energy saving treatment facility which use waste heat produced from incinerators at city waste treatment facility by inserting into sequential dehydrating device based on rotating steam coil for composting. 2. Introduction 3. Characteristics - Significant energy saving by using waste heat produced from incinerators at waste treatment facility for large urban area or local authorities to be used at continuously dehydrating device based on rotating steam coil. - By using high efficient steam coil rotating continuous dehydrating device. it does not need diluting agent to control moist level and can minimize operation costs. - Automation of the facility by installing automatic control system can minimize operating crews. - Do not cause pollutions as bad odor from dehydrator and each storage hopper will be treated at wet cleaning tower. - Able to produce high quality compost by removing salt at pre-treatment processes 4. Application - It is high-speed treatment facility which can be installed and operated at locations which need large volume of treatment at waste treatment sites for large cities or local institutions. - Large restaurants. marine and food processing plants. schools. hospitals. offices. etc. |
Technology & Process |
| 358 | Composite Food Waste Disposer | Any-Q | http://any-q.com | 1. Outline • Recyclable new concept eco-friendly composite food waste disposer • Treatment Process - Tornado bubble grinding - Compression dewatering - 3D composite drying - Deodorization 2. Introduction 14Biz-468_Composite_Food_Waste_Disposer.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-468_Composite_Food_Waste_Disposer.JPG'>3. Character • Treatment Process and By-Product - Compression/dewatering posterior to bubble grinding using centrifugal force - Advanced high temperature 3D composite sterilization and drying - Recycling of sewage sludge containing effluent (no sewage discharge) - To absorb and reduce malodor by condensate with atomizing technique - To recycle final by-product • Recycling - Feed: Single ingredient (feed that livestock may eat without additional processing) - Fuel: Fuel through post processing of pellet - Composting: Compost posterior to drying 4. Application • To dispose household food waste |
Energy | |
| 359 | Compression Type PE Canning Sheath | Canning Sheath | Inno System Co., Ltd. | http://www.innosystem.kr | 1. Outline - Compression-typed polyethylene canning sheath 2. Introduction 3. Characteristics - Impact resistance - Chemical resistance - Corrosion resistance - Sanitary - Electric insulation 4. Application - Gas pipe (KSD 3589): LPG. LNG. City Gas - Oil pipe (KSD 3589): OIL - Water supply pipe(KSD 3565. KSD 8502) : drinking water - Agricultural water supply pipe (KSD 3565. KSD 8502) : agricultural water - Industrial water supply pipe (KSD 3565. KSD 8502) : industrial water - Petrochemistry plant (KSD 3589. DIN 30670) : raw oil transportation - Steal pipe for underwater piles (KSD 3589) : undersea fixed pile - Other underground buried pipes (KSD 3589. KSD 3565) |
Equipment |
| 360 | Concentration Catalytic Oxidation | Concentration Catalytic Oxidation | Kim’s Skill For Green Co., Ltd. | http://www.ksgplant.co.kr | 1. Outline - Concentration Catalytic Oxidation is a system that combines an adsorption method which is adsorption removal of volatile organic compounds (VOCs) with an absorbent with a catalytic oxidizer for regeneration treatment of an absorbent and its function is basically similar to an adsorption treatment method. The principle of this system is to remove or recover VOCs primarily with an absorbent which are relatively emitted in high air volume and in low concentration and then secondarily separates VOCs adsorbed by an absorbent in low air volume and in high concentration and then treats VOCs through oxidation and decomposition with a high efficiency catalytic oxidizer. 2. Introduction 3. Characteristics - Inexpensive installation cost compared to high treatment efficiency - Maintaining constant treatment efficiency for VOCs due to a function of absorbent regeneration treatment - Increasing treatment efficiency to up to 95% according to the selection of an absorbent - Requiring minimum maintenance cost due to the reuse of regenerated absorbents - Easily applicable to the treatment of discharge gases in large volume - No secondary pollutant including NOx and Sox 4. Application - Removal of Volatile Organic Compounds (VOCs) |
Technology & Process |
| 361 | Condensate polishing plant | Condensate polishing plant | Hankook Jungsoo Industries Co.,Ltd. | http://www.haji.co.kr | 1. Outline - This condensate polishing plant maintains reliability of a steam generator. makes it possible to operate even though there is leakage of sea water in condenser. prevents deposition and corrosion in turbines and reduces cost and time. 2. Introduction 3. Character - Multi treatment using CPP. -Pretreatment filter removes sediments. fragment. total iron and pollutants. - Remove sediments in cation stripper. fragments. total iron. cation and ammonium ion in condensed water untreated. - Mixed stripper removes cations from the condensed water partly treated by using ion exchange resin. Anion resin removes sulfate ion and hydrochloric acid ion. 4. Application - Desalinization plant |
Equipment |
| 362 | Cone type dehydrator | Cone type dehydrator | Dream Bios Co., Ltd. | http://www.dreambios.com | 1. Outline - Cone type dehydrator 2. Introduction 3. Characteristics - Improving the dehydrating efficiency by compressed dehydrating method - Controlling the dehydrating efficiency by adjusting the outlet - Strengthening the durability by adapting the punching net - Separating the minute particles such as seeds which can be settled at the bottom of anaerobic digester 4. Application - Separating the solids and liquid |
Equipment |
| 363 | Constant Feed Weigher | Constant Feed Weigher | Sambo Co.,Ltd. | http://www.sbcorp.co.kr/ | 1. Outline - Easy maintenance and stable supply feeder with road cell method. Fixed quantity supply system controls the amount of supply on the belt from source restoring hopper. It controls the speed of conveyer and supplies the sources to satisfy aimed volume transport. It needs at the field for managing quality and heat and it enhance the productivity. 2. Introduction 3. Characteristics - Using chosen road cell. it makes accurate measurement. - The declination of measuring roller is low that it doesn’t affect the change of belt tension. - Simple structure and dust resistant and wear - High safety. reliability and easy maintenance - High zero sensitivity that it is easy to manage and improves practicality 4. Application - Waste treatment. cement. fertilizer. metal |
Equipment |
| 364 | Constructed Wetland | Constructed Wetland | Mirae G&C Co. Ltd. | http://www.mrgnc.com/ | 1. Outline • This is a constructed wetland technology often used for the purification of polluted soil and ground water. as well as for immobilized substances used in sewer treatment facilities. With this technology. the direction of the water flow is placed vertically parallel with the reaction layer to purify the soil or other immobilized substances. • It is an eco-friendly technology that uses microorganisms in the constructed wetland. The microorganisms used have high pollutant removal efficiency. Its installation also requires only a small place. 2. Introduction 14Biz-28.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-28.jpg'>3. Character • It only requires a small place. • It provides a stable removal process of nutritive substances using a selective construction of its reaction layer. • The reaction layer is composed of humus soil. in which nitrogen and phosphorous are removed. or zeolite. woodchip. and polyurethane foam. which can efficiently nitrify and denitrify the pollutants. • It has a diverse range of applications depending on the removal target. • A constructed wetland technology combined with soil/ground water restoration technology making the best use of resource and site to treat waste water. leachate and non-point pollutant source by removing the nutritive substances in water 4. Application • Waste water treatment • Leachate treatment • Non-point pollutant source treatment |
Technology & Process |
| 365 | Recycled Remicon Process | Waste ready-mixed concrete recovery system | SAMDUCK HIGH-TECH | http://www.samduckeng.co.kr | 1. Outline What is the Waste ready-mixed concrete recovery system? Ready-mixed concrete factories have much difficulty in financial support for treating waste water and aggregate from ready-mixed concrete truck cleaning. Recently. advanced countries such as Japan is using our system that can give 100%recycling capacity. Japanese Industrial Promotion Office regulated sludge water use according to modification JIS A5308 in 1975. And Korea Industrial Promotion Office also regulated 3% sludge water density. We provide incompatibly inexpenseve waste ready-mixed concrete recovery system with brillant know-how and design technique. Also you can get every techinical consultation. manual. and support with our dispatched experts. We hope to improve our products and give our customers best satisfaction. 2. Introduction <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000044_2.jpg><br>Fig. 1. Process.<br></center> 3. Characteristics - Since the waste water flowing out from ready-mixed concrete factory can be completely recycled. - Complete recycling of waste water make us save industrial water. - Since gravel and sand are sorted and reused repectively. the prime cost can be cut down. - No workers are required to operate. because of the automatism for all processing facilities. - Economical cost of construction and perfect construction minimize the establishment area. perfect A/S should be quaranteed for you. 4. Application <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000044_3.jpg></center> | Equipment |
| 366 | Indoor Environment Consulting | Indoor Environment Consulting | Ji Hyun Engineering Co., Ltd. | http://www.jihyuneng.co.kr | 1. Outline We detect problems by measuring and evaluating indoor air quality. temperature. humidity. indoor air pressure and airflow and suggest improvement plans and perform indoor environment consulting according to the below process to make indoor air quality substantially better with checking efficiencies between before improvement and after improvement. 2. Detection of problems of indoor air environment in buildings <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000088_1.jpg></center> <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000088_2.jpg></center> 3. Diagnosis Targets & Evaluation standards <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000088_3.jpg></center> | Consulting |
| 367 | Container RO. | Container RO. | Hyosung Goodsprings Co., Ltd. | http://www.hsgoodsprings.co.kr | 1. Outline - The Containerized RO is the best solution for construction. hotels & resorts. pilot test facilities. temporary water-treatment facilities and any places where quick extension is needed due to an increase in water supply because it is able to supply water in a quick. convenient and swift way. 2. Introduction 3. Character - Easy transportation and installation because of its container type. - Efficient space management through compact installation. - Full automatic operation system. - Remote monitoring / controlling system. 4. Application - For temporary. and emergency use - Any region where water or drinking water is limited - Pilot test |
Equipment |
| 368 | Container Solvent Recovery System | Container Solvent Recovery System | Il Shin Environmental Engineering Co., Ltd. | http://www.okilshin.co.kr | 1. Outline - Container Solvent Recovery System treats exhaust emissions generated from a manufacturing process by absorbing and desorbing VOC gas. and recovers organic container solvent. It not only recovers the materials but also create more pleasant working environment. 2. Introduction 3. Characteristics 4. Application - Electric and electronic parts recovery - Automobile parts recovery - Precision machinery parts recovery - Volatile solvent recovery |
Technology & Process |
| 369 | Continuous Emissions (Chimney Gas) Automatic Monitoring System | Gasmet CX-4000 | Sowon Environmental Technology Co., Ltd. | http://www.esowon.co.kr | 1. Outline - An industrial multi-component emission gas analyzer for simultaneous analysis of up to about 350 different gas compounds including HCl. HF. NH3. CO. SO2. NOx. VOC. Formaldehyde. Hydrocarbon series 2. Introduction 3. Characteristics - FT-IR (Hot-Wet) Type with no moisture removal device required - Measuring items: simultaneous analysis of up to 350 different gas compounds including SO₂. NOx. CO. CO₂. H₂O. HCl. HF. NH₃. HCN. Hydrocarbon series and etc. - Accurate data measurement with ruling out the interfering substances such as moisture in the area of IR wavelength - Qualitative and quantitative analyses of organic/non-organic substances - No calibration gas required - The sample gas cell can be heated up to 180 °C so as to block any loss of sample gas completely. 4. Application - Combustion Incineration Process - Surrounding gas monitoring by thermal treatment - Boiler (Steam Boiler. Power Generation Boiler) - Hydrochloride manufacturing process - Oil refinery facilities. C2H4 manufacturing process and a number of others |
Equipment |
| 370 | Continuous Microfiltration System | D.M. Puretech Co., Ltd. | http://www.dmpt.co.kr/ | 1. Introduction 2. Characteristics - Remove particles larger than 0.2um. 99.9% of bacteria types - Stable treated water quality despite water quality change in source water - Able to treat large volume with compact sized equipment and convenient to expand - Easy to manage and convenient maintenance 3. Application - Large plants. water purification plants |
Technology & Process | |
| 371 | Continuous Nitrogen and Phosphorus Meter | DaAll.Eng Inc. | www.daalleng.kr | 1. Outline • The continuous nitrogen and phosphorus meter measures the total nitrogen and phosphorus content in water continuously through absorption photometry. • The TN/TP integrated-type equipment component is available. 2. Introduction 14Biz-433_Continuous_Nitrogen_and_Phosphorus_Meter.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-433_Continuous_Nitrogen_and_Phosphorus_Meter.jpg'>3. Characteristics • Oxidizes samples at high temperature and pressure using the microbatch chemical analysis and measures them. • Minimizes the amount of the sample and reagent usage to make replacement time longer • Monitors each part in every analysis to self-diagnose the state of the operation and the malfunction of equipment 4. Application • Wastewater treatment plant • Sewage treatment plant • Water treatment plant • Laboratory |
Instrument & Chemicals | |
| 372 | Conti-TDS | Conti-TDS | Duk Young Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Outline Based on in-line mixer principle. Conti-TDS absorb the powder from paper sack. powder hopper. container. barrel and big bag or silo. mix and dissolve with liquid 2. Introduction 3. Characteristics - Simple installment. highly efficient on dispersion - Put materials into mixing tank without powder - Reduce the size of powder particle with mill function - No precipitation or chunks of materials - Put materials into mixing tank without powder - Pumping with tank. liquefying divisions - No danger of fire or explosion since the divisions is liquefied into tank 4. Application - Mix and dissolve powder and liquid - Mix different liquid - Process of producing resin in chemical factory - Process of producing optical fiber in electronic factory - Process of producing battery sludge - Process of producing food materials - Process of producing ink and paint - Process of producing grease and lubricating oil - Process of producing papers - Process of producing ceramics |
Equipment |
| 373 | Conveyer | Conveyer | TAEKYUNG Co., Ltd. | http://www.tknt.co.kr/ | 1. Outline • It is a unit to transport the cake or impurities generated from dehydrators. drum screens or wedge screens by using screw wings. 2. Introduction 14Biz-52.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-52.JPG'>3. Character • It can transport cake or impurities even in complex pathways. • It is highly portable (vertical length: 40 m horizontal length: 120 m). • It requires a small installation space. • It has a semi-permanent service life. • It operates automatically and can be controlled easily. • It keeps the machine interior and the pipe clean with air and water to prevent clogging. 4. Application • Pneumatic conveyor • Cake hopper • Shaftless screw conveyer • Drum screen |
Eco-Friendly Products |
| 374 | REENTEC ENG | 1. SHAFTLESS SCREW CONVEYOR It is an equipment which feeds various mixed matter or wastewater sludge. The structure of equipment is compact and it is available to prevent odor spread. 2. FEATURE Compact design. easy install and space-saving Slope transfer with ease Prevent odor & insect approaching (Closed-type) Clean surrounding area 3. APPLICATION Waste disposal plant(food waste & industrial waste) Fish factory Wastewater disposal plant(urban. factory sludge & etc.) Animal feed factory Paper mill Food factory(dried. semi-dried. stincky material & etc.) Incineration(civil engineering waste. ash. powder & etc.) Chemical factory(compost. plastic. granule &etc.) | Equipment | |||
| 375 | Enclosed Type Cooling Tower | Enclosed Type Cooling Tower | Gyeongsang National University | http://www.gsnu.ac.kr | 1. Outline - Models for the high-performance ejector and evaporation-type tank of low-vacuum enclosed form - Auxiliary system for the main system such as water distributor. heat exchanger. water-vapor separator. etc. - Development of low-vacuum enclosed-type cooling tower system and endurance test 2. Introduction 2-1. Model for evaporation-type tank of low-vacuum enclosed form - Model for evaporation-type tank - Volume: 568 Liters - Material: STS304 - Thickness: t=10mm - Leakage performance: Less than 2nmmHg/hr <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=227_2.jpg></center> 2-2. Development of model for high-performance ejector - The optimum ejector system is determined through the standard analysis on the performance of more than 8 forms. - Low-pressure performance: 30-50 mmHg - Structure: Separated structure with nozzle. divergent pipe. absorption pipe. and so on <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=227_3.jpg></center> 2-3. Design of high-performance ejector - By setting the strut of a specific size at the exit of divergent pipe. an ejector with more than 40% increase in the performance is proposed. - When the divergent pipe is relatively big (Divergent angle=12.2 degrees). the loss of big eddies always occur around the wall. - The efficiency of the ejector is improved by the flux control. - Method: Flux control of downstream - Efficiency: Reduces pressure by more than 40% <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=227_4.jpg></center> 2-4. Auxiliary equipment for the test of cooling ability by evaporation - The following components are developed in order to develop the heat exchanger in the enclosed tank of low vacuum and the cooling tower system. - Water distributor - Heat exchanger in the enclosed tank of low vacuum - Analysis of the structure of the tank through changes in pressure and temperature - Water-vapor separator - Technique that reduces the temperature by more than 20% depending on the concentration position 3. Characteristics - It is a system that reduces the loss of cooling water by forming the cooling tower with low-pressure type of enclosed form using the technique of pure latent heat of evaporation. 4. Application - Reducing the water consumption of cooling tower - Exporting the technique of low-vacuum design - Expecting the extensive effects of techniques related to technique that use the latent heat of evaporation - Developing the summer water cooler of inland aquaculture - Developing the cooling technique for the hot wastewater from the nuclear power plant - Appling to the cool water supply system in other industries | Equipment |
| 376 | Cooling Tower | DHG-RO(FRP ROUND TYPE) | DHTech Co., Ltd. | http://www.dh3321.com/en | Equipment | |
| 377 | Cooling Tower | DHG-CR(CROSS TYPE) | DHTech Co., Ltd. | http://www.dh3321.com/en | Equipment | |
| 378 | Cooling Tower | DHG-CU(COUNTER TYPE) | DHTech Co., Ltd. | http://www.dh3321.com/en | FILLER OF HIGH EFFICIENCY The weak point which the cooling water leaned to one side is removed by the air velocity which is sucked and the head exchange efficiency is maximized. The interval maintenance method of filler was especially designed and the air resistant minimized. -THE DUPLEX DISTRIBUTION SYSTEM We improved the efficiency of heat exchange by jetting out the cooling water sufficiently through the SPRIAL TARGET NOZZLE and the DISTRIBUTION EQUIPMENT which is added at the top of the filler. -WIDE AIR TRAVEL The width of filler was made longer. -THE PROFITABLE DESIGN OF AIR FLOW Optimum arrangement in fan and filler removed DEAD SPACE of air flow and promoted the efficiency. -FAN OF HIGH EFFICIENCY -WE ADOPT FRP AXIAL BLADE OF HIGH EFFICIENCY -THE EQUIPPED HOOD ON THE TOP OF THE FAN STACK CHECKED A SCATTER AND REDUCED A NOISE -CASING AND WATER BASIN DECRESE WEIGHT USING THE QUALITY OF MATERIAL. CORROSION OF STRUCTURE IS PROTECTED BY HOT DIP GALVANZING -IT HAS NICE LOOK FOR HARMONIZE WITH ANY PLACE | Equipment |
| 379 | Cooling water germicide | LEGIO-CIDE (Cooling water germicide) | Cheonsei Industry Co., Ltd. | http://www.cheonsei.co.kr | 1.Outline The product includes principal components like medicine oxidization germicide PVP –12 and non-oxidization germicide BTC-2125M. exhibiting a high degree of safety. 2. Introduction It has excellent corrosion resistance and scale suppression performance. without any addition of corrosion inhibitor like phosphate and silicate and scale regulator that may form secondary pollutants. In case where Legio-Code II only for removal of slime is applied to remove the slime in the heat exchange circulating water in cooling tower or industrial complexes. the germicide PVP - 12 can be recycled. which proves the product is environment -friendly. 3. Characteristics 1) Strong sterilization : I2. BTC 2) Wide range of antibiosis : I2 3) Rapid efficiency of sterilization : I2 4) Continuation of sterilization : PVP. BTC 5) Corrosion resistance : PVP 6) Prevention of scale : PVP. EDTA 4. Application Sterilization of heat exchange circulating water in cooling tower or industrial complexes. | Eco-Friendly Products |
| 380 | Crusher | Crusher | SHRETECH Co., Ltd. | http://www.shretech.co.kr/ | 1. Outline - SHRETECH’s crusher is designed to crash selected waste materials by given size and to promote the operation of ROF by operating a brand new mechanism. In doing so. the technology is used to efficiently crash various targeted waste materials to properly respond to post-treatment process. 2. Introduction 3. Characteristics - The system features a hydraulic pressure system with an impeccable magnetic protection hydraulic pressure circuit by incorporating a low-speed high-torque hydraulic pressure motor. increases or decreases Torque based on crushing targets and is capable of adjusting rotary power in a corresponding way. - The system features a corrosion-proof and impact-resistant knife by using high-strength materials and heat treatment. - The system is used to crush various industrial waste materials in a pre-treatment process. - In loading the high-tech control system featuring controls and motors involving magnetic protection circuits. the system is capable of automatically protecting the equipment by rotating head-on and in a reverse way. - The system features a knife designed to operate and adjust target size based on the target size. - The system may be used for multiple purposes based on special design customized to target size and by adjusting granule size. - The system is designed in a way that makes it easy to assemble and disintegrate during maintenance 4. Application - Waste synthetic resin - Waste tire - Waste wooden materials - Root - Waste furniture - Appliances |
Equipment |
| 381 | Cryogenic blower | Cryogenic blower | Neuros Co., Ltd | http://eng.neuros.com/ | <DIV> </DIV><h5 style='text-align: justify; color: rgb(255. 153. 0); text-transform: none; text-indent: 0px; letter-spacing: -1px; font-family: Roboto Condensed. sans-serif; font-size: 24px; font-style: normal; font-weight: 600; margin-top: 40px; word-spacing: 0px; white-space: normal; orphans: 2; widows: 2; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;'>Cryogenic blower</h5><table width=100% style='margin: 0px; padding: 0px; text-align: justify; color: rgb(34. 34. 34); text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Roboto Condensed. sans-serif; font-size: 12px; font-style: normal; font-weight: 400; word-spacing: 0px; white-space: normal; orphans: 2; widows: 2; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;' border=0 cellspacing=0 cellpadding=10><tbody style=margin: 0px; padding: 0px; font-size: 12px;><tr style=margin: 0px; padding: 0px; font-size: 12px;><td valign=top style=margin: 0px; padding: 0px; font-size: 12px; colspan=3><DIV><strong style=margin: 0px; padding: 0px; font-size: 12px;>This product is a core component of closed-circuit thermal control system. which is used to verify the performance of a satellite component. and it can circulate both high and low temperature fluid</B></DIV><DIV><B></B> </DIV><table width=100% style='margin: 0px; padding: 0px; text-align: justify; color: rgb(34. 34. 34); text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Roboto Condensed. sans-serif; font-size: 12px; font-style: normal; font-weight: 400; word-spacing: 0px; white-space: normal; orphans: 2; widows: 2; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;' border=0 cellspacing=0 cellpadding=10><tbody style=margin: 0px; padding: 0px; font-size: 12px;><tr style=margin: 0px; padding: 0px; font-size: 12px;><td width=15% align=center valign=top style=margin: 0px; padding: 0px; font-size: 12px;><strong style=margin: 0px; padding: 0px; font-size: 12px;> Features</B></td><td valign=top style=margin: 0px; padding: 0px; font-size: 12px;><hr style=height: 0px; overflow: hidden; border-bottom-color: rgb(204. 204. 204); border-top-width: 0px; border-bottom-width: 1px; border-left-width: 0px; border-bottom-style: solid;>• Centrifugal compressor<br style=margin: 0px; padding: 0px; font-size: 12px;>• Single stage<br style=margin: 0px; padding: 0px; font-size: 12px;>• High speed PMSM. Speed control by VFD<br style=margin: 0px; padding: 0px; font-size: 12px;>• Water cooled insulating device<br style=margin: 0px; padding: 0px; font-size: 12px;>• Seal applied to prevent fluid leak<br style=margin: 0px; padding: 0px; font-size: 12px;>• Possible to apply working fluids in various ways (Argon. helium. oxygen. etc). to expand its uses for metal. medical treatment. and solar battery.</td></tr></tbody></table><DIV><B></B> </DIV></td></tr></tbody></table> | Water Treatment |
| 382 | CSBR | CSBR | GETC Co., Ltd. | http://www.getc.co.kr | 1. Outline - CSBT. a batch type continuous sewage treatment process. increases a removal rate of nitrogen and phosphate without a second sedimentation tank by combining the advantages of an improved A2O process and a SBR(Sequencing Batch Reactor) process. It is the stable and effective process applied to city sewage and industrial waste water treatment. 2. Introduction 3. Character - Stable removal of nitrogen and phosphate. - Stable removal of nitrogen and phosphate by combining advantages of an improved A2O process and a SBR process. - Excellent reaction to changing water quality. - In order for effective reaction to long-term changes of water quality. operation time is conditionally set for each aerobic/anaerobic/sedimentation tank. - Economical process. 4. Application - Sewage treatment plant |
Equipment |
| 383 | CSBR(Constant level Sequencing Batch Reactor) | CSBR | Green Environmental Technology Co., Ltd. | http://www.getc.co.kr | 1. Outline - Advanced and continuous sewage batch treatment process - It improves the removal efficiency of nitrogen and phosphorous by mixing the improved A2O process and SBR process. - It is suitable to the urban sewage and industrial wastewater by stable and efficient advanced treatment process. 2. Introduction 3. Characteristics - Simultaneous removal of nitrogen and phosphorous : it removes the nitrogen and phosphorous by mixing the advantages of the improved A2O process and SBR process. - Excellently dealing with the change of water quality : it is available to deal with the change of water quality by controlling the operation time of aerobic/anoxic/settling tank. - Economic process : it is available to minimize the installation space because the secondary settling pond is not needed. 4. Application - Sewage treatment plant - Wastewater treatment plant |
Equipment |
| 384 | Curb Filter(RF) | Curb Integrated Road Nonpoint Pollution Treatment Device | SHINGANG HI-TECH Co. , Ltd | http://www.sgenv.kr/ | 1. Outline This curb integrated road nonpoint pollution treatment device is an eco-friendly technology. which provides a curb-integrated inlet of nonpoint pollution sources. purifies storm-water by passing the treatment box composed of a filter cartridge and a dirt box and finally discharge the treated water into the surrounding vegetation areas. 2. Introduction 3. Characteristics - Remove nonpoint pollution materials under the parking lot pavement - Easy to install due to the curb mounted on the upper of the nonpoint pollution treatment box - Install two filter cartridges facing each other with an interval in the treatment box - Install a dirt box on the upper of a filter cartridge box to remove the contracted foreign materials - Easy to fix the filter cartridge using a side supporting part - Discharge the treated road surface run-offs using a bottom supporting part 4. Application - Nonpoint pollution reduction facility |
Technology & Process |
| 385 | Current flow meter (SCD) | SCM 2500 / 3500 XRD | Dongmum Co., LTD. | Characteristics Measuring Principle Measuring the net charge of sample. - To stay of the water build up electro kinetic Streaming current use measurement. Specifications A patented sensor Dragon is the replacement probe & piston Take your own table sensor Minimize the pollution sensors Alarm clock output high - low Smart trac pid control (35 xrd scc) Electrical parts and separation complete sample flow A patented sensor Dragon is the replacement probe & piston Take your own table sensor Minimize the pollution sensors Alarm clock output high - low Smart trac pid control (35 xrd scc) Electrical parts and separation complete sample flow | Equipment | |
| 386 | CUT CRUSHER | TOP-03-CC, TOP-05-CC, TOP-10-CC, TOP-20-CC, TOP-30-CC, | Hankook P.M Eng Co., Ltd. | http://www.topcrusher.co.kr/ | 1. Outline - Various blade shapes and blade arrangement lead to great performance - Large amount of material pulverization using little power - Selection through screen - Easy move and operation - Easy cleaning and maintenance thanks to one touch mode 2. Introduction 3. Characteristics - Materials are crushed between ROTOR and KNIFE - It is possible to adjust arrangement of fixed blades to change size of materials after crushing. - It is easy to look into crushed materials through a SCREEN. - Shapes of rotors can be various. - It is possible to create a product with fixed blade 2 EA TYPE and 5 EA TYPE. 4. Application - CUT CRUSHER |
Equipment |
| 387 | Cutting Oil Cleaner YCC | YHB Co., Ltd | http://www.yhb.co.kr | 1. Outline • Coolant Cleaner YCC-30 used for cleaning of a machine tool (CNC lathe. MCT. grinder) which uses cutting oil • To greatly improve working environment by liquid circulating system 2. Introduction 14Biz-457_Cutting_Oil_Cleaner_YCC-30.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-457_Cutting_Oil_Cleaner_YCC-30.jpg'>3. Character • To prevent decomposition of cutting oil and malodor generation • To prevent blockage of nozzle and pump which supply the machine tool with the cutting oil • To reduce tool costs and to improve illumination intensity on a processed surface • To prevent parts and machine tool from being corroded • To reduce cutting oil and cutting tool costs • To be able to clean a bottom of a tank with strong absorption power • To reduce cutting oil replacement costs and waste treatment costs 4. Application • Machine tool using cutting oil - CNC lathe - MCT - Grinder |
Instrument & Chemicals | |
| 388 | Cutting Oil Purifier System | Cutting Oil Purifier System | Fine Inc. | http://www.fine-tec.com | 1. Outline - Clean machining oil enhances product quality and productivity as it extends the life expectancy of equipments and tools. dramatically reduces the product’s defect rate and makes the holding time short for restart. 2. Introduction 3. Characteristics - The equipments makes the post-process of sludge very simple. as it solidifies to separate small particles like large amount of abrasives. glasses. carbon. aluminum. stainless steels. and ceramics that are not easily removable by magnetic separators and other filters. - There can be seen no defects from scratches during grinding. - Unlike paper filter. filter process or other filters. consumables are not required. - Properties of special oil do not change. there is a little waste of liquid oil and prevent aging from heat. - No extra feeding pumps are necessary when draining the fluid. - The separator lowers temperature of water-soluble liquid and prevents decay. 4. Application - Oil purification and chip separation of several machine tools - Purification of machining oil and chip separation of machining equipments relate to semiconductor - Elimination of mud. sand. and other solids during drainage process |
Technology & Process |
| 389 | Cutting oil recycling system | Coolant Recycling System (CRS) for cutting oil | Isaac Environmental Engineering Co., Ltd. | http://www.isaaceng.co.kr | 1.Outline CRS (Coolant Recycling System) is developed to recycle cutting oil wasted upon treatment of chips. 2. Introduction (See fig 1) |
Equipment |
| 390 | Cutting oil sterilization system | Cutting oil sterilization system | Isaac Environmental Engineering Co., Ltd. | http://www.isaaceng.co.kr | 1.Outline The product is a system that generates heavy oxygen by using clod plasma discharge at low radio frequency of low voltage. completely sterilizes the bacteria in the cutting oil by strong oxidization and deodorization of the heavy oxygen. oxidizes and decomposes the foul smell generating materials for deodorization. 2. Introduction (See table 1. Fig 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000220-2.jpg></center> <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000220-3.jpg></center> 3. Characteristics 1) Reduction of treatment for wastes generated upon throwing cutting oil 2) Reduction of purchasing cost for cutting oil according to recycling 3) Improvement of working efficiency and productivity according to the prevention of odorant gas 4) Improvement of system operating ratio by reduction of operating stop time according to recycling 5) Prevention of occupational diseases caused due to bacteria and virus 6) Improvement of operation environment by generation of negative ions 4. Application Sterilization and treatment of waste cutting oil in the process and equipment using cutting oil | Equipment |
| 391 | CYBAG FILTER | CYBAG FILTER | J-E TECH Co., Ltd. | http://www.j-etech.co.kr/ | 1. Outline - This CYBAG FILTER is a high-efficient filter which integrates a filter bag collector and a front-side centrifugal dust collector in order to relive a financial burden of installation expenses and maintenance expenses. and address the problem of taking up too much an installation space. 2. Introduction 3. Characteristics - Integrated system through the combination of a upper filter bag collector and a lower centrifugal collector - Reduction of investment costs for initial installation - Reduction of maintenance expenses - Suitably used in a limited installation space - Reduction of dust loading of a filter bag - Extension of a removal interval - Convenient management due to a simple structure 4. Application - Business enterprise that installs new dust collection devices - Business enterprise that renovates and replaces decrepit dust collection devices - Business enterprise that has a small installation place of dust collection devices - Industry businesses that emit dusts which require a high degree of difficulty in dust collection and removal - Business enterprise that responds to the Total Air Pollution Load Management System |
Equipment |
| 392 | Cyclone | Cyclone | Entec Co., Ltd. | http://www.en-tec.co.kr/ | 1. Outline - This equipment sinks and collects the dust by separating the dust from gas by centrifugal force through giving the turning movement to the coarse and heavy particles. - It shows the excellent efficiency for the dust of large particle and it is used as the pre-treatment equipment of dust collector for the small particle. 2. Introduction 3. Feature - Available of dry collection and cheap operation cost - Available of operation in the high temperature - Cheap maintenance cost due to the simple structure - Available of treating the gas of high temperature and low pressure loss (within 2 - 6 inch of water layer) - Optimal for the treatment of coarse and large particles and easy control for maintenance 4. Application - Pre-treatment dust collecting facility of filtration dust collecting facility - Dust collecting facility of boiler - Crashing and separating facility - Sawmill facility |
Equipment |
| 393 | Cyclone | Cyclone | Dustking Co., Ltd. | http://www.dustking.com | 1. Outline - The device removes dusts by applying centrifugal force to exhaust gas. This dust- removing device is mainly used to collect the dust with a microscopic range of size of 10 um or bigger. 2. Introduction 3. Character - Gas flows into the inlet of a cyclone along the tangential direction and flows down in circle along the inner wall with the velocity of 14~21m/sec. This circular movement creates a centrifugal force. This circular movement around the outlet separates coarse particles. losing the centrifugal force. to the hopper at the lower part. and discharges gas to the outlet. - Excellent Performance compared to costs of investment and maintenance. - High dust collecting efficiency (90% for particles of 10 μm or larger). - Variable performance according to size and density of dust. inflow velocity. and choices of fan. 4. Application - Boiler gas drift - Scattered dust at chemical plants - Milling pants - Fertilizer plants - Pharmaceutical companies - Cement plants |
Equipment |
| 394 | Cyclone | HANSUNG DUSTKING Co., Ltd | http://www.dustking.com | 1. Outline • Single unit cyclone - It is a device to remove dust by applying centrifugal force to the exhaust gas. The dust removal device is mainly used to collect dust particle with a 10 ㎛ or bigger microscopic size range. - Gas flows into the inlet of the cyclone in a tangential direction and flows down along the cylindrical inner wall at a velocity of 14 21 m/sec. Centrifugal force is created by this rotating movement. Coarse particles lose the centrifugal force while the gas rotates along the outlet. Gas is reversed at the conical part and then discharged to the outlet. Particles are separated and sent to the lower hopper. A double cone or a small blow-down cyclone is installed to absorb 5–10% of the treated gas in a dust box to prevent the rescattering of the collected particles. thus improving the efficiency. 2. Introduction 14Biz-144.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-144.JPG'>3. Characteristic • Excellent investment and maintenance costs • High dust collecting efficiency for dusts that are 10 ㎛ or larger in particle diameter • Performance depends on the size of dust particle. dust concentration. flow velocity. and the selection of fan 4. Application • Boiler gas dust. scattering dust of chemical plants. fertilizer plants. pharmaceutical companies. timberwork. foundry. cement factory. etc. |
Equipment | |
| 395 | Cyclone | Hanil Plant Inc. | http://www.hanilplant.net | 1. Outline • In a cyclone. gas flows pass around a cylindrical container. and the dust particle contained in gas is separated from the gas on the inner cylinder wall by centrifugal force and flows down the wall. 2. Introduction 14Biz-416_Cyclone.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-416_Cyclone.JPG'>3. Characteristics • Small installation area • Continuous operation • Low pressure loss • Easy dust collection for big particles • Unaffected by the incoming temperature 4. Applications • Preprocessing of prevention facilities • Lumber. cement. fertilizer. and paper dust • Food and pharmaceutical dust |
Equipment | |
| 396 | Cyclone and Bagfilter | CYBAGFILTER | CF Tech | http://www.cftch.co.kr | 1. Outline The facility is an integrated dust collector that has a bagfilter at the top portion ad a cyclone at the bottom. 2. Introduction 1) Performance of Cybagfilter We developed a cyclone shape of high efficiency by computational analysis using CFD(Computational Fluid Dynamic). Cybagfilter collects 70% of dusts with sub-micron (less than 1 mm) and 95% of dusts with more than 10 mm at the cyclone part. 2) De-dusting system of bagfilter in Cybagfilter - Air line pulse jet is used for de-dusting. - Our company developed various types of air line spray nozzles to improve the de-dusting function. which are most optimal for de-dusting systems. 3. Characteristics 1) The structure is simple and it is possible to install them in a limited space. 2) The dust load in filtration cloth is reduced. 3) It is possible to extend the de-dusting interval 4) We possess the design technology of Compact Hybrid Dust Collector 5) The operation. maintenance. and installation costs are reduced compared to the prior dust collectors. 6) The life time of filtration clothes are extended by more than twice 4. Application 1) Factories to install dust collectors 2) Factories to reorganize or substitute superannuated dust collectors 3) Factories with small installation areas for dust collectors 4) Industries with dusts difficult to collect or de-dust. 5) Factories with the measures for controlling the total volume of contaminants. | Equipment |
| 397 | Cyclone dust collector | Green Tech Co., Ltd. | http://www.green-tech.co.kr | 1. Outline - Cyclone This equipment cause spiral movement for relatively thick and heavy particles to remove these particles from gas through centrifugal force impacting the particles. to make them fall for collection. For dust with large particles. it can be used individually and show outstanding performance. and for dust with fine particles. the cyclone is used as pre-treatment device for high efficient dust collector. - Multi Cyclone The Multi Cyclone has more than 2 small cyclones installed in parallel. Mechanical cyclone dust collectors show excellent dust collecting efficiency if the size is smaller. and it can be effective if several small cyclones are installed in parallel to treat large volume of gas as it will not change pressure loss too much. Each cyclone has its way to use and it needs equal pressure distribution of cyclone per design and project. It is used to remove fly ash included in the flue gas of boilers. 2. Introduction 3. Characteristics - Available for dry collection and dust elimination. cheap operation cost - Able to operate at high temperature - Less maintenance fees by using simple structure - Available for treatment of high temperature gas and less pressure loss (within 2~6 inches of water layer) - Appropriate for coarse particle treatment. simple maintenance and operation - Economic in terms of price - Simple structure - Do not need additional maintenance - Ideal for pre-treatment of electrical dust collecting device or filtration device - Able to operate at high temperature - Excellent dust collection capacity for particles larger than 5㎛ in diameter - Low efficiency (in particular smaller than 5㎛ in fine particulate size) and expensive operation cost (Due to pressure loss. can absorb gas and collect dust at the same time) 4. Application - Pre-treatment dust collection facility of cyclone dust collector - Dust collection facility of boiler - Pulverization and selection facility - Lumber facility - Boiler dust - Rear equipment for incinerator |
Equipment | |
| 398 | Cylindrical Water Tank | Stainless Steel Cylindrical Water Tank | KumKang Co., Ltd. | http://www.ststank.com | 1. Outline - Stainless training wall water tanks are produced with the structure of proper LW ratios and C.T value. so they have a great effect in improvement of turbidity and foreign substances precipitation. Also. those tanks are structurally made to have no dead water. and because the water is discharged in order from water intake to the water exit. there is no occurrence of dead water so that that can always supply fresh water. 2. Introduction 3. Characteristics - Clarification Pillar: It has an effective function of emitting chlorine gases and settling foreign substances. so that it improves water quality and extends the life span of the water tank. - Training(or Guide) Wall: It suppresses the occurrence of dead water and functions as chlorine stirring. - Water Exit & Clean Out: Water exit is installed higher from the floor plate. so that it prevents the precipitates and the original water from being discharged together. Clean-out is installed lower than the floor plate so that the water can be discharged effectively from the water tank. 4. Application - Water Tank |
Equipment |
| 399 | Dabim Sewage Sludge Recycle System | Dabim Sewage Sludge Recycle System | Dabim Solution Co., Ltd. | http://www.dabim.co.kr/ | 1. Outline • Dabim Solutions’ sewage sludge treatment system uses microorganisms and fermentation technology. • By dealing with the problematic sticky property of water. this system can now solve problems caused by the glue zone. which is formed by sugar contained in water when the moisture ratio is 34–45%. 2. Introduction 14Biz-63.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-63.JPG'>3. Character • Solves glue zone problems by using microorganisms and fermentation technology • Solves evaporation restriction problems. which occur during dry treatment process. through pre-fermentation process and technology • Solves gas problems. which occur during dry treatment process through low-temperature fermentation process • Maximizes energy efficiency during the overall process • Minimizes soil degradation and malodor problems so that the water can be reused 4. Application • Sewage treatment • Wastewater treatment • Advanced wastewater treatment • Water treatment |
Equipment |
| 400 | Daewoo Thermal Remediation System | Daewoo Thermal Remediation System | Daewoo Construction Co., Ltd. | http://www.dwconst.co.kr | 1. Outline - This system is an improved technology of electric resistance thermal method to be applicable to the domestic environment. It is a soil remediation technology by using the industrial 380V 3-phase current directly to the soil. 2. Introduction 3. Characteristics - Environment recovery project for the new US military bases - Soil remediation areas. including land and housing development areas - Oil tank areas. including military base. service station and toxic material tank - Soil contaminated with high-density organic materials - Small area and large area disregarding of topography and agricultural products - Specifications Item Description Remarks Applicable Soil SVE area and silt are possible Shallow underwater is better Application Method In-situ Sequential treatment of large area Contaminated Material Diesel. gasoline and TCE Power supply method 3-phase 380V (100Kw) Transformer is not necessary Electrode Normal H steel Free arrangement and easy installation Life of electrode Over 1.5 years Power 0.21~0.35 kw/m3 (over T= 70℃) Effective radius 1.5m ~2m Removal Efficiency TPH: >95% BTEX: >95% 3 months Average recovery time 5 months (in consideration of additional bioventing) Saves more than 70% of time Treatment cost 32.000 won/dry ton For 20*20*3m 4. Application - Soil remediation technology |
Technology & Process |
반응형
'놀면서 일하기 > 창업 아이디어링 + 문서' 카테고리의 다른 글
| 환경산업 관련 제품 및 기술 목록 : 601-800 (0) | 2023.12.25 |
|---|---|
| 환경산업 관련 제품 및 기술 목록 : 401-600 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 1-200 (0) | 2023.12.25 |
| (주)숲담다. (0) | 2023.12.08 |
| 소상공인 창업 아이템. 2016 : 11. 육아맘이 가장 잘 할 수 있는 일 등 (1) | 2023.12.08 |
댓글