"Ohms Too Low" or "Ohms Too High"?

우연히 호기심으로 SMOK 라는 브랜드의 전자담배를 사봤는데...

참으로 고장이 많다.

처음엔 흡입구에 담배액 넣은 부분이 새서.... 스페어 흡입구로 갈았더니..

이번엔 OHMS 가 높다면서 작동이 안된다. 

================================================================

"옴이 너무 낮음" 또는 "옴이 너무 높음"?


베이핑할 때 "옴이 너무 낮음" 또는 "옴이 너무 높음" 경고가 표시될 수 있습니다.
     1. 정상적인 상황:
             코일 저항이 0.1ohm 미만이거나 3.0ohm보다 큽니다.

     2. 비정상적인 상황:
         코일 저항이 합리적인데도 경고가 계속 나타나면 다음과 같은 이유 때문일 수 있습니다.

             I. 저항 감지 구성 요소가 파손되어 올바르게 읽을 수 없습니다.

            II. 제품의 구성 요소가 단락되었습니다.

           III. 나사가 꽉 조이지 않습니다.

다음 방법을 시도하여 복구할 수 있습니다.
     1. 탱크를 벗고 발사 버튼을 클릭한 다음 탱크를 다시 장착하고 "새 코일입니까?"라는 메시지가 표시되면 "n"을 클릭합니다.

     2. 모드에서 RBA 코일을 사용하는 경우 나사가 탱크에 단단히 고정되어 있는지 확인하십시오.

     3. 당신의 모드에 있는 다른 탱크나 코일로 시도하고 다른 모드에서 같은 탱크를 시도하여 제대로 작동하는지 확인하십시오.

     4. 모드 문제인 경우 업데이트가 있는 경우 업그레이드를 시도하십시오: https://www.smoktech.com/faq-list?category_id=5 



문제가 계속되면 저희에게 연락해 주십시오.

 

 

 

"Ohms Too Low" or "Ohms Too High"?

 

When you are vaping, it may give "ohms too low" or "ohms too high" warning

    1. Normal circumstance: 

            The coil resistance is less than 0.1 ohm or more than 3.0 ohm.

    2. Abnormal circumstance: 

        If the warning still pops out while coil resistance is reasonable, it may be caused by the following reasons:

            I. The resistance detection component is broken, can't read it correctly.

           II. The components of the product are short-circuited.

          III. Screws are not tight down.

You could try the following methods to recover:

    1. Please take off the tank and click the fire button, and then place that tank back on, click "n" when it asks "is it a new coil".                              

    2. Please make sure screws are tight on the tank if you use the RBA coil on your mod. 

    3. Please try with other tanks or coils on your mod, and try the same tank on the other mods to check whether they work fine.   

    4. If it is the mod issue, please try to upgrade it, if there is an update for it: https://www.smoktech.com/faq-list?category_id=5

 

If the problem still exists, please try to contact us.