728x90
반응형
Kailiwei-삼안 헤드 7-50 3.5-200X Simul Focal 연속 줌 스테레오 현미경 WF10X/22mm 접안 렌즈, 휴대폰 PCB 납땜용
https://s.click.aliexpress.com/e/_DnqTh0v
114.04US $ 21% OFF|Kailiwei Stereo Trinocular Microscope | Mobile Repair Trinocular Microscope - Microscopes - Aliexpress
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
환경산업 관련 제품 및 기술 목록 : 601-800
| NO | 제품명 | 모델명 | 회사명 | 홈페이지 | 내용 | 카테고리 |
| 601 | Filter media | PS membrane using ceramic filter and diatomaceous earth pre-coat | Ecomaister Co., Ltd. | http://www.ecomaister.com | 1.Outline PS membrane (ceramic filter) completely filters up to particles of unit 0.3 mm by using diatomaceous earth pre-coating technique with ceramic filter that is made by sintering PS ball. The PS membrane system exhibits excellent suspended solids and turbidity removing capabilities in the pre-process of RO/UF and the post-process of various treatments like machinery. making steel. chemistry. and so on. It is also next generation filtering technique that can remove dissolved substances by the absorption force of the diatomaceous earth. The system can reduce the employment of auxiliary filters and suppress the amount of sludge generated when compared with existing pre-coat system. 2. Introduction (See fig 1. 2) |
Instrument & Chemicals |
| 602 | FILTER PRESS | FILTER PRESS | Sinwoo Co., Ltd. | http://www.sin-woo.com | 1. Outline - Sinwoo’s CFS Type Filter Press is a new kind of dehydrator manufactured by adopting a diaphragm pump and a hydraulic cylinder and is also a filter pressing dehydrator that can expect optimum dehydration efficiency by using the difference between maximum and minimum pressure without overloading the machine. This Press allows for full automatic filter pressing dehydration in which one cycle of dehydration is carried out fully automatically with one button switch. 2. Introduction 3. Characteristics - High-density treatment of sludge with the attachment of a diaphragm pump. - Increased dehydration efficiency using the difference between maximum and minimum pressure without overloading the machine through the operation of a powerful hydraulic cylinder. - Semi-permanent use as a filter thread is made of polypropylene (P.P) so that it is not corroded by acid and alkali and is also convenient and easy to use as the product is lightweight. - Compact compared to the same capacity of other products as a filter thread has a larger volume than its own area. - Convenient operation by anyone as the machine operation is simple. - Less installation area and simple separation of cake and filter cloth and exchange of filter cloth. |
Equipment |
| 603 | Filter Press | Filter Press | CLATEC., Inc | http://www.clatec.kr/ | Product Description We design and produce systems that filter and dehydrate sludge and other raw materials from ordinary and industrial sewage.We suggest systemic solutions that can help optimize the overall productivity by designing solutions for the specific types of sludge that customers deal with. The specifications of filtering systems that we design and produce are determined by the type. amount. and location of sludge to be processed. Product Feature Automatic operationMinimal cycle time with continuous cake discharge devicesImproved cake removal with filter plate vibrating devices or filter cloth vibrating devices(optional)Improved productivity with filter cloth automatic washing devices(optional) added function of a cake-drying daviceCake cleaning | Equipment |
| 604 | Filter without motive power for village water service | Filter without motive power for village water service | Junglim Natural Industry | http://www.ststank.co.kr | 1. Outline - The filtering layer is composed of five systems and the each layer removes the polluted water selectively. It is an advanced water treatment system. - It is available to secure the clean water for a long time and the maintenance is easy. - It is available to manage the subsidiary facilities economically by preventing the rust of facilities and pipes. - It satisfies with the environmental friendliness because it is available to control the amount of backwashing and treating efficiently by connecting with total management of village water service. 2. Introduction 3. Characteristics - It improves the efficiency of filtration and water purification by maximizing the efficiency of filler. It is easy to move and install due to the small size. - It reduces the operation cost due to long interval of filler replacement. - There is no blocking because the granularity is regular. - The efficiency removing red rust is excellent because of calcium film method by calcium ionized reaction. 4. Application - Village water service |
Equipment |
| 605 | Filtering equipment | Prima high speed filtering equipment | Prima Ateck Co., Ltd. | http://www.primaind.co.kr | 1.Outline Prima high speed filtering equipment includes a gravity type of granule filter. And. the equipment is currently recognized as one of best filterers. The characteristics of the equipment are as follows: First. it is easy to operate; second. it does not cause any blocking on the filter; third. it is simple to maintain and control; and finally. it is designed to reduce various costs and power consumption. 2. Introduction Prima high speed filtering equipment has a function of performing backwashing partly if necessary during filtering. thereby making it possible to operate continually without stop. The filtering layer is divided into several partitions having a width of 20 cm or 30 cm. The water flowing to the equipment flows on the filtering layer and is passed through filter media. Then. the treated water is finally discharged through a discharging outlet. In the present equipment. in this case. the water is kept to flow. The backwashing occurs in a hood provided on the lower portion of a traveling carriage. The backwashing is carried out for each of the partitions in the filtering layer. while the hood slowly moves over the filtering layer together with the traveling carriage. At this time. the rest of filtering partitions keep filtering. A backwashing pump pumps the clean water gathering from the hood so that it is discharged through a backwashing passage. In the present equipment. it is possible to automatically sense the filtering rate and carry out the backwashing on time set if necessary. <center><img src=http://www.apec-vc.or.kr/attfile/market_place/img/MP200300000226.jpg></center> 3. Characteristics 1) Carrying out continual filtering function upon backwashing 2) No need for installation of a backwashing or cleaning tank 3) Continuous auto backwashing with treated water (1~2 %) 4) Low pressure loss by a filter of 150 mm H2O or less 5) High performance and easy maintenance 6) Minimization of return quantity upon mathematical overload of SS 7) Economical advantages and reduction of installation cost 8) Easy maintenance with no pipe or air injector 4. Application 1) Treatment of water of life: removal of turbidity. colors. tastes. smells. metals and inorganic substances 2) Treatment of sewage of life: removal of SS. BOD. COD. and TOC 3) Treatment of water for industrial use and wastewater: removal of turbidity. chemical sediments. toxic chemical materials | Equipment |
| 606 | Filtering system | Multi-layer filter | Susang Development Co., Ltd. | http://www.susang.co.kr | 1.Outline Multi-layer filter is used to remove foreign materials. colors and tastes contained in make-up water. underground water and circulating water. 2. Introduction Filtering materials are filled in a closed type of cylindrical instrument. and the water in swimming pool is passed via the filters. such that undesirably tastes. smells and colors are filtered. The filter contains sand. anthracite and activated carbon layers that are sequentially laminated from the bottom portion. and thus. the water is passed through each layer. removing its impurities. tastes. smells and colors.(See table 1. Attach-1) 3. Characteristics An interior of tank is applied with specific ozone proof paint. 250u and the filtering material is the filter for the purpose of specific ozone. Especially. the water quality filtered from the multi-layer filter is 0.1 micron or less. which ensures a substantially clean quality of water. 4. Application Filtering and recycling of underground water. make-up water and circulating water | Equipment |
| 607 | Superfil Filtration System | Superfil Filtration System | Hanyang engineering Corp. | Http://www.hyfilter.com | 1. Outline Superfil system filtrates particles contained in big sized oil. The good ability to maintain the cleanness at a low cost helps to improve the products quality and to prolong the lifetime of machinery. 2. Introduction 1) Precoat: Mixing the raw oil and Diatomaceous earth 2) Filtration: Precoating the Diatomaceous earth on the filter tube and then starting filtration 3) Sludge receiver: After filtration. Sludge receiver is go in the BLOW-DOWN process. The entire sludge will be deliquefied. 3. Characteristics Diatomaceous earth inputted at first is regenerated and is reused several times. The Diatomaceous earth and the dirty particle are dehydrated and then only cake is taken away from the filter tubes. This system is environmentally friendly. 4. Application - Grinding oil. lubricating oil. hydraulic fluid. processing oil. water-soluble oil | Equipment |
| 608 | Pre-coat Filter | Dolphin filter (Pre-coat filter) | P & C Environment Technology Co., Ltd. | http://www.pncinfo.com | 1. Outline In order to filter out the fine particles that pass through the filter element. filtering aids (celite. silica. and activated carbon) are used to form thin layer of pre-coat on the surface of the filter element. This layer is called pre-coating which consists of porous filtering aids having an irregular shape and very fine pore. These pores have excellence in liquid distribution and in removal of impurities of colloid and emulsion state. which is very economical. 2. Introduction The basic construction of the device consists of the filter chamber. pre-coat tank. recovery filter. etc. Filter chamber internally consists of a coil spring which does the filtering process. and has the filter element arranged vertically. which is made of P.P. and P.E. that covers the coil spring from the outside. Filter chamber is an internal-pressure tank that filters liquid by forming a pre-coat layer with filtering aids attached on filter element. Pre-coat tank is used to preparing the pre-coat slurry during the first cycle of the procedure. and consists of hopper and feeder that inject filtering aids in the upper part. Recovery filter works as an assistant that dehydrates filtering aids containing the back-washed liquid and impurities. which also cakes. and discharges it. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000009_2.JPG><br>Fig. 1. Drawing.</br></center> <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000009_3.JPG><br>Fig 2. Process.</br></center> 3. Characteristics - Filtering level is fixedly maintained. - Super-precise filtering within 0.5㎛ is possible due to the use of filter aids. - The loss of raw material is minimized. - New type of dewatering process with 95% dewatering rate. - Completely automated designing is possible. - Rarely breaks down. easy to manipulate. and greatly reduces manpower. - Low in price to run the device. - Filter need not to be changed. saves labor costs since it runs automatically. and is low in price because of the compact size compared to its processing ability. 4. Application - For water pureness company - For pool. aquarium - For increase quality of flash. filtering wastewater for recycle - For cooling or recycling water. agricultural or industrial water - For advanced treatment | Instrument & Chemicals |
| 609 | Pre-coat filter | Pre-coat filter | P&C Environmental Technology Co. Ltd. | http://www.pncinfo.com | 1. Outline In order to filter out the minute particle which survived the filter element. celite. silica. and activated carbon are used to form thin layer of pre-coat on the surface of the filter element. This layer is called pre-coating. an irregular shaped. porous particle forming minute openings. These openings have excellence in liquid distribution and in removal of impurities of colloid and emulsion state. and is very economical. 2. Introduction 2-1. Construction The basic construction of the device consists of the filter chamber. pre-coat tank. recovery filter. etc. Filter chamber internally consists of a coil spring which does the filtering process. and has the filter element arranged vertically. which is made up of P.P. and P.E. that covers the coil spring from the outside. Filter element is an internal-pressure tank that filters liquid by forming a pre-coat layer with clarifier attached on its surface. Pre-coat tank is used to form the pre-coat layer during the first cycle of the procedure. and consists of hopper and feeder that injects clarifier in the upper part. Recovery filter works as an assistant that dehydrates clarifier contained inside the back-washed liquid and impurities. which also cakes. and discharges it. 2-2. Process <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000080_1.jpg></center> 2-2-1. Pre-coating Cycle Inject regular amount of clarifier contained inside the hopper into the pre-coat tank. and mix it with a cleaning solution. Pump and circulate this slurry in the filter chamber. During this procedure. clarifier sticks to the Filter Element due to the pumping pressure and forms the Pre-Coat layer. This procedure is called Pre-Coating Cycle. and it takes only 5~10 minutes before it passes on to the next cycle. 2-2-2. Filtering Cycle When Pre-Coating process is completed. a valve in the Pre-Coat tank closes. while a valve associated with Dirty solution opens. starting the filtering process. This solution is sent to Clean Tank from the Pump through Pre-Coat layer. and minute impurities(SS) within 0.5㎛ are completely piled up during this procedure. 2-2-3. Filter Back Washing Cycle Open up the valve at the bottom part of the Filter Chamber. and counterflow the Slurry solution inside the Chamber. forcing down the clarifier mixed with impurities to Recovery Filter Tank as well. by sending compressed air from the upper part of the chamber. When Filter Chamber is emptied and Filter Element is cleaned. the procedure returns to the Pre-Coating Cycle to have it done again. This back washing cycle allows filtering and dehydrating to take place at the same time. which is the distinguishing feature of this filter. 2-2-4. Dehydration Cycle The Slurry solution collected in the Recovery Filter Tank is dewatered by pressured air in the Recovery Filter. The liquid is collected at the Dirty Tank. and impurities and clarifier are caked to be discharged at externally placed Bin through the Belt. 3. Characteristics - Filtering level is fixedly maintained. - Super-precise filtering within 0.5㎛ is possible due to the use of clarifier. - The original sum loss is minimized. - New type of dewatering process with 95% dewatering rate. - Filter need not to be changed. saves labor costs since it runs automatically. and is low in price because of the compact size compared to its processing ability. 4. Application - Recycling of waste-water from bathrooms(cold and hot water). bedcloses and wet towel laundries - Recycling of circulation solution for polishing - Recycling of washing circulation solution of PCB plate for electronic components - Recycling of powdered-toner containing washing water as cooling water after filtering - Recycling of fat-removing circulation solution for preliminary process of gilding - Recycling of circulation solution for radiator FLOX(for automobiles and ACs) | Instrument & Chemicals |
| 610 | Oil and Air Filter | Automobile Oil and Air Filter Manufacturing Plant | APEC CORPORATION., LTD. | http://www.apecmachine.com | 1. Outline As one of leading automotive parts manufacturer. the Company is the frontier in Korea equipped with QS-9000 and ISO-9001 certifications. exporting oil/air filters as well as its manufacturing facilities all over the world. Every minute all staffs in the Company are trying to upgrade the products. and offer the best service to the clients based on the latest techniques and know-how accumulated. The Company desires to become one of the world’s most powerful companies in the early 21st century and will challenge continuously toward development of the filter in the 21st century. The Company is very pleased to have inquiries for setting-up of any specific automotive Oil/Air Filter Production Plant. 2. Introduction 2-1. Process Flow Diagram <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000095_1.jpg></center> 2-2. Technology Transfer with Training Program The Company will provide Owner with latest technology and operational know-how for the effective management of the Plant in addition to the training of Owner’s engineers and skilled workers at Plant site as well as in Korea if required. 3. Characteristics 3-1. Oil Filter Production Line - Media Pleat and Clipping A Media is pleated by knife type or rotary type pleating machine to be chosen according to the pleated shape and design. It needs a pre-heating system so as to keep its shape after media is pleated. In addition. parallel cutter is required to cut the media up to the element length. and its edgy point is jointed by steel clipping machine. - Elements Assembly The Elements are main filtering parts. which are assembled with pleated paper inside steel tube. Both side steel plates and one-bottom parts are assembled with relief valve to make a by-pass oil line when the media filtering has a problem. The media and end cap steel plate are jointed by PVC sol adhesive having a curing time of ten minutes at 175℃. - Seaming Assembly and Test Other kinds of assembly parts are made by the power press with a progressive type die. and also. housing parts are the product made by a hydraulic press machine system together with deep drawing special mold and it is flowing to painting process. which are final assembly part together with main element. In this manufacturing process. all goods are automatically checked by air leak test system. and inferior products are sorted out from the assembly line. An individual box packing machine is to be provided according to the clients requirements. 3-2. Air Filter Production Line - Media Pleat There are two kinds of pleating methods. one for a normal knife type pleating and the other for a hot melt-bonding system type pleating to be selected according to the air filter shape and design. In general. a hot melt-bonding type pleating method is used in manufacturing of a square type filter. Meanwhile. an automatic media cutting system is to be supplied according to the clients requirements . - PU Injection The conditions of final goods will be soft or hard depending on the specification of a Polyurethane and the ratio of mixture of it and ISO as an additive. In some case. a center tube may be required to keep a filter certain shape even rear process is identical to that of non-center tube filter. - Dry and Assembly Packing A PU chemical is very sensitive to the changing of temperature and requires an action time from liquid to solid. So. a dry system is necessary to keep a specific temperature condition. Besides. there may be more processes required for the insertion of a rubber gasket or O-ring. and ink-jet printing on the surface of a filter or labeling (sticker) system in the final packing process. The final products after individual inspections are to be packed by a packing machine. 4. Application - Air treatment plant | Equipment |
| 611 | Biological Filtration Process | BIOFIL? process | Gilqwang GreenTech Co., Ltd | http://www.gilgwang.com | 1. Outline BIOFIL? process is a submerged. upflow biological aerated filter system with granular media to remove BOD. SS. nitrogen and phosphorus. This technology serves two purposes. biological degradation and filtration of pollutants by biomass attached to the support media through the 3-4m bed 2. Introduction 2-1. Process Flow Diagram and Description - Backwash Operation . Homogenous distribution of air by nozzle system . Optimization of backwash water and air quantity . Backwash water quantity reduction by low water level backwash technology . Reducing of power cost by backwash water quantity control . Easy operation and management by full automation system - Biofiltration-Media . The place of biofilm growth and filtration . Production coat-down by using low cost material . Media size : 2-8mm . Maximization of Biofiltration-Media function - Module Application of Bed Support System . lose construction and easy installation are possible by module application - Diffuser System (Patent) . Tomogenous air distribution . Acetal/EPDM rubber membrane – fine bubble . Prevention of clogging by improvement of diffuser system structure . Improvement of air transfer rate - Nozzle System (Patent) . Wastewater. backwash water and air supply . Prevention of clogging. optimization of slot size. air hole . Stainless steel. acetal <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000098_1.jpg></center> 3. Characteristics 3-1. Advantage of Technology Upflow Biological Filtration Process This process is a submerged. upflow biological aerated filter system with granular media. diffuser system and nozzle system. 3-2. Compact and high-rate treatment process This process is a compact. high-rate treatment process by biological degradation and filtration. So. BOS. SS. nitrogen and phosphorus removal is possible simultaneously. Especially. in domestic wastewater treatment. organic and nitrogen removal is possible within 3hrs EBCT. 3-3. Full Automation Process Backwash process is controlled automatically by PLC(Programmable Logic Controller). so easy operation and management are possible <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000098_2.jpg></center> 4. Application This process can be applied to as secondary treatment organics removal. nitrogen and phosphorus removal simultaneous or individual. As tertiary treatment. wastewater reuse is possible. | Equipment |
| 612 | Filtration System | AquaDisk | Grenex Co., Ltd. | http://www.igrenex.com | 1. Outline The AquaDiskTM filter is based on Swiss-engineered technology which has been used successfully since 1978. The AquaDisk utilizes a cloth membrane as the filter media. Density and thickness of the media is selected to correspond to the characteristics of the wastewater. This filter is designed for tertiary treatment following activated sludge and SBR systems. It has also been used following lagoon systems for TSS removal. The AquaDisk can be used as a pre-filter for primary solids when a coarser cloth is utilized. By adding polymer to process wastewaters. the AquaDisk is effective in removing phosphorus and dye particles. 2. Introduction 2-1. Operation <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000118_1.jpg></center> A) Inlet Wastewater enters the tank or basin. By gravity. liquid passes through the cloth membrane. Solids collect on the outer surface of the media. forming a mat. The filtered liquid then enters the internal portion of the disk where it is directed to final discharge. B) During backwash. disks are cleaned in multiples of two. unless a single disk unit is utilized. Disks rotate slowly. allowing each segment to be cleaned. Backwash water is directed to the headworks. Filteration is not interrupted during this cycle. C) The AquaDisk filteration process requires no moving parts during normal filtration and influent wastewater remains in a quiescent environment. Some heavier solids may settle to the bottom portion of the filter tank. These solids are then pumped on an intermittent basis back to the headworks. digester or other solids collection area of the treatment plant. D) An automatic. intensive cleaning process can be initiated as needed to thoroughly clean and prevent biogrowth on the cloth media. This cleaning process. without the use of chlorination. is achieved by a high-pressure spray which is an integral feature of the AquaDisk. Both the intensive cleaning process and the automatic backwash process are controlled by a simple PLC. 3. Characteristics - Higher quality effluents - Lower backwash rates - Reuse quality effluent without chemical addition - Capable of high solids loading and higher hydraulic loading rates - Available in package and concrete units - Small footprint - Eliminates sand media and underdrains 4. Application - Tertiary treatment - Reuse/recycle - Industrial process streams - Phosphorus removal - Color removal - Lagoon effluent - Precipitate | Equipment |
| 613 | Filtration collector equipment | Bag Filter | Ecovic Co., Ltd. | http://www.ecovic.co.kr | 1. Outline - Equipment that collects dust into a tamis by passing emission gas including dust into several tamis that are installed side by side - Tamis itself collects a small amount of dust. but the more important role of it is acting as a supporting form system for the dust layer that quickly accumulates above the cloth. Therefore fine dust and high-concentration dust is even more effectively collected by the dust layer and collected dust is released by mechanical devices 2. Introduction 3. Characteristics - High collecting efficiency on particles and collects several forms of dust - Capable of using in high-concentration raw air and can process various capacity - Capable of using preprocessed granular tamis or fiber for high-efficiency collection of dust or gas pollutants under 1㎛ - Occurrence of crusty caking or plugging of tamis or specific facilities is needed for humid material. concentration of humidity and absorption components - Shortening in life when processing high-temperature. acid alkaline dust. gas - Danger of fire or explosion when collection of dust with easy-oxidation properties - Range of processed gas amount is above 3㎥/min and collection efficiency is over a maximum of 99% 4. Application - Metal. grinding plants - Cement plants - Food plants - Ceramics. rubber. pharmaceutical manufacturing plants - Fiber. chemical plants - Grain and feed plants - Wood manufacturing plants - Iron. steel. and casting plants - Incinerator latter equipment - Dust removal of other industry workplaces |
Technology & Process |
| 614 | Filtration Membrane | NADIR? Separation Membrane | Jeong Woo Environmental Technology Inc. | www.koreambr.co.kr | 1. Outline NADIR? Separation Membrane which features unique characteristics including permanent hydrophilic properties and high chemical resistance is produced with a manufacturing method which is especially developed and patented. Compared with other membranes. NADIR? Separation Membrane showing good hydrophilic properties improves the capacity (permeate flow rate) and a life of a separation membrane and decreases the tendency that a separation membrane is contaminated. NADIR? Separation Membrane has a line of products that feature several kinds of separation membrane pores. which ranges from microfiltration. ultra filtration and Nano filters. 2. Feature - High water flux - Precise graduation capacity - Partial reverse cleaning - High thermal and chemical resistance 3. Introduction 4. Application - Separation Membrane |
Equipment |
| 615 | Fine Fiber Filter | Yucheon Enviro Co., Ltd. | http://www.yucheon.co.kr/ | 1. Introduction 2. Characteristics - Can save energy by 1/20~1/30 compared to conventional centrifugal concentration - Filter bag is always maintained in optimum state by cleaning device. so the operation performance and efficiency is stable. - Little vibration and noise during operation - Unattended operation is available as of full automatic type - The concentration of low concentrated sludge. such as active sludge. is available - Outdoor installation is standard specification. so separate facility is not necessary. - Can control the concentration level. and the SS concentration in the filtrate is very low - It is low pressure filtering concentration method by siphon principle. and there is no clogging problem as low sludge adhesive filter bag is used. - It is very easy for maintenance and management of filters as of open type simple structure. 4. Application - Freezing thawing dehydration It had been the freezing type after centrifugal concentration conventionally. but power consumption has been saved by more than 40% by adopting filtering concentration. - Pressure compressed dehydration It is operated as a concentration system to raise the concentration level of the sludge supplied to the pressure compressed dehydrator. It has solved the treating amount shortage of dehydrator by increasing the sludge concentration by 3 - 4 times. - Separation and concentration of excessive active sludge It filters and concentrates the excessive sludge. which cannot be deposited well. and supply to dehydrator. Stable concentration is available by inflowing raw sludge of 1st sedimentation basin into the gravity deposition concentration tank. - Concentration improvement of digester Heating energy is reduced as inflow sludge amount is decreased. and direct dehydration is available without separation of detached filtrate as the concentration of digested sludge is high enough. |
Equipment | |
| 616 | First Flush Exclusion Screen | Nuri Environment | http://www.nurienv.com | 1. Outline • It is a screen used in facilities to collect and use rainwater from the roof or rooftop. • It excludes the first flush of rainwater for a certain amount of time because it contains fallen leavens. dust. etc.. and allows it to be cleaned and stored in the underground tank. • It can exclude the first flush of rainwater and remove possible incoming solids. 2. Introduction 14Biz-125.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-125.JPG'>3. Character • In case of using the underground tank - Rainwater should be stored below the contact point d and up to the contact point A. - A motor-operated valve will shut off when rainwater reaches to the contact point A. - Portable water can be replaced for rainwater to fill the tank from C to D on the dry day and used as grey water. - A protective pump emergency bell rings when it reaches to the contact point D. The use of reclaimed water pump should be stopped. • Individual power unit and controller 4. Application • Rainwater recycling |
Equipment | |
| 617 | First-Flush Rainwater Treatment Device (UNFS) | First-Flush Rainwater Treatment Device (UNFS) | World Innotech Co., Ltd. | http://www.world-inno.com/ | 1. Outline • First Flush Rainwater Treatment Device (UNFS) is designed based on the special characteristics of first-flush rainwater so that the device can treat it selectively. • When first-flush rainwater flows into the device. nonpoint pollutant sources are treated both in a physical and chemical manner by passing an impurity treatment tank. a sediment storage tank. and a filter. 2. Introduction 14Biz-68.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-68.JPG'>3. Character • Low installation costs • High treatment efficiency • Easy maintenance • Efficient flow control during the rainy season 4. Application • Water treatment • Wastewater treatment • First-flush rainwater treatment • Physical treatment of nonpoint pollutant sources |
Equipment |
| 618 | Fish spawning ground | Fish spawning ground | Assum Co., Ltd. | http://www.assum.co.kr | 1. Outline Based on the concept of preservation and restoration of ecosystem. this fish spawning ground is a system added to the artificial plant islands in a singly or complex way by providing habitats for fish and others. part of a waterfront ecosystem with a view to protecting fish resources 2. Introduction 3. Characteristics - Considered the ecology traits (straightness. concealment and contact) of fish. - Contribute to boosting fishermen’ income by inducing the spawning and inhabitation of specific fish such as crucian carp. carp. mandarin fish and Korean bullhead. - From the perspective of tourism. it is expected to attract more visitors like fishing. 4. Application - Preservation of ecosystem |
Technology & Process |
| 619 | Five folds water tank without welding | Five folds water tank without welding | Junglim Natural Industry | http://www.ststank.co.kr | 1. Outline - It adapts the method to push up the five folds plate by spiral type using mechanical equipment. - The beginners can construct it because there is not welding part. The perfect water discharging is available. 2. Introduction 3. Characteristics - The pollutant is hard to attach at the surface because the surface is smooth. It prevents the propagation of microorganisms such as sphagna and bacteria. - It is strong to the shock from the outside and fire. It has strong chemical qualities such as corrosion-proof. weatherability. and durability by these materials. - It is not necessary to maintain it by the good corrosion-proof material and life is semi-permanent. It is economical because the washing is easy and the maintenance cost is cheap. 4. Application - Water tank |
Equipment |
| 620 | Fixed Film Bioreactor | Fixed Film Bioreactor | Dure Technology Co., Ltd. | http://www.dure.com | 1.Outline The process is an advanced biological treatment for high load of organic. refractory wastewater. 2. Introduction A Fixed Film Bioreactor has two or more closed type of reacting chambers that are filled with media and supplied oxygen from an air diffuser at the lower portions. Beside the reacting chambers there is provided a settling chamber into which the settled sludge is sent to a returning pump and flows to the reacting chambers. with appropriate heating according to auto temperature adjustment by means of heat exchanger. At that time. the sludge is kept at an optimal condition where microorganisms increase and move. such that the oxidization and digestion of substrate are active. To adjust the ratio of C:N:P of the substrate of raw water or when other elements are supplied. they are mixed well in a chamber before the reacting chambers. Since the microorganisms are fixed to the media. they are kept at the concentration of several tens of times as high as existing activated sludge processes. which gives some advantages that the organic materials are perfectly removed. the changes of treatment water temperature or the wastewater load don’t matter. and the expansion and rising of sludge that are acted as defects of the activated sludge processes does not occur. Aerobic and anaerobic digestion are simultaneously generated on the outside and inside of the biofilm fixed to the media. such that an amount of sludge generated is substantially small. Multi-step treating process with the reacting chambers and the settling chamber gives some advantages that strong resistance against external shocks. Thus. it is adequate to treat high concentration of organic. refractory wastewater. The present fixed film bioreactor is filled with media made of synthetic resin designed specifically and exhibits a high treating efficiency for various substrates for a long period of time. The microorganisms that are cultivated in the reacting chambers are earth organisms with pseudomonas as dominant species that are capable of digesting high concentration of organic. refractory substrates at a high degree of efficiency. As a result. the present bioreactor has excellent efficiencies in the fields of the treatment of industrial wastewater and livestock wastewater. the advanced treatment of sewage and polluted water. and the wastewater reclaiming and reusing equipment. 3. Characteristics 1) Treatment of high concentration of wastewater 2) Effect of high load of aerobic-anaerobic digestion 3) Stable to the fluctuation of load 4) Generation of small amount of surplus sludge 5) Formation of bio-filter of the concentration of several times of sludge as high as existing activated sludge process 6) No expansion and rising of sludge 4. Application Treatment of livestock wastewater. treatment of refractory. organic wastewater. advanced treatment of sewage and polluted water. and the wastewater reclaiming and reusing equipment | Equipment |
| 621 | Fixing Quantity Input Electromagnetic Flow Meter (7500) | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline - This electromagnetic flow meter is a device applying Faradays law of electromagnetic induction which is a principle of measuring electromotive force generated when a fluid flows in a magnetic field. This flow meter can measure a variety of fluids ranging from general top water. food and beverage. waste water to sludge regardless of temperature. density and pressure of liquids with minimum conductivity of more than 0.5㎲/cm. 2. Introduction 3. Characteristics - The product (Model No.: 7500). the output of the converter of which is a unit pulse is used as a flow meter for deployment control. -Applicable to flange-typed connection as well as clamping for food hygiene. - Applicable to measurement of various fluids ranging from dirty and wastewater to flood fluids and water. 4. Application - Fixing Quantity Input Electromagnetic Flow Meter (7500) |
Equipment | |
| 622 | In-Line Flame Arrester | WF21, WF23 | Corporation WIN | http://www.corpwin.com | 1. Outline Both Model WF21. WF23 are bi-directional type and is designed to be installed In open vent pipes from storage or processing tanks. bleed lines or other vapor conveying lines. The flame arrester is designed with a spiral wound and crimped bank element. The tie rod bolts in order to have a simple maintenance are removed. and the remaining jackscrews expanded. 2. Introduction Model WF21. WF23 arresters are used to prevent propagation of an external flame source through the vent opening and into the tank. Each size is approved for installation at distances up to 20 times length of arrester N.D from the open end of the pipe. 3. Characteristics - Model WF21. WF23 . Bi-directional type . Size : 1 through 60 . Proven spiral wound. crimped ribbon. flame element . Available in aluminum. carbon steel. stainless steel and other materials. 4. Application Model WF21. WF23 arresters are used to prevent propagation of an external flame source through the vent opening and into the tank. | Instrument & Chemicals |
| 623 | Flame proof-type Sampling VOC Gas Detector | Gastron Co., Ltd. | http://www.gastron.com | 1. Outline • This is a gas detector with an explosion-proof construction installed in areas with a gas leak to detect VOC gas continuously. • It detects VOC gas with low concentration by using the PID sensor. 2. Introduction 14Biz-443_Flame_proof-type_Sampling_VOC_Gas.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-443_Flame_proof-type_Sampling_VOC_Gas.jpg'>3. Characteristics • Built-in self-diagnosis function with a microprocessor • Detects a gas leak quickly using a built-in high-performance pump • Applies stable quality and sensing principle with proven service life • Improves maintenance by using a cartridge-type sensor 4. Application • VOC gas detection |
Equipment | |
| 624 | Flange-typed (Type II) Electromagnetic Flow Meter | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline This electromagnetic flow meter is a device applying Faradays law of electromagnetic induction which is a principle of measuring electromotive force generated when a fluid flows in a magnetic field. This flow meter can measure a variety of fluids ranging from general top water. food and beverage. waste water to sludge regardless of temperature. density and pressure of liquids with minimum conductivity of more than 0.5㎲/cm. 2. Introduction 3. Characteristics - The Flange-typed (Type II) Electromagnetic Flow Meter is applicable to the pipes with a size ranging from minimum 6mm to 1400mm. - Manufacturable in various sizes (ANSI. DIN. and JIS). - This product features a wide measurement range from 0.03m/sec to 10m/sec. which has a use range of approximately 330:1. - Especially. the product’s degree of precision is very high as it amounts to 0.25% of an instantaneous value. 4. Application Flange-typed (Type II) Electromagnetic Flow Meter |
Equipment | |
| 625 | Flat Form Scale Feeder | KDA-VS/28 | Dukyoung Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Outline This device has integrated Flatform scale and twin screw feeder which used weighing controller to control screw feeder rpm to measure and feed-in the right amount. 2. Introduction 3. Characteristics - Less noise - Available for portable use as it is small in volume. and easy for maintenance - Available for simple disassembly and easy CIP 4. Application Material for various elements such as snack material. and pellet |
Equipment |
| 626 | Flat Plate Water Heater | GSOL-PA300 | Grand Solar Co. Ltd. | http://grandsolar.co.kr | 1. Outline -It consists of hot water storage tank. flat plate solar collector. product installation stand. and basic pipe accessories. 2. Introduction 3. Characteristics -Enhanced heat preservation performance by selecting direct spray and foam of high density urethane protector -Reduction of installation time and simple installing process due to the minimization of accessories -According to consumer preference. horizontal and vertical installations of storage tank are both available -Automatic temperature control using separate apparatus for auxiliary heat source 4. Application - Areas using low temperature including solar heating and water heating system |
Equipment |
| 627 | Flex Stone | KC Rivertech Co., Ltd.. | http://rivertech.co.kr | 1. Outline • It is a product that fixes natural stones on a geotextile sheet of polyester fiber. Stabilization of river bank protection. reduction of flow velocity. and river ecosystem protection are possible. It has outstanding scenery because greening between stones is available. As an eco-friendly method. it considers the structural diversity of natural rivers. 2. Introduction 14Biz-138.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-138.JPG'>3. Characteristic • It has excellent durability and strength due to fixation of natural stone by metal anchor • Stone fixation in a site. use of stone found in a site. and processing depending on the geographical condition are available. • Polyester-based sheets have higher durability than metal-based materials. • The construction time is shortened because of its easy construction. • It can be fixed and installed regardless of the boulder or riprap. 4. Application Ecological restoration and creation of ecological river |
Technology & Process | |
| 628 | FLEXBLE SCALE | FLEXBLE SCALE | ArisuTec Co., Ltd | http://arisutec.com | 1. Outline - The engineering device represents the environment-friendly method that completely resolved existing issues with respect to regeneration engineering method. - The device is designed to help dilapidated water pipe to serve as conduit by removing rust. scale and slush with the use of mechanical parts of wire and head instead of detrimental chemicals. -The method obviates the need to damage pipes in the space of projects and may prevent corrosion that might arise from water pipes. extend lifespan and save energy. 2. Introduction 3. Character - Polishing engineering method: Involving Flexble Wire - Polishing capacity : Removal of more than 99% - Damage to pipes : No issue - Main polishing materials: Cemented carbide. brush. - Able to operate even in the face of objects that get in the way. 4. Application - Rehabilitation of dilapidated water pipes |
Eco-Friendly Products |
| 629 | Flexible Coupling | Gear Coupling | Nara Corporation | http://www.naracorp.com | 1. Outline - This product is assembled in a way that an idle gear sleeve and a rotor gear with crowning are interlocked each other. These gears are designed as an involute gear teeth shape and have a special form so that power transfer is made smoothly with an equivalent number of revolutions if there is a slight slant between a sleeve and a hub 2. Feature - This product is small-sized and lightweight compared to delivered horsepower and so it can be used in high speed rotation. - As this product absorbs a partial disposition. an angle of deviation and axis movement errors. it delivers powerful power while protecting the machine parts. - Custom manufacturing is available at the request for a large-size and a special size depending on the place where this product is applied. 3. Introduction 4. Application - Coupling |
Equipment |
| 630 | Flexible Scale | ArisuTec Co., Ltd. | http://arisutec.com | 1. Outline • Recovers the water flow function of water pipes by removing rust. scales. slush. and others. with physical properties only. that is. without using harmful chemical substances • Does not cause any building damage between constructions or pipe rupture • Recovers the water flow function of old pipes by removing and preventing corrosion and the extension of life cycle after rehabilitation construction 2. Introduction 14Biz-149.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-149.JPG'>3. Characteristic • Easy construction during the installation phase regardless of pipeline type (ㄱ. ㄴ. u. and s) - A flexible wire manufactured with a spherical material is engaged with a collet chuck installed in a grinder. and when the motor of a grinder operates. the head attached on the wire tip rotates with a constant speed and goes through the interior of old pipes from the start point (a) to the end point (b) of pipes. - The head on the wire end penetrates the interior of old pipes blocked with rust and scales because it is constructed with a ball-shaped structure and works as a guide to search until the end point of pipes (b) freely. - When it goes forward from the start point (a) and reaches the end point (b) of pipes. it attaches a sintered carbide. auxiliary materials. and a brush and keeps going back and forth using the centrifugal force caused by the high-speed rotation (about 54.000 rpm) of the grinder to completely remove the remaining foreign substances on the curved surface of pipes. - The same grinding effect occurs on the entire section of old pipes during grinding because the curve is made about 30 cm apart on the wire-fixed handle attached to the grinder. 4. Application • Rehabilitation of old water pipes in households. houses. and buildings |
Equipment | |
| 631 | Flexible Spiral Conveyor | MDB 50~90, MDS 40~85, MDK65 | Duk Young Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Outline - This machine can deport waterish or sluggish raw material that is impossible to be deported by air absorbing conveyer. 2. Introduction 3. Characteristics - As this machine use flexible ducts. composition of ducts is optional. 4. Application |
Equipment |
| 632 | FLEX-SBR | FLEX-SBR | Samchully Enbio Co. Ltd. | http://www.senbio.co.kr/ | 1. Outline This FLEX-SBR is an advanced waste water treatment technology that discharges treated water through an up-and-down flow type treated water discharger and rapid changes in anaerobic condition. oxygen free condition and aerobic condition by installing two variable form partition walls in a SBR reaction tank that can be opened and closed by a driving device . 2. Introduction 3. Characteristics - Technology that can actively cope with changes in load inflow - Denitrification and phosphorus removal efficiency can be maximized by a clear and rapid change speed of “phase” - Treated water discharger that can adjust the quantity of water to be treated - Effective use of organic source by applying raw water distribution and inflow condition - Easy maintenance - Area required to install this product can be minimized 4. Application - Advanced waste water treatment |
Technology & Process |
| 633 | Float Check Valve for Floating Roof Drain | WC511, WC512 | Corporation WIN | http://www.corpwin.com | 1. Outline Model WD51 system is used to drain out for rain of internal floating deck of the internal floating roof tank. 2. Introduction Model WC511. float check valve is side mounted type to install in water sump of floating roof deck and Model WC512 is bottom mounted type to install under water sump of floating roof deck. 3. Characteristics - Model WC511 . Size: 3. 4. 6. 8 . Side mounting type - Model WC512 . Size: 3. 4. 6. 8 . Bottom mounting type 4. Application Drain out for rain of internal floating deck of the internal floating roof tank | Instrument & Chemicals |
| 634 | FLOAT TYPE FLOWMETER | FLOAT TYPE FLOWMETER | WOORI ENVIRONMENT TECHNOLOGY CO., LTD | http://www.wooritms.co.kr/ | 1. Outline FLOAT Flowmeter is a measuring instrument to measure the level of Parshall Flum or Weirs with a FLOAT sensor and change the measured electric signals into flow amount by a Micro Processor. Users can choose the flowmeter type – WE-PF2000MS (integrated type) and WE-PF2000MP (separable type) – according to the condition of the site. 2. Introduction 3. Characteristics - Reasonable price - Easy maintenance - Separable type is available for caustic wastewater - Select an ultrasonic type when there are many solid matters in the water 4. Application - Measurement of flow amount |
Equipment |
| 635 | Floating and separating system | PAF system (Prima Air Floation) | Prima Ateck Co., Ltd. | http://www.primaind.co.kr/ | 1.Outline The system is operated under the similar principles to existing floating and separating system. but it is much more innovative in the design and structure respects than them. so that it ensures a high efficiency of operation and reduces the investment and maintenance costs. 2. Introduction Raw water mixed with cohesive agents naturally or forcibly flows to the system and is mixed in a floater and generates air bubbles that are aerated strongly through a hollow-shaft aerator. The ultra micro air bubbles are agitated with solid substances in the raw water. and the cohesive solid substances in the water becomes floated on the surface. At that time. the solid substances are moved to a separator together with the water and form a layer separated from the water. After treatment. clean water flows under the solid substance-treating device and to a treating tank via an overflow wall for discharging to the outside. At that time. the treated water is naturally drained or forcedly conveyed. depending upon the conditions of the site. The solid substances layer formed thick on the surface of water is pushed by a scraper and moves to a solid substance outlet. Then. the solid substances are discharged by a screw conveyor. dewatered. or conveyed to a storage tank. Heavy solid substances on the bottom of the tank are recycled through pore canals installed on the bottom and separated. Alternatively. they are separately discharged through grit removal system and appropriately treated. 3. Characteristics 1) Simple package type 2) Full auto operation 3) Easy maintenance 4) High. continuous treating efficiency 5) Low investment cost 6) Low operation cost 4. Application Pulp/paper manufacturing factories. various chemical engineering factories. livestock treatment zones. oil refining factories | Equipment |
| 636 | Multiple-disk Flexible Thickener with a Floating Ring Rotational Structure | http://www.hongwooeng.co.kr | 1. Outline • This is a multiple-disk flexible thickener with high concentration performance (surplus sludge: 90%; raw sludge: 87%) and a high solids recovery rate (98% or more). • Its structure has a regular gap that is created between multiple anchoring disks and a floating ring that is inserted into the gap to form a cylindrical screen. It also has a screw feeder in the cylinder. 2. Introduction 14Biz-448_Multiple-disk_Flexible_Thickener_with_a_Floating_Ring_Rotational_Structure.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-448_Multiple-disk_Flexible_Thickener_with_a_Floating_Ring_Rotational_Structure.jpg'>3. Characteristics • Prevents abrasion because of the 360° rotational structure and has semi-permanent durability • Excellent versatile application: Shows even water content percentage and recovery rate regardless of the types of sludge. such as raw sludge. surplus sludge. and mixed sludge; both powder and liquid coagulants can be used for the flocculation tank of the front-end thickener. • Economic benefits and ripple effect of the process because of its powerful recovery rate (95%) 4. Application • Sewage treatment plants • Wastewater treatment plants |
Equipment | ||
| 637 | Floc sensor and controller | Floc sensor and controller | Hwan kyeong Bio Co., Ltd. | http://www.enbio.net | 1. Outline - Floc sensor and controller 2. Introduction 3. Characteristics - Real-time measurement of the average diameter from the micro floc to matured floc. - Available to check out the coagulant condition by the simultaneous measurement of floc concentration (floc per mL). - Available to measure in the raw water by direct-submerged sensor. - Simultaneous measurement of ultraviolet rays and infrared rays (due to the material absorbing the ultraviolet rays in some cases). - Ultraviolet rays : measurement of floc size - Infrared rays : measurement of floc amount 4. Application - Intake and intake well - Outdoor and the surface of river |
Equipment |
| 638 | Flocculator & Flash Mixer | Wise EnTech Co., Ltd. | http://www.wtcom.co.kr/ | 1. Outline - Installed in the water purification treatment (waterworks) plant to mix the inflow water containing chemical by stirring paddle and to speed up the floc growth for increasing the coagulation 2. Introduction 3. Characteristics ① Flocculator - Flocculation effect is big enough and the shaft can be extended (horizontal type) - Simple maintenance and economical (horizontal/vertical types) - Installed in the large water purification facility (horizontal type) - Installed in small/medium water purification facility (vertical type) - Rotation reduction gear is used to minimize the power loss. ② Flash Mixer - Manufactured with appropriate impeller types to prevent drift and for perfect mixture according to the mixing capacity - Manufactured with optimized rotation with minimized frictional resistance to minimize the power loss - Shaft and impellers have been manufactured after thorough consideration of corrosion and strength 4. Application - Flocculator & Flash Mixer |
Instrument & Chemicals | |
| 639 | Flow Control Device (Hydro-Brake) | Flow Control Device (Hydro-Brake) | D.I ENVIRO | http://www.di-eng.co.kr/ | 1. Outline • This device installs a technology with a combined sewer system in a storm overflow diverging tank. The installed technology maintains a constant collected discharge volume delivered into sewage treatment plants. • This device uses a technology with a separated sewer system to control the first flush flowing into first flush treatment facilities in the area. • This device installs a flow-control technology in storage facilities or in outlet opening of dams to prevent sewer pipes from overflowing and river flooding. 2. Introduction 14Biz-27.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-27.JPG'>3. Character • It has no moveable parts and does not require an external power source. • It is easy to maintain. • It prevents clogging because its outlet opening is three to six times larger than the conventional controls. • It has 30% more storage capacity compared with an orifice. • It can be configurable to adapt to any flow control situation. • It is easy and fast to install. • This device is installed in over 10.000 facilities worldwide. • Its material is made of more than 30% of sts. 4. Application • Constant control system for collected storm-water discharge from diverging tanks • Storm-water management • Source control (non-points source) • Storm water control in new development districts • Flow storage facilities • Treatment plants for storm-water and sewer overflows • Flow balancing. attenuation. and bifurcation • Land discharge (temporal flow storage) • Velocity control |
Eco-Friendly Products |
| 640 | FLOW METER | Glass Taper Tube Floating-Type Flow Meter | FLOWNICS Co., Ltd. | http://www.flownic.co.kr | 1. Outline This flow meter. a flange-joint flow meter convenient for an industry pipe. has a high performance and a high safe property. This meter is simple in structure and uses a taper pipe as a hard glass pipe. thus improving a heat-resisting limit and mechanical properties. 2. Introduction - Joint specification KS(JIS) 10 kgf/㎠G RF(FF) Flange. ANSI 150#RF Flange PT Screw 3. Characteristics 1) Confirm instant flow within the pipe 2) Flow ratio: 10:1 3) Degree: ±2%F/S 4) Easy installation and maintenance 5) Low pressure loss 4. Applications Flow check and control | Equipment |
| 641 | Flow table screw spin dryer | Flow table screw spin dryer | DONGSHIN EN-TECH Co., Ltd. | http://www.sdaf.net/ | 1. Outline - This flow table screw spin dryer produced by DONGSHIN EN-TECH CO. LTD is a hot air drying typed flow table screw spin dryer. 2. Introduction 3. Characteristics - Highly efficient dehydration. - Easy to adjust throughput and moisture content - Water can be brought in a stable manner; bad smell can be removed. -Thickener and storage are not required. - Continuous back washing is not required. - Consumables that should be replaced periodically are not required . - Running cost can be reduced. - Easy to maintain. 4. Application - Spin dryer |
Technology & Process |
| 642 | Flow-meter for wastewater | SSWCA Series | DS Water | http://www.dusanmeter.co.kr | 1. Outline - Propeller type flow-meter that operates with the smallest flow speed. which is different from general flow-meter method that operates in water pressure 2. Introduction 3. Characteristics - Structure that does not clog foreign substance. remnant - Main body part is made of stainless steel which has excellent durability. so optimal for chemical liquid gauging - Even though main body is connected to pipe. it is separable. and can be easily checked 4. Application - Gauging wastewater flow |
Equipment |
| 643 | Fluid Biological Slime Carrier | Biogreen Media | Green Technology Co., Ltd | http://www.greenenc.com | 1. Outline - BioGreen Media serves as a biological slime carrier that maximizes benefits and makes up for shortcomings of the existing solid and fluid membrane encasing high-performance LOCK into a durable synthetic resin case with wide gaps. 2. Introduction 3. Character - BioGreen Media features LOCK whose surface area and adaptability to biological body is significant into a case whose surface area is wide and durable and is capable of carrying and reproducing greatly activated biological slime in large quantity. - BioGreen Media excels in flexibility through adjustment so that slime may not be deposited on the bottom of reaction tank or may be evenly spread on the surface. - BioGreen Media’s detachment and replacement of aged biological slime allows for the selection and fermentation of greatly activated microbes -In expanding treatment capacity. it enables installation to be hastened only by inserting into aeration tank instead of stopping operation or emptying aeration tank. -It can respond to treatment efficiency and load change. produces less sludge and provides cost-effective treatment system. 4. Application - Fluid Biological Slime Carrier |
Instrument & Chemicals |
| 644 | Fluid Flow Tube | Fluid Flow Tube | JINWON Co., Ltd | http://jwepc.com | 1. Outline - Fluid Flow Tube 2. Introduction - Materials - Main body: GCD 450 of KSD 4302(spheroidal graphite iron) - Packing: KS M 6613 - Seal stamp: Blackout epoxy resin detachment seal 3. Character - Light and durable due to an EPC method. - Internally hardly corruptible for internal side of the tube as electrostatic coating. - Safe given that packing is attached to home and no derailment and friction is found. - No leakage due to double exponential method. - Applicable pressure: 10kg/cm3. 4. Application - Fluid flow tube used to connect water and drainage pipe. |
Instrument & Chemicals |
| 645 | Fluorine treatment system | IS-FR SYSTEM | Il shin Environmental Engineering Co., Ltd. | http://www.okilshin.co.kr | 1. Outline - It is able to maintain the concentration of fluorine below 8ppm with first treatment when the inflow concentration is below 10.000ppm. It uses the fluoridizer instead of alum and makes the condition of reaction tank full of CaF2 by reaction of sludge. - It reduces the sludge emission by 1/2 compared to alum and downsizes the capacity of dehydrating machine due to the high dehydrating efficiency. 2. Introduction 3. Characteristics - Use by minimum facility investment : IS-FR system does not need the new wastewater treatment facility. It uses the conventional condensing and precipitating facility and only adds the partial reaction tank. control system and sledge-circulating equipment. - Improvement of treated water quality : the conventional first condensing and precipitating treatment can not treat the concentration of fluorine below 15ppm although it uses the large amount of chemicals. However. IS-FR system can treat the concentration of fluorine below 8ppm by only using small amount of fluoridizer. - Reduction of sludge emission : it reduces the emission of sludge caused by injecting chemicals because it injects the small amount of fluoridizer. Also. it reduces the water content of sludge of dehydrating machine due to the high ratio of CaF2. For these two synergy effect. it can reduce the emission amount of sludge. - Saving the treatment cost : it saves the sludge treatment cost as well as production cost by reducing the treatment chemicals and alkali. 4. Application - Electricity and electronics - Ceramic industry - Steel industry |
Equipment |
| 646 | Flushing Type MAT403W | Flushing Type MAT403W | MAT | http://www.mat.co.kr | <h3 class=prod_h3> </h3> <ul class=smell01List> <li>Wet type system</li> <li>Inlet anti clogging System</li> <li>Safety design with metal core frame and reinforced plastic</li> <li>Dual path design with high efficiency for Wet Chamber</li> <li>PLC control with Automatic system</li> <li>Certified Semi S2 Mark</li></ul> <div> </div> <div> </div> <li><strong>Power : </strong>A/C 200~240V. 3phase. 15Amp</li> <li><strong>N₂:</strong> 4~7kgf/cm²(20slm). 1/4″Tube(Optional)</li> <li><strong>City Water : </strong>3~5kgf/cm²(3ℓ/min). 3/8″Tube</li> <li><strong>Gas Inlet : </strong>NW50 Flange 4ports</li> <li><strong>Drain : </strong>Acid Drain <strong>1)</strong> Natural Drain : 40A PVC Pipe <strong class=left110>2)</strong> Power Drain : 26mm PVC Pipe</li> <li><strong>Gas Exhaust :</strong> -50~-100mmH<sub><font size=2>2</font></sub>O. 1m³/min. 76mm PVC Pipe</li> <li><strong>Cabinet Exhaust :</strong> -50mmH<sub><font size=2>2</font></sub>O. 1m³/min. Φ100mm(Optional)</li> <div> </div> | Air Treatment |
| 647 | Flushing Type MAT502W | Flushing Type MAT502W | MAT | http://www.mat.co.kr/ | <div> </div> <li>Wet type Scrubber for Epi Process</li> <li>4 Chamber in system with multi-stage Treatment</li> <li>Venturi water nozzle system with long gas pass (Wetting zone) design</li> <li>Inlet anti clogging System</li> <li>Automatic PLC control with Touch screen</li> <li>Certified CE Mark</li> <div> </div> <li><strong>Power : </strong>A/C 200~240V. 3phase. 15Amp</li> <li><strong>N₂:</strong> 4~7kgf/cm²(15slm). 1/4″Swagelok. Inlet Purge</li> <li><strong>City Water :</strong> 3~5kgf/cm²(8ℓ/min). 1/2″PVC Pipe</li> <li><strong>Gas Inlet :</strong> NW50 Flange NW40</li> <li><strong>Drain :</strong> Acid Drain <strong> 1)</strong> Natural Drain : 40A PVC Pipe <strong class=left110>2)</strong> Power Drain : 26mm PVC Pipe</li> <li><strong>Gas Exhaust : </strong>-50~-100mmH<sub><font size=2>2</font></sub>O. 1m³/min. 50mm PVC Pipe</li> <li><strong>Cabinet Exhaust :</strong> -50mmH<sub><font size=2>2</font></sub>O. 1m³/min. 75mm PVC Pipe</li> <div> </div> | Air Treatment |
| 648 | Fluxional microorganism Media | BioGreen Media | Green Engineering and Construction Co., Ltd. | http://www.greenenc.com/ | 1. Outline A contact oxidizing method. in which fluxional microorganism contact materials are fed into a reaction tank. is a composite proliferation method of carrying out a floating proliferation and an adsorptive proliferation of microorganisms. and has various effective properties as securing more various microorganisms in a high concentration than other biological film methods or floating proliferation methods. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000285-2.jpg></center> 3. Characteristics (1) It has excellent correspondence power and tolerance to a load change and toxic materials. (2) It carries out a stable treatment quality as the biological film protects microorganisms. (3) It has an excellent nitrifying efficiency as nitrifying germs easy to be cleaned are multiplied well in the biological film. (4) It can selectively maintain and abandon greatly active microorganisms and aged microorganisms. (5) It is easy to operate and manage due to reduction of sludge bulking and floating problems. 4. Application (1) Various sewage treatment systems (2) Wastewater treatment systems (3) Sewage treatment systems (4) Wastewater treatment systems | Instrument & Chemicals |
| 649 | FMX | Karman Vortex | Boo-Kang Tech | http://www.bkt21.co.kr | 1. Outline - The strong effect comes from rotational motion formulates a specific eddy. one of those eddy called Karman Vortex effect generates constant eddy effect with little energy. - FMX uses natural power of eddy at the Karman Vortex effect. - FMX is a membrane separation equipment inhibiting membrane fouling by generating vortex in the flat sheet membrane. 2. Introduction 3. Characteristics - The powerful vortex applied in the FMX significantly reduces membrane pollution by the pollutants and sensitive membrane pollution reaction. - FMX can generate a strong shear on the surface of membrane. overcoming limits of the previous membrane processing which generated shear by using cross-flow. - The advancement of membrane pollution resistance will lead the flexible application by lowering the limits at the treatment processing and it will wider the selection of separation membrane. 4. Application - The best multi-separation membrane system. which is applicable to various fields such as resource recovery. purification treatment. reuse. separation concentration. etc. according to their characteristics. - FMX is a very specialized technology enables separation. recovery. and purification of the high-concentration malignant substances. which was not possible with previous separation membrane technology. Further. it is the only technology around the globe that is innovatively lowered the membrane obstruction effect that the previous membrane had as well as capable of treating the high-concentration. high-viscosity substances with TS 20%. |
Equipment |
| 650 | Food Turbine Flow Meter WS | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline - This Gas Turbine Flow Meter is very simple in structure. small-sized and lightweight so that its handling is convenient. As for measurement target fluids. low viscosity liquids and any gas without impurities can be measured. so this flow meter is applied to a variety of industries including petro chemistry. chemistry. environment. food and beverage and so on. 2. Introduction 3. Characteristics - Turbine Flow Meter WS Model Series for food sanitation are diversely applied in the food and pharmaceutical industries including medicines. milk and juice. - This product has acquired a 3-A Sanitary Standard for the food. - The application caliber ranges from 1/2 to 3. - The measurement range is from 2.2 ~ 22 L/M to 222 - 2225 L/M. - The degree of high precision is 0.5%. 4. Application - Food Turbine Flow Meter WS |
Equipment | |
| 651 | Food Waste Biogas Energy Facilities | Young Plant Inc. | http://young-plant.com/ | 1. Outline • This builds an energy saving system. such as the production of biogas. high-efficiency facilities. and process improvement through new and renewable energy anaerobic energy by reduction plan of greenhouse gas. It also neutralizes carbon emission by plantation and building. 2. Introduction 14Biz-130.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-130.JPG'>3. Character • Anaerobic digestion method on food waste effluent • Acid fermenter anaerobic digestion tank two-phase thermophilic digestion method • High digestion tank efficiency and biogas generation amount • Low power required and stable maintenance of microbes • Less odor and small area required • Odor control facilities • Three steps and double odor treatment facilities • Constructs a multiphase odor system • Divides low and high concentration odor facilities separately and constructs facilities • Effective in extensive odor: consist of regenerative combustion apparatus with excellent removal efficiency and three-phase chemical solution wash tower • Wastewater treatment facilities • Flocculation tank > Dissolved air floatation > Linked treatment • Easy operation and low treatment cost • Nitrogen removal rate: 15%–20% • Selects the most economical and efficient process to follow linked standard of sewage treatment plant • Easy operation and maintenance due to simple process and stable treatment efficiency • Uses digestion gas as heat source • Biogas storage tank > Gas boiler (generator) > Heat source use • Uses biogas as heat source to raise the temperature of digestion tank • Energy independence by producing electricity and steam 4. Application • Food waste disposal |
Equipment | |
| 652 | Food waste disposer | Wafree | AMECO ENVIRONMENT CO., LTD | http://wastefree.kr | 1. Outline - This food waste disposer disposes up to 95% of input food waste. Combining biochips and microorganisms. the disposer rotates horizontally and vertically. up and down. left and right and holds a patent for its mixer. The product ferments the food waste with its patented technology and increases the number of the population which surviving for quite a long time. 2. Introduction 3. Character - Create environment-friendly businesses and restaurants. - Cost-cutting and early withdrawal of investment costs. - Bad smell removal. - Easy disposal of food waste. 4. Application - Food waste disposer |
Equipment |
| 653 | Food waste disposer | Pyeonhan Saenghwal, or Comfortable Life | Geoseong Co., Ltd | http://www.gsstar.co.kr | 1. Outline - The technology is comprised of grinding. segregation for reducing quantity. and water purification system. It improves water pollution using by EM (Effective Micro-organisms). 2. Introduction 3. Character - Processing method : Blade liquid elimination system - Electric charge : Less than 500 won per month - Processing time : Within 20 seconds 4. Application - Food waste disposer |
Equipment |
| 654 | Food waste reducer | SL-708S | Sink Leader | http://www.sinkleader.com | 1. Outline - GWG System food waste reducer to be attached to sink by GDL (Grinding. Dehydration. Loss) method 2. Introduction 3. Character - Easy to use (food waste wet treatment attached to sink) - Real-time processing (around 20 seconds) - Triple safety sensor technology 4. Application - Food waste reducer |
Equipment |
| 655 | Food waste treatment equipment | Food waste treatment equipment | HALLA ENGINEERING & INDUSTRIAL DEVELOPMENT CO. LTD | http://www.hallasanup.com/ | 1. Outline This equipment stable processes organic waste by using an anaerobic digestion. It is suitable for equipment for processing garbage and high concentration organic wastes. which contains a large amount of salt and moisture. 2. Introduction (See attatched image file) 3. Characteristics 1) Urbane type environmental-friendly anaerobic digestion equipment 2) Reduce the load of an incineration field and a reclaimed land due to highly reduced amount of waste 3) Greatly contribute to the recycling of resources by producing high-quality organic composts and biogas (main component: methane) 4. Applications 1) Food waste treatment 2) Sewage sludge treatment 3) Livestock night soil treatment 4) High concentration organic waste treatment | Equipment |
| 656 | Food waste treatment system | Food waste treatment process Bio-MG II | ViROBACT Inc. | http://www.virobact.co.kr | 1. Outline Our company has developed specific strains based on bioengineering. and has a technology to perfectly extinct and treats food wastes into specific microorganisms at the first stage with no second pollution without incineration treatment. which causes the second pollution problem like dioxin. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000298-2.jpg></center> 3. Characteristics (1) It has biochip inside the extinction tank to control temperature and moisture percentage. and can rapidly complete all processes within 24 hours by only a process of feeding food wastes. (2) It is an energy saving type agitation system. (3) It can extinct not only food wastes but also organic waste matters (animal. vegetable. and fish-and-shellfish). (4) It can easily remove foreign matters mixed in food wastes (vinyl bags. chopsticks. and so on). 4. Application Places where food wastes are generated | Equipment |
| 657 | Food Waste Weight Reduction Device | Food Waste Weight Reduction Device | Jungdo Tech Co., Ltd | http://www.jungdotech.co.kr | 1. Outline - The product may be used semi-permanently involving high-temperature actinomyces microbes that can be fermented under the highly salty and slightly acid conditions. If food waste is decomposed through the use of enzymes caused by microbes. the decomposition produces carbon gas and ammonia. causing no emissions of air pollutants. 2. Introduction 3. Character - Real-time input of food waste. - Making food waste fertilizer or animal food by using high-temperature microbes. - No polluted and waste water. - Capability to process weight reduction by using a stirrer structure consisting of the first and second mixers. - No odor thanks to a cooling deodorization method. -Application of highly durable stainless steel. -Lowest maintenance cost. 4. Application - Food waste treatment. |
Equipment |
| 658 | Frata (PISTON TYPE injection chemical dissolving equipment) | ARK Co., Ltd. | http://www.ar-korea.com/ | 1. Outline - Chemicals in chemical box go inside the chamber and are injected by Piston Type injection equipment (changes the amount of injection by altering round distance). In addition. water is provided up to limited level and agitated with chemicals by additional agitator. 2. Introduction 3. Characteristics - Transfer chemicals up to the measure of capacity of PISTON by PISTON round movement - Reusable chemical box - Provide the air into devised chamber. agitate and inject chemicals 4. Application - PISTON TYPE injection chemical dissolving equipment |
Equipment | |
| 659 | FREETA (Piston-type Quantitative Injection Chemical Dissolver) | FREETA (Piston-type Quantitative Injection Chemical Dissolver) | ARK Co., Ltd. | http://www.ar-korea.com/ | 1. Outline • FREETA is inserted to the body of a unit by a piston-type quantitative injection device and works in a way that the chemical in the upper bucket flows down naturally. • Water is injected at a certain level and mixed with the chemical by an individual mixer in the device. 2. Introduction 14Biz-49.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-49.JPG'>3. Character • Transports chemical by the to-and-fro motion of the piston and determines the transportable amount of chemical depending on the capacity of the piston • Recycling of the chemical buckets • Inflow or mixing of the chemical by aerating the chemical bucket with the specially designed chamber 4. Application • Sewage treatment • Sludge treatment • Sludge digestion tank • Dehydrator |
Eco-Friendly Products |
| 660 | Freshwater Generator for Submarines | Freshwater Generator for Submarines | Krosys Inc. | http://www.krosys.com | 1. Outline • Constructed to satisfy the rigid requirements of military standards. such as design. impulse. vibration. and noise • Generates noise of less than 60 dB. which is almost the same as the acceptable noise level in hospitals and libraries 2. Introduction 14Biz-106.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-106.JPG'>3. Character • Has an electrical valve for the water supply inlet of 25-nM nominal torque • Provides high pressure of 316 STS for excellent stability and durability • Has a regulator valve for use in seawater (316-STS pressure) • Stable fluctuation pressure • Solidity with powder coating stainless steel frame • Provides IP23 protection quality to secure safety • Has a digital and analog water quality indicator • Safe from external shock that may be caused by noise detection. vibration. or noncontact underwater explosion 4. Applications • Freshwater generator for submarines |
Equipment |
| 661 | FRP Cover | FRP Cover | Wonchang Entec Co., Ltd. | http://www.wontec.co.kr | 1. Outline ① Dome type cover FRP (fiber reinforced plastic) of top strength and least thermal expansion coefficient among the plastics. which is easy to combine with metal. is designed by the thin film structure theory for sufficient structural intensity. so it is possible to manufacture large odor prevention dome that is safe against wind pressure and snow load. ② Round type cover Roller is attached on the bottom and rail is installed on the ground. so it is easily applicable for repair and maintenance. ③ Flat type cover Can manufacture large round type of various colors and shapes by structural design according to the strength calculation for light weight and high intensity 2. Introduction ① Dome type cover ② Round type cover ③ Flat type cover 3. Characteristics ① Dom type cover * Robust against corrosion * No discoloration by ultra violet rays as UV stabilizer has been included * Assembly shape is as above. which is easy for maintenance * Partial damage by excessive exterior shock can be completely repaired. ② Round type cover * Robust against corrosion * No discoloration by ultra violet rays as UV stabilizer has been included * Assembly shape is as above. which is easy for maintenance * Partial damage by excessive exterior shock can be completely repaired. ③ Flat type cover * Robust against corrosion * No discoloration by ultra violet rays as UV stabilizer has been included * Assembly shape is as above. which is easy for maintenance * The dimension is stable and its strength is uniform as of drawing process by the mold * Partial damage by excessive exterior shock can be completely repaired. 4. Application - Manufacturing. repairing. and inspection of large round odor prevention dome of various colors and shapes by structural design according to the strength calculation for easy application. light weight. and high intensity |
Equipment |
| 662 | FRP DUCT | FRP DUCT | Wonchang Entec Co., Ltd. | http://www.wontec.co.kr | 1. Outline FRP duct is the facility to collect odor in the source. pressurize and send to the odor removal facility. which must be designed. manufactured. and installed through perfect structural calculation. 2. Introduction 3. Characteristics - Light FRP material of about 1/4 specific gravity of steel - Superior in electric insulation - Safe in case of fire. as it uses self-extinguishing inflammable resin - Mechanical strength is superior to other materials - Excellent thermal resistance (Commercial polyester is no higher than 180℃) - Superior heat insulation of 1/200 compared to steel. and excellent weather resistance - Wide application range as of corrosion-proof materials. and superior workability (light weight. easy fabrication) - Low friction coefficient 4. Application - Odor removal pipeline facility that collects odor generated in the odor source. pressurizes and sends to the odor removing facility |
Equipment |
| 663 | FRP Paddle | FRP Paddle | Wonchang Entec Co., Ltd. | http://www.wontec.co.kr | 1. Outline FRP paddle is installed in the coagulator of water purification facility and expands the surface area to enhance the flocculation mixing degree. which has been manufactured with the structure to prevent destruction of floc shape by rounding treatment of the junctions of each surface of the paddle. It is the equipment manufactured in M-shape that can enhance the flocculation mixing degree most efficiently. 2. Introduction 3. Characteristics - M-shape structure to enhance the flocculation mixing degree most efficiently also to raise the strength - Maintenance is easy and economical - Flocculation effectiveness can be optimized with the velocity gradient design according to the condition of each raw water quality. - Each impeller paddle has been designed and manufactured with the robust material of strong rigidity and high acid/base resistance - Designed and manufactured with light hollow shaft to maximize the torsion moment allowance. - Rotation reduction gear is adopted to minimize the power loss. 4. Application - Enhance the flocculation mixing degree |
Equipment |
| 664 | Fuel Cell Inverter | DSF-121K | DASSTECH Co., Ltd. | http://www.dasstech.com | 1. Outline - Fuel cell inverter is a device that converts DC power which is generated from fuel cell using Hydrogen Gas to AC power. and controls electricity around the system. 2. Introduction 3. Characteristics -Higher energy efficiency by 10 - 20% than existing energy sources as the device does not pass through the process of fuel combustion and the thermal energy conversion into mechanical energy - It can perform desulfurization and the dust removal sufficiently thereby it does have little emissions of SO₂and the dust - With high level of integrated efficiency. it produces less CO₂ 4. Application - Fuel Cell Power Generation - Fuel Cell Vehicles |
Equipment |
| 665 | Fuel Cell Product | Fuel Cell Product | POSCO ENERGY | http://eng.poscoenergy.com/_service/main.asp | <div>product specifications</div> <div> </div> <h3>Power output</h3> <ul> <li><em>Power output</em><span>2.500kW</span></li> <li><em>Voltage</em><span>13.8k VAC</span></li> <li><em>Standard frequency</em><span>60Hz</span></li></ul> <h3>Exhaust gases</h3> <ul> <li><em>Conditions</em><span>Utilizing hot water and steam</span></li> <li><em>Exhaust temperature</em><span>344˚C</span></li> <li><em>Exhaust flow</em><span>16.601 kg/hr</span></li> <li><em>Exhaust pressure</em><span>127 mm H<sub><font size=2>2</font></sub>O</span></li></ul> <h3>Power generation efficiency</h3> <ul> <li><em>LHV</em><span>47% ± 2%</span></li></ul> <div><span></span> </div><span> <h3>Water consumption</h3> <ul> <li><em>Water supply</em><span>2.010 liter/hr</span></li></ul> <div> </div> <h3>Pollutant emissions</h3> <ul> <li><em>NOx</em><span>0.4 ppm or less</span></li> <li><em>SOx</em><span>0.001 ppm or less</span></li> <li><em>CO</em><span>10 ppm or less</span></li> <li><em>Noise</em><span>72 dB(A)(3m)</span></li></ul> <h3>LNG consumption (BOL)</h3> <ul> <li><em>LNG</em><span>0.4 ppm or less</span></li> <li><em>NHV</em><span>9.347 kcal/Nm³</span></li></ul> <div> </div> <div> </div></span> <div> </div> <div> </div> <div> </div> | Energy |
| 666 | FULL AUTO PRECOAT FILTER | FULL AUTO PRECOAT FILTER | DOORI FILTER SYSTEM | ttp://www.fillko.com | <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; font-size: 12pt; mso-font-width: 100%; mso-text-raise: 0pt;><font face=굴림 size=2>1. As the base filter is not replaced but only the low priced filtering element is replaced. the replacement cost is low. As it can filter out the foreign matter down to 0.5㎛. it can accomplish the precision filtering.<br>2. The diatomite is widely used as the filtering element in the pre-coat filtering equipment. It is produced when the single-cell algae called the siliceous algae is deposited below the sea for long time. So. as the diatomite is made into rock in the ground. it is mined and then processed into powder.<br>3. If the small particles of diatomite are coated over the base filter. there are a lot of fine pores between particles of diatomite. which can filter out any impurities.</font></span></div><div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; font-size: 12pt; mso-font-width: 100%; mso-text-raise: 0pt;><font face=굴림 size=2>The system is made of filtering materials dispensing device. pre-coat tank. sludge tank. filtering device and dewatering device. The system is automatically operated and it can be operated through touch screen with the operation status displayed and controlled on it.</font></span></div><div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; font-size: 12pt; mso-font-width: 100%; mso-text-raise: 0pt;><font size=2></font></span> </div><div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; font-size: 12pt; mso-font-width: 100%; mso-text-raise: 0pt;><font face=굴림 size=2>Filtering manufacture liquid for automobile parts. high mrecision machine component. Semiconductor wafer. SI. SIC. ceramic. cemented carbide. carbon. tempered glass. metal compounds. aluminum. copper. stainless steel. honing. boring. super finishing. glass. stone. gear. casting. nonmetal and other<br>Filtering for oil. chemical. biodiesel. waste oil. heat treating oil. turbine oil. compressor oil. a highly polymerized compound. chemical product. drinks. juice. vinegar. medicinal herbs. soy source. fish sauce. fruit sugar. soju. traditional wine. wine. beer. sesame oil. cooking oil. frying oil and other</font><br></span></div><div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; font-size: 12pt; mso-font-width: 100%; mso-text-raise: 0pt;></span> </div><div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; font-size: 12pt; mso-font-width: 100%; mso-text-raise: 0pt;></span> </div> | Equipment |
| 667 | FUME COLLECTOR (CF - TYPE) | CF - TYPE | CNA | http://www.cnaplant.com/ | 1. Outline - The Fume Collector (CF-TYPE) is a mobile collector that can remove fumes generated in various welding works including ARC. CO2. MAG and Argon and its price is relatively reasonable and it is a useful product if there are not many welding works. 2. Introduction 3. Characteristics - Turbo- Blower ㆍInstalled with a non-vibration. low-noise turbo fan through high-precision work and electronic balancing work. ㆍIncreased suction efficiency through minimization of air friction resistance. - Manometer ㆍCheck on the status of dust accumulation in a filter. ㆍCheck on the time of dust removal and the time of filter replacement. - Control Panel ㆍInstalled with a lamp that checks operating conditions. - Caster ㆍConvenient moving and installation due to the installation of moving casters. - Filter ㆍSquare filter that provides high filtration area by overlapping filters in a narrow space. - Flexible arm ㆍImprovement of workers health and work efficiency as fumes are sucked and removed at the emission source by using a flexible arm which moves freely. - Dust removal method ㆍAutomatic shaking: automatic removal by installing a low-speed motor. ㆍManual shaking: manual shaking by using a shaking bar. 4. Application - Fume Removal |
Equipment |
| 668 | Conventional type Fume hood | ELF-BP | Green FlowTech | http://www.gftech.kr/ | 1. Outline A fume hood is typically a large piece of equipment enclosing five sides of a work area. the bottom of which is most commonly located at a standing work height. 2. Introduction .JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/5(2).JPG'>3. Product Specifications - Exterior : Steel / Stainless steel - Interior : Melamine laminate panel / Stainless steel - Face velocity : 0.5m/s (Front door 400mm open condition) - power : single phase 220V. 250W~600W. 4. Applications inhaling toxic gases biosafety cabinets glove boxes |
Equipment |
| 669 | Functional Eco Wallpaper (Meme) | Functional Eco Wallpaper (Meme) | T.P.M Co., Ltd. | www.tpm21.net | <div>TPM Wallpaper Meme is a new concept Functional eco wallpaper that reduces weakness of existing laminated wallaper and enhance strength of silk wallpaper. When fire occurs. because of almost no toxic gas. it prevents death from suffocation. Because it starts heat decomposition on high temperature unlike silk wallpaper. it has low rist fire.</div><div> </div><div>* Waterproof : very slight tear and wetness caused by liquid.<br>* Durability : Guarantee of its life on discolor and abrasion like silk wallpaper and no scratch.<br>* Excellent color : outstanding color than other companies wallpaper<br>* Spec : 100% paper. 220g/m2. 3 patterns (grid. leaf. stone). health buiding material certification/eco label in Korea. <br>compitable inks (UV. LATEX. ECO SOLVENT)</div><div> </div><div>* Width : 1060mm <br>* Length : 30m/45m<br>* core : 3 inch<br>* surface : glitter/semi glossy<br>* packing : plain white box with pallet</div><div> </div><div> </div> | Air Treatment |
| 670 | Water pipe-type grate bar wastes incinerating furnace (cylindric and perpendicular type) | Water pipe-type grate bar wastes incinerating furnace (cylindric and perpendicular type) | Boram Environment & Technology Co., Ltd. | http://www.borament.com | 1. Outline - This perpendicular cylinder-type incinerating furnace is structured in such a manner that the bottom of the wastes hopper is positioned in the middle of the whole height of the main body and the 1st trellis tubular grate bar is installed under the bottom of the hopper. in order to prevent incomplete combustion caused by the temporary closing of the burning surface when wastes are thrown in. which is a weakness of a perpendicular incinerating furnace. 2. Introduction - It is meant to accomplish the drying of inputted wastes through radiant heat and flames of burning gases and the optimum burning conditions. The 2nd tubular grate bar is installed in such manner that small wastes falling directly from the 1st bar and non-burned wastes whose volume has been reduced withing the 1st bar may be completely burned. 3. Characteristics - This simple fixture does not frequently dysfunction and can be easily repaired if disfuctioned. - It requires an area where it is installed. compared to other incinerating furnaces. - The generation of clinkers is prevented since a consistent temperature is maintained in the furnace. - The quantity of volatile solids can be reduced since they are re-burned within ash re-combustor. - It is easily maintained since it is simply structured. - The area for its installation is minimized. - It endures for a long time since it is made of heat- and abrasion-resistant materials. 4. Application - Incinerating facilities. - Reclamaining facilities. | Equipment |
| 671 | Gas Decomposition System with Atmospheric Pressure Microwave Plasma | Gas Decomposition System with Atmospheric Pressure Microwave Plasma | Institute for Advanced Engineering | http://www.iae.re.kr | 1. Outline In order to efficiently eliminate the GWG (global warming gas). a system that can turn waste gases into by-products that can be easily treated. 2. Introduction 2-1. Waveguide-type Atmospheric Discharge System - It forms a compact system by reducing the transmission line. - Within the discharge wall. it induces gas and flames that flows in through the main gas line to the center with high energy density in order to prevent hot flame contacting with the quart tube that is the reactor chamber. 2-2. Process |
Technology & Process |
| 672 | Gas Gauge | QRO-201 | Qrotech Co., Ltd | http://qrotech.com | 1. Outline - Vehicle has emissions gauge 2. Introduction 3. Character - Convertible into gauge with 4gas/5gas. - Automatic temperature adjustment based on temperatures. - Fine design. - Automatic control of reservation hours 4. Application - Vehicle gas emission test |
Instrument & Chemicals |
| 673 | Gas Leak Alarm | GM-1000 | Wise Sensing Inc. | http://www.wisesensing.com | 1. Outline GM-1000 is the digital gas leak alarm that has adopted a micro processor. Comparing with existing products. the product has been improved drastically in terms of easy readability of indication numbers and alarm status. reliability and convenience to use. 2. Feature - Adopted a micro processor. - Inputting of Gas Sensor or Poisonous Transmitter is selectable with the jumper Pin. - A 3- color -LED bar graph display which is easily recognizable visually enables a user to operate and manipulate easily. - Normal : Green/ 1st alarm : Orange / 2nd alarm : Red (51 segments) - Linear 4~20mA DC transmission output. - Easy adjusting of alarm settings (Double alarm settings (High alarm. High-High alarm)) - Inner setting values can be adjusted without switch-off. - Simple insertion is available. A self test function. - Usable with Common Alarm Buzzer ( AM-2000). - Possible to a high density of loading by using a FRONT SIDE DIN measuring 36X144mm. - Possible to select and install either a Multi-unit case or a Single case. 3. Introduction 4. Application - Gas leak alarm. |
Equipment |
| 674 | Gas leak detector | GD-A8 | Wise Sensing Inc. | http://www.wisesensing.com | 1. Outline - GD-A8 is a basic type combustible gas leak detector and its elements consist of a Pelister type sensor which a catalytic combustion method measurement principle is used and an explosion proof box. A Wise control sensor is designed to able to detect all combustible gases and its outer box meets the explosion proof regulation that is applicable to the Ex d IIB +H2 T6. The sensors are designed to be easily replaced by opening the front cover (plug-in type). The gas detector should be installed in places such as industrial site. gas refill center. petrochemical plant. and chemical plants which have a concern for explosion or fire outbreak due to gas leak as well as in places which are easy to maintain. The gas alarm indicator should be always placed in a place which is safe and easy to monitor. 2. Introduction 3. Characteristics - Plug-in type sensor which is easy to maintain - Suitable for detecting various gases - Explosion proof box (Ex d IIB +H2 T6) - Simple and easy installation - Quick response - Long stability - Linear mV output - Indicator part(GM-1000) and alarm part (AM-2000) should be used together. 4. Application - Gas leak detection |
Equipment |
| 675 | Gas Leakage Detector | G-1100 | WISE Sensing Inc. | http://www.wisesensing.com | 1. Outline - G-1100 is a digital-type combustible gas leakage transmitter incorporating a microprocessor that can be used through the one-on-one combination with the indicator. The product enables the check of gas contents through the FND (In case of 2WIRE. it should be a LCD). In addition. G-1100. which belongs to a combination box. is prone to explosion or fire caused by gas leakage from a gas detector and should be installed in the place where maintenance is easily available. The indicator should be installed in the place where detection may easily be available in the place where it is easy and safe to detect. 2. Introduction 3. Characteristics - FND display indicating measured values (In case of a 2WIRE product. it should be a LCD display window) - LED indicating the status of a device -Easy adjustment using magnet - Internal setting adjustable without opening a box while a power is in an “on” condition. - Two cable input holes (¾” NPT. PT or PF) - Explosion proof and water-proof box (Ex d IIB+H2 T6) - ZERO SUPPRESSION function (G(X)-1100) - Easy and simple installation - Swift response - Long-term safety and life span - Linear DC 4 - 20 mA output transmission - Use of a microprocessor - The G-1100 gas leakage detector is designed to prevent industrial accidents from taking place in business sites. gas stations. petrochemical and chemical plants usually fueled by gas or generating gas (Types 1 Facility and Type 2 Facility). and thereby to detect the leakage status. In doing so. the device is used to send alarming signs to prevent industrial accidents. - The product may be used to detect combustible gas (ethane. LPG. LNG and others). poisonous gas and oxygen. - The detector may be used together with PLC. MMI. indicator and a common unit( AM-2000). 4. Application - Detection of gas leakage |
Equipment |
| 676 | Gas Monitor | Gas Monitor | QROTECH Inc. | http://www.qrotech.com | 1. Outline • This technology is a vehicle exhaust gas monitor that is a supply model of the Korea Transpiration Safety Authority. 2. Introduction 14Biz-117.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-117.JPG'>3. Character • KIOSK (17 LCD touch screen) type • Has an easy touch screen feature that does not require the use of a mouse • Has the same specifications as the Korea Transpiration Safety Authority • Applies the domestic NDIR module • Has single parts that can be easily replaced because of localization • Has low repair costs and quick alternative handling • Has an automatic water discharge device • Does not allow the flow of water into the NDIR module as it is automatically discharged after inspection; automatic removal of water and foreign substances through the converse purge function • Has a manual purge function • Has an internal heater and a probe heater with constant temperature • Has a heater with a thermoset inside. which can be installed during winter • Has a self-diagnosis function • NDIR module troubleshooting • Has an oxygen sensor and pump life cycle inspection function • Has a remote support function and a TCP × IP Ethernet communication • Automatically updates in real time • Has a remote control function using the Internet • Automatically updates at every program retry 4. Application • Various fields. such as steel. paper manufacturing. automobile. food. semiconductor. and agricultural industries; petrochemistry; chemical engineering; electronics; and others |
Eco-Friendly Products |
| 677 | Chlorine Gas Neutralization Equipment | Chlorine Gas Neutralization Equipment | HKET.CO.,LTD. | http://www.hkmic.co.kr | 1. Outline It is equipment which neutralizes chlorine gas used for sterilization in a purification plant to prevent any damages caused by the leakage of chlorine gas. 2. Introduction The equipment consists of washing tower. storage tank of neutralizing solution. blower. neutralizing solution circulating pump. If chlorine is leaked. the leaking chlorine is sucked by blower into the lower part of washing tower and neutralized by washing with trickling neutralizing solution. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000113_1.jpg></center> 3. Characteristics - Automatic running in connection with chlorine gas leak detector if chlorine is leaked. - Durability with usage of resist materials for chemicals - Easy construction and maintenance. 4. Application - Water supply treatment - Sewage and wastewater treatment. - Industrial water supply treatment. | Equipment |
| 678 | Gas Station Oil Steamer Recovery Device | SV-Station | COA F&T CO., Ltd | http://www.coafnt.com | 1. Outline This SV-Station is designed to liquidate and recover about 40 to 50 liters of oil steam. deterring harmful substances from being released and thereby promoting public health and presenting breakthrough ways to reduce cost by reusing recovered oil steam amid skyrocketing oil prices. 2. Introduction 3. Characteristics - Increase a recovery ratio by featuring a one-tier dehumidifier and a two-tier recovery chamber - Install a cold-storage system in a one-tier dehumidifier to increase a recovery ratio and reduce electric cost - Apply an open-type system so that pressure may not increase - Feature an explosion proof motor and a blower to remove the source of ignition - Secure safety by featuring steel pipes for pressure services - Send an alarm signal when recovered oil reaches a certain level - Send an alarm signal by incorporating temperature and a pressure sensor into each part of two refrigerators - Send a discernible signal by installing an alarming boozer or warning light - Feature an emergency switch designed to block electric supply when problem occurs 4. Application - Recovery of oil steam |
Equipment |
| 679 | Gas Turbine Flow Meter GT | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline - This Gas Turbine Flow Meter is very simple in structure. small-sized and lightweight so that its handling is convenient. As for measurement target fluids. low viscosity liquids and any gas without impurities can be measured. so this flow meter is applied to a variety of industries including petro chemistry. chemistry. environment. food and beverage and so on. 2. Introduction 3. Characteristics - The Gas Turbine Flow Meter Model GT Series is a flow meter which is an only and single structure in which a rotor and a bearing of a flow machine are integrated into one body and especially. its tungsten carbide V Cup bearing structure measures the flow rate of gas with exceptional performance. - The size ranges from 3/4 to 2. - The measurement range is from 0.22 - 2.2 M3/H to 33 - 330 M3/H. - This product has a rotor structure with various sizes. - This product has a tungsten carbide bearing structure. 4. Application - Gas Turbine Flow Meter GT |
Equipment | |
| 680 | Gas Ventilation | WE32A, WE32B | Corporation WIN | http://www.corpwin.com | 1. Outline Explosion venting provides over pressure protection from industrial explosion danger by providing a planned pathway for the expanding gases to escape. 2. Introduction Explosion venting is acceptable when the equipment to be protected is located outdoors or near an out side wall. The vent opening must be sited to allow the expanding gases to be vented at a rapid rate so as to limit the internal development of pressure. 3. Characteristics - Model WE32 . Vent bursting pressure verified by destructive testing of each lot manufactured. . Wide range of vent types available to meet user specific application. 4. Application Over pressure protection from industrial explosion danger | Instrument & Chemicals |
| 681 | gaseous streams flue-gases | PTR-TOF-MS | APM Engineering | http://www.apm.co.kr | 1. Outline - Continuously and automatically measuring VOCs without pre-treatment by the maximum 10ppt 2. Introduction 3. Characteristics - Measuring the concentration of organic gases in the air and indoor air - Investigating the odor emission source of the air - Measuring the VOCs flux of the air - Measuring the concentration of perfume such as foods and spices - Real time monitoring VOCs - Measuring the dioxin discharged from incinerator and production process - Measuring the gas produced by the decay of animals and plants - Measuring the harmful materials produced by smoking 4. Application - Sampling TSP. PM10. PM2.5 and PM1.0 in the air and indoor air - Measuring the mass and concentration of dust in the air and indoor air - Analyzing the dust containing organic and inorganic materials |
Equipment |
| 682 | GASHOLDER | GASHOLDER | ATE Co., Ltd. | http://www.atecorp.co.kr/ | 1. Outline - This BIODOMETM double membrane gas holder is a permanent structure that is supported by air pressure which is specially designed to store bio gas. In general. a gas holder is installed in wastewater treatment plants that uses digested organic matters as an energy source to generate biogas. facilities for biogas. facilities for disposing farm produces. landfills and combined heat & power plants. 2. Introduction 3. Characteristics - External membrane ㆍYield point :9.000N/5cm(1.011 ibf/2inches) ㆍMethane penetration ratio of 165ml/m2/day/bar or less ㆍEasy to replace - Internal membrane ㆍYield point: 9.000N/5cm(1.011 ibf/2inches) ㆍMethane penetration ratio of 165ml/m2/day/bar or less 4. Application - Storage of bio gas |
Technology & Process |
| 683 | General Centrifugal Separator | Jireh Ecotech Co., Ltd. | http://www.jireheco.co.kr | 1. Outline This general centrifugal separator can treat the particles of 1㎛-10㎜ and treat highly concentrated solution of 0.1%~50%. 2. Introduction 3. Characteristics This centrifugal separator can treat rapidly occurred various and many solids continuously in a small working space without using a screen. a filter cloth and washing water. Even though reclaiming rate of solid is high. water contained percentage is low and concentration of the inserted and treated solids are changeable. this machine can cover the change enough. 4. Application - Environment: Livestock’s excretion. livestock farming sewage. pre-treatment of food. etc. - Chemistry: Synthetic resin. fertilizer. mineral chemistry. soda. etc. - Petrochemistry (oil): Waste oil. lubricant. cutting oil. fish oil. etc. - Foodstuff: Alcohol. fruit juice. starch. farina. etc. - Industrial Sewage: Impinging water. painting. dyeing. plating. papering. power plant. iron foundry. etc. - Civil Engineering: Mine. excavation. Etc. |
Equipment | |
| 684 | General Turbine Flow Meter | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline - A turbine flow meter is very simple in structure. small-sized and light so that it is convenient for handling. As for measurement target fluids. a low viscosity liquid and any gas without impurities can be measured. so this flow meter is applied to a variety of industries including petro chemistry. chemistry. environment. food and beverage and so on. 2. Introduction 3. Characteristics - The Micro Turbine Vision 2008 Flow Meter is small and lightweight and so it is proper for measuring a small amount of fluids. - The largest advantage is high quality but cheap price. - Fluid range: 0.25 to 35 L/Min - Temperature range: -20 to 100℃ - Pressure range: 25 barg. - These sensors can be used in a temperature range of 450℉~450 ℉. 4. Application - Turbine Pickup Sensor |
Equipment | |
| 685 | Genite system | Gentro Co., Ltd. | http://www.gentro.co.kr/ | 1. Outline - GENITE SYSTEM is highly efficient and economical pond and lake purification system by using the principles of nature purification and photocatalyst technology. - IT purifies water. which is polluted by organic compounds and nutritive salts in the ponds and lakes in a short time by using high concentration apparatus for dissolving oxygen. photocatalyst devices and UV. - IT also can get rid of offensive odor. tidal current and turbidity by maximizing self-purification function. 2. Introduction 3. Characteristics ① Maximize safety - Maximize process efficiency - Enhance physical. chemical and biological safety of photocatalyst and active oxygen ② Various application effect - Eliminates organic matter and nutritive salts - Removes offensive odor - Sterilization and antibacterial performance ③ Great effects - Strong UV wavelength occurs - Oxidation and reduction occur at the same time → enhance the efficiency of treatment and extends the application range ④ Improve economic efficiency - Minimize initial investment and management expense - Maximize durability by continuous photocatalyst response - Maximize UV replacement cycle - Improve maintenance effect 4. Application - Purification of rivers and lakes |
Technology & Process | |
| 686 | Geo Fiber System | Geo Fiber System | Ilsong Co., Ltd. | http://www.ilsong.co.kr | 1. Outline This Geo Fiber System is a combination of three construction works: Geo Fiber foundation. Continuous long-fiber earth reinforcement and revegetation works. At a time when a new revegetation technology for slope is required. it is an environment friendly method meeting the demand of the time. 2. Introduction 3. Characteristics - Continuous fiber reinforced earth shows almost equal water permeability with pre-reinforced sand as the continuous fiber accounts only for one percent of the space in the earth. - Continuous fiber reinforced earth shows bigger elastic deformation than sand. It proves that Geo Fiber System can adjust its deformation when partial contortion occurs by unequal settlement. - In the continuous fiber reinforced earth. the fiber and sand particles are combined through friction and the fiber keeps sand particles from relative movement. When deformed by force. the continuous fiber serves as a tensile stiffener. and the tension generates binding force. 4. Application - Securing effective soil depth - Early forestation - Building foundation for vegetation |
Technology & Process |
| 687 | HDPE Sheet for Landfill site or Reservoir | HDPE Sheet for Landfill site or Reservoir | Contech Coporation | http://www.contech.co.kr | 1. Outline Using the EPDM (Ethylene Propylene Diene Monomer) Sheet. the reservoir and the artificial pond of golf course are constructed. 2. Introduction 1) Material: HDPE (High Density PolyEthylene). and EPDM synthetic polymer rubber sheet 2) Types: Diverse supplies made in Japan. USA. or Korea are supplied. - Golf course pond constructed with waterproof sheet <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=180-2.jpg></center> 3. Characteristics 1) Tensile strength and elongation are super. and has durability to UV ray. 2) Adhesion power is excellent by the joining job of glue type. and workability to structure is nice. 3) The repair is simple at the leakage. 4. Application 1) Waterproof treatment site of construction site 2) Reservoir for agricultural and industrial water 3) Artificial lake. reservoir and irrigation waterway in golf courses 4) Factorial wastewater treatment plant | Technology & Process |
| 688 | Geosynthetic Clay Liners (GCLs) | Geosynthetic Clay Liners (GCLs) | CETCO Korea Ltd. | http://www.cetcokorea.co.kr | 1. Outline - The CETCO’s Geosynthetic Clay Liners (GCLs) for environmental area pollution control facility are the crystal of continuous quality development and experience by the CETCO. - To enhance the applicability and the effectiveness for each field site the BentoMAT and ClayMax GCLs of CETCO are manufactured based on the precise technological foundation considering detailed field adaptability after field teat. thus can be selected based on the characteristics of the application field. 2. Introduction - Manufactured by the homogeneous packing of the VolClay sodium bentonite between the geotextiles of the polypropylene textile and the non woven textile. and than reinforced by the needle punching to keep the best watertight in diverse field conditions. - By the needle punched connection fiber the BentoMat ST has the higher tensile strength to keep the low water permeability stablely even under the worst field condition. - The top layer of the BentoMat ST is made of the textile to maximize the intimacy of contacting surface with the synthetic sheet in the double watertight system. 3. Characteristics 1) Structure of the CETCO GCLs - Composition of GCLS The CETCO’s Geosynthetic Clay Liners (GCLs) are composed of the combinations of the contaminant resistant VolClay sodium bentonite that is environment-friendly and shows low water permeability and of the high strength Polypropylene Geotextiles. - Manufacturing method The CETCO’s Geosynthetic Clay Liners (GCLs) are manufactured by the homogeneous packing of the VolClay sodium bentonite in uniform thickness between the woven textile and the non woven textile. and then reinforced by the needle punching to eliminate the fluidization or loss of bentonite in the state of dry or swelling. or by the glue joining method. 2) The Characteristics of the CETCO GCLs - Excellent impermeability Though the GCLs have the thin thickness of less than 1 cm. they have the high impermeability even in the low confined pressures. The water conductivity of GCLs is generally in the range of 1X10-9 cm/sec under 5 psi (0.35 kg/cm2) confining pressure. which is the higher impermeability than that of the 100 cm thick clay layer having 1X10-7 cm/sec water conductivity. - Easy workability The GCLs are manufactured in the roll type for the easy handling. storage and construction. and during the installation of continuous watertight layers no additional equipment for joining is necessary. - The Self-Healing capability The unique swelling power of the VolClay sodium bentonite upon hydration can generate the self repair capability under the sudden damage in watertight layer. - Excellent applicability The GCLs have the flexibility. durability and tolerance to coldness thus no loss in the impermeability by the natural environmental factors of differential settlement. freezing and thaw. etc. Furthermore the GCLs with geotextile have super tensile strength inside. thus can keep the stability even in the fast slope. - Increase in the air volume of landfill The GCLs can save the air space for waste landfilling by more than 10% compared to the existing Compacted Clay Liner. 4. Application - Waste landfill liners. the secondary containment in chemicals storage tank facility. surface impoundment. the landfill covers after closure. waterways development. mines. artificial wetland construction. etc. | Instrument & Chemicals |
| 689 | Geothermal Heating & Cooling System | Geothermal Heating & Cooling System | ES ENERGY Co., Ltd. | http://eses.co.kr/ | 1. Outline - This geothermal heat pump maintains ground heat to keep temperature constant throughout the year and thus is hailed as one of the most stable energy sources. The geothermal heat pump fueled by the ground heat emits indoor heat into the low-temperature ground while a heating & cooling system is in operation. When the heating system is in operation. the geothermal heat absorbs high ground heat to keep indoor temperature higher. In this way. the system provides a very cost-effective and stable solution. 2. Introduction 3. Characteristics - Use the refrigerant to absorb heat and emit it from a heat sink - Calories used by a heat sink = Calories absorbed by a heat source + Electric consumption by a compressor - COPh = Used calories / electric consumption by a compressor (heating 3.5 /cooling 4.5) - COPc = Generated calories /electric consumption by a compressor 4. Application - Heating & cooling system |
Technology & Process |
| 690 | GFF Filter | GFF-7500N | Sseng Co., Ltd. | http://www.ssecor.com | 1. Outline - A filter layer of 2 to 3 cm is formed through tensing and pressurizing the non-braided fiber bundles on the surface of the rectangular type perforated plate fixed with the bottom. Then the filtration is started with the gravity force less than about 30centimeters of water head. - The backwashing procedure is beginning when the water level is reached at given height. The backwashing is performed by relaxing the fiber bundles and spraying the backwash air to form intensive upward stream which can give a strong shear force to move the fibers. - This gravity type fiber filter equipment is called as GFF (Gravity Flow Fiber) FILTER. When more than two of this kind filters are equipped in a same basin the backwash pumps are not required. since the backwash water is supplied automatically by upward stream coming from neighbor filters. So. it was called PUMPLESS FILTER as well. 2. Introduction 3. Characteristics - No filtration pump required: Pressurizing the filtering materials on the multi-porous plate up to 2 - 3cm of the thickness and filtrating the water by gravity with 30cm of the water head - No pumps for the backwash required: The water level is raised when supplying the backwash air and then the backwash water to be filtrated is supplied automatically by the overflow - Minimizing the filtration equipment size: The filtration layer for the same size space is larger than cylindrical or disc type filters since the shape of filtering plate is rectangular. - High quality of the filtered water: Non braid type movable fiber filter layer thicker than the braid type fixed fiber filter has the depths filtration effects. - High efficiency of the backwash: Salts adhesion and bio film propagation are prevented from the intensive movable backwash possible with the non braid type movable fiber filter layer 4. Application - Discharge with enhanced quality of effluent. Filtering recycling heavy water - Filtration of drinking water at the drinking water companies. water purification plant and etc. - Pre-treatment Filtration including advanced treatment of membrane separation - Clean Maintenance Filtration of water like swimming fool. aquarium and etc. - Green/Red Tide Filtration for the Water Collection Reservoir. Fish Farms and etc. - Filtration of cooling water recirculation. water for agricultural / industrial uses |
Equipment |
| 691 | GFF Filter. | GFF Filter. | SSeng Co., Ltd. | http://www.ssecor.com | 1. Outline - This is a gravity fiber filter called “FDD filter.” The filters go through gravitation filtering by a 30 or something water level difference by extending a bottom-tied unwoven fiber bundle. The fiber bundle is sealed with the perforated sheets. The fiber is compressed until the thickness of the filter layer becomes 2-3cm and goes through gravity filtering. After reaching the previously set water level. it releases the filter and sprays the backwashing air for making intensively rising water stream. This stream makes the fiber move and generates a strong shearforce which enables backwashing. If more than one filter is installed. rising water stream provides backwashing water. so the backwashing pump is unnecessary. 2. Introduction 3. Character - No filtering pump:Gravity filtering by compressing the filters. each being 2~3cm in thickness to the perforated sheet & using a 30cm water lever difference. - No backwashing pump: When releasing backwashing air. filtered tank water is automatically supplied by the overflowsbecause of water level rising. - Minimize filters: Rectangle-shaped filters achieve broader filter layers per space than using cylinder/cylinder-shaped filters. - High efficiency in filtered water quality: Flexible unwoven filter achieves a deep filtering effect by the thicker filter layers than inflexible woven filters. - High efficient backwashing: Enables intensive flexible backwashing of the flexible unwoven filter layer. - Possible repairing during operation: When attaching or detaching the unit filter. the backdraft prevention system is designed to prevents being mixed into the raw water. 4. Application - Improvement of released water quality. mineral water manufacturers and advanced water treatment facilities. and water intake stations. |
Equipment |
| 692 | GHG-analyzer | G1301 | KNJ Engineering Co., Ltd. | http://www.knj-eng.co.kr | 1. Outline - Cavity Ring Down Spectroscopy. a latest laser analysis technology is applied to GHG analyzers. GHG analyzers can measure CO2. CH4 and H2O in the atmosphere at the same time. 2. Introduction 3. Characteristics - A Cavity Ring Down Spectroscopy (WS-CRDS). a latest laser analysis technology is applied. - Measuring CO2. CH4. and H2O in the atmosphere at the same time is possible. - Long correction cycle(3~6months). - Used as a substitution for NDIR CO2 greenhouse gas analysis by the Korea Meteorological Administration. - An analysis drift during measurement and correction is very small. - Analysis of N2O and isotope(observation of nitrification/denitrification process in soil). - Observation of N2O in the sites is possible(use of emissions of flux) 4. Application - Greenhouse gas analysis |
Equipment |
| 693 | GLI P53/Differential pH Sensor | GLI P53/Differential pH Sensor | Yu IL Lab Tech Co., Ltd | http://www.yuillab.com | 1. Outline This GLIs P53 pH/ORP Analyzer is a full-featured. easy-to-use instrument. This versatile analyzer accepts GLI Differential sensors. conventional combination electrodes. or electrode pairs. The large backlit LCD graphic display shows the measured pH. process temperature. both analog output values. and relay status. The P53 has multiple language capabilities. and exceeds U.S. and European standards for EMI and RFI. 2. Introduction 3. Characteristics - pH/ORP measurement capability - Multiple outputs and relays - Menu-guided operation - Simple interactive diagnostics - Multiple language capability 4. Application - Analysis of Quality of Water for Purification |
Equipment |
| 694 | Globe Photometer | METO-800 | OSANG M&ET CO., LTD | http://osico.co.kr/eng/ | System Composition -PH2000: Measurement of total intensity of radiation -UI2012: AC/DC V. I. W. PF(Power Factor). Hz measurement -METO-8000: Measurement of total intensity of radiation. efficiency for sunlight. color rendering index. color temperature. color distribution chart -DC POWER SUPPLY -AC POWER SUPPLY -FL202 SET -Photomete Probe -Optical Fiber -2M. 0.3M Sphere(Open type. Sliding type choice) Characteristic 1. Measurement DATA: visual inspectioin. all of speed of limit. color temperate color rendering index 2. Real time Monitoring from a process of mass production 3. An uniformity of quality through. all inspection 4. Securement of product's reliability through equal examination by same basis | Equipment |
| 695 | GoBio1001 :400lb 800lb 1200lb | GoBio1001 :400lb 800lb 1200lb | Bio HI-TECH CO., LTD | http://www.biohitechgroup.com/ | Product Description GohBio: This product to ferment completely organic waste in 24 hours by microbe. and to eliminate waste into clean water. Discharged water is purified through water filtering devices. meeting the environmental standard. Thus it is the one stop solution system for organic waste treatment. able to manage directly on the work site. Product Feature gobio1001 400lb (1090X800X1067 . 2.55 Kw) 800lb (1448X1120X1222 . 4.1 Kw) 1200lb (1626X1120X1222 . 4.5 Kw) Product Specification / Models GoBio1001 : 400lb 800lb 1200lb ETL 1200lb CE 1200lb 800lb Application -Organic Waste Decomposer This is specifically designed for the rapid & safe decomposition of organic food waste including: Food Waste. Sludge. Fish Waste. Vegetables. Meat & Poultry. etc..) This is very useful for Hotel. Condominium. Food Plant. School. Military Unit. Feeding Facility. a Large-sized market. Department store. Prison. Apartment. Food-court. Island Area. etc.. | Equipment |
| 696 | Gravity Filter | Gravity Filter | Daekeum Geowell Co., Ltd. | http://www.geowellwater.com | 1. Outline • This unit is designed for cleansing and filtering contaminated water without operating valves by applying the siphon principle. The time to operate or stop the siphon is determined based on the loss of head. and flow velocity is a very important factor to be considered during design. 2. Introduction 14Biz-45.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-45.JPG'>3. Character • No expense or breakdown because it does not require a large caliber valve or control • Reduces power costs because it does not require backwashing pumps • Easy to operate and maintain because it is not a machine • Flow velocity of backwashing can be controlled by the backwashing water volume controller located at the bottom of the drainage pipe 4. Application • Raw water treatment • Ultrapure water manufacturing • Gravity filtration |
Instrument & Chemicals |
| 697 | Gravity Filter (Twin Cartridge) | GF101 | DongHaeng Co. Ltd | www.dhcompany.com | 1. outline The FreshWater portable gravity filter is a convenient way to enjoy freshly filtered water. Capable of producing up to 50 litres per day of freshly filtered water. our stainless steel gravity filter comes complete with two Sugalite cartridges and requires no plumbing. It is capable of removing 99.99% of all particles larger than 1 micron including dirt. rust. sediment. bacteria and parasites. In addition to pathogenic bacteria. the Sugalite removes organic pollutants. such as agricultural pesticides and herbicides. chlorine. and dissolved heavy metals. such as cadmium. lead. mercury and copper. A gravity filter will also improve the taste of your drinking water and remove odours. 2. characteristics The Sugalite filter is not configured to filter Fluoride or Nitrates. It possible to purchase the Fresh Water Gravity filter with either additional Fluoride or Nitrate filters. although these may not be necessary for most people. Fluoride is added to the water supply by some UK water boards but not all. so we would adivse you contact your local water board who will tell you if fluoride is added. Nitrates are only generallay a concern for those with private water supplies. To add the additional Fluoride or Nitrate filters to the system simply click on the 'Select Option' drop down box above. | Equipment |
| 698 | Gravity press dewatering machine | Gravity press dewatering machine | ENERGOS Co., Ltd. | http://www.energos.co.kr | 1. Outline - The company produces the gravity press dewatering machine(GBP) using gravity dewatering and belt press dewatering. It consists of a SFDF(Single Flocculant Double Flocculation) device and a gravity belt press. 2. Introduction 3. Character - In order to increase dewaterability. sludge is mixed with polymer twice before it is delivered into the horizontal gravity dewatering zone. - Sludge particle becomes a multi porous structure. - As soon as sludge is delivered into a gravity dewatering zone. the free water is deaerated and separated quickly below the porous filter cloth. 4. Application - Gravity press dewatering machine. |
Equipment |
| 699 | ONELINE TECH Co., Ltd. | http://www.onelinetech.com/ | 1. Outline • It is a device to automatically filtrate and backwash contaminated water. • It is called “siphon filter” or “valveless filter” because it applies a siphon operation principle and does not use a valve. • Operation Structure - Raw water enters the filtering room through a raw water distribution tank and is filtered by the sand filtering layer. - Once the filtered water is stored in the collecting room. it flows down through a connecting pipe toward the backwashing water tank. - As the water level in the tank gradually increases and the water reaches the top of the tank. it is discharged through the backwash drainage pipes. - The initially filtered water stays inside and is stored for backwashing and the next one is discharged for use. - As filtration is continued using this method. the filtration resistance is increased and the water level in the backwash drainage pipe is gradually increased. finally reaching the top of the backwash drainage pipe. 2. Introduction 14Biz-41.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-41.JPG'>3. Character • There are no extra costs. breakdown. or operative controls involved because it does not use the large-caliber valve or the controller. • There is no need for a backwash tank or a backwash pump because the backwash water exists and stays inside the filtering device. • There are no power costs because it does not require a pump power motor. • It is easy to operate and maintain because it is not a mechanical-type device. • It does not generate bubbles in the sand layer as the filtering resistance and the water level reaches a high level because it filters with a constant rate. 4. Application • All units that can use a filter • Filtration of the water treated in the coagulating and precipitating device • Low water turbidity • Removal of small volume of iron and manganese • Filtration of cooling tower water |
Equipment | ||
| 700 | Green Algae Cleaning Robot | Green Algae Cleaning Robot | Daesin Entech Co, Ltd. | http://www.ds-entech.co.kr | 1. Outline - Green algae cleaning robot automatically removes green algae that occur in waterway of sediment basin. It runs on auto-storage battery to perform automatic cleaning with rotary brush. 2. Introduction 3. Character - No need for external power supply due to auto storage battery. - Auto-modify contact area of rotary brush depending on width and depth of waterways. - First domestically produced storage battery powered robot. enabling all systems to automatically operate. - Automatically adjust considering shape of waterway and abrasion of brush. - Set rotary brush in motion and control driving speed with wireless remote control. 4. Application - Green algae removal in sewage plant. |
Equipment |
| 701 | Green-Ceramics | Gentro Co., Ltd. | http://www.gentro.co.kr/ | 1. Outline Green-ceramics is mostly consist of inorganic substances and premixed with special additive. It is harmless to human bodies. environment-friendly and resistant to heat. It also is easy to install and new environment-friendly floor panel by using ion combination process. It is used for parking lots. factory. distribution center. public facilities. store. restaurant. office and laboratory because it is resistant to pollution. impacts. and abrasion. 2. Introduction 3. Characteristics - It doesn’t have harmful substances or endocrine disrupting chemicals. When it burns. it doesn’t produce harmful gas. - It. as incombustible product. minimizes the possibility of fire. - It is breathable that rarely separates the panel with the floor. - It is economical because it is resistant to abrasion. impacts and durable. - It is resistant to pollution and easy to restore. - Reduce noise while driving (resisting noise of tire) - Have a variety of colors over 300 kinds. 4. Application - It is used for parking lots. factory. distribution center. public facilities. store. restaurant. office and laboratory. |
Energy | |
| 702 | Greenhouse gas flux analyzer | G2301-f | KNJ Engineering Co., Ltd. | http://www.knj-eng.co.kr | 1. Outline - Cavity Ring Down Spectroscopy. a latest laser analysis technology is applied to greenhouse gas flux analyzers. The analyzer can measure flux. CO2. CH4. H2O in the air at the same time without being influenced by changes in temperature. pressure and humidity. 2. Introduction 3. Characteristics - Cavity Ring Down Spectroscopy(WS-CRDS). a latest laser analysis technology is applied . - Installing in the field is possible(without being influenced by changes in temperature. pressure and humidity ) / low power consumption - Measuring flux. CO2. CH4. H2O in the air at the same time is possible. - Long correction cycle (3~6 months). - Quick analysis cycle of 10Hz - Flux analysis - Various measuring modes - Unlike Open path / Close path NDIR / Open path WMS and ICOS. a correction cycle is long and a drift is very good. - Deviation by changes in temperature is very small –very accurate analysis in the field! Drift over Temperature(CO2) = +/- 0.008ppm/degC Drift over Temperature(CH4) = +/- 0.00005ppm/degC 4. Application - Greenhouse gas analysis |
Equipment |
| 703 | Greenhouse gas Optimized Management System | GOMS system | ECOSENSE Inc. | http://www.ecosense.co.kr | 1. Outline - The conventional method to reduce the greenhouse gas of local government is mostly lack of the systematic and scientific analysis. Therefore. the efficiency of setting target and achieving target is reduced by half due to the lack of the systematic investigation. DB. and analyzing system. - To solve these problems. it creates the system available to manage effectively by computerizing the data collection and analysis system from the inventory building to the monitoring 2. Introduction 3. Characteristics - Building the measuring system of high reliability suitable to the local government using greenhouse gas measuring method certified by overseas and domestic countries. - Creating the predicting system of high reliability through predicting model and factor considered the features of local government. - Evaluating the potential reduction for each field applying the potential reduction evaluating model developed by EcoSense Inc. and building the target-setting system. - Building the result management system by monitoring the reduction projects to achieve the reduction target. 4. Application - Establishing the energy-saving policy and strategy through analyzing the emission pattern - Raising the dealing ability for Post-Kyoto by the local government - Working as the positive factor to induce the international event - Prevention of double investment. improving the ability to perform the effective policy for the climate change through the update of GHG inventory |
Technology & Process |
| 704 | GreenLine MK2 | GreenLine MK2 | SEIL Int’l Trading Co | http://eurotron.co.kr | 1. Outline - GreenLine MK2 is the first gas analyzer officially approved from the government and is also the Ministry of Environment- approved 1st product in compliance with the standard for 4 items such as O2. CO. NOx and SO2. The analyzed results for this product is accepted as official data. The product embodies the second water pump which emits water automatically. a preprocessing system. and a print function. 2. Introduction 3. Character - Simple manipulation (automatic zero degree correction. calculation setting program). - Measuring range setting available (high density. low density). - Built-in of the system which automatically emit gas water and condensed water. - Ministry of Environment-approved type . 4. Application - Gas analyzer |
Instrument & Chemicals |
| 705 | GREEN-SBR Process | GREEN-SBR Process | GET Co., Ltd. | http://www.get21.kr | 1. Outline This GREEN-SBR Process is an advanced sewage treatment method using a sequencing batch. which employs a method of repeating reaction between sewage and microorganisms. precipitation. drainage of treated water and a sludge discharge process and then treating sewage by equipping a single reactor with functions of a reactor and a final sedimentation tank. 2. Introduction 3. Characteristics - Short residence time - Simultaneous removal of nitrogen and phosphorus in a single reactor - Securing treatment stability in a drop in water temperature in the winter seasons - High resistance to changes in flow rate and water quality - Excellence of a fiber carrier - UV disinfection 4. Application - Advanced Sewage Treatment |
Technology & Process |
| 706 | Grinder Pump | Grinder Pump | JI CHUN PUMP INDUSTRY CO., LTD. | http://www.jcpump.co.kr/ | 1. Outline - Grinder Pump. 2. Introduction 3. Character - Increased durability and lifespan due to the adoption of a four-pole motor. - Primary cutting by a grinding impeller made from chrome alloy steel. 4. Application - Mediation pumping station in a rural sewage treatment facility. - Sludge transfer pump in a primary settling chamber. - Sludge transfer pump installed in a settling chamber. - Raw water tank pump in a sewage treatment plant. - Flow equalization tank pump for sewage and wastewater. |
Equipment |
| 707 | YT Co., Ltd. | http://www.envi2000.co.kr/ | 1. Outline • Sedimentation and deposition in settling basin cause a reduction in the cross-sectional area of flow resulting in a high flow velocity and low sinking efficiency. Grit Hoist. a type of grit remover. prevents this problem. • When selecting a Grit Hoist. the grit-removal capacity of the Grit Hoist as well as abrasion and corrosion resistance should be taken into account. • A circulating V-bucket is attached to both sides of a caterpillar chain to continuously extract the grit and place it out onto the conveyor above ground. 2. Introduction 14Biz-31.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-31.JPG'>3. Character • Able to function as both a scraper and lifter • Simple structure • Easy to maintain and control. • As it is a fixed. stationary type. the equipment can be covered to block the odor of the settling basin. • Provides a range of width and length adjustments for the installed water channel 4. Application • Grit removal • Extraction and lifting of accumulated grit • Grit deposition prevention |
Eco-Friendly Products | ||
| 708 | Grit Remover | Double Chain V-Bucket Type | HKET.CO.,LTD. | http://www.hkmic.co.kr | 1. Outline The grit remover installed on grit chamber separates grit from sewage to prevent damage to mechanical equipment from abrasion. build up of grit particles or heavy sludge deposits in stream line. and to reduce the frequency of excessive accumulation of grit. 2. Introduction The V-Buckets attached to the endless double link chain running in guide rail removes the settled and accumulated grit from the bottom of grit chamber. Fig. 1. Structure of Grit Remover |
Equipment |
| 709 | Grit Remover | Pretreatment package with spiral flow grit remover | TASET Inc. | http://www.taset.com | 1. Outline This pretreatment package is composed of mechanical fine screen. compactor. spiral flow grit remover and sand washing conveyor. This package is installed at front stage of treatment plant. to remove big grit in the size of more than 3mm and to separate clean sand from raw water. letting light weight organic component pass it through to the next treatment stage. It has great advantage to reduce total load of treatment plant with more than 90% of sand removal efficiency. 2. Introduction 2-1. Principle of Pretreatment package with spiral flow grit remover - Installed at front part of treatment plant to screen fine grit that prevents pumps and piping from clogging. - Fine grit of raw water is separated by front screen. - Small grit passed through fine screen is divided into light organic component and heavy sand by spiral flow grit remover. Heavy sand settles down. light small organic component rises to the surface and passes through. - Settled heavy sand is lifted to the sand separator by air lift device. - Finally lifted sand is cleaned by grit washing separator. and discharged. 2-2. Schematic diagram <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000102_1.jpg></center> 3. Characteristics - Simple package with space saving - Efficient grit washing to get clean sand - Efficient sand lifting with tornado block - Simple installation - Easy maintenance <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000102_2.jpg></center> <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000102_3.jpg></center> 4. Application - Total or partial package can be applied. depending on job site condition. - Waste water treatment plant - Sewage water treatment plant - Water treatment plant | Equipment |
| 710 | Grit Removal Equipment | Grit Removal Equipment | Jeil Machine Co., Ltd. | http://www.jim21.co.kr | 1. Outline • It is a machine used to separate. collect. and remove the grit mixed in the water flowing inside. This machine does these functions by minimizing the vortex and maximizing its containment period. 2. Introduction 14Biz-14.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-14.JPG'>3. Character • It is not necessary to install or have a grit chamber for cities’ sewage treatment plants or a wastewater treatment plant. • Equipment or facilities installed for grit chambers are not necessary. • The washing water of vehicles at construction sites can be reused. • The grit from dredging work can be reused. • It has a compact design. • It has a low installation and operation cost. • It has a treatment capacity of 10–100 m3/hr. • This machine can be custom-made to suit the site. 4. Application • Separation and removal of the grit that settles into purification plants. sewerage plants. and wastewater treatment plants • Separation and removal of the grit in car washes • Separation and removal of the grit caused by ground water development |
Eco-Friendly Products |
| 711 | Ground Source Heat Pump | Ground Source Heat Pump | Daesung Heat Pump Co., Ltd. | http://www.dsheatpump.co.kr/ | 1. Outline - The heat pump is the proven technology that works based on mechanical principles as similar to refrigerators and air conditioners and is the device to transport energy to any place requiring energy through the heat gained from the air. water and geothermal. As shown above. the heat pump absorbs heat gained from external heat sources (groundwater heat) based on a circulation method involving refrigerant heat with the use of condensation and evaporation heat. In doing so. the ground source heat pump fuels cooling and heating as a highly efficient energy system that can produce 3 to 5kW calories using electricity of 1KW. 2. Introduction 3. Characteristics - Reliability and stability - Long life span - Less noise - Low maintenance cost - No need for boilers and fuel tanks - Environment-friendly facility system 4. Application - Cattle pen - Greenhouse agricultural produce - Horticultural farm |
Equipment |
| 712 | Groundwater and Industrial Water Treatment System | Groundwater and Industrial Water Treatment System | Wide Ocean Water Solution | http://www. tywater.kr | 1. Outline • A multimedia filter and an industrial water treatment system customized through activated carbon filter. iron. manganese removal. hard water softening. precision filtration. and ultra filtration. 2. Introduction 3. Character • Activated Carbon Filter - Device to remove aromatic substances and residual chlorine in the water using characteristic adhesion of activated carbon. - Activated carbon is a filter media manufactured by an advanced activation process using carbonic materials and used in all kinds of industrial and environmental fields widely. • Iron and Manganese Removal System - The groundwater. which contains iron and manganese. is generally colorless and transparent in the early stage of pumping. but it oxidizes and creates light brown and black hydroxide as time passes. Therefore. there is a severe obstacle when it is used as industrial water and drinking water. - There are diverse traditional treatment methods. However. Feroxer system is a catalytic oxidation filtration method with easy handling and excellent treatment efficiency among those methods. • Hard Water Softening - It serves as a device to pass raw water (hard water) through cation exchange resin layer to soften hard water. - It removes many obstacles caused by scale by removing calcium and magnesium ions in the water using ion-exchange reaction. - Essential equipment when groundwater with high hardness is used as boiler water and other industrial water. - When ion-exchange ability of cation exchange resin is eliminated. it is recycled with 10% chloride water and can maintain the function continuously. • Precision Filtration - From a method that uses media and general filtration concept. the use of precision filtration is similar. However. there are some structural differences in actual utilization. - When contaminants are captured or adsorbed in a media layer while feed water is passing through a media layer. a device using media discharges captive contaminants to the outside through backwash process to revert and maintain the function. - A cartridge-type filter manufactured with porous synthetic fibers is installed in a vessel of precision filtration to capture contaminants when feed water is passing through a filter layer from the outside to inside. Precision filtration exchanges and uses a filter when the detainment amount is full. 14Biz-113.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-113.JPG'>• Ultra Filtration - It is a system that uses the ultrafiltration membrane porous materials. such as polyethersulfone. etc. - Separate and remove high molecule organic matters. colloids. particles. etc. - Excellent effect of removing particles in manufacturing deionized. 4. Application • Water purification and waste water treatment facilities (adsorptive removal of taste. odor. organic material. cod. bod. abs. thm. residual chlorine. chromaticity. agricultural pesticides. etc.) • Preprocessing of deionized system (reverse osmosis system and ion exchange system. etc.). • Soft drink. alcoholic beverage. and drinking water industry • Sugar manufacture and food industry • Bleaching. deodorization. and colloid elimination in the dye industry • Petrochemistry and alcohol industry • Removing Deodorization. bleaching. refinement. and elimination of colloid and foaming substance of dry cleaning solvent. • Metalworking industry. plating solution refinement. and jewelry recovery. • Pharmaceutical Industry: intermediate refinement. side reaction prevention. and elimination of colloid and pyrogen. |
Equipment |
| 713 | Hybrid PRB System for Removing Complex Contaminants | Hybrid PBR Process | En3 Co., Ltd. | http://en3.co.kr | 1. Outline This remediation system is hybrid permeable reactive barriers (PRB). minimizing the impact of contaminated groundwater on the down streams 2. Introduction - Process 1) In order to develop hybrid PRB for treating groundwater polluted by various organic compound. reaction mediums were developed such as steel-making slag reformed by Fe(II) PRB(Fe(II)). biological PRB (sulfur and limestone mediums). and sorbing PRB(black shale). 2) To find out optimum operation condition and removal rate. batch. column. pilot tests were carried out. 3. Characteristics - Removal was not successful at the upper part of sampling port. for nitrate nitrogen is removed at anaerobic condition. - The lower part of sampling port showed high removal rate. - The concentration of nitrate nitrogen dropped to 10 mg/L or below as it passed biological PRB but went up as it passed sand layer. - The concentration was reduced a bit as nitrogen passed sorbing PRB but increased again as it passed sand layer. - Though the concentration of Cr(VI) was once 0.2 mg/L. mostly the concentration was 0.05 mg/L. showing high removal rate. 4. Application Restoration of contaminated underground water layer | Technology & Process |
| 714 | In-Situ Bioremediation Process in a Nitrate Contaminated Groundwater | In-Situ Bioremediation Process in a Nitrate Contaminated Groundwater | Woosong University | http://www.woosong.ac.kr/wwwhome/index.jsp | 1. Outline - Single Well Push-Pull test to examine the condition of actual work-site. - Well to Well Drift Test to develop removal method of nitrate nitrogen in groundwater. 2. Introduction - Push-pull Test is a test for determination of characteristics of groundwater and increase of microorganism activities. - Well to Well Drift Test is a treatment process for the removal of nitrate nitrogen in polluted groundwater. 3. Characteristics 3-1. Nominating the Electron Donor - As a result of Microcosm Screen Test for a bioremediation. heterotrophic dinitrification rate shows the higher efficiency in the order of fumarate. formate and lactate. ethanol. propionate. methanol. and acetate. with fumarate being the most efficient 3-2. Push-pull Test on Site - Push-pull Test can be observed that large amount of fumarate and nitrate are being reduced from the Activity Test. - As an evidence of denitrification. the nitrate concentration. a middle by-product. is increased by more than ten times of its original amount. - CO2 is increased by approximately four times its original amount. - Removal rate of nitrate and fumarate is each 0.37 and 0.36 mmol/ℓ/hr. - Through the Push-pull Test. the important numerical values for the designing of groundwater denitrification in aquifer polluted by nitrate can be gained. for the quick design. with low cost. |
Technology & Process |
| 715 | GSC ECOFILTER | GSC ECOFILTER | GENERAL SYSTEM COMPANY., LTD | Product Description ECOFILTER is an ultra high performance air purifying filter with specialized structure that cannot be found in any others in the market. Structured with normal temperature activated oxidation catalyst. porous activated carbon pellet and Nano-Silver coating. ECOFILTER is a multifunctional filter which satisfies high level of dust filtering. deodorization. nitrogen oxide reduction. harmful gas elimination and antifungal performance. Product Feature 1)Effectively removes dust. Nox. harmful gas. odor. fungous. and etc. with a single filter with 4 layers (dust filter + Catalyst Filter + Honey-comb type activated carbon + Nano Silver coating) 2)Efficiently absorbs polluted substances with high performance porous activated carbon pellet 3)Nano-Silver coated for powerful deodorization and antifungal action (Patented) 4)Reducing harmful substances by using normal temperature activated oxidation catalyst Product Specification / Models Various types available depending on the purpose. Standard: For vehicle air conditioning 267(mm) x 233.7(mm) x 40t (vary by vehicle models ) For B/D. Industrial plants air conditioning 544(mm) x 594(mm) x 44t Application 1.Air conditioning/purification for Buildings. Industrial plants. Chemical plants. and etc. 2.Air conditioning/purification for Apartments. Public facilities. Education facilities. Public transportation. and etc. 3.Vehicles (Cabin Air conditioning Filter) | Eco-Friendly Products | |
| 716 | GT Combustor Parts | Sung-il Turbine | sungiltbn.com | Based on accumulated technical know-how and experiences. Sung-il Turbine produces high temperature components for gas turbine with all of our hearts by the technical capacity succeeded in localization development and commercialization of combustion chamber and turbine components. Component Name / GT Model Hot Gas Casing / GT11NM Inner Liner / GT11NM Shielding Cone / GT11NM Support Cylinder / GT11NM Burner / GT11NM Transition Piece / 7FA+e Combustion Liner / 7FA+e Cap Assembly / 7FA+e EV/SEV LINER / GT24 SEV Burner / GT24 SEV Lance(Head Part) / GT24 | Equipment | |
| 717 | GT Turbine Parts | GT 11NM | Sung-Il Turbine | sungiltbn.com | Based on accumulated technical know-how and exeriences. Sung-il Turbine produces high temperature components for gas turbine with all of our hearts by the technical capacity succeeded in localization development and commercialization of combustion chamber and turbine components. Component Name /GT Model Blade (1~5 Stage) / GT11NM Vane (1~5 Stage) / GT11NM Heat Shield Segment / GT11NM Shroud Block / 7FA+e CLOTH SEAL / 7FA+e 3rd Vane / W501F Consumables / GT24AB Balancing Weight Tool / GT11N2 | Equipment |
| 718 | H.T.O | H.T.O | J-E TECH Co., Ltd. | http://www.j-etech.co.kr/ | 1. Outline - This H.T.O is a high-efficient VOC removal system through the fusion of RTO and CO. multi-bed waste heat regeneration. and catalytic oxidation system as well as a unique model through the development of a valve box which is essential for the composition of a compact system. 2. Introduction 3. Characteristics - Control of VOC emissions - Improvement of l industrial complexes and for residents’ living environment. - Establishment of an implementation base for regulations of VOC emissions. - 80 % energy saving compared to catalytic incineration. - 40 % energy saving compared to RTO. - Thermal efficiency of more than 95% / VOC removal efficiency of more than 98% - 40% saving of energy consumption compared to RTO. - More than 80% saving of energy consumption compared to catalytic oxidation. 4. Application - Petrochemistry - Automobile Painting - Printing - Food |
Equipment |
| 719 | Handy Air Sampler | HS-7N | Kine Industrial Co., Ltd. | http://www.e-kine.com | 1. Outline - This Air Sampler has a built-in timer that allows automatic sampling and is used to collect noxious gases and dust in the air which are caused by various industrial environments. This Air Sampler has a built-in rechargeable battery that allows convenient sampling on the spot. 2. Introduction 3. Characteristics - HS-7N Handy Air Sampler is compact. lightweight and has a built-in timer so that automatic sampling can be performed any time. In addition. this air sampler has a built-in rechargeable battery so that it can be used conveniently in a site where power supply is difficult. - HS-7N Handy Air Sampler is an air sampler used to collect noxious gases and dust in the air which are caused by various industrial environments. 4. Application - Air Sampler |
Equipment |
| 720 | HANT method | Korea Express Co., Ltd. | http://www.smas.co.kr/ | 1. Outline - HANT is the method that removes organic matters. SS. nitrogen and phosophorous in the waste water. combining organic matters. SS removing technology and modern nitrogen. phosophorous removing system. Consisting of anoxia. aversion. expiratory. drying tank. it has immersing intermediate membrane. so called. biological nitrogen. phosophorous treatment technology. It separates sludge and treated water by suction/filtration method and guarantee great quality of treated water. 2. Introduction 3. Characteristics ① Technological effect - It removes organic matters. nitrogen and phosophorous efficiently compared to other processes. - It reduces outside carbon source compared with low C/N rate. - It can maintain permeate and velocity of moving fluid by using outer skin membrane. - It can control the duration time (SRT > 30days). - It can prohibit the membrane pollution by consistent air cleaning and intermittent operating phase. - It doesn’t need sterilization of final discharge water (removing colon bacterium). - It can separate the fluid by immersion separating membrane. - It can clean in expiration tank directly. ② Economical effect - It can extend the life span of membrane by consistent air cleaning and intermittent operating phase. - It can minimize the installation area. - It can reduce the operation expense. - Simple process. compared to recirculated MBR process. ③ Benefit of HANT process - High concentration microorganisms (resistant to impacts. stable quality of treated water MLSS: 5.000∼12.000㎎/ℓ) great efficiency on treatment and stable quality of treated water - Automatic operation - High concentrated nitrification and denitrificated microorganisms - Maintain great membrane flow rate - Removes colon bacterium - High durability of separating membrane and simple cleaning method - Reduces the amount of sludge (over 50 days SRT. Yobs = under 0.21. 20∼40% of A2/O) - Economical operation and maintenance expense - Sterilization facility is not needed (remove colon bacterium without additional facility) - Initial and final immersion tank. filtration tank facilities are not needed (small installation area. 60∼70% of A2/O) - Stable quality of treated water (treated water qualifies the water quality standard for drinking water except for general bacteria KMnO4) - Even normal people. not professionals can operate this system 4. Application - Organic sewage and wastewater. high concentration wastewater treatment |
Technology & Process | |
| 721 | Harmful Gas Removal Facility | EPiT Co., Ltd. | http://www.epit.co.kr | 1. Outline • A wet scrubber that can treat harmful gas. including dust of gas. causes adhesion or flocculation of particles to separate dust through scrubbing gas using droplets. liquid films. and bubbles. • The major dust collection by droplet removes dust by adhesion by inertial impaction. In the case of particles. it is separated and collected from gas by diffusing and adhering on the surface of the droplet. It removes dust by collecting particles produced by gas humidification. • Carries many types of web scrubbers; although highly efficient. it is difficult to recover by-products and treat wastewater. 2. Introduction 14Biz-131.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-131.JPG'>3. Characteristic • Low maintenance cost • Excellent mechanical safety after installation • Easy feedwater regulation • Freeze protection effect because of installation in the building • Easy inspection of exhaust gas • Simultaneous treatment of harmful gas and dust • Easy treatment of emission caused by high temperature • Small fixed area for treated gas quantity because of its simple structure • Easy and continuous operation • Small effects on temperature and humidity of dust and types of gases 4. Application • Dust-collecting facility |
Equipment | |
| 722 | Harmful substance eliminator | Harmful substance eliminator | E&D Solutions Inc. | http://www.endss.com | 1. Outline The Harmful substance eliminator is an air cleaning system that can prevent respiratory disease caused by sick house syndromes or yellow sand with a function of high performance harmful substance elimination and high efficient dust collection. 2. Feature - 10 -step air cleaning system - High performance. high efficient visible light photo catalyst system. - Elimination of volatile organic compounds (VOCs) (Korea Institute of Construction Materials) - NANO-HEPA filter dust collection - Noise -free BL/DC motor with a strong suction force - Sophisticated high class design - Electromagnetic wave free carbon filter - Chitosan antimicrobial filter - Nano silver sterilization filter 3. Introduction 4. Application - Air cleaning |
Equipment |
| 723 | Hazardous Gas Purification Tower | Packed tower scrubber | Gilgwang Greentech, Co., Ltd. | http://www.gilgwang.co.kr | 1. Outline - A system to purify the contaminated gas by forming liquid membrane or liquid droplet and contacting with dusty gas. which is able to treat dust. odor. and hazardous gas simultaneously. Water is used for cleansing liquid mostly but solvent cn be used according to the solubility o contamination substances 2. Introduction 3. Characteristics - Reduce the operation cost significantly as of low pressure loss - Superior mechanical safety and system stability after installation - Reduce labor cost drastically as of full automatic control and monitoring system - Treatment efficiency is very high. and inspection work of exhaust gas is easy - Easy to adjust water supply. and sampling is easy as the inspection hole height is low - There is no concern of freeze protection as it can be installed inside the building. also easy to prevent freeze even installed outside of building - Very easy for repair and maintenance - The installed location can be moved - Can use long time without rust or corrosion by keeping clean and fine appearance all the time 4. Application - Hazardous gas exhaust facility in chemical plant - Dust & hazardous gas exhaust facility in the steel industry - Process that generated soluble odor - Hazardous gas exhaust facility in pulp and paper manufacturing business - Exhaust gas discharging facility of each line in factory - Hazardous gas exhaust facility of plating factory. incineration. etc. - Various hazardous gas exhaust facility in semiconductor industry |
Equipment |
| 724 | HBC(HANGING BIO-CONTACTOR SYSTEM) | HANGING BIO-CONTACTOR SYSTEM | Seshinclean Co., Ltd. | http://www.seshinclean.co.kr | 1. Outline Supplying the problem in the existing active sludge method. trickling filter process. and fluidized media method. it improves the ability for treating wastewater and breeding attached microorganisms inside the aeration tank with packed bed reactor method. 2. Introduction 3. Characteristics - Improves the computing power with increasing microorganisms in aeration tank - Effective in low concentration wastewater or nitrification basin - Produce small amount of sludge - Great throughput efficiency with various kinds of microorganisms - Economical operation with nitrification and denitrification at the same time - Less man force without maintenance of MLSS and SV - Increase the computing power of precipitation tank without bulking - Intermittent operation 4. Application Recommend the wastewater under COD/BOD11.000PPM |
Technology & Process |
| 725 | HCHO (formaldehyde) meter | FP-30 | KINE INDUSTRY | http://www.e-kine.com | 1. Outline - This HCHO (formaldehyde) meter is to measure fine dust. carbon dioxide. carbon monoxide. HCHO(formaldehyde). VOCs. radon. airborne bacteria. asbestos. and nitrogen dioxide. etc. in houses and public use facilities. The meter is composed of a product that meets the indoor air quality process test method and a portable product. 2. Introduction 3. Characteristics - LCD display which is easy to understand - Self diagnosis function - Storing data until up to 99 measured values is possible - Download with pc is possible - Good accuracy without being influenced by other gases - Formaldehyde meter that meets ‘the indoor air quality control in public use facilities .etc. law act.’ implemented by Korea and WHO. 4. Application - Construction business - Furniture business - Paint business - Environment business |
Equipment |
| 726 | HDS Technique | HDS Technique | DAEWOONG E & S CO., LTD. | http://www.dwens.co.kr | 1. Outline - HDS PROCESS. the technique which this company developed is an high-efficient batch type activated sludge technology. Combined existing SBR and extended aeration into one technology. HDS PROCESS is easy to maintain and excellent in treatment efficiency. 2. Introduction 3. Character - Microorganism process of the HDS PROCES consists of swing reactor(anaerobic/anoxic). HDS main reactor –nitrifying transport reactor and is linked to the micron filtering system to one axis of the HDS main reactor. - When installing an aeration tank. a high-efficient nitrification filter and a micron filter at the front and rear ends of the HDS PROCESS’ microorganism process with them linked each other. the HDS PROCESS is applicable to the high density wastewater whose nitrogen concentration is high and is possible to secure treated water up to the quality level of recycling water. - When applying the unit process of the HDS PROCESS to existing sewage and waste water treatment facilities in a comprehensive way. it is possible to easily improve those sewage and wastewater facilities in an advanced way. 4. Application - Sewage and wastewater treatment |
Equipment |
| 727 | Heat Pump for Industrial Use | Heat Pump for Industrial Use | ES ENERGY Co., Ltd. | http://eses.co.kr/ | 1. Outline - The heat pump for industrial use absorbs heat from waste water. cooling water. emitted air and waste heater to generate cooling and heating energy or hot water necessary for the manufacturing process. The system is designed to use a heat pump to produce heat that can fuel a manufacturing process at low temperature (five to 60 degrees). 2. Introduction 3. Characteristics - Feasible to reduce energy cost by 20 to 50%. - Feasible to recover investment cost in one to two years. - Feasible to increase a unit capacity to 50 to 2000RT. - Feasible to automatically operate the entire system. - Feasible to apply to manufacturing lines requiring the use of hot water. - Feasible to provide through the use of heat wasted through a heating and cooling system. 4. Application - Heating & cooling system |
Equipment |
| 728 | HEAT PUMP TYPE SLUDGE AIR DRYER | Sepa Dryer – HPSD | ReenTec ENG | HEAT PUMP TYPE SLUDGE AIR DRYER(Sepa Dryer – HPSD) It is a eco-friendly water treatment dryer which uses dehumidified air circulation for recycle energy(enthalpy)in air. It is energy-saving model of sludge air dryer with a heat pump type waste heat recovery device which cools down. condenses and re-heats humid air for uniform inflow air temperature in system. FEATURE Air pollution prevention system is unnecessary Semi-permanent refrigerant Dehumidified air circulation Higher energy efficiency than basic model Economical operating cost Reduce CO₂ emissions APPLICATION Wastewater treatment plant. food waste disposal plant Night soil treatment plant. animal manure treatment plant Food factory. meat factory. animal feed factory Paper manufactory. chemical plant Applicable to all of rear dewatering process (Centrifugal hydroextractor. belt press. filter press. screw press& etc.) | Equipment | |
| 729 | Heat recovery system | Waste heat boiler | Hanshin boiler Co., Ltd. | http://www.hanshinboiler.co.kr | 1.Outline MP-T and MP-W waste heat boilers are developed to recycle the wastewater generated in industrial heaters. blast furnaces. and incinerators to thereby produce vapors and hot water. Various kinds of waste heat boilers made by Hanshin play an important role from the viewpoint of the reduction of costs. energy savings. and the improvement of environmental conditions. 2. Introduction 1) MP-T is a waste heat boiler of producing a high pressure of a great quantity of heat gas 2) MP-W is a high performance waste heat boiler using spiral smoke tubes that are the best products in our company 3. Characteristics MP-T - Applicable to treatment of a large quantity of gas - Adequate to very high pressure and large quantity boiler - High viscosity by mechanical dust removal and the possibility of treatment of high humidity gas - Design of boiler adequate to the installation position MP-W - Minimization of dust absorption by use of spiral smoke tubes - Removal of dust and simplicity of repairing by adoption of clean out - Heat transfer coefficient higher than general tubes - Minimization of installation area by compact design - Supply system with stabilized pressure and water level 4. Application <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000269-2.jpg></center> | Equipment |
| 730 | Heavy metal treatment chemical inside wastewater | CR-500 | Chung Rok Chemical Co., Ltd. | http://www.chungrok.co.kr | 1. Outline Shortcoming of salt-coated heavy metal is that it is non-treatable. This is a product to treat such heavy metals. Precipitation matters generated by CR-500 is highly soluble therefore does not become re-soluble but becomes very stable Precipitation matters. 2. Introduction 1) Symptoms a. Exterior: Weak yellow. transparent liquid. b. PH: Strong Alkali 2) Packing measurement: 20 Kg 3. Characteristics 1) React to any heavy metals simultaneously. 2) React to salt coated heavy metals and generates insoluble Precipitation matters. 3) Low occurrence of Sludge. 4) High Solubility of Precipitation matters and does not become re-soluble. 4. Application 1) Various chemical factory wastewaters 2) Coating factory wastewater 3) Electrical component wastewater 4) Other heavy metals containing wastewater | Instrument & Chemicals |
| 731 | Heavy Pressured Membrane Filtration Advanced Water Purification System | Heavy Pressured Membrane Filtration Advanced Water Purification System | Daewoo Construction Co., Ltd. | http://www.dwconst.co.kr | 1. Outline - This is a water purification technology which uses pressured membrane filter system. This is used for the deteriorated water quality. and it has high energy efficiency and maximizes collection rate. By developing the design. construction and operation technologies of this technology. this technology can be used for the remodeling and maintenance of the existing water purification facilities. It can be also used as the core water purification technology for the foreign markets in the future. 2. Introduction 3. Characteristics - This technology monitors the membrane contamination index. injects the coagulation agent according to the empirical formula and through SCM control to reduce the volume of the use of the coagulation agent and saves the energy through the two-stage coagulations. By the combination of the discharge water treatment system. this technology can utilize the resources up to 99% to efficiently use the water resource. For the control of the membrane. stable TMP control is possible through the monitoring of the membrane contamination index and the calculation of the CIP. EFM and optimum cycle term to save the energy. Through the PDT automated control. it can also secure the reliability of the membrane system. 4. Application - This is an improved water purification system which replaces the sand filtering process of the standard water purification system with membrane separation process. |
Technology & Process |
| 732 | Heavy water system | SSF (Super Sand Filter) Process | CHOWOO NATURE Co., Ltd. | http://www.cnature.co.kr | 1. Outline SSF heavy water system has solved a high cost problem and difficulties in maintenance of the existing heavy water systems by using a fluid phase sand filter. and has been developed to widely distribute the heavy water system. It is easy to maintain and manage as being simple in process and using an automatic controller. and is small in a water quality change as carrying out a continuous filter medium cleaning. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000307-1.jpg></center> 2. Introduction In this facility. soluble organic matter remaining in the water is primarily decomposed by microbes attached to Hang Biological contactor (H.B.C) in the flow control aeration tank after which reusing water is produced through the chemical injection type super sand filter (See fig. 1). <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000307-2.jpg></center> <SSF Process> 3. Characteristics (1) It is lower in initial investment costs than other methods. (2) It is easy to operate and manage. and small in a water quality change. (3) It increases a financial effect according to a use amount of heavy water. (4) It has a very economical process by simplifying a construction of the system and applying a highly efficient fluid phase sand filter. (5) It is low in maintenance costs. (6) It is low in a heavy water production cost. and short in investment cost recovery period. 4. Application Heavy water system using wastewater | Technology & Process |
| 733 | Heavy water treatment system | Ultra Clean heavy water treatment system | Prima Ateck Co., Ltd. | http://www.primaind.co.kr | 1.Outline Ultra clean heavy water treatment process is only a process for producing heavy water by using a biological reaction treatment for sufficiently removing organic substances and nutrients and a filtering facility for continuously producing and supplying the heavy water if necessary. When it is considered that unexpected site conditions are changed. especially. it can be operated without any trouble upon application of load of minimum 25% of design capacity. and during a short term. it is possible to operate normally upon application of load of maximum 500 % of design capacity. Therefore. the Ultra clean heavy water treatment system is very practical and versatile. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000228-2.jpg></center> 3. Characteristics 1) Simple facilities and system. small required area. especially adequate to underground facilities 2) Easy handling against variation of wastewater natures according to arbitrary changes of aerobic. oxygen-less. and anaerobic conditions. and adjustment of organic substances decomposition. denitrification. and dephosphorus capacities 3) Not influenced by variation of loads – treatment possible between a minimum load of 25% and a maximum load of 500% 4) Excellent quality of treated water adequate to recycling for heavy water 5) Unmanned auto operation and no need for operators in case of small treatment plants 6) Low investment cost and low operation and maintenance costs 4. Application Sewage treatment plants and package type of small sewage treatment plants | Technology & Process |
| 734 | Helical type Scum Remover | Helical type Scum Remover | Wonchang Entec Co., Ltd. | http://www.wontec.co.kr | 1. Outline Helical type scum remover is the equipment that is applied to the initial/final sedimentation basins in the water treatment system of sewage/waste water treatment plant. which is adopted in the rectangular basins. One side of fixed water path is beach shaped for easy cross-over of the scum. and scum is removed into the fixed water path over the beach area by scum pulling-up action of the helical ribbons attached on the rotation shaft installed inside the beach of this facility. 2. Introduction 3. Characteristics - Less water consumption as of the scum pulling-up action of rotating helical ribbons - Easy to move scum to the skimmer side by the helical ribbon action - No worry of rotation failure by sticking - Can operate in the water level variation. and active scum removal is available 4. Application - Scum removal |
Equipment |
| 735 | HEPA Filter Media | HEPA Filter Media | Sungjin Co., Ltd. | http://www.sungjinco.com | 1. Outline - HEPA Filter Media. 2. Introduction 3. Character - Multifunctional HEPA filter with anti-bacterial. anti-fungal and anti-allergy functions. - Combined HEPA filter with deodorization. - Synthetic HEPA filter made of melt-blown polypropylene (not glass fiber). - High efficiency. small pressure-difference. and long-lasting lifetime. 4. Application - Air purifiers - Air conditioners |
Equipment |
| 736 | HF EEFL | HF EEFL | EI Lighting Co., Ltd. | http://www.eilighting.com | 1. Outline HF EEFL shows high luminous flux. high efficiency and mechanical stability in addition to normal EEFL’s advantages. longer life and low price. HF-EEFL enables not only LCD and a limited range of advertising lights but also a broader range of general and special lights to enjoy the benefits of EEFL. Production. operation and system arrangement of HF-EEFL can be optimized according to the purpose of the lamp making it suitable for many places. 2. Introduction 3. Characteristics - Excellent light efficiency (an efficiency measure of a luminous source) of over 80lm/W. - Light mercury content 5mg. lower than conventional fluorescent lights. Due to the long lifespan. it consumes a very small amount of mercury per hour. making compliance with RoHS and WEEE (EU environmental standards). - Lower installation cost compared to conventional fluorescent lights. Its feature enables many lamps to be connected in parallel by one inverter. and therefore can be on/off at the same time. 4. Application - Replacement of existing fluorescent lights - Building. factory. store. warehouse. exhibition hall and residence lights - Long-lasting lights for places with 24 hour lighting: tunnel. underground facility. hospital. public building and convenient store. |
Technology & Process |
| 737 | HI-FILTER | HI-FILTER | J-E TECH Co., Ltd. | http://www.j-etech.co.kr/ | 1. Outline - This HI-FILTER improves a control capacity of fine dust particles through the combination of an electric precipitation technology and a bag filtration technology. 2. Introduction 3. Characteristics - Reduction of dust loading of a filter bag as most of dusts that flow in are collected on a dust collecting electrode. - Increase in filtration speed due to reduction of dust loading of a filter bag. - Expected lifespan of a filter bag due to extension of a removal interval of a filter bag - Reduction of operating expenses. - Reduction of expenses for replacing a filter bag. - Increase in collection efficiency of fine dust particles due to characteristics of pre-charged dust particles which are condensed each other and then collected. - Prevention of bag filter damage due to a high voltage discharge. 4. Application - Fine Particle Filtration |
Equipment |
| 738 | HI-FIM (Hollow Fiber PVDF Membrane) | HI-FIM (Hollow Fiber PVDF Membrane) | H2L Co., Ltd. | http://h2l.co.kr/eng/ | Product Description * Hollow Fiber Membrane with pore size 0.05㎛. Pressure Driven and Outside to Inside Flow Pattern Separate the colloids like algae. bacteria. protozoa and the suspended solids from influent. * PVDF material with high characteristics for chemical resistant. pollution resistant and chlorine resistant * Easy expandability per the treatment requirement Product Feature * Less energy consumption by the phase separation of the manufacturing process at low temperature * Pore size below than 0.1㎛ removes fine Suspended Solids. Bacteria. Giardia. Cryptosporidium which is difficult to remove with the conventional purification treatment * Condensed outer/inner surface and asymmetric pore structure results pollution-resistant on outside-to-inside stream operation. * Cost effective approach through local manufacturers with PVDF hollow fiber membrane * Allow to adapt the membrane process for water purification by the change of metropolitan water law. Application * Water Purification: Large/Medium scale water purification plant. industrial water supply pure water generation for electronic. semiconductor and automobile. * Water Recycling: Reclamation by the treatment of effluent from sewage and waste water. * Sewage Wastewater Treatment: Install Membrane System after the biological for the replacement of existing precipitation. filtration and disinfection and reduction of sludge volume. *Others: Waste Water from industrial plant and livestock. Leachate treatment etc. | Equipment |
| 739 | High Concentration Organic Wastewater Treatment System | Ilshin Environmental Eng Tech Co., Ltd. | http://www.ilshinenv.com | 1. Outline High concentration organic wastewater system is the ultra high load type active sludge equipment. which can operate the BOD load 40-50 times higher than conventional active sludge method. It is an epochal system that can be applied to all the organic wastewater. and can be installed in narrow area. 2. Introduction 3. Characteristics - Applicable to all the organic wastewater - High load treatment equipment for BOD volumetric load of 20-50kg-BOD/㎥.day - Carrier surface area is large enough to cultivate high concentration microbes 40-50 times bigger BOD volumetric load compared to conventional active sludge method of 0.5-1.0kg.BOD/㎥.day - Non-dilution treatment of wastewater for BOD concentration of more than 1000mg/L is available - Strong against the load variation and its capability is recovered in short time - Reduced installation area size - Requires 1/20-1/40 installation area size compared to the installation area for conventional active sludge method - Most suitable as a pretreatment system - Stable operation is available without extension of facility if it is adopted as pretreatment equipment for existing active sludge facility in the overload condition - Control the bulking phenomenon completely - Control the generation of odor 4. Application - High concentration organic wastewater generating businesses - Work sites where area is limited |
Technology & Process | |
| 740 | High efficiency bio-film filtering system | GBAF | ANT Co., Ltd. | http://www.antcorp.kr | 1. Outline - A system that can be widely applied in water purification treatment using waste water/sewage treatment. underground water and surface water. and as a single process it can simultaneously execute functions of aerobic tank. settling tank. and filtering system. and is a technology that capable of nitrification. denitrification. and phosphorous removal 2. Introduction 3. Characteristics - Minimization of chemical use - Reaction to change in inflowing water quality is easy - Minimization of sludge production and backwash quantity - Simultaneous removal of various pollutants possible - Does not produce harmful backwash water - Pollutant is not detained or condensed but destroyed - Based on more effective and fast filtering capability. processing capacity if very large - Environment friendly technology that has no secondary pollution - Technology that can meet up to user’s demands: reform and recycle of existing facility is possible - Compared to existing process. over 70% required land can be reduced - No production of foul odor - No production of difficult to process by products - Saves over 70% electricity cost 4. Application - Waste water/sewage treatment - Water purification treatment |
Equipment |
| 741 | High Efficiency Bio-Reactor | E-PFR | EcoDays Co., Ltd. | http://www.ecodays.co.kr/ | 1. Outline - High efficiency bio-reactor is a plug flow reactor type. the flowed in wastewater and air have the upflow feature. It has the special internal structure securing gas holdup space available to stay for some time at many layers and upper of layer by the internal separating plate and fluid moving pipe. - By this reason. the contacting area between air and liquid becomes larger and it is available to convey the oxygen of high efficiency between air and liquid. Moreover. the operating cost is cheap due to low air passing resistance and the maintenance cost is cheap because there are not problems such as exchanging oxidizer. 2. Introduction 3. Characteristics - PFR (Plug Flow Reactor) type suitable to highly concentrated wastewater - Sufficient oxygen supply and mixing effect without air diffuser (oxygen conveying efficiency is 25-35%) - Maintaining high concentration of microorganisms and activation in the reactor (MLSS 10.000 - 50.000mg/L. F/M 0.3 - 1.5kgBOD/kgMLVSS/d) - Quick and stable treatment efficiency (less than 20-50% compared to the conventional facility) - Inducing the desulfurization by internal circulation and high degassing efficiency - Space. installation cost. and maintenance are reduced by compact treatment process. 4. Application - Treatment of highly concentrated wastewater |
Equipment |
| 742 | High Efficiency Bio-Reactor | Aquex Korea | http://www.aquexkorea.co.kr | 1. Outline • Bio-Reactor developed as the necessity to reduce costs and area for biological treatment of wastewater increases and the necessity of efficient biological treatment of liquid phase for which separation of liquid and solid is completed (removal of 99% or more) 2. Introduction 14Biz-470_High_Efficiency_Bio-Reactor.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-470_High_Efficiency_Bio-Reactor.JPG'>3. Character • Very high utilization efficiency according to air inflow • As an air contacting inner surface area is 1.000 to 1.500 times larger than that of the existing activated sludge tank. its pollutant removal efficiency is very high • BOD Removal: 4~12g/㎥ • Easy to install and low maintenance costs due to mobile equipments • Possible to design and manufacture according to pollution concentration of wastewater flown in • Very low maintenance costs (electricity. etc.) • Very small installation area • Since it is manufactured as a form of tank. it may be installed indoor and it is easy to control malodor 4. Application • To treat effluent from household wastes • To treat livestock wastewater and slaughter house wastewater • Food processing plant (milk. juice plant. etc) • Ethyl alcohol plant • Paper mill • Sewage treatment plant • Other industries which generate organic wastewater |
Equipment | |
| 743 | High efficient artificial wetland | High efficient artificial wetland | Assum Ecological Systems Inc. | http://www.assum.co.kr | 1. Outline This high efficient artificial wetland is to change a subsurface flow wetland in the combination type artificial wet land into an ecological filter basin. A removal effect is kept without clogging even when raw materials with high concentration flow in by filtration of plant roots. In addition. maintenance is easy and economical by minimizing problems in flow. 2. Introduction 3. Characteristics - Improve a capability of removing pollutants in the order of precipitation pond⇒ surface flow wetland⇒ ecological filtration basin. - Operation cost and maintenance cost can be minimized because there is no clogging. - The artificial wetland can be used as an ecological park or a nature exploration area. 4. Application - Ecological filter basin |
Equipment |
| 744 | High Efficient Fluidizing Media (ANT21 Media) | Globe Environment Tec. Co., Ltd | http://kor.getec21.com | 1. Outline • It is a media that purifies wastewater by using aerobic microbes to decompose the pollutants and anaerobes to remove nitrogen/ phosphorus substances. 2. Introduction 14Biz-79.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-79.JPG'>3. Character • It works properly even with low- or high-concentration shock load. • It is easy to install and to maintain. • It does not require the installation of media leakage prevention structures. • Its surface roughness. specific surface area. and porosity are suitably designed for easy media attachment. • It is durable and has excellent media strength. 4. Application • Removal of pollutants • Removal of nitrogen/phosphorus • Water treatment |
Eco-Friendly Products | |
| 745 | High Performance Filter | High Performance Filter | Clean & Science Co., Ltd. | http://www.cands.co.kr | 1. Outline - High Performance HEPA & ULPA filters for air conditioning 2. Introduction - CnS HEPA FILTER-MINI ㆍ Collection efficiency 99.97 % based on 0.3 μm. applied to manufacturing plants for semiconductors. LCD. pharmaceuticals. etc. - CnS HEPA FILTER-SEPARATOR ㆍ Collection efficiency 99.97 % based on 0.3 μm. applied to manufacturing plants for semiconductors. LCD. pharmaceuticals. etc. - CnS HEPA FILTER-SEPARATOR (LARGE CAPACITY) ㆍ Collection efficiency 99.97 % based on 0.3 μm. applied to manufacturing plants for semiconductors. LCD. pharmaceuticals. etc. - CnS HEPA FILTER-GEL ㆍ Perfectly complemented to the existing gasket types of sealing. suitable for the KGMP standard. proper for pharmaceutical companies. hospitals. etc. where higher reliability is required. 3. Character - Cns HEPA Filter : Collection efficiency of 99.97% based on 0.3 μm. - Cns HEPA Filter GEL : Perfectly complemented to the existing gasket types of sealing. suitable for the KGMP standard. - Cns HEPA Filter – High Temp : Able to work at a temperature of 250 ℃ using silicon. - Cns ULPA Filter : Collection efficiency of 99.9995% and higher based on 0.1 μm. applied to Clean Room Class 100. applied to FFU System. 4. Application - Semiconductor process - LCD process - Pharmaceutical process |
Equipment |
| 746 | High temperature aerobic digestion | ATAD SYSTEM | Hansung Cleantech Co., Ltd | http://hscleantech.com | 1. Outline - This is high temperature aerobic digestion which oxidizes and decomposes soluble organic matters by maintaining high temperature depending on oxidation heat generated from microbes through oxidation of organic materials without using any energy from outside. The biggest challenge of this technology is to use oxidation heat from high temperature microbes without emitting it to the outside and keeping the heat inside the reactor to use as decomposition heat for organic materials. 2. Introduction 3. Characteristics - Do not need to supply heat as the reaction is based on its own oxidation heat. - Reaction takes place at high temperature reducing sludge stabilization period through rapid organic material removal speed. - Do not need additional facilities to supply or cultivate microbes due to their fast growth speed. - Do not generate bad odor and discharged sludge is similar to mold which produce biologically stable final product. - High temperature aerobic digestion does not depend on the temperature of the weather and is available based on its own generating heat. - Able to reuse treated sludge as composts along with the removal of organic materials and high temperature also kills pathogenic bacterium - Use efficiency of injected oxygen is very high as nitrification. which usually happens at mid-temperature aerobic digestion. does not happen. 4. Application - Reduction and stabilization of organic sludge - Pre-treatment for sludge reduction from current sewage treatment facilities (combined with anaerobic digester processes) - Pre-treatment and stabilization of wastewater from stock farming - Pre-treatment and stabilization of excreta - Pre-treatment of other high concentration organic wastewater |
Technology & Process |
| 747 | High turbidity filtration system | High turbidity filtration system | Hwan kyeong Bio Co., Ltd. | http://www.enbio.net | 1. Outline - High turbidity filtration system 2. Introduction 3. Characteristics - Combination of settling pond. sand filtration and hollow fiber membrane. - Available to apply to the high turbidity water. - Sand filtration adapts the timer type automatic backwashing function. - Function to maintain the temperature by itself. - Available to filter the high turbidity water for a long time by the sand filtration and hollow fiber membrane. - Penetration of chemical material. 4. Application - River having the high turbidity water (more than 300NTU) for a long time |
Equipment |
| 748 | High-Efficient Membrane STS Tube Type Air Diffuser | High-Efficient Membrane STS Tube Type Air Diffuser | Taerim Industry Co., Ltd | http://www.taeri.co.kr | 1. Outline - Membrane stainless Tube-typed Air Diffuser. 2. Introduction 3. Character - High durability due to an access part made of STS304 and prevention of an air diffuser damage with buoyancy. - Cap part designed to keep an air diffuser tight that is detachable so that the cap may be kept intact even in the face of damaged rubbers. - Reduced buoyancy due to the weight of STS304. - High oxygen delivery rate and prevention of dead zones in an aerobic tank. - Upgraded resilience of a rubber art that produces minute vapors. - High oxygen delivery rate. 4. Application - Aerobic tank - Oxygen-free tank |
Equipment |
| 749 | High-efficient Submersible Aerator with Air Diffuser | High-efficient Submersible Aerator with Air Diffuser | YUCHEON ENVIRON CO., LTD | http://www.yucheon.co.kr/ | 1. Outline This High-efficient Submersible Aerator with Air Diffuser is a product which received performance qualification as a product developed by the technology of small and medium companies. and it is an innovative product significantly reducing the consumption of energy which is compatible with old products. 2. Introduction 3. Characteristics - Realize the optimal agitation state and oxygen transfer efficiency by optimizing the diffusion of air/liquid mixed solution containing micro bubbles. as the direction of dispersed water stream and a discharging outlet is matched up. causing almost no turbulent water or resistance - Improved oxygen transfer efficiency significantly by narrowing the gap between a diffuser and casing and applying additional air diffuser separate from an air distribution device. which generates micro bubbles and supplies more air than the standard - Oxygen transfer efficiency is more than 30% higher than the old submersible aerators - Reduce operation cost (blower and energy cost) by more than 30% compared to the old submersible aerators - Can be changed into a high-efficient submersible aerator with an air diffuser by simply changing discharge casing. 4. Application - Oxygen transfer |
Equipment |
| 750 | Highly Functional Polymer Flocculant | Highly Functional Polymer Flocculant | OCI SNF COMPANY | http://www.oci-snf.co.kr | 1. Outline • This is a water-soluble polymer to precipitate suspended particles in water by adsorbing and cross linking. It is used in the solid-liquid separation processes. such as concentration. filtration. and dehydration in different industrial fields. including wastewater treatment to flocculate. 2. Introduction 14Biz-140.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-140.JPG'>3. Characteristic • The flocculant performance is classified as a reaction by electric charge between suspended materials and flocculant and a reaction by molecular weight and other structural characteristics. Therefore. there are approximate optimal applications by ionic character. • Polymer flocculant classification - YANGFLOC is divided into powder type and emulsion type according to product properties and YANGFLOC from each property consists of anionic. nonionic. and cationic based on the iconicity retained by functional group. • The polymer flocculant effect by suspension pH - There are a lot of hydrogen ions in water of acid zone as a cationic state; it disrupts electrostatic coupling between anionic polymer flocculants and suspended materials. - There are hydroxyl ions in alkaline zone as an anionic state; it disrupts behavior of cationic polymer flocculant. Therefore. the difference of effect depending on pH will occur. - Nonionic polymer flocculant has weak binding force but there are few changes in flocculant effect by pH. 4. Applications • General industrial wastewater. such as paper making. textile dyeing. and chemistry field • Sewage/hygiene/livestock wastewater products • Mine industrial dredge / aggregate washing |
Instrument & Chemicals |
| 751 | High-powered deodorant | Ordor-kill | Sunjin B&T Co., Ltd. | http://www.e-sunjin.co.kr | 1. Outline - High-powered deodorant. that is to say. an ordor-kill. 2. Introduction 3. Character - Prompt & powerful deodorization effect. - No secondary pollution and harmless to the body and livestock. - Economic deodorant with a long lasting effect and a high delusion rate. - Remove the root cause of odor and easy to use. - Scientific safety. 4. Application - Excrement treatment plant - Waste landfill - Sewage treatment plant - Agricultural/livestock products processing plant |
Instrument & Chemicals |
| 752 | High-speed anaerobic digester | High-speed anaerobic digester | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - This high-speed anaerobic digester was developed and upgraded by the Korean technology that solved the problems of existing digesters and improved performance. The high-speed anaerobic digester improves reduction efficiency by digesting high concentrated sludge at a high speed and doubles gas generation and is easy to maintain. 2. Introduction 3. Characteristics - Perfect agitation function of a large- capacity high concentrated digester - Smooth separation of gas and liquid by a media layer - Minimization of subsidiary facilities (structure etc.) because the digester is very compact - Realization of an automatic cleaning function for media layers and minimization of maintenance - Very low maintenance expense and a semi permanent life and easy and simple maintenance - Excellent digestion efficiency by raising the temperature in advance using steam - Shorter retention time and higher treatment efficiency than any other anaerobic digesters 4. Application - High efficient anaerobic digester in newly built sewageㆍwastewater treatment plants - Improvement of digester performance for reduction of sludge in existing sewageㆍwastewater treatment plants - High efficient anaerobic digester for treating livestock wastewater and food waste |
Equipment |
| 753 | High-Temperature Compression Belt Dryer ES HYPER-STSTEM | High-Temperature Compression Belt Dryer ES HYPER-STSTEM | ES ENERGY Co., Ltd. | http://eses.co.kr/ | 1. Outline - The high-temperature compression belt dryer. “ES HYPER-STSTEM” is designed to operate a drying process through high-temperature compression by featuring the world’s first proven Teflon belt and caterpillars under the conditions of high temperature. The system involves a highly energy-efficient synthetic heat transfer fluid to treat organic and inorganic waste water sludge through high-temperature compression evaporation and a drying process. 2. Introduction 3. Characteristics - A variety of energy sources available (Bunker C Oil. diesel oil. LNG. electricity. waste heat) - Feasible to place the equipment in parallel order by adopting an external heating unit method - Feasible to increase a dehydration effect through compression on the external side of an exothermic roller - Feasible to improve heat transmission by compressing sludge - Boasting of heat-resistance. high electric heating and ventilation -Obviating the need for washing water because no fixation phenomenon is observed - Maximizing drying effect because both sides of sludge are dry 4. Application - Drying system |
Technology & Process |
| 754 | High-Volume Air Sampler | HV-500R | SIBATA Co. Ltd. | http://www.sibata.co.kr | 1. Outline This High-volume air sampler “HV-500R.” capable of absorbing 200 to 800 L/min per hour. is designed as a small-sized device so that it can capture and move easily. Incorporating an inertia impaction separation device. a shuttle tube and other options. the device may be used to meet multiple purposes as an air sampler suitable for measuring working and air environment. 2. Feature -Inhibit the decrease of absorption caused by the increase of samples that started with the use of an air sampler - Show digital indicators of volume. pressure and flow. - Inhibit instigator with the use of a brushless - Take countermeasure against noise - Incorporate a shuttle tube for dioxin sampling by featuring an optional adaptor - Feature an optional separation device to carry out separation sampling of more than 10μm and 100 percent 3. Introduction 4. Application - Measure dust in the factories and business sites - Implement dioxin sampling at landfill sites and incinerators - Introduce dioxins used to deconstruct waste in the incineration facilities |
Equipment |
| 755 | Hiox Diffuser Ultraflex Aeration Panel | Hiox Diffuser Ultraflex Aeration Panel | ATE Co., Ltd. | http://www.atecorp.co.kr/ | 1. Outline • The Hiox Diffuser Ultraflex Aeration Panel. with its ultrafine bubbles. achieves 20%–50% higher SOTE (Standard Oxygen Transfer Efficiency) than the traditional diffused air systems. The additional membrane area and low air flux rates of this unit can significantly lower the air requirements. thus keeping the operation energy costs low. 2. Introduction 14Biz-54.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-54.JPG'>3. Character • It is very energy efficient. • It produces 1 mm ultrafine bubbles. • Its oxygen transfer surface is 200% larger compared to traditional ones. • It has a High SOTE (over 50% of oxygen transfer rate). • It has a wide flux rate range. • It has effective floor coverage (up to 60%). • It has low installation cost. • It is highly portable and is easy to install. • It has minimal pipe requirement. • Its installation cost is 50% lower than the traditional ones. • It is easy to operate and maintain. • It automatically operates and aerates. • Its membrane is easy to replace. • It has a long service life (8–12 years). 4. Application • Activated sludge process • BNR process • SBR process • MBR process |
Eco-Friendly Products |
| 756 | SADF membrane | SADF membrane | The Korea Express | http://www.smas.co.kr/english | * Characteristic of SADF™ membrane - Very High Flux : Three times higher than HFL and SUR - Anti-chemical - Very high physical strength : 60 times higher than HFL and SUR - Long operation time through backwashing - Long membrane lifetime : 10～15 years * Specification of SADF™ membrane - Material : PVDF - Outer Diameter : 2.8±0.1㎜ - Inner Diameter : 1.1±0.1㎜ - Flux(Clean water) : >70㎥/㎡hrMPa - Pore size : 0.4㎛ * Specification of SADF™ membrane module - Material ① Membrane : PVDF ② Part of water collection : Stainless steel or ABS resin ③ Part of connection : PVC ④ Part of support : Polyethylene resin ⑤ Sealing Resin : Polyurethane - Dimensions : 2.000㎜(height)×1.250㎜(width)×30㎜ (thickness) - Area of membrane : 25㎡/module - Diameter of water collection part : Φ24 - Weight(dry) : 16㎏/module * Operation condition of SADF™ membrane -Operation temperature : 5～40℃ -pH : 3～9 -Operation TMP(TransMembrane Pressure) : < 30kPa -Effective maximal TMP : Initial TMP + 30kPa -Optimal Flux : 0.8m/d -Amount of aeration : (100～150㎥/㎡hr) per (1㎡. Projective area of frame) * Method of Cleaning ① Backwashing - Period : Once a week - 100～500㎎/ℓ conc. of hypochlorite solution for backwash - In case of inorganic fouling. 2% conc. of acid can be used as backwash water - The amount of backwash water = 2ℓ/㎡ + volume of pipe ② Cleaning out of the Bioreactor - Period : Once every 3 to 6 month. - Submerge the frame into the 3.000㎎/ℓ conc. hypochlorite solution. - In case of inorganic fouling. 1.8～3.7%(0.5～1N) conc. of Hydrochloric acid can be used as cleaning agent(for 2～15hours) * The application of SADF™ membrane (In terms of economic problem) -Big scale of sewage and wastewater treatment plant -Facilities which is troubled with running cost -Very small land area -High quality of treated water * Registration to the patent and model -2004.2. - Registered as Invention Patent “ The removal system of N&P in the wastewater -2001.5. - High treatment system to high concentration organic wastewater Patent No. 0296411 -2001.4. - Registered as utility model Frame equipment of membrane for wastewater treatment Registration No. 0228498 * Approved as new-tech by Environment Department -2001. 10. - Acquired Letter of Appointment Environment New Technology No. 31 -2001. 10. - Acquired Certificate of Environment TechnologyNo. 33 |
Equipment |
| 757 | Hollow Fibers | econity | http://www.econity.com/en/business/products.html | Hollow Fibers Hollow fibers are the empty hole inside of straw-type membrane. Econity’s hollow fiber membrane is made in “Stretching method.” Filtration direction is out-in style. Through less than micron size pores on hollow membrane. the water molecules (H2O) only pass while the solids including contaminants not pass and remain by the “separation mechanism.” With one of advantages from the unique stretching method. the pores on the membrane surface will be structured in slit and ellipse. This will induce to a less-fouling function. ECONITY Hollow Fiber Features - Slit/Ellipse pore structure. - Asymmetric pore structure. - Higher permeability. - Higher tensile strength. - Higher chemical resistance. - High packing density. . | Equipment | |
| 758 | Hopper & Conveyors | Wise EnTech Co., Ltd. | http://www.wtcom.co.kr/ | 1. Outline - Hopper: It is installed to store sediment. adulteration. and dehydrated cake temporarily until discharging (Application: municipal sewage treatment plant. water purification (waterworks) plant. polluted/waste water treatment plant) - Conveyor: It is the transfer device of adulteration. sediment. and dehydrated cake generated in various treatment plants to desired location 2. Introduction 3. Characteristics ① Hopper - Can prevent odor and clean the circumference - Secured open/close operations as of the cut-cake type - The gate open/close cylinder can be operated by selected power. hydraulic. or air - The input amount can be figured out and adjusted when using weight sensor. - Automatic discharging is available after the set amount has been collected. ② Trough type conveyor - Suitable to transfer adulteration and dehydrated cake - Can be used within the 20˚ inclined angle ③ Climber belt conveyor - Can be used for the transfer in the steep slope of 25˚~50˚ - There are wings to prevent slip of transferring materials ④ Wrinkle-hook belt conveyor - Can be used up to 75˚ inclined angle - No need of spill-proof skirts as high waveform walls are attached - It can be used in multi-angularity by pressing down the roller ⑤ Double chain flight conveyor - Suitable to transfer sediment - Closed type for clean circumference and to prevent odor ⑥ Screw conveyor - Closed type suitable to transfer the materials that may generate dust - Can be used in the high inclined angle - Transfer the materials by the spiral wings attached to the main shaft - It is possible to transfer to both sides from one inlet. ⑦ Pneumatic conveyor - Suitable to transfer dehydrated adulteration - Semi-permanent lifetime - Can be used in any angles including vertical angle - Small installation space - Not affected by weather as of pipe transfer type - More than 50m transfer is available 4. Application - Hopper & Conveyors |
Equipment | |
| 759 | Horizontal gate valve | Horizontal gate valve | Samjin Precision Co. Ltd. | www.samjinvalve.com | 1. Outline The use of horizontal soft seal gate valves at a time when installing a quick air valve or a hydrant makes maintenance easier. 2. Introduction 3. Characteristics - Outstanding corrosion resistance and durability due to the use of epoxy powder coating and corrosion resisting materials. - Outstanding capability to maintain water as a soft seal gate valve. - Outstanding safety. - Easy to install a rapid air valve or a sunk hydrant. - Best for maintenance. 4. Application - Hydrant - Rapid air valve |
Equipment |
| 760 | Horizontal Multi-stage pumps (SHR TYPE) | Shinhan Pump Tech. Co., Ltd. | http://1181.co.kr | 1. Introduction 2. Characteristics ㆍ SHR pump can be used for water supply. circulation and pressurization of industrial liquid. and it is non self-priming. centrifuge pump in which pump and motor shaft are connected into one ㆍSignificant power reduction as efficiency is maximized by applying 2 pole motor ㆍSimple structure. low noise. low vibration ㆍ No leakage by introducing mechanical seal. easy maintenance ㆍFine external looks and prevented corrosion by using stainless steel casement ㆍStandardization of components to maintain compatibility ㆍAll surface contacting liquid is made of stainless steel (STS 304) 3. Application ㆍConstruction equipment: Building water supply. apartment houses. fire extinguishing purposes. pressurization of water supply. water supply and water conveyance for cooling tower. cooling water circulation for HVAC. general water supply ㆍBoiler: Boiler water supply. heat recovery facility. scrubber. flue gas desulfurization device ㆍFood related machinery: Brewing machine. marine product processing machine. beverage manufacturing machine. freezer equipment. transport of beverages. water supply for ice-making machine ㆍTextile machine: Dyeing machine. fiber textile manufacturing machine ㆍWater treatment plant: Pure water manufacture. enrichment machine. reaction machine. filter. separation device. washing and other diverse plants ㆍSemiconductor equipment. refrigerant circulation. sprinkler. hatchery. to transport nutrient solution of water culture equipment ㆍOther |
Equipment | |
| 761 | Horizontal Spraying Brush Cleaning System Technology | Eco Protect | http://eco-protect.co.kr | 1. Outline • Low carbon green growth technology which emits no carbon dioxide using eco-friendly compressed gas and electric air compressor. unlike the existing compressor • To solve the secondary pollution problem with inflow of polluted compressed air 2. Introduction 14Biz-458_Horizontal_Spraying_Brush_Cleaning_System_Technology.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-458_Horizontal_Spraying_Brush_Cleaning_System_Technology.JPG'>3. Character • To solve civil complaints against cleaning of underground well by minimizing noise and vibration • To adopt horizontal cleaning technique in which a spray device and a brush clean while they descend. unlike the existing vertical cleaning technique • Since this. as a horizontal cleaning technique. solves screen blockage. this is excellent in increasing quantity • Customized cleaning technique in which focused cleaning is possible by identifying a pollution generation spot and screen location of casing within underground well through underground water endoscopy • Physical/chemical/biological treatment method which may remove pathogenic bacteria such as Noro virus in the underground well by spraying ozone gas with eco-friendly compressed air 4. Application • Ex post facto management of underground water (pollution prevention and cleaning) - Pollution prevention - Cleaning |
Technology & Process | |
| 762 | Wooyang ENG, Co, LTD | Stable operation is possible in up to 450°Ｃ. High performance equipment with off-line air dust shaking method in downward air flow. Due to Downward airflow system. dust collection function is excellent. Off Line Air Pulse Jet type excellent in shaking off dust function. Excellent Heat-Resisting. chemical resistance and Abrasive resistance High operation temperature. Excellent air permeability & Low operating pressure. Harmful gas(NOx . VOC’S . H2S)-decreasing catalyst function. Applications Thermoelectric power plant. Glass tank. Phlogiston boiler. Steel. Engine gas collection etc High temperature dust collection | Collection & Transportation | |||
| 763 | Household Appliances Air Sterilizer | KIAS - 09135, 1202W Series | KUMHO INDUSTRY CO., LTD. | http://www.waterpower.co.kr/ | The usual air cleaners commonly use a filter to separate and collect the noxious particles; it's hard to completely remove the viruses. In addition. the germs including molds bacteria and microorganism may reproduce if the filter is not periodically replaced. These types of air cleaner can be harmful to human body rather safe. Because the riskiness of fine dust and new air-infectious viruses as the swine flu or bird influenza is growing recently. a new air cleaner with more powerful features is required. KIAS air cleaner uses the ultraviolet radiation which is the most environment-friendly and germicidal and removes indoor noxious germs and viruses. Functions of product - Removal of fine dust utilizing High Efficiency Particulate Air filter (High efficiency sterilization using UV-C radiation and photocatalyst) - UV-C lamp emits the lights with 253.7nm of wavelength that have a fatal influence to microorganisms as bacteria. mold. yeast - Improved reduction of germs/viruses with the introduction of ultraviolet sterilization technology that uses UV-C and photocatalyst. - Optimized efficiency of sterilization by capsule partition proper for a circular structure: ① Extended penetration time with a vertical-arranged UV lamp structure (3-4 times longer penetration distance when applying 55W instead of 8W) ② Enhanced UV irradiance and penetration time through the design of bulkhead structure and photocatalyst dopingImprovement of sterilization efficiency by application of photocatalyst surface treatment technology | Equipment |
| 764 | HQ11d Portable pH Meter | HQ11d Portable pH Meter | YUILLAB TECH CO., LTD | http://www.yuillab.com | 1. Outline HQ11d has a pH probe needle specially designed for the use of HACH’s IntelliCAL Probe. The 500-points data storage stores measured values and calibration records. 2. Introduction 3. Characteristics - IntelliCAL Probe minimizes replacement cycles and stores calibration records - Probe calibrated when shipped from a factory is immediately usable - Inform the re-calibration time by sounding an alarm automatically - Waterproof for 24 hours - Have sensor cables with various lengths meeting the needs of users - Rugged sensor cable which is made of reinforced metal cables boasts high durability (standard sensor cable: 1~3m / Rugged sensor cable: 5~30m) - Accurate and time-saving with an auto buffer recognition function - Measure record values. link sample ID for data. user ID. and the manufacture’s serial number of the probe by pushing the button 4. Application - Water quality analysis |
Equipment |
| 765 | Humidifying System | Alpha-Airbank Air Cleaning and Humidifying System | Dae Yang Hi-Tech Co., Ltd. | http://www.alphawater.co.kr | 1. Outline - Alpha-airbank air cleaning & humidifying system purifies air by removing foreign substances in the combination process of water and air. and maintains proper indoor-humidity by the humidification with micro corpuscle evaporation. 2. Introduction 3. Character 4. Application - Computer rooms. server rooms. research facilities. manufacturing plants and where you need precise humidity control. |
Equipment |
| 766 | Hurikan | EH Solution | http://www.ehsolution.co.kr | 1. Outline • It is a mobile incinerator that prevents secondary environmental pollution caused by burying a body when foot-and-mouth disease. AI. and red tide occur. 2. Introduction 14Biz-419_Hurikan.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-419_Hurikan.JPG'>3. Characteristics • Satisfies the emission standards in Europe by applying a double chamber • Minimizes fuel consumption and reduces incineration time • Maximizes incineration efficiency and ash generation by 5% or less • Easy transportation and automatic operation control 4. Applications • Incineration of bodies of animals and livestock (when foot-and-mouth disease or AI occurs) • Incineration of dead fishes by red tide • Incineration of red-bag wastes • Incineration of urban wastes |
Technology & Process | |
| 767 | Bellaria | HWANWOONG PRECISION | http://hwanwoong.e-coreweb.co.kr/_eng | Bellaria means 'clean air' in Italian. It's a deodorant which developed to deal with any odors. The main ingredient is a Magnesium silicate hydrate (natural porous clay) which is sort of clay. Realize gas absorption ability to little before from independent catalyst combination target odors. Product Features - Using recycled playback (play more than 200 times. Can be used semipermanently) → Realization of the economic maintenance - Honeycomb structure as a main component a porous ceramic → Compacts a facility in accordance with less pressure loss → Reduction costs electricity → Absorption efficiency rising according to large surface area → High in the fire safety - Filling cartridge type → Beraria the ease of replacement cartridge - Physicochemical adsorptive power to a big. small particles Highly Efficient Absorption performance maintenance | Equipment | |
| 768 | Hybrid Module Dust Collector | HWANWOONG PRECISION | http://hwanwoong.e-coreweb.co.kr/_eng | Feature -Low dust emission concentration 5mg/m3 or less. extended filter life 2 years -3 fusion hybrid dust collector dust collector technology -Facilities General precipitator cost level. less than 60% compared to conventional high-performance scrubber -With low cost. get rid of micro dust in factory Characteristics of the Hybrid Dust Technic -Basic Module: 1 Set = 12.000㎥/hr -Expanded Module: 4 Sets = 48.000㎥/hr 8 Sets × 4 rows = 1.530.000㎥/hr -MERIT › Simple CAPA UP via modularization › Easy SCALE-UP › Additional amenities include cost affordability › Performance Verification through prolonged adaptation: Has proven technical maturity | Equipment | |
| 769 | Hybrid particle counter | Hybrid particle counter | Hwan hyeong Bio Co., Ltd | http://www.enbio.net | 1. Outline - Hybrid particle counter 2. Introduction 3. Characteristics - Measurement of particle coefficient and turbidity by one device. - Available to measure the low turbidity by 0.0001mg/L. - Display the turbidity and particle coefficient at the same time. - Improvement of efficiency by the hybrid measuring type by combining the forward scattering method and light interruption method. 4. Application - Lakes and reservoir - Water purification plant - Beverage plant |
Equipment |
| 770 | Hybrid Reverse Membrane Bio-Reactor | BIO-CEL?MCP | Jeong Woo Environmental Technology Inc. | www.koreambr.co.kr | 1. Outline Mechanical Cleaning Process (MCP) is a new. nature-friendly non-chemical cleaning method that innovatively improves the limits of reverse chemical cleaning. an existing cleaning process. by increasing transmittance through a physical cleaning method that cleans a separation membrane contaminated with microorganisms. colloids. scales or macro polymer particles. 2. Introduction 3. Characteristics - Filtration with low operating pressure and saving electricity cost (more than 30%) - Not requiring chemicals in removing fouling layerㄴ - Circulation-type physical cleaning using a certain amount of granulates - Nature-friendly cleaning process without destruction of the environment - Superior cleaning process that does not affect the removal of turbidity and COD - In case of wastewater. filtration for more than 2 years without reverses cleaning - Superior cleaning process especially for waste water containing high molecular substances 4. Application - Separation Membrane Cleaning |
Technology & Process |
| 771 | Hybrid Street Lamp | MJ-VWL50 | MIJI ENERTECH Co., Ltd | www.mijienertech.co.kr | 1. Outline - The company produces eco-friendly hybrid street lamps (or guard lights) equipped with a solar power system. wind power generator and a LED lamp. 2. Introduction 3. Character - Photovoltaic: Photovoltaic power generation : Application of high-efficient monocrystalline solar cells with CE and ROHS certifications. - I Improve generation efficiency by using low-iron tempered glass. EVA Film and TPT back sheets. - LED LAMP : Guarantee 50000~70000 hours long service time. - 50~70% of Energy saving effect compared to common street lamps. - Controller & Battery : Maximization of charging efficiency with a PMW method. - Securing of safety by adopting reversed polarity protection circuits. - Improvement of charging efficiency by battery voltage compensation depending on the temperatures. - Wind power generation: Optimal blade design via Fluid interpretation. - Stability through wind tunnel tests. - STARTING-UNIT which moves at a low wind velocity. 4. Application - Hybrid street lamps |
Equipment |
| 772 | Hybrid Transformer | Ener Keeper Solution 2 | Enertech Co., Ltd. | 82-32-322-8584 | 1. Outline - A transformer to enhance the facility efficiency by supply of quality electricity for energy saving as of the reduction of resistance loss. core loss. and mechanical loss through the improvement of harmonic wave and imbalance 2. Introduction 3. Characteristics - New technology product with all the functions of transformer and improving harmonic wave and imbalance - Solved the demerits of conventional mold transformer and oil immersed type transformer as it is produced with dry transformer design - Environment friendly product that can be recycled - Reduce the loss and noise drastically compared to conventional transformer - No need for installing separate devise to improve harmonic wave and imbalance 4. Application - Transformer for power distribution |
Technology & Process |
| 773 | Hydraulic Automatic Floodgate | Hydraulic Automatic Floodgate | DAE HAN Industrial Machinery Co. Ltd. | http://www.dhsumoon.com/ | 1. Outline - The Company’s hydraulic automatic floodgate works by using a lower section delivery movable weir and a verse movable weir. When water level rises. the mechanical operation may not only help fish to move back and forth through the reverse automatic movable weir but also can help to adjust water levels by controlling the plc and contribute to natural effect of rivers. 2. Introduction 3. Characteristics - It can automatically be kept closed thanks to link the equipment in closing (No power needed) - Even when cylinder pressure declines. it keeps the gate closed. - It can be kept more durable due to an enclosed cylinder structure. - It may keep the automatic gate adjustable by up to 90 degrees in closing. - It may keep the angle of a floodgate self-locking from any angles. - The floodgate. made of steel and FRP. can be kept semi-permanent with the use of FRP and may prevent precipitates. - It can prevent disaster. 4. Application - Lower Section Delivery Automatic Floodgate |
Equipment |
| 774 | Hydraulic conveyer press | Hydraulic conveyer press | Cheonbo Engineering Co., Ltd. | http://www.cheonbo.co.kr | 1. Outline This product pressurizes and dehydrates solids contained in the various SCREENS and night soil by using WESGE WIRE SCREEN TYPE PRESS. Dehydrated solids are pushed out through an outlet and separated liquid is discharged through screen net. 2. Introduction (see table 1) |
Instrument & Chemicals |
| 775 | Hydraulic diaphragm type | JMH series | Eco Green Tech Co. Ltd. | http://www.ecotsc.com | 1. Outline This hydraulic diaphragm type JMH is a hydraulic diaphragm type metering pump. The hydraulic diaphragm type JMH is capable of injecting with accuracy under high counter pressure and protecting a pump and a system because it releases pressure automatically in case of overpressure with a relief valve which is contained in the hydraulic diaphragm type JMH. 2. Introduction 3. Characteristics - Capable of injecting up to 50kgf/㎠. 50~8.500cc/min. - Relief valve incorporated - High degree of injection and free of vibration and noise - Strengthened durability -Adoption of the IEC motor standard - Connection of flanges and screws 4. Application - Metering pump |
Equipment |
| 776 | Hydraulic dust collector | Hydraulic dust collector | DS Entech Co., Ltd. | http://www.dsene.com | 1. Outline - It is a screen to remove the coarse and large adulterations in the water by raking and pulling them up. - Multi-stages hydraulic cylinder is installed in the inside of slide boom manufactured by multi-stages so the up and down of boom are operated by the hydraulic power. At the end of boom bottom of multi-stages slide. there are installed the hydraulic rotating device as well as rake. In the driving parts of boom. there are built in the angle-controlling device and left-right driving device. - For these devices. it removes the collected adulterations by up and down of rake with hydraulic power and circulating process of rake. It is travelling to the other side and performing the same process repeatedly. 2. Introduction 3. Characteristics - It does not use the wire of poor durability in the case of doing up and down movement. - It is not influenced by the resistance of water flow of high speed due to the complete hydraulic type and direct operating power. - It is not restricted by the installation space by using three-stages hydraulic cylinder or more. - It is good to remove the adulteration by using hydraulic rake-rotating device. 4. Application - Water-discharging pump station - Sewage treatment plant |
Equipment |
| 777 | Hydraulic Motor ROTODIFF | Hydraulic Motor ROTODIFF | Euros Co., Ltd. | http://www.euros.kr/ | 1. Outline - This Hydraulic Motor ROTODIFF is a positive displacement type radial piston motor. The cam transmits force applied to a piston roller by piston pressure and this force produces a turning force of a rotor. Working fluid is pressurized through a distributor which is mechanically connected to the piston cam inside a cylinder. The piston is alternatively connected to a high pressure hydraulic power supply unit and to the low pressure casing. 2. Introduction 3. Characteristics - Strong structure suitable for unfavorable conditions. - Excellent weight and a torque ratio. - High reliability under unfavorable conditions. - Overload protection. - Operation of a drive in the process of special work arrangement. - Automatic control and restriction - Work in a dangerous site (verification and ATEX certification) 4. Application - Hydraulic Motor |
Equipment |
| 778 | Hydraulic Power Automatic Floodgate | DAE HAN Industrial Machinery Co. Ltd | http://www.dhsumoon.com/ | 1. Outline - In the past. too much costs had to be spent on manufacturing and installing towing and automatic gates on one floodgate. However. the Company developed a floodgate that obviates the need to install the two gates. reducing the cost. 2. Introduction 3. Characteristics - Capable of tackling diverse situations.(Multi-functions) - Easy to maintain. - No need to use separate power due to a hand pump. - Able to adopt safety devices. ㆍRestrictions of automatic gate operated by equipment (No power needed) ㆍRestrictions of an automatic gate operated by a hydraulic device (No power needed). - Water level control - Automatic closing at the mercy of Link equipment in closing (No power needed). ㆍKeep the gate closed even when cylinder pressure declines. - Keep the gate more durable by featuring an enclosed cylinder structure. 4. Application - Hydraulic Power Automatic Floodgate |
Equipment | |
| 779 | Hydraulic pressure butterfly check valve | Samjin Precision Co., Ltd. | http://www.samjinvalve.com/ | 1. Outline Hydraulic pressure butterfly check valve is installed on pump discharge port that protects the pump from a back flow and minimizes the damage on the hydraulic pressure device which is highly energy-efficient valve 2. Introduction 3. Characteristics - It can save the power expense on pumps because it operates the pumps with inflow driving device. - It can control the level of closure depending on the conduits line when the pumps pause. It decreases water hammer and protects conduits line and pumps - It can be closed by system even in blackout. so it is basically emergency shutdown apparatus. - Inflow unit and circuit simplify electric power and it is easy to manage. - Inflow tank is installed high part that increases the efficiency of hydraulic pressure pump and needs small installment space. - Inflow tank is made of stainless steel plate that prohibits inflow from peeling the surface off. - Triplication concentricity seated and laminated metal seated systems extend the life span of the seat. - The center of axis is installed on upper part that increases self-closed force. - Powder Coating when it has Epoch. it increases corrosion resistance. 4. Application - The part where protects pumps from water hammer or a back flow such as pump plant. pressure plant or power plant. |
Equipment | |
| 780 | Hydrogen-ion exponent meter (pH Meter) | EC-PH6 | KINE INDUSTRY | http://www.e-kine.com | 1. Outline pH which is an abbreviation for Potentia Hydrogenii. Latin language means hydrogen-ion exponent. All that contains water has pH. The range of pH is 0 - 14. The pH meter has a measuring range of pH 0 - pH 14. This pH meter can measure pH. ORP(mv). and ℃. 2. Introduction 3. Characteristics - The main body includes only a temperature sensor and its pH electrode is optional. - The price of the meter is very low. The meter has a wide LCD window. an automatic temperature compensation (ATC) function. and an automatic power down function. - EC-pH6 can measure the temperature and mV. 4. Application - Measurement of hydrogen-ion exponent (pH) |
Equipment |
| 781 | Ultrasonic Point Velocity Meter | UC-01L | Chang Min Tech Co., Ltd. | http://www.changmin.co.kr | 1. Outline UC-01L is a hydrologic measurement instrument. This meter measures velocities at various points formed by topographical differences. 2. Introduction It maximized the measurement accuracy with ideal cosine a property (a = +/- 90) and automatic sensing of angles when the meter axis inclines to the flow direction or the velocity increases on the slope. 3. Characteristics 1) Depth Range - Standard 0.1 m ~ 1.0 m - Suspending pipe 0.1 m ~ 3 m (option) - Suspending wire 0.1 m ~ 20 m (option) 2) Measurement Range : 0.01 ㎧ ~ 10㎧ 3) Accuracy : 0.01 ㎧ ~ 0.1㎧: +/-1% 0.1 ㎧ < V ≤10 ㎧ : +/-0.5% 4) Memory: 500 data 5) Power: Rechargeable battery 6) Measuring time interval : 1~99 sec 7) Cosine components : +/-90' (cosα) 8) Signal cable: 6m X 2P within connector 9) Charger adapter: DC 12V <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2004000078_2.jpg></center> 4. Application Field measurement of velocity from surface water to bed hydrogen measurement area | Instrument & Chemicals |
| 782 | HYPER-X | HYPER-X | AK International Co. Ltd. | http://ak-int.co.kr | 1. Outline - This HYPER-X can operate the steps of high pressure/ compression/ vaporization/ dry continuously with a very low consumption power of 0.65(kWh/kg.we or less by adopting the ESGS [ Energy Smart Grid System ] that can make self-diagnosis of [ nano technology ] and energy. The HYPER-X can guarantee a dry matter ratio from minimum 40%ds (60%wt) to maximum 90%ds (10%wt) for sewage sludge. food. beverage. animal product. leather. dyeing. paint. paper. mineral. coal. slaked lime. purification plant. fine grained sludge of 500㎛ or less. steel. metal. oil sludge. organic sludge and inorganic sludge. 2. Introduction 3. Characteristics - High dry matter ratio - Realization of green growth and CDM projects with lower energy consumption - Low initial investment cost and high return on investment - Applicable to all kinds of sludge - Zero energy operation is possible by using various energy sources - Renewable energy can be produced - Clean environment system of cleansing free. foul odor free and dust free - Sludge rating can be improved with a 99% sterilization effect - High safety and convenient operation - Dry can be improved by using a sludge feed device(SFD*). a natural ventilation device (NVD*) and a sludge discharge conveyor (SDC*) 4. Application - Dehydration of sludge |
Equipment |
| 783 | i MBR | i MBR | PhilosG.C Co., Ltd. | http://www.philosmembrane.com | 1. Outline - Unlike existing immersion type module. this product does not immerse a module in a raw water tank and instead makes raw water injected circulated. and vacuum-filtrated into the module. The product is characterized by outside circulation type case storage and a vacuum-filtration membrane module. The product is applicable to a MBR process and can be produced with a packaged system. 2. Introduction 3. Character - Radial arrangement design that prevents alien substances from putting into a module. - Efficient aeration is possible with housing insertion. - Quick removal of alien substances in a module due to aeration. - Air diffuser is built in a module which makes system design easier. - Back washing. CEBW. and CIP are possible periodically or intermittently. - Application of a hydrophilic polymer membrane with good chemical resistance. 4. Application - Improvement of water quality in an immersion type MBR process or a combined purification tank. - Treatment of wastewater reclamation and reusing system in a large building - Treatment of high concentrated livestock wastewater - Treatment process of sewage and wastewater - Separation and concentration of effective materials |
Technology & Process |
| 784 | I&I WMS Intelligent & Integrated Water Management System | I&I WMS Intelligent & Integrated Water Management System | FLOWTECH Co., Ltd. | http://www.flowtech21.co.kr | 1. Outline - I&I WMS stands for an Intelligent & Integrated Water Management System. which integrates pumping. filtering. dosage. and boosting of irrigation in one system and supplies it to places like golf resorts. Most of developed countries that enjoy golfing have adopted this system. and we have developed it for the first time in Korea. 2. Introduction 3. Character 4. Application - Integrated water supply system. |
Technology & Process |
| 785 | IBC Process | IBC Process | Mirae G&C Co., Ltd. | http://www.mrgnc.com/ | 1. Outline • It is a process to efficiently and biologically treat organic materials. floating debris. nitrogen. and phosphorous. • For this. the reactors located in both the former and the latter parts of the IBC Process are charged with media. which is highly concentrated and immobilized. • It is a high-technology process that stably treats impurities while properly responding to the changes in the volume and in the concentration of the influent. • It reduces power costs and minimizes sludge. • This process is patented. 2. Introduction 14Biz-39.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-39.jpg'>3. Character • Highly efficient in removing pollutants as the media in which microorganisms are forcibly immobilized has high porosity and oxygen. and reaction products can enter the media easily. • Has a low surplus sludge discharge rate. • The surplus sludge is rarely produced by microorganisms because the oxidation of pollutants and autoxidation occur inside the media. • Has a stable operation. • There are no problems related to the decline of treatment efficiency because constant precipitation is maintained. • The break-in period is short because it uses immobilized media. • During an initial test run. the pollutants removal efficiency is high with the active microorganisms. which are highly concentrated and forcibly immobilized during the media production stage. • Pollutants. oxygen. and reaction products can enter the media easily because the apparent porosity is high (285–525%). • Surplus sludge is rarely produced because microbial metabolic activity. autoxidation of microorganisms. and anaerobic mineralization occur inside the media. 4. Application • Village sewage treatment facilities • Individual sewage treatment facilities • Existing facilities renovation works • Wastewater reuse facilities • Sewer reuse facilities |
Technology & Process |
| 786 | IBES(Integrated Biogas Energy System) | IBES | Kolon Engineering & Construction | http://www.kolonconstruction.co.kr | 1. Outline - It is an environment-friendly livestock wastewater treatment technology to treat the livestock excreta and recover the electric and heat energy simultaneously by using biogas. 2. Introduction 3. Characteristics - Treatment of livestock wastewater and production of alternative energy at the same time - Flexible process application for each case (anaerobic digestion and advanced treatment) - Excellent power generation efficiency by supplying the gas precisely with dealing with the change of electric load - Securing the economic efficiency and improving the performance efficiency by localizing the system - Convenient maintenance through the remote monitoring - Production of high value by-product : liquefied fertilizer and soil conditioner 4. Application - Livestock wastewater and excreta - Alcoholic wastewater. leachate of landfill site. slaughterhouse wastewater and food-processing wastewater - Other organic wastewater of high concentration |
Technology & Process |
| 787 | Iblin | Iblin | GEzen Korea Co., Ltd. | http://www.gezen.co.kr | 1. Outline Iblin is an acronym for “I am Best Living water in Nature” and means the best water coming from the nature. Iblin is natural mineral water taken from a pristine area of Mountain Daegeum in Gapyeong and contains natural sulfur and organic germanium that flow out from underground at a depth of 350m. 2. Introduction 3. Characteristics - Clean natural water flowing from the bedrock at a depth of 350m underground as the water source is located at the foot of Mountain Daegeum in Gapyeong –gun. Gyeonggi Province. a pristine area surrounded by a pollution-free environment. clean air and clean water bodies and favored with natural conditions for the production of good water - Bridging materials restoring the balance of body health functions - Drinking oxygen supplying oxygen to a human body - Natural germanium water containing up to 15ppb of ionized natural organic germanium. a mineral known for its high capacity of removing active oxygen - No resistance to drinking the water as the size of water particles is small - Fast absorption rate 4. Application - Drinking Water |
Eco-Friendly Products |
| 788 | IGISS | IGISS | GREENTECH ENVIRONMENTAL CONSULTING CO., LTD | http://greentechenv.co.kr/public_html/index.php | Product Description The sewer pipe maintenance monitoring system GIS based. IGISS is able to confirm of effect front and rear sewer construction and assess whole works. In order to keep up continuous and stable maintenance operating sewer system. IGISS system performs the collection and storage of real time data from measuring instruments related in flow rate. precipitation etc. and analyzes I/I quantity. leakage volume etc. from the collected data and then the system is able to offer the effect of the sewer system construction to user. Finally. IGISS is total system offering information and utility of analysis related of sewer system to maintain systematically Product Feature IGISS is composed of three sub application group RMS. TTS. TAS functionally. RMS application is to collection real time data of flow meter or precipitation from main guard post and TTS is to support works of user printing books. exporting GIS data or images etc.. finally. TAS is to analysis things related of sewerage system. Product Specification / Models Program Name: IGISS(Integrated GIS-based Water Quality Management Solution) Version: V1.0 Program Registration No: 2006-01-199-003294 Application 1. Water quality or quantitative analysis fields related of sewage system based on GIS. 2. Sewer pipe maintenance monitoring fields related of sewerage system systematically Optional Information - HS Code : 8523 Prepared Unrecorded Media for Sound Recording | Equipment |
| 789 | Image Acquisition and Analysis System | Image Acquisition and Analysis System | Eco solution Co., Ltd | http://www.ecosol.co.kr | 1. Outline We provide consulting program for designing and manufacturing the applicable systems for the different cases in image analysis area with our various and deep know-how about acquisition and analysis of images 2. Characteristics - ATS (Advanced Tracking System): ATS is a live object trace tracking system to verify its movement track. time. tendency. etc. to analysis of learning level. Through reading the result of this system. effect of the medicines to the animals can be certified. - Control function to the MRI system: We can provide control function module to the MRI system to manipulate the system accurately. We also can provide the 3 dimensional images from accumulating the flat 2-D images and its related user-friendly functions to the medical image acquisition system. 3. Application - To study for Microorganism: Life science engineering. pathology. pharmacy. environment. food. agriculture. forestry. stockbreeding. oceanography. etc. - Various surface inspection: Semi conductors. metal. mechanics. ceramics. geology. fiber. etc. - Medical study: Internal medicine. dentistry. ophthalmology. examination of organization. oriental medicine. etc. | Evaluation & Analysis |
| 790 | Immersion- type flat sheet for treating sewage and waste water | ENVIS | PURE-ENVITECH Co., Ltd. | http://www.pure-envitech.co.kr | 1. Outline - ENVIS SYSTEM. a flat sheet type filtration membrane device that is immersed in a bio reactor instead of a solid-liquid separating process in the final sedimentation pond uses a membrane with pores of 0.4㎛ or less (nominal diameter) to get stable treated water and separate active sludge and clean water completely . The support plate designed with a vertical water course instead of a horizontal water course in order to minimize absorption resistance of treated water is used. ENVIS SYSTEM uses injection which ENVIS guide and collecting pipe are standardized in order to stability of ENVIS frame. 2. Introduction 3. Character 4. Application - Treatment of sewage and waste water |
Technology & Process |
| 791 | Amperometric Immunosensor for Environmental Analysis | Amperometric Immunosensor for Environmental Analysis | Pusan National University | http://www.cns.pusan.ac.kr | 1. Outline - To analyse substances related to water pollution: the immunosensor adopts electrochemical analysis (e.g. Voltammetry. Impedence spectroscopy) and screen printing. 2. Introduction - The electrochemical ampero-immunosensor and amperometer applies antigen-antibody reaction to analyse an antigen called Vitellogenin. They can detect and analyse substances causing environmental pollution. 3. Characteristics - In immunoreaction to protect the body. an antigen reacts with an antibody produced against the antigen. producing a specific complex. - The antigen-antibody reaction has high-specificity and high-sensitivity. and the immunoreaction can recognise specific antigen or antibody. - To apply the specificity of antigen-antibody reaction is innovative to the field of environmental substance analysis. - The analysing sensor applying antigen-antibody reaction can be highly competitive in market. - In order to fix reacting substance. the immunosensor develops conductive macromolecules as a material to plant antigen and antibody and combines the screen-printing method. It applies the ampeometry and impedence method. in order to analyse fishes or water environment. - Analysis using the immunosensor is handy. simple. low-cost and portable. 4. Application - Health and medical field. precision chemistry. food industry. information technology and electronics - Development of biorecepter. fixing method of bioreceptor. the selection of transducer and manufacturing of biosensor for its commercialization and integration | Evaluation & Analysis |
| 792 | Impact dust collector | Impact pulse dust collector | Hwayoung Co., Ltd. | http://www.my.netian.com/~hwayoung-co/ | 1.Outline The present dust collector generates strong pulses with air being at a lower pressure of 0.5 Kgf/cm2 such that the compressed air flows to nozzles through paths near the air tank and generates impact waves at the ends of the nozzles. being passed through a sound velocity (340 m/s). The impact waves start to distribute into filter cloth. such that they hit the back of the filter cloths to separate the dust from the filter cloths. 2. Introduction 1) The injection nozzles are placed in the compression air tank just on the filter cloths. each of which is provided with a diaphragm valve. 2) Since a large amount of air flows momentarily to the nozzles. the impact waves are sufficiently generated with the air at a low pressure of 0.5 Kgf/cm2 such that the dust accumulated on the surfaces of the filter cloths can be removed. 3) The air compression device is employed with a roots blower or a ring blower. and in case where high-pressure air has been already possessed in the plant. it is reduced in pressure by means of a pressure-reducing valve before use. 4) It is of cyclone type cylinder where the dust in the air absorbed is first separated in the cyclone part and then passes to the filter cloths. Therefore. the load of the filter cloths can be reduced to half (It is possible to have a maximum filtering speed of 6 ~ 8 m/min). 3. Characteristics 1) It has an excellent dust separating effect with the impact pluses. which enhances the filtering speed. This enables the system to be compact such that the installation area can be greatly reduced. 2) Since the air at a low pressure of 0.5 Kgf/cm2 is used for the generation of pulses. it generates less condensate water and oil when compared to the air at a high pressure of 6 ~ 7 Kgf/cm2 such that the life of the filter cloth can be further extended. 3) The dust is well separated with the strong pulses. such that the pressure loss in the filter cloths is so small that the load of a fan motor is small. Half or less reduces the amount of the compressed air for pulse consumed or less when compared to the high-pressure dust collector. such that the power cost is greatly saved. 4. Application 1) Food industries: places where grain is treated like milling. confectionery. brewing 2) Rice polishing plants. feed plants. lumber processing plants. cement industries. ink and paint industries 3) Chemical and plastic industries. mines. quarries 4) Other places where much dust is generated. | Equipment |
| 793 | Improved water treatment method | DeNiPho® method using an intermittently aerobic contact type oxidizing method | Green Engineering and Construction Co., Ltd. | http://www.greenenc.com/ | 1. Outline DeNiPho® method is an improved treatment method for removing nitrogen and phosphorus including a post-denitrifying process of fermenting organic waste materials. such as raw sludge. food wastes. and excretion and using the fermented materials as a carbon source for denitrifying reaction and an intermittently aerating process of repeating in anaerobic and aerobic conditions of a reaction tank. Furthermore. method is a composite proliferation process in which microorganisms in the biological reaction tank carry out a floating proliferation and an adsorptive proliferation of a biological film type. 2. Introduction (See fig. 1. 2) |
Technology & Process |
| 794 | Improvement of heat efficiency of sewage sludge digester gas & desulfurization technology | Improvement of heat efficiency of sewage sludge digester gas & desulfurization technology | Siwon Corporation Co., Ltd. | http://www.see1.co.kr | 1. Outline - This is a wet treatment process using swirl type. It flexibly responds to all density by automatically controlling alkali chemicals. It has excellent cost saving effect in terms of personnel cost and electricity cost due to replacement of desulfurizing agent. and is also excellent in the aspect of maintenance. 2. Introduction 3. Characteristics - Swirl washing tower that washes and absorbs H2S included in the digester gas. - It consists of separation tank for removing salt generated by reaction with H2S. desulfurizing facility consisting of facilities supplying alkali chemicals. and dehumidification facility for removing moisture included in digester gas. Desulfurizing facilities. currently being installed in sewage treatment plants. is a facility with efficiency of over 99.5% of density below 10ppm and H2S density over 2.000 ppm. - It can appropriately treat high concentration of H2S even if it flows into the facility. and has high efficiency of removal. It removes carbon dioxide(CO2). and raises methane content and the heat of digester gas. 4. Application - Desulfurization facility of sewage treatment plant or wastewater treatment plant |
Equipment |
| 795 | Improvement of Zinc Hot Dipping Process | Improvement of Zinc Hot Dipping Process | J-E TECH Co., Ltd. | http://www.j-etech.co.kr/ | 1. Outline - The Plate Bathing Hood System patented by J-E TECH which maximizes the collection of pollutants is introduced in order to achieve perfect collection of pollutants generated in a zinc plating process. The main feature of this System is to separate the treatment bath and outside air by installing an air-blocking baffle and then prevent pollutants from exhausting into the air by creating negative pressure inside the baffle with a burial-type hood duct. 2. Introduction 3. Characteristics - Collection efficiency of 95% or higher: effect of blocking outside air and exclusive collection of pollutants. - Burial of hoods and ducts: solution to the problem of damage /semi-permanent use/ maximization of baffle effects. - Linkage of baffle and safety guardrail. - Change of a collection method: 2 to 5 times extended lifespan of a filter compared to existing ones. - Improvement of working efficiency by 30%. 4. Application - Improvement of Zinc Plating Process |
Technology & Process |
| 796 | Rotary screen and screw presser | KLRS | Keulim Environment Co., Ltd. | http://www.keulim.co.kr | 1. Outline By assembling disc grids at regular intervals. treated water passes between the disc grids. and impurities are transferred to the circumferential surfaces of the disc grids and separated. The separated impurities are transferred from a screw presser to a screw. dehydrated and discharged. 2. Introduction (See Table 1. 2) 3. Characteristics 1) Prevention of deformation and corrosion by studying disc grids with STS material. 2) Increase of separation efficiency by assembling the disc grids in a concave-convexo form to increase adhesive force. 3) Convenience during transferring a conveyer due to impurities. which are easy to break after dehydration. 4. Application Treatment of sewage/wastewater | Equipment |
| 797 | Incinerated material recycling system | Environmental waste and incinerated material recycling system | Jesagi Korea Co., Ltd. | http://www.jesagi.com | 1. Outline This is technology to convert environmental wastes into stable materials and to obtain energy from by-products of the environmental wastes by using super-temperature and high-enthalpy plasma in a reduction condition. in which is short of oxygen. A reaction furnace is small and discharges exhaust materials of a small amount as an air amount necessary for combustion in a PPV process is just about 2 ~ 5% of the entire air amount. 2. Introduction(See fig. 1) 3. Characteristics (1) Treatment of waste matters of all kinds without regard to properties of environmental wastes (2) Use of small reaction furnace and exhaust gas treating device as needing air of a small amount. compared with the incineration time (3) Treated environmental wastes are converted into only two by-products(fuel gas[H2 and CO] and vitrified slag). (4) There is no discharge of pollutant materials as organic wastes are converted into fuel gas and inorganic wastes are converted into harmless slag. which can be recycled. 4. Application 1) Recycling using incinerated materials 2) Use as auxiliary substrates of road 3) Manufacture of block 4) Substitution of asphalt 5) Use for treach backfill | Equipment |
| 798 | Municipal Solid Waste Incineration Plant | Stoker Type Incineration | Halla Energy & Environment | http://www.hallasanup.com | 1. Outline - Adopts uniform mixing and agitation of wastes by the downward/upward and forward/backward movements and speed control of the grate. - Adopts the boiler's water supply temperature controlling method by installing the 3-way valve and the heat exchanger in the drum for controlling the gas temperature of boiler outlet. - Applies a heating apparatus of circulated air for protecting the fabric collector. - Employs a cooling air system for preventing from melting of the clinker on the furnace wall. - Prevents odor from emitting to atmosphere by the adoption of closed type clinker extractor. - Employs high-speed information processing and process management concentration control system by applying DCS. - Enhances the combustion efficiency and increases the flue gas retention time by adopting 2-way gas flow system with a radiation arch installed at the outlet of the combustion furnace. 2. Introduction - Specification (Busan Dadai MSW Incinerator) • Capacity : 200 ton/day X 2 (8.33 ton/hr X 2) • Incinerator type : Stoker • Start of construction : Jul.1997 • Completion date : 200 ton/day : May.2000 • Turbine generator : 1.500 Kw/h X 2 • Plant area : 64.075 ㎥ <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000035-2.JPG></center> 3. Characteristics 3-1. Air Pollution Prevention: - Hamful SOx and HCI are removed by semi-dry reactor or wet scrubber. - Harmful NOx is removed by a selective non-catalytic reduction or selective catalytic reduction. - Dust is collected by the fabric filter or electrostatic precipitater. - Dioxin is removed by activated carbon injection or selective catalytic reduction. - A pollutant measurer is installed at the stack for continuous monitoring and control. 3-2. Water pollution prevention: - Classified into organic and inorganic. waste is processed biologically. chemically and physically ib=n accordance with environment emission limit. - Some part of treated water is recirculated and reused as the process water of the incineration plant. 3-3. Order prevention: - Order is absorbed at the top of the waste bunker by forced draft fan. and combusted between 870 ~ 950℃ in the furnace. - An air curtain is installing at the waste reception hall in order to prevent from emitting to atmosphere. 3-4. Noise prevention: - Equipments witch cause loud noise are classified an disposed by room. and the walls of the building are made with sound absorbing material. 4. Application - Incineration Plant | Equipment |
| 799 | Incinerator | Medical Waste Incineration Plant | Daekyung Esco Co., Ltd | http://www.krico.co.kr/ | 1. Outline Nowadays. the Company is requesting for many proposals for Medical Waste Incineration Plant. because the international understanding of the importance for the protection against second infections from medical wastes is being widely spread. and thereby. every countries have been reinforcing their environment laws and regulation. All competent engineers and staffs of the Company are ready for assisting clients in the start of medical waste incineration business sharing all of technical and commercial information and data in house. 2. Introduction 2-1. Equipment and Machinery There are six main sections in our Plant. For The equipment and machinery of each section is as below. - Waste-Feed Installations : Overhead Crane for Waste Separation Feeding. Feeding Gate and Ram Pusher - Combustion equipment : Incinerator. Gas Combustion Chamber - Waste Heat Recovery System : Waste Heat Boiler - Ventilating system : Off Gas Duct. Fan. Stack - Ash-Discharging Devices : Ash-Discharging Pusher. Ash-Cooling Equipment - Ash-Discharging Hoist. Ash Stock. Arm roll Box - Air-Protection Installations : Semi-Dry Scrubber. Bag Filter 2-2. Process Description <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000096_1.jpg><br>Fig. 1. Process Flow Diagram</center> 2-3. Technology Transfer with Training Program The Company will provide Owner with latest technology and operational know-how for the effective management of the Plant in addition to the training of Owner's engineers and skilled workers at Plant site as well as in Korea if required. 3. Characteristics The down-draft gasification incinerator is adopted from analyzing the disadvantages of a direct combustion method and up-draft gasification incinerator-incomplete combustion and safety accidents caused by tar and condensed oil. It is well known that this down-draft gasification incinerator produces dry distillation gas from waste including high calorific value (like synthetic resin) in distillation chamber and this dry gas is uniform quality and high temperature. Dry distillation gas from dry distillation chamber and incomplete combustion gas out from moving bed stoker are burned perfectly in second and third combustion chambers More features are as follows; - Lower capital and operation cost - Occupy smaller plant space - High efficiency of combustion and heat recovery - No danger of gas explosion caused by a sudden stop - Stable operation of the air pollution control devices 4. Application - Medical waste treatment | Equipment |
| 800 | Incinerator | Waste Tires Pyrolysis Incineration Plant | Ja Yeon Science Industry, Co., Ltd. | http://www.jacarbon.com/ | 1. Outline One of the outstanding merits of this system producing pyrolytic gasification from waste tires is to use it as heat sources in industrial factories. The simplified process is like that with heat resulting from the combustion of waste tires. sludge from paper making plants. waste from leather processing plants and shoes plants and so on. Other waste heat sources can be continuously burner without additional heat sources. of course. initial firing will be made through an outside heat source. This Plant is being widely used in waste processing companies and industrial factories where heat is an energy source. Clients using our technology have achieved a considerable saving of energy costs and removed a substantial amount of waste matter. 2. Introduction 2-1. Process Flow Diagram <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000097_1.jpg></center> 2-2. Equipment and Machinery (Typical) - Pyrolysis Incinerator - Combustion Burner - Cooling Chamber - Dust Collector - Semi Dryer - Bag Filter - Stack & Structure <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000097_2.jpg></center> 2-3. Production Capacity - 150 Kg Wasted Tires /Hr 2-4. Material and Utility Consumption - 120.000 waste tires and 21.000 Liters / Year of light oil. and other utilities will be discussed during technical clarification meeting. 3. Characteristics The pyrolysis gasification system by combustion heat with little amount of air has different characteristics from conventional systems that have an outside heat source within a closed system. It can increase heat efficiency due to the absence of outside heat supply required for pyrolysis in conventional type and recovery of remaining heat. The pyrolysis gas from our system is sent by duct through an air mixing apparatus to the inside of the boiler equipped with a second combustion room. Then the excess air volume ratio is reduced by gas burner. In this section. highly efficient combustion can be achieved by holding time of the gas in combustion room. The pyrolysis incinerating system is comprised of a lifter system to transport wasted plastic and polymer materials from outside. pyrolysis pipe producing pyrolysis gas. gas transportation system. a boiler to produce steam by using the transferred gas as fuel and environment protection system. It is critical that factors be in place and functioning to control combustion and incineration. These factors are temperature. holding time and turbulence of air mixing condition. The well-adjusted and controlled combination of these three factors boosts operation efficiency. but. other scenarios decrease efficiency. It would be remarkable that when wasted plastic materials and or rubber-related materials are heated. their moisture evaporates and then. dried wastes can be burn with higher heat. This results in gasification by the pyrolysis process. with the charred remains being coverted to ash after oxidation. This process is repeated over and over. The temperature of each section differs according to the type of wasted materials used. Estimates are shown below - Below 200 ℃ in drying section - Below 700 ℃ in pyrolysis section - Below 1.000 ℃ in gasification section - Above 1.000 ℃ in combustion section It would be advisable that oil and gas produced by pyrolysis process in the absence of oxygen are good fuel with high calories. while pyrolysis gas has a low calorie rate of 3.000 Kcal/Nm3. 4. Application - Waste Processing Industries for waste tires. waste synthetic rubber. waste leather. Polymer waste. and all kinds of waste rubber and plastics. - All industrial factories using heat as an energy source can use this plant as an alternative heat source using waste rubber and plastic materials | Equipment |
반응형
'놀면서 일하기 > 창업 아이디어링 + 문서' 카테고리의 다른 글
| 환경산업 관련 제품 및 기술 목록 : 1001-1200 (0) | 2023.12.25 |
|---|---|
| 환경산업 관련 제품 및 기술 목록 : 801-1000 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 401-600 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 201-400 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 1-200 (0) | 2023.12.25 |
댓글