반응형
HDMI USB 디지털 현미경 카메라, 더블 붐 줌, 동시 초점 삼안 스테레오 현미경, 전화 수리 도구, 4K, 2K, 3.5X-90X
https://s.click.aliexpress.com/e/_DlWf3LX
328.0US $ 20% OFF|4k 2k Hdmi Usb Digital Microscope Camera 3.5x-90x Double Boom Zoom Simul Focal Trinocular Stereo Microscope Ph
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
환경산업 관련 제품 및 기술 목록 : 401-600
| NO | 제품명 | 모델명 | 회사명 | 홈페이지 | 내용 | 카테고리 |
| 401 | Data logger SW | Sowon TMS | http://www.sowontms.co.kr | 1. Outline • Data Logger in which a program to measure and control instrumentation signals. which was defined by the Ministry of Environment. and which may collect data • The value measured by the instrumentation may be converted into ASCII value and displayed on LCD 2. Introduction 14Biz-471_Data_logger_SW-1400D.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-471_Data_logger_SW-1400D.JPG'>3. Character • Frequency of data collection (A/I Board): 300 or more a second • Validation/ invalidation of transmitted data: To process on the basis of Status defined by the test method • Selection of transmission speed: 1200 ~ 9600bps • Parameter setting: communication. time. regarding calibration. matters regarding channel • COM. Port View: To verify communication conditions • Analog Input (Measuring Instrument Signal Input): Analog 4 ~ 20mA DC • Digital Input(For status): To connect up to 4 per analog channel (under correction. fault in operation. power source disconnection. under repair) • Digital Output (for Calibration Control): To connect up to 4 per analog channel (Zero. Span. Purge. Sampling. Remote) • Output Data Forwarding Address: Ministry of Environment (or FEP). Control PC • Auto Dump: Automatic transmission for data for 2 hours posterior to communication restoration 4. Application • To integrate stored measurement with digital value on I/O Board • To convert to averaged arithmetic value • To compute average oxygen concentration • To collect and process various data. such flow calculation. etc |
Evaluation & Analysis | |
| 402 | DC Junction Box | DSJ-015C | DASSTECH Co., Ltd. | http://www.dasstech.com | 1. Outline - DC Junction box is a device that access to solar cell modules which is consisted with several units by their capacities. and form a single String to supply DC voltage generated from modules to inverter. 2. Introduction 3. Characteristics - It is easy to expand input channels in accordance with the solar cell module through configuration by channel - Simplification of wiring through making it as single board - Its waterproof/thermal insulation / Vibration Isolation design as the outdoor type structure secures the reliability - The user convenience is increased by application of current direction indicating LED and safety hook for fuse replacement 4. Application - Photovoltaic Power Generation System |
Equipment |
| 403 | DECANTER | REENTEC ENG | DECANTER Decanter uses high centrifugal force to separate sludge solid and liquid. It is available to use in sludge concentration and dewatering process. FEATURE Small input of coagulant Moisture rate can be cotrolled to 68% Economical efficiency in runnig & maintanance Accurate speed control Automatic lubrication system for bearing Safety device(torque. vibration. bearing temperature) High torque & low energy Outstanding centrifugation force(Maximum 4.000G) APPLICATION Sewage. wastewater treatment plant Livestock sludge. foodwaste disposal plant Leather factory. paper factory. chemical factory Food factory. pulp factory. synthetic resin manufacturing plant. etc. | Instrument & Chemicals | ||
| 404 | High efficiency biopile process by microbial breakdown | Dream Bios Co., LTD. | 1. Characteristics - Low-cost and high efficiency purification model - Effective treatment for contaminated soil and underground water - DNAPL/ LNAPL/dissolved contaminant treatment simultaneously - The most effective purification process among In-situ process 2. Application - Oil pollutants including BTEX. PTH etc. - VOCs including TCE. PCE etc. | Technology & Process | ||
| 405 | Degassing Membrane | Degassing Membrane | GHTKOREA Co., Ltd. | http://www.ghtkorea.com | 1. Outline • It is designed based on the gas separation membrane theory and it is a high-efficiency membrane filter used to separate gases from water. 2. Introduction 14Biz-132.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-132.JPG'>3. Characteristic • Gases dissolved in water can be removed efficiently by a specially designed gas separation membrane. • Supplies water. excluding gases. easily and safely • Easy installation and requires a small installation area 4. Application • Preprocessing of EDI • Separate gases from liquid • Boiler water or biotech research laboratory • Ultrasonic cleaning and cleaning of semiconductors and super precision machines • Production of optimum semiconductor industrial water • Cleaning solution production field to clean precision parts • Hospitals. hotels. regular buildings. and the food industry |
Equipment |
| 406 | DEHASS | DEHASS | Samchully Enbio Co. Ltd. | http://www.senbio.co.kr/ | 1. Outline This DEHASS refers to a contact stabilization type nutrient removal hybrid process using suspended and attached microorganisms. The process consists of anaerobes contactor. first sedimentation pond. nitrification tank. oxygen free tank#1. intermittently aerated tank. oxygen free tank #2. re-aeration tank. and final sedimentation pond. Over 70% of organic matters are absorbed and they are used as a carbon source in an oxygen free tank in the case of denitrification and overlying water that contains considerable NH4-N in the first sedimentation pond is transferred to a nitrification tank in which concentrated nitrifiers are fixed and then are nitrificated. 2. Introduction 3. Characteristics - A technology ensuring that T-N concentration is 10mg/L or less and T-P concentration is 1.0mg/L or less in a short retention time ( within 6 hours). - An advanced wastewater treatment technology that is effective in low load wastewater whose C/N ratio is 2~3. - A technology that enables existing treatment process to be retrofitted into a high efficient nutritive salt treatment process at low cost. - Cost required to retrofit can be reduced due to a nutritive salt treatment process in existing treatment plants. - Site and operating expenses can be reduced due to shortening of HRT. - Cost required to inject an external carbon source can be reduced when treating wastewater whose C/N ratio is low. 4. Application - Advanced wastewater treatment |
Technology & Process |
| 407 | Dehydrator (Water Treatment) | Dehydrator (Water Treatment) | Vinna Macro Co., Ltd. | http://www.vinna.co.kr/ | 1. Outline • It is a dehydrator that also functions as a solid–liquid separator. 2. Introduction 14Biz-72(1).JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-72(1).JPG'>3. Character • As it rotates at a low speed and has a simple structure. issues about breaking down are reduced. • All the connection parts are made of stainless steel. • It has high dehydrating efficiency with its large pores. • The water content percentage of the separated solids can be adjusted. • Its wedge wire screen prevents clogging. 4. Application • Wash and dehydration system for recycling plants • Dehydrating livestock wastewater sludge • Dehydrating food wastewater and solids • Thickened solid–liquid separation and normal solid–liquid separation |
Eco-Friendly Products |
| 408 | Denitrification and dephosophorization | Seshinclean Co., Ltd. | http://www.seshinclean.co.kr | 1. Outline - Denitrification and dephosophorization process of Seshinclean Co.. Ltd. is advanced process. which minimizes the operation expense by saving the electricity cost and carbon sources since ANAMOX and SURAMOX reactions are added to existing process. 2. Introduction 3. Characteristics - Great denitrification ability with high concentration denitrification microorganisms in HBC tank - Minimize using amount of methane - Great computing ability in HBC tank by removing BOD and COD in pre-dephosophorization tank 4. Application - Food wastewater. pharmaceutical wastewater. fermentation wastewater. alcoholic wastewater. petroleum and chemical wastewater and wastewater and sewage water |
Technology & Process | |
| 409 | Denitrification system | SDR (Separated Denitrification Reactor) Process | ENSERVE Co., Ltd. | http://www. enserve.co.kr/ | 1. Outline This product is a pre-denitrification system to remove introduced nitrogen by nitrification and denitrification by separating a pre-denitrification tank and an endogenous denitrification tank by variably applying the number of the denitrification tanks singly or doubly according to a ratio of introduced organic matters to nitrogen concentration. 2. Introduction (See fig. 1. 2) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000294-2.jpg></center> <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000294-3.jpg></center> 3. Characteristics (1) Initial investment costs are low (Use of the existing aeration tank). (2) It has high nitrogen removal efficiency (85% or more). (3) It is low in maintenance costs (sludge producing amount and external carbon source are minimized). (4) It is easy to operate and manage (establishment of automatic control system). (5) It can do without a new site (civil engineering structures are not needed). 4. Application (1) Pharmaceutical factories and casting factories (2) Denitrification process of various kinds of water | Technology & Process |
| 410 | De-NOx SCR System for power plant | AFCU System | PANASIA Co., Ltd. | http://www.pan-asia.co.kr | 1. Outline - To process NOx contained in gas emitted from power plant 2. Introduction 3. Characteristics - Easy to install due to modulation - Quick design possible due to modulation - Minimized installation space - Verification of even spray of deoxidating agent at AIG (Ammonia Injection Grid) through CFD analysis and even distribution of deoxidating agent at catalyst 4. Application - Noise measurement between floors of apartment houses |
Technology & Process |
| 411 | De-NOx SCR System for Ship Engine | De-NOx SCR System for Ship Engine | PANASIA Co., Ltd. | http://www.pan-asia.co.kr | 1. Outline - Post-processing equipment for exhaust gas needs to be installed in ship engine from IMO Tier 3 regulation due to strengthened international marine rules. 2. Introduction 3. Characteristics - Address space limitation problem through compact design (easy to install compared to existing one) - Secure price competitiveness through equipment standardization - Design of explosion proof area equipment based on IEC regulation - Engineering design based on engine vibration - Possess know-how in ship systems 4. Application - Engine (Diesel. LNG) . Generator . Boiler |
Technology & Process |
| 412 | De-NOx SCR System for small/medium-sized combined heat & power plant | De-NOx SCR System | PANASIA Co., Ltd. | http://www.pan-asia.co.kr | 1. Outline - ‘Equipment aimed at reducing NOx emitted from power plant gas like individual combined heat power plants of ESCO business and combined heat power plants of local districts. 2. Introduction 3. Characteristics - Address space limitation problem through compact design (easy to install compared to existing one) - Secure price competitiveness through equipment standardization - Provide interlock for remote monitoring control and safety control - 2nd pollution and by-products not created 4. Application - Small-sized combined heat power plant for apartment houses - LNG boiler - Medium-sized combined heat power plant for apartment houses - Community Energy Supply System (CES) |
Technology & Process |
| 413 | De-Nox System | De-Nox System | KS Engineering Co., Ltd. | http://www.ks-engineering.co.kr/ |
High Dust Configuration
Low Dust Configuration
|
Eco-Friendly Products |
| 414 | Dense Phase Conveyor | Duk Young Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Outline A transferring system that a large amount of material can be transferred in a short time without any damage or separation through highly concentrated transfer at a low velocity 2. Introduction 3. Characteristics - Highly concentrated transfer method is applied at a low speed and raw material is transferred at a low velocity to reduce wear and tear and damage of raw material. - A large amount of raw material can be transported for long distances with the energy of small quantity. - As the amount of consumed air is possible by highly concentrated transportation. the amount of a vent filter can be reduced. 4. Application |
Equipment | |
| 415 | Density gauge | SONDAR4000 | IS Technologies Co. Ltd. | http://www.sondar.com | 1. Outline - A unlined processor concentration meter that measures concentration of sludge in the pipe using supersonic wave diminution method 2. Introduction 3. Characteristics - User can control setting range of relay and electricity output in menu - Active alarm occurrence and control in processor are possible - Instruct a concentration value using graphic LCD - Various settings using 5 KEYs are possible 4. Application - Sewage plant: raw sludge line. remaining sludge line. condensed sludge line - Water waste treatment plant: retrieved sludge line. extinguished sludge line - Chemical process. pulp paper factory. condensation process |
Equipment |
| 416 | Deodorant | Deodorant | Youngchun Chemical | http://www.chemyct.co.kr | 1. Outline • This is a biomechanically made product with bacteria and enzyme. • This environmental protection product creates a pleasant environment by putting it to malodorous places. such as waste transfer station (toilet). urinal and sewage treatment plant as well as decomposing volatile organic acids. such as ammonia. which is the major cause of odor. 2. Introduction 14Biz-109.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-109.JPG'>3. Character • Harmless biological preparation • Selectively deodorizes the odor of different organic substances • Sustainable because of the continuous growth of bacteria • Safe for surface in contact and external devices • Spore-shaped bacteria with a long life span • Double effect due to many different types of bacteria and enzymes • No secondary pollution • No harmful influence for workers or related facilities • Prolonged action by microbes with instant deodorization action • Ingredients - Essential oil: decomposes microbes (major causes of odor. such as h2s. different organic acid. urea. etc.) and converts it to harmless and eco-friendly carbon dioxide and water by flocculating odorant molecules in the bad smelling places or forming complex. - Various enzymes: specific enzymes decompose food waste and rank the materials that cause odor or the causative factors of odor. 4. Application • Malodourous locations. such as toilet. urinal. sewage treatment plant. etc. |
Eco-Friendly Products |
| 417 | Deodoring Treatment System | Deodoring Treatment System | Choil Plant Co., Ltd. | http://www.choilplant.co.kr | 1. Outline - This equipment gets rid of noxious odors in the organic gases by attaching on the surface in & outside of active carbon packed in the tower. 2. Introduction - Volatile Organic Compounds come to catalytic combustion apparatus through heat exchanger then. preheated before passing through catalyst. - VOCs are directly combustion with exhaust gas of burner to approach catalyst reacting temp. 300℃~350℃ before catalyst. VOCs oxidate on the surface of catalyst and emits heat energy. as a result. the temperature rises while VOCs are passing catalytic layer. - Hot and harmless exhausted gas through catalyst passes through the hot surface of heat exchanger and preheats cold VOCs gas. therefore. no more preheating is needed with burner and there is low to minimal consumption of fuel. - Cleaned exhausted gas is either discharged in the air or used for hot water or other process. 3. Characteristics - Various applications - Size of tower depends on site situation. efficiency is not affected - Appropriated to high capacity 4. Application - Chemical factory. gild. feed manufacturing factory. organic gas or steam discharge facilities. waste gas generating facilities (H2S. CS2. SO2. Cl2. NH2. Phenol. Ethanol. Tar) - Tender discharging gas or odor removal - Adsorbent: Active carbon. Active aluminum | Equipment |
| 418 | Deodor Technology Using RTO and CO | RTO and CD Deodor Technology | KP Chemical Co., Ltd. | http://www.kpchem.co.kr | 1. Outline By using the difference in boiling-point in polyester resin process reactor. 10-level baffle was installed in the column and E.G. (Ethylene Glycol) is cut. The E.G. is condensed and collected at the lower part of the E.G. column. and it is injected to the second reactor. E.G. in vapor form is condensed by the condenser installed at the upper part of the column and it is injected to the second condenser. Here. odor is generated from the gas as it vents the reactor to manage the internal pressure with nitrogen gas. This technology was used to improve the working condition. and prevent pollution by eliminating VOCs and odor produced from the polyester resin process. 2. Introduction 2-1 Structure of One Can Type Rotary RTO (Regenerative Thermal Oxidizer) It is made of inflow chamber where the gas passes through. separator that induces glow of gas. combustion chamber of upper part with burner. rotary wing that inducs gas located at the center of separator and inflow chamber. and operator that rotates the rotary wing at a certain speed (Fig. 1). <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=271_2.jpg></center> 2-2. Process - PET (Polyethylene Terephthalate) is a general name of high-molecular compounds where CH that forms polymer has ester coupling. and the manufacture process of PET resin can be divided into 3 processes. - First. E.G. (Ethylene Glycol) and TPA (Terephthalic Acid) carries out the first ester reaction. - Second. Oligomer made by the ester reaction is polymerized 3 times. and it produces polymer. - Third. it chips the strand form by using the polymer. - In the first and second processes. physical and chemical reactions take place. In the third process. only physical change where strand form is turned into strand takes place. 3. Characteristics 3-1. Comparison before and after installation of RTO <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=271_3.jpg></center> 3-2. Improvement effect - Improves working condition and prevents malodor - Improves the image of environment-friendliness 4. Applied field VOCs and Odor treatment plant | Technology & Process |
| 419 | Deodorization | Deodorization | YoungChang Machine Co., Ltd. | http://www.ycm.co.kr | 1. Outline - Deodorizer. 2. Introduction 3. Character 4. Application - Deodorizer |
Operating Agents |
| 420 | Deodorization equipment | Catalyst type combustion apparatus (CCS) | YOUNG ENGINEERING CO. LTD. | http://young-eng.co.kr | 1. Outline A deodorization apparatus processes volatile organic compounds (VOC) organic solvent gas. organic stink. etc. that are generating oven and chemical process such as printing. painting. coating. and the like. The equipment heats VOC gas at a temperature of about 250~400 degrees Celcius lower than a combustion temperature (750 degrees Celcius) and passes it through a catalyst layer. so that VOC gas is decomposed into carbon dioxide and vapor by means of a catalyst oxidization action. 2. Characteristics 1) High deodorization efficiency due to the use of catalyst with high activation and large surface area 2) Less secondary pollution since odor and waste gas are decomposed into carbon dioxide and vapor that are nontoxic and odorless. 3) Catalyst can be recycled after cleaning and has a very long life. 4) Low fuel consumption due to low temperature oxidization mode and high economic efficiency due to advanced heat recovery system 5) Metal catalyst is easy to handle and strong against shock. etc. due to high strength. 3. Applications Pharmaceutical factory. spices factory. food (coffee) processing. resin manufacturing and processing. enamel electrical wires. resin. rubber factory. fertilizer. feed factory. wastewater treatment. reclaimed land. chemical and petrochemical. metal coating. cans. coils. films. coatings. Gravure. offset printing. paint. ink factory. spray. and the like. | Equipment |
| 421 | Deodorization equipment technology | BC Plus bio-trickling filter system | Yuil Environmental Development Co., Ltd. | http://www.yuil21.co.kr | 1.Outline The system is a biological and chemical engineering technology that reduces the odorant components of odorant gas through the oxidization of pollutants by use of microorganisms. 2. Introduction (See fig 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000219-2.jpg></center> 3. Characteristics 1) Settlement of the problems in existing biofiltration 2) Regulation of reaction conditions 3) Optimization of removal efficiency 4) Relative simplicity of the system: High efficiency of biochemical process 5) Relatively small site area 6) One of rising next generation technologies: small area to install. and adequate to the generation sources near area of life 4. Application Area where odorant gas is generated | Technology & Process |
| 422 | Deodorization system | Deodorization using microorganism composite liquid catalyst | Environment and Life Co., Ltd. | http://www.envita.co.kr/ | 1. Outline Liquid catalyst is that stink damp (hydrogen sulfide gas) of foul smell gases is resolved in liquid and oxidized into solid sulfur by oxidation and reduction reactions of catalyst for deodorization. and the catalyst is oxidized O2 in the air. This system has been developed using an advantage that the catalyst does not cause wastewater and second pollutant materials as being operated in room temperature and pressure and reproduced and circulated by oxygen. 2. Introduction In liquid catalyst. Fe (Ⅱ)chelate becomes Fe (Ⅲ) chelate by reaction with oxygen. forms hydroxyl radical (ㆍOH) to decompose hydrogen sulfide. forms solid sulfide by reaction with Fe (Ⅲ) chelate. and then reduced to Fe (Ⅱ) chelate. The liquid catalyst oxidizes hydrogen sulfide by repeating the above process. At this time. the liquid catalyst has a disadvantage in that catalyst must be replaced as Fe chelate is decomposed by produced sulfide salt hydroxyl radical (ㆍOH). Therefore. microorganism composite liquid catalyst capable of treating hydrogen sulfide of high concentration within a short retention time by reproducing Fe (II) chelate after oxidizing hydrogen sulfide by immobilizing Thiobacillius ferrooxidans in the liquid catalyst. Pollutant materials are removed from foul smell gases. which include hydrogen sulfide. in an absorptive tower. in which microorganism are mixed. and then. non-treated pollutant materials are decomposed by microorganisms. 3. Characteristics (1) Catalyst has a semi-permanent life as repeating and circulating oxidation and reduction reactions. (2) It does not cause production of wastewater and second by-products. (3) It can utilize the existing deodorization tower by repairing and modifying it. (4) It requires a small site area as being compact. (5) It is simple in construction. and easy to operate and manage. (6) It restrains production of Fe sediment materials. (7) It is inexpensive in installation costs and maintenance costs in comparison with other methods. 4. Application (1) Waste gas treatment of chemical factories (2) Simultaneous removal of H2S and SO2 (3) Mixed foul smell including VOCs of low concentration | Equipment |
| 423 | Deodorizer | SMELL KILLER | Eco Solution Corp | http:// www.ecosol.co.kr | 1. Outline Smell Killer is new idea bad odor eliminator. which eliminates various bad odors in the living area. Just simple spray of the product will eliminate various bad odors such as waste odor. food waste odor. wastewater pipe odor. toilet odor. cigarette odor and others. 2. Introduction Smell Killer is chemically stabilizing materials based on silica as main ingredient. having high reaction property against bad odor resulting elimination of bad odor by combining with bad odor molecule and then converting into odorless molecule (See fig. 1). <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000258-2.jpg></center> <Fig 1. Principle of smell killer deodorization operation> 3. Characteristics (1) By combining bad odor molecule physically and chemically. eliminate bad odor from its source. (2) It is colorless and odorless. causing no side effects such as headache and allergy. (3) Water soluble product. No risk for explosion and fire (4) Simple spy will eliminate bad odor. Easy to use. (5) Environmentally friendly product. No 2nd phase pollution generated 4. Application (1) Odor from waste (2) Odor from toilette (3) Wastewater site. sewage disposal tank odor (4) Refrigerator food odor (5) Dog. cat. pet excrement odor (6) Cigarette odor (7) Mold odor | Eco-Friendly Products |
| 424 | Deodorizer | Disinfectant, detergent, and deodorant - 3D | Cheonsei Industry Co., Ltd. | http://www.cheonsei.co.kr | 1.Outline The product is made of BTC-2125M made by Millmaster Onyx and proved its good safety as principal materials. which is used for multipurpose deodorant that is also used both as detergent and disinfectant. 2. Introduction -Deodorant principals The source of the odor in the treatment of wastewater is hydrogen sulfide H2S. It is known that the microorganisms generating H2S by reduction of sulfur oxide are Vibrio desulfuricans. Spirium desulfuricans. and Microspira aestauri. and so on. 1) H2S H++HS- 2) HS-H2S H++HS- At that time. as the concentration of H+ increases. that is. the pH is down. H2S become generated. The product 3D acts strongly at alkalinity so that it makes the concentration of OH- increased together with the addition of EDTA. As a result. it serves to suppress the generation of H2S. 3. Characteristics 1) Detergent: It has surfactant as a main component and EDTA as additive. so that it exhibits an excellent cleaning effect in cool water. metal. and hard water. 2) Disinfectant: It has a wide range of pH and hydrophilic and hydrophobic as main components at the same time. so that it exhibits a strong degree of permeability to cell membranes of germs. Also. it is well absorbed into polluted organic substances. so that it exhibits an excellent force of disinfections. 3) Deodorant: It has an advantage that it exhibits a long period of deodorization for the odors formed in the dehydrogenation reaction of organic substances and the generation of sulfides like H2S. when compared with general counteractive and masking agents. With the ion exchange of the additive EDTA. it improves the deodorization for SH and H2S with the addition of aroma. thereby always keeping clean and fresh surrounding environment. 4. Application 1) Wastes and sewage final treatment places 2) Livestock wastewater and wastes treatment places 3) Agricultural and sea products markets. slaughterhouses. pigpens. henhouses. cowhouses 4) Leather. food. pulp. and paper manufacturing plants | Instrument & Chemicals |
| 425 | Deodorizer | Deodorizer | AMECO Environment Co., Ltd. | http://wastefree.kr/ | 1. Outline - With the inside of its deodorizer tank installed in a radial structure using a bio-ceramic filter to increases proliferation of deodorized organisms and the efficiency deodorization. the deodorizer can increase the reaction time as odor substances contact the deodorized organisms. 2. Introduction 3. Character - Airtight throughout the whole process. - Treatment of offensive odor materials like ammonia and hydrogen sulfide. - Environment-friendly and biological principles applied. - No waste water and no discharge treatment facilities 4. Application - Deodorizer |
Equipment |
| 426 | BIO-CAT | HK-BC | Hanki Industries Co., Ltd. | http://www.hanki.co.kr | 1. Outline 1) Microorganisms that oxidize and decompose odor materials and VOCs form bioflims in media that are filled in the reactor. 2) The odor materials and VOCs that are transported to BIO-CAT are adsorbed and absorbed on the surfaces of biofilms. The microorganisms decompose. by oxidation reactions. them into CO2. H2O. and materials that are harmless to human body. 2. Advantages 1) Possible to simultaneously treat odor and VOCs 2) Fast discomposing and minimization of pressure loss 3) Strong durability and low cost of maintenance 4) Maximization of removal efficiency by selecting microorganisms according to odor and VOCs materials 5) Fully automatic operation method 3. Application fields 1) Sewerage. wastewater. and night soil treatment facilities 2) Food waste treatment facilities 3) Fish and meat processing factories 4) Painting and ink processes of automobiles and electronic products 5) Manufacturing processes of solvents. adherents. and synthetic fibers 6) Plastic manufacturing processes 7) Other odor and VOCs generating sites | Equipment |
| 427 | Deodorizing Facility | Deodorizing Facility | Macroad Co., Ltd. | http://www.macgreentech.com/index.html | Aeron. heat catalyst oxidation method. improves the problems of the conventional treatment method. It has excellent economical efficiency. It treats VOCs and comprehensive odors completely. It is a method of high efficiency and low cost. Odor-causing resources are divided into two parts. natural odors by protein dissolution by microorganisms and artificial odors by sewage treatment plant. livestock facility. oil manufacturing factory. excreta treatment plant and painting facility. [ Odor treatment technology ] Odor treatment technology is divided widely into two parts. pre-treatment controlling operation condition and working condition and post-treatment managing odor controlling facility. In Korea. odor controlling technologies are absorption. adsorption. catalyst treatment and combustion method but most facilities are absorption and adsorption method. These facilities are saving the initial construction cost but the maintenance cost is increased due to the change of absorbent and it is difficult to find the changing time of microorganisms. [ Background of development ] The conventional absorption and adsorption method’s deodorizing efficiency is below 70 so it cannot meet the emission standard. The direct combustion method has demerit of high cost. AERON of Macroad Co.. Ltd. solves this demerit. It is designed that the odor should be passed through TiO2 heat catalyst oxidation facility. ion adsorption facility and water screen facility. Therefore. it can remove the odor more than 90. [ Problems of the conventional odor treatment method ] Low removal efficiency (absorption method) Producing the secondary odor (chemical washing method and microorganisms deodorizing method) Good removal efficiency but high initial facility cost (direct combustion method) Difficult maintenance (microorganisms deodorizing method and activated carbon adsorption method) [ Features of AERON deodorizer ] Excellent removal efficiency (removing complex odor and designated odor more than 90) No secondary pollution Cheap the initial facility cost (compared to the direct combustion methodo r microorganisms method) Easy maintenance and cheap maintenance cost Available to check the operation at the outside | Equipment |
| 428 | Depth Cartridge Filter | SYP | Snopex Co., Ltd. | http://www.synopex.com | 1. Outline - A SYP cartridge filter is transformed through the company’s own MeltBlown Technology. is effective in collecting pollutants and has a long product cycle since it is designed as a self-supporting structure which has filter layers and gradients that can remove more than 90% of pollutants. 2. Introduction - Filter material: 100% Polypropylene micro-fiber. - Inside diameter: 27~30mm. - External diameter: 62~65mm. - Length: 250mm. 500mm. 750mm and 1000mm. - Optimal exchange differential pressure: 2.0kg/cm2 - Maximum operation temperature: 80℃. 3. Character - Gradient structure. - Micro-fiber in a melt-Blown format. - Complete heat-bonding combination and a self- supported structure. - No adhesives and surface active agent. - Various filter grades. - Efficiency in accurate and consistent removal of particles (more than 90%). - Long product cycle of filters. 4. Application - Pharmaceutical: Production of clean water. purification of reagents and reverse osmosis pretreatment. - Photos: Film development. printing and adherence solution. - Food and beverage. - Chemical process. - Oil and gas. - Metal processing. |
Equipment |
| 429 | Depth Cartridge Filter | SYL | Synopex Co., Ltd. | http://www.synopex.com | 1. Outline - A large caliber cartridge filter manufactured by Synopex is a product produced with an application technique of the Melt- Blown Technology and it is suitable for collecting pollutants on mass scale and high capacity treatment because its collection space increases with the increase of sizes and fine PP fibers are structured as multi- fibrous layers. 2. Introduction - Filter materials: 100% Polypropylene micro-fiber. - Inside diameter: 115mm. - External diameter: 150~155mm. - Length: 750mm and 1000mm. - Optimal exchange differential pressure: 2.0kg/cm2 - Maximum operation temperatures: 80℃. 3. Character - Gradient structure. - Micro-fiber in a melt-Blown format. - Complete heat-bonding combination and a self- supported structure. - No adhesives. surface active agents. - Various filter grades. - Efficiency in accurate and consistent removal of particles (more than 90%). - Long product cycle of filters. 4. Application - Pharmaceutical: Production of clean water. purification of reagents. and reverse osmosis pretreatment. - Photos: film development printing and adherence solution. - Food and beverage - Chemical process - Oil and gas - Metal processing |
Equipment |
| 430 | Optimization of the absorption tower for Flue Gas Desulfurization (FGD) process | Optimization of the absorption tower for Flue Gas Desulfurization (FGD) process | Korea Electric Power Research Institute | http://www.kepri.re.kr | 1. Outline - The process scale needs to be elevated to 500 MW class in order to apply the process to large-size power plants in Korea and to compete with other foreign desulfurization technologies. - This technology aims to develop technologies for optimum design and operation by improving Korean style Flue Gas Desulfurization (FGD) facilities and to secure process technologies to be applied to large-capacity desulfurization facilities (above 500 MW). 2. Introduction 2-1. Complete a scale-up design variable of 500 MW Korean style Flue Gas Desulfurization - Cut down on the cost of operating through a process improvement - Complete a 500 MW elevating design variable - Analyze flue gas- flow fields 2-2. Develop Optimization technology for a Korean standard 500 MW wet Flue Gas Desulfurization facility - Develop a technology for optimum gas-liquid contacting - Develop Process Optimization technology according to loop unit - Analyze the characteristics of flue gas that has an impact on the velocity of dissolution 2-3. Provide the optimum operating technology according to various conditions of desulfurization. 3. Characteristics 3-1. Improve desulfurization rate through adding organic acid - Organic acid-additives such as DBA (dibasic acid) is used as a pH buffer of slurry inside an absorption tower and reduce liquid films-resistance of gas-liquid interface. - This enhances an absorption power of an absorption solvent by increasing the degree of alkaline and stabilizing pH of an absorption tower. 3-2. Treatment of desulfurization-wastewater using evaporation - Current evaporation vaporizes desulfurization-wastewater discharged from an absorption tower and thus reduces solids and finally recycle demi-water in the desulfurization (FGD) process. - This system. therefore. can run without discharging wastewater and enables nonflow system. 3-3. Effect of technology - Developing domestic technologies for design process. manufacturing of 500 MW flue gas desulfurization. and making inter materials of an absorption tower enabled a plan of constructing a large capacity-desulfurization facility for electric power generation. - This technology will reduce loss of foreign currency and importation of a technology and also is expected to sell in Southeast Asia. including China. 4. Application A thermal power. an industrial boiler (a large size incinerator) and flue gas Desulfurization | Technology & Process |
| 431 | Desulfurization and Denitrification Wastewater Treatment | Desulfurization and Denitrification Wastewater Treatment | Samyang Water System Co., Ltd. | http://www.syws.com | 1. Outline - This system effectively treats non-degradable components such as N-S COD. heavy metal. fluorine and calcium in wastewater discharged from flue gas desulfurizer which is produced by accumulation or interaction of SO2. heavy metal and other components. Extra process of biological nitrification-denitrification is applied when nitric components such as ammonia occur and flow in with the desulfurized wastewater. 2. Introduction 3. Character - Suspended solid (SS) and N-S COD removal - Fluorine and heavy metal removal - Calcium removal - Nitrite removal - Residual COD and SS removal - Sludge treatment - Chemicals injection 4. Application - Desulfurization and Denitrification Wastewater |
Technology & Process |
| 432 | Desulfurization equipment | Desulfurization equipment using magnesium hydroxide method | Kyunggi Engineering Co., Ltd. | http://myhome.elim.net/~kgeng1 | 1. Outline When sulfur oxide of exhaust gas is induced into an absorption tower. the exhaust gas is first cooled at an inlet. and then. sulfur oxide is removed through reaction with magnesium hydroxide in a tray inside the absorption tower. 2. Introduction(See fig 1) 3. Characteristics 1) Sox-removal efficiency more than 98% by a perfect gas-liquid contact inside the absorption tower using the specific tray 2) Low costs for equipments and operation 3) Small loss of gas pressure and easy operation 4) Simpler process than a process of lime/gypsum method. and small installation space 5) It can be used in a caustic soda process. and is 30% low in chemical cost in comparison with the caustic soda process. 6) Safety in handling of reactive chemicals 7) Perfect removal of scale 4. Application 1) General boilers for industrial use 2) Cogeneration boilers 3) Iron manufacturing equipments 4) Chemical equipments | Equipment |
| 433 | Desulfurization equipment | MORETANA | Ecovic Co., Ltd. | http://www.ecovic.co.kr | 1. Outline - Unlike packing scrubbers. this equipment doesn’t use filler material and uses precise design and manufactured perforations. A system that can achieve high absorption efficiency of dust. NOX. Sox by the turbulent liquid contact on the perforation surface due to descending circulatory water and rising gas with high flowing speed 2. Introduction 3. Characteristics - Capable of removal of dust. SOx. NOx at the same time - Fast flow speed inside tower (smaller tower size) - Unnecessary for packing - Decrease of lot area 4. Application - Desulfurization of boiler emission gas - Industry like PCB plating - Industries releasing high-concentration dust |
Technology & Process |
| 434 | Desulfurization plant | Desulfurization plant | HAE LIM ENGINEERING CO.,LTD | http://www.haelimeng.co.kr | 1. Outline - The plant perfectly eliminates sulfur oxide in exhaust gas. SO2 + 2NaOH + Na2SO4 + H2O SO2 + MG(OH)2 + 5H2O → MgSO4 + 6H2O 2. Introduction |
Equipment |
| 435 | SoyMagic cleanser | Foamless Oil-Type Kitchen Detergent | Green&Clean, Inc | http://www.soyclean.net | SoyClean(SoyMagic)-Safe : Foamless Oil-Type Kitchen Detergent SoyClean(SoyMagic)-Safe is the safest and most effective kitchen detergent for washing all your dishes and utensils. SoyClean-Safe is also perfectly safe for cleaning all your fruits and vegetables because it’s completely free of harmful materials and chemicals. SoyClean-Safe is nearly foamless and has oil—like properties – but it’s easily diluted in water so that the soapy. detergent residue that remains with most household cleaners rinses off instantly and almost completely. What’s more. SoyClean(Magic)-Safe contains no chemicals or other materials harmful to your skin and body that conventional cleaners often do. like sulphonates. phosphates. solvents. and others. And because it’s so free of harmful materials. SoyClean(Magic)-Safe is remarkably friendly to the environment. At the same time. this completely organic and natural product uses soybean particles so incredibly small that their cleansing movement on your dishes and foods is faster. more active. and more efficient than ever before possible. SoyClean(Magic)-Safe not only protects the skin from allergy and irritation. but actually moisturizes your skin as you clean as well—so there’s no need to wear rubber gloves in the kitchen ever again. |
Eco-Friendly Products |
| 436 | Developing a fine dusts collector by using ceramic cakes and its commercialization | Developing a fine dusts collector by using ceramic cakes and its commercialization | Daisung E&E Co., Ltd. | http://www.daisungee.co.kr | 1. Outline - The technology was independently developed in Korea and is expected to be a leader of related technologies in the world after it is standardized and officially certified. 2. Introduction - A fine dusts collector using ceramic cakes (a hybrid cleaning reaction system) is basically composed of a wet scrubber and a filter bag (which contains ceramic cakes). This system was developed for the first time in Korea and has completely solved the problems of the existing semi-dry methods in terms of technological and economical aspects. 3. Characteristics - Wet cleaning reactor can collect/take away dusts and wet or cohesive particles. and a wet cleaner can be utilized on the front part of filter bag. - The reactor uses its ceramic filter to concurrently remove fine dusts. dioxin and acidic gases. and is not affected by moisture and temperature. - Costs for installing and maintaining the reactor are lower than those for other systems. - The area to install it on is more compact compared to other systems. and its operation method is so simple that it will be rarely out of order. - Just a small quantity of pressure (less than 5mmAq) will be lost from the wet cleaning reactor. which can remove moisture and cohesive dusts. - The capacity of an incinerating furnace mounted with the ceramic filter can be kept consistent since the filter has no clogging problems. - A certain amount of pressure can be maintained for a long time since a weakness of a ceramic filter or the problem of quick increasing in pressure has been resolved. - Wet cleaning reactor. which is for the pretreatment of cleaning bag. does not have any scaling problems since sodium drugs are used. The clogging of nozzles has been completely resolved. a small quantity of water is used. and little wastewater is exhausted. Moreover. the reactor has a very excellent efficiency to remove acidic gases. 4. Application - Removing dioxin. dusts. harmful gases. and heavy metals: The system is applicable to all kinds of incinerating plants and resolves relevant civil complaints. - Removing cohesive dusts: The system is applicable to any place where any kind of air contaminant is exhausted. | Equipment |
| 437 | Prevent Total Hardness | PTH | BlueWater Co. Ltd. | http://www.pthkorea.com | 1. Outline PTH (Prevent Total Hardness) is the device for preventing scale & rust from formating and for dissolving of existing scale & rust. The PTH enables the following changes - Inhibition of scale (including corrosion scale) - Dissolution of existing scale & rust - Increase the cleaning power of water - Decrease the gaseous content of water - Inhibition of algae. fungus and mildew growth. 2. Introduce 2-1. Principle - The PTH is a cast product with rough surface and composed of a 12-element alloy. It is made from precious and semi-precious metals and is in reality a particles disintegrator installed in your water line. - Minerals in water are only a problem when they collect and compact when water flows through the inner core. the negative influence of water born minerals is reduced by simply eliminating the cohesion that exists between mineral particles. That is. on minerals and metals in water the PTH creates an electrostatic field and strong hydrodynamic venturi effects. inside the device. - Thus causing a disturbance in the scale formation. And significant decrease in the formation of rust. The operation is the result of changes in the structure and neutralization of the same erements that create scale & rust in the water. The conditional process of the PTH device changes the chemical composition by mechanical separation. - The principle of dissolution of existing scale & rust looks very similar to the principle of making lime cave. H2Co3 can solve CaCo3 slowly. Under natural codition. it takes uncountable time more than we imagine. The increasing ionization from inner core make accelerate the dissolution of CaCo3 |
Equipment |
| 438 | Filter Press | Low Pressure Filter Press (Full Automation) | SAMDUCK HIGH-TECH | http://www.samduckeng.co.kr | 1. Outline - Mixing tank can be filled with sludge water by automatic sensor for sludge water tank level. - Level switch of mixing tank put on the power for sludge pressurized pump. - The pressurized oil pressure cylinder pushes the filter plate. - Sludge pump begins to operate and total initial filtrate is automatically supposed to be sent to sludge water tank. - Clean filtrate is sent to filtrate tank. After completing the filtration. air is pressurized as secondary process and cake is removed by withdrawing the cylinder. - After above processes. a cleanser nozzle can operate automatically and wash the filter cloth. All above processes will be repeated after then. 2. Introduction Fig. 1. Process Fig. 2. Specification. |
Equipment |
| 439 | Dewatering machine | Dewatering machine | ARK | http://www.ar-korea.com/ | <DIV>New sludge treatment equipment excellent for strong concentrations High performance. high efficiency (sludge inflow over 15.000 mg/l) <br></DIV><DIV>RT-Type which is suitable for relatively high concentrated sludge. this type is structure with dehydrator body aggregation and mixing tank.</DIV><DIV> - RT-Type's principle is as sludge flows into the mixing tank's inlet part by sludge feed pump from the sludge storage tank and mixing with polymer. </DIV><DIV>- Sludge flowing into the bottom side of mixing tank is stirred by an agitator which is installed top of the tank. </DIV><DIV> - The aggregated sludge will be separated out as floc and remaining water. This treated floc and water enter into multi-disk type screw.</DIV> | Water Treatment |
| 440 | DHA - 100 | DHA - 100 | DONGHA Co., Ltd. | http://www.dongha.co.kr/ | 1. Outline - The system is designed to absorb and solidify moistures in the air by using coating materials applicable without the need to remove rust on the surface of metals. In addition to metal surface. it outstandingly is cohesive to such materials as wooden. concrete and glass fibers. 2. Introduction 3. Characteristics - Directly apply coating to rust or the existing harmful paints - Excel in resisting chemicals and salt water - Excel in tensile strength: 475kgs/㎠ - Excel in resisting impact - Excel in insulation - Sunlight stability - Boast 15 to 20-year coating durability 4. Application - Coating to metal surface to apply DHC-300 - Leak prevention coating - Coating to prevent rust that can arise on the metal surface - Coating designed to protect metals and concretes from acids - Internal and external side of acids. dissolvent and oil tanks - Aboveground and underground pipeline - Prevention of corrosion of a water circulation tank and a cooling tank - Paints containing copper or other toxic paint surface coating - Water-proof floor |
Equipment |
| 441 | DHB - 200 | DHB - 200 | DONGHA Co., Ltd. | http://www.dongha.co.kr/ | 1. Outline - The system can adapt to humid environment or water and may be used to make a storage container for drinking water. It excels in adhesive strength that can apply to irons. woods concretes and other various materials. When combined with non-toxic rust-proof pigments. it can directly apply to metals. 2. Introduction 3. Characteristics - Environment-friendly coating materials not containing lead and chrome. - Outstanding impact-resistance - Outstanding film flexibility - Excellent solvent resistance - Insulation - Outstanding adhesiveness - Capable of apply coating to wet surface 4. Application - Lower side of steel structures (bridge. overpass and pedestrian overpass) - Lower side of ships and transmission towers - Lower side of iron structures (coasts and oceans) - Inner side of a storage container (drinking water. industrial water. oil and chemical wastes) - Water-proof floor - Drilling ship |
Equipment |
| 442 | DHC - 300 | DHC - 300 | DONGHA Co., Ltd. | http://www.dongha.co.kr/ | 1. Outline - The system is water-soluble white-colored compound made from four different types of ceramics and serves as both a flow coater that reflects sunlight and radiant heat unlike the existing insulating coating materials and an insulating coating material that blocks the movement of heat and chilly air by creating the layer of air between coating surface and flow coater. DHC-300 0.18mm coating excels in insulating effect as similar as Glassfiber 155mm. Styrofoam 25.4mm and Polyuretan 100mm and safety against ultraviolet rays. 2. Introduction 3. Characteristics - Reflect sunlight and ultraviolet heat - Delay heat transmission (R19) - Excel in coating durability (More than 20 years) - Water resistance - Mold resistance - Fire proof-Class A - 68 percent of noise-proof - Easy to maintain 4. Application - Fire-proof insulation |
Equipment |
| 443 | DHF - 700 | DHF - 700 | DONGHA Co., Ltd. | http://www.dongha.co.kr/ | 1. Outline - The system is designed to absorb and harden moisture in the air by using the coating material developed to obviate the need for removing rust from the eroded metal surface. In addition to metal surface. the system excels in adhering to a variety of materials. such as woods. concrete and glass fibers. 2. Introduction 3. Characteristics - Able to apply coating to rust or existing harmful paint - Excellent chemical resistance and salt water resistance - Outstanding tensile strength: 475kgs/㎠ - Outstanding impact resistance - UV stability - 15 to 20 year of coating durability 4. Application - Coating under metal surface for application - Coating designed to prevent rust from the eroded metal surface - Coating designed to protect metals and concretes from acids - Internal and external side of acids. solvents and oil tanks - Above and underground pipeline - Prevention of corrosion of a water circulation tank or a cooling tank - Coating lead-contained paints or other toxic paint surface - No use in water |
Equipment |
| 444 | Diagnosis and Evaluation System | GPS-X PROGRAM | Hyundai Institute of Construction Technology | http://www.hdec.re.kr | 1. Outline Uses a GPS-X program to analyze the entire process of various sewage treatment (conventional. advanced treatment. etc.). Through it. it can accomplish an efficient operation of a sewage treatment plant and reduce the operating cost through analysis into the management of the quality of outflow water. operating condition and the cause of abnormality and countermeasure. 2. Introduction 3. Characteristics 1) Design: Efficient and economic process design 2) Prediction of water quality: Forecast of effluent water quality 3) Review problems in process and perform expected scenario 4) Need to educate and manage operators 4. Applications 1) Sewage treatment plant 2) Livestock wastewater treatment plant 3) Other sewage/wastewater treatment plant | Evaluation & Analysis |
| 445 | Diaphragm Embedded Compact Anti-Water Hammer Tank | DIA-trol | FLOWTECH Co., Ltd. | http://www.flowtech21.co.kr | 1. Outline - Compact Anti-Water Hammer Tank designed to have an enough capacity so that it can be installed in drain pipes of the building. 2. Introduction 3. Character - Maximum Working Pressure: 7.0㎏/㎠G - Maximum Shock Pressure: 17㎏/㎠G - Maximum Working Temperature: 60 ℃ - Air-charged Pressure: 3.5㎏/㎠G 4. Application - Anti-water hammer. |
Equipment |
| 446 | Diesel Particle Filter | Diesel Particle Filter | EST Co., Ltd. | http://www.estltd.co.kr | 1. Outline - This Diesel Particle Filter reduces pollutants by collecting PMs(Particulate Matters) through a filter and raising exhaust gas temperature (over 550˚) after driving for some time and burning the PMs. 2. Introduction 3. Characteristics - This product solved the problems of existing ceramic DPFs which are frequently damaged by heat. - The ceramic is finely coated on paper support unlike existing ceramic DPF which is composed of 100% ceramic. - Excellent performance that meets the EURO 6 certification. - Inexpensive price. - Excellent resistance to thermal shock because of very low coefficient of thermal expansion. 4. Application - Reducing exhaust from all machines using a diesel engine. - Diesel vehicles. forklifts. motorcycles. cultivators and ships. etc. |
Equipment |
| 447 | Smoke reduction device for diesel automobiles | Electric Heater | ILJIN ELECTRIC CO., LTD | http://www.iljinelectric.co.kr | 1. Outline The gas emitted from diesel automobiles causes serious air pollution in the metropolitan area. Especially smoke (exhaust fume) is a pollutant. which causes fatal diseases in a human body and reduces the visibility range. Therefore. the improvement of air environment has become an urgent problem upon increase in diesel automobiles. The Smoke Reduction Device is a solution to these problems. It reduces the smoke by more than 80% by continuously collecting the smoke through micro-pores of a ceramic filter. 2. Introduction The electric heater. as a device that supplies heat to oxidize the smoke collected in the filter. operates with minimum electricity under optimum operating conditions achieved by sensor and heater controller that check operating time. duration and period. The thin plate of the heater is manufactured in a corrugated shape in order to maximize the contact with the exhaust fume and minimize the energy loss upon the operation. and then the thin plates are laminated. The laminated heating element is manufactured using filler through a vacuum brazing process. In addition. the electric heater is in a segmented structure in order to minimize the energy loss. The electric current is controlled by PWM (Pulse Width Modulation). and the heater is divided into many segments and then controlled in order to be operated with the minimum energy. The electric heater monitors the pressure and temperature of the anterior and posterior part of the device in order to operate the heater segments selected by the heater controller and operation driver when an optimal level of smoke is collected. When the mixture is higher than the optimum level. the operation of the heater starts with an optimum period depending on operating conditions. and the duration of the operation is controlled by the moment when the temperature reaches to the posterior part of the filter 3. Characteristics - 50 hours of driving at Seoul 10 mode - 150 hours of driving at low temperature driving mode - Total distance at test drive: more than 30.000km * 6 of Seoul metro-buses - 3 years or 160.00km of durability guaranteed - Maximum fuel loss: less than 2% upon driving - No NOx increase - Noise reduction 4. Application - Buses - Trucks - Automobiles |
Equipment |
| 448 | Differential pressure type flow meter | WTV 1000 | Wintec Co. Ltd. | http://www.m-wintec.co.kr | 1. Outline This is an innovative differential pressure type flow meter that was developed in the 1980s by shedding an old way of thinking and employing the change of conception. The differential pressure type flow meter measures differential pressure that is generated in a cone which is installed at the center of a conduit line. Pressure loss of a differential pressure type flow meter is lower than that of other differential pressure types. A differential pressure type flow meter is applicable to gas. liquid and steam because its reliability and accuracy in a wide measurement range has been proved. The Venturi-Cone differential pressure type flow meter has a wide measurement range because a straight pipe length that is required by the Venturi-Cone differential pressure type flow meter is shorter than that of orifice or vortex flow meters by one fifth (upstream side 1~3D. downstream side 3~5D) and the eddy that is generated in flow after a fluid passes through a cone which is a fastening device is smaller than other differential pressure types and so noise that is included in differential pressure signals is little. output signals are stable. 2. Feature - Wide application (liquid. gas. steam) - Short straight pipe length(upstream 3D. downstream 5D) - Wide measurement range(10:1. Option 15:1) - Low pressure loss - Strong resistance to abrasion and corrosion - Accuracy and repeatability of measurement (accuracy ±0.5%. repeatability ±0.1%) 3. Introduction 4. Application - Measurement of flow rates |
Equipment |
| 449 | Digital Heat Meter | Digital Heat Meter | Wizit Dongdo Co., Ltd. | http://www.dongdolighting.com/ | 1. Outline - The Digital Heat Meter by Wizit Dongdo Co.. Ltd. is a product that addresses the problem of sticking of foreign substances through the operation of LC sensor detection. This Meter features a high degree of precision due to a built-in 8 bit MiCom and supports various functions of remote meter reading. 2. Introduction 3. Characteristics - No sticking of foreign substances through the operation of LC sensor detection. - Use of more than 6 years through the use of a lithium battery. - High degree of precision due to a built-in 8 bit MiCom. - Saving and retrieval of data in replacing a battery through the use of EEPROM. - Support of various functions of remote meter reading (Non-Contact Pulse. Mini-Mbus. DC-PLC). - Installation of a remote control unit. - Saving 18 months of data and meter reading by using an IR port. 4. Application - Heat Meter |
Equipment |
| 450 | Digital Manometer(built-in printer) | SDM-2 | SUNDOO Electronics Co. | http://sdtron.co.kr/english | SDM-2 is a portable & compact manometer. It is in use by airtight test in company class KGS (Korean gas safety construction). city gas supplier. etc. Measurement time of existing manometer was more than 30 minutes. but SDM-2 shortened it by just 4 minutes. It is an equipment that can measure wide and correct value having 3 sensors of low pressure/low pressure/slightly old pressure. Also. built-in printer can print out measurement result without delay. - Joint develop with KGS - Pressure test of LNG. LPG pipeline - Test of gas pressure leak(KGS. City gas supplier. terminal tube) - Built-in printer type ※ Win the grand prize in '2006 Korean technology frontier award' | Equipment |
| 451 | Digital manometer(without printer model) | SDM-L | SUNDOO Electronics Co. | http://sdtron.co.kr/english | This equipment allows simple measuring of pressure and testing airtightness (indicates initial value/ending value). The product has wide applications including broad range of measurement units at maximum 10.000 mmH2O(SDM-L) and selection of various input units. back-light functions. SDM-ALARM sounds warning once the pressure goes up or down by ±20% compared to initial pressure at the time of measuring. and it can be used for various purposes such as branching out of gas pipes or measuring pressure from gas bag. - Pressure measurement. Airtight test - Checking start/end - Effective in pressure test of gas pipes - Very small and light weight - Selective pressure scale | Equipment |
| 452 | Dipper type scum remover | Wonchang Entec Co., Ltd. | http://www.wontec.co.kr | 1. Outline & Application Dipper type scum remover is a device applied at primary and final settling tanks at water treatment equipment at sewage/wastewater treatment facilities. which is applied at rectangular shaped settling tanks. The plight attached to the chain of the main body of the device which passes the water surface. collects scum. which will be removed with dipper type scum remover which can be co-used as ideal shaft. From the ideal shaft composed of hollow double structured pipe. dipper. which is attached to the outside pipe is connected to the main part of the sludge collector to collect scum. This facility removes scum by pouring the collected scum into inside pipe. which will be emitted to the outside following the inside pipes. 2. Introduction 3. Characteristics - Do not need double-structured pipes. additional watercourse or operating labor force - Available for connected all-in-one operation with rectangular shaped non-metal chain plight sludge collector - Able to use inside pipe as scum discharging water pipe without watercourse structures - Available for continuous operation without driving sector or additional facility - Able to operate separately from sludge collector by having additional driving sector - Do not create any DEAD AREA |
Equipment | |
| 453 | Dirt disposal facility | Dirt disposal facility | Chungu E&E Co., Ltd. | http://www.cweande.co.kr | 1. Outline - Connected with a screen filtering dirt from the entering part of wastewater and sewage water treatment plants. several air vents are formed over the cylindrical inside bottom length. A separate chamber is attached in the tank reservoir formed in an integral form and makes a form connecting the inside of the tank and inside of the chamber over that length. A screw conveyer which transports sand is installed inside the above chamber. The sewage containing sand passes the screen and when it is contained in the tank. air is squirted from the nozzle and causes a vortex in the sewage. As the sewage stays in the tank for quite a long time. precipitation effect increases and sand of even small size can be treated by being precipitated. During the precipitation. this device removes sand by purifying sand by squirting air 2. Introduction 3. Characteristics - Improved sieve type of the entering part of raw water to rake type. Mass amount of disposal of raw water inflow has become possible - Following the Heibrown method and Harmann method principle. the design of the cylindrical grit separator. which its outstanding performance has been proven. has been applied - By applying the air supply system that can influence the movement and staying time of the water cylinder. entered sewage water swirled into the cylinder tank and maximized the sand deposition influx efficiency which is caused by the difference of flow velocity - Prevents accumulation of solid and sludge attached to sand due to air injection and decreases accumulation efficiency increase of sand and organics. Blocks simultaneous organics release when releasing sand and can just release sanitary sand by separation 4. Application - Pretreatment of sewage. wastewater. and excretion disposal plants - Removal of various types of sludge solids and sand |
Equipment |
| 454 | Dirt Moisture Trap (KPT - V1) | Dirt Moisture Trap (KPT - V1) | KIST Co., Ltd. | http://www.kistco.kr/ | 1. Outline - KPB - V1(Ingress Dust Fileter). in using pneumatic portable pressure calibrators. is designed to efficiently remove dusts and moistures (water) contained in compressed air that infiltrates the pressure calibrator and thereby to protect the pressure calibrator from pollutants. 2. Introduction 3. Characteristics - Long-term stability and less maintenance cost - Prevention of cross-contamination of a pressure calibrator in use - Encapsulating pollutants in the chamber of KPT-V1 before dusts and moistures arise in a pressure calibrator so that it can lead to cleansing. - No impact on the precision of calibration 4. Application - Prevention of cross-contamination of pressure calibrators |
Equipment |
| 455 | Disc type fiber filtering equipment | Disc type fiber filtering equipment | Grenex Limited. | http://www.igrenex.com | 1. Outline - It is used for the third treatment of sewage and wastewater installed at the back of activated sludge system and nitrogen-phosphorous removal process. - It is very effective to remove organic materials. phosphorous. chromaticity and precipitate by adding the chemicals. - It is available to install the filter media from the first layer to the twelfth layer and the outer side is manufactured by concrete and reinforced material. 2. Introduction 3. Characteristics - It is operated by the low pressure water head of gravity and designed to backwash automatically by water level. - The additional device is not needed because the filtration continues in the backwashing process. It is available to be operated during 24 hours. - Backwashing water amount is very small by 1 - 3% compared to the inflow water amount. - It excellently deals with the change of hydraulic load and solids load. - Naturally precipitated solids is discharged by the pump controlled by micro processor periodically. - It can save the construction cost because it reduces the construction space by 75 - 85% compared to the conventional filter. - The installation and operation are easy because it has simple structure and it is operated by automatically. - Fiber filter cloth is almost not worn out because it is pressured only at the washing process. - Maintenance cost is saved due to the long life of filter cloth. 4. Application - Sewage treatment plant - Wastewater treatment plant - Final sewage treatment plant |
Equipment |
| 456 | Discharge capacity calculating program | Discharge capacity calculating program in wastewater treatment place – WWT2000 | TO21 Co., Ltd. | http://www.to21.co.kr | 1.Outline The wastewater treatment equipment of the discharge sources as considered in the industrial places especially has various complicated processes and chemical substances that may disappear through various paths like volatility. biological decomposition. absorption. chemical reaction. and hydrolysis. So it is hard to define the discharge capacities of them individually. WWT2000 is a program that calculates the discharge capacities (atmosphere. water system. soil) of the chemical substances generated in the wastewater treatment mechanism and predicts and controls the calculated results in an effective manner. 2. Introduction and Characteristics 1) Extension of the calculation range of discharge capacity Water-soluble substances such as hydrochloric acid. sulfuric acid. hydrofluoric acid. acetic acid. ammonia. hydrogen sulfide. and so on is soluble in water and ionized. such that the discharging capacity to the air is relatively small. WWT2000 calculates an accurate discharge capacity of the chemical substances. considering the pH of the wastewater in which the chemical substances are contained and acid and base balance and solubility of the chemical substances. 2) Employment of 33 wastewater treatment devices -7 pre-process equipment: screen. grit chamber. floatation separator. flow-equalizing tank. API. covered separator. open trench. -12 primary treatment equipment: mixing tank. neutralizing tank. granular active carbon. ion exchanger. membrane permeating device. filter paper. coagulation and sedimentation basin. first sedimentation basin. second sedimentation basin. waterfall. cooling tower. and wastewater storage tank. - 14 secondary treatment equipment: active sludge. aeration active sludge. trickling filters. rotating biological contactor. lagoon. aerated lagoon. aerobic contact oxidization tank. aerobic fluidized bed reactor. anaerobic digester. anaerobic contact oxidization tank. anaerobic fluidized bed reactor. UASB. SBR. oil membrane. and other processes. 3) Convenient substance search function - WWT2000 has a function of searching the substances by using CAS number. substance names. molecular formula. etc. and builds user substance DB with commonly used substances. 4) Output of discharge capacity calculation data WWT2000 outputs the data supported by the discharge capacity calculated. 3. Application Wastewater treatment places and industrial places where wastewater is produced. | Evaluation & Analysis |
| 457 | Discharge Water filtration | Pressure-Type Filtration | Jeong Woo Environmental Technology Inc. | www.koreambr.co.kr | 1. Outline Methods reusing discharge water include the Ultrafiltration Membrane System which pumps raw water into a high-pressure vessel using a high-pressure pump and the Nano-Filtration Membrane System in addition to the Submerged Filtration System. 2. Feature - Simple system configuration - Requiring high power costs as it is operated under high pressure - Relatively high recovery ratio - 5 to 15 times booster pump capacity based on influents - Easy process automation - Requiring pre-treatment - Requiring an effective treatment as the quantity of concentrated water generated after filtration is large (20~50% based on influent) 3. Introduction 방류수: Discharge Water 물재이용수: Use of Reclaimed Water 4. Application - Facilities for reusing treated sewage water and waste water |
Technology & Process |
| 458 | Dissolved oxygen measuring system | Continuous respiration rate measurer | Environsoft Co., Ltd. | http://www.environsoft.com/ | 1. Outline This product is to measure induced DO and discharged DO with a DO electrode in turn by changing an induced direction of a sample for a predetermined period using a flow controller. and to calculate load of organic matters and content of toxic materials by dissolved oxygen amount consumed during a stay of the active sludge sample in a respiration chamber. Biological oxygen demand (BOD) can be measured by measuring induced DO and discharged DO in the respiration chamber. to which a predetermined flux is supplied. as respiration rate. substrate concentration and concentration of dissolved oxygen are linked with each other. 2. Introduction (see fig. 1) |
Equipment |
| 459 | Dissolved Oxygen Supply System | Oxus E&C Inc. | http://www.o2mos.co.kr | 1. Outline • The Dissolved Oxygen Supply System is a high-purity oxygen generator and high-efficiency gas dissolver that controls dissolved oxygen. • It contains a high-purity oxygen generator. a high-efficiency gas dissolver. a dissolving pump. and a controller. • It is used by controlling the required dissolved oxygen (DO) value and oxygen feed rate. 2. Introduction 14Biz-430_Dissolved_Oxygen_Supply_System.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-430_Dissolved_Oxygen_Supply_System.jpg'>3. Characteristics • All-in-one structure (easy operation) • Durability and safe usability • Convenient system operation 4. Applications • Polluted water that generates odor • Supplies oxygen to places where biological growth slows down and animals die |
Evaluation & Analysis | |
| 460 | Diverter Valve | Duk Young Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Introduction 2. Characteristics - Unlike 3-way valve that loss of pressure occurs considerably in transferring powder due to the diameter of a disk. as the bending radius of diverter valve is large. loss of pressure is little. - Suitable for transferring the raw material of foodstuff (Permitted by FDA) 3. Application - Pneumatic system transferring line - Hopper or silo line |
Equipment | |
| 461 | DJSMP | DJSMP | DJ Chemicals Co. Ltd | www.djgroup.co.kr | 1. Outline - DJSMP Engine Oil is a totally new concept of metal ion coating agents in physical chemistry. which dramatically reduces a frictional force and maximizes the effect of lubrication by creating a metal ion coating screen much harder and smoother than that of pre-treatment metals after penetrating into fine pores on the surface of the metal and combining with metal molecules. 2. Introduction 3. Characteristics - Reduce air pollution by cutting exhausted gas - Contribute to environmental protection by reducing waste oil - Reduce environmental pollution and costs by extending the exchange cycle of consumables - Prolong the life cycle of vehicles by improving the effect of lubrication - Save fuel costs with a fuel saving effect 4. Application - Engine oil | Equipment |
| 462 | DKA series metering(dosing) pump/High pressure plunger metering pump | DKA series metering(dosing) pump/High pressure plunger metering pump | Dong-il M.T Co.,Ltd. | www.dongilmt.com | <!--StartFragment--><div class=0 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;><!--StartFragment--><div class=0 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;>This product is used in extremely high pressure. The operating range of pressure is from 15kg/cm2 to 200kg/cm2. It designed to operate in high pressure. so that it has good life by long operation. The motor is 3 phase. 220/380v. The type is plunger metering pump. According to fluid type. material of head can be changed such as SUS304. 316. The range of capacity is from 25cc/min to 520 cc/min. but attach the head one more in parallel. capacity might be double.</span></div><div class=0 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;></span> </div><div class=0 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;><!--StartFragment--><DIV class=0 style=letter-spacing: 0pt; -ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;>Features:</span></DIV><DIV class=0 style=letter-spacing: 0pt; -ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;>1) Plunger type pump</span></DIV><DIV class=0 style=letter-spacing: 0pt; -ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;>2) It works in high pressure(15kg/cm2 ~ 200kg/cm2)</span></DIV><DIV class=0 style=letter-spacing: 0pt; -ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;>3) it has good life by long operation.</span></DIV><DIV class=0 style=letter-spacing: 0pt; -ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;>4) It is possible to attach pump head in parallel. so that the capacity is double. It can be overcome the limit maximum capacity.</span></DIV><DIV class=0 style=-ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;>5) It is possible to adjust capacity automatically by attaching SERVO UNIT which gets information from PH meter.</span></DIV><DIV class=0 style=-ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;></span> </DIV><DIV class=0 style=-ms-text-autospace:; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt;></span> </DIV></span></div></span></div> | Water Treatment |
| 463 | DMPure BNR Process | DMPure BNR Process | DM Puretech Co., Ltd. | http://www.dmpt.co.kr | 1. Outline • It is an advanced biological treatment process in which the number of nitrifying bacteria increases to maximize the nitrification efficiency. which results in a high removal rate of organic and nutrient materials. by culturing the nitrifying bacteria in the intermittent aeration-type contact oxidation tank filled with DM media. in which nitrifying bacteria are immobilized. and by distributing them. 2. Introduction 14Biz-40.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-40.jpg'>3. Character • Maximizes nitrogen removal efficiency • The oxidation tank is filled with DM media. in which nitrifying bacteria are immobilized. • Cultures and distributes nitrifying bacteria. • Easy to maintain • Has a network with remote sensing and control. • Has an automation system that controls operation and manages data. • Reduces surplus sludge • Flexibly responds to loading change. 4. Application • Organic materials removal • Nutrient materials removal • Advanced biological treatment process • Nitrogen removal |
Technology & Process |
| 464 | DMPure BNR Process + DM Bio-Filter | DMPure BNR Process + DM Bio-Filter | DM Puretech Co., Ltd. | http://www.dmpt.co.kr | 1. Outline - By culturing the nitrifying bacteria in the intermittent aeration-type contact oxidation tank which is filled with DM media and distributing. the number of nitrifying bacteria increases to maximize the nitrification efficiency and the removal rate of the organic materials and nutrient materials. By contacting the rear area with the highly-activated sulfer-denitrifying bacteria with the waste water. it induces oxidation of the sulfer and sulfer compound. By using the energy produced from here. it converts the NO3-N to N2 to discharge it into the air and to remove the nitrogen in the water. 2. Introduction 3. Characteristics - With the use of intermittent aeration process. it does not require anoxic reactor that the treatment time and cost are saved. - By filling the 10% of the media in the intermittent aerator. the treatment ratio increases. With the use of the denitrifying reactor. it increases the treatment efficiency for T-N. - By setting the flow of the remained sludge which flows in the nitrifying bacteria cultivator to 1~3% of the volume of the inflow and decomposing the sludge through expiration or intermittent aeration under the temperature 25~50℃. they can be used as substrates to increase the nitrification rate. - By treating the waste water which passed intermittent aerator by post-processing within the independent denitrifying reactor. T-N is treated by less than 5㎎/L during summer and less than 20㎎/L during winter to satisfy the water quality requirements. 4. Application - Advanced treatment facility |
Technology & Process |
| 465 | DO meter (DDM-10) | DO meter (DDM-10) | DIK Co., Ltd. | http://www.instrument.co.kr | 1. Outline The present meter is a dissolved oxygen meter that is designed to have a high accuracy on the basis on an advanced measuring technique. It is widely used for measuring DO. SAT ratio. and so on. and exerts a stable performance in such the fields of various research institutes. mining and manufacturing industries. agriculture and forestry industries and marine product industries that need a high degree of measuring accuracy. 2. Introduction(See table 1) <Table 1> 3. Characteristics 1) One-touch calibration giving advantages in the site - Automatic air calibration and zero/span-drift calibration. 2) Automatic stability discriminating function 3) Measurement of a degree of DO saturation - Measuring the DO in the water and the degree of DO saturation as a ratio to the concentration with respect to saturation of 100 %. - Having an air pressure adjustment function that conducts an accurate air calibration on highland. - Automatic air pressure calibration. based upon the air pressure set upon air calibration and zero/span-drift calibration. 4) Temperature display - As a temperature is displayed on the same screen. it does not need to measure the temperature. 5) Auto power off function - When it is not operated for about 30 minutes. it powers off automatically. which prevents the power from being unnecessarily consumed. 6) Auto temperature compensation - The measured value of the liquid checked is automatically compensated in the temperature. which eliminates the possibility of generating an error due to the temperature. 4. Application Wastewater treatment plants. sewage water treatment plants. purified water treatment plants. nutricultural rooms. fish farms. various kinds of fields related to water quality management. various kinds of laboratories | Equipment |
| 466 | DONGIL Precoat Filter System | DONGIL Chemical Inc. | http://www.dongilchem.com | 1. Outline • DONG IL Precoat Filter System circulates a solution containing diatomite. coating medium. cellulose. and activated carbon to filter elements; forms a precoating layer on the outer wall of filter element; and passes it to remove fine particles with a size of 0.5㎛ or less completely. 2. Introduction 14Biz-440_DONG_IL_Precoat_Filter_System.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-440_DONG_IL_Precoat_Filter_System.jpg'>3. Characteristics • Maximizes treatment efficiency by instant air-water back washing • Precision filtration of 0.5-㎛ fine particles • Semi permanent use of the filter cloth without exchanging the filter element • Minimizes operation and maintenance cost by minimizing undiluted solution loss • Small installation space due to its compact size • Maximizes treatment efficiency by full automation and perfect back washing • Maximizes removal efficiency of ss. cod. turbidity. colon bacillus. yeast fungus 4. Applications • Tunnel construction. sewage and wastewater filtration. automatic car wash of gas station • Temporary filtration plant and removal filtration of colon bacillus and turbidity • Swimming pool water circulation filtration. industrial water. and recycling of radiator flux circulating liquid |
Technology & Process | |
| 467 | Dosimeter (Workplace Noise Monitoring) | The EdgeTM | Kineq Tech Corporation | http://www.kineqt.com | 1. Outline This cable-free. wireless Noise Dosimeter is light-weighted and has an ergonomic design which does not interrupt workers during their job. This product is thin and weighs 70.8g and naturally hugs the shoulder. This product has improved the convenience for a monitor as it minimizes inconvenience of its wearer during working hours and features easy downloading and convenient charging. 2. Introduction 3. Characteristics - Convenient wireless design that does not require a microphone cable and other interfering cables - The thin. hard and compact design offers superior comfort as it can be attached along the shoulder line - Long life with a rechargeable lithium polymer battery - Fast and convenient charging via the EdgeDock docking station and downloading data to PC - Downloading. analysis and management of data via QuestSuite Professional II (Software) 4. Application - Noise Measurement |
Equipment |
| 468 | Double piping/sump | Dongmyung Ent. Co.,Ltd. | http://www.dm-ent.co.kr/ | 1. Outline It is not easily corroded or transformed piping with complicated structure and provides authentic products with cheap price by cooperating OPW as monopoly supply company. 2. Introduction 3. Characteristics - No connections in the pipes that there is no possibility of leaking. - It is semi-permanent that can be used for 20 - 30 years. - Small installment area for small gas station - Stable and elastic system that is not easily transformed or damaged 4. Application - Piping |
Equipment | |
| 469 | Dr, BoomerangAutomatic recycler | Dr, BoomerangAutomatic recycler | ECOSAVE | <DIV>Dr. BoomerangAutomatic recycler for can and PET bottlePatent No : 10-0895871Resource Recycle RVM EcoRobot. Dr. BoomerangEcoRobot Dr. Boomerang is the ‘Resource Recycle’ type eco-friendly machine that designed to automaticallycollect the cans and PET bottles. reducing the social cost and time for its recycling. and rewards users with mileage points<br> (OK Cashbag. transportation card).</DIV><DIV> </DIV><DIV>•Networked via wire/wireless internet<br>for real time information transmission<br>• Magnetic card reader for<br>membership card<br>• Receipt with<br>- Credit points<br>- Coupon<br>- Commercial ad<br>• Collect bin<br>- 55 liter (14.5 Gal)<br>- 350 cans and<br>120 plastic bottles<br>• Eject door for<br>unidentified object<br>• 17” LCD Monitor for<br>- Commercial ad<br>- Display reduced amount of CO2<br>- On board diagnostics<br>- Motion detector activates screen<br>and voice announcement<br>• Bar code scan - Search<br>Database - Retrieve info<br>• Human Body Sensing<br>• Motor driven multi-comprescompression<br>module: 30 pieces/min</DIV> | Waste Management | |
| 470 | Drag Trowel Lining Method | Drag Trowel Lining Method | JUNG ANG Corporation | http://www.ja21c.com | 1. Outline - In case that the caliber of a rehabilitation pipe is within Ø100 mm∼Ø500 mm. the injection head of a ceramic mortar which is operated by high pressure air and Drag Trowel as a plastering iron for plastering treatment are used in the process of this technology called Ceramic Mortar Lining. 2. Introduction 3. Character - The ceramic mortar spray head which is operated by high pressure air is operated by receiving high pressure air which is normally more than 7 kgf/㎠ through an air hose and this air serves as a power source for the spray head which continuously supplies ceramic mortar and sprays the mortar in all directions. - The thickness of ceramic mortar layer sprayed into the inside of a deteriorated pipe is even but the surface shows a uneven and coarse condition because ceramic mortar is sprayed in all directions through a spray head as high pressure air is supplied to the spray head at constant pressure in a compressor and the air reverses the spray head at constant speed. - Drag Trowel as a plastering iron is connected to the rear of the ceramic mortar spray head operated by air and this Drag Trowel smoothens the pipe’s surface which remains in uneven and coarse conditions and forms new ceramic mortar lining in the inside of the rehabilitated pipe which improves adhesive power between the surface of the rehabilitation pipe and ceramic mortar. 4. Application - Drag Trowel Lining Method. |
Equipment |
| 471 | Drain Inlet Trap | Drain Inlet Trap | Samjin V&P Co., Ltd. | http://www.sjvp.co.kr | 1. Outline - Drain Inlet Trap. 2. Introduction 3. Character - Durability: Superior durability due to the reinforced cold/shock/chemical resistances. - Adjustability: The height of the bottom surface is adjustable. Excellent & easy fitting by using the movable U- shaped bent pipes. -Functionality: It is the nation’s first to adopt the U-shaped bent pipe and the lid with rubber-ring.Maintenance is convenient as the product has a lightweight lid with a handle grip. The injection-molding manufacturing process makes the product’s inner surface smooth. and therefore. residue do not remain. and the increased conveyance rate as a result. 4. Application - Household drain & sewage. |
Equipment |
| 472 | Drainage pump | Drainage pump | Shinshin Pump Co., Ltd. | http://www.shinshinpump.co.kr | 1. Outline - Drainage pumps for civil engineering works. 2. Introduction 3. Character - Sealing ability of this product is greater than that of other products by three times by using a best mechanical seal. - 5.5KW or higher is designed with non-pressure. 4. Application - Drainage for construction works - Urgent drainage for movement - Drainage of water and wastewater - Tunnel construction - Manufacture of wheel washers |
Equipment |
| 473 | Dregassing Membrane | Dregassing Membrane | GHT Korea Co., Ltd. | http://www.ghtkorea.com | 1. Outline - Effectively remove dissolved gas from water with a uniquely designed gas separating membrane. – Designed based on the gas separating membrane theory. this X50 / 40 type membrane shows a high performance in separating gas from water. - Able to easily and safely supply water not containing gas. allow for easy installation and has a small installation space. 2. Introduction 3. Character - Size of particle : < 5 ㎛ - Tubidity : <1 NTU - pH : 1 ~ 14 - Temperature : 1 ~ 40℃ - Working Pressure : 0.03 ~ 0.15 MPa - Water Under Pressure 4. Application - EDI pretreatment - Gas separation from liquid - Boiler water - Semiconductor industrial water - Medical industry - Ultrasonic cleaning |
Equipment |
| 474 | In-Line Link Conveyor System | In-Line Link Conveyor System | HANBEET ENVIRO ENGINEERING Co., Ltd. | http://www.hanbeet.com | 1. Outline - Sediments. impurities and dried cake from environment facilities produce foul odor and dusts from the generation and conveyance process causing the poor working condition and civil complaints. - The main purpose of the system is to move the wastes from different treatment plants to storage container of treatment plants or storage hopper. - Since it has conveyor. cleaner and dryer in one unit so it does not produce any odor or dusts. It also reduces moisture content so it simplified the final process such as incineration and storage. 2. Introduction 2-1. Principle of technique - The principle of this technique is that the link chain and blade slide in the round type pipe are sliding. and repeating the input and discharge of wastes with input hopper and discharge hopper. - The pipe laying is 3-dimensional so it can optimize the area and space depending on the site. It is operated by sprocket wheel connected to the motor. rotating the link chain continuously. - There are tension controller that controls the tension of chain. and spray-type cleaning device that removes the odor. - The drier that reduces the moisture content uses the natural dehydration method that discharges moisture from the pipe. and the hot wind dehydration that evaporates moisture by supplying hot air. - The odor and vapor are discharged to the outlet. and when necessary Bio filter can be installed to reduce the odor. |
Equipment |
| 475 | Drinking Water Quality Monitoring System | Technology & Environment Corp. | http://www.watersensor.co.kr | 1. Outline • Drinking Water Quality Monitoring System is a smart meter to measure the data of drinking water conveniently. economically. and accurately. • Various aspects can be measured by one main body (temperature. residual chlorine. DO. pH level. and conductivity). 2. Introduction 14Biz-477_Drinking_Water_Quality_Monitoring_System.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-477_Drinking_Water_Quality_Monitoring_System.jpg'>3. Characteristics • It can be deposited directly in the water tank and does not cause secondary pollutants during measurement. • Each measuring item compensates temperature and conductivity automatically to provide convenience and accuracy. • Easy system integration by a supporting diverse output system • It can conduct measurement even without using separate chemicals. • It can be easily maintained and requires low maintenance fees. 4. Application • Water supply filter beds • Water reservoir booster stations • Faucets • Pipe network management |
Technology & Process | |
| 476 | Drinking water sterilization device | AOP sterilization device | Hanilest Co., Ltd. | http://www.hanilest.com | 1. Outline - It means the innovative new technology of oxidation of several types of organics by generating intermediate material called OH RADICAL - If ultraviolet rays of 254.7mm wavelength and ozone generated waves of 184.9mm is generated at the same time to a discharge lamp. large amount of OH RADICAL is generated for oxidation in the process of photolysis while oxygen(O₂) in the air is combined 2. Introduction 3. Characteristics - By the ozone generation by 184.9mm. toxicity or NOx different from the ozone generator isn’t generated so it is very safe - Sterilization is 10~10² times faster compared to ozone generator and doesn’t leave toxicity - Application is convenient and is very economically feasible because of long life - Because ozone is highly absorbent to ultraviolet ray energy. it promotes the photolysis of ozone and therefore very efficiently disposes - Because it is a physical disposal method without artificial chemical injection. it is wide in application of water treatment and removing bacteria 4. Application - Pharmaceutical companies. soft drink plants. agricultural plants. horticulture cultivation. non-agricultural cultivation. agricultural storage. textile mills. dyeing factories (silk). electronic industries. hotels. food manufacturing and processing companies. hospitals. apartment complexes. broadcasting stations. schools. office buildings and etc. |
Equipment |
| 477 | Drum screen | Drum screen | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - Drum screen is a continuous screen which discharges raw water that flows in through an inflow header and is supplied into a drum by using the screen and discharges concomitants which are filtered by using a screw exhaust valve. 2. Introduction 3. Characteristics 4. Application - Recovery of textile materials in pulp and paper mills - Pretreatment of wastewater generated in a slaughterhouse and fish and meat processing plants - Pretreatment of wastewater generated in a food processing plant such as vegetable processing plants. milk processing plants and alcohol processing plants - Pretreatment and first screening process in urban water ㆍwastewater treatment plants - Removal of scum and excess sludge of the firstㆍsecond setting tanks |
Equipment |
| 478 | Drum Screen | Drum Screen | TAEKYUNG Co., Ltd. | http://www.tknt.co.kr/ | 1. Outline • The main liquid that flows into the header softly overflows on the walls arranged on both sides of head box. The liquid overflow drops down directly and vertically through the screen slots right inside of the drum. • Once the solids contained in the water are filtrated and collected by turning around the screen’s surface. they are dehydrated and slowly pushed out to the contrary part of the head through the extracting board. which is arranged in spiral shape on the screen. 2. Introduction 14Biz-51.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-51.JPG'>3. Character • Enhances the pulp capacity • Enhances the capacity to collect the raw fiber materials from paper factories • Enhances the dehydrator capacity of paper factories 4. Application • Treatment of the shower water from meat processing plants • Pretreatment of wastewater from poultry. fish. and meat processing • Pretreatment of wastewater from leather factories • Pretreatment of wastewater from vegetables. dairy products. and other food factories • Treatment of domestic wastewater • Solid/liquid separation of paint sludge (paint factory) • Catalyst contact and separation process of textile and petrochemistry plants • Urban water supply and drainage pretreatment and initial screening process • Prevention of clogging in primary and secondary settling tanks • Pretreatment of wastewater from poultry and butchery processing (night soil treatment) |
Eco-Friendly Products |
| 479 | Drum screen-Screw press separator | KUKJAE Environmental Technology CO.,LTD. | 1. Introduction One of the main products in our separator line. the drum screen / screw press large volume separator uses the PAN (German) wedge wire screen and BAUER (Austrian) which are widely recognized in the large volume separator market for livestock waste. It is an upgraded large volume separator unlike the first stage screw press. It has two stages (first stage drum screen. second stage screw press) with a large scope of application (pigs. chicken. cows. etc.). capable of processing a maximum of 20 tons per hour. The second stage screw press. a core technology. has adopted an upgraded and more advanced wedge wire screen compared to existing wedge wires. which prevent the occurrence of A/S. Its automated water level sensor fundamentally blocks the leakage of waste during operation. In addition. its automated cleaning device automatically cleans using water even after operation. reducing clogging (blocking) of large volume separators. This immediately addresses the problems of maintenance and A/S. .JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/11(1).JPG'>2. Features - Volume processing of 20 tons per hour - Solids dewatering moisture content of 70-73% - Solids dewatering recovery of 20-25% - Pollution prevention sensor to address secondary pollution - Easy to manage self-cleaning glass mounted device - 6 Chemical-free. excellent for recycling livestock manure - 7 No vibration. no noise. no odor |
Equipment | ||
| 480 | Drum Screw Screen | Drum Screw Screen | Jeil Machinery Co. Ltd. | http://www.jim21.co.kr | 1. Outline • The wastewater is filtered in slots of rotating drum. The impurities on the slots are separated. transferred through a shaftless spiral screw. dehydrated. and removed. • As the drum screen and screw screen can be operated at the same time. it is economical and efficient. 2. Introduction 14Biz-16.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-16.JPG'>3. Character • It uses a micro wood wedge bar and punching sheet: 0.5–5 mm. • It uses the screen drum rotating method. • It uses steel tanks and concrete channels (optional). • It has a reduced weight because of compression and dehydration. • It is economical. 4. Application • Preprocess sewage and wastewater • Remove animal night soil • Remove impurities from domestic wastewater • Remove impurities from city sewage • Remove impurities from industrial wastewater • Remove impurities from reused water |
Eco-Friendly Products |
| 481 | Dryer TEDS-2000 | TSK Water Co., Ltd | http://www.tskwater.com | 1. Outline • Eco-friendly drier to reduce emission of the secondary pollutants (Dust. CO. CO2. NOx. SOx) using electric energy only • Technology which receives the New Technology Certification from the Ministry of Environment 2. Introduction 14Biz-454_Dryer_TEDS-2000.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-454_Dryer_TEDS-2000.jpg'>3. Character • To heat the inside of sludge by microwave and the surface of sludge by near infrared ray • To evenly dry sludge by constantly maintaining illumination of microwave and near infrared ray as sludge is transferred and stirred by screw conveyor with agitator within the dryer • To reduce the secondary pollution using electric energy other than fossil fuel • To reduce disposal costs according to reduction rate (70% or more) as economic and compact sludge reduction technology • To be able to diversify source of demands for recycling as various target moisture content may be set and achieved • To prevent air pollution by collect and treat odor within generation source. which is generated by the treatment • To reduce environmental loads as an sanitary and eco-friendly sludge recycling technology 4. Application • Sludge reduction • Joint research on and new market exploitation for recycling and molding through sludge drying |
Recyling | |
| 482 | DS Eco-Tech | DS Eco-Tech | Daesung Engineering Corp | http://www.dseco.co.kr | 1. Outline • It is a method for ecosystem restoration and slope revegetation. which is used to prevent the erosion of deteriorated slopes and make them blend in well with the surroundings. • When there is a risk of falling rocks from slopes. the slopes can be paved with a vegetation-base mixed soil to form a hard pan. Planting soil. which contains organic soil. biodegradable fiber. and seeds. is then added to the pan in order to create a germinative layer. • As it uses mixed soil with which microbial biodegradation occurs. it has a high nutrient-holding capacity. thus resulting in permanent greening. • By using this method. a deteriorated roadside landscape can be naturally restored because it can create an ideal vegetation environment that will prevent the slopes from sweeping and the rocks from falling. 2. Introduction 14Biz-96.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-96.JPG'>3. Character • It has a high nutrient- and water-holding capacity as well as air-permeability. • It can be used for greening hard rocks. soft rocks. rock-weathered areas. and dry and barren lands. • It encourages a high germination and growth rate for plants. • It prevents the loss of attached soil. • It restricts the occurrence of scour phenomenon. • It can highly stabilize slopes. • It has a high success rate of rock greening. • It can create the most suitable environment for plants. which will emerge after the construction. 4. Application • Landscape and vegetation facilities • Environment ecological restoration works • Grouting works |
Equipment |
| 483 | DUCT | Seah Green Tech Co., Ltd. | http://www.iseah.co.kr/ | 1. Introduction 2. Characteristics - This system is economical and constructed inside that minimizes the pressure loss. 3. Application - Semi-conductor. EXHAUST DUCT. General chemistry industry. petroleum industry. food industry. fertilizer industry. transfer polluted gas from sewage water plant and others |
Equipment | |
| 484 | Ductile Cast Iron Pipe | Ductile Cast Iron Pipe | Shin An Cast Iron Co,Ltd | http://www.shinanpipe.co.kr | 1. Outline - Cast-iron pipe. bent tube. socket : A cast-iron pipe is considered more applicable than any pipe of other materials when it comes to water supply. Under more demanding conditions. however. such as a high load of displacement. considerable expansion. or displacement to high lands or buildings. a cast-iron pipe needs to be equipped with such durability. which is hard to achieve by existing ordinary cast-iron pipes technically and financially. These problems are thoroughly cleared up by Ductile Cast Iron Pipes with superior deliverability compared to pipes of gray cast iron. 2. Introduction 3. Character - No need for a hole for bolt. - More durability of exterior angle on the socket. - Pressure concentrates on the center when connected. for more endurance. - Pressing wheel: Slightly U-shaped to increase solidity. Covering bolt connection for protection from corrosion and securing the stability of connected parts. - Bolt head: Finished in hanger loops for more durability even in connection work or water flow. - Removal of bolt holes in socket: No need to match the bolt hole and pressing wheel. Rapid joining in bedrock or underwater. - Adjustability of pipe angle before bolting: Discounting effect on bent tubes. Convenient working condition in narrow site or city area with many other underground elements. Free of risk of having flange damaged during transportation in storage or while working. Cost reduction on pipe connection. 4. Application - Water supply pipes. - Sewerage pipes. - Other water pipe usage |
Equipment |
| 485 | Ductile Cast Iron Pipes | Ductile Cast Iron Pipes | Korea Cast Iron Pipe Ind. Co., Ltd. | http://www.kcip.co.kr/ | 1. Outline - Ductile cast iron pipes. straight pipes and curved pipes - Cast iron pipes are suitable for the waterworks and sewerage compare with the others but it reaches the limit. Today. it can’t meet the technical and economic conditions by conventional cast iron pipes because they have to be used under the severe conditions such as large quantity of discharging. great expansion. long distance supplying. hilly sections supplying and skyscraper supplying. Fortunately. the Ductile Cast Iron Pipes can solve the problems because it has an excellent performance compared with the gray cast iron. 2. Introduction 3. Character 4. Application - Pipes for waterworks and sewerage |
Equipment |
| 486 | Dumping Station | Semi-automatic Bag Emptying Machine | Duk Young Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Outline - When the worker puts the bag with the door open. it separates the belt and raw materials. 2. Introduction 3. Characteristics - It goes into Hopper or mixer - It is installed on the upper part of pressure carrier to silo or hopper 4. Application - Dumping Station |
Equipment |
| 487 | Scrubber | Packed Tower Scrubber | SAMDUCK HIGH-TECH | http://www.samduckeng.co.kr | 1. Outline This facility is for collection and removing the hazardous particles (fume. mist) in the air by the principles of absorption. collision and diffusion of delicate particles and hazardous gas. A general absorbent can improve absorption by choosing solvents according to cleanser. alkalinity and solute. PACKED TOWER reinforces exclusion effect. since it has pall ring for packing and then contacting interval between cleanser and hazardous gas is extended. 2. Introduction 2-1. Type - PACKED TOWER SCRUBBER - VENTURI SCRUBBER - CYCLONE SCRUBBER - SPRAY TOWER - ORIFICE SCRUBBER <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000045_2.jpg><br>Fig. 1. Process.<br></center> 3. Characteristics - Harmful gas and dust can be removed at the same time. - high temperature exhaust gas can be treated easily. - It has great efficiency for collecting extremely delicate particles. - structures are simple and fixed area for the gas is a little. - Operating is simple and continuous operation is possible. Temperature. humidity and gas type can not influence of this facility. 4. Application - Metal or nonmetal furmace - The surface treatment equipment - Hamfulness gas exhaust equipment - Chemical plant - Desulfurization equipment and trash burner | Equipment |
| 488 | Dust and toxic gas treatment facility | Bag Filter | Sejin Environment Co., Ltd | http://www.sejinenv.com | 1. Outline - This facility is a dust collection facility with best performance among various dust collectors which do not need additional wastewater treatment facility as it uses dehydrating collection method by adding Ca(OH) ₂and Active Carbon for neutralization of dust. HF. HCI. Sox. and DIOXIN included in combustion exhaust gases generated from various process emission sources. 2. Introduction 3. Characteristics - High collection efficiency of particulate matters - Able to collect various types of dust - Able to treat various volumes - Appropriate for highly concentrated dust treatment - Convenient maintenance and fixing - Able to recover dust and reuse as raw material - Able to treat high temperature dust gas according to the type of material 4. Application - Casting. cement. paper manufacture. furniture. wood. and feed plants - Preventive facility at rear part for smelting furnace. a reverberatory furnace. and boiler - Exhaust gas treatment facility for various combustion devices - Air pollution prevention facility for urban waste (industrial waste) incinerators - Incineration waste gas treatment containing DIOXIN |
Technology & Process |
| 489 | Dust Collecting Equipment | Dust Collecting Equipment | Shin Kwang Environmental Technology Co. | http://shinenvironemntaltechnology.kr | 1. Outline - This is a facility which collects dust with filter cloth when exhaust gas containing dust pass through the several filter cloth installed side by side. This facility collects effectively minute and high concentration dust due to dust layers. 2. Introduction 3. Character - Highly effective to collect particles and is capable of collecting various shapes of dust. - Usable for high concentration dirty air and is capable of treating various capacities. - Able to use fiber or its pretreated granular filter cloth for the highly effective collection of dust smaller than 1 mm or gas polluted substances. - Crusty caking or plugging may occur for wet substances. concentrated moisture and adsorbed substances and therefore this equipment needs a specific facility. - Dangerous fire or explosion may take place when easily oxidized dust is collected. 4. Application - Cement plants. metal process factories. food factories. chemical plants and steel factories. |
Equipment |
| 490 | Multi Cyclone | BMC-1T ~ BMC-100T | Bo-Yang Mechanical Engineering Co, LTD. | http://www.boyang.co.kr | 1. Outline As a result of studying research for a several years. Bo-Yang Mechanical Engineering Co. LTD. develops with 100% domestic technique this device for removal of large size dust such as ash from the combustion boiler at high temperature and pressure and fly-ash from the cement mills foundries. 2. Introduction 2-1. Principle - Identical cells are placed parallel above a hopper. - At the inlet of each cell are fitted with internal vanes (or guide vanes) which impart a spinning motion to the dust laden gas. - Therefore. centrifugal force drives the dust to the outside of the cell where it falls freely into the hopper. while the cleaned gas emerges from the cell via a central pipe. |
Equipment |
| 491 | Dust collector | EB-Deduster | CF Tech | http://www.cftch.co.kr | 1. Outline EB-Deduster is a dust collector that adopts the advantages of electric dust collection and bag filtering. EB-Deduster is developed to maintain the dust collection efficiency by using the advantages and to reduce the operation cost. 2. Introduction In the entrance of EB-Deduster. a corona discharging area is installed for dusts to be charged with negative charges. The charged particles are collected on the surface of filtration clothes by electrostatic attraction. The density reduction of the dust layer formed there reduces the pressure loss. Thus. the density reduction increases the dust collection efficiency of fine dusts with less than 1 mm. 3. Characteristics 1) The remnant pressure loss is reduced by 30% 2) The de-dusting interval is extended by more than twice 3) The life time of filtration cloths is extended by more than twice. 4) It is possible to save the energy consumption by about 15%. 5) The dust collection efficiency of fine dust particles is improved by about 5% 6) It is possible to maintain the total dust collection efficiency at more than 99.9% 4. Application 1) Factories to install dust collectors 2) Factories to reorganize or substitute superannuated dust collectors 3) Factories with small installation areas for dust collectors 4) Industries with dusts difficult to collect or de-dust. 5) Factories with the measures for controlling the total volume of contaminants. | Equipment |
| 492 | Dust Collector | Duk Young Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Outline It emits the air flowed in silo (hopper) and uses filter to prohibit the particulate matter going outside from moving divisions 2. Introduction 3. Characteristics - High efficiency on dust collection and consistent operation - Treat large amount of air volume by controlling the filtration speed - Sunction scattered dust and emit clean air after filtering dust with filter 4. Application - Dust |
Equipment | |
| 493 | Dust filtration and collection facility | BAG FILTER | Hytech ENG Co., Ltd | http://www.hy-tech.co.kr | 1. Outline - Exhaust gas flows into the main facility and dust is collected at filter bag. The method uses the principle in which collected dust plays the supporting role which enhances dust layer to collect dust effectively. Dust at filter bag is removed through air pursing and is collected at the bottom layer. The preventive facility is widely applied at industries where significant amount of dust is emitted. 2. Introduction 3. Characteristics - Able to collect fine dust (Scope of collection 0.1~100㎛) - Able to apply for various uses - High efficient collection (95~99%) - Excellent dust installation and removal efficiency - Long-term lasting of efficiency - Able to reuse resource by recovering raw material - Simple maintenance and fixing - Need to treat collected dust 4. Application - Iron. steel manufacture and casting industries - Metal product manufacturing industry - Machinery manufacturing industry - Car component manufacturing industry - Basic chemistry and general chemistry industries - Textile and leather industries - Food and pharmaceutical industries - Grain and feed industries - Wood processing industry - Equipment for the rear part of the incinerator - Various dust emitting industry sites |
Technology & Process |
| 494 | Electrostatic Precipitator | Electrostatic Precipitator | Halla Energy & Environment | http://www.hallasanup.com | 1. Outline Dust made in industrial fields is the representative of material that brings about air pollution. among a variety of pollutants. Halla's electrostatic precipitator has superior dust collecting efficiency. and an excellent performance against such harsh dust as high-temperature gas and corrosive gas. The precipitator is economical in maintenance as well. Halla is perfectly performing the overall business including engineering. commissioning and after service. on basis of up-to-date technologies and information with world's prominent makers of electrostatic precipitators. 2. Introduction - Three Halla ESP's installed in a co-generation power plant in Daegu. Korea (130 ton/hr X 2) - Halla ESP with gas conditioning tower behind a glass melting furnace in Kunsan. Korea (500 ton/day) - Halla ESP behind Halla downstream evaporative cooler for a rotary kiln in a cement plant in Okke. Korea (5.500 ton/day) - Halla ESP behind a clinker cooler in a cement plant in Danyang. Korea (4.000 ton/day) 3. Characteristics - Easy to maintain. - Low in operating cost. - Fewer trouble and semi-permanent because it is a mechanical rapping type. - The specially designed dust collecting plate has a high performance dust collection efficiency. high strength. and a longer duration. - Has an excellent discharge capability with the RS electrode of reinforcement pipe. excellent in mechanical strength. and resistant against thermal deformation. 4. Application - Power plant - Industrial boilers. urban & industrial waste incineration plant - Cement plant (kiln Mill. Dryer. Clinker Cooler. etc) - Iron & steel making plants (smelting furnace. electrical arc furnace) - Glass melting furnace - Coal drying and pulverization plant - Nonferrous metal. pulp & paper mill. chemical industries. | Instrument & Chemicals |
| 495 | Dust removing and cooling apparatus for reducing the harmful gases | Dust removing and cooling apparatus for reducing the harmful gases | Seowon TMS Co., Ltd. | http://www.sowontms.co.kr | 1. Outline - The principle is to absorb dust at the front of chimney or SCR and the post of dust collection. - The gas and water pass through the fair and unfair current of four stages and finally it crashed at the right angle with the disturbing plate by 60m/sec. The minute bubble particle produced by this crash collects the water-soluble materials in the dust and harmful gases. - It can save the installation and operation cost compared to the conventional facility and it is needed to give positive consideration to adapt this facility for the global environmental restriction. 2. Introduction 3. Characteristics - No emission of white lead - The efficiency of dust collection more than 99.00% (actually more than 99.5%) - Removal of soluble salt more than 99.5% such as HCl. HF. NH3. NCH. CS2. H2S. SiF4 and SiH6 - Cheap initial installation cost - Small size compared to the conventional facility - Cheap maintenance cost (half of the conventional cost) - Support of the installation cost by the government due to the NET certification - Removal of other soluble odors 4. Application - Incinerating furnace - Al incinerating furnace - Pickling process - Semi-conductor process - Process by RDF fuel - HCl. H2SO4 producing process - Fertilizer manufacturing process - Water soluble gas removing facility such as dust. HF. HCl. HCN. SiF4 and SiF6 |
Equipment |
| 496 | Dust Sensor | Dust Sensor | NIDS | http://www.nids.co.kr:8080/smain.html | Product Description This application note of NIDS dust sensor “SM-PV-00A” is a document consist from explanation how to use. cautions when using it. characteristics data. etc. for customer`s reference when applying this device. When designing the device. please refer to this document and also evaluate it under actual usage conditions. Product Feature ◊ Compact & thin package (W59x H45x D20 mm) ◊ With application of PWM (Pulse Width Measurement). the device can detect even single housedust. ◊ Cigarette smoke (Small particle:P1) and House dust (Large particle:P2) can be distinguished. Product Specification / Models ◊ House dust ◊ Cigarette smoke Application ◊ Air purifier (cleaner) ◊ Air conditioner | Equipment |
| 497 | Dust treatment | Dust treatment | CK WORLD Co..Ltd | www.ckinjector.co.kr | <!--StartFragment--><DIV class=0 style=-ms-text-autospace:; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 굴림; font-size: 11pt; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: Arial; mso-font-kerning: 1.0pt;>Bag filters are being elongated (normally 6 to 10m) for reduction in construction costs and efficient land utilization. CK World has developed CK Injector. a new-concept blow tube for bag filters. and attained patents in Korea. China and Japan. The client list to their new creation includes POSCO. Hyundai Steel. OCI. </span><span lang=EN-US style=letter-spacing: 0pt; font-family: 굴림; font-size: 11pt; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: Arial;>Dongsuh Food. CJ and Cargill. To enter the Japanese market. performance inspection report must be submitted with business proposal or delivery of finished product. but it has been difficult to do so. since there was no adequate test equipment to accommodate their requirements. With support from Industrialization Support Project for Small to Medium Environmental Enterprises sponsored by Korea Environmental Industry & Technology Institute. CK World was able to build this tower. which will be open to the industry for product inspection and performance testing and utilized as apparatus for certification in collaboration with national testing authorities.</span></DIV> | Equipment |
| 498 | DUSTKING | DUSTKING | Dustking Co., Ltd. | http://www.dustking.com | 1. Outline - High-efficient dust collector (Dust collectable from 0.2um). 2. Introduction 3. Character - Down Flow System - Filters are installed horizontally. rather than vertically. - Dusts fall into the Dust Box naturally without flowing in whirls or rescattering. - The product does not suffer from lowered collecting efficiency or filter’s life-shortening. caused by dusts which fail to fall into Hopper because of updraft. and infiltrate into the filter. - Because it is not required to enlarge the volume of the dust collector to reduce inner ascending speed. the dust collector can operate fully functional with the minimum space to install in. 4. Application - High-efficient dust collector. |
Equipment |
| 499 | DUSTKING | HANSUNG DUSTKING Co., Ltd | http://www.dustking.com | 1. Outline • High efficiency dust collector - Lengthens the life cycle by horizontal installation instead of vertical installation. - Has high efficiency with its small installation area. 2. Introduction 14Biz-145.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-145.JPG'>3. Characteristic • Down flow system • Lengthens the life cycle by horizontal installation instead of vertical installation and has high efficiency with its small installation area • DUSTKING is a system that collects freely falling dust through the airflow and is piled into a dust box without a vortex and rescattering in the dust collector. • Dust that does not fall into the hopper because of the updraft does not penetrate the filter. thus preventing the shortening of the filter’s life cycle of filter. The dust collecting efficiency may drop because the differential pressure increase does not occur. A large amount of dust can be collected by the system’s small installation area because the capacity of the dust collector is not necessarily enlarged to reduce the climbing rate in the dust collector. • No rotary valve is required. 4. Application • Dust-collecting facilities |
Equipment | |
| 500 | DW series metering(dosing) pump | DW series metering(dosing) pump | Dong-il M.T Co.,Ltd. | dongilmt.com | <DIV><br>This product is steady seller like books. Since launching the product in 1993. there has been no revision of product design. The reason is it doesn’t need to. It is wonderful product design so that there are no defect and malfunction at all. If operator maintain well. it should works above 10 years.<br> The motor is 3 phase. 220/380v. The type is diaphragm metering pump. According to fluid type. material of head can be changed such as PVC. SUS304. 316. TEFLON. PVDF. The range of capacity is from 50cc/min to 35000cc/min. but attach the head one more in parallel. capacity might be double.</DIV><DIV><br><B>Features</B></DIV><DIV><B></B><br>1) Steady seller. it has been sell above 40.000 since launching the product.<br>2) Reliable. Accuracy. Wonderful design. Depends on operation circumstances. it works more than 10 years.<br>3) It is possible to attach pump head in parallel. so that the capacity is double. It can be overcome the limit maximum capacity.<br>4) It is possible to adjust capacity automatically by attaching SERVO UNIT which gets information from PH meter.<br><B>Spac</B><br>1) Discharge capacity : 50cc/min ~ 50L/min(in case of duplex head)<br>2) Material : PVC.SUS304.SUS316.TEFLON.PVDF<br>3) Motor : 3 phase. 60Hz.220/380v.IP44(standard)<br>440V.50Hz. anti-explosion. waterproof motor in special order<br>4) 30% ~ 100 % adjust flow capacity<br>5) viscosity : below 1000cp<br>6) operation temperature: PVC(0~50). SUS(0~80)<br>7) connecting type: flange(standard). hose(optional)<br></DIV> | Equipment |
| 501 | DynaBAF System | DynaBAF System | ATE Co., Ltd. | http://www.atecorp.co.kr/ | 1. Outline - This DynaBAF System refers to a technology that composes layers of filter paper with granulated materials which make it easier for microscopic organisms with porous to be attached and grow and forms a bio film in which lots of microscopic organisms inhabit and makes sewage penetrate into the layers of the bio film. The DynaBAF System is able to remove pollutants in an efficient way by combining physical filtration and biological treatment. 2. Introduction 3. Characteristics - Up-flow bio film filtration system - Filtration technology using a new type of filter media - Easy to remove organic matters and T-N and T-P - Easy to expand and retrofit existing facilities - Filtration system that is easily applicable to various capacities 4. Application - Sedimentation equipment |
Technology & Process |
| 502 | DynaENR System | DynaENR System | ATE Co. Ltd. | http://www.atecorp.co.kr/ | 1. Outline - This DynaENR System is an up-flow filtration advanced wastewater treatment apparatus that can remove organic matters. suspended solids and nutritive salts (N.P)that are contained in effluents in rivers. lakes and sewage treatment plant in a single chamber at a time. 2. Introduction 3. Characteristics - Secure high quality water - Reduce and minimize operating cost as well as maintenance and administrative expenses - Introduce automatic back wash process by differential pressure - Introduce patented Ecowash : Reduce a backwash flow by about 3% - Reduce the amount of chemicals to be used - Improve energy efficiency - Applicable to removing various pollutants - Easy to operate through automation 4. Application - Reuse of treated water - Facilities to treat industrial water - Removal of total phosphorus (T-P) - Removal of total nitrogen (T-N) - Removal of chromaticity - Removal of BOD. COD and SS |
Technology & Process |
| 503 | DynaENR System | DynaENR System | ATE Co., Ltd. | http://www.atecorp.co.kr/ | 1. Outline • This is a high-profile sewage treatment system that applies upflow filtering methods. which enable the removal of organic matters. suspended solids. and nutrient salts (N. P) contained in river water. lake water. and effluence from sewage disposal plants in a single reaction tank. 2. Introduction 14Biz-67.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-67.JPG'>3. Character • Secures high-quality water (observation of water resources recycling) • Reduces operation and maintenance costs • Backwashing process through a change in pressure • Introduces the patented Eco-Wash technology: reduces water used for backwashing by approximately 3% • Reduces the quantity of chemicals required for treatment • Enhances energy efficiency • Removes different types of pollutants • Easy operation of the automatic process 4. Application • Reuse of treated water • Treatment facilities for industrial water • Total P removal • Total N removal • Color removal • BOD. COD. and SS removal |
Equipment |
| 504 | Dynafilter / Dynasand EcoWash System | Dynafilter / Dynasand EcoWash System | ATE Co., Ltd. | 82-2-855-4070 | 1. Outline - This Dynafilter / Dynasand removes suspended solids and pollutants through physical filtration by forming the up-flow that penetrates into a filled media layer after making water flow in the lower side of a filter and eliminates those solids and pollutants through a back-wash process that gets rid of SSs and T-P separated gradually by moving them at the same time with filtration. 2. Introduction 3. Characteristics - Reduce and minimize operating cost as well as maintenance and administrative expenses. - Secure high quality water - Reduce discharge and backwash flow by 1-3% - Reduce the amount of chemicals to be used - Improve energy efficiency - Develop a technology aiming for green growth - Applicable to removing various pollutants - Easy to operate through automation 4. Application - Filtration process - Back wash process |
Technology & Process |
| 505 | Eco Aladdin | Eco Aladdin | AIRTEC CO., LTD | www.airtecair.co.kr | <DIV>Eco Aladdin : Applied area (10㎡) and/or car. small desk. baby bed<br> E-nano film filter can be washable and reusable with<br> certain period(Recommended period : Ave. 1 year)</DIV><DIV> LED fan operating with switching onin and transferred to the pure water reservoir. </DIV><DIV>Backwashing with air and water are implemented in each sector separated by the inner partition.</DIV> | Air Treatment |
| 506 | Eco Bio filter | Eco Bio filter | SHINGANG HI-TECH CO., LTD | http://www.sgenv.kr/ | 1. Outline EBF (Eco Bio Filter) is an eco-friendly type technology to reduce nonpoint pollution sources combining infiltration and filtration functions. Applying optimal filtration linear velocity. the technology can be used as a filter-type when infiltration is not available due to geological features. 2. Introduction 3. Characteristics - Natural-type technology using treatment of pollution sources by filter media (sorption. adsorption. penetration. filtration. etc.) and underground infiltration - Woodchips and sand which are effective in particle collection of heavy metals or fine soil are used as filter media - High treatment efficiency with 3-step filtration process using woodchips. pebbles. and sand - Woodchips are used for a natural-type nonpoint pollution source reduction facility. which improves the efficiency in absorbing and filtering fine soil or heavy metals and removing dissolved pollution sources as their specific surface area is highly porous. but the technology can be used as a filter-type when infiltration is not available due to geological features 4. Application - Nonpoint pollution source reduction facility |
Technology & Process |
| 507 | RPP (Recyclable Plastic Panel) | R.P.P | EcoiNC Co, Ltd | http://www.ecoinc.co.kr/ | It is the first PVC fence that made construction sites and their surroundings environmentally friendly improved. and that improved construction method. soundproof effects. environment around sites. the reduction of construction cost compared to those in the existing products. 1. It provides a perfect flat surface being beautiful on its own and makes it possible to express a corporate image or various graphics freely by using wrapping sheets on it's surface. (Sharp reduction of advertising expenses) 2. Lighter weight enables it to be easily taken in. out and installed. being very effective in reducing construction period. 3. It's tensile strength and bending strength are superior to those of the existing product. and it is a fire-retardant(self-extinguishing) product that is safe from fire 4. The color of fence is expressed freely during production. and it is not discolored for a certain period of time despite high level of cleansing. 5. It remedied the shortcomings of the existing product such as outward deformation and rust occurence. etc caused by exposure to external pressure. salt. mositure of the existing product. and is a product that can be recycled when broken. and that acquired GR certification from the Korean Agency for Technology and Standards of the Ministry of Commerce. Industry and Energy 6. It is a fence designed to reduce noises from equipment in sites using sheet structure designed independently. 7. It is a recyclable produt. which can highlight environmentally friendly corporate image. and be recognized as performance used of recyling construction materials in the future.(Reinforced regulations for environment)  http://img.konetic.or.kr/apec-vc/xml/img/market_place/rpp2.JPG' > |
Eco-Friendly Products |
| 508 | ECO Plastic Fence For Building Site | ECO Plastic Fence For Building Site | ECO INC CO., LTD. | Product Description Our PVC panel is a new concept of construction site fence which is made by recyclable reinforced PVC. It is also used for basement wall panel (finishing material). The key application of our fence is for construction site. highway. Ski resort fence. interior hoarding & etc. Product Feature - Perfect rust resistance - Easy installation / application - Beautiful flat appearance - Powerful advertisement effect - Diverse color representation Product Specification / Models 34mmT x 500mmW x Length as per requested (Max 12.000mm) Application Temporary fence for building site Other Information | Eco-Friendly Products | |
| 509 | Eco-friendly light-weight ceiling board/ C0101 series | Eco-friendly light-weight ceiling board/ C0101 series | Nature Co., Ltd. | <div class=1 style=text-align: justify; line-height: 130%; text-indent: -18pt; margin-left: 41pt; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l4 level1 lfo5;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: Times New Roman;><b><font face=굴림></font></b></span>1. Spec.</div><div class=1 style=text-align: justify; line-height: 130%; text-indent: -18pt; margin-left: 41pt; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l4 level1 lfo5;>- Size: 300*600*7 (mm). 300*600*9.5 (mm) </div><div class=1 style=text-align: justify; line-height: 130%; text-indent: -18pt; margin-left: 41pt; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l4 level1 lfo5;>- Shape: Flat board type</div><div class=1 style=text-align: justify; line-height: 130%; text-indent: -18pt; margin-left: 41pt; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l4 level1 lfo5;>2. Strength of the Item </div><div class=1 style=text-align: justify; line-height: 130%; text-indent: -18pt; margin-left: 41pt; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l4 level1 lfo5;>Our product is environmentally friendly because recycling industry materials such as blast furnace slag or fly ash are used as main raw materials.</div><div class=1 style=text-align: justify; line-height: 130%; text-indent: -18pt; margin-left: 41pt; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l4 level1 lfo5;>Our product does not create carbon dioxide during manufacturing because of the application of no firing process. which enables to maintain used mineral material property even after manufacturing.</div><div class=1 style=text-align: justify; line-height: 130%; text-indent: -18pt; margin-left: 41pt; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l4 level1 lfo5;>Our products are eco-friendly light-weight boards manufactured with the combination of light weight raw materials.</div><div class=1 style=text-align: justify; line-height: 130%; text-indent: -18pt; margin-left: 41pt; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l4 level1 lfo5;>Our product does not create toxic gases because burning does not occur during a fire due to the use of natural inorganic materials.</div><div class=1 style=text-align: justify; line-height: 130%; text-indent: -18pt; margin-left: 41pt; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l4 level1 lfo5;>Our products are able to be used even in high humidity places because they have functions of hygroscopicity. antibacterial property and deodorization.</div><div class=1 style=text-align: justify; line-height: 130%; text-indent: -18pt; margin-left: 41pt; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l4 level1 lfo5;>Our products suppress the generation of active oxygen and emit the infrared ray and anion promoting the metabolism. </div> | Eco-Friendly Products | |
| 510 | Eco-Friendly Organic Agricultural Materials | Chumdan Environment, Co., Ltd | http://www.cdan.co.kr | 1. Outline  eco- bv • Product which sufficiently filtered and aged materials extracted by burning bamboo below 400 ℃; Use bamboo vinegar as a main material with high degree of maturity. acidity. specific gravity and purity  eco-green • Since the functional bamboo vinegar contains high levels of polypehnol and organic acid. it is excellent in suppressing and evading disease and insect pest. accelerating mineral absorption. and improving immunity against various pathogenic fungi 3. Character  eco- bv • Very effective in relieving continuous cropping hazard. leaf injury. and soil toxin as well as promoting rooting and growth and controlling mite • Perfect active nutritional supplements of chelate type: Stimulation of cell growth. rooting. flowering. germination and preservation of fruit’s freshness with various plant hormones in bamboo vinegar • Effective in purifying the air and removing residual pesticide and its odor by generating negative ion  eco-green • To help retain moisture and incorporate soil around roots of plant • Osmophilic to drought and cold-resistance with fructan which is a main material • Very effective in improving tolerance to drought and cold weather as well as improving soil and stimulating growth 4. Application • Organic agricultural technique • Eco-friendly agricultural technique | Eco-Friendly Products | |
| 511 | Eco-friendly usedparts, Iron scrap | Eco-friendly usedparts, Iron scrap | Insun Motors Co,.Ltd. | www.insunmotors.co.kr | <div class=0 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0.1pt; font-family: 맑은 고딕; font-size: 9pt; mso-fareast-font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕>· Before product vehicle. Laid the foundation of collect data. high valuable production</span></div> <div class=0 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0.1pt; font-family: 맑은 고딕; font-size: 9pt; mso-fareast-font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕>· Quick and accurate dismantle of ELV through One-stop indoor system</span></div> <div class=0 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0.1pt; font-family: 맑은 고딕; font-size: 9pt; mso-fareast-font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕>· New value creation by eco-friendly recycling system and 95% recycleing rate</span></div> | Eco-Friendly Products |
| 512 | Eco-friendly Water-based Machinery Parts Cleaner (Compact CP) | Eco-friendly Water-based Machinery Parts Cleaner (Compact CP) | Jason Ltd. | http://blog.daum.net/jasonltd | 1. Outline This Eco-friendly Water-based Machinery Parts Cleaner (Compact CP) is an environment friendly system which washes out oil and impurities on the machinery and their parts using a water-based cleanser containing oil-eating microorganisms. instead of toxic solvent. Excellent cleaning performance 2. Feature - Economical system with a semi-permanent lifespan. - No need of waste oil disposal. - Eco-friendly cleanser harmless to the human body. - Low fire risk. - Pleasant cleaning works with a warmed cleanser. - Anti-rust additive contained. 3. Introduction 4. Application Machinery Parts Cleaning |
Equipment |
| 513 | Ecological Paving Filter (EPF) | Ecological Paving Filter (EPF) | SHINGANG HI-TECH CO., LTD | http://www.sgenv.kr/ | 1. Outline Ecological Paving Filter (EPF) has been developed as part of the aquatic ecosystem restoration project (Eco-Star Project) by the Ministry of Environment. The paving structure of the EPF is comprised of waterproofing sheet (geo membrane). drainage layer. first filtration layer (geo net). second filtration layer. vegetation soil from the bottom. And the vegetation soil is paved on the top of the filtration layer for plants to grow. In the filtration layer. perforated pipes are installed on the drainage layer in order to drain treated water filtered in the filtration layer. 2. Introduction 3. Characteristics - Remove nonpoint pollution sources at the bottom of the paved surface - Remove nonpoint pollution sources using landscaped areas between parking lots - Eco-friendly technology improving existing parking lots - Highly efficient in treating dissolved organic matters (BOD. TN. TP) - Require no separate non-point pollution source reduction facilities - Economical as it uses the existing site 4. Application - Nonpoint pollution source reduction facility |
Technology & Process |
| 514 | Ecological Toxicity Measurement Equipment for Labs | MicroTox?500 | DONGMOON ENT CO., Ltd | http://www.dongmoonent.co.kr | 1. Outline MicroTox?500 is designed to measure the toxicity of water and soil by using luminous bacteria. The device is currently used to measure ecological toxicity in waste treatment facilities and industrial water treatment system. In addition. the product is used by more than 70 percent of large-sized water facilities in the U.S. On top of this. the equipment is widely applied in various fields in much of the world with the use of a certified testing method. 2. Introduction 3. Characteristics - Obviate the need for a cultivation technology (use of refrigerated bacteria) - Obviate the need for sample pre-treatment - Achieve prompt analysis in five to 30 minutes - Keep the temperature automatically constant (In case of bacteria and samples. the temperature reaches 5 ℃ and 15 ℃. respectively) - Enable analysis of solid samples (soil) - Show response to more than 2700 types of chemicals - Show high correlation with other species (except for fishery) - Show high representation (less than 15 percent of variation coefficient. EPA certification) - Recognized as standardized equipment for toxicity assessment (ISO. ASTM) 4. Application - Toxicity evaluation of water supply facilities - Pre-warning system - TRE for sewage and waste water treatment facilities - Environmental monitoring (Conducting toxicity evaluation for rainy water. water pollution. ground water. soil and sediments) - Toxicity evaluation for domestic products. tools and medicines |
Equipment |
| 515 | ECOLYZER | Ecotech Engineering Inc. | http://www.ecotecheng.com | 1. Outline • ECOLYZER is a highly concentrated wastewater treatment system that treats non-degradable and high-toxic waste water effectively. • It is appropriate for sea water or wastewater with high salinity. 2. Introduction 14Biz-428_Ecolyzer-ed.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-428_Ecolyzer-ed.jpg'>3. Characteristics • Its efficiency does not decrease at high temperature of 40° or over or low temperature of 15° or below. • Easy operation due to its simple facility. easy maintenance. and unmanned automatic function • Few additional facilities and short installation period due to its compact size and can be produced as a mobile type. • Saves energy by using selective electrodes by treatment target substance • Uses electrodes with excellent durability. which can be used for over two years 4. Applications • Iron manufacture (BFG/LDG/COG) wastewater • Leachate • Dyeing wastewater • Livestock manure wastewater • Animal waste leachate • Highly concentrated nitrogen wastewater • Wastewater containing other toxic substances |
Instrument & Chemicals | |
| 516 | Eco-Shower Kitchen | Eco-Shower Kitchen | Ecozone Inc. | www.ecoz.co.kr | <!--StartFragment--><div class=0 style=text-align: left; letter-spacing: 0pt; vertical-align: bottom; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕;></span> </div><div class=0 style=text-align: left; letter-spacing: 0pt; vertical-align: bottom; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕;>- Eco-friendly Kitchen Showerhead to reduce the use of detergents</span></div><div class=0 style=text-align: left; letter-spacing: 0pt; vertical-align: bottom; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt; mso-list: l0 level1 lfo1;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕;>- </span>Color: silver</span></div><div class=0 style=text-align: left; letter-spacing: 0pt; vertical-align: bottom; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt; mso-list: l2 level1 lfo3;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕;>- </span>Size: 19cm×9cm×7cm</span></div><div class=0 style=text-align: left; letter-spacing: 0pt; vertical-align: bottom; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-font-width: 100%; mso-text-raise: 0pt; mso-list: l2 level1 lfo3;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕;>- </span>Weight: 245g</span></div><div class=0 style=text-align: left; vertical-align: bottom; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l3 level1 lfo4;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕;>- </span>HS code: 3922 90 9000</span></div><div class=0 style=text-align: left; vertical-align: bottom; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l3 level1 lfo4;><span lang=EN-US style=letter-spacing: 0pt; font-family: 맑은 고딕; mso-font-width: 100%; mso-text-raise: 0pt; mso-ascii-font-family: 맑은 고딕;></span> </div> | Eco-Friendly Products |
| 517 | Eco-station | Eco-station | Hanlim Ecotech Co., Ltd. | http://www.ecotech.co.kr | 1. Outline • This is a construction method for riverbank vegetation using PLA multinets(MultiNets). calcium ion. fertilizer string nets. and seed sheets. 2. Introduction 14Biz-92.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-92.JPG'>3. Character • This method utilizes slow-releasing fertilizers that are coated with high-molecule materials that allow the nutrients to flow out slowly over 3–4 years. • Because it utilizes calcium-treated jute nets. which can neutralize high acidity caused by acid rain. and has great air-permeability. absorptiveness. corrosiveness. and thermo-keeping ability. it can successfully create an environment highly conducive for vegetation growth in the construction sites. • As it uses seed sheets. additional work for seeding is not necessary and the construction process is fast. • Because problems related to the leakage of the slow-releasing fertilizers are nonexistent and the vegetation easily absorbs the nutrients. soil and water pollution is greatly minimized. 4. Application • Revetment revegetation • Revetment protection • Retaining wall and slope revegetation • Eco-river restoration technology • River ecosystem restoration |
Equipment |
| 518 | Eco-Tank | Eco-Tank | DRB Dongil Co., Ltd. | http://www.drbworld.com | 1. Outline - Eco-Tank(initial rainwater treatment equipment for the surface of the road). - This is the equipment which uses non-power Handling Hydrophobicity Redundant Member that selectively handles only initial rainwater to handle NPS and remove endocrine disruptors by absorption. 2. Introduction 3. Characteristics - The equipment which uses non-power Handling Hydrophobicity Redundant Member that selectively handles only initial rainwater to handle NPS and remove endocrine disruptors by absorption. -The equipment which can selectively handle only primary rainwater. -A rainwater receiver substitution of the existing sewers. –The combination of the role of Rainwater Receiver and Rainwater Handling Function. -Able to remove the endocrine disruptors. -The convenience of construction and management of the well-manufactured equipment. -The bypass function at High Flows. 4. Application. - Non-point pollutant source decontamination. sewage disposal and storm sewers. |
Equipment |
| 519 | Eco-top Water-permeable Block | Eco-top Water-permeable Block | Eco-top Inc. | http://www.eco-top.co.kr | 1. Outline - Quite often. reconstruction or replacement of pavement is required due to floods caused by soil and dust clogging the pores of the pavement surface. Such budget waste can be prevented by our water-permeable block. 2. Introduction 3. Character 4. Application - Road. Pavement. |
Eco-Friendly Products |
| 520 | Ecotreat | Ecotreat | Ecostar Co., Ltd. | http://www.ecostar.co.kr | 1. Outline • A device used to treat combined sewer overflows. • When the proposed hourly maximum sewage flow during rainfall is Q. up to 3Q can be collected in the Storm Overflow Diverging Tank. The 2Q is bypassed as the CSOs and 1Q are transported to and treated in sewage treatment facilities. 2. Introduction 14Biz-99.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-99.JPG'>3. Character • It is a fast filtration treatment system for combined sewer overflows. • It has an automatic operation system. • Its backwash process uses the treated water. • It uses an upward flow filtration method. • It is used for the floating particulate fabric media. • It uses domestic technology (Korea Institute of Construction Technology). • It can quickly filtrate (filtration rate 800–1000 m/day). • It has more than 80% of porosity (up to 92%). • It has more than 80% TSS treatment efficiency. • Its media is highly durable. • It can be efficiently used for more than three years. 4. Application • Drainage districts • Pumping stations • Water discharge areas • Sewage treatment facilities |
Equipment |
| 521 | Effective Volume Diagnosis Technology For Aerobic Digestion Tanks Of Sewage Disposal Plants | Effective Volume Diagnosis Technology For Aerobic Digestion Tanks Of Sewage Disposal Plants | Korea Atomic Energy Institute | https://www.kaeri.re.kr/english/ | □ Technology Introduction This technology utilizes radioactive tracers on digestion tanks of sewage disposal plants to diagnose the fixed quantity of the effective volume and immobile layer of the process. Here. the radioactive tracers’ movement is chemicophysically identical to that of sludge flow. but is also distinctively measurable with radiation. making it possible to measure the flow patterns and compound properties of sludge flowing into digestion tanks. as well as the residence time distribution of the sludge within the digestion tank. □ Technology Principle The technology obtains information on internal flow properties by inputting radiation tracers into the interior of the operating process. measuring gamma rays emitted from the tracers using external high-sensitive detectors. and calculating the residence time distribution. □ Technology Features - Capable of measuring from outside the facility during operation without hindering the process - Is not influenced from inflowing water quality. process operating method and climate changes - A new technology without alternative technologies in obtaining the identical results □ Treatment Process ▶Phase I – Radioactive tracer production and experimental equipment installation Select the radioactive tracer suitable for the object’s digestion tank. and use the research atomic reactor in the Korea Atomic Energy Research Institute to produce the tracers. Next. install the radiation detector on the outer wall of the digestion tank and pre-determined location. ▶Phase II – Radioactive tracer input and data collection Use a specially manufactured radioactive tracer injection device to remotely inject tracers within the piping. and use the data collection device (KTG-DL1. Korea Atomic Energy Research) to measure the changes in tracer concentration and residence time distribution on a real-time basis. ▶Phase III – Model application of measuring data and fluid movement analysis Use the data correction and analysis software to calculate the average residence time distribution of the sludge. Comparatively analyze the value to calculate the effective volume per each location and deduce the production form of the immobile layer. □ Features - Capable of on-line confirmation on experiment data collection and detection results on-site - Measures the fixed quantity of the internal immobile layer’s quantity and location without stopping the process - Uses high-penetration gamma rays to maximize capacity of applicable equipment □ Economical Efficiency - Measures the operating efficiency of the digestion tank and the production quantity of the immobile layer to evaluate the necessity for dredging work. and predicts future operating longevity. This allows the operator to plan for improvements in efficient operations. and has the economical effect of optimizing the facility’s dredging cycle. □ Prospects - Acquires the radiation tracer technology necessary for environmental process analysis. and is thus a substantial improvement to the designing. construction. and operating technology of wastewater disposal plants. - Contributes to improvement of reliability and advancement of environmental management technology with verification on the environmental process value model using radiation tracer technology. | Equipment |
| 522 | Chamber Filter Press | Chamber Filter Press | Mirae machine Co. | http://www.mrfp.co.kr | 1. Outline - Background 1) The previous sludge dewatering system dehydrates the sludge only by the mechanical pressure so the particles of sludge move with the filtrate and clog the filter cloth. 2) When the system applies high pressure mechanically to prevent the clog of filter cloth. it will damage the filter cloth. consume a lot of energy. and require frequent checkups for the dewatering equipment. 3) More than 75% of the sludge disposal depends on the landfill so it is necessary to build new landfill sites and incinerators for the final treatment of the sludge. 4) There should be promotional programs for recycling in order to reduce the sludge. 2. Introduction To compare with the previous dehydration method which should input the filtrate so far. this machine makes to be able to dehydrate the sludge by setting up the maximum and minimum pressure. - Operation principle for the filter press. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=216-2.jpg></center> 3. Characteristics 1) Enable to choose for automatic or semi-automatic system at how to operate. 2) Semi-permanent at resistant against an acid and alkali because the material of the filter tube makes by a special PP plate 3) High degree of efficiency at dehydration and decrease the amount of chemicals used. 4) Easy to maintain after use. less vibration and noisy when operating 5) Less the maintenance cost 6) Easy to separate a cake and a filter net 7) Good the cleanness of filtrate and high at recovery rate of solidity 8) Possible to remove the filter plate by one touch 9) Low price 4. Application - Activated sludge. sludge for oil refining. wastewater sludge for metal processing. drying wastewater sludge. waste pigments sludge. powdered active carbon. plating wastewater sludge | Equipment |
| 523 | Electric conductivity meter | CX-90i | KINE INDUSTRY | http://www.e-kine.com | 1. Outline - This electric conductivity meter can be used to measure water quality in water for agricultural use and automatic environment and manage drain for plants. The meter is easy to carry and use. The meter is a high performance electric one equipped with a carbon pole that can measure up to 100℃ of solution temperature. 2. Introduction 3. Characteristics - TCX-90i. an electric conductivity meter is easy to handle. TCX-90i is a high performance electric conductivity meter equipped with a carbon pole that can measure up to 100℃ of solution temperature. - TCX-90i has an optimum performance through an automatic transferring function of measuring range. TCX-90i has a function that can set up reference temperature for reduction and temperature calculation of automatic temperature compensation at random. TCX-90i can be widely used including drain management for large plants. measurement of water quality in water for agricultural use and automatic environment. - Automatic temperature compensation: reference temperature for reduction and temperature coefficient of automatic temperature compensation can be set up at random. - Automatic decision: decide a stable state of indication automatically and indicate stable values with temperature. - Data Watch: measure and memorize samples at the random intervals of 1 ∼ 99 minutes which can be used for unmanned monitoring of data. - Data preservation: up to 15 measured values with temperature data can be preserved. - Data output: preserved measured values can be printed out at all times. - Weatherproof structure having a strong resistance to water: structure having a strong resistance to water drop and corrosive gas. 4. Application - Measurement of electric conductivity |
Equipment |
| 524 | Electric Dehydrator | ELO-S | Korea Water Technology CO., Ltd. | http://www.koreawt.com | 1. Outline - Electric dehydrator. one of ELO-S series. is an integral core element to be integrated into each of our products and systems - ELO-S series are a secondary dehydrator designed for dehydrating the sludge cake mechanically dehydrated up to the water content level of about 80%. to the water content level of about 60%. 2. Introduction 3. Characteristics Electric Dehydrator of Continuous Operation: Dehydrated within 2 minutes - Relatively less sensitive to the type of sludge - Easy to install and operate - Remote controlling and monitoring (unmanned operation is available) - Any offensive odor can be completely shut off during operation 4. Application - Waste water treatment facilities |
Equipment |
| 525 | Electric Dehydrator | Electric Dehydrator | RIGENKOREA.CO.LTD | • Electric dehydrator is a dehydrator reducing the water content ratio by 65 – 60 by using electric penetration method from sewage sludge of water content ratio by 98 – 80. * Introduction of dehydrating technology (1) Reducing the water content ratio below 85 with the first dehydration through the first pre-treatment process (pressured compression) from the sludge by 98 – 97 water content ratio. (2) Giving the positive electricity to the drum of dehydrator by converting the triple alternating current (R.S.T) •Giving the negative electricity to the caterpillar and inputting the sludge to be dehydrated (3) Usually. sludge particle (solids) of negative electricity is moved to the drum of dehydrator by the electric between the drum and caterpillar. (4) On the other hand. the moisture of sludge particle is dehydrated by moving to the caterpillar part. It is called ‘electric penetration dehydration’. (5) Major electric mechanisms of these process ▶ Electric dehydration by electro-phoresis ▶ Capillary dehydration by electroosmosis ▶ Dehydration by coulombic heating (6) By these principles. the sludge dehydrated by electric penetration is controlled easily and simply. It is easy to control the sludge after dehydrating because the feature of macromolecule flocculant is broken during the dehydrating process. Also. it is available to reduce the drying cost. | Equipment | |
| 526 | Electric Dialysis Membrane ED | Electric Dialysis Membrane ED | MEMB FLOW Co., Ltd. | http://www.membflow.com/ | 1. Outline - This ED(Electro Dialysis) employs an ion exchange membrane and direct current to separate persistent ions and is used to remove or separate salt. The system is characterized by low energy consumption and efficiency in separating salts. 2. Introduction 3. Characteristics - Able to selectively and swiftly remove. condense. refine and recover ion substances. - Showing little change in components due to a separation method hardly involving heating and applying pressure. - Able to separate non-ion substances from ion substances. - Easy to treat due to low operation pressure. 4. Application - Acid recovery - Organic synthesis. oxidation and reduction response - Manufacturing eating salt. desalinating salt. Acid recovery and substitution reaction |
Equipment |
| 527 | Electric dust collector | EP | Coreco Co.,Ltd. | http://www.coreco.co.kr | 1. Outline - It is appliance to protect human body and environment from air pollution made by infinite exhaust of dust fume. smoke and harmful gas generated in working place - It is collected dust and separated by static electricity in dust collecting pole after that dust collecting particle in gas is charges with electricity through CORONA discharge with high voltage and low current and dust particle collected in dust collecting plate is eliminated by hitting equipment and it shows high effect in case of super corpuscle under 0.1μm 2. Introduction 3. Characteristics - High efficiency of collecting dust - Easy to check and repair - Low in price of operating (Small damage of pressure and small required power) - Safety with safety device established - Applicable to all parts of industry - Applicable from minimum 30.000m³/hr too maximum 1.000.000 m³/hr 4. Application - Boiler for industry and development. incineration road. cement plant. steel and chemical plant. nonferrous metals plant. glass melting road Plant |
Equipment |
| 528 | Electric Heating Vaporizer | Series 71V3000 | KC Samyang Water Systems Co., Ltd | http://www.syws.com | 1. Outline - The electric heating vaporizer vaporizes and heats liquid chlorine. sulfur dioxide or ammonia according to the rate controlled by gas feed system. 2. Introduction 3. Characteristics - High density structure: 1/2 inch wall thickness of vaporizer exceeds the ASME ode by more than 50% - Efficiency: Do not need other circulation as it is designed to circulate water using natural convection - Automation: When heated. temperature inside the vaporizer is automatically controlled by a digital electronic temperature controller - Convenience: Need basic caution during operation 4. Application - Vaporization of chlorine. sulfur dioxide or ammonia |
Equipment |
| 529 | Electric Humidifier | KI-ED-series | KUMHO INDUSTRY CO., LTD. | http://www.waterpower.co.kr/ | Product Function: Industrial dehumidifier. with humidity control device. prevents malfunctions caused by heating or corrosion in each control panel and inner part of automation machine. Recently. the importance of industrial dehumidifier is increasing. as precision and miniaturization of all types of machine are rapidly being developed according to development of information communication technologies. Main Characteristics of Kumo KI-ED-Series: KED Electric Dehumidifier provides environmental-friendly environment control solution in electronic control method that uses semiconductor thermal element. instead of compression type that uses existing refrigerant. Through application of high-precision semiconductor element. there is low noise and can apply small-sized and light-weighted. Features: - ehumidification capability: 20cc~100cc/h(30℃. 85%) - power consumption: 60W~300W - noise: Below 60dB - temperature range: 0℃~+40℃ - humidity range: Below 20%~90% RH - outer dimensions: W125*H205*D110(standard KI-ED-22) | Equipment |
| 530 | Electric oil mist collector | Electric oil mist collector | Kunwootech Co., Ltd. | http://www.parada777.com.ne.kr/index.html | 1.Outline Electric oil mist collector is a package type of device capable of collecting high concentration oil mist that are generated in general bolt processes. transfer machines. large-sized manufacturing machines. or quenching. giving some advantages that the installation area is relatively small. the installation method is simple. and it is applicable as an air cleaner for removing indoor floating dust or mist. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000237-2.jpg></center> 3. Characteristics 1) Simple installation on the side of existing machinery 2) Reduction of installation cost for local exhaustion equipment by being placed in an oil mist generating source 3) High performance electric dust collector capable of treating more than 98 % up to 0.01 mm 4) Reduction of electric charges by low loss of constant pressure 5) Simple maintenance and movement 4. Application Indoor environment of plants and equipments from which oil mist is generated. | Equipment |
| 531 | Electric precipitator (dust collector) | DS_Green Tech | Electric precipitator (dust collector) Characteristics -High efficiency -Easy maintenance work -Low cost operation -Safety Apply - Industrial and/or electricity generation boiler -Incinerator -Cement plant -Steel and chemical plant | Equipment | ||
| 532 | Electric Sterilizer | Electric Sterilizer | SUNG JI IND Co., Ltd. | http://www.sungjiind.com | 1. Outline • This technology has higher efficiency for liquids than semisolids and has a more significant improvement effect on quality and shelf life as compared to the existing sterilization process. 2. Introduction 14Biz-83.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-83.JPG'>3. Character • High-tension electricity sterilization: destroys the cell membrane of microorganisms through a high-voltage magnetic field • No temperature increase on target contents and nutritional property change • Has a higher energy-saving effect as compared to the existing heat sterilization • An eco-friendly method without waste because of high-temperature processing 4. Applications • All kinds of liquid food group sterilization treatments • Refrigerated natural juice sterilization treatment • Dairy product sterilization treatment • Regular food sterilization treatment • Medicine sterilization treatment • Bio-product sterilization treatment |
Eco-Friendly Products |
| 533 | Electrical pipe type scum remover | Wonchang Entec Co., Ltd. | http://www.wontec.co.kr | 1. Outline & Application Electrical type scum remover is a device applied at primary and final settling tanks of water treatment facility at sewage/wastewater treatment facility. which can be applied at rectangular shaped settling tanks. The scum pipe where the upper part is 60 ˚~90 ˚ open will decline regularly due to the electrical driving equipment. which removes scum by flowing water and floating scum into the scum pipes. 2. Introduction 3. Characteristics * Relatively simple structure * Less mechanical operation as scum is removed through the flow of water * Less abrasion and able to use for a long time * Able to respond to water level change * Cheap price 4. Application - Removing scum |
Equipment | |
| 534 | Electricity-powered Siphon Typed Sludge Collector | Wontec Co., Ltd. | http://www.wontec.co.kr | 1. Outline & Application Electric-powered siphon typed sludge collector is a facility for member and material applied to the primary and final settling pond for water treating system purification / foul water /sewage treating plant. and applied to the settling pond whose constructional shape is a rectangle. The method that the motoring part on the settling pond reciprocates is the same as that of electricity-powered bridge type but electricity-powered siphon typed sludge collector sucks in sludge with a vacuum pump on a girder to remove the sludge in the settling pond. and any separate scum removing device should be installed to remove scum. 2. Introduction 3. Characteristics ① Removing massive sludge - Sucking in and removing massive sludge of low concentration. making use of a vacuum pump - Suitable for the settling pond whose length is long ② Easy operation and maintenance - As the main components of this collector are located above water. maintenance and repairing are feasible without draining water. ③ Clean discharged water - Discharged water is clean as this collector doesn’t disturb water. 4. Application - To apply this collector to the settling pond whose constructional shape is a rectangle |
Equipment | |
| 535 | Electrochemical Wastewater Treatment System | Electrochemical Wastewater Treatment System | Bautech Co., Ltd. | http://bautech21.com | 1. Outline - This product is an advanced wastewater treatment system adopting cutting-edge chemico-physical method instead of traditional biological treatment. This all-in-one type product realizes functions of large capacity reactor. cohesion tank and settling tank in a compact single unit. therefore needs no large scale sump. This system is suitable for non-discharge heavy water treatment for tertiary wastewater and washing water. 2. Introduction 3. Character - Compact wastewater treatment system certified and recommended by the Environmental Protection Agency. - Semi-permanent high-strength PE tank with 2.200 litter capacity. - Sterilizing and deodorizing effect with high-efficiency ozone generator. - Very small installation space (No large scale sump needed). - Bottom sludge remover. - Full automatic unmanned operation. - 20 micron cartridge filter and 140Kg carbon filter. - Installation cost only 30 to 50% compared to existing systems. - Inclination plate to accelerate floc formation. 4. Application - Washing water - Wastewater - Metal plating wastewater - Heavy metal treatment |
Equipment |
| 536 | Electrochemical Wastewater Treatment System | Electrochemical Wastewater Treatment System | Bau Tech, Inc. | http://bautech21.com | 1. Outline • Electric pulse water treatment method: applies electric energy to waste water that contains inorganic and organic electrolytes to electrically remove BOD. COD. SS. N–H. T–N. heavy metals. and other matters. • Most colloidal stale materials. including oil components. contained in waste water are negatively charged so that they do not repulse and float. The field is electrically neutralized by external electric energy. and flocculation reaction occurs. The oxidation–reduction process also occurs at the same time. 2. Introduction 14Biz-158.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-158.JPG'>3. Characteristics • Uses the flocculent settling method after giving electrical charges to highly concentrated wastewater that is hard to treat biologically or physically at the fluid state • Easy installation in small areas because of its compact size; it has an excellent response for change time-elapse of the inflow water because of constant treatment efficiency. • Designed to treat wastewater and zero-discharge water-reuse. such as treated water and washing water. because the water quality of the treated water is good • Easy maintenance and low treatment costs per ton compare to satisfactory the chemical precipitation method or the separation membrane treatment method; an economical and eco-friendly product as it recycles treated water 4. Application • Wastewater treatment |
Equipment |
| 537 | Electrode contact oxidation system | ECOS (Electrode Contact Oxidation System) | KUMHO Construction and Engineering Co., Ltd. | http://www.kumhoenc.com/ | 1. Outline This system is to decompose and remove aquatic pollutant materials. which are difficult in treatment by the existing systems. i.e.. sterilization. decolorization. deodorization. decomposition and removal of difficult-resolvable materials. using oxidizing materials (e.g. Hydroxyl radical. Superoxide radical etc.) of a great oxidizing power. which are generated by a direct contact between water and electrode. This system is a state-of-the-art technology having an excellent processing efficiency as generating various radicals during the decomposition process. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=IMP318-2.jpg></center> 3. Characteristics (1) It carries out treatment by generating strong oxidizing materials using only electricity without using chemicals. (2) It reduces maintenance costs and equipment costs as not using electrolytic membrane. (3) Cell is strong and easy to manufacture. and the system can be scaled up according to processing capacity. (4) It uses variable electrode agents (5) It can completely treat wastewater. (6) It can be applied to various wastewater. (7) It does not produce wastewater after the treatment. and not accumulate exhaust gas. (8) It can reuse generated gas. 4. Application Treatment of chemical wastewater. plated wastewater. livestock wastewater. food wastewater. seepage water and etc. | Technology & Process |
| 538 | Membrane Electrodialysis System | Electrodialysis Reversal (EDR) | Membrane Technology Co., Ltd. | http://www.mem-tech.com | 1. Outline The ED is a membrane electrodeionization system composed of ion exchange membrane and D.C power supply. This can deplete and concentrate in salt or ions. The EDR process is based on the classical ED process. But in the EDR process. the reversal of polarity result in a reversal of direction of the electrical ion movement and provides electrical flushing of scale forming ions and colloidal matter from membrane surfaces. This is the most advanced and reliable method available for desalting brackish well and surface water. 2. Introduction 2-1. Principle 1) Anion exchange membrane Charged positively and permeable to cations. 2) Cation exchange membrane Charged negatively and permeable to anions. 3) Direct current Driving force of ion transfer to electrode(Anions move to Anode. Cations move to cathode) 4) Rejection of ions Anion exchange membrane is only permeable to anions. Cation exchange membrane behave oppositely. We can produce deminerallized water. 5) Concentration of ions After Anions permeate anion exchange membrane. interrupted by cation exchange membra ne. Cations behave oppositely. 6) The reversal of electrical polarity The reversal of polarity result in a reversal of direction of the electrical ion movement and pr ovides electrical flushing of scale forming ions and colloidal matter from membrane surfaces. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000109_1.jpg></center> 3. Characteristics - The lowest fouling and scale forming - Zero chemical feed for normal operation - No waste water treatment system - High efficiency - Less operating and maintenance cost - Very compact 4. Application 4-1. The depletion of salt and ions - The production of potable and industrial water from brackish and sea water - Purification of underground and surface water - Demineralization and purification of organic substances - Removal of nitrate and nitrite - Reuse of waste water - The treatment of plating waste water 4-2. The concentration of salt and ions - The concentration of salt and ions - The concentration of organic acid | Equipment |
| 539 | Electromagnetic Flow Meter | EM1000 | Wintec Co., Ltd. | www.m-wintec.co.kr | 1. Outline - This electromagnetic flow meter is a high-precision electromagnetic flow meter which measures and displays an electromotive force via electrode that is generated by a fluid in a pipe with conductivity of more than 5㎲/㎝ by forming a magnetic field at the pipe. 2. Introduction 3. Characteristics - Convenient installation - An all-in-one system that combines a detector and a converter - Installation and use in a narrow space - Simple wiring structure - Possible direction change of a converter (0°. 90°. 180°. 270°) - Not to be installed in an area where vibration is severe. the temperature of a fluid is high and flooding is likely to occur. 4. Application - Flow Rate Measurement |
Equipment |
| 540 | Electromagnetic Flow Meter | Electromagnetic Flow Meter | SHINHAN PRECISION CO., LTD. | http://www.spic.co.kr | 1. Outline - Electromagnetic Flow Meter is a measuring instrument that applies Faradays law of electromagnetic induction which measures an electromotive force generated when fluid flows in a magnetic field and this Meter can measure various fluids ranging from general service water to food and beverage. sewage and wastewater and sludge regardless of temperature. density and pressure if the conductivity of the fluid is at least more than 0.5㎲/㎝. 2. Introduction 3. Character - Increased degree of precision due to the use of a full magnetic flux distribution method. - Rapid data processing using 160Bit-Microprocessor. - Remote Meter Reading. - Forward/Reverse measurement function. - Insertion of ground terminal in the inside of a pipe. - Prevention of malfunction. 4. Application - Electromagnetic Flow Meter. |
Instrument & Chemicals |
| 541 | Electromagnetic Flowmeter | FMAG550 | FnS Plus Co., Ltd. | http://www.fnsplus.com | 1. Outline - This electromagnetic flow meter realizes the measurement of flow rates using Faraday’s electromagnetic induction principle. When a conductor moves in the direction of cutting. at a right angle. the lines of a magnetic force with magnetic flux density B in the space of a magnetic field. an electromotive force is generated. Using this principle. if conductive fluid flows through a pipe with magnetic flux density B. it cuts the lines of the magnetic force. and it generates an electromotive force through installed electrodes. 2. Introduction . Character Power: AC 90V ~ AC 230V Pulse output: Opto – copler type Temperature input: 2 channel RTD input Nominal meter size: 10 ~ 1000mm Lining material: PTEE Conductivity: 5 us/cm and over 4. Application - Flow meter |
Equipment |
| 542 | Electromagnetic Waves Measuring Device (Nardalert S3) | Nardalert S3 | Top Instruments Co. | http://www.totop.co.kr/ | 1. Outline - This Electromagnetic Waves Measuring Device (Nardalert S3) is a small-sized and light-weight portable and easy-to-use measuring instrument. The system is durable and can be installed for real-time measurement. Thus. the product can suit both individuals’ and offices’ needs. 2. Introduction 3. Characteristics - The system can swiftly measure the strength of RF electric and magnetic fields on a real time basis. while employing a large-sized graphic LCD. - The system which adopts an electric field sensor exchange method based on the status of human health is cost-effective. - The system can easily measure electronic waves aimed at various RF electronic sources. - It is very easy to detect. -The system that relies on operation software (NS3-TS) can measure the data on a real time basis through the PC using a USB print out or optical communication (option). 4. Application - Electromagnetic Waves Measuring Device |
Equipment |
| 543 | Electronic scale controller | MINI BULKY - Electronic Scale Controller | Seaplant Co., Ltd. | http://www.komoeng.co.kr/ | 1. Outline This product is an environmentally friendly device to prevent formation of adhesive scale without adding chemicals by reducing adhesive force and precipitation property after changing a crystal type of scales. which are generated from pipes. boilers. domestic and industrial appliances by electronic waves. This product provides various effects. i.e.. reduction of energy consumption cost. installation of various systems. reduction of maintenance costs. conservation of mineral benefit to human bodies etc.. and is easy to operate and install. The existing products are bad in operation conditions as being installed by cutting and connecting the existing pipes. but this product is easy to use and install as being installed by coiling of the existing pipes. 2. Introduction Operation principle of the electronic scale controller is based on interaction between fluid type electric load of an ion state and electromagnetic field. That is. when 'ion' ingredients pass the electromagnetic field and a magnetic field. 'power' according to the Faraday Law is applied to each ion. power of opposite directions act to opposite 'ions'. and thereby. collision and contact between 'ions' are facilitated. so that formation of crystal is facilitated. So. this product can easily collect fine particles and soft scales in a predetermined area and remove them as the fine particles and soft scales are stable to heat and pass a cooling system or a heating system as they are without damage of the cooling system or the heating system. 3. Characteristics (1) It can be used when the minimum chemical materials are used or when chemical materials cannot be used. (2) It can be used when a light water softening device by ion exchange resin or lime soda cannot be installed due to a narrow site area. (3) It is used when particulate matters can be used in an aspect of process. (4) It is used at places where operations are frequently ceased for scale removal. (5) It can be used in long distance regions where it is difficult to maintain and manage. as it is difficult to supply chemicals and skilled manpower. 4. Application (1) Various piping networks and central heating systems (2) Greenhouses and irrigation systems of farm (3) Hot water and heating systems (boiler. steam system. radiator) (4) Water purification and drinking water systems (5) Pretreatment of ozone feeding system (increase of solubility of ozone) (6) Pretreatment of reverse osmosis system (Reduction of scale fouling by CaCO₃) | Instrument & Chemicals |
| 544 | Electro-Osmosis Dehydrator | EOD-S,B | Fine Tec Inc. | http://www.fine-tec.com/eng/ | Overview of the Electro-Osmotic Dewatering Technology Electro-dewatering brings solid-liquid phase separation beyond what can be achieved by mechanical technologies. Adsorbed water cannot be extracted by mechanical dewatering due to the solid’s particulate size and strong bonding forces. The EOD technology relies on the application of an electrical field across the sludge. inducing electro-osmosis across the porous media and pulling on the water molecules instead of pushing on the sludge. By draining out adsorbed water. our equipment can typically reduce residuals’ volume by 50–75%. The Principle of Electro-Osmotic Dewatering Technology The application of an electrical field induces electro-osmosis across the porous media. pulling on the water moleciles instead of pushing on the sludge. - Electrophoresis → Sludge particle moves - Electroosmosis → Separate moisture moves - Capillary Pressure - Coulimbic Heating Special Feature of Electric Dehydrator - Reduce the weight of sludge to 50% - Moisture content of cake meet 50-60% - Increase efficiency dehydration through improved cathode - Improved consumption of electric power - Excellent dehydrator ability of the utmost flowing sludge - Zero failure rate with the reduced parts - Decrease in water consumption through improved rinse method - Reduction in cost due to omitted filtering paper | Equipment |
| 545 | Electrostatic collector | Handok Eng Co., Ltd. | http://www.handokeng.co.kr | 1. Outline The equipment separates electric charged particles in electric field from gas using electric force through electric charge of fine particulate matters suspended in exhaust gas by generating CORONA discharge through high-voltage direct current. In other words. this equipment collects particles (mist. dust and fume) through electrostatic force. 2. Introduction 3. Characteristics - Remove both gas and dust at the same time - High efficient discharge sector design: Multi-Star-Point - High collection efficiency: Up to 99.99% - Rectangular Type - Strong Corona electric field - Water Film System - Firm Electrode - Compact Design / Smaller installation space - Wide selection of material - Numerous on-site experiences - Dust collection space per unit space is large - Twice larger than the existing size - Maintain center of stable collecting electrode - Equally distributed electric field - Reduced maintenance time/ cost 4. Application - Car painting process - Semiconductor manufacturing process - Desulfurization equipment - Fly ash control - Power plant - Ammonia control - Dryer/ boiler - Coke oven - Textile manufacturing process - Pulp and paper manufacture process - Compressed wood dryer - Glass furnace - Waste heat recovery facility - Waste incinerator - Sulfuric acid gas - Rotary kiln - Cement manufacture process and furnace - Sludge incinerating process - Oil Mist treatment - White Smoke treatment - Blue Smoke treatment |
Equipment | |
| 546 | ELECTROSTATIC PRECIPITATOR | DAELIM A.E. Electric dust collector | DAELIM A.E CO., LTD | http://www.dl3700.co.kr | 1. Outline Electric dust collector is a device for collecting dust using electromagnetic force of high voltage. 2. Introduction Electric dust collector includes a discharge electrode. a dust collection electrode. a high pressure generator. a striking rod. and a hopper. The roles of the discharge electrode. the dust collection electrode and the high pressure generator are very important. The discharge electrode causes corona discharge. and then. ionizes treated gas. so as to charge dust with electricity and make electronic field. The dust collection electrode is in the form of a cylinder or plate. and collects particles electrically charged by the discharge electrode. The high pressure generator generates electrostatic force to dust to be removed between the dust collection electrode and the discharge electrode. . 3. Characteristics 1) Dust collection performance : Collection to fine particles of about 0.01μ. and collection to 0.01g/N3 or less of an inlet dust collection amount 2) Low loss of pressure : Saving of electric power due to low loss of pressure of about 30mmAq 3) Use temperature : Excessive cooling of exhaust gas is not required as kinds of machines usable in DHSESH of 350°C or more are developed. 4) Easy control and management : Dry type does not need the wastewater treatment and is easy to operate. 5) Easy repair and maintenance : It is easy to repair and maintain due to its simple structure. 6) High efficiency : It has a high dust collection efficiency even in a low dust concentration. 4. Application 1) Packed Towers 2) Venturi Scrubbers 3) Wet Clone and Absorbers | Equipment |
| 547 | Electrostatic Precipitator | Electrostatic Precipitator | EPiT Co., Ltd. | http://www.epit.co.kr | 1. Outline - An electrostatic precipitator consists of discharge electrodes. collecting electrodes. rappers that release dust particles deposited on the discharge electrode and the collecting electrode. and hoppers into which dust particles are dislodged. A high-voltage direct current creates the inter-electrode region between the discharge and the collecting electrodes. generating a corona discharge. The particles in the gas that flow between the electrodes become negatively charged (-) and the charged particles are moved and collected on the collecting electrode(+) by the Coulomb force. 2. Introduction 3. Character - Economic and solid design. - Energy-saving design. - Optimized design suitable for the site. - Simpler maintenance. 4. Application - Dust collector |
Equipment |
| 548 | Embossing Fabric Form | TAE JIN SOILTECH Inc. | http://www.geotube.co.kr/ | 1. Outline • Embossing Fabric Form is a soil fabric system that is used for temporary dikes. temporary roads. and closing constructions using sand filler. and prevents the erosion of the slope of rivers. • This method does not use a mortar as filler (environmental pollution and waste treatment costs) and mixes fly ash with sand to use it as filler. 2. Introduction 14Biz-479_Embossing_Fabric_Form.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-479_Embossing_Fabric_Form.jpg'>3. Characteristics • It allows for construction in a large area in a short period of time. • It can be easily and economically installed compared to other construction methods. • It can be constructed on uneven ground. • It can be constructed on water. • It can be constructed onthe protection area of a water supply source because of the development of the sand filling method. • It saves waste treatment costs because sand is used for filler. 4. Application • Construction to prevent the erosion of the slopes of dams. bank protections. and rivers • Repair and bank protection works of agricultural drainage systems • Bank protection works of sea banks. reclaimed lands. and embankments • The latest eco-friendly method applied to cutting areas around roads using lawns and vegetation |
Technology & Process | |
| 549 | Embrain Imuf | Embrain Imuf | Hyokwang E&C Co., Ltd | http://hyokwang-enc.com | 1. Outline - ImUF system has further evolved involving an impregnated filtering membrane that enables backwashing for the first time in the world. The performance has further improved since a corrugated cardboard type of feed spacer. generally used to secure space among membranes. replaced a net type of feed spacer. The use of a corrugated cardboard type of feed spacer prevented any blockage from being seen even in the face of higher-content SS conditions. guaranteeing more spacious use of an effective filtering membrane area. upgrading filtering rates per area. reducing installation are and increasing efficiency of air cleansing. 2. Introduction 3. Character - No blockage even in the face of high-content SS. - Increased effective flux area. - Increased flux rate by area. - Improved air cleansing effect. - Decreased installation area. 4. Application - Recycling of sewage & wastewater. - Treated water supply. - Reuse of rainwater. - MBR. - Treatment of leachate in landfill sites. - Water supply. - RO pre-treatment. |
Equipment |
| 550 | Emission Gas Measuring Instrument | Emission Gas Measuring Instrument | DASAN RND CO., LTD | http://www.dasanrnd.co.kr | 1. Outline As a device measuring 5GAS emitted from gasoline/LPG cars. this Emission Gas Measuring Instrument measures HC (hydrocarbon). CO (carbon monoxide). CO2 (carbon dioxide). O2 (oxygen). and NOx (nitrogen oxide). 2. Introduction 3. Characteristics - Operable by being connected to a RS-232 PC or usable in standalone - Equipped with a water trap device (water separator) - Equipped with a heating device for winter - CO : 0.00 ~ 10.00 % - HC : 0 ~ 10.000ppm - CO2 : 0.00 ~ 20.00 % - Lamda : 0.50 ~ 2.50 - O2 : 0.00 ~ 25.00 % - NOx : 0 ~ 5.000 ppm - Operation temperature: operates at temperatures between -10 ~ 40 ℃ - Transmit measured emission gas data once per second - Repeatability: within 2% (maximum calibration gas) - Continuity: within 2% (maximum calibration gas) - Response speed: response more than 90% of the time in 10 seconds 4. Application - Measure emission gas |
Equipment |
| 551 | EnDsel?-PF | EnDsel?-PF | E&D Solutions Inc. | 1. Outline EnDsel?-PF is the equipment that can remarkably reduce particulate matters (PMs). carbon monoxide. hydrocarbon. etc. that are discharged from diesel cars. Exhaust gas that is collected in a filter with a special structure is discharged after its harmful substances are decomposed by a catalyst which is coated in a filter that is developed by E&D Solutions Co. 2. Feature - Single structure: A single structure that does not require pretreatment unlike existing technologies. - Low temperature: Operable in a low temperature area due to excellent performance of the catalysts which are developed by E&D Solutions Co. - Miniaturization and weight lightening: A structure that does not requires additional pre treatment. - Convenient installation: Convenient installation due to miniaturization and weight lightening. - Stability: Free from danger by additional equipment due to continuous regeneration that uses catalysts and the minimization of vehicle performance degradation. 3. Introduction 4. Application - Buses and large trucks |
Equipment | |
| 552 | Direct Fired Air Handling Unit | Direct Fired Air Handling Unit | Korea Tech Engineering Co., Ltd. | http://www.hkeng.co.kr | 1. Outline A slightly pressurized building and elimination of floor to ceiling temperature stratification greatly enhances employee’s comfort and productivity and dramatically reduces building heat loss. Reducing stratification by utilizing high rates of building air change has been a widely accepted means of achieving the benefits of a more comfortable workplace. while maximizing energy savings. 2. Introduction This is known as the air turnover principle. Floor to ceiling temperature stratification and its negative effects are virtually eliminated. Direct gas fired system are well known for safety and reliability. Long lifetime and high efficiency are accepted facts. Efficiency does not reduce with age. 3. Characteristics - Energy efficiency - Low initial cost - Low installation cost - Low operating cost - Low maintenance cost - Dependable operation 4. Application - Manufacturing plants - Distribution centers - High bay building - Sports complex - Aircraft hangars - Schools - Hospitals - Steel mills - Paper mills - Automotive assembly plants - Food processing plants | Equipment |
| 553 | EnPol G8060, G8060F, G4560, G4560J | EnPol G8060, G8060F, G4560, G4560J | Ire Chemical Lim | http://www.irrhsc.com/ | Product Description EnPol polymers. produced through the polycondensation reaction of glycols and dicarboxylic acids with IRe’s self-developed catalyst and process technology. are biodegradable thermoplastic resins. We produce and market a biodegradable aliphatic. aliphatic-aromatic copolyester under the trade name of EnPol. 100% biodegradable EnPol has the same qualities as Nylon. PE and PET. However. if fishing gear made of EnPol lost at sea. it not only prevents ghost fishing but. also. protects the marine environment. Product Feature EnPol polymer are stable in the atmosphere. but biological decomposition commences when exposed to bacteria or fungi and moisture. Living micro-organisms transform EnPol polymers into water. carbon dioxide and biomass. EnPol polymer completely decompose in normal composting conditions without any harmful by-products. and harmless to the environment at every stage of decomposition process. Product Specification Models 1. EnPol G8060 [PBAT (Polybutyleneadipate-co-butyleneterephthalate)] - It has an elastomeric property and outstanding elongation. (it is most suitable for film manufacture.) 2. EnPol G8060F [G8060 + biomass] - It is a bio-degradable high molecule. which is properly improved for various films using G8060 asmain raw materials in order to manufacture high-quality film. 3. EnPol G4560 [Poly(butylenes succinate). PBS] - It is a bio-degradable high molecule. whose mechanical property can be a adjusted by changing melting flow index (M.F.I) depending on the purpose of product in polycondensation process. 4. EnPol G4560J [Poly(butylenes succinate). PBS] - Its basic molecule structure. Tm and specific gravity are same as those of G4560 but its MI is higher than that of G4560 as 20 so it has a good flow characteristic. Application Disposable goods cup. knife. spoon. fork. razor. straw. golf tee. etc. Films : compost bag. trash bag. shopping bag. packaging film. shrink film. blister film. etc. Agriculture and horticulture : mulch film. plant pot. rope or string. clip. etc Fishing Gear : Fishing net. Fishing trap. Rope. Fishing Line Containers : tray. food containers. bottles(shampoo. detergent. beverage). etc. | Eco-Friendly Products |
| 554 | Environmental IT System Development | Environmental IT System Development | 1. Outline - Greenpolaris Co.. Ltd. provides a GHG Inventory IT System that registers and manages GHG emitted from business activities and saves emission information by building a database for the purpose of providing them so that they can be utilized for business activities. It is GHG management system that integrates maintenance. management and improvement of GHG monitoring. 2. Introduction 3. Characteristics - Platform specialized in GHG emission calculation. ㆍEstablishment of the complex/convergence service development environment so that various service models related to environment can be implemented. ㆍClassification and stratification of a unique function including service logic and service management. - Standard interface system. ㆍDevelopment of system standards focusing on requirements for providing GHG emissions management services. - Statistical Management. ㆍStatistics. emission unit analysis. QA/QC evaluation data. evaluation on database and assignment achievement. provision of various reports. 4. Application - Environmental IT System |
Evaluation & Analysis | ||
| 555 | Environmental Material System | BIO PARASO SYSTEM | KyungDong Ceratech Co., Ltd. | http://www.kdceratech.co.kr | 1. Outline BIO PARASO SYSTEM is the best custom-made artificial- ground afforestation solution to meet the 21st century green network. as it provides the most suitable plant growth condition. Its organic system consists of soil layers such as BIO PARASOTOP. BIO PARASO cultivation and water-supply system. providing a permanent green area on artificial ground. 2. Introduction 2-1. System Configuration and Physical Properties <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000090_1.jpg></center> 3. Characteristics 3-1. Provides various plant growth conditions - By utilizing functional perlite. solves the problems of the current PARASO without additional organic substance and facilitates a healthy plant growth. - By controlling a CEC (Cation Exchangeable Capacity) and nutrients. any plant is applicable. 3-2. Natural color and function - BIO PARASOTOP has a natural brown soil color. protecting it from a scattering of dust. - Brings down nutrients to the lower soil layer. an upgraded next generation surface layer as compared to current the BARK and MASA. 3-3. No loading weight problem - The loading weight is below 450㎏/㎥ even in saturation. making it lighter than the previous PARASO (at 600㎏/㎥) and normal soil (at 1.800㎏/㎥). - As per bridge phenomenon between soil particles and numerous roots. the root holding power is remarkable. minimizing the soil depth. As a result. the planting of big tree (soil depth; 40㎝. 180㎏/㎥) is possible even with existing buildings(200㎏/㎥). <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000090_2.jpg></center> 3-4. 100% Inorganic artificial soil - As organic substances are not included. an aging plant over growing and water flow plugging do not occur permanently. 4. Application - Normal Landscaping for trees (tall tree and bush). flower and lawn - Lawn for existing or new building - Flower garden for existing or new building - Landscape for apartment balcony and gallery | Technology & Process |
| 556 | Prediction Model for Train Noise | Prediction Model for Train Noise | Korea Railroad Research Institute | http://www.krri.re.kr | 1. Outline As the first stage of developing prediction model for train noise. Mugungwha train. which has the loudest noise among existing trains. was selected for the research. 2. Introduction - Noise prediction model was developed by taking into account the number of a locomotive and a passenger coach. duct distance length. and frequency of train passing. - Merits and demerits of technologies regarding train noise prediction were analyzed in order to adopt the most suitable technology for domestic conditions. - Noise of Mugungwha train was analyzed and the data was put into database. - Sound exposure level and contribution rate of noises were analyzed. 3. Characteristics - Noise was measured in 5 areas by heights and distances. - Sound pressure level was analyzed by recording the noise at distances of 15 m. 25 m. 50 m. and 100 m. - Noise recording began before the train approached a microphone and during the train passed. Collected data was used to analyze variation in sound pressure level. - Lmax and sound exposure level during the train passing was analyzed. - It is possible to separate power noise or engine noise and rolling noise produced between wheel and rail by using the prediction model. 4. Application - Environmental impact assessment - Dealing with civil petitions - Designing a railway with low cost | Evaluation & Analysis |
| 557 | Environmental Pollution Treating Agent | Miracle | Haechun Bio Co., Ltd. | http://www.haechunbio.co.kr | 1. Outline - This Miracle is a biological environmental pollution treating agent which is a mixture of a super micro-organism composite group. yeast-fermented low-molecular-weight proteins. nucleic acids and biological surfactant. and a vegetable natural microorganism material fermented in the combination of two kinds of micro-organisms. 61 kinds of fruit and plant enzymes. biosurfactant. and stabilizer as well. 2. Introduction - Micro-organism: To decompose malodorous substances. - Enzyme: Malodorous substance decomposition catalysts. and micro-organism nutrient salts. - Biological surfactant: Malodorous substance decomposition promotion. - Stabilizer: To prevent the temperature deformation of kinds of Amino acids and enzymes. - Nucleic acids: To prevent the denaturalization of fermenting enzymes and low-molecular-weight proteins. 3. Character - Treatable substances: Oils. lead. cadmium. hexavalent chromium. zinc. copper. ammonia. and hydrogen sulfide. - Odor: To eliminating fundamental causes of odor by adsorption and removal of malodorous substances such as livestock excreta. sewage sludge. landfill sites. leachat. etc. - Water quality: To diminish or improve BOD. COD. TSS. and turbidity by the insertion of Miracle to polluted waste water. - Soil: Soil purification by applying eco-friendly micro-organism materials to soil washing methods. - Hexavalent chromium: Enzymes existed in Miracle itself have strong reducing power enough to reduce Cr6+ to Cr3+. 4. Application - Odor abatement. - Water quality improvement. |
Instrument & Chemicals |
| 558 | Environmental radiation monitor | PA-1000 Radi | Korea Horiba Co., Ltd. | http://www.horiba.com | 1. Outline - Easy and convenient environmental radiation monitor in any where 2. Introduction 3. Characteristics - Light and compact hand type - Environmental radiation gauging in everyday life - Uses environment friendly plant plastic - Uses solid CsI(Tl) as detector. Realizes high performance. long life cycle. high reliability 4. Application - Radiation gauging test in environment education - Environmental radiation gauging in everyday life |
Equipment |
| 559 | Environmental Vibration Meter | VM-1220E | Kine Industrial Co., Ltd. | http://www.e-kine.com | 1. Outline - This Vibration Meter measures vibration from construction sites. railroads. road traffic. bridges. ground. explosions and various environmental sources and is also used to measure human exposure to a whole-body vibration and shock in the buildings (ISO 2631-2). 2. Introduction 3. Characteristics - Simultaneous measurement for two vertical directions (X. Y) and three horizontal directions (Z). - Calibration by a user as a calibrator is externally installed. - Not affected by humidity and dust on the ground as the design resembling a sound level meter allows this Vibration Meter to be mounted on a tripod. - Printout using basic software or a printer for output on the spot (option). 4. Application - Use in accordance with the Standard Methods for Measuring Noise and Vibration.. - General use in various construction sites. road traffic. railroads. ground vibration and etc. |
Equipment |
| 560 | Environment-Friendly Lighting System | Environment-Friendly Lighting System | Taeil Magnetics Co., Ltd | http://www.tmctech.co.kr | 1. Outline - Next-generation independent lighting system involving solar batteries. high- efficiency environment-friendly LEDs and a wind power generator with a vertical pole. 2. Introduction 3. Character - Operable under any weather conditions by simultaneously using wind and solar energy. -Shell vertical-rotating typed Spire Wind Turbine that can be operated wherever wind blows. -Equipped with blades and generators made of special materials that can be adaptable to urban environment characterized by the low-speed of wind. - Incorporating solar batteries and LED chips reliable enough to maintain durability. 4. Application - Environment-friendly lighting system. |
Equipment |
| 561 | EPit Wrinkle Bag | EPit. Co., Ltd | http://www.epit.co.kr | 1. Outline • It is more efficient in removing dust due to expansion/ folding-out of wrinkle than ordinary bag and its dust removing period is relatively long due to its low differential pressure by its high dust removing efficient • Since there is almost no basic material stress by pulsing air. it may reduce operational costs 2. Introduction 14Biz-461_EPit_Wrinkle_Bag.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-461_EPit_Wrinkle_Bag.JPG'>3. Character • Compact B/F design • To reduce investment costs by 35 to 50% • To reduce operational costs by 35 to 40% • To have 1.5 to 2 time longer product life than round bag • To reduce replacement costs by 50% or more 4. Application • Equipment to collect dust for prevention of air pollution |
Equipment | |
| 562 | e-saver | Boo Sung Engineering Inc.. | http://www.boosungeng.com | 1. Outline • It offers energy conservation effected by recovering and reusing waste heat. • It does not vibrate while driving by using the new way of dustproof case. Apply eco-friendly manufacturing method by using a soundproof insulation case using air layer instead of insulation method relying on insulation heat conservation only. 2. Introduction 14Biz-127.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-127.JPG'>3. Character • It promotes energy conservation. • It saves ventilating drying energy up to 90%. • It improves the working environment. • It increases cooling efficiency and reduces noise significantly in summertime because of the low temperature of fan and duct. • It improves product quality. • It applies pre-filter and medium filter as standard features to supply clean and dry air. • It increases dust collection efficiency. • It increases dust collection efficiency of activated carbon since the exhaust heat source is about 20°C–30°C. • It increases dry efficiency. • It uses pure heat source excluding residual solvent. • It reduces carbon emissions • It uses clean electric energy and 20% of existing electric heater. 4. Application • Waste heat recycling |
Equipment | |
| 563 | Eurolyzer ST | Eurolyzer ST | BYTECC | http://www.bytecc.com | 1. Outline - Eurolyzer ST realizes ‘Good Design’ for the combustion efficiency measurement instrument. The product applies touch screen TFT color monitor. 2. Introduction 3. Characteristics - Able to measure combustion gas & efficiency. pressure and temperature all at one time (Three-in-one-instrument) - Easy operations by using the touch screen. - Bright and clear TFT color monitor - Measured values are expressed on the screen in different colors (combustion gas=green. temperature=blue. pressure=yellow) - Able to install micro SD card (option= maximum of 4GB) - CO measurement through H2 correction (Max 9999ppm) - Multi tasking function display (Call other function during measurement without change in screen) - Separation function that enables separate individual usage as pressure measurement device and thermometer. - NiMH charge battery usable for 8 consecutive hours - International standard plug connector system - High quality. satisfactory price 4. Application - Measure combustion gas & efficiency. pressure and temperature |
Equipment |
| 564 | Evacuated solar water heater | GSOL-TH340V | Grand Solar Co. Ltd. | http://grandsolar.co.kr | 1. Outline -Significant reduction of convective heat loss at the absorber plate by using vacuum technology and collector. a kind of maintaining a solar collector in a vacuum glass. 2. Introduction 3. Characteristics -By injecting the above converted material in the high purity copper pipe. high temperature heat can be converted in low sunshine amount -Increase performance by improving vacuum pipe with three layered coating and maximize heat collecting efficiency by lowering radioactivity -Maximize heat conduction by using highly pure electrodeposit copper. minimize heat loss by using polyurethane and rock-wool heat preserver 4. Application -Supplementary heating and large size water heating -Solar heat water heat for homes |
Equipment |
| 565 | Wastewater Evaporator | ENVOTECH | Grenex Co., Ltd. | http://www.igrenex.com | 1. Outline Waste water is separated into distillate (clean water) and a waste concentrate of only 3 - 15% of the original quantity. The distillate is so clean that it can be discharged into the sewer or - even better - recyled in production. Extensive technical preexaminations prove the quality of the distillate. Anayses are performed by both EnvoTech and accredited laboratories. The analyses are selected in cooperation with the customer. and in accordance with current environmental requirements. 2. Introduction 2-1. Process The principal of the EnvoTech unit is evaporation. and it operates on the basis of mechanical vapour compression combined with coalescence-separation. The unit is divied into a cold and a hot zone. The hot zone is insulated in order to minimize heat loss to the surroundings. Start-up and operation is fully automatic. Water water is supplied to the holding tank via a self-priming feed pump through two heat exchangers where the incoming waste water is heat exchanged with the outgoing distillate and blow-off gas. In the starting phase the waste water is heated by electric heating elements. until the working temperature of approx. 100oC has been reached. The heating elements are then used only to compensate thermal loss to the surroundings. The waste water is circulated through the dirty side of the evaporation heat exchanger. When the operating temperature has been reached the compressor starts automatically. whereby the produced vapour is drawn from the holding tank through the mechanical foam breaker. The compressor increases the pressures of the vapour and thus also its temperature before the vapour is transferred to be condensed on the clean side of the evaporation heat exchanger. The energy released by condensation is used to evaporate the waste water on the dirty side of the evaporation heat exchanger. Thus energy circuit is closed. The distillate is now led to a coalescer. where any non-polar substances transferred during the evaporation are separated. From the coalescer the distillate leaves the unit through the large heat exchanger where it is heat exchanged with the incoming waste water. 2-2. Technical Data <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000122_1.jpg></center> 3. Characteristics 3-1. Features and Benefits - High degree of separation - Low energy consumption - Clean water for recycling or discharge - Compact design and simple installation - Continuous. automatic operation - Easy maintenance 3-2. Operating costs - EnvoTech units are optimized to use a minimum of energy. - The power consumption for treating 1 ton of industrial waste water is approx. 25kWh. 4. Application - Wastewater from alkaline cleaning - Cutting fluids - Rinsing waste from surface treatment - Oil-bearing wastewater - Washwater carrying Teflon and heavy metals | Equipment |
| 566 | Evaporation concentration facility | TVR TYPE VACUUM EVAPORATION CONCENTRATOR | SEHWA ENSTECH Co., Ltd. | http://www.hisamtop.co.kr | 1. Outline The present system is an evaporation concentration system of a thermal vapor-recompressed type in which a high-pressure steam is supplied to an ejector and vapor evaporated by a concentrator is absorbed by an ejector so that it can be used as an evaporation thermal source. 2. Introduction A basic principle of the concentration system is almost same as a MVR type concentration system. It is merely classified into a MVR type concentration system is used if a method of keeping a high thermal efficiency by generating latent heat of evaporation energy in the concentration system itself uses a mechanical high compressor. and a TVY type concentration system is used if the latent heat is supplied to a steam ejector and vapor evaporated in the concentrator is used. (See fig 1) 3. Characteristics 1) As a high concentration and high non-point material is contained. the present system is suitable for a system for concentrating a material of a high non-point. 2) A high process capacity and a low power. 3) As evaporated vapor is used to generate latent heat and to evaporate circulating materials. high energy-saving effect is obtained. 4. Applications It is suitable for high-concentration wastewater having a high possibility of scale. | Equipment |
| 567 | Evaporation-free (low concentration sludge evaporator) | ARK Co., Ltd. | http://www.ar-korea.com/ | 1. Outline - Evaporation-free (Disk Type evaporator) agitates extra sludge on the bottom of evaporator with special devised equipment. - Therefore. it transforms sludge on the bottom of evaporator into hard pluck and moves into the upper part. It makes bigger pluck. Bigger pluck is concentrated in the process of extruding filtrate. which is separated from sludge through filtrate extruding equipment. Filtrate goes into the treatment place through filtrate outflow part and concentrated sludge is provided to dehydrator. 2. Introduction 3. Characteristics - Control sludge concentration as consistent concentration under 3% by controlling the outflow amount with telescope valve. - It can highly concentrate for general low concentration active sludge. so it can increase the treatment amount and moisture content when combined with the existing belt press. centrifugal dehydrator. - It spins slowly under 30 rpm. compared to other company’s centrifugal evaporator (spinning speed: 3.000 rpm) It is quiet and rarely has a vibration. - Centrifugal evaporator power is about 1.5kw. compared to other companies. about 37kw (average 20m³/hr) It is highly energy-efficient. almost up to 5%. - Not like existing evaporator. it draws active sludge directly; it can solve the offensive odor issue. which is produced in undercurrent trillion and concentration sludge thickener. It also can reduce the amount of construction expense. which is used for building undercurrent trillion and concentration sludge thickener. 4. Application - Disk Type evaporator |
Equipment | |
| 568 | Evaporative Humidifier | Evaporative Humidifier | Daeyang Hi-Tech Co., Ltd. | http://www.alphawater.co.kr | 1. Outline • This evaporative humidifier purifies the air by removing foreign substances during the process in which water and air combine through natural convection and accurately maintains an ideal indoor humidity through evaporative humidification with fine humidification particles (0.0024 µm; electrode type. 2–5 µm). • It is an all-in-one humidifier with a multifunctional mounting evaporative humidifier. an air purification system. a fully automatic water purification system. and an alpha system for scale inhibition. It completely solves several issues of existing industrial humidifiers. 2. Introduction 14Biz-167.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-167.JPG'>3. Characteristics • Good efficiency of humidification through evaporative humidification • Reduction of energy and maintenance costs • Low power consumption (20-kg/hour product power consumption: 1.210 W) • Recycling of water used for humidification • No glucose appearance • Less chance of malfunction and low maintenance costs • Disinfection by the UV disinfection device • Air cleaning function (free filters and electric dust collectors) • Leakage protection system (prevents leakage) 4. Application • Computer rooms. laboratories. and research facilities • Areas. such as electronics and semiconductor factories. in which an accurate humidity control is required |
Eco-Friendly Products |
| 569 | Excess sludge reducing system. | Excess sludge reducing system. | Excess sludge reducing system. | 82-31-355-2300 | 1. Outline - This new auto-oxidation-typed product uses a new technology named the “Activated sludge process.” By using existing aeration tank and new chemical named “Soless”. which strengthens microorganism’s power and dramatically reduces excess sludge. it can solve sludge disposal problems(landfilling. ocean dumping. and incineration). 2. Introduction 3. Character - Using an environment-friendly liquefied burning method which maximizes the microorganism’s ability. - Auto-oxidation and self-reducing sludge system. suppressing materials which can be changed to sludge. - Reduces sludge disposal amount and sludge disposal cost - Expense saving: inexpensive system cost and running cost. - Compact design - No additional maintenance - The system adjusts and adds natural substance’s concentration. - Easy to use - Maintenance is enough to add the chemical. which uses polyphenol as the main ingredient. - Cost reduction - Saves electricity fees. coagulant chemical costs and labor costs. etc. 4. Application - Sewage treatment plant. |
Technology & Process |
| 570 | Exhaust gas reduction device | CH-PDPF | Ceracomb Co., Ltd | http://www.ceracomb.com | 1. Outline - Type2 device which removes particulate matters and toxic gas emitted from diesel vehicle engines. and it reduces exhaust gas by over 50% 2. Introduction 3. Characteristics - High performance catalyst with maximized dispersion of precious metals - Minimize pressure drop and fuel efficiency fall by using partially opened filter structure - Excellent performance at low speed driving - Easy installation and simple maintenance 4. Application - Exhaust gas reduction for diesel vehicles |
Equipment |
| 571 | Explosion-proof Electromagnetic Flow Meter | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline This electromagnetic flow meter is a device applying Faradays law of electromagnetic induction which is a principle of measuring electromotive force generated when a fluid flows in a magnetic field. This flow meter can measure a variety of fluids ranging from general top water. food and beverage. waste water to sludge regardless of temperature. density and pressure of liquids with minimum conductivity of more than 0.5㎲/cm. 2. Introduction 3. Characteristics - This electromagnetic flow meter is a flange type applicable to the pipes with a size ranging from minimum 6mm to 600mm and can be manufactured for various sizes (ANSI. DIN. and JIS). - This product features a wide measurement range from 0.03m/sec to 10m/sec. which has a use range of approximately 330:1. - Especially. the product’s degree of precision is very high as it amounts to 0.25% of an instantaneous value. 4. Application Explosion-proof Electromagnetic Flow Meter |
Equipment | |
| 572 | External Electrode Fluorescent Lamp | External Electrode Fluorescent Lamp | EI Lighting Co., Ltd. | http://www.eilighting.com | 1. Outline Unlike conventional fluorescent lamps. an External Electrode Fluorescent Lamp (EEFL) produces light from plasma induced by an electric field of its external electrode. EEFL is a new generation fluorescent lamp which generates less heat and lasts five times longer than general fluorescent lamps. 2. Introduction 3. Characteristics - Last five times longer than conventional fluorescent lamps and three times longer than other lamps. - Cost saving thorough minimum need of maintenance - Less than 60 percent power consumption compared with normal lamps. guaranteeing high efficiency and cost saving - High voltage and fire safety - Even one lamp goes blackout by external shock or mishandling while the other lamps are not affected. - Less heat generation from a tube minimizes damage to photo. film and other heat sensitive products. - Prevention of heat-induced discoloration 4. Application - Fluorescent lamp |
Technology & Process |
| 573 | Facilities to Produce Organic Carbon Sources | Facilities to Produce Organic Carbon Sources | Finereformance Ltd | http://www.reformance.co.kr | 1. Outline • To require a cheap external carbon source because of the increase in maintenance costs of expensive pure substance external carbon source • Insufficient improvement in treatment plant load and denitrification because of the use of external carbon source that is not treated • To require an improved external carbon source similar to pure substances external carbon sources. such as methanol and others 2. Introduction 3. Character • Highly efficient nitrification and denitrification • Removal of active non-gradable COD • Reduction of maintenance costs of treatment plants and stable supply of carbon sources • High C/N ratio (more than 40) • Containing more than 80% organic acid • Removal of distillate by preprocessing and containment of a great quantity of beneficial microorganisms • Five times more economical comparing to methanol without flammability or toxicity 4. Application • Sewage treatment plant • Advanced treatment plant • Treatment of wastewater with high nitrogen content | Equipment |
| 574 | Facility by adsorption | Facility by adsorption | Yujin C&E Tech | http://www.yujincetech.com | 1. Outline - This method absorbs and removes the harmful compounds by using the features which the gas and steam are attaching to the surface of porous solids. - This facility uses the features which the molecule and atom of air attach at the surface of solid. 2. Introduction 3. Characteristics - Relatively wide range of application due to the simple equipment. - Cheap installation cost and easy management. - High removal efficiency ratio for low concentration gases (low adsorption efficiency for high concentration gas) - It is necessary to exchange the absorbent regularly. - The adsorption efficiency is low when the emission gas temperature is high (more than 40℃) 4. Application - Painting industry - Ascon industry - Paper making and printing industry - Petro-chemical industry - Fiber and leather industry - Foods and medicine-making industry - Grain and feed industry - Wastes-collecting facility of apartment complex - Industry producing various organic solvent and odors |
Equipment |
| 575 | FCTO700W | FCTO700W | MAT | http://www.mat.co.kr/ | <li>Flameless Catalytic Thermal Oxidizer</li> <li>Minimize NOx emission and Carbon dioxide</li> <li>Increased efficiency for NF<sub><font size=2>3</font></sub>. SF<sub><font size=2>6</font></sub> of PFC Gas</li> <li>High temperature accumulate at catalyst<br /> (Stable gas removal efficiency vs. Flow rate fluctuation)</li> <li>Excellent for 2nd byproducts of odors</li> <li>Self heat recovery system makes Energy Saving with low running cost</li> <li>Easy Maintenance with PM and Cleaning. No need to chamber open</li> <li>Automatic PLC control with Touch screen </li> <li>Certified CE Mark</li> <div> </div> <div> </div> <li><strong>Power :</strong> A/C 200~240V. 1phase. 60Amp </li> <li><strong>CDA :</strong> 4~7kgf/cm²(200slm). 1/2″Tube</li> <li><strong>N₂: </strong>4~7kgf/cm²(30slm). 1/4″Tube</li> <li><strong>LNG : </strong>1~3 kgf/cm²(5ℓ/min). 3/8″Tube</li> <li><strong>City Water : </strong>3~5 kgf/cm²(2ℓ/min). 3/8″Tube</li> <li><strong>Gas Inlet : </strong>NW50 Flange 4ports</li> <li><strong>Drain : </strong>Acid Drain 1) Power Drain : 16A PVC Pipe</li> <li><strong>Gas Exhaust : ：</strong>-50~-100mmH<sub><font size=2>2</font></sub>O. 1m³/min. NW100 Flange</li> <li><strong>Cabinet Exhaust : </strong>-50mmH<sub><font size=2>2</font></sub>O. 2m³/min. NW80 Flange</li> <div> </div> <div> </div> | Air Treatment |
| 576 | FEM2000 Dual-line Particle Counting System | FEM2000 Dual-line Particle Counting System | SAM BO SCIENTIFIC CO., LTD | http://www.sambosc.com | 1. Outline FEM2000 Dual-line Particle Counting System is a movable online system measuring filtration efficiency. As a movable continuous sampling device. the system can check the condition of filter papers by moving to each filter paper. and monitor the size and number of particles in sedimented and filtered waters in real time. 2. Introduction 3. Characteristics - Monitor the condition of filter papers according to head changes such as back washing by monitoring the head of sedimented water in real time - Monitor the distribution and number of particles in filter papers according to the head of a sedimentation basin - Monitor an early leaking condition after back washing - Equipped with a ventilator. it is not affected by changes according to a pump or air injection - Minimize errors caused by contamination as the sample water-supply pipe and whole process are automatically washed. - Auto-clean the sensors periodically - Auto-clean the pumps - Equipped with a reference value measuring device which can monitor the operation condition of the counter periodically - Monitor on-site measured data in the laboratory (optional) 4. Application - Measure filtration efficiency |
Technology & Process |
| 577 | Fermented Chip–based Wastewater Treatment System | Fermented Chip | ONELINE TECH Co., Ltd. | http://www.onelinetech.com | 1. Outline • Fermented Chip–based Wastewater Treatment System - This system. which consists of a septic tank. a flow control tank. and a fermentation chip tank. treats sewage and wastewater by using the numerous microbes living in the pores of fermented chip media. • Septic Tank - It removes the sediments of floating debris contained in night soil and living wastewater as the septic tank is designed to be multistage based on the concentration of the inflowing sewage. It is a reactor tank in which the denitrifying action of sludge delivered from the final settling tank occurs and organic matters are removed by various microbes. • Flow Control Tank - It is a reaction tank for flow control to keep a consistent load of fermentation chips and for the second purification of the sewage delivered from the septic tank. • Fermentation Chip Tank - Sewage and wastewater are treated through fermentation. decomposition. digestion. and disappearance process with the function of numerous microbes living in the small pores of the fermentation chip media. 2. Introduction 14Biz-42.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-42.JPG'>3. Character • Highly treated water quality • Maintains the high quality of water because it is designed to flexibly respond against the impulse load caused by the change of flow rate of the influent • Noncorrosive and semi-permanent because it does not have any iron machinery • Requires only a small area for its installation • Does not create any noise during its operation • Low power costs for operation • No extra chemicals • No maintenance costs • Can be operated even without the help of a professional technician • Can be installed above or under the ground 4. Application • Sewage treatment • Water treatment system • Water reuse facilities |
Equipment |
| 578 | Fermented Micro-organisms l | KITOSBAKTER 2070 | Hyokwang E&C Co., Ltd | 1. Outline - The product is designed to supplement mineral nutrients easily not found in contemporary fertilizers. to provide microbes to decompose fertilizerd. to activate fermented micro-organisms and to produce better quality of fertilizers. 2. Introduction 3. Character - Supplement about 70 types of minerals. - Provide microbes designed to decompose antidotes and fertilizers. - Stimulate activity of fermented micro-organism. - Increase nitrogen and phosphorus in fertilizers - Reduce sodium. - Reduce a fermentation period. - Reduce odor. 4. Application - Livestock excretion treatment and resource (recycling) centers - Pigpens and cowshed (livestock) excrement treatment places like - Fertilizer production factories. |
Instrument & Chemicals | |
| 579 | Fermenting Chip Processing System | Oneline Tech Co., Ltd. | http://www.onelinetech.com | 1. Outline The fermenting chip that this company developed through long research in considering harmony of human beings. water and nature was made of acicular trees. such as Japanese redwood and pine tree. with a special method and physical process as a wooden core product. This fermenting chip starts to be putrefied. solid-liquid separation performed at the same time and BOD source contained in sewage is absorbed in case this chip discharges foul water and sewage of a regular amount per unit hour into a filled advance processing tub. For SS or BOD source that solid-liquid separation is done. a fermenting condition with 63% moisture is created and performed in harmony. Scores. thousands and ten millions of microbes begin to their activities in the fermenting chips and all the attached are degraded perfectly as nutrients. Like this. in case foul water and sewage are discharged in an advance processing tub. they pass through the chips with self-purifying function. they pass through ‘fermentation > degradation > digestion > extinction’. and foul water and sewage processes shall be completed. 2. Introduction 3. Characteristics - Quality of processed water is excellent. - As this system is resistible strongly against impact load according to flow volume of incoming water. quality of processed water is stable. - As no machine part with steel exists. no corrosion exists and this system is semi permanent. - A space is needed a little to install this system. - No noise occurs in performing this facility. - Expenditure of power consumption is very little in operating this facility. - There’s no need to use any exclusive agent. - Almost maintaining expenditure is not necessary. - Operation is feasible even though an especially technologic manager. - This system can be on the ground or underground all the same. 4. Application - Purifying sewage |
Technology & Process | |
| 580 | Feroxer filter | Feroxer filter | One line Tech Co., Ltd. | http://www.onelinetech.com/ | 1. Outline • Feroxer removes iron (Fe) and magnesium (Mn) in water by utilizing the principle of catalytic oxidation. • Because Feroxer in the underground water exists in bicarbonate form. it can help the oxygen in raw water to oxidize iron or magnesium. functioning as oxidation catalytic. As the final outcome. it filtrates and removes the oxide and functions as the removal filter. 2. Introduction 14Biz-19.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-19.JPG'>3. Character • Air oxidation methods. sodium hypochlorite oxidation methods 4. Application • Ion exchange resin: In case of purity deterioration due to the film formed on the surface of resin • Dyeing factories. filatures. and paper mills: In case of product quality degradation due to discoloration • Food factories: In case of product food quality degradation due to the damaged food • Cooling water: In case of efficiency reduction due to the scale on pipes |
Technology & Process |
| 581 | Special grade yeast fertilizer | Hanbat Fertilizer Co., Ltd | www.hanbatbr.co.kr |
1. PRODUCT DESIGN & CHARACTERISTIC
- This product decreases the acidity levels of the soil and dissolves remaining pesticides and fertilizers
- Not advisable to be mixed with pesticides
- Must be applied 8 to 10 days prior to planting if used for greenhouse plants
2. PERFORMANCE OF RANGE
- Ingredient content: Cow manure 25%. poultry manure 20%. pig manure 6%.
sawdust 25%. tree bark 15%. palm oil meal 5%. mushroom medium 3%.
microorganism product 1%
3. STRONG POINT
- Lowers plant’s susceptibility to diseases
- Promotes the healthy growth of plants
- Improves soil condition
● Please refer to the following link for the more details: http://www.hanbatbr.co.kr/html/menu2sub1.php
|
Eco-Friendly Products | |
| 582 | Aerobic Composting Technology of Food Waste by Air Injection Method | Aerobic Composting Technology of Food Waste by Air Injection Method | Jeesung livestick engineering Co., Ltd. | http://www.jeesungle.com | 1. Outline Technique that enables the removal of alien substances such as vinyl in the fermentation tank by the rotating screw and injecting air. without using pretreatment of classifying treatment equipment. and turn food waste into the aerobic compost. 2. Introduction 2-1. Technique of treating alien substances such as vinyl in the fermentation tank without any sorting equipment - The pre-treatment process can be omitted because the screw agitating food waste can eliminate waste bag or string. - Simplifying the process can reduce the investment cost for equipment. 2-2. Technique of turning food waste into aerobic compost by the screw method and injecting air: - Injecting air. which is essential in the process of aerobic compost. is provided by the ventilation equipment on the floor that can also treat leachate and by the new method of directly injecting external fresh air through the screw capable of deep layer agitation. - As the agitator itself is designed and produced simply and firmly. rarely has trouble and even if trouble. occurs the agitator can be removed and fixed while leaving the operation material inside the fermentation tank as it was. 2-3. Deodorizing by the circulation techniques inside the compost plant The moisture and odorous substances. which occurs while agitating food waste. are removed from the deposit layer by using the scrubber. This technique leads the odorous substances and moisture to the upper-layer through the derivative tunnel. and sends to the Bio-filter where the odorous contaminated substances can be treated. 2-4. Treated Amount: 10 ton/day ~ 100 ton/day 2-5. Treatment Capability <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=273_5.jpg></center> 2-6. Products quality <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=273_6.jpg></center> 2-5. Process <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=273_7.jpg></center> 3. Characteristics - Compare to the previous agitation method enables up to 1.8 m – 2.4 m deep-layer agitation. and reduce up to 75% of the land site area of it. - When trouble occurs the agitator can be removed and fixed while leaving the operating material as it was in the fermentation tank. - If the initial influx concentration of sulfur hydrogen is 53 ~70ppm. use the Fly-Ash Ceramic as the deodorizer. and achieve average of more than 95% of elimination rate regardless of the time used for treatment. - Achieves an average of 90% deodorizing efficiency when using charcoal as an absorbent. - Reduced the electric power expense of up to 20-40% 4. Applied field Turning food waste into the compost | Technology & Process |
| 583 | Fiber Discfilter | Fiber Discfilter | YUCHEON ENVIRO CO., LTD | http://www.yucheon.co.kr/ | 1. Outline As a gravity-type discfilter using a fiber media which is available for depth filtration. this Fiber Discfilter treats BOD. COD. SS and T-P. effluent water from purification plants. and nonpoint pollution sources (CSO). 2. Introduction 3. Characteristics - Secure clean treated water through stable removal of BOD. COD. SS. T-P and other pollution sources by in-depth filtration - Provide customized designs according to flow amount and water pollution load as it has different models with various size and type of fiber media and various diameter and number of discs - Easy to change and check fiber media - Stable and continuous operation by cleaning fiber media completely with a specialized washing device and an auto-cleaning nozzle - Need only a small amount of land for installation due to compact design. need no backup facility thanks to a continuous filtration process - Loss of head is very small as a gravity-type (non-pressure flow) filtration facility - Very small discharge amount of washing water (1~3%) - A largest amount of filtration facility supply in Korea. proved reliability with long operation experience 4. Application - Tertiary treatment of BOD. SS. and T-P in discharged sewage water for total maximum daily load and TMS - Tertiary treatment for the removal of SS in sewage. wastewater. and reclaimed wastewater and reusing system - Removal of algae and SS in raw water (purification plant). lakes. and fish farms - Filtration of industrial water. cooling water. agricultural water. circulating water for the cooling of power plants and steel plants. and other agricultural and industrial waters - Pre-treatment for the advanced treatment (activated carbon. ion tower. ozone. UV) and membrane separation (R/O. N/F) - Filtration of discharged water from purification plant - Treatment of nonpoint pollution sources (CSO) (combined sewer overflows when raining) - Treatment of T-P by combined process with chemical injection equipment at the back of the final sedimentation tank |
Equipment |
| 584 | Fiber Disk Filter | Yucheon Enviro Co., Ltd. | http://www.yucheon.co.kr/ | 1. Outline - Fiber disk filter for advanced treatment of T-P through coagulation filtration by fiber media 2. Introduction 3. Characteristics There is no need of separate raw water inflow pump. as it uses gravity filtration by little water level difference (250mm). and it requires very small installation area as of comparatively high filtration speed and its compact structure. Separate spare system is not necessary as of continuous filtration process. Backwash is efficient as of high pressure spray washing method. periodic acid wash is not necessary. filtered water quality is stable and superior as of the deep filtration. It is easy to design according to the flow rate. water quality. and contamination load. as there are various specifications of fiber filtering media. disk diameter. and various models against flow rate. The cost is affordable as locally developed fiber filtering media has been used and its durability is superior. Fiber filtering media can be replaced easily without suspension of operation and without drainage of water in the filtering tank. and it is very easy for operation and maintenance. Complete washing of contaminated alien substances deep inside the fiber filtration layers during operation by additional constitution of sludge drawing pump. and it is easy to cope with the inflow shock load. Deep filtration by 5~18㎛ diameter size fiber filtering media can provide high treatment efficiency even in the operation without chemical injection. very high treatment efficiency in the operation with chemical injection. and the treatment water amount is uniform and stable in the mid/long term operations. 4. Application - 3rd treatment of discharged sewage/waste water. filtration treatment of water reclamation and reusing water - Advanced treatment (activated carbon. ion tower. ozone. UV) and pretreatment of membrane separation (R/O. N/F) - Filtration of algae. SS. and other contamination substances in the sea. water intake plant. fish farm. and pond - Filtration of cooling/circulation water in power plant. steel works. and other farming/industrial water - 3rd treatment of COD. BOD. SS. and T-P by chemical injected filtering operation (against the total pollution regulations. TMS. and total phosphorous regulations) - Filtration of CSO in the combined sewers in case of rain - Filtration of discharging water from water purification plant |
Equipment | |
| 585 | Fiber Filter | Fiber Filter | Daesin Entech Co, Ltd. | http://www.ds-entech.co.kr | 1. Outline - The fiber filter uses light fiber filter media that removes particles and the treated water flows out from the bottom. It is a floating filter. made with polypropylene in 5mmX3mm thick. providing outstanding filtration ability. Its strong agitator rotation power keeps high filtration performance in take during backwashing. 2. Introduction 3. Character - Possible to treat at a high speed (Filtering speed is about 4-10 times faster than existing sand filters.)) - Fiber media uses a low lift pump because of less pressure losses. - Possible to clean the media thanks to a water-churing method. - Less cleaning water for media cleaning ( less water than that of sand filters.) - Simple structure and easy to maintain 4. Application - Water discharge of sewage plant - Industrial water - Groundwater - Fish farm - Pool |
Equipment |
| 586 | Fiber glass pleated filter | PORLAS | ABSFIL Ltd. | http://www.absfil.com | 1. Outline - PORLAS cartridges are pleated with the best grade of fiber glass. These are designed to remove harmful liquid and solid substances. PORLAS is applied to a sterilized environment and is used as a vent filter. 2. Introduction 3. Character - Excellent chemical compatibility. - Remarkable efficiency. - Outstanding capacity for removing dust. - Long service time. - High flow rate. 4. Application - Chemical industry - Biological pharmacy. Biochemical industry |
Equipment |
| 587 | Fibrous Depth Filters | DISK FILTER | ANT Co., Ltd. | http://www.antcorp.kr | 1. Outline - Disk type of fibrous media filter is used in third processing of waste water/sewage by installing it in back side of activated sludge system. nitrogen/phosphorous removing process. Also. it is very effective in removing organic matter. phosphorous. chromaticity. and precipitates. Filter media can be variously arranged from column 1 to 12. and the exterior can be made from concrete of steel 2. Introduction 3. Characteristics - Operated by head low pressure head type based on gravity. and is designed to automatic backwash according to water level difference - Filtering is continued even during backwash so separate filter is unnecessary. and 24 hour continuous operation is possible - Backwash quantity compared to inflow water is a very small rate of 1-3% - Countermeasure ability against severe change of hydraulic and solid load is excellent - Since it has 75-85% site reduction effect compared to existing filter. saves field foundational construction cost - Since structure itself is simple and operated automatically. installation is easy and operation convenient - Since fabric filter receives pressure only during cleansing. abrasion is very small - Since filtering bleb’s life cycle is long. maintenance/management cost is low 4. Application - Filtering in waste water/sewage treatment plants water treatment |
Equipment |
| 588 | Filled Pipe Flowmeter | Xonic 100 | SURO Tech Co., Ltd. | http://www.surotech.com/ | 1. Outline - This Filled Pipe Flowmeter is capable of measuring flows accurately and rapidly under any condition. Flows are measures by attaching the instrument to the outer wall of the pipe. 2. Introduction 3. Character - Korea’s first clamp-on type flowmeter. - Measurable Velocity: 0.01 ~ 12 m/s. - Capable of measuring all kinds of flows including sewage with 30% or less of solid matters. - Possible to install and repair without cutting the pipe. - Oscilloscope function. - DSP function (Cross Correlation). - Fine Time Measuring (Patent No.: 10-0532041). - Alarm for constant flow. reverse flow and empty pipes. - Inputting function (4-20mADC from the outside)(option). - Self-diagnosis function. - AR Mode Ultrasonic beam. - Key Lock for data protection. - Large Color LCD - Back Light which is able to check in the dark areas. - Up to store 500.000 data. 4. Application - Flowmeter |
Equipment |
| 589 | Super Filter | Super Filter | KAHA ENG. Co, Ltd. | http://www.super-filter.co.kr | 1. Outline The Super-filter is a filter with considerably improved backwash efficiency. thanks to the layering and twisting of thousands of chemical textile single strand threads. These are used in a straightforward manner for the filtering process. and then are untwisted for the backwash flow. 2. Introduction The shortcomings of existing filters (including sand filters and cartridge filters) were expensive. as time losses due to clogged filters and the high costs of filter exchange and maintenance quickly added up. Especially. as they lacked an efficient backwash system to help extend the filter's durability. they led to financial drain due to a necessarily frequent exchange of machinery. Under the judgement that we can prevent such economic loss only by maximizing backwash efficiency for minimizing the greatest shortcoming of filters. the company decided to use liquid textile as a filter. We envisaged a filter using chemical textile single strand threads that are neither knitted nor woven. and so finally the Super-Filter was created. |
Equipment |
| 590 | Disk Filter | Disk Filter | Han Sung Co., Ltd. | http://www.hansungenv.co.kr | 1. Outline - Fiber Recovery and thickening for pulp and paper mill - Substitution for save all of wire part in paper machine 2. Introduction - Integrated wastewater treatment for paper mill - Integrated wastewater treatment for leather industry including removal of buffing dust - Removal of lint (80~90%). recovery of NaOH and prevention of blockage for heat-exchanger (textile processes like bleaching and dyeing) Table 1. Technical data <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2004000020-1.jpg></center> 3. Characteristics - Can be installed in narrow space due to compact design - Can select specific wire mesh size among various stainless steel wire mesh (44~350 um) - Low power consumption and automatic cleaning function - Low speed of disk rotation - Speed can be adjusted by controlling gearbox of motor - Clean discharge - Space saving by 20~90%. compared to others - Large area of application by varying the pore size - Low operating cost - Low abrasion - High flexibility and fast response to the change in inlet condition and stability in outlet concentration of solids - No need for additional cleaning and concentration-controlling unit 4. Application - Recovery of cellulose. acetate fines (textile industry) - Recovery of raw material from steam peeler (fruits cannery. juice and tomato ketchup) - Recovery of PE fines and asbestos fiber (petrochemical industry) | Equipment |
| 591 | ACF Filter | Youngsung Filter | Young Sung Corporation | http://www.hitank.co.kr | 1. Outline Youngsung filter is a high-performance filter which is made of ACF (Activated Carbon Fiber) complementing activated carbon filter used at existing water-purifiers. The composite filter also has great adsorbability. 2. Introduction 2-1. Schematic drawing for product - Top and bottom caps inserted into top or bottom parts of a Youngsung filter. bound with a housing. and made of plastics such as polycarbonate. which are not harmful to humans. or rubber like silicon. - Internal core supporting a Youngsung filer. and maintaining smooth flow of purified water. with being located at the most inside of the filter; made of innocuous polypropylene and polyethylene to prevent purified water from being again contaminated by the internal core. - Internal non- woven fabric prevents the discharge of activated carbon fiber during the water purification with being inserted between the filter layer of a Youngsung filter and internal core. - Outside non-woven fabric used for preventing the outside of a Youngsung filter from being flawed or impurities from being accumulated there <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=262_4.jpg></center> 3. Characteristics - Produced by burning or activating organic fiber - Showing good micropores responsible for adsorption - High mono-distribution capacity of pore diameter (10~20 Å) - Adjustable diameters of pore ( Morecular Sieve) - Selective adsorption on absorbate like molecular sieve - High adsorption and desorption speed - Resistance of absorbate movement into and out of adsorbents minimized because of small diameters - High non-surface area (1.200~3.000 ㎡/g) - High adsorption weight per gram (iodine adsorption weight - 1.800mg/g. - Decolorization weight of methylene blue - 300mL/g) - High purity : below 0.1% of ash - Bulk density : 0.01~0.2g/cc 4. Applied field - Water purifier | Instrument & Chemicals |
| 592 | Water filter | Auto self-cleaning water filter | Energy & Environmental Technology Co. Ltd. | http://www.enetcom.co.kr | 1. Outline Auto self-cleaning water filter has successfully completed thousands of installation in the chemical. hydrocarbon. plastics. food. sugar. mining. steel. automotive. paper. pharmavertical and power industries. as well as sewage treatment and agriculture irrigation. 2. Introduce - Performance The filter remove dirt down to micron size. of any specific gravity. even lighter than water. Dirt from sources such as cooling towers. rivers. lakes. ponds. reservoirs etc.. can include sand. gravel. algae. microbiological growth. etc - Principle of Operation . Dirty water enters the upper chamber of filter. where it is pre-filtered through a coarse screen. The water then flows to the lower inner comparison of the filter. where it is filtered through a stainless steel fine screen. . The dirt particles gradually build up a filter cake on the inside of the fine screen(such filters out even finer particles) creating a pressure differential. . At a pressure level of approximately 7 psi. the filter activates a self cleaning rinse cycle by opening a rinse valve to a drain. . Since the drain is at atmospheric pressure. the pressure inside the hydraulic motor chamber drops. as does the pressure inside the dirt collector and at the nozzle openings. . The pressure drop in the collector nozzle creates backflush stream which sucks dirt from the screen back into the nozzle openings; a similar principal to that of a vacuum cleaner. . Water containing dirt washed off the screen flows through the dirt collector and hydraulic motor to drain via the rinse valve. . The rinse water being ejected out of two holes in the hydraulic motor impels a rotary movement of the dirt collector; a similar principal to that of a garden sprinkler. The rotating nozzles sweep the dirt off the entire screen surface. . The fully automatic rinse cycle takes seconds and does not interrupt the water flow. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000076_1.jpg></center> 3. Application - Wherever dirty water is a problem: cooling water. process water. reclaim water. effluent water. intake water. wastewater. wash water and potable water | Instrument & Chemicals |
| 593 | Filter | Joypur filter | BlueWater Co., Ltd. | http://www.pthkorea.com | 1. Outline - With an increasing amelioration in water outflow. Joypur Filter. made of specially mixed raw materials. is an outer chock resistant and semi-permanent corrosion preventive filter. - Assembly structure. which consists of the same nuts. enhances relatively a remarkable strength and the elasticity against the hydraulic pressure and frozen-to-burst effect considering the inner Pressure outer temperature change. 2. Introduction Table 1. Technical Specification Fig 1. Components |
Instrument & Chemicals |
| 594 | Hazardous gas & dust control apparatus | Bag Filter | SEJIN ENVIRONMENTAL CO., LTD. | http://www.sejinenv.com | 1. Outline Bag filter is a typical dust collector which eliminates dust and particulates generated by each process. It can collect and reuse the dust. and can also filter dust gas of high temperature. 2. Introduction BAG FILTER is a dust collector with the best efficiency and performance among all sorts of dust collectors. It does not require a separate waste water disposal plant as it is based on the dry-type dust collection which neutralizes dust. HF. HCl. SOx and Dioxin included in exhaust gas with Ca(OH)2 and active carbon. 3. Characteristics - High collection efficiency for particulates - Able to collect many different types of dust - Particulates treatment into many different volumes - Suitable for the treatment of high density dust - Convenient maintenance and fixing - Collected dust and particulates can be reuse as raw materials. - Dust gas of high temperature can be treated. according to its material 4. Application - Casting. cement. paper manufacturing. furniture. lumber industry and forage factory. - Prevention system for a smelting furnace. a reverberatory furnace and a boiler - Exhaust gas treatment system for all sorts of combustion apparatus - Air pollution prevention system for city waste (industrial waste) incinerator - Treatment for waste gas from the burning of waste containing dioxin | Technology & Process |
| 595 | LAKOS SEPARATOR | LAKOS SEPARATOR | Kimsung WATER TECHNOLOGIES INC. | http://www.kimsung-lakos.com | 1. Outline LAKOS Separator uses centrifugal force to eliminate solids which cause numerous problems in liquid. The LAKOS separator is an international patented product that can eliminate particles with centrifugal separation - more than 98% of particles with the size of 50mm~200Mesh (74Micron) and density of more than 2.6. and up to 75% of micro particles with the density of 20~50Micron. The separator prolongs the life span of the operated liquid and protects water treatment equipment from contamination and abrasion. The separator helps the system to be maintained in its high efficiency. saves operating cost. shortens the maintenance period and prevents the loss of liquid and solids. 2. Introduction Liquid/solids are put into the unit and it forms a spiral circulating flow. The interior Swirlex tangential slots accelerate the flow of fluid in order to maximize separation of solids and reduce pressure loss. The solid particles are pushed away by centrifugal separation as they are heavier than the liquid. The solid particles eventually fall into the collecting chamber where there is no flow movement. The liquid separated from the solids is lifted upwards and comes out of the separator. forming a spinal swirl. 3. Characteristics - No separating components needed - No need for screen. cartridge. cones. filter. etc. which require cleaning or replacing. - No need for back wash - No need for maintenance on routine basis or a shutdown of operations - No need for preliminary equipment - Low pressure loss - Stable operation - Simple automation - Semi-permanent - Possible to install in a small area - Extremely low liquid loss - Easy to handle as the solids are effectively condensed. 4. Application - Automobile industry. machinery industry - Oil (cooking oil) industry. steel industry - Chemical product industry. oil & gas industry - Car-washing facility. water supply and drainage/reusing treatment |
Equipment |
| 596 | Anti-clogging Biofilter System | Biofilter System | Biosaint Co. Ltd. | http://www.biosaint.com | 1. Outline Biofiltration is a brand new environmentally-friendly technology that eliminates the VOCs and harmful stench causing matters present in the polluted gas exhausted from environmental pollution treatment plants and many industrial plants by decomposing them into harmless and odorless CO2. water. microorganisms or inorganic matters (sulphuric or nitric acid) through the biological metabolism of microorganisms at room temperature and pressure. 2. Introduction Biofiltration uses microorganisms fixed to a porous filter medium to beak down pollutants present in an air stream such as odorous or VOCs gases. The contaminants are sorbed from a gas to an aqueous phase where microbial attack occurs. and are converted to carbon oxide. water vapor. and biomass. 3. Characteristics - Excellent efficiency in the odor and VOC elimination and its treatment capacity - Its simple structure and high ability for coping with the changes in load amount - Ultralight biofilter system - Excellent biofilter system and its media ability which do not require a separate humidifier. - Provide various microorganisms according to the properties of odor and VOCs - Powerful Biofilter for a large capacity - Low pressure loss. easy maintenance - Small system/ small area required for its installation 4. Application -Adhesive production -Animal husbandry -chemical manufacturing -Chemical storage -Composting -Food processing -Fragrance Industry -Furniture manufacturing -Iron foundries -Landfill gas extraction -Petrochemical manufacturing -Petroleum industry -Pulp and paper -Sewage treatment. Soil-vapor extraction. etc.. |
Technology & Process |
| 597 | Filter | General Type AP DWS-750 | 3M Korea, Ltd. | http://www.3m.co.kr | 1. Outline - 3M Water Purifier. 2. Introduction - Valid Purification Amount: 5.678L. - Replacement Time: approximately one year. - Major Features: Korea Water Mark. USA NSF 42. 53 Certification - Built-in Auto Shut Off - Removal of heave metals and passage of mineral 3. Character - Density gradient type filters has a structure in which the space between fibers gradually narrows inwardly. - Large foreign substances can be collected from the outside and small foreign substances can be collected from the inside. - High quality activated carbon – removal of membrane and odor caused by chlorine. - Activated carbon oxygen from trees. sphagnum moss. nut shells and oil captures organisms like chlorine. - Resin which has a function of heavy metal removal is mixed into a compressed carbon filter and removes volatile organic compounds. lead and mercury. 4. Application - Single jet dry water meter. |
Equipment |
| 598 | Filter dust collector | Filter dust collector | KOCAT Inc. | http://www.kocat.com | 1. Outline - The air containing the dust is flowed in the housing by pumping or drawing at the inlet of the bottom. The dust is attached at the surface of the non-woven fabrics and the filtered air passes through the inside of non-woven fabrics and it is discharged through the upper exit. - The dust attached at the surface of filtering cloth is cleaned continuously by the cleaning device of pulse jet type. gathered at the bottom hopper and discharged. - The cleaning device absorbs the highly pressured air (7kg/cm2) by the blow tube. When the dust comes into the filtering cloth. it washes the dust by the vibration of pulsatory spray and the flowing backward air. 2. Introduction 3. Characteristics - High dust collection efficiency more than 99%. - Suitable facility for the treatment of wide range of wind amount. - Treatment of various kinds of dust and high concentration. - Wide range of model selection. - Easy maintenance and repair. 4. Application - Emission gas of incinerating facility - Emission gas of power generation facility |
Equipment |
| 599 | Filter Kan Dust Collector | Filter Kan Dust Collector | Greencon Technology Co., Ltd. | http://www.greencon.co.kr/ | 1. Outline - This Filter Kan Dust Collector which adopts a down-flow system is a compact product that requires less installation place and maximizes a dust collection effect and its filter is a plated type and can be reused after water washing. Especially this Collector has a high dust collection efficiency as it can collect 99.95% of dust with a size of 0.2um~2um and it requires 50% less installation space and one-fifth of a volume compared to existing dust collectors. 2. Introduction 3. Characteristics - Maximization of a dust collection efficiency through the use of a pleated filter. - Reduction of air pressure loss. - Astonishing collection and removal capability through descending air currents. - Reuse of a pleated filter after washing it with air or water. - Maximum shortening of a delivery period by adopting a modular type. - Dust collectors with an over 4.500CMM capacity are available. 4. Application - Dust Collector |
Equipment |
| 600 | Filter media | BC PLUS | Cnctech Co., Ltd. | http://www.cnctech.co.kr | Microorganism contact filter media 1.Outline BOD. COD. and SS components that act as pollutant materials in the wastewater are decomposed by high concentration of microorganisms and protozoa that are attached on the surface of the microorganism contact filter that are disposed in the aerobic tank. 2. Introduction BC PULS is made of nylon yarn BCF to maximize the surface area and the amount of microorganism retained thereon. thereby achieving advanced purified efficiency for sewage and wastewater. Also. the BC PULS is formed of nylon mono-yarn to minimize the drooping of the original shape due to the microorganism attached thereon and the anaerobic process. thereby drastically suppressing the generation of sludge caused by the decomposition and desorption. 3. Characteristics 1) Rapid attachment of microorganisms. without separation from the filter - Made of nylon whose amide accelerating physical and chemical combination with microorganisms. - Microorganism attached on the interior of the section of BCF micro fiber Y type. not influenced by the flow of gas or liquid. 2) Maximum surface area in domestic products - Having more than 1.0 m2/m of surface area by use of BCF yarn of section Y. 3) Clean treatment water as the number of microorganisms separated is small - Maintenance of maximum porosity by mixing with nylon mono yarn. with rarely having the desorption of microorganism by the anaerobic process. 4) Less resistance against the flow of gas or liquid - Being of a rope shape that does not interfere the flowing of gas or liquid. thereby improving treatment efficiency and avoiding the falling of sludge by shocks. 5) Semi-permanent use - Excellent chemical resistance. acid resistance. and alkali resistance and a high degree of tension strength. 6) Economical - Higher treatment efficiency by 5 ~ 10 % than existing rope type contact filter. when the same amount is employed. 4. Application 1) Sewage - New sewage treatment facilities. existing sewage treatment plants. - Repairing in case of having a low treatment efficiency as standard activated sludge methods. long term aeration methods. or contact oxidization process using other contact filters is employed. - Bio-reactor: Installation of Bio-reactor made of BC PLUS in case of having a high efficiency at the expense of a short treatment period of time with post-process equipment to thereby minimize the loss of time and expense due to the whole repairing. - Decomposition type of sewage disposal tank. merged sewage disposal tank. advanced treatment equipment. 2) Wastewater - In case where the quality of treatment water becomes bad as the load of water flowing increases. - In case where MLSS in the aeration tank is not maintained. - In case of generating a large amount of sludge. - Denitrification system. Bio-reactor. 3) Rivers. ponds. fish farms - Removal of suspended substances. nitrogen. phosphorous. COD. and BOD in the rivers. ponds. and fish farms. 4) Deodorization Applied to biological bad smell removing systems. | Others |
반응형
'놀면서 일하기 > 창업 아이디어링 + 문서' 카테고리의 다른 글
| 환경산업 관련 제품 및 기술 목록 : 801-1000 (0) | 2023.12.25 |
|---|---|
| 환경산업 관련 제품 및 기술 목록 : 601-800 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 201-400 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 1-200 (0) | 2023.12.25 |
| (주)숲담다. (0) | 2023.12.08 |
댓글