728x90
반응형
남성용 노트북 백팩, 출퇴근 비즈니스 백팩, 플라스틱 방수 E-스포츠 백팩, 학생용 하드 쉘 컴퓨터 가방, 17.3 인치
https://s.click.aliexpress.com/e/_DkCojkZ
40.28US $ 60% OFF|Men Laptop Backpack 17.3''Commuting Business Backpack Plastic Waterproof E sports Backpack Students Work Hard
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
환경산업 관련 제품 및 기술 목록 : 1401-1600
| NO | 제품명 | 모델명 | 회사명 | 홈페이지 | 내용 | 카테고리 |
| 1401 | Sewage and Industrial Sludge Drying System | Sewage and Industrial Sludge Drying System | HKET.CO.,LTD. | http://www.hkmic.co.kr | 1. Outline It is a system to grow efficiency of drying sewage and industrial sludge by creating Granule mixed dehydrated sludge and wet sludge in the rotary drying system with steam as a heat source. 2. Introduction 2-1. Process <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000112_1.jpg></center> 3. Characteristics - Minimize the energy consumption by means of maximizing the heat exchange area. - No fly ash problems by means of granular type products. - No odor problem by means of sealed drying system 4. Application - Municipal & Industrial sludge incineration plant. | Equipment |
| 1402 | Sludge Dryer | Sludge Dryer | World Innotech Co., Ltd. | http://www.world-inno.com/ | 1. Outline • It is a system used to dehydrate the dewatered sludge produced during the sewage treatment process in order to decrease the sludge water content percentage to less than 10%. • This system is composed of a sludge storage tank. a sludge dry tank. a conveyer. and a discharger. 2. Introduction 14Biz-76.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-76.JPG'>3. Character • Improvement of the condensate removal efficiency - Improved the efficiency of the condensate removal by changing the internal paddle to a dipper type. - Improved the steam flow in external jackets and can thus prevent condensate congestion. • Reduction of the steam consumption - Hastens the disposal of the condensate and provides a smooth supply of the hot steam. - Improves the dehydration efficiency through an even and stable heat supply to the wet sludge that is being dewatered. • Energy conservation - Its hot steam consumption for drying sludge is less than 1.4. - Its boiler fuel consumption can be reduced because the condensate disposal temperature is 5°C higher than that of the conventional dryers. 4. Application • Water treatment device • Wastewater treatment device • Sludge treatment • Dehydration process |
Equipment |
| 1403 | Sludge Drying & High-speed Composting Facility | Sludge Drying & High-speed Composting Facility | WONJIN NB TECH LLC | http://www.wjnbtech.com | 1. Outline Sludge drying & high-speed composting facility separates sludge from water in a screen tank installed on the top by moving sludge in a sludge storage or concentration tank to pumps and agglutinate in the agglutination tank. Water is flowed into the flux adjusting tank and the sludge is fallen to the drier installed in multi-steps. Fallen sludge is dehydrated by heat and air in the drying facility. 2. Introduction 3. Characteristics - Reduce cost remarkably as it needs no dehydration process - A sludge screen drying device reduces by about 75~80^ - Remove odors as it is constructed in a closed-type - Reduce sludge treatment cost significantly 4. Application - Sludge treatment |
Equipment |
| 1404 | Sludge drying and carbonizing plant | Sludge drying and carbonizing plant | OCI-SNF Company Ltd. | http://www.eyangchem.co.kr | 1. Outline - The loaded material contacts a heat-transmitting panel in a thin film by a centrifugal force. The material with higher moisture content is prior to contact a heat-transmitting panel. Contact speed between the material and a heat transmitting panel is high due to rapid rotating of the fin. Heating and evaporation occurs at one time. 2. Introduction |
Instrument & Chemicals |
| 1405 | Sludge Heat Solubilization System | Sludge Heat Solubilization System | Mirae G&C Co., Ltd. | http://www.mrgnc.com/ | 1. Outline • The Sludge Heat Solubilization System is an equipment to solubilize solid substances contained in organic sludge by applying high temperature and pressure. Through this process. the substances become small molecules in the form of organic acids that microorganisms use easily. Then. they are turned into methane gas in an anaerobic digester or used as a carbon source for denitrification in order to maximize sludge reduction and reuse. 2. Introduction 14Biz-34.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-34.jpg'>3. Character • Substitutes fossil fuels by transforming sludge into an energy resource • Reduces disposal costs by sludge reduction (when 50% of sludge is reduced. more than KRW 100 billion can be saved annually) • Contributes to the reduction of greenhouse gas emissions by substituting fossil fuels (It can be considered for CDM projects) • Contributes to the protection of the environment and support national policy by securing low-carbon green technology • Secures convergence and complex technology for optimizing the uses of existing treatment processes • Secures domestic proprietary technology that can substitute foreign technology 4. Application • Sludge reduction • Sludge treatment • Sludge reuse |
Equipment |
| 1406 | Sludge Heat Solubilization System | Mirae Global & Cleanup Co., Ltd. | http://www.mrgnc.com/ | 1. Outline • It is a technology that solubilizes (hydrolyzes) solid matters in organic sludge using temperature and pressure (100–200°C. 15–20kgf/cm2) to make it low molecular. organic acid. which is easily used by microbes. and converts it into methane gas in a anaerobic digestion tank or reduces sludge and increases the recycling of sludge through the utilization as a carbon source in a biological denitrification process. 2. Introduction 14Biz-438_Sludge_Heat_Solubilization_System.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-438_Sludge_Heat_Solubilization_System.jpg'>3. Characteristics • Converts sludge into energy to replace petroleum. • Reduces treatment cost by reducing the sludge. (Saves up to KRW 100 billion yearly when reducing by 50%) • Contributes to greenhouse gas emission reduction by substituting petroleum energy (cdm business link) • Satisfies national policy and contributes to environmental protection by securing low carbon green technology. 4. Applications • Graywater facilities • Rainwater storage and treatment facilities • Village sewage treatment facilities and individual sewage treatment facilities |
Technology & Process | |
| 1407 | Sludge incineration technology | Sewage sludge fluid phase incineration system | KOLON Engineering and Construction Co., Ltd. | http://www.kolonconstruction.co.kr/ | 1. Outline Fluid layer application technology has been widely adapted to lamp-oil and light-oil catalytic decomposition furnaces. metallic oxide reduction furnaces. drying furnaces and molding sand reproduction furnaces. starting from industrialization in United States. Such fluid layer incinerator includes a wind box for inducing combustion air of preheated high temperature. a fluid layer part for forming fluid medium. and a free board for exhaust gas. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000310-1.jpg></center> 2. Introduction (see fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000310-2.jpg></center> 3. Characteristics (1) It completes reaction inside fluid layer. and minimizes combustion in the free board. thereby maintaining the optimum combustion condition. (2) It can inject auxiliary fuel into the fluid layer by an oil gun installed in a circumferential direction around the incinerator. and easily control an exact incinerator temperature. (3) It can transmit heat to fluid sand by high-temperature combustion air. thereby effectively forming the fluid layer. (4) It can carry out perfect combustion with excessive air of a small amount (30% or less) as an air nozzle and wind box type fluid layer are in good contact with combustion air. (5) It discharges exhaust gas of a small amount. is easy to operate and manage. and is low in construction costs. 4. Application (1) Sewage/wastewater sludge drying (2) Fluid layer incineration and exhaust gas treatment | Technology & Process |
| 1408 | Sludge incineration technology | Dehydrated sludge mixing incinerator | Halla Energy and Environment Co., Ltd. | http://www.hallasanup.com/ | 1. Outline This product is a technology to mix dehydrated sludge(water content of about 80%). which produced from a sewage treatment plant adjacent to the existing domestic waste incineration plant. with domestic wastes in a stoker type incinerator without any preprocessing system. 2. Introduction Dehydrated sludge is directly fed into the lower portion of a waste feeding chute of a refractory lining structure being in contact with an incinerator combustion chamber. and charged into the incinerator with waste matters. and then. completely sealed in a sludge storage and a supply line so as to prevent diffusion of foul smell to the outside. The dehydrated sludge is fed over a waste layer supplied to an incinerator grate. and forms additional sludge layer on domestic wastes stacked on a fire grate. thereby being burned by a method called as sandwich incineration process. Therefore. the dehydrated sludge is stacked uniformly on the waste matter layer. and thereby it is prevented that dehydrated sludge of unburned amount drops through a grate gap <center><img src=http://www.apec-vc.or.kr/attfile/market_place/img/MP200300000311.jpg></center> 3. Characteristics (1) It can treat dehydrated sludge of 10% of domestic waste incineration amount by additional simple devices without modification of the existing incinerator/boiler. (2) It can reduce heat capacity load inside the incinerator by a low heat capacity (0 i~200 kcal/kg) of dehydrated sludge. (3) It can directly incinerate without any preprocessing system. such as a drying system. (4) It is low in installation costs as having a simple structure. (5) It does not increase a pollutant production rate. as a dehydrated sludge amount is 10% of the existing incineration capacity. 4. Application (1) Refuse incineration plants (2) Sewage sludge treatment | Technology & Process |
| 1409 | Sludge Redehydration System | Sludge Redehydration System | Aquexkorea Co., Ltd | www.aquexkorea.co.kr | Product Description -original dehydrating equipments cause about 80 - 85% and new one lowers up to 75% -it is before drying and achives to economical treatment cost. -it is necessary to have for sludges since it has various percentage of water content. -it lowers percentage of water content of sludge and it is inevitable to have up to renewable energy. Product Specification / Models -available to process on real-time and cheap on energy cost to dry -dehydrate sludge with high percentage of water content with existing equipment -continuous drying system applied (solids 3% → 10% → 20% → 25~30%) -non-organic and organic sludge application Application -sewage treatment dehydrating sludge -industrial wastewater treatment dehydrating sludge -livestock wastewater. slaughter wastewater dehydrating sludge -construction and pre-construction dehyrating sludge. etc | Equipment |
| 1410 | Sludge remover | NCS-720S | DI Enviro Co., Ltd. | http://www.di-eng.co.kr | 1. Outline - It is light. but not corrosive. It has also excellent abrasion resistance to any kind of physical or chemical condition. and is used in sludge collecter for various settling basins in clean water. waste water. and sewage plants 2. Introduction 3. Characteristics - Corrosion resistance. abrasion resistance. and contractibility are excellent since parts are made on nonmetal - Operation electricity cost is low since parts are made of nonmetal - As a type of Double Life and Chain Save Rim. Sprochet has a long life cycle and it makes the force on the chain spread out - Easy to install and maintain/manage 4. Application - Sludge collector in waste water/sewage plant - Sludge collector in clean water treatment facility |
Equipment |
| 1411 | Sludge Thickening Centrifuge | MCL-200C~700C | Muhan Technical Co., Ltd. | www.muhandae.co.kr | Features : Unlike traditional decanter centrifuges. this centrifuge boasts less environmental damage. easier running with full automatic operation. more than 90% solid removal of low Thickening surplus sludges without coagulant and more removal with small coagulant. 1%-10% adjustable Thickening of discharged solid. automatic screw speed control depending on the change in sludge Thickening. and speed sensor adjusting function for continuously consistent discharge of concentrate. Applications : - Surplus or initial mixed sludges resulting from waterworks. sewage. cattle excrements and wastewater disposal facilities - Coagulant-feeding model is suitable when solid recovery is not good due to lower sludge settling and increase in treating capacity. | Equipment |
| 1412 | Rotation type inclined screen | Rotation type inclined screen | Cheonbo Engineering Co., Ltd. | http://www.cheonbo.co.kr | 1. Outline This product is directly installed on a W-watercourse. and filters solid matters through a special wire screen and discharges the filtered solid matters through a rotating brush 2. Introduction(See Fig 1. Attach-1) <Fig 1. Structure and process flow chart of rotation type screen> 3. Characteristics (1) Easy installation as it is installed on the existing watercourse (2) Large-scale treatment at a small area as the special screen is used (3) Simple structure and low price (4) It is made of excellent corrosion-resistant material(SUS 304. SUS 316) and has a semipermanent life (5) It does not generate noise due to an M.C gear connection method. and adopts a non-powered and oilless type. 4. Application (1) Seepage water treatment in aquarium type land nursery (mesh:1.2mm or less) (2) Induced water treatment in sewage purifying facilities(mesh:1.5mm) (3) General wastewater treatment in pig-raising plants and butcher houses(mesh:1.0mm) (4) Preprocessing in sewage treatment plants(emsh:10mm) (5) Other industrial wastewater treatment(mesh:0.5∼3.0mm) | Equipment |
| 1413 | Autothermal Thermophilic Aerobic Digestion | ATAD (Autothermal Thermophilic Aerobic Digestion) | TECHWIN CO., LTD | http://www.techwin.co.kr | 1. Outline Autothermal Thermophilic Aerobic Digestion oxidizes organic matters under high temperature acquired by thermophilic microbes without external heat. In result. it can primarily reduce sludge and secondarily achieve high degree of stabilization as well as disinfection of pathogenic organs. 2. Introduction Biological stabilization of sludge is based on the reduction of organic materials contained in sewage sludge Thermophilic metabolism is occurred using high temperature aerobic microbes In the process of biological oxidization of organic materials. energy is discharged in the form of heat Final products are converted into the compounds with low energy such as H2O CO2 3. Characteristics - Green Process restored to nature - Environmentally harmless stabilized compost and high quality Bio-Solid - Recommended technology which is internationally certified as US PFRP 503 Class “A” - High efficiency of Sludge reduction (VS:45% <. TS:25% <) - Reduction of Sludge treatment cost - Short reaction time (Average 7~8 days) and minimum land demands for installation - Stable operation even under the change of influent load within a certain range - No need for delicate cultivation/administration of microbes and no need for medicines or microbe products - Easy operation and compact design - No need for external heating due to its Autothermal Thermophilic energy 4. Application - Thickened sludge (cake) from urban sewage - Surplus sludge from Wastewater treatment plant - Manure from livestock farming - Other industrial organic Slurry of high density |
Technology & Process |
| 1414 | Sludge treatment system | Sheave Screen | Jungsun Environmental Machinery Co., Ltd. | http://www.jungsun.co.kr | 1.Outline A variety of sewage that goes over a dike in a head box flows perpendicularly to a wire gap on the surface of screen where the wage wires are arranged. and at this time. the solids are kept pushed to the lower portion of the screen along the inclination surface of 60 ° together with water under a size about 1/2 of the screen gap and are then dewatered. 2. Introduction (See fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000260-2.jpg></center> 3. Characteristics The suspended solids that are contained in a variety of sewage and wastewater are most effectively separated and dewatered at smallest cost. They are dewatered. while pushed downward from the top end to the bottom end. such that the product exhibits a maximum treatment performance per unit area. As the fine solids are removed out of the wastewater. the load of the equipment related thereto is decreased. and it is made of a material that is usable for a long period of time. 4. Application Fields of sewage and wastewater: paper manufacturing plants. pigpens. henhouses. cowhouses. textile. dyeing. leather plants. chemical product plants. food working plants. etc. | Equipment |
| 1415 | Small Hydro Power Generation | Energy ENC, Inc | http://www.energyenc.com | 1. Outline • Hydroelectric power generation facility with a capacity of 10.000 kW or less using the fluidity of water • Abundant domestic development potential considering its applications on agricultural reservoirs. agricultural barrages. sewage treatment plants. filtration plants. and irrigation channels of multipurpose dams aside from power production • Considered as a valuable natural resource to be developed as a clean resource 2. Introduction 14Biz-101.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-101.JPG'>3. Character • Generates environment-friendly energy with less harmful effects on the ecosystem • Has a simple structure. can be constructed in a short period and is easy to maintain • Contributes to local economic activity using local development and energy • Generates power by using existing agricultural water facilities or a water supply and sewage system • Has a density with higher energy compared to photovoltaic and wind power generations 4. Applications • Power production. agricultural reservoirs. agricultural barrages. sewage treatment plants. filtration plants. and irrigation channels of multipurpose dams |
Equipment | |
| 1416 | Smart nano dust collector | Smart nano dust collector | Clean Air Tech | www.cleanat.com | <div> </div> <div>A main dust collector of Clean Air Tech Company to remove a large amount of fume arising from down flow laser and plasma machining of acryl. steel. stainless steel. etc. and dust arising from polishing. grinding. drilling. cutting. etc.</div> <div> </div> <div> </div> | Air Treatment |
| 1417 | SMMIAR Process | Dongsung E&G Co., Ltd. | http://www.biowheel.co.kr | 1. Outline - SMMIAR (Submerged Moving Media Intermittent Aeration Reactor) Process is an advanced treatment process and operation technology. In the anaerobic tank. it removes the organic materials and induces the discharge of phosphorous. In the main reaction tank. it introduces the submerged moving media (BIOWHEEL ) and creates the oxic. micro-aerobic. and anoxic reaction simultaneously by optimization and the volume of reaction tank. Therefore. it removes nitrogen and phosphorous as well as organic materials (BOD. COD) in the same reaction tank. 2. Introduction 3. Characteristics - Making the oxic. micro-aerobic. and anoxic reaction simultaneously in the same (SMMIAR) Submerged Moving Media Intermittent Aeration Reactor. - Biological membrane is grown up by the rotating force of BioWheel similar to natural condition. - It can save the operation maintenance cost and the maintenance is easy. - Various microorganisms are living. - It is suitable to small. medium. and large size of sewage/household wastewater treatment due to compact size. - Complete post-management is available due to integrated management by DAMS (Distance Access Management System) remote monitoring and controlling system. 4. Application - Advanced treatment facility for sewage and wastewater |
Technology & Process | |
| 1418 | SmokeStack Tele-monitoring System (CleanSYS) | SmokeStack Tele-monitoring System (CleanSYS) | C.K Techpia Co., Ltd. | http://www.cktechpia.co.kr | 1. Outline - SmokeStack Tele-monitoring System (CleanSYS) refers to a system that measures concentration of pollutants emitted from the air with an automatic measuring instrument. This system connects it to a main computer in the control center online and monitors emissions of pollutants around the clock. 2. Introduction 3. Characteristics - Reduce air pollution and prevent pollution accidents by managing the environment in real time. - Change to an autonomic precautionary system from the post management system centering on regulation. - Lay the groundwork for total amount regulation of air pollutants and discharge management system by making good use of scientific policy materials. - Use as an administrative material to understand the status of discharging pollutants and calculate emission charges. 4. Application - Automatic concentration measuring of pollutants discharged from the air |
Technology & Process |
| 1419 | SNR process | Sung Il En-Tech Co., Ltd. | http://www.sungilet.co.kr | 1. Outline - The inflow water passes through the aerobic tank (reed tank) supplied by the air natural ventilating type and anaerobic/anoxic tank (wetland tank) successively. It is an eco-friendly and advanced treatment technology to remove organic matters. nitrogen and phosphorous simultaneously with microorganisms living in each tank (sand. gravel. reed root and water plant root). 2. Feature - Strong to the change of flux and water quality. - Securing the emission standard in the change of flux (maximum 150%) and water quality (maximum BOD change 230%). - No sludge emission. - There in not sludge emission because the speed of proliferation and decomposition of organic matters and microorganisms are equilibrium. - No maintenance cost. - By the powerless and unmanned operation. it is not needed the maintenance cost such as electricity cost. machinery cost. chemicals cost and labors cost. - Easy operation management. - Specialized expert is not needed because it does not use the machinery. electricity and chemicals. - Cheap installation cost. - The installation cost is cheap compared to the method using blower. pump and mixer. - Semi-permanent life. - It does not use the blower. pump and mixer. It is a semi-permanent life by using non-organic matters such as sand and gravel. - Strong to the change of temperature in winter. - It is a little influenced by the temperature difference because it buried underground. - Reed of aerobic tank and water plant of anaerobic/anoxic tank keep it warm. - Excellent removal efficiency of nutrients (nitrogen and phosphorous). - Excellent denitrifying effect irrespective of the additional carbon sources. - Excellent phosphorous removal by aggregate. - High performance and reliability. - Discharged water quality of is recyclable as the graywater. - The additional sterilizing facility is not needed. - No noise. 3. Introduction 4. Application - Sewage treatment plant - Household wastewater treatment facility - Biological wetland for water purification - Purification facility for polluted river - Treatment facility for non-point pollution sources - Livestock wastewater treatment facility - Wastewater treatment facility |
Technology & Process | |
| 1420 | UV-Fluorescent SO2 Analyzer | UV-Fluorescent SO2 Analyzer | Dongan Information Industry Co., Ltd. | http://www.dong-an.co.kr | 1. Outline The measurement of sulfur dioxide (SO2) is embodied with a UV-fluorescent method where if ultraviolet rays are drifted to sulfur dioxide. the sulfur dioxide is changed to excited SO2. Then. the excited SO2 is returned to a stable state. emitting light there from. The strength of the light at that time is selectively passed through an optical filter and detected by a photomultiplier tube (PM tube). 2. Introduction(See table 1) 3. Characteristics(See table 2.3) 4. Application Measurement and analysis of sulfur dioxide in the air | Equipment |
| 1421 | Business of conserving soil environment | Soil environment | Dongmyeong Enterprise | http://www.dm-ent.co.kr | 1. Outline Restoration of contaminated soil using microorganisms treat contaminated soil biologically without incinerating the soil contaminated with oil or bringing soil from other places. 2. Introduction Biological decomposition processes of contaminated soil using microorganisms 3. Characteristics 1) Restoration using microorganisms allow in-situ treatment. Thus wide contaminated areas can be treated economically and effectively. 2) The soil restoration period can be minimized. 3) Biological reaction by microorganisms is continuous and accelerated. Thus. when this method is used repeatedly. the treatment speed is increased and the secondary contamination can be prevented. 4) Since restoration can occur as the underground water flows. there is the effect of additional restoration. 4. Application Oil-contaminated soil | Technology & Process |
| 1422 | Soil improvement firming agent | OHK Co., Ltd. | http://www.ohk.co.kr/ | 1. Outline - Earth and sand are necessary construction materials for construction work. landfill. denunciation. and building. Firming agent for techno soil and echo soil is applied to traditional method (self-propelled modifier). which modifies sludge and weak soil from construction fields. This technology is one of the cleaner production technology and it reduces environmental load and reuse waste resources. 2. Introduction 3. Characteristics - Safe firming agent. which Hexavalent Chromium satisfies soil environment standard - Use recycled materials (PS coal) and contributes to circulatory society - Grains size of firming agent is thin and high efficiency on agitation that secondary mixing is not needed - Quick intensity revealed with absorption effect by fine porous structure (physical modification effect) - Safe working environment because it produces less firming heat. compared to traditional limed-based firming agent. - Can be used and dig again - Low-priced lime-based firming agent 4. Application - Soil improvement firming agent |
Instrument & Chemicals | |
| 1423 | Soil Washing | Soil Washing | SHINGANG HI-TECH CO., LTD | http://www.sgenv.kr/ | 1. Outline Soil Washing is a treatment technique which separates harmful organic pollution matters or heavy metals from soil particles by weakening surface tension of harmful pollution matters combined with soil particles or changing heavy metals to liquid using soil washing agents. 2. Introduction 3. Characteristics - Treat after reducing the volume by separating fine soil. as pollution matters are widely distributed in soil of small particles. - Pollution matters not chemically combined with soil particles can be easily separated from soil by a physical method. - Can reduce sludge by carrying out the treatment of sludge with highly-concentrated pollution matters while doing soil washing. 4. Application - Soil remediation |
Technology & Process |
| 1424 | Solar Battery | Solar Battery | Il Gwang Solar Energy Co., Ltd | http://www.igsek.com/ | 1. Outline - The solar battery is designed to track sunlights by setting the angle in between 0 and 45 degrees and adjusting the angle according to changes in solar altitude following seasonal changes so that insolation can reach a maximum degree. 2. Introduction Design standard: Basic wind speed 25∼45m/s(by area). maximum wind speed 50∼65m/s. Surface treatment: Hot dip galvanized. Tracking method : GPS program method. Power motor : DC 24V. actuator. Decelerating speed: 488:1. Thrust : 10.000N. Stroke : 885mm. Gear method: Revolving bearing. Communication method: Power line communication. 3. Character - Shortened manufacturing period due to product standardization. - Maximized back-tracking development efficiency. - Central control when wind speed automatically is converted into 20m/s in a horizontal way and when alert is raised against typhoons. -Web-monitoring system. -Use of corrosion-proof hop dip galvanizing and hot dip zinc galvanized bolts. 4. Application - Collection of solar heat. |
Equipment |
| 1425 | Solar cell module | PVL-Series | Airtec System Co., Ltd. | http://new.airtecsys.com | 1. Outline - Contrary to existing crystalline substance. it is a second generation type being able to be simply attached to roof. Since electricity can be generated wherever sunlight comes in. it is an ideal alternative energy source that replaces existing fossil fuel 2. Introduction 3. Characteristics - It is durable because it is not glass product - With excellent durability. quality is guaranteed for 20years - It can be applied to any type of building because it is flexible - Compared to same capacity crystalline structure. it generates the maximum 20% more electricity - It (below 3.5kg/m2) is lighter than crystalline structure as much 1/6~1/8 - On a cloudy day. 40% more electricity is generated compared to crystalline structure - At a high temperature of summer. output is lower about 4% - By peeling off the tape. it can be simply installed 4. Application - PV generator cell module |
Equipment |
| 1426 | Solar Cell Module | Solar Cell Module | Solar Fusion Co., Ltd. | http://www.solar-f.kr/ | 1. Outline - The Polyurethane Solar Cell Module developed by Solar Fusion Co.. Ltd. goes through a process of transparent polyurethane. solar cell. opaque polyurethane and Al-Frame. uses independent power supply in a place where there is no power supply provided by Korea Electric Power Corporation and avoids inconvenience of installation as this Module is equipped in a vehicle. 2. Introduction 3. Characteristics - This Module is a high current and high voltage product and can be ideally used for charging notebooks and cell phones. LED lighting and other necessary devices that need power supply. - This Module is one-third lighter than existing products as it is a lightweight product by using polyurethane which can replace glass. - Any customized size is available. - This module is a high strength product so it is not easily breakable due to its elasticity. 4. Application - Solar Cell |
Equipment |
| 1427 | Solar Heat Collector | SEIDO1-16 | Hitenergy Co., Ltd. | http://www.hitenergy.co.kr | 1. Outline - Solar energy is the environment friendly and economic alternative of conventional energy supply system. The solar beams even in the autumn or winter days can be captured by the Seido heat collector of advanced technology and used as energy. The highest quality standard criteria guarantees the product quality designed in new standard and average lifetime. 2. Introduction 3. Characteristics - Collected heat absorber can convert 92% of solar radiation to heat. and heat pipe is attached with aluminum oxygen nitride (Al-N-O) coated heat absorption tube for high thermal efficiency - Tube inside is high vacuum 10 atm (99.99999% of air has been removed) so as the pressure is less than 10 pascal. and there is no heat loss as of complete insulation. - High effectiveness to reach the high temperature of above 120℃ - It can work under the low solar beams in the cloudy weather. - It can also be operated in the maximum high pressure of 10Kg/㎠. - Heat collection tube can be added or replaced easily at low maintenance expenses. - Sufficient warm water can be supplied in the environment of ample flux of solar radiation. - High vacuum is guaranteed for 15 years by inserting of getter to keep high vacuum state continuously. - Solar heat collector complies with the German industrial standard. DIN4757. - High efficient heat collector is semi-permanent and guarantees the top efficiency and convenience by supplying high temperature water. 4. Application - Solar heat warming |
Equipment |
| 1428 | Solar Street Lamp | MJ-P40 | MIJI ENERTECH Co., Ltd | www.mijienertech.co.kr | 1. Outline - The company produces a hybrid street lamp equipped with a solar power system. 2. Introduction 3. Characteristics - Photovoltaic power generation : Application of high-efficient monocrystalline solar cells with CE and ROHS certifications. - Improve generation efficiency by using low-iron tempered glass. EVA Film and TPT back sheets. - LED LAMP : Guarantee 50000~70000 hours of long service time. - 50~70% of Energy saving effect compared to common street lamps. - Controller & Battery : Maximization of charging efficiency with a PMW charging method. - Securing of safety by adopting reversed polarity protection circuit. - Improvement of charging efficiency by battery voltage compensation depending on the temperatures. 4. Application - Solar street lamps. |
Equipment |
| 1429 | Solar Vacuum Tube Water Heater | 160SP-9TF | Hitenergy Co., Ltd. | http://www.hitenergy.co.kr | 1. Outline - Working based on the principle of heat absorption tube. All-in-one perfect supply system consisted with Seido heat pipe vacuum tube heat collector. water tank. and support set. Electric auxiliary heater has been installed in the module of tank for in case of insufficient solar heat. 2. Introduction 3. Characteristics - Convenient maintenance as of dry contact - Maximum insulation effect by 50mm thick polyurethane foam - Inside steel plate has been porcelain or enamel coated. and heat treated - Can supply warm water even without sunbeams as of built-in electric heater - Exterior cover is ABS plastic against ultra-violet rays and for semi-permanent lifetime - Reflection plate is made of aluminum plate - No leakage at all by adopting patented sealing technology on all the metal components - Water flow can be kept uniformly even extreme variation of water supplying pressure - Heater is not contacting directly to water for easy replacement - Magnesium bar anode for corrosion-proof effect 4. Application - Warm water supply by solar heat |
Equipment |
| 1430 | Solar-cell Panel Frame | DK SPACE FRAME | Dongkuk Energy Tech Co., Ltd | http://www.dkenergy.kr | 1. Outline - Panel frame to support the solar-cell panels. 2. Introduction 3. Character - Construction cost saving because of selecting materials which are suitable for the power as a space frame structure. - Short assembling time - Elaborate finishing due to minimum differences in measurement. - Lattice structure 4. Application - Solar-panel support frame |
Equipment |
| 1431 | Solar-powered Water Circulator | Solar-powered Water Circulator | GeoGreen21 | http://www.geogreen21.com | 1. Outline • It helps do the basic measures. such as prevention of nutrient salts inflow in the lake. inhabitation of production. and removal of productions to improve the quality of lake water. which is the retention area. These measures to recover water quality of minor nutrient require a lot of time and cost. The system reduces time and cost and provides eco-friendly method to improve the water quality of lake water. 2. Introduction 14Biz-126.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-126.JPG'>3. Character • It is a method to pump up oxygen deficient water in the bottom of the lake slowly to the surface of water to circulate it. • It exposes the upper water into the air to supply oxygen and sunlight and reduces floating materials and dissolved matters. • It is designed not to cause disturbance or turbulence of water. • It supplies energy required to drive a pump using solar power. • It offers low maintenance cost and high efficiency compared to dredging. covering. aeration. floatation. and other methods. 4. Application • Lake water quality improvement |
Technology & Process |
| 1432 | Solid and liquid separator | Magic chamber (Solid and liquid separator from wastewater) | Enet Co., Ltd. | http://www.enetcom.co.kr | 1.Outline Magic Chamber is a system that generates vortexes in the centrifugal field to conduct the flotation separation within a second. 2. Introduction The solid and liquid mixture is thrown to the upper portion of the Magic Chamber and is passed through a vortex finder to thus form strong shear forces that make the injected air through porous membrane micro bubbles. The micro bubbles collide with the hydrophobic fine particles and they are attached to each other. so that they move to froth phase. The froth is raised to the vortex finder and discharged in condensed state (See fig. 1). <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000277-2.jpg></center> 3. Characteristics 1) Appropriate gas and liquid ratio of 4:1 to 100:1 2) Rapid flotation separation by acceleration of centrifugal force 3) Making a ratio of Ao and Au optimized: High concentration of livestock wastewater 4) Rapid flotation separation within a second: Applicable in the fields of DAF process in which staying time is long. and where it is difficult to adopt a clarifier 4. Application 1) Effective solid and liquid separation of high concentration of livestock wastewater and sewage treatment processes 2) Applicable to oil separator 3) Gas and liquid contactor for treatment of stack gas and plant waste gas 4) Applicable to separation of fine powder in metal refining industries 5) Recycling for reduction of sludge treatment system and soil conditioner | Instrument & Chemicals |
| 1433 | Solid Corrosion Inhibitor | Solid Corrosion Inhibitor | Youngchun Chemical Co., Ltd. | http://www.chemyct.co.kr | 1. Outline • Prevents rust and scale formation in pipes; extends the life cycle of piping systems by preventing water leakage and pipe breakage caused by rust and scale 2. Introduction 14Biz-107.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-107.JPG'>3. Character • Has a strong corrosion inhibitor for beverages to completely prevent corrosion and scale formation by adding a very small amount in pipes • Polymerized at an ultrahigh temperature of over 1.200°C; colorless. tasteless. and nontoxic; harmless to humans • Has Ca. Mg. and SiO₂ (silica). which prevent scale formation and lower the hardness of water • Forms a film on the inner wall of all kinds of metal pipes. such as steel and copper pipes. to prevent corrosion • Stringent quality control by previous experiment equipment (atomic absorption photometer and others) • Contains harmless polyphosphate 4. Application • Prevention of rust and scale formation in pipes |
Equipment |
| 1434 | Solid deodorant | Solid deodorant | Joongang Chmical Co., Ltd. | http://www.joongangchem.com | 1. Outline - Solid deodorants spread a deodorized ingredient including solid materials using air flow and remove odor by neutralization caused by bonding reaction between the ingredient and odor molecule. Accordingly. it performs high effective deodorization in both closed indoor spaces and in open buildings. It also removes odor without any effect to workers. products and machineries. 2. Introduction - Shape : Compressed-block formed microcell - Size : 55 * 75* 10 - Weight : 45g ±10% - Color : White/Ivory. No pigmentation 3. Character - 90% removal of ammonia. - 84% removal of styrene. - 82% removal of trimethylamine. 4. Application - Deodorization at industrial odor occurring places such as manufacturing and wastewater treatment plant. etc. - Deodorization of leather/ fiber/chemical factories. dirty water/ sewage/night soil treatment plans. etc. - Deodorization of food processing. livestock. slaughter houses. pet care center. etc. - Deodorization of the absorber of air pollution preventing facilities. scrubbers. dust collectors and air conditioners. |
Instrument & Chemicals |
| 1435 | Solid Dewatering Centrifuge | MCL-200~700D | Muhan Technical Co., Ltd. | www.muhandae.co.kr | Features : Unlike traditional centrifuges. the solid dewatering centrifuge features less environmental damage. easier full automatic operation. more effective dewatering of low concentration surplus sludges and high concentration mixed sludges. automatic speed control responding to the change in sludge concentration. and speed sensor adjusting function for continuously consistent cake discharge Applications : Dewatering of various sludges resulting from waterworks. sewage. cattle excrements and wastewater disposal facilities | Equipment |
| 1436 | Solid fuel | RIGENKOREA Co.,Ltd. | http://www.rigenkorea.com/ | 1. Outline - Mixing combustible waste with sewage sludge by electroosmosis dehydrating (60% of moisture content) and natural drying (20%). it produces sewage sludge fuel over 5.000kcal/kg (GR M 9004. Korean Agency for Technology and Standards) 2. Introduction 3. Application ① Producing Solid fuel(GR fuel) - Fuel for high efficiency heat boiler ② Providing fuel outside at a cost or for free - Provide fuel for cement kiln - Heating fuel for vinyl house - Fuel for steam supply and power generation |
Eco-Friendly Products | |
| 1437 | Suspended Magnetic Separators | Suspended Magnetic Separators | Daebo Magnetic Co., Ltd. | http://www.daebo.com | 1. Overview With its strong magnetic force. suspended separators automatically retrieve and recycle iron lumps. plates and particles contained in input of a conveyor belt and machinery part mixed in by inadvertent mistake of workers and also recyclable metal mixed with waste matters. 2. Characteristics 1) Waste recycling 2) Production line automation 3) Other machine protection 3. Application 1) diverse raw material manufacture industry such as cement. coal. nonferrous metals. iron industry. thermo-fusional electricity generation facilities. food industry. slag. ceramics. minerals. livestock feeds. chemicals. pulp and paper industry. 2) Incineration facilities for urban industrial waste and storage center and resource recycle | Equipment |
| 1438 | Solid–Liquid Separating Machine | Solid–Liquid Separating Machine | Master Engineering Co., Ltd. | 1. Outline • This solid–liquid separating machine works as follows: wastewater is injected into a rotary drum. which rotates at a low speed. After it passes a triangle-shaped screen. solids are separated from the liquid. The solids that were separated are discharged into a sludge compressor after being dehydrated while the liquid is discharged into a filtrate outlet. 2. Introduction 14Biz-69.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-69.JPG'>3. Character • Compatible with a wide range of materials • Excellent consecutive treatment performance • Can be customized in diverse ways depending on the material properties and the capacity • Does not have problems related to corrosion because the contact parts of the machine body and the screen are made of stainless steel; allows the size of the slot to be diversely customized depending on the material properties and the capacity 4. Application • Wastewater and sewage treatment • Sludge dehydration • Livestock wastewater sludge dehydration • Food waste fluid and solids dehydration |
Eco-Friendly Products | |
| 1439 | Solid-liquid Separator | Jireh Ecotech Co., Ltd. | http://www.jireheco.co.kr | 1. Outline This solid-liquid separator is a model to respond to the existing screen method adapted separator and is suitable for the physical property that difference of each particle and specific gravity is large and concentration of solid is high. and water contented percentage of the separated solid is low. and its operation and maintenance is easy as a screen alternated centrifugal separator. compared to screen method adapted separator. 2. Introduction 3. Characteristics Any screen is not used. and consecutive separation and dehydration are feasible by centrifugal power swimmingly in this separator. Also. as dehydration is performed without centrifugal power by centrifugal power without cleansing water. water contented rate of discharged solid. This separator was developed to alternate screen adapted separator. emphasis being placed on low cost and economic efficiency. 4. Application ① This separator is suitable for screen method adapted separator. ② Merits in case this separator is applied to solid-liquid separation of livestock farming sewage - It removes excretion contained in livestock farming sewage to discharge water less than 70% in water contented percentage. - As the discharged excretion has low water contented rate and is decayed well without any water controlling agent. it’s good for composting. - As excretion is removed. the amount of reduced sewage is 15%~20%. - As concentration becomes low in the separated liquid. and water quality such as BOD and COD is low. it’s easy to make it liquid fertilizer and is suitable for purification of the sewage. |
Equipment | |
| 1440 | Soot Density Measuring Instrument | Soot Density Measuring Instrument | DASAN RND CO., LTD | http://www.dasanrnd.co.kr | 1. Outline This Soot Density Measuring Instrument is a device measuring the soot-density emitted from diesel cars. Measuring the density of exhaust gas by a light transmission method. the device removes the errors caused in the previous filtration methods and can measure the exhaust gas emitted while a car is running by real-time monitoring. 2. Introduction 3. Characteristics - Operable by being connected to a RS-232 PC or usable in standalone - Equipped with a heating device for winter - Chamber-type soot measuring device - Measuring range: 0.0 ~ 100.0 % -Light source: 563nm light emitting diode - Sensing element: photo diode - Accuracy: 0.1% - Zero point stability less than 1.0% FS @ 1 hour - Straightness: within ± 2.0 % FS - Repeatability: 1% - Response time: 1.0 ± 0.1 sec - Pre-heating time: less than 5 minutes - Power : 220 V. 60Hz 4. Application - Measure soot density |
Equipment |
| 1441 | Soot Free | Soot Free G, B, C, D, F etc. | SangMyeong ENTech | www.sootfree.co.kr | Product Description Boiler Efficiency-Up : Removal of Scale. Fouling and clinker. - Clogging problem by scale. Fouling and clinker is removed. - SOx. NOx. DUST are reduced by about 30%. Product Feature Energy Saving by combustion efficiency increase - Heat efficiency by the removal of sluge. scales. deposit. fouling. clinker. Sludge and Slag. - Increasing Rate of Fuel Consumption vs. Sludge Thickness - Prevent of low temperature corrosion and scales on air preheaters Product Specification / Models SOOT FREE- C - SOOTMASTER - SOOTFREE – G - GAS CLEANER - SOOTFREE- B - WATER MASTER - SOOTFREE – C - SOOT FREE – F Application SOOTFREE-G : CNG Engine. Gas Fired Boiler. Gas Turbine Save energy and remove white smoke and scales SOOTFREE-B : Oil Fired Boiler Save Energy and remove air pollutant and scales SOOTFREE-C : Coal Fired Boiler Improve combustion efficiency and remove clinker and dust Sox. NOx. etc. SOOTFREE-D : Diesel Engine Improve combustion efficiency and remove air pollutants such as soot. dust. CO. etc SOOTFREE-F : Solid Fuel such as Coal Waste Improve combustion efficiency and remove air pollutant SOOTMASTER : domestic Boiler. Incinerator Remove soot and oxidized substances and prevent corrosion GAS CLEANER : Small Gas Fired Boiler Save energy and with soot WATER MASTER : Boiler water treatment Prevent corrosion and remove scale | Instrument & Chemicals |
| 1442 | SOOTFREE | SOOTFREE | SangMyeong ENTech | http://www.samyangentech.com | Product Description - Boiler Efficiency-Up : Removal of Scale. Fouling and clinker. - Clogging problem by scale. Fouling and clinker is removed. - SOx. NOx. DUST are reduced by about 30%. Product Feature - Energy Saving by combustion efficiency increase - Heat efficiency by the removal of sluge. scales. deposit. fouling. clinker. Sludge and Slag. - Increasing Rate of Fuel Consumption vs. Sludge Thickness - Prevent of low temperature corrosion and scales on air preheaters Product Specification / Models - SOOT FREE- C - SOOTMASTER - SOOTFREE – G - GAS CLEANER - SOOTFREE- B - WATER MASTER - SOOTFREE – C - SOOT FREE – F Application SOOTFREE-G : CNG Engine. Gas Fired Boiler. Gas Turbine Save energy and remove white smoke and scales SOOTFREE-B : Oil Fired Boiler Save Energy and remove air pollutant and scales SOOTFREE-C : Coal Fired Boiler Improve combustion efficiency and remove clinker and dust Sox. NOx. etc. SOOTFREE-D : Diesel Engine Improve combustion efficiency and remove air pollutants such as soot. dust. CO. etc SOOTFREE-F : Solid Fuel such as Coal Waste Improve combustion efficiency and remove air pollutant SOOTMASTER : domestic Boiler. Incinerator Remove soot and oxidized substances and prevent corrosion. GAS CLEANER : Small Gas Fired Boiler Save energy and with soot WATER MASTER : Boiler water treatment Prevent corrosion and remove scale | Equipment |
| 1443 | Sorting Tank | Sorting Tank | Keosan Machinary Co., Ltd. | http://www.keosan21.co.kr | 1. Outline It is the machine which sorts garbage out in 20 tons of water tank. It treats wastes among the crushed construction wastes which rise to the surface of water. 2. Introduction - The conveyor belt installs to transfer and wash aggregates into the large water tank. - High pressured sprinkler system is built in lower part of the tank. - Aggregates are washed with the water spray system in the tank. - Suspended solids are directly removed with high pressured water spray system generating strong water flows. - The effect of washing aggregates is increasing with Hi-Head Sewage Pump. - See the Fig. 1. Table 1. Drawing. |
Equipment |
| 1444 | Sound absorbent by recycling water glass | Sound absorbent by recycling water glass | Sunmoon University | http://environment.sunmoon.ac.kr | 1. Outline - Develop lightweight and simple soundproof panel. which is easy to use and repair. with NRC (Noise Reduction Coeff) 0.7 or more of efficiency. 65% or more of porosity. and 0.8 or less of weight. - Develop products suitable for construction materials using waste resources. - Develop products which are not hazardous to humans when used or manufactured. 2. Introduction 2-1. Analyze the characteristics of sound absorbing materials obtained from waste glass in order to develop a product and to find out problems. 2-2. Test items and assessment methods |
Recyling |
| 1445 | Sound Level Recorder RS-60 | Sound Level Recorder RS-60 | Kine Industrial Co., Ltd. | http://www.e-kine.com | 1. Outline - This RS-60 Sound Level Recorder is a sound meter that can measure noises from construction sites. explosions. airplanes. railroads. road traffic and various urban environments and that features unmanned measurement without an overload as this Recorder has a wide measurement range and width (Dynamic Range 120dB). 2. Feature - Very economical as long-term use is possible due to mobile installation from a site to another site - More than 10 months’ storage of equivalent noise level (Leq) and max values - Use and management of stored data using software - Software check on whether this device functions properly. whether the battery is dead and whether an error occurs due to power supply and timeline management of measured data - To be installed anywhere as this device is waterproof - Distance extension for a measurement sensor by using extension cables (10. 20. 30. 60m and etc.) - Establishment of a light bar system and a buzzer operating system by freely setting up control dB values proper for each site 3. Introduction 4. Application Noise Measurement |
Equipment |
| 1446 | CALMINOX BUILT-IN SOUND-ABSORBING MATERIALS | SOUND-ABSORBING MATERIALS | ENVIONEER CO., LTD | http://www.envioneer.com | Multi-functional metal for sound-absorbing power materials 1. Outline The present metal for sound-absorbing power materials is a porous material made of a metallic fiber. This metal is a product in which an abrasion region of sound by a resonant phenomenon is maximized to maximize noise attenuation. 2. Introduction The present metal is a porous material made of metallic fibers such as stainless. aluminum. etc. It is manufactured by a process of extracting a fiber from a metal powder and then sintering the fiber at high temperature without a binder. Therefore. it can be said that the fiver is a product having an optimum open pore condition since porosity of a 3-D network shape is formed therein. Furthermore. the abrasion area of sound by a resonant phenomenon is maximized by controlling an inner porosity 60-90%. Therefore. there are effects that a noise attenuation effect is good and resonance of a low frequency band in designing an air layer or a rear material can be controlled. Furthermore. Nano Titania sol of 10nm or less in size is coated on the sound-absorbing metal to add an air purification function. Therefore. this multi-functional sound-absorbing materials have functions of sound absorbing. antibiosis. deodorization. control of humidity and ventilation when being used for indoor interior decoration materials. 3. Characteristics 1) Excellent sound-absorbing capability with a 3-D porosity structure 2) No danger of fire since a heat-resisting temperature is 1300℃ 3) No generation of noxious gas since it is a non-combustible material 4) Good antibiosis and deodorization functions 5) Function of controlling indoors humidity and good ventilation 6) Good electric wave-shield performance 7) Easy cutting and pleating and good constructability 8) Excellent durability. semi-permanent and no change in the exterior due to corrosion such as oxidization. etc. 9) 100% recycled. light-weight. and easy delivery and handle 10) No problem of air pollution since there is no fly due to weathering 11) Beautiful exterior and good interior effect 4. Applications Construction materials for the ceiling. wall. etc. | Equipment |
| 1447 | Soundproofing | Technology for reducing height of soundproof wall using an interfering device | Unison Co., Ltd. | http://www.unison.co.kr/ | 1. Outline This product is a technology for reducing a height of railroad sound insulation wall. which can control noises of diffraction sound and direct sound. lower a height of a sound insulation wall. and reduce noises of a sound-receiving area. 2. Introduction This technology is to obtain a sound reduction effect even in a sound-receiving area of a visible spectrum upper portion higher than the sound insulation wall by reducing the direct sound transmitted to the upper portion of the sound insulation wall through destructive interference between sound transmitted through an inner lattice structure and direct sound transmitted to the upper portion of the sound insulation wall using an interference type sound insulator mounted on the upper end of the sound insulation wall. thereby lowering a height of the sound insulation wall (see fig. 1). <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000309-2.jpg></center> 3. Characteristics (1) It can carry out frequency tuning suitable for characteristics of traffic sound source. (2) It can reduce noise of visible spectrum upper portion higher than the sound insulation wall to which direct sound is transmitted. (3) It can be installed lower to 1.5 ~ 2 m than the height of general sound insulation walls. (4) It has a performance equal to the initial performance even though being used outside for a long time. (5) It can be constructed on the upper end of a new or the existing sound insulation wall through simple subsidiary materials. (6) It can reduce construction costs to half in comparison with the time when only the typical sound insulation wall is used. (7) It is environmentally friendly as color can be selected according to a scene of the site. (8) It can be used without additional base and post reinforcing constructions even though additional construction is carried out at an installation area of the existing sound insulation wall. 4. Application (1) Reduction of road noise (2) Reduction of railroad noise | Equipment |
| 1448 | SP Odor | Senko | www.senko.co.kr | 1. Outline • SP Odor is a real-time automatic odor detector that detects odor from industrial sites or basic environmental facilities in real time and traces the source. • SP Odor is developed based on excellent gas sensor technology. It detects sulfur. amine. and VOC series gases in real time to display the concentration and complex odor (dilution rate) of these gases. 2. Introduction 14Biz-429_SP-Odor.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-429_SP-Odor.jpg'>3. Characteristics • Real-time monitoring using a high-performance sensor • Simultaneous monitoring of hydrogen sulfide. ammonia. VOC. temperature. and humidity values • Converts and displays complex odor (dilution rate) • Easy installation and maintenance • Simultaneous transmission of wind direction and wind velocity data • Waterproof and dustproof structure • Use stainless steel to prevent corrosion 4. Applications • Iron manufacture (BFG/LDG/COG) wastewater of environmental treatment facilities. such as industrial complex. steel mill. petrochemistry. oil refining. wastewater and septic tank. bio gasification. etc. |
Instrument & Chemicals | |
| 1449 | SPD Control System | Sungwoo Co., Ltd. | http://www.sww.co.kr | 1. Outline The chemical injection amount is automatically adjusted according to the variation of electric charge and raw water flow by controlling the chemical injection amount with the feedback of flow charge (electric potential difference) amount to the SPD. which is generated in the mixing process when injecting coagulant in the inlet pipeline of raw water. 2. Introduction 3. Characteristics - Chemical injection amount is adjusted immediately according to the mixing process condition. - It is possible to monitor and control the mixing and flocculation processes real-time base. - Automatic injection of chemical is available according to the flow and quality of raw water. - Operation and maintenance expenses can be reduced as the chemical consumption is decreased. 4. Application - It is used for automatic control of chemical injection amount in the processes requiring chemical condensation for water purification and sewage/waste water treatment |
Technology & Process | |
| 1450 | Special collection device | Special collection device | Daeseung Plant Co., Ltd. | http://dsplant.or.kr | 1. Outline - This is a system for the unusual demands from the companies. This is a device for the recycling of the resources- including the DO Removal Unit. Cu Recovery System. Cr Recovery System. etc.- and for the elimination of the specific ions and others of the like. 2. Introduction 3. Character - The copper collection device. The useful metal waste water that is generated in production lines shall be recycled through the processes using resins or membranes utilized in the elimination or separation of ions by analyzing the characteristics. By reducing the production cost and reusing the resources. the supply and demand of the utilities and the raw materials are made even smoother. Not only that. by absolutely reducing the amounts of the waste water and the waste. the environment-friendly process operation is possible. - Chrome collection device The maximization of the cost reduction and the improvement of the productivity through reuse. after collecting the chrome contained in the chrome waste water as chromic acid or collecting the waste water as pure water. 4. Application - Chrome copper collection device. |
Equipment |
| 1451 | Spin Kiln Disc Filter | SPIN KILN | Seshinclean Co., Ltd. | http://www.seshinclean.co.kr | 1. Outline - Remove underwater algae flowing in from lakes and streams - The product is based on a simple concept with a series of grooved discs stacked in several layers and compressed in appropriate pressure to trap floating substances when water flows through these tiny grooves. It is consisted of simple pipes and electricity structure and does not need any special maintenance as the product will automatically operate backwash process when trapped floating substances are piled up. 2. Introduction 3. Characteristics - Easy and simple automatic operating system. solid structure - No tools or chemical substances needed during operation - High-speed and high efficient backwash process. continuous flow during the process - Disc filter films are manufactured from corrosion-resistant polypropylene and have long lifecycle - No specific tools needed. low maintenance fees 4. Application - Pre-filtration of various water purification systems such as treatment of industrial water. cooling water. dyeing. and paper manufacturing - Pre-filtration of food. pharmaceuticals. drinking water. demineralized water system and other various water purification systems. wastewater recycle. wastewater treatment. sewage treatment plants - Golf course water treatment |
Equipment |
| 1452 | SPINNER | SPINNER | Ecovic Co., Ltd. | http://www.ecovic.co.kr | 1. Outline - The collecting capacity of suspended solids is very high because it installs the additional oil separating tank at the back of vortex settling tank flowed in the exterior of tank. In addition. there is the secondary settling effect so it is available of stable and effective treatment compared to the conventional vortex facility. 2. Feature - Easy removal of suspended solids and sediments - Easy cleaning and cheap maintenance cost - Simple structure - Cheap installation cost - Available of manufacturing with various materials - Excellent treatment efficiency compared to the conventional vortex facility 3. Introduction 4. Application - New town development area - River purification facility - Road. street and large parking lot - Initial rainwater treatment of separating and combined sewer pipe - Filling station. subway station and subway base depot - Pre-treatment of water disposal plant - Recreational facilities. bridges and shopping center - Treatment of CSOs (Combines Sewer Overfows) - Industrial are and service area |
Equipment |
| 1453 | Spiral flow grit remover | Spiral flow grit remover | Taset Inc. | http://www.taset.com | 1. Outline - A device which screens and removes sand and SS mixed in influent with simple structure 2. Introduction 3. Characteristics - Circular grit chamber structure using spiral flow - Installation of impeller - Chamber refloating and absorbing grit using the principle of tornadoes - Complete refloat structure of grit using tornado block 4. Application - Remove grit mixed in influent |
Equipment |
| 1454 | Spiral Flow Waste Treatment Equipment | Hwail C&E Inc. | http://www.hwailcne.com | 1. Outline • A spiral flow waste treatment equipment that removes and refloats contamination and impurity generated from inflow facilities. such as sewage and waste water treatment plant. • It aims to remove contamination and impurities through multiple screen functions. 2. Introduction 14Biz-415_Spiral_Flow_Waste_Treatment_Equipment.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-415_Spiral_Flow_Waste_Treatment_Equipment.JPG'>3. Characteristics • One machine can collect and refloat impurities. • Variable speed is available for the amount of influent impurity. • It has a simple structure and is easy to operate and maintain. • Automatic and continuous unmanned operation is available. • It has high efficiency because it removes impurity continuously. 4. Applications • Inflow facilities of sewage and waste water treatment plants |
Equipment | |
| 1455 | Spiral-vortex type-SBR | Spiral-vortex type-SBR | SANGWON EnC | http://www.sangwonenc.com/new/en/main/main.php | Overview of technology Principle of spiral-vortex type-SBR method It applies the advanced treatment technology for removing contaminants from sewage and wastewater and discharge the treated water with air-vent type discharge system without disruption by controlling the air supply and agitation. depending on concentration of inflow water. through prediction and proportional control of DO concentration based on rotation number of speed variant floating aerator and DO gauge. Characteristics of Spiral-Vortex type SBR Technology Technical aspects Minimization of bioreactor components Simple and convenient construction Ensuring the highest quality of treated water Operation know-how Response to fluctuation of concentration load Response to fluctuation of flow load Economic aspect Reduced facility cost Reduced labor costs Lowest power consumption Reduction of construction cost Maintenance aspect Constructed of technology-intensive compact equipment Simple process configuration Reduced maintenance costs Excellent load capacity Unmanned operation Automatic control | Water Treatment |
| 1456 | SP-Joint | SP-Joint | Da-Sung Tech Co., Ltd. | http://www.spjoint.com | 1. Outline - This is a piping technology which is newly developed via the construction method of the double-press type joint. 2. Introduction 3. Character - Stainless steel pipe - 20 - 30% cheaper than other pipes - Convenience of non-welded pipe and tool - Safe from the water leak. Safe to construct - Able to change the angle after the compressing through the ring tongue - Easy to do the thermal construction because of less projected part of the compressed area 4. Application - Water supply. water heater. recirculation pipe - Heating pipe - Firefighting pipe - Pedestal-type sump pump |
Equipment |
| 1457 | Spray Booth | Spray Booth | Kim’s Skill For Green Co.,Ltd. | http://www.ksgplant.co.kr | 1. Outline - Air exhausters. dust collectors and ventilators are installed to prevent a risk of ignition or explosion when paint spray is coated and spreads. Coating facilities are classified into dry type coating facility and humid type coating facility according to an exhaust gas treatment method. Dry type coating facilities which are suitable for small products discharge exhaust gas without cleaning them. Humid type coating facilities make mist of paint absorbed in and attached to water and gather them in a water tank with a cleaning system at their back. The importance of automation lines is on the increase because the selection and use of conveyors are closely related to coating efficiency and stable maintenance of coated films and conveyors are used to carry the products. 2. Introduction 3. Characteristics - All parts of industrial components and metal products can be coated at the same time. - Effective coating according to sizes of products with a built in sensor is possible. - Matters are dried after they are moved to a dry room using conveyors or hoists. - Easy management is possible because all work can be operated through a control room. 4. Application - Oil and water coating booth for automobiles/industry |
Technology & Process |
| 1458 | Spray-Dry Reactor | Spray-Dry Reactor | KOCAT Inc. | http://www.kocat.com | 1. Outline - This facility removes the acid gas in the air pollution materials. - The pollutants are removed by the contact of acid gas and lime slurry being sprayed minutely. - Lime slurry makes the contacting reaction of air and liquid with acid gas such as HCl and SOx in the emission gases. After that. the air and liquid reaction occurs with the instant dry caused by the power (within 250℃) of the emission gases. At this time. the spraying liquid is dried instantly and becomes the vapor and the temperature of emission gases is lowered. - The reaction between acid gas in the emission gases and alkali absorbent occurs at the spraying nozzle having the best condition of transmission of heat and materials. 2. Introduction 3. Characteristics - Removal of acid gas more than 99%. - Minimizing the operating and trouble factors by simplifying the facility. - Inlet of emission gases is flowed separately by turbulent flow and series flow so the contact with slaked lime is maximized. - The body applies the system blocking the direct contact between the emission gas and body by circulating a part of treated emission gas. It saves the production cost by using the SS400 as the material of body. - The substructure is designed to prevent the building up such as slaked lime. 4. Application - Emission gas treatment facility of industrial wastes incinerator - Emission gas treatment facility of household wastes incinerator - Acid gas treatment facility of chemical process |
Equipment |
| 1459 | S-RTO (Regenerative Thermal Oxidation) | Hytech Eng | 1. Outline - This equipment combusts the odor and VOCs. - This is an energy-saving system facility to recover the wasted heat more than 95% by using the ceramic heat storage materials. - This facility is widely applied to the facilities producing carious VOCs and organic solvents. 2. Feature - Easy disassembling and assembling due to the single construction rotor - The most odor-removing efficiency among the VOCs and odor removing facilities - saving the fuel due to the high energy recovery ratio (more than 95%) - Available of recycling the treated gas of high temperature by installing the heat exchanger and boiler system. - Available of non-fuel operation if the concentration of organic materials of inflow gases is 1.5g/N㎥ - Stable performance of equipment. no modification of rotor by thermal expansion (patent technology) 3. Introduction 4. Application - Electric and semi-conductor industry - Painting industry - Film-manufacturing process - Gravure printing process - Petro-chemical industry - Food and medicine making industry - Industry producing various organic solvents and odors |
Technology & Process | ||
| 1460 | Stack Sampler | Stack Sampler | KNJ Engineering Inc. | http://www.knj-eng.co.kr | 1. Outline - Stack Sampling System is an equipment to sample the particulate material. It is manufactured to be operated safely in spite of the poor condition. It is suitable to air pollution process testing method and U.S.EPA method. 2. Introduction 3. Characteristics - Selecting the nozzle and measuring the flow speed to absorb phosphorous by the regular speed by calculating with programmed calculator and computer. - Vacuum pump of strong and large capacity and dry type gas meter of accuracy and large scale. - Accurate double manometer - Light umbilical cable and probe - Setting the heating temperature of probe - Strong Impinger Compartment box (excellently keeping warm) - Calibration of dry type gas meter and orifice meter with EPA method and providing calibration sheet - Convenient connection and separation by using quick connector at the gas connecting part - Checking the leak pressure of controller and back-current prevention equipment of manometer oil by solenoid valve 4. Application - Air pollution process testing method and U.S.EPA method for particulate. dioxin. heavy metal. arsenic. PCB. temperature. and flow speed |
Equipment |
| 1461 | Standard Carbon Block Filter Series | Standard Carbon Block Filter Series | Handok Clean Tech Co.,Ltd | http://www.hdctech.co.kr | <DIV> </DIV><DIV>Handok Clean Tech’s compressed carbon block filter is able to withstand external impacts. </DIV><DIV>While micro activated carbon provides excellent chemical absorption property. the block structure forms physical filtration layers. <br>The combined chemical and physical filtration properties provide high performance carbon block.</DIV><DIV> </DIV><DIV> </DIV><DIV>O.D x Length : 2.5“ x 10” & 2.5“ x 20”</DIV><DIV>Additional size are possible</DIV><DIV> </DIV><DIV> </DIV><DIV> </DIV> | Air Treatment |
| 1462 | Stench Prevention Facility | Stench Prevention Facility | Mirae NET Co., Ltd. | http://www.mrnet21.co.kr | 1. Outline - Mainly used as complex stench removal and prevention facility. 2. Introduction 3. Characteristics - Used in places where adhesive dust (FUME) or gas and composite stench are simultaneously created. 4. Application - Removal of complex stench |
Equipment |
| 1463 | UV Sterilization Unit of Sewerage | UV Sterilization Unit of Sewerage | Jesagi Hankook Ltd. | http://www.jesagi.co.kr | 1. Outline Jesagi Hankook Ltd. Has supplied efficient U.V Waste Water disinfection system based on system manufacturing experiences applied Plasma / U.V technology since 1991. The unit sterilizes E. Coli and other germs in water. using UV lamp that emits rays of 230 ~ 270 nm. 2. Introduction Generation of fine vibration in the inflow water increases the possibility that UV rays contact germs. thereby maximizing sterilization. In particular. pulse vibrator is used to maximize sterilization (See Fig. 1). <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000091_1.jpg><br>Fig. 1. U.V. Water disinfection system by pulse vibrator and fluid flow up</center> 3. Characteristics 3-1. Pulse water vibration unit - Causing micro-vibration to Influx water increase contact efficiency with U.V. radition time between U.V and microorganisms for maximized disinfection. - Diminishment of SS. BOD Protection of alien substance sticking on quartz sleeve 3-2. Easy maintenance - Possible to separate and substitute lamp by opening the top cover only. - Prevent the attachment of foreign materials to quartz sleeves of UV lamp and the formation of scale. 3-3. Contacting tank of flowing and floating - The plate to lead water flow is of the S character shape. which increases the opportunity for germs to contact UV rays. Thus the sterilization opportunity is increased. 3-4. The unit can be installed in any places. - The installation area is half of the horizontal type and can be easily installed even in the prior contacting tanks of chlorine sterilization. - Possible to install in the prior chlorine sterilization tanks. at proper locations such as undergrounds. roofs. machine rooms. etc. - Low operation cost: one bank is manufactured and installed in many modules. Thus depending on the load. proper modules only are operated. thus saving the operation cost greatly. 3-5. Vertical Module Design - Installation space required is smaller than horizontal type and installation is easy even though existing chlorine contact channels - It is easy to maintain the system since operator can check lamp condition by the visual inspection and can replace lamp or quartz tube after only opening cover. - U.V contact time Maximized with lamp make optimized disinfection by ‘S’ shaped water flow induction panel. 3-6. Free from installation space - It can be installed in existing chlorine contact channels. basement and machine room on the housetop. 3-7. Low operation cost - Controlling Module Q’ty used according to water condition since several modules per bank are designed. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000091_2.jpg></center> 4. Application Sterilization of supply water and sewerage | Equipment |
| 1464 | Sterilization & water treatment apparatus | Drink sterilizing apparatus | Chungsoo Water Treatment Industrial Co., Ltd. | http://www.csw21.co.kr | 1. Outline Drink sterilizing apparatus is to inject chlorine water to keep remaining chlorine of a predetermined amount inside a diaphragm metering pump. and is used for sterilization and disinfection. which are the most important in drink treatment. 2. Introduction Ozone generator has a high pressure electrode structure that a special metal is evaporated to a ceramic tube. and generates ozone by passing oxygen or air between the ceramic tube and a metal earth electrode. It generates ozone at the maximum efficiency by a fine gap. and has a long life as having a high voltage electrode inside the ceramic tube. The ozone generator can use liquid type ozone water without additional melting apparatus using an ozone melting pump and a special injector.(See fig 1. Attach-1) <Fig 1. Ozone generator for inverter> 3. Characteristics (1) It does not produce THM by combining with organisms (2) It has excellent sterilizing effect (3) It completely oxidizes organisms. such as phenol. (4) It has excellent taste and smell treatment effect. 4. Application (1) Sterilizers for food and drink manufacturing processes (2) Prevention of pathogenic bacteria pollution in swimming pools (3) Prevention of cooling tower salmonella and circulation water Chlorophyta (4) Oxidation of iron. manganese. COD. and other water treatment | Equipment |
| 1465 | Sodium hypochlorite generator | Sodium hypochlorite generator | Dong Bang Corporation | http://www.dbcorp.co.kr | 1. Outline Sodium hypochlorite generator does not need additional liquefied chlorine storing system or disaster preventing system as directly producing hypochlorite liquid on the spot by electrolysis of salt water. and is an on-the-spot type chlorine sterilizer capable of securing pliability in installation and operation as being the subject of non-regulation according to the High Pressure Gas Control Law. 2. Introduction(See fig. 1. Attach-1) 3. Characteristics (1) It does not need a liquefied chlorine storing system. and is suitable to a small-scale purification plants (2) It can supply safety raw materials. and is the subject of non-regulation according to the High Pressure Gas Control Law. (3) It realizes the minimization in maintenance. 4. Application (1) Chlorine pre-processing. intermediate-processing and post-processing in purification plants (2) Final effluent sterilization in sewage treatment plants (3) Sterilization in a cooling water treatment system (4) Chemical treatment during metal and plating process | Equipment |
| 1466 | Sterilizing Apparatus for Water Supplying Facilities | Sterilizing Apparatus for Water Supplying Facilities | Midni Co., Ltd. | http://www.midni.co.kr | 1. Outline - Eliminate noroviruses from drinking water - Noroviruses flow into the environment by excrement and pollute water sources such as river. reservoir and groundwater. - Insufficiently sterilized or managed groundwater is at a high risk of causing Norovirus infection. - The small sized particles of noroviruses easily permeate into soil and survive in groundwater environment with low temperature. 2. Introduction 3. Character - After an initial filtering of pollutants by a micro filter. the sterilizing apparatus generates ultraviolet ray simultaneously with photocatalyst to kill colon bacillus. pathogenic bacteria and especially murine norovirus. - Sterilizing performance for noroviruses. colon bacillus and poliovirus over 99.99%. 4. Application - Sterilizing apparatus for water supplying facility |
Equipment |
| 1467 | STIR Filter | STIR Filter | Hyokwang E&C Co., Ltd | http://hyokwang-enc.com | 1. Outline - STIR Filter is a next-generation automatic backwashing filter. STR filter involving a cleansing technology patented in the U.S. enables redundant matters to completely be reduced and cleansed. forestalling blockage and guaranteeing higher water quality. compared with the existing SAND filter. The redundant matters used for a STIR filter have a lifespan of more than 20 years. obviating the need to replace redundant matters. 2. Introduction 3. Character - Perfect backwashing. - Little backwashing amount (1%). - Precision filtering at a 1micron level. - SS removal efficiency with more than 95%제거 효율. 4. Application - Removal of SS filtered through river and phosphorus. - Removal of final SS in sewage treatment plant. |
Technology & Process |
| 1468 | Improvement of Storm Overflow Chamber | CSOs Screen | N4Tech Water Co., Ltd. | http://www.n4tec.co.kr | 1. Outline Development of controlling technology which can control inflow without power by changes in inflowing water level through intercepting sewer in a rainy weather 2. Introduction Interception of initial rainfall which is susceptible to contamination in a rainy weather by improving old orifice intercepting way. and interception to 3Q in case of continuous rise of water level 3. Characteristics 3-1. CSOs (Combined Sewer overflows) screen - Development of screen to minimize its plugging effect by improvements of screen structure - Wave-formed structure of screen opening not to be geared to the direction of overflow - CSOs screen which does not need an external power like electricity by using head in the rise of water level (Fig. 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=263_3.jpg></center> 3-2. Controlling device of intercepting flow - No need of external power and automatic control by the rise of water level - Compared with old technology. little attendant construction cost and easy installation - Lower price than that of the old vibrating water gate controlling device or flow controlling device by buoy - Overcome limitations on application of high cost facility like integrated rain-fall sediment management system in the current situation that storm overflow chamber lies scattered in the domestic middle- and small-size cities 4. Applied field Sewer Management (Automatic Rain Water Level Controller) | Technology & Process |
| 1469 | String-type Media Constructed Wetland | String-type Media Constructed Wetland | ASSUM ECOLOGICAL SYSTEM INC. | http://www.assum.co.kr | 1. Outline String-type Media Constructed Wetland is a wetland paved with string media as microbe media in the middle of the wetland. and have improved purification effect as they have many string-type microbe media. 2. Introduction 3. Characteristics - High purification efficiency per unit volume. easy maintenance - Used for the purification of rivers. lakes. and ponds 4. Application - Ecological filter bed |
Technology & Process |
| 1470 | STS Lining | STS Lining | Moonchang Co,. Ltd. | http://www.moonwt.com/ | 1. Outline - This is a lining technology for concrete structures such as receiving wells. sedimentation basins. filter basins. filtering tanks and distributing reservoirs in a filtration plant. or a concrete tank in general buildings. The technology is to line inner walls which are directly exposed to the water with the concrete structure with constructed STS panels. 2. Introduction 3. Character - Welding and closed lining. - Improved durability and stiffness. and elasticity adjustment in temperature variation. - Prevention of transformations or crack under temperature variation. 4. Application - Filter basins. clear wells and sedimentation basins. - Concrete tanks in general buildings. - Other kinds of concrete tanks. |
Equipment |
| 1471 | Submerged algae meter | FluoroProbe | JMEMB Co., Ltd. | http://www.jmenb.com/ | 1. Outline - It continuously measures the concentration of algae without the pre-treatment of sample by using fluorescence detection. - It can profile the algae following the depth of water at one point and measure the change of algae concentration following the time at the same depth of water. 2. Introduction 3. Characteristics - In case of measuring chlorophyll-α. it can measure the sample directly without the pre-treatment and finds the results in a second. - It can measure the concentration of whole algae and each algae (green algae. blue-green algae. diatom and golden-brown algae. - Lighting the 5 luminous sources to the sample. it can remove the error completely by the change of chlorophyll-α concentration caused by the difference of algae composition. - It can correct the error by fluorescent released substances (such as yellow substances) in the water. - It can correct the concentration of algae by measuring the transmittancy. 4. Application - Monitoring the algae of source water - Monitoring the algae of rivers and dams - Monitoring the marine algae - Monitoring the algae of mud flat |
Equipment |
| 1472 | Submerged Block Membrane | SBM | Pure Envitech Co.Ltd. | Pure Envitech Co.Ltd. | 1. Outline - SBM SYSTEM. the acronym for Submerged Block Membrane System. is a block type membrane system developed by Pure Envitech Co.Ltd. SBM SYSTEM consists of Cassettes which are composed of blocks with a flat sheet of 0.3m² and Train. 2. Introduction 3. Character - Adjust lamination layer of block and number of enumeration of cassettes in accordance with the needed treatment flux and available area for installation. - Increased cleaning effect through introduction of In-Line Circulation. various cleaning methods. stability and chemical resistance through c-PVC and PTFE membrane . reduced power cost and easy maintenance. 4. Application - Sewage and waste water treatment |
Equipment |
| 1473 | Submerged Drum Screen | Submerged Drum Screen | Mbiotech Co., LTD. | http://www.mbtmbr.com/ | 1. Outline • It is a submerged drum screen. • It can separate and remove solid contaminant and sludge from wastewater. sewage. and industrial waste water (primary treatment). Its double screen is equipped with an STS mesh inside the wedge wire (excellent for removing 50–200 um of ultra-fine particles). • It is equipped with its own booster pump to wash the inside using the screened and treated water. (Additional water for washing is not necessary.) 2. Introduction 14Biz-13.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-13.jpg'>3. Character • As a complete sealed type its effectiveness can reach almost half of the total screen area. (The treatment capacity is 2–3 times larger than previous screens.) • As a complete sealed type equipped with a by-pass line. the blocked screen can be easily handled to prevent pollution in treatment plants. • As a mesh type with a slot size as small as 0.5 mm. foreign materials. such as hair and fibrous substances. can be perfectly removed (best for MBR or membrane bioreactor preprocessing). • It operates automatically when handling emergency cases such as a blocked screen. • With the mesh separately installed. partial replacement is possible making it convenient. with low maintenance costs. • With its own impurities dehydrator. it makes it small in volume and suitable for final treatment. • With its large and efficient filtration area. it is suitable for treatment requiring a large capacity. • As it can perfectly remove fibrous substances. it is suitable for MBR preprocessing. 4. Application • Wastewater / sewage treatment • Food wastewater treatment • Industrial wastewater treatment • Reuse water treatment • Improvement of an existing facility • All sorts of water treatment |
Eco-Friendly Products |
| 1474 | Submerged Flat Sheet Membrane Of MBR | Submerged Flat Sheet Membrane Of MBR | KOReD CO LTD | http://www.ekored.com/ | <div class=left_sell> </div><DIV><B>Product Description</B><br> Membrane Biological Reactor(MBR) technologies successfully treat municipal. commercial. and industrial wastewater resulting in high quality treated water for discharge and reuse applications these days. <br> This state of art technology in “Neofil?”(Submerged flat sheet membrane) is the unique solution to meet the standard of water treatment. <br><br><B>Product Feature</B><br> * Excellent water quality through the complete separation. <br> * Reduction of excess sludge by operating with long SRT. <br> * Simple process of treatment. <br> * Easy Maintenance & control. <br> * Easy modification & upgrading of existed facilities. <br> * Hydrophilic membrane surface <br></DIV><DIV><B>Product Specification / Models</B><br> * Model : Neofil? <br> * Membrane Type : MF <br> * Module Type : Flat sheet membrane <br> * Material : Polyethersulfone <br> * Pore Size : 0.2㎛ <br></DIV><DIV><B>Application</B><br> * Sewage wastewater <br> * Municipal wastewater treatment system <br> * Livestock wastewater <br> * Septic tank <br> *Food factories wastewater <br><br></DIV> | Water Treatment |
| 1475 | Submerged membrane separation system | Submerged method MBR process | Ilsan Environment Entec Co., Ltd. | http://www.ilshinenv.com | 1. Outline - Submerged method MBR process has improved the disadvantages of the original biological process by installing a membrane separation system in a bioreactor. By this method. stable water treatment could be achieved. Also. because it is more compact than the original process. facility installation is simple 2. Introduction 3. Characteristics - Compact of device is possible - Replacement cost has decreased - Low power consumption due to suction method - Operation in high-concentration MLSS is also possible - Long-term use is possible without replacing - Taking apart and assembling module is convenient - Membrane distance adjustment is possible 4. Application - Organic wastewater disposal - Application in septic mergers - Strict effluent water quality standard areas - In cases when lots are limited - Excretion. livestock waste disposal - When recreating original wastewater disposal plants |
Technology & Process |
| 1476 | Submerged Travelling Bridge Sludge Collector | Wontec Co., Ltd. | http://www.wontec.co.kr | 1. Outline & Application Submerged traveling bridge sludge collector is a facility for member and material applied to the primary and final settling pond for water treating system purification / foul water /sewage treating plant. and applied to the settling pond whose constructional shape is a rectangle. After turbid substances in the incoming water are precipitated. this collector moves the precipitated sludge to an outlet to remove the sludge in the settling pond. making use of front & rear scrappers. 2. Introduction 3. Characteristics ① Perfect transfer of sludge - Sludge is moved to a outlet perfect by the front & rear scrappers ② All-weather scrappers - A signal generating device stopped at a precise position on inlet and outlet ③ Easy operation and maintenance - As the main components of this collector are located above water. maintenance and repairing are feasible without draining water. ④ Clean discharged water - Discharged water is clean as this collector doesn’t disturb water. 4. Application - To apply this collector to the settling pond whose constructional shape is a rectangle |
Equipment | |
| 1477 | Submerged Type Membrane System | Submerged Type Membrane System | Dong Guk Environment Co. Ltd. | www.donggukenv.co.kr | 1. Outline - The MBR (Membrane Bioreactor) is a membrane-coupled bioreactor that employs an advanced treatment process for an aerobic bioreactor and an anaerobic bioreactor and for the treatment of nitrogen and phosphorous. 2. Introduction 3. Characteristics - This product is not related to poor sinking of sludge (Bulking. Rising Sludge and etc.). - There is little SS of treated water (perfect solid-liquid separation). - This product features a simple system and a compact size (insertion as a set). - This product secures constant and stable treated water quality (below BOD 5RPPM and below SS1PPM). - This product minimizes an installation site (not requiring a settling tank and simplifying a water treatment process). - This product is convenient for the operation and maintenance (automation of operation). 4. Application - Advanced Treatment |
Equipment |
| 1478 | Submerged Type Membrane System | Submerged Type Membrane System | Dong Guk Environment Co. Ltd | www.donggukenv.co.kr | 1. Outline - The MBR (Membrane Bioreactor) is a membrane-coupled bioreactor that employs an advanced treatment process for an aerobic bioreactor and an anaerobic bioreactor and for the treatment of nitrogen and phosphorous. 2. Feature - This product is not related to poor sinking of sludge (Bulking. Rising Sludge and etc.). - There is little SS of treated water (perfect solid-liquid separation). - This product features a simple system and a compact size (insertion as a set). - This product secures constant and stable treated water quality (below BOD 5RPPM and below SS1PPM). - This product minimizes an installation site (not requiring a settling tank and simplifying a water treatment process). - This product is convenient for the operation and maintenance (automation of operation). 3. Introduction 4. Application - Advanced Treatment |
Technology & Process |
| 1479 | Submerged Wheel Truck type Sludge Collector | Sungwoo Co., Ltd. | http://www.sww.co.kr | 1. Outline It is used for the removal of deposited sludge mainly in the water purification plant. which is advantageous for the wide and long sedimentation basins. Scraper is installed on the front of submerged wheel truck. which pushes sludge to the hopper in the inlet. and it is discharged outside by the pulling valve. 2. Introduction 3. Characteristics - Removal of deposited sludge in the wide and long sedimentation basin - High speed sedimentation device can be attached on the upper part of submerged wheel truck. - Can adjust the sludge collection speed with the speed controller attached - Easy operation and maintenance with both manual and automatic operations 4. Application - Rectangular sedimentation basin in the water purification plant |
Equipment | |
| 1480 | Side-discharge-type Aerator and Mixer | YAM series | Yucheon Enviro Co., Ltd. | http://www.yucheon.co.kr/eng/ | 1. Outline A Submersible Aerator & Mixer is for mixing of non-oxygen. anaerobic tank. aerobic tank and. for Aeration & Mixing of Aeration tank. 2. Introduction Table 1 Main specification of YBM series Fig 1. Functional diagram of YAM series |
Equipment |
| 1481 | Submersible Aerator | KAQU Type | KISAN MACHINERY INC. | http://www.kisanmc.co.kr | 1. Outline - This product handles denitrification-dephosphorus treatment by functioning both as an agitator and an aerator under water. 2. Feature - This protect is used by connecting it with air supply pipes. - This product is used to handle denitrification-dephosphorus treatment by functioning both as an agitator and an aerator. - This product features an excellent oxygen-carrying capacity thanks to high efficient design. - This product is convenient to adjust the amount of oxygen supply by increasing and decreasing the amount of supplied air or conducting an intermittence drive 3. Introduction 4. Application - For aeration in sewage treatment plants and wastewater treatment plants. - For aeration in a septic tank in industrial plants |
Equipment |
| 1482 | Submersible Aerator KAQU | KISAN Machinery Inc. | http://www.kisanmc.co.kr | 1. Outline • Submersible Aerator KAQU is a submersible aerator that can control oxygen feed rate by controlling steam supply and has an excellent oxygen transfer capability. • It has an excellent oxygen transfer capability because of its high-efficiency design. 2. Introduction 14Biz-445_Submersible_Aerator_KAQU(2).jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-445_Submersible_Aerator_KAQU(2).jpg'>3. Characteristics • Operate by connecting it with an air supply pipe • For agitation and aeration as well as denitrification and nitrogen and phosphorus removal • Easy control of oxygen feed rate through the increase. decrease. or intermittent duty of steam supply 4. Application • For aeration in sewage and wastewater treatment plants • For aeration in the wastewater septic tanks of industrial plants |
Technology & Process | |
| 1483 | Submersible Aerator TJT | WNP Korea | http://www.wnp.co.kr | 1. Outline • Submersible Aerator TIF is a submersible aerator that spurts a mixed flow of air and liquid powerfully in one direction to generate agitation and aeration at the same time in an aeration tank. 2. Introduction 14Biz-444_Submersible_Aerator_TJT.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-444_Submersible_Aerator_TJT.jpg'>3. Characteristics • Its structure combines a submersible pump and an ejector. and spurts a mixed flow of air and liquid powerfully in one direction to generate agitation and aeration at the same time in an aeration tank. • It acquires a very high oxygen dissolution rate because microbubbles contact with air and liquid evenly and float. • The MLSS concentration in the aeration tank is highly uniform because jet stream agitates the bottom of the aeration tank and microbubbles float to the upper direction. • It is quiet because it works in the water so that no soundproof room would be required. and it is easy to install. 4. Application • Sewage and wastewater treatment plants • Livestock manure treatment plants • Supply oxygen to fish farms and farms |
Instrument & Chemicals | |
| 1484 | Submersible Grinder Pump | Submersible Grinder Pump | KISAN MACHINERY INC. | http://www.kisanmc.co.kr | 1. Outline - This product is used to transfer wastewater in a residential complex to a wastewater treatment plant. 2. Feature - As this product is equipped with a grinding impeller made of chrome alloy steel. it grinds strings. pieces of cloth and vinyl. and then transfers them. - This product uses various forms of grinding blades depending on the kinds of wastewater it grinds. - A double grinding function can be added separately. 3. Introduction 4. Application - Transfer of wastewater - Sewage disposal tank |
Equipment |
| 1485 | KAH Type | KISAN MACHINERY INC. | http://www.kisanmc.co.kr | 1. Outline - A submersible mixer generates lateral flows extensively. 2. Introduction 3. Characteristics This product mixes the whole agitation tank effectively by attracting fluids in the external side of a jet through powerful jet spiral flow. which in turn increases the amount of flow. 4. Application - Agitation of liquid to liquid - Agitation for the prevention of sedimentation - General agitation of industrial wastewater - Agitation of a sewage treatment tank - Prevention of destruction and precipitation of floating matters - Anaerobic agitation |
Equipment | |
| 1486 | Submersible Motor Mixer | SMX | Shinshin pump manufacturing factory Co., Ltd. | http://www.shinshinpump.co.kr | 1. Introduction & Characteristics Underwater mixer is configured in a simple manner. It is movable in every direction and exhibits excellent effects in making polluted water and nutrients homogeneous and in preventing the formation of sediments. It makes the aeration time extended by use of an air diffuser. thereby improving an oxygen supply capability.(See table 1. Attach-1) 2. Application 1) Wastewater or sewage treatment plants 2) Agitation of sediments in polluted water 3) Prevention of sediment of small solids such as lime and sand and homogenization of all kinds of nutrients in industrial factories 4) Maintaining optimal cultivating conditions such as effective oxygen supply. circulation of water. prevention of freezing. and temperature adjustment in farms | Equipment |
| 1487 | Suction-Type Gas Leakage Detector | G-1100S | WISE Sensing Inc. | http://www.wisesensing.com | 1. Outline - G-1100 is a digital-type combustible gas leakage transmitter incorporating a microprocessor that can be used through the one-on-one combination with the indicator. The product enables the on-site check of gas contents through FND (In case of 2WIRE. it should be the LCD). G-1100S also enables the measurement of gas by suctioning gas with the use of an internal pump. In addition. G-1100S belongs to a combination box. The gas detector is prone to explosion or fire caused by gas leakage and so should be installed in the place where maintenance is easily available. The indicator should be installed in the place where it is easy and safe to detect. - Magnetic device setting. 4-20mA output and other error detection features help to increase convenience and compatibility. The device’s own automatic adjustment method may help to eradicate the complexity of adjustment process. 2. Introduction 3. Characteristics - FND display indicating measured values - LED indicating the status of the device - Easy adjustment using magnet - Suctioning of gas through an internal pump - Internal setting adjustable without opening a box while power is in an “on” condition. - One cable inlet (¾” NPT. PT or PF) - Explosion proof and water-proof box (Ex d IIB+H2 T6) - ZERO SUPPRESSION function (G(X)-1100) - Easy and simple installation - Swift response - Long-term safety and life span - Linear DC 4 - 20 mA output transmission - Use of a microprocessor - The G-1100S gas leakage detector is designed to prevent industrial accidents from taking place in business sites. gas stations. petrochemical and chemical plants usually fueled by gas or generating gas (Types 1 Facility and Type 2 Facility). and thereby to detect the leakage status. In doing so. the device is used to send alarming signs to prevent industrial accidents. - The product may be used to detect combustible gas (ethane. LPG. LNG and others). poisonous gas and oxygen. 4. Application - Detection of gas leakage |
Equipment |
| 1488 | Suction-Type Gas Leakage Detector | G-1100S | WISE Sensing Inc | http://www.wisesensing.com | 1. Outline -1100 is a digital-type combustible gas leakage transmitter incorporating a microprocessor that can be used through the one-on-one combination with the indicator. The product enables the on-site check of gas contents through FND (In case of 2WIRE. it should be the LCD). G-1100S also enables the measurement of gas by suctioning gas with the use of an internal pump. In addition. G-1100S belongs to a combination box. The gas detector is prone to explosion or fire caused by gas leakage and so should be installed in the place where maintenance is easily available. The indicator should be installed in the place where it is easy and safe to detect. Magnetic device setting. 4-20mA output and other error detection features help to increase convenience and compatibility. The device’s own automatic adjustment method may help to eradicate the complexity of adjustment process. 2. Feature - FND display indicating measured values - LED indicating the status of the device - Easy adjustment using magnet - Suctioning of gas through an internal pump - Internal setting adjustable without opening a box while power is in an “on” condition. - One cable inlet (¾” NPT. PT or PF) - Explosion proof and water-proof box (Ex d IIB+H2 T6) - ZERO SUPPRESSION function (G(X)-1100) - Easy and simple installation - Swift response - Long-term safety and life span - Linear DC 4 - 20 mA output transmission - Use of a microprocessor - The G-1100S gas leakage detector is designed to prevent industrial accidents from taking place in business sites. gas stations. petrochemical and chemical plants usually fueled by gas or generating gas (Types 1 Facility and Type 2 Facility). and thereby to detect the leakage status. In doing so. the device is used to send alarming signs to prevent industrial accidents. - The product may be used to detect combustible gas (ethane. LPG. LNG and others). poisonous gas and oxygen. 3. Introduction 4. Application - Detection of gas leakage |
Equipment |
| 1489 | Sungwoo Perforated Block type Underdrain System | Sungwoo Co., Ltd. | http://www.sww.co.kr | 1. Outline Sungwoo perforated block underdrain system for rapid filter basin has been designed and fabricated with the structure to keep balanced water inflow for even distribution of air and water in the backwash process. Its air and water backwash capability is excellent. air is supplied stably through recovery path when backwashing. air and water can be distributed evenly on the whole area of filtration basin without water congested area. which is the weak point of conventional perorated block type underdrain system. and its backwash efficiency has been improved significantly 2. Introduction 3. Characteristics - Can keep equalized water inflow when backwashing with the 2 stage equalized pressure chamber - Induce equalized inflow of supplement water through even perforations on the sides of perforated block to improve air blow-off in the upper orifice. - Backwash efficiency has been improved by removal of dead water area in the mortar filled area and center area when backwashing - Advantageous to reform existing filter basin as of easy design alteration to deep filter basin by using the perforated plate for the substitution of gravel layer - Easy assembly and installation. affordable price. and superior economical efficiency 4. Application - Water collection in the rapid filter basin and distribution of backwash water for water supply and drainage |
Technology & Process | |
| 1490 | SUPER BIO | SUPER BIO | Bio HI-TECH CO., LTD | http://www.biohitechgroup.com/index.html | Click to enlarge image Product Description Super Bio: Extinctive Decomposition of organic waste into water and carbon acid gas within 24 hours by using microorganism Zero Emission of secondary waste Patent Right with Pro-Environmental Technologies Economic Advantage : No heating energy and low maintenance cost Pro-Environmental Solution : No secondary waste emission/No smelling Product Feature SUPER BIO :30kg (100 people) BM-30(116x78x90) / Power Consumption : 10KW SUPER BIO :50kg (150 people) BM-50A(300x181x148) /Power Consumption: 22KW SUPER BIO :100kg (300 people) BM-100A(400x148x176) /Power Consumption : 39KW SUPER BIO :500kg (1500 people) BH-500(401x260x225) /Power Consumption : 150KW SUPER BIO :2000kg (6000 people) BH-2000(1265x586x440) /Power Consumption : 520KW SUPER BIO :7000kg (23.000 people) BH-7000(1500x700x500) /Power Consumption : 1820 KW Product Specification / Models SUPER BIO: 30KG SUPER BIO: 50KG SUPER BIO: 100KG SUPER BIO: 200KG SUPER BIO: 300KG SUPER BIO: 500KG SUPER BIO: 2000KG SUPER BIO: 7000KG | Equipment |
| 1491 | Super Metering Pump | KCT Company Inc. | http://chem-tech.co.kr | 1. Outline • Super Metering Pumpis a continuous super metering pump that transfers quantitative liquid ultra sophisticatedly • We are producing many different types of pumps. considering durability against capacity. discharge. pressure. and high temperature other than the standard specifications. 2. Introduction 14Biz-449_Super_Metering_Pump.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-449_Super_Metering_Pump.jpg'>3. Characteristics • Non-pulsation: Does not have pulsation regardless of the reciprocating actuation pump • High precision and stability (±0.1%) • Discharge rate that remains almost unchanged despite the pressure change of the inlet and the outlet • Uses a special cam that pressesa total amount of liquid discharged from three cylinders constantly • Special plunger return system: A mechanic return method that follows behind accurately to the movement of the cam and the speed of the suction. and the discharge is completely the same 4. Application • Injection and charge to an extruder • Urethane and other resins • Chromatography and line mixture |
Equipment | |
| 1492 | Super-M | Super-M | PhilosG.C Co., Ltd. | http://www.philosmembrane.com | 1. Outline - This is a UF membrane module that is effectively applicable to food. bio and wastewater treatment. and can separate and concentrate even a MURIL with high concentration and viscosity. A hollow fiber membrane that contains PES and PSF with good heat resistance and chemical resistance is applied. This company produces membranes with various pore sizes. 2. Introduction 3. Character - Various materials and sizes ㆍPES and Psf with good chemical resistance and heat resistance are used. Housing materials are ABS and PC. ㆍSelected in a food and bio processes having membranes with various pore sizes ranging from UF to MF areas. - Low Hold-up ㆍThis is a module which is used for separation and concentration and is designed so that recovery of raw water can be easy. ㆍA problem that raw water in a module is not recovered or cleaned can be solved. 4. Application - Food. Bio separation. and concentration - Production of ultrapure water - Small-scale water treatment - Separation. concentration and refinement of high-molecular substances and nano particle substances. |
Instrument & Chemicals |
| 1493 | Supersonic sludge level meter | ENV100-S/M | Wessglobal, Inc | http://wessglobal.com | 1. Outline - This ENV-100 Supersonic sludge level meter is a measuring instrument that measures the interface (depth) of sludge which is formed in the various industrial water treatment processes such as in a settling basin at sewage treatment plants and a sludge thickener in the water purifying plant. To enhance users’ convenience. not only does it provide various types of data including letter. sludge form. data trend display. but it also ensures secure and reliable measurement through built- in algorithm which filters irregular signals or existing signals from a structure. 2. Introduction 3. Characteristics - Continuous and real time measurement - Ensures economical management by allowing simultaneous control of maximum 4 sensors with a single control panel - Stores up to 400 days of measured data while monitoring - Wireless modules simplify a cable work - Minimizes maintenance through an auto sensing cleaning system - Built- in algorithm that processes irregular signals from field structures (agitators. scrapers. and skimmers) - Provides WESSWARE which enables data analysis and menu setup 4. Application - Measures the interface (depth) of sludge |
Equipment |
| 1494 | Supersonic Water Level Meter | LEV 100 | Wess Global, Inc | http://wessglobal.com | 1. Outline The supersonic water level meter. LEV-100 series are designed to measure various kinds of liquids as well as powder accurately and stably by using the creative supersonic technology. In addition to a character-typed display. the LEV100 Supersonic Water Level Meter has a display function which checks the status of sending and receiving the supersonic waves and identifies the measuring status of the site as well as a display which stores measurement values for up to 400days and makes it possible to identify those values immediately in the site. The product has sensors which are able to measure as far as 30 meters to meet the requirements of the sites at the field. Besides. the product has many kinds of sensors like Teflon and stainless steel. This product is designed to filter the noise which could be a problem in the field and as a consequence. once it is installed. it could be continuously used without any special maintenance. 2. Feature - Able to measure continuously and in real time. - Simultaneous control of 2 sensors and output a difference of water levels. - Able to store date for up to 400days max and monitor it. - Various sensors. - ASF(Abnormal Signal Filter) - Avoid the infested structures. - Sharp beam angle of 3 degrees. - High accuracy of +/- 0.25% (Option Max. 0.20%). - Automatic temperature correction. 3. Introduction 4. Application - Water level measuring |
Equipment |
| 1495 | SUPERSONIC WAVES SLUDGE LEVEL INSTRUMENT | ENV100-P | WESS GLOBAL. CO., LTD. | http://wessglobal.com | 1. Outline The ENV-100 Supersonic Waves Sludge Level instrument is the gauge that measures the surface(depth) of sludge which is generated from a settling tank at a sewage disposal plant. a thickner at a water purification plant and other processes for water treatment in many industries. In order to promote the user’s convenience. it provides the information in various ways such as character-typed display. sludge shape display and data trend display. Embedded with ALGORITHM which filters the irregular signals that could be existed in the field or the signals caused by the structures. the instrument helps an user to conduct the stable and reliable measurement. 2. Feature - It’s portable and measureable in many different places. - Able to set the menus fitting for the site. - Output measured data using RS-232. - Minimize cable pollution with a floating sensor. 3. Introduction 4. Application - Measuring the surface(depth) of sludge. |
Equipment |
| 1496 | Swimming Pool Decontaminant | Swimming Pool Decontaminant | Youngchun Chemical Co., Ltd. | http://www.chemyct.co.kr | 1. Outline • A circular plastic capsule that contains all kinds of water treatment agents that are used for swimming pools • Contains chemicals that are harmless to humans; easy to handle • Can be used by making 1–3 holes on the surface of the capsule with a pin and inserting into the hair catcher of a pool 2. Introduction 14Biz-102.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-102.JPG'>3. Character • Maintains the best quality of the water of swimming pools. saves water and energy. provides the optimal condition for swimming for pool users by using a small amount of chemicals. and significantly contributes to the profit of those with swimming pool businesses • Contains all kinds of water treatment agents that are used for swimming pools. harmless to humans. and saves water • Can be used by easily inserting into a hair catcher without the new facility device • Used in thousands of swimming pools in the USA and Japan. including domestic swimming pools • Flocculates floating microscopic particles. which are the cause of turbidity. to prevent them from breaking and to maintain water that is 2–3 times cleaner and brighter • Breaks and returns into the pool a flock of floating particles after passing through a filter • Cannot be broken into pieces and maintains best water quality • Decreased amount of water used to clean a filter and saves water because a flock of floating materials is not easily broken and sludge does not occur • Very different from a previously used aluminum sulfate (coagulant) • Unaffected by pH and does not require a pH purifier (hydrochloric acid and others) • Harmless to humans • Allows up to 20 ppm when treating drinking water from EPA • Does not require new facilities • Reduces operating costs because of its sprinkling effect • Does not require the use of water treatment chemicals other than chlorine (sanitizer) (decreased use of chlorine) • Has an extended life cycle because it does not corrode a filtering system and piping • Produces less sludge because it is completely dissolved in the water • Can be used in combination with other swimming pool chemicals (can be used with a chlorine agent) 4. Applications • Water quality control in swimming pools |
Equipment |
| 1497 | Swirl Absorptive Washing Facility | Swirl Absorptive Washing Facility | Siwon Corporation Co., Ltd. | http://www.see1.co.kr | 1. Outline - Using Swirl Absorptive Washing Facility(MULTI-SCRONE). it condenses and recovers high temperature wet gas generated from sludge drier or incinerator by using wastewater treatment plant effluent or waste water effluent at the swirl washing facility(condenser). and accompanying dust and odorous substances are removed by absorbing and washing with microdiffusion of waste water treatment plant effluent. This is a dry emission gas dehumidification tower which conducts highly efficient removal of dust. steam. odor. and toxic gas at the same time. 2. Introduction 3. Characteristics - The dust. vapor. and odor generated by sludge are highly dense and cohesive. Especially. in a filling type washing facility(Packing Tower). sudden clogging occurs due to the formation of scales of fillings. and creates one-sided flow which reduces efficiency and makes the facility impossible to operate. and frequently requires maintenance. Swirl washing facility has no formation of scales. and has less loss of pressure with an inexpensive operating cost (electricity cost). It is also easy to maintain. and consistently maintains high efficiency of removal. 4. Application - Sewage treatment plant. waste water treatment plant. nightsoil treatment plant. landfill. intermediary treatment plant. sludge incinerator. drying & deodorizing facility. composting facility. industrial plant deodorization facility |
Equipment |
| 1498 | Swirl Air Purifier | Swirl Air Purifier | Siwon Corporation Co., Ltd. | http://www.see1.co.kr | 1. Outline - This is a product that can be used in families and hospitals. and removes formaldehyde. cigarette smoke. minute dust. and odor. and maintains a pleasant and refreshing air. 2. Introduction 3. Characteristics - Efficiency of removing formaldehyde 82%. removal of minute dust and yellow sand 78%. removal of hydrophile odorous substance over 85%. high air flow & high efficiency. - Applied Area 135m2 - Generates negative ion and plays the role of humidifier - SIZE:300x350x400mm 4. Application - Air Cleaner |
Equipment |
| 1499 | Swirl Deodorizer | Swirl Deodorizer | Siwon Corporation Co., Ltd. | http://www.see1.co.kr | 1. Outline - High-efficiency swirl deodorizer is designed into a flange type so spray nozzles are easily separated for easy maintenance. and convenient to dismantle. assemble. and replace nozzles anytime. It can be produced with stainless products in case of high temperatures. and its application is broad since it can be produced with chemical-resistant and anti-corrosive material for use with chemicals and corrosive gas. 2. Introduction 3. Characteristics - Swirl Deodorizer removes acid gas(hydrogen sulfide. mercaptan etc.) by neutralizing it using basic cleaning water into organochlorine compound state using chemical washing method. and removes basic gas(ammonia. amin etc.) by spraying acidic cleaning water. Since it conducts treatment by using both physical and chemical method. it is highly efficient and easy to maintain. - It consists of multi-scrone structure. and it maximizes combined absorptive cleaning effect by spraying swirl & cleaning water on the inlet of odorous gas. and it was miniaturized by classifying PASS into a single facility. 4. Application - Sewage treatment plant. waste water treatment plant. nightsoil treatment plant. landfill. intermediary treatment plant. sludge incinerator. drying & deodorizing facility. composting facility. industrial plant deodorization facility |
Equipment |
| 1500 | System for detecting damaged part of cut-off membrane | System for detecting damaged part of cut-off membrane using a potential value measuring method (RMS) | SINSIN Pharmaceutical Company Ltd. | http://www.sinsin-pharm.com | 1. Outline This technology is to detect a damaged part of a cut-off membrane using a method for measuring potential value (R.M.S) of the bottom (ground) of the cut-off membrane. Before the cut-off membrane is installed. a sensing electrode and a cable. which are suitable for the site condition. are installed at the upper part of the ground (the bottom part of the cut-off membrane). where the cut-off membrane will be installed. So. after the installation of the cut-off membrane and protective soil. an operator can check the damaged part of the cut-off membrane just before the wastes are buried in the ground. and detect and repair the damaged part at any time even during reclamation work. |
Technology & Process |
| 1501 | T&T SBR SYSTEM (Floating Surface Aerator(SWT2000-semipermanent, FRP)) | T&T SBR SYSTEM (Floating Surface Aerator(SWT2000-semipermanent, FRP)) | Sangwon EnC Co., Ltd. | http://www.sangwonenc.com/ | Product Description T&T-SBR System represents a variation of the activated sludge process. the system works by bacteria which is effective in removing BOD. COD and nutrients being part of organic wastewater. The System is unique in its ability to act as (an equalization basin). aeration tank and final clarifier by use of only one single tank. defined as Reactor. The T&T-SBR does not allow influent wastewater to enter the reactor during the final aeration. settle and decant phases. thereby assuring an excellent quality of final effluent. Because the T&T-SBR operates in a real batch treatment mode. optimum effluent quality is obtained during each cycle. Only a fraction of the total reactor volume. typically approx. 30 %. is introduced into the reactor each cycle This raw flow is combined with the acclimated biomass. which remains in the reactor at all times. The ratio of the incoming raw flow to biomass is a key factor in obtaining desired effluent quality results in each Reactor. Since only a small amount of sludge is wasted each cycle. the quantity of the biomass (activated sludge) is always maintained. The use of a surface aerator. installed at a floating construction. guarantees trouble-free operation. easy maintenance and (by varying speed) only one equipment for aeration (high speed) and mixing (low speed). The use of microprocessor controlled phases enables the operator or engineer to vary the operating strategy of the T&T-SBR to suit the treatment requirements. Normally. the process follows the basic steps of fill. react. settle. decant. and Idle. The ability to create aerobics. anaerobics or anoxic conditions within the reactor results in flexible operation. better treatment of the waste and optimum effluent quality. Product Feature ․ High-oxygen transfer rate and High-efficiency(2.0～2.5kgO2/kWh) Process is simple due to oxygen supply and mixing of reaction tank accomplished by a floating surface aerator(SWT2000-semipermanent. material; special FRP(Fiberglass Reinforced Plastic) produced and manufactured by Sangwon EnC). The automatic operation reduces maintenance of the reaction tank and the total operation costs are extremely low. ․ Shock loads have no negative influence on the purification performance of the reaction tank due to automatic operation by DO sensor connection(PID control). ․Total site requirement is reduced from 30 to 40% compared with conventional activated sludge process Product Specification / Models - Floating surface aerator(SWT2000-semipermanent. FRP) . SWT2000-900model. . SWT2000-1250model . SWT2000-1600model . SWT2000-2000model . SWT2000-2500model Application wastewater treatment | Equipment |
| 1502 | Tap Water Disinfection System | MIDNI, Inc. | http://www.midni.co.kr | 1. Outline • This tap water disinfection system disinfects bacilli. such as noro virus. colon bacillus. and others. to prevent food poisoning. 2. Introduction 14Biz-163.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-163.JPG'>3. Characteristics • Noro virus disinfection: UV and photocatalytic disinfection works at the same time in the disinfection system after removing the first contaminants using a microfilter so that it has an excellent sterilizing power (99.99% or more) against colon bacillus. pathogenic bacillus. and particularly. murine noro virus. • Pathogenic bacillus disinfection: Excellent disinfection performance has been proven after conducting disinfection inspection on the inspection standard items of drinking spring water. such as salmonella. sulfite reductase anaerobic spore former. shigella. and others. 4. Application • Drinking water / food industry • Hospitals • Schools and education facilities |
Technology & Process | |
| 1503 | Tapping Center | TX-30A | DSHT | http://topdsht.com/eng/ | Specifications - Machining optimization Compact type Armless type ATC - High utilization broad single table equipped(Table Size : 650 X 400) - Secure reliability by applying high speed machining LM GUIDE and Ball-Screw - Control precise location and rapid traverse by applying strong traverse system Servo motor - Main-axis adjustment 0<-->12.000rpm in 0.5sec - Ragid Tapping -> 6.000rpm Features - Spindel Speed(rpm): 12.000/15.000(Standard/Option) - Spindle Power(KW): 2.2/3.7(Consecutively/30min) - CNC SYSETEM: M70V - TABLE SIZE(mm): 650 X 400 - Travel(X/Y/Z)(mm): 520 X 400 X350 - Rapid Traverse(X/Y/Z): 50/50/50 - Tool Storage: 14/21(Standard/Option) | Equipment |
| 1504 | TBCR Design | TBCR Design | CI Biotech Co., Ltd | http://www.cibio.com | 1. Outline - Recharged carrier coated with nitrate microbes hastens initial nitrate stabilization and keeps nitration ratio high even during winter period as advanced treatment technology applicable to nitrogen and phosphorous 2. Introduction - Biological reaction tank consists of an aerobic tank. an oxygen-free tank. an aeration tank and an oxygen-reducing tank. while all of inflowing water goes to the anaerobic tank. In an aeration tank. nitrate microbe coated carriers (CIMEN-DOC?) are charged to hasten nitrate stabilization in an initial stage. simultaneously processing organic matters. phosphorous and nitrogen. 3. Character - Good adaptability to existing standard activated sludge treatment process - Low carrier charge ratio - Low sludge treatment cost - Minimized chemical and electric cost - Simultaneous removal of organic matters. nitrogen and phosphorous - Nitrogen removal ratio in winter - Adaptability to load change - Smooth attachment and detachment of microbes - Low chance for closing gap - Simultaneous removal of organic matters. nitrogen and phosphorous in biological terms 4. Application - TBCR Process |
Technology & Process |
| 1505 | Techflow PORPRO | Techflow PORPRO | CS Technofil Co., Ltd. | http://www.csfilter.net | 1. Outline • It is a filter that maximizes flow treatment capacity and particle collection capacity using bending materials to make the maximum use of filtration area. 2. Introduction 14Biz-142.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-142.JPG'>3. Characteristic • Excellent particle removal performance • Outstanding flow treatment capability and particle removal amount • Diverse filtration grade • Excellent economy for efficiency • Manufactured in a 10.000 classes of clean room 4. Applications • Bio-industry • Food and beverage industries • Chemistry / petrochemistry industries • Film and textile industries • Ro/di filtration • Electronics industry • Cosmetics |
Equipment |
| 1506 | Technique to turn livestock manure into resources using SAB (Shingang Advanced Biological Reactor) | Technique to turn livestock manure into resources using SAB (Shingang Advanced Biological Reactor) | SHINGANG HI-TECH CO., LTD | http://www.sgenv.kr/ | 1. Outline SAB (Shingang Advanced Biological Reactor) technique is a technology to turn livestock manure into energy by separating excrements and urine with a centrifuge. making excrements into marketable fertilizer after composting and urine into high-quality liquid fertilizer. which is used based on regional and seasonal demands. using SAB technique. 2. Introduction 3. Characteristics - Produce liquid fertilizer through hydrodynamic reaction with highly-concentrated aerobic microbes - Produce customized liquid fertilizer meeting the demand of users by removing dissolved organic matters completely and adjusting nitrogen content (randomly adjust nitrogen content) - Produce concentrated liquid fertilizer by limiting the elimination of emulsion-type fertilizer components through a freeze-melting method treatment operation - Kill E. coli and accelerate the production of liquid fertilizer with high temperature aerobic reaction (40~60℃) - Produce liquid fertilizers both for house farming. which requires fertilizer without solid matters. and for general farming. which does not require the removal of solid matters. through the second elimination process of solid matters using centrifuge - Have no re-decay by microbes when stored for a long time and no changes in quality by the second elimination process of solid matters using centrifuge - No unnecessary loss of nutrients by rapid process of making liquid fertilizer (takes about 24 hours) - Reduce electricity cost by more than 60% compared to the conventional compost method by using rapid process and an air-liquid mixing pump which is more efficient in delivering oxygen - Encourage the activation of microbes by increasing dissolved oxygen efficiency with an ejector and air-liquid mixing pump. reduce the noise by decreasing the capacity of air blowers - Strong to the changes in concentration and amount of influents by retaining highly-concentrated aerobic microbes - Reduce land and construction cost by cutting staying time - Freely adjust air supply volume and agitator speed by an air-liquid mixing pump which can change number of revolutions from 10 to 1.500rpm - Automatic operation - Designed after considering the engineering efficiency as it is developed as part of the next generation project of the Ministry of Environment 4. Application - Waste-to-energy |
Technology & Process |
| 1507 | High-Speed Waste Energy High-Temperature Breakdown Power Boiler | High-Speed Waste Energy High-Temperature Breakdown Power Boiler | ES ENEERGY Co., Ltd. | http://eses.co.kr/ | 1. Outline - The high-speed waste energy high-temperature breakdown power boiler is designed to recycle waste with a high energy content. selected from combustible wastes discharged from industrial sites and households. into waste heat and electricity and other energy source for industrial activity through a incineration and heat recovery technology. 2. Introduction 3. Characteristics - The technology is designed to break down heat fueled by solid fuels such as RDF. FRDF. RPF. FRPF. combustible domestic and industrial wastes and to simultaneously conducts the process of drying. carbonizing and combustion. - No need for the Up-Down of steam production for quantitative supply. - Power boiler applicable to high-temperature heat emissions. 4. Application - Power boiler |
Technology & Process |
| 1508 | Real-time Remote Monitoring System | Real-time Remote Monitoring System | BUILTINKOREA INC. | http://www.builtinkorea.com | 1. Outline - To develop an image transmitter that has video encoding technology. audio technology and DSL technology that is used in the broadband internet communication - To develop device that can make long-distance transmission up to 5.5 km by just connecting to the phone line and device that can transmit images and sounds through phone line and internet network to anywhere in the world without extra system - To enable the real-time remote monitoring by substituting the transmission media of remote monitoring with the phone line 2. Introduction 2-1. Background - Initial cost and maintenance cost of the existing video monitoring systems for the monitoring of pollutants and basic facilities of environment are very high so they can not be easily used. - Mostly the visual observation relies on the observer’s eyes but it is affected by observer’s skill. non-uniform sky. shape of the object. and so on. Real-time monitoring is impossible. - There needs to a visual monitoring system that provides the most realistic data and is standardized and automatic. 2-2. Process |
Evaluation & Analysis |
| 1509 | Thermal Shock Chamber | WEH-S-500 Series | Won Electric Heater Co., Ltd. | http://www.wehc.com | 1. Outline - WEH-S-500 Series are thermal shock testers as environmental testing device. 2. Introduction - Basket driving method: air cylinder or chain - Safety cevices: Earth leakage breaker. over heat protector. N.F.B. ref. overload relay ref. hi/ low pre. S/W. door switch Heat-up time: 49℃/min (-65℃ ~ 180℃/ 5 min below) Cooling-down time: 49℃/min (180℃ ~ -65℃/ 5 min below) Operation method: Auto and manual operation by selection Temperature recording system: 100 mm 6point hybrid recorder Power source: 200V AC 3ø 60Hz (50Hz) Material interior: STS 304. 1.0 t polishing. Exterior: Separate body painting (STS external specifications by order) Insulation: Glass-wool and polyurethan form Cooling system: Dual stage cascade condensting system. water cooling or air cooling 3. Characteristics - Since it moves in its testing material chamber. it is effective in heat shock. - It is capable of installing small testing material by setting the testing material shelf inside it. - It is easy to manage programs. 4. Application - Electronics industry - Automobile industry - Space. air industry - Basic material industry | Instrument & Chemicals |
| 1510 | THC Reduction Technology (Catalytic Oxidation Equipment) | Recuperative Catalytic Oxidation (RCO) | Yousung Tech Co., Ltd. | http://www.iyousung.co.kr/ | 1. Outline - THC treatment technology is classified into combustion. absorption and biological treatment according to the method of treatment. As an applicable treatment technology is different depending on the conditions of the generation source of THC. consulting along with a site survey by an expert is required. Recuperative Catalytic Oxidation is equipment that carries out oxidation decomposition of THC substances into water and carbon dioxide at the temperature of 250 to 400℃ using catalysts such as Platinum (PT) and Palladium (PD). 2. Introduction 3. Characteristics - Oxidation decomposition treatment of THC at low temperature - Small generation of secondary pollutants including Nox - Relatively high treatment efficiency of 95 to 98% - Convenient operation and management 4. Application - THC Reduction |
Technology & Process |
| 1511 | THC Reduction Technology (Concentration Catalytic Oxidation) | Concentration Catalytic Oxidation (CCO) | Yousung Tech Co., Ltd. | http://www.iyousung.co.kr/ | 1. Outline - THC treatment technology is classified into combustion. absorption and biological treatment according to the method of treatment. As an applicable treatment technology is different depending on the conditions of the generation source of THC. consulting along with a site survey by an expert is required. Concentration Catalytic Oxidation (CCO) is a system that conducts primary adsorption treatment of THC of a large air volume and low concentration. and conducts secondary desorption treatment of adsorbed concentrated THC. and converts the treated THC into THC of a small air volume and high concentration and then carries out catalytic oxidation decomposition of THC. 2. Introduction 3. Characteristics - Applicable to large volume treatment - Maintaining a certain degree of treatment efficiency constantly as absorbents are regenerated and treated - Small generation of secondary pollutants such as Nox and Sox - Smooth supply and demand of absorbents - Possible non-continuous operation 4. Application - THC Reduction |
Technology & Process |
| 1512 | THC Reduction Technology (Regenerative Thermal Oxidation) | Regenerative Thermal Oxidation (RTO) | Yousung Tech Co., Ltd. | http://www.iyousung.co.kr/ | 1. Outline - This THC treatment technology is classified into combustion. absorption and biological treatment according to the method of treatment. As an applicable treatment technology is different depending on the conditions of the generation source of THC. consulting along with a site survey by an expert is required. Regenerative Thermal Oxidation is equipment that reduces THC by employing a principle of converting THC into carbon dioxide and water through thermal oxidation reaction with the method of brining THC substances into contact with temperature higher than ignition point. 2. Introduction 3. Characteristics - More than 99% treatment efficiency - Maintaining a certain degree of treatment efficiency - More than 95% heat recovery rate - Nonfuel operation for inlet concentration of more than 1000ppm - Compact equipment - Convenient operation and management - Long durability period 4. Application - THC Reduction |
Technology & Process |
| 1513 | The SW-CAST Phosphorus Removal Coagulant Injection Rate Control System | The SW-CAST Phosphorus Removal Coagulant Injection Rate Control System | SAMBO SCIENTIFIC CO., Ltd | http://www.sambosc.com | 1. Outline This SW-CAST Phosphorus removal coagulant injection control system is designed to automatically control a coagulant rate for the removal of phosphorus in sewage and waste water treatment facilities. In addition. the device works through the operation of an automatic diagnosis operation system and automatically controls a coagulant injection chemical pump. 2. Introduction 3. Characteristics - Featuring an automatic sampling and rinsing system -Automatic cleaning system: measurement cell. piston. automatic sample line cleansing. automatic cleaning hours and frequency control - Determining a coagulant injection rate based on standard coagulant requirement - Save data regarding turbidity. conductivity. alkalinity. TOC. pH. temperature. flow. coagulant injection on a real time basis (option). - Setting parameter and display in a high-performance processor while software displays and saves an optimal curve - Measure parameter display: flow dislocation (mV) vs coagulant requirement (ml). -Capable of saving a certain measurement method or a standard optimized method in the system - Capable of setting calculation output to directly control a coagulant injection pump (option). 4. Application - Sewage and waste water treatment facilities |
Technology & Process |
| 1514 | Thermal decomposition incinerator | Thermal decomposition incinerator of domestic wastes containing sludge | Young Engineering Co., Ltd. | http://www.young-eng.co.kr | 1. Outline This system includes a first thermal decomposition furnace for carrying out feeding. drying. dry-distillation. thermally decomposing and incinerating processes of waste matters. and a second combustion furnace for completely burning thermally decomposed carbonization gas generated by the first thermal decomposition furnace. This system is to burn waste matters at the optimum temperature by controlling and supplying combustion air of a proper amount into each combustion chamber. 2. Introduction (see fig. 1) |
Equipment |
| 1515 | Thermal desorption system | Dongmyung Ent. Co., Ltd. | http://www.dm-ent.co.kr/ | 1. Outline - Polluted soil from oil is put into kiln and mixed organic substances are desorbed from the polluted soil when it goes up to 600~850℃. Finally. it is oxidized and emitted through a discharge pipe. 2. Introduction 3. Characteristics - Small installment area and moveable equipment - Treat from light oil to heavy oil such as lubricating oil - Processing power: Over 60.000ppm. carbon up to C40 - Temperature : 600 - 850℃ - Processing amount : 15ton/hr 4. Application - Treating light oil (gasoline. diesel). heavy oil (bunker fuel. lubricating oil). solvent. insecticide. |
Equipment | |
| 1516 | Thermal Imaging Camera | T335 | JEIL MI CO., Ltd | http://www.jeilmi.com | 1. Outline This FLIR T335. small-sized light-weight thermal imaging camera. stands out in infrared imaging quality. high breakdown capability and extensive temperature measuring range. The device informs a maintenance technician of the exact place where heat and problem occur in an electric facility. The T335 not just is capable of inserting a thermal image into a real image and attaching texts and sound memos but also provides exchangeable lens. 2. Introduction 3. Characteristics - High-resolution infrared thermal image : infrared breakdown feature with 320 x 240 pixels. NETD 50 mK - Digital camera: Capable of delivering a clear image backed by a 3.1 mega pixel of resolution and LED lighting - Extensive temperature range: Best suiting the needs of industrial sites with the measurement range of -20°C ~ +650°C - Zoom feature: 2x digital zoom for enlarged measurement - Insertion of a thermal image into a real image(PiP) : Capable of inserting a thermal image into a real image - Laser pointer : Pointing thermal point in thermal image exactly toward actual object - Attaching memo (note): Capable of attaching sketch and image marker through a touch screen - ±2% of accurateness: Highly reliable temperature measurement - Thumbnail image gallery: Capable of swiftly searching saved images - MeterLink™ : Wirelessly transferring measured electricity and vapors to a thermal imaging camera - USB Copy : Using USM memory device to upload image and measurement data - IR-bandwidth automatic adjustment: Capable of automatically controlling sensitivity through stable infrared wavelength when checking high electric pressure -Lithium-ion recharge battery : Rechargeable battery operable for four hours in a row -Exchangeable lens: Standard 25° lens and option 15°.45° and 6°. 90° lens - Standard SD card: Capable of saving more than 1.000 sheets of radiometric JPEG thermal images 4. Application - Thermal measurement |
Equipment |
| 1517 | Thermal Mass Flow Meter 620S/640S | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline - A thermal mass flow meter is a flow meter that measures the mass of gases and vapors by measuring the difference of temperature between two heat transfer sensors. The thermal mass flow meter does not need a separate temperature sensor. a pressure sensor and a flow computer as it automatically compensates for temperature and pressure. Its main purpose of use varies depending on the fields ranging from aeration tank line. methane gas at landfill sites. building duct lines. semiconductor industry. iron and steel manufacturing industry to the petrochemical industry in addition to water treatment. 2. Introduction 3. Characteristics - The 640/620S Insertion Mass Flow Meter detects the mass flow of gas by compensating for temperature and pressure automatically. - The application size of this product ranges from 1 to 72(25mm~1800mm) so that it is primarily used to measure the mass flow of large-caliber pipes. - The main purposes of use include various applications ranging from an aeration tank line in water treatment in the environment industry. digest gas and methane gas in landfill sites. large caliber gas duct lines of buildings to the measurement of various gases and special gases in general businesses. - Thanks to the advantages of an insertion type. these products can be installed and separated anywhere (top. bottom. left. right) of a pipe so that their maintenance is very convenient. 4. Application - Thermal Mass Flow Meter 620S/640S |
Equipment | |
| 1518 | Thermal Mass Flow Meter 730 | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline - A thermal mass flow meter is a flow meter that measures the mass of gases and vapors by measuring the difference of a temperature between two heat transfer sensors. The thermal mass flow meter does not need a separate temperature sensor. a pressure sensor and a flow computer as it automatically compensate for temperature and pressure. Its main purpose of use varies on the fields ranging from aeration tank line. methane gas in a landfill. building duct line. semiconductor industry. iron and steel manufacturing industry to the petrochemical industry in addition to water treatment. 2. Introduction 3. Characteristics - The 730 Accus-Mass flow meter for gases automatically compensates temperature and pressure and measures gases with gaseous mass. The product is applicable to the pipes with a size ranging from 1/4 to 3. - Response speed is very fast. - Possible to conduct a precise flow measurement. - Cheap price. - Mainly applicable to clean corrosion-free gases. 4. Application - Thermal Mass Flow Meter 730 |
Equipment | |
| 1519 | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline - A thermal mass flow meter is a flow meter that measures the mass of gases and vapors by measuring the difference of temperature between two heat transfer sensors. The thermal mass flow meter does not need a separate temperature sensor. a pressure sensor and a flow computer as it automatically compensates for temperature and pressure. Its main purpose of use varies depending on the fields ranging from aeration tank line. methane gas at landfill sites. building duct lines. semiconductor industry. iron and steel manufacturing industry to the petrochemical industry in addition to water treatment. 2. Introduction 3. Characteristics - This Thermal Mass Flow Meter 780S for Gas features a high degree of precision as it detects. directs and outputs mass flow of gas by automatically compensating for temperature and pressure. - This Model 780S is classified into a flow meter for the general industry and a super purity flow meter for gas which is used in the semiconductor industry and in the bio industry. The product is applied to various fields including the environment industry. the iron and steel manufacturing industry. the semiconductor and bio industry. the petrochemical industry and the chemical industry and so on. 4. Application - Thermal Mass Flow Meter 780S |
Equipment | ||
| 1520 | Three-Wave Electrode-Free Lamp | Three-Wave Electrode-Free Lamp | Soko Korea Co., Ltd. | http://sokokorea.com/ | 1. Outline - The electrode-free lamp contains no electrodes (filament. luminous panel) unlike the existing fluorescent light and features ferrite core outside of a bulb (in round or rectangular shape) in which a mixture of gases is encapsulated. When the power input is allowed through an electronic stabilizer specially designed to give off a high frequency (230kHz) in ferrite core. the magnetic field comes to arise. resulting in the creation of ultraviolet light through the reaction with the gases encapsulated in the bulb. This. in turn. infiltrates the three-wave fluorescent substances coated in the inner side of the blub. leading to the emission of visible rays. These features are combined to further elongate the life span and promote efficiency and color rendition of an electrode-free lamp. 2. Introduction 3. Characteristics - Long life span: Cost-effective in maintenance - Energy saving (More than 35 percent of energy can be saved compared with the existing ones). - Producing natural colors due to reinforced color rendition - Immediate and re-lighting - Low heat calories - Less eye fatigue - Nature-friendly lighting 4. Application - Lamp |
Equipment |
| 1521 | Tidal Power Generating Facility | Tidal Power Generating Facility | Ecocean Co., Ltd. | http://www.ecocean.co.kr/ | Tidal Power Generating Facility 1. Outline • This eco-friendly power-generating facility uses the rapid flow of seawater. which flows from power plants after it is used as cooling water. • It lowers the effluent temperature without causing an impact on the surrounding marine ecosystem. 2. Introduction 14Biz-80.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-80.JPG'>3. Character • Capacity: 75 kW • Frequency: 60 Hz • Voltage: 380 V • RPM: 514/min • 6 M (L) × 4.4 M (W) × 10 M (H) steel frame structure 4. Application • Power plants • Tidal power plants |
Equipment |
| 1522 | Tire metal wire remover | Tire metal wire remover | Tire metal wire remover | http://www.samickeng.com | 1. Outline - If the wires in the tires are not removed before shredding. it can decrease the life of the shredder knife. So in order to prevent this kind of loss. steel wire remover was developed. The equipment separates the tire from the wire and increase the life of the knife while enabling recycling of another valuable resource. 2. Introduction 3. Characteristics - The equipment can efficiently remove the metal wires (piano wires) buried in the tires. Regardless of the size of the tires. it can also automatically remove the steel frame. - Currently one-way removal and two-way removal equipment has been developed and it is one of the most efficient equipment of its kind. - The equipment automatically adjusts according to the size of the input tire. With installation of automatic limit and sensors in the pressure cylinder. the wires can be effectively removed. 4. Application - Be removing the metal wires before shredding and grinding. the metal wires can be reused and more tires can be put into the shredder. ultimately producing more shreds. It also substantially reduces the wear and tear of the expendables (knives). |
Equipment |
| 1523 | Titech AutoSort MF | Titech AutoSort MF | Titech | www.titech.co.kr | Sorting with TiTech means - Innobative technology - selection of between 6 different sensors - High purity - up to 98 - High efficiency - up to 95 - High precision - even the smallest of particles are recognized - High throughput performance - up to 30 metric tons per hour. depends on application and material TiTech machines lower costs - High availability: round-the-clock operation - User-friendliness: minimal training necessary - Quick and easy installation - Minimal maintenance required - Low energy consumption [Applications] 1. Mixed packaging waste - Positive sorting of beverage cartons. PE. PP. PS. PET. EPS. paper etc. - Sorting of mixed polymers from other material 2. PET bottle recycling - PVC from PET stream 3. Refuse derived fuel (RDF) -PVC from mixed waste - RDF from municipal waste | Equipment |
| 1524 | T-N processing equipment | DBR System | Ecovic Co., Ltd. | http://www.ecovic.co.kr | 1. Outline - Waste water that occurs from industry equipments is released in mixed waste water condition including various heavy metals and T-N. T-P. Among these. total nitrogen(T-N) processing. which regulation is becoming reinforced lately. is coming up as a big problem in industry - At first by physicochemically removing inorganic pollutants such as hazardous heavy metals. removal of T-N using the DBR process method. which is a biological process method. is used for T-N process 2. Introduction 3. Characteristics - Small amount of required lot area - Capable of recreating original process - Low operation cost - Excellent processing efficiency 4. Application - All industries which aren’t applicable for T-N process - Chemical processing industries like plating water |
Technology & Process |
| 1525 | T-N/T-P Analyzer | T-N/T-P Analyzer | DaAll ENG Co., Ltd. | http://www.daalleng.kr | 1. Outline - T-N/T-P Analyzer continuously measures total nitrogen and total phosphorous in the water using LFA method. LFA method reduces consumption for long-term use without special maintenance. It can measures and analyzes ammonia and alkali at one time. 2. Introduction 3. Character - The analyzer continuously measures total nitrogen and total phosphorous in the water using LFA method. - LFA method reduces consumption for long-term use without special maintenance. - It can measures and analyzes ammonia and alkali at one time. - The auto filter system is installed to prepare the analysis of waste water/sewage water and to use the analyzer long time. 4. Application - Waste water treatment plants. sewage water treatment plants and water treatment plants. |
Instrument & Chemicals |
| 1526 | TO (Thermal Oxidation) | TO (Thermal Oxidation) | Hytech Eng | 1. Outline - It treats VOCs stably by collecting the discharged VOCs and combusting them by 650~870℃. After that. it warms up VOCs flowed in the combusting chamber through the heat recuperative equipment and discharges the treated gas in the air. 2. Feature - It is suitable for the organic compounds treatment facility of small capacity and high concentration. - There is not a small trouble because it can operate the system stably and the machinery is simple. - When the large amount inflows. it is possible to make the compact facility by adding the condensing equipment. - General detention time of combusting chamber is between 0.5 and 1 second. If there is a halogen compounds. the detention time is designed more than 1 second. 3. Introduction 4. Application - Electric and semi-conductor industry - Printing industry - Petro-chemical industry - Food and medicine making industry - Chemical industry - Sewage disposal plant - Food waste treatment - Industry producing carious organic solvents and odors |
Technology & Process | |
| 1527 | TOC Automatic Analyzer | TOC-100 | ESTEKO CO., LTD. | http://www.esteko.co.kr/ | 1. Outline - This is an online/offline automatic analyzer to measure TOC (Total Organic Carbon) containing in rivers. lakes. seas and industrial waste water quickly and accurately. 2. Introduction - Measurement range : 100~1000mg/L . 0~50mg/L. - Measurement frequency : 4 minutes. - Measurement method : Automatic batch hydrochloric acid air aeration system. - Repeatability : 2% full Scale 3. Character - Long-term stable measurement. - 650℃ low temperature sealing combustion method. 4. Application - Automatic Analyzer |
Equipment |
| 1528 | TOC Continual Auto-Analyzer | TOC Evolution | Humas Co., Ltd. | http://www.humas.co.kr | 1. Outline - TOC Continual auto-analyzer has high accuracy and continual measurement function. 2. Introduction 3. Character - High accuracy. - Continual measurement. - Compact size. - Reduction of reagent the quantity of reagent used. 4. Application - TOC Continual auto-analyzer |
Equipment |
| 1529 | TOC Measuring Instrument | TOC Measuring Instrument | Lar Korea Co. | http://www.larkorea.com | 1. Outline - LAR’s TOC analyzer is an online measuring instrument to measure the amount of total carbon. total organic carbon. total inorganic carbon. and dissolved organic carbon. This instrument is applicable to almost all measurements for sewage treatments and industrial waste water application programs. 2. Introduction 3. Character - High temperature combustion. - Rapid and accurate measuring result. - Representativeness. - Cost saving. 4. Application |
Equipment |
| 1530 | TOGA? Puri Intelligent, Movable/TOGA-M01D | TOGA? Puri Intelligent, Movable/TOGA-M01D | GTSCIEN Co. Ltd | www.gtscien.com | <div><div><b>Toxic gas purification system is purifying toxic gas. VOC.'s. fumes. and keep a clean environment of laboratory and a health of researcher. </b></div><div> </div><div>- Removing toxic gas more than 99.7% by use the patented TOGA filter </div><div>- Adjustable wind velocity as experimental application(5step)</div><div>- Preset operation time </div><div>- Auto control by density of VOC’s Ductless type to easy installation and prevent heat loss </div><div>- Compact design with flexible arm rotating in a 360° arc </div><div>- Specification </div><div> Absorption capacity : 10m3/min </div><div> Power consumption : 169W </div><div> Power input : 220V. 50/60Hz</div></div><div> </div> | Air Treatment |
| 1531 | Toilet Janitor | Toilet Janitor | Ecozone Inc. | www.ecoz.co.kr | <div> </div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l0 level1 lfo1><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>- Features: Without using harmful chemical. toilet can be kept clean without your hands get dirty. Our patented Toilet Janitor will have water do your dirty cleaning work! It kills germs and prevents scale build-up in your toilet. It removes bad smells as well. </span></div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l2 level1 lfo3><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l2 level1 lfo3><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l2 level1 lfo3><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>- Duration: 6 months (simply add a new one into your water tank)</span></div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l2 level1 lfo3><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l2 level1 lfo3><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>- Usage Instruction: (1) Just place it into toilet water tank. (2) Wait for a few minutes. flush. and clean the toilet bowl just once. (3) Brush the toilet lightly once or twice a week.</span></div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l3 level1 lfo4><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l3 level1 lfo4><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>- Effect: Prevent scale build-up. Remove foul smells from the bathroom.</span></div> <div class=1 style=mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt; mso-list: l3 level1 lfo4><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> <div class=0 style=-ms-layout-grid-mode: both; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span style=mso-fareast-font-family: 한컴바탕> <o:p></o:p></span></div> | Eco-Friendly Products |
| 1532 | Top-down filtering device | SSF-XXX | DI Enviro Co., Ltd. | http://www.di-eng.co.kr | 1. Outline - As a top-down sand filter. excellent filtering ability. continuous operation. and economic maintenance/management are possible. With low head loss. it is designed to be appropriate for most existing plant’s hydraulic calculation. and can reduce required space with high filtering rate 2. Introduction 3. Characteristics - Control and pipe structure are simple - Filtering medium cost is low - Reduction of required space for equipment is possible - Appropriate for existing plant’s hydraulic calculation due to low head loss - Operation is simple and maintenance/repair is convenient - Life cycle is extended due to durable material - With continuous cleansing of media. treated water that always has consistent water quality can be produced 4. Application - Water purification - City waste water treatment - Industrial waste water treatment - Pre-treatment of UF or activated carbon process - Treatment of leachate in landfill - Purification of soil pollution |
Equipment |
| 1533 | mist collector | ELECOL-Series | WOOYANG ENG CO.LTD | http://www.wooyangeng.co.kr/ | 1. Principle of filter which has interruption of electric power When pollution particles are collected. bigger particles are collected by the Pre-filter and smaller particles are charged with electricity (+) in the Ionizer. Atoms are stuck and collected on the collection cell while they pass through the filter. which has interruption of electric power 2. Extra item and features -IONIZER (discharged CELL) It is a specialized Spiked Type - not a Wire Type - and uses SUS304. So you don't have to worry about disconnection and corrosion. -COLLECTOR CELL It has been well tested for length. interval. section. insulator's material and location. (Utility model patent No. 0293402) 3. Application - Generation sites of D.O.P - Processing plants for P.V.C sheet. Wall paper factories. Synthetic leather factories - Generation sites of oil mist High Voltage Processing plants. CNC turnery. Engine manufacturing. - Generation sites of dust Welding fumes. Subway tunnels. Air-conditioning filter - Others Ventilation systems in factories. smoke in shops etc. | Equipment |
| 1534 | Total Nitrogen & Total Phosphorus Auto Analyzer | TNP 4000 | Humas Co., Ltd. | http://www.humas.co.kr | 1. Outline - Total Nitrogen(T-N) & Total Phosphorus(T-P) auto analyzer analyzes simultaneous analysis of both total Nitrogen(T-N) and total Phosphorus(T-P) within 1 hour. It has various application scope and special heating decomposition tank. TMS connection and various output signal are available. 2. Introduction 3. Character - Automation of water official test method. - Output data as same as wet analysis by automation of analysis process on the basis of an official test method. - Measurement of low concentration samples available by using a high precision metering pump. - Simultaneous analysis of both total Nitrogen(T-N) and total Phosphorus(T-P) within 1 hour. - Various application scope. - Special heating decomposition tank. - TMS connection and various output signal available. - Simple structure. - Minimize the quantity of samples/reagents used. 4. Application - Total Nitrogen(T-N) & Total Phosphorus(T-P) auto analyzer. |
Instrument & Chemicals |
| 1535 | Toxic gas detection | ACM 100 | Honeywell Analytics Co., Ltd | http://www.honeywellanalytics.co.kr | 1. Outline - This device analyzes a wide range of organic chemical components using Fourier Transform InfraRed(FT-IR) technology. It uses Infrared fingerprint for accurate monitoring of each gas type without any interference of other gases 2. Introduction 3. Characteristics - Monitors a broad range of chemicals - Able to detect up to 15 gas types from one monitoring point - Able to monitor up to 40 points - Able to add new gases on the list - Do not need modification - Do not need additional consumables - Able to monitor unidentified chemicals - Sample monitoring points: 10. 20. 30. 40 4. Application - Hazardous material producing sites - Workplace resting area - Chemical storage rooms - Exhaust ducts - Gas cabinets |
Technology & Process |
| 1536 | Toxic gas detector using smart sensor | Satellite XT | Honeywell Analytics Co., Ltd | http://www.honeywellanalytics.co.kr | 1. Outline - It is electrochemical toxic gas detector to monitor gases at potential gas leakage points. It is flexible and convenient product using the smallest and the most reliable electrochemical sensors. 2. Introduction 3. Characteristics - Fast and accurate gas monitoring - Use smart sensors - Do not need modification - Provide various signal outputs - Save maintenance costs 4. Application - Chemical storage rooms - Exhaust ducts - Gas cabinets - Vacuum pump rooms - Emergency response teams - R&D laboratories |
Equipment |
| 1537 | Tracer IR | SUNDOO Electronics Co. | http://sdtron.co.kr/english | Gas leakage testing equipment for vehicles is an equipment for testing leakage of gas from pipes while travelling on wide range of roads that are difficult to test on foot. Tracer IR is light and slim by adopting all-in-one hard case type. and detects even small amount of gas leakage with quick response time of less than 3 seconds and suction rate about 35 ℓ/min. Tracer IR detects gas leakage by using next generation type IR Optical Method. and can monitor. save and output data in real time by synchronizing with a notebook - Testing leakage of gas from layed pipes while driving on road - Hydrogen is not needed by using infrared optical system - Minimizes reaction to other hydrocarbon type gas. reacts to methane - Loading real-time data by synchronizing with a notebook | Equipment | |
| 1538 | Traveling rapid gravis filter | Traveling rapid gravis filter | DI Enviro Co., Ltd. | http://www.di-eng.co.kr | 1. Outline - Continuous filtering is possible even during backwash. facility is simple since additional facility such as support and cell divider. and is an excellent facility that complements the weaknesses of existing porous plate underdrain 2. Introduction 3. Characteristics - Excellent durability due to the simple structure and high intensity corrosion resistant material - Operation and maintenance/management are easy (various pumps. motors. bearings) - No clogging due to complete automatic operation - Easy installation according to site - Due to high performance filtering. SS is excellently removed in third filtering - Seal is structurally unnecessary. and cell divider is not needed 4. Application - Gravis filtering in water treatment |
Equipment |
| 1539 | Treated water supply system | Treated water supply system | Aquacell Co, Ltd. | Aqua4122@paran.com | 1. Outline - This system was developed to use treated water discharged from a sewage & wastewater treatment process by adopting Aquacell media that are excellent in removing low concentration organic matters and SS in water. The facility expense and operational cost of this system are lower than other systems. This system enables a water entering treated water system to be used as treated water supply a hundred percent. This system is more compact and economical than a bio-film process by using an aqua cell media which has a big specific surface area and good adhesion of microorganisms in the treated water supply system. 2. Introduction 3. Characteristics - The facility expense and operational cost of this system are lower than other systems. - Miniaturization of equipment is possible due to high removal of organic matters and SS by using an aquacell media which has a big specific surface area and ss filtration. - Normal operation time can be moved up as high speed of attachment by microorganisms at an early stage. - It is easy to attach and detach microorganisms due to low backwash water. - In the case of backwash. only surplus microorganisms are detached and basal microorganisms due to good adhesion of microorganisms by an aquacell media which makes it possible to be operated stably after backwash. 4. Application - Use of treated water as treated water supply |
Technology & Process |
| 1540 | Treatment Device for Adulteration | Treatment Device for Adulteration | Vinna Macro Co., Ltd. | 1. Outline • It is a specialized unit for the disposal of adulteration contained in the oily wastewater from food processing plants. • It does not require backwashing. 2. Introduction 14Biz-73.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-73.JPG'>3. Character • The backwash process is not necessary because it does not cause clogging. • Has a stable treatment performance and a great adulteration transporting ability • Easy to operate and maintain • Energy saving 4. Application • Food processing facilities that handle oily products • Food distribution centers • Wastewater from fish and shellfish washing • Wastewater treatment • Crusher • Wash and dehydration system in recycling plants • Thickener and dehydrator |
Eco-Friendly Products | |
| 1541 | Treatment facility for dioxin | Treatment facility for dioxin | Samyoung Plant Co., Ltd. | http://www.syplant.co.kr | 1. Outline - It uses the activated carbon to remove and absorb the dioxin and heavy metals in the combusted gases and the powder of used activated carbon absorbs and removes the dioxin on the surface of filtering cloth of dust collector. - The activated carbon can absorb and remove the harmful materials such as dioxin. mercury and VOCs in the emission gas because it has large specific surface area and excellent absorption features. 2. Introduction 3. Characteristics - It can secure the concentration of discharged dioxin by 0.1ng~TEQ/Nm3. - The removal efficiency of dioxin is raised as the contacting time of the activated carbon and harmful gas becomes longer. 4. Application - Industrial boiler - Incinerating plant of industrial wastes - Chemical plant - Incinerating plant of household wastes - Power generation plant - Steel-manufacturing plant - Cement plant |
Equipment |
| 1542 | Treatment facility for non-point pollution | Treatment facility for non-point pollution | Miracle Water Co., Ltd. | http://www.miracle-water.co.kr | 1. Outline - It removes the pollutants by passing the initial rainwater through the filtering tank filled with Miracle Stone. - It is an environment-friendly facility because it is gravity and powerless type. - It has high usage efficiency of area because it can use the top part as vegetation area. - Miracle Stone has a large pore (65 - 80%) so it has good capacity to discharge and treat water. - It is available to remove the nutrients (N. P) by plants of vegetation layer. - It is easy to maintain. (No additional maintenance) 2. Introduction 3. Characteristics - High treatment speed and efficiency (TSS more than 80% and BOD 40%). - It has high area usage efficiency because it uses the top area as vegetation layer or gardening and it is available to remove the nutrients. - Maintenance is not needed. - No energy consumption. - The media is permanent. - It is environment-friendly because it is used as permeative type. 4. Application - Sewage treatment plant - Tap water treatment plant - Rivers |
Equipment |
| 1543 | Treatment for the process water in Paper-mill factory | Seshinclean Co., Ltd. | http://www.seshinclean.co.kr | 1. Outline - Improves the quality of papers by treating organic and non organic matters in the process water. produces bio gas and save the operating expense and safe operation 2. Introduction 3. Characteristics - Improves the quality of paper by make the water clean in the process of manufacturing papers and removes COD. BOD. calcium hardness and a sulphate - Produces steam from bio energy and save the energy - Less waste water treatment expense (treating waste. electricity. chemicals. man force expenses) - Improves the waste water treatment ability 4. Application - Produce Corrugated Base Paper and pulp |
Technology & Process | |
| 1544 | Treatment of foul smell and VOCs | Foul smell and VOCs treatment system using Bio Filter | Environment and Life Co., Ltd. | http://www.envita.co.kr/ | 1. Outline In this system. a reactor is filled with charging materials. which has microorganism film. Pollutant materials are diffused to the microorganism film while foul smell and volatile organic composite pass the charging materials. and then. the foul smell and volatile organic composite are decomposed by mechanism oxidizing and decomposing by microorganisms. 2. Introduction Biological treatment method of gas phase pollutant materials is to use decomposition of microorganisms. The biological treatment method is a technology suitable for high flux gas of a low concentration. Pollutant materials are absorbed into a bio-film of carrier. and the absorbed pollutant materials are attacked and decomposed by microorganisms. The decomposition of microorganisms converts the pollutant materials into carbon dioxide. water and organic biomass by oxidation or reduction reaction. The gas phase pollutant materials. which are organic or inorganic materials. are used as energy source or carbon source necessary to grow microorganisms. The microorganism group. which consists of one dominant space or various species in case of decomposing special materials. causes a synergy effect to decompose the pollutant materials. VOCs and air (O₂) are diffused to biofilm while passing microorganism carrier layer on which microorganisms are adhered. and at this time. VOCs are decomposed into water and carbon dioxide by the microorganisms. The microorganisms use VOCs as carbon source. which is energy source of microorganisms. and nitrogen to proliferation of cells. So. finally. VOCs are used as food for microorganisms and removed. 3. Characteristics (1) Simultaneous removal of foul smell and VOCs (2) Maintenance of treatment efficiency without regard to concentration (3) Short reaction time and minimization of pressure loss (4) Excellent durability and minimized installation costs (5) Reduction of installation area due to a closed-type manufacture (6) It does not cause second pollution. (7) Reduction of maintenance rate and replacement rate due to a wide surface area of carrier 4. Application (1) Place where specific foul smell and VOCs are generated (2) Sewage treatment plants. excretion treatment plants. and foul water treatment plants (3) Garbage room and waste filled-up-land (4) Paper-manufactories. and food manufactories | Equipment |
| 1545 | CBCR PROCESS | CBCR PROCESS | CIBIO TECH CO., LTD. | http://cibio.com | 1. Outline CBCR(Cibio Biological Coating Removal) process can achieve simultaneous nitrogen and phosphorus removal only with aerobic and anaerobic tank needless to the application of anoxic tank and internal return. In detail the maximization of nitrogen and organic compounds removal performance by microorganisms can be accomplished by the application of CIMEN-DOC. contact media. coated by mutation microorganisms especially cultured to the treatment stream. 2. Introduction This process has an aerobic and anaerobic biological reaction tanks. In the aerobic tank is installed the microbial contact material. CIMEN-DOC. where specially cultured modified microbes are fixed. Phosphorus in the sewage is emitted from the anaerobic-anaerobic tanks due to excessive uptake of phosphorus by microbes while nitrification occurs in the aerobic tank. In the filtering media is developed sufficient anoxic zone. Nitrogen is decomposited in the CIMEN-DOC by nitrification and fixation of de-nitrifying microbes under long sludge retention time(SRT). 3. Characteristics - The nitrogen removal rate is high by utilizing adsorbed microbes through coating of the nitrogen-modified microbes in the CIMEN-DOC. - This process consists of only aerobic and anaerobic tanks without the need of complicated modification of existing structures. - Adsorption and growth of microbes is very fast. High concentration of MLSS can be maintained due to great amount of microbes adsorbed and special housing structure. - The process operation is easy. - Power cost can be saved to a great degree without the need of internal return for de-nitrification. 4. Application - Advanced Sewage Treatment Plant - Sewage( Wastewater) treatment plant - Ammonia load of high concentration Livestock wastewater - Niight soil treatment plant |
Technology & Process |
| 1546 | Tree Box Filter (TBF) | Tree Box Filter (TBF) | SHINGANG HI-TECH CO., LTD | http://www.sgenv.kr/ | 1. Outline Eco-Tree box Filter has been developed as part of the aquatic ecosystem restoration project (Eco-Star Project) by the Ministry of Environment. The technology is not artificial but nature-friendly. and economical and eco-friendly as it uses existing flower beds and newly-built flower bed areas. It is highly efficient in treating dissolved organic matters (BOD. TN. TP). 2. Introduction 3. Characteristics - Weir inlet is installed on the sidewall of the tree box which is contacting the roadside while being exposed on the road - Drainage layer. first filtration layer (geo net). second filtration layer. and vegetation soil are heaped from the bottom of the tree box. - Woodchips are installed beside vegetation soil in order to primarily filter nonpoint pollution sources flowing into weir inlet - Perforated pipes are installed on the drainage layer in order to drain treated water filtered in the filtration layer 4. Application - Nonpoint pollution source reduction facility |
Technology & Process |
| 1547 | Trenchless Repair | Trenchless Repair | Arok ENG Co., Ltd. | http://www.arokeng.co.kr | 1. Outline - This trenchless repair technique is to repair deteriorated pipelines and to form new composite pipes by inserting reinforcing tubes into pipes without excavation using a trenchless pipeline repair method in order to prevent leakage due to decrepit and burst of various buried water/sewage pipelines. 2. Introduction 3. Character - Excellent economic efficiency : Lower cost than the sewer pipe repair work with applying a temporary facility and deep excavation. - Remarkable constructability : No excavation procedure and time-saving method due to short construction period (It takes about 1~2 days per construction.) - Outstanding durability : Extend life of Cured In Place Pipe(CIPP) to 50 years by installment into the sewer pipes. - Eco-friendliness : Secure watertightness in order to prevent soil/ground water pollution by effluent water. 4. Application - M.S.H.S method. A-HLS method. ABL method. CSU method. ALPS method and Patent application method. |
Technology & Process |
| 1548 | TS vapor concentration device from waste water | Dongyang Electro-systems Co.,Ltd. | http://www.ando.co.kr/ | 1. Outline Pollution by waste water becomes serious problem as industries develop. Our company has researched for many years and developed latest style vapor concentration device from waste water. - Reducing vapor concentration from waste water - Using thickening agent of strong corrosive liquid - Concentrating vapor of highly viscosity liquid - Crystallization of salt liquid - Fertilizing and fermentation of organic matters - Feeding and fermentation of organic matters 2. Introduction 3. Characteristics - High efficiency with triple utility can method - Electric heater. No need for external heat - Liquid-cooled method - Install one package with triple utility can 4. Application - Reducing waste liquid: reduce the expense for treating waste liquid - Concentrate hazardous waste |
Equipment | |
| 1549 | Tube Conditioner & Cleaner | ATC-1200 | ACEN Co., Ltd. | http://www.e-acen.com | 1. Specification - Dimension : W× H× D: 550 x 250 x 180 mm - Weight : Approx. 10 Kg - Used Electricity: 220VAC/ 900Watts - Usable Tube size: O.D. 1/4inch (6.35mm). Length 115mm ; O.D. over 6mm. Length Max 150mm - Temperature range: ambient +5 ℃ - 999 ℃ - Flow range: 30~180 mL/min - Heating & Cooling time: 999 min 2. Introduction 3. Characteristics - Improves productivity since it can perform Conditioning / Cleaning of 12 Tubes at the same time - Low Cost & High Performance - Convenient control of Flow/Temperature of Tube. and Heating & Cooling time - Precision temperature control and speed control - Prevention of contamination of device itself through Self Purge function - When Gas line automatic off (Gas saving) Cleaning & Conditioning for reduction of Desorbtion gas is complete. the device cools the Tube with Robotic System - Uniform distribution of temperature over entire Tube by modulizing Heat block. easy to use exterior and elegant design - Aimed at user convenience by adopting 4-Line 20-Character display 4. Application - Tube Conditioner & Cleaner |
Equipment |
| 1550 | Wet ESP Project | Kunwoo Technology Environment Inc | www.clearnenergy7u.com | Features of Product - The corona electric discharge is actively generated by electric discharge wire and electric discharge needle like a fish bone. and then electric charge is sufficiently generated. - The structure of wire and pipe prevents from disconnection of electric discahrge poles and constantly keep high tension electric field. - It is easy to repair and maintain and the cost of maintenances is low. - The FRAME structure of electric discharge poles makes it stable. and the period of construction short. - Precipitation poles are structured as the plate or FRAME that maintain the stable status of collecting dusts. | Equipment | |
| 1551 | Tunnel Group Management System | TGMS | Nara Controls Inc. | www.naracontrols.co.kr | 1. Outline - Nara Controls Inc. provided tunnel integrated systems and tunnel group management systems for the first time in Korea. and developed and provided the tunnel environment instrumentation and control system via the technological innovation projects supported by the Ministry of Commerce. Industry and Energy. Nara Controls Inc. also provides the construction and maintenance services of the ventilation equipment. electric equipment and fire extinguishing equipments for tunnels as well as the integrated tunnel solutions for the design and construction of tunnel control facilities. 2. Introduction 3. Character *Tunnel Group Management System. - Integrated control equipment and facilities. - Remote control of multiple tunnels. - Link of traffic management facilities. - Optical transmission equipment and Network. *Individual tunnel system. - Ventilation instrumentation equipment. - Electric lighting surveillance and control. - Tunnel automatic fire detection equipment. - EMS/FMS 4. Application - Tunnel Management System |
Equipment |
| 1552 | Turbidimeter | 966-01 | KINE INDUSTRY | http://www.e-kine.com | 1. Outline - This turbidimeter can measure transparency and turbidity of all kinds of liquids as it can analyze O-20. O-200. O-1000NTU and 0.01NTU. The turbidimeter is used to measure turbidity of cosmetics. medicines. paper industry. purification plants. industrial wastewater. potable water. lakes. rivers and streams. etc. 2. Introduction 3. Characteristics - A direct reading function and a digital screen - Range of analysis : 0-20. 0-200. 0-1.000 NTU. 0.01 NTU - Mixing and diluting are not required - Measuring transparency and turbidity of all forms of liquids is possible - Reliable measured values 4. Application - Purification plant - Industrial wastewater - Effluents |
Equipment |
| 1553 | Turbidimeter | CUBE-TU1000 | DaAll ENG Co., Ltd. | http://www.daalleng.kr | 1. Outline - Turbidimeter 2. Introduction -Measurement method: 90-degree scatter Nephelometric -Measurement range: Autorange. 0 ~ 4 / 40 / 400 / 4000NTU -Resolution: 0.0001NTU -Accuracy: ±2%. ±5% 3. Character - Minimizing consumable parts and simple maintenance. - No replacement of measurement light sources for 10 years - High accuracy and excellent reproducibility. 4. Application - Laboratory and continuous monitoring field. - Water and sewage systems.. purification plants. industrial water. water for living. Food manufacturing laboratories. |
Equipment |
| 1554 | Turbidity Control Filter | Hong-in Co., Ltd. | http://www.hong-in.co.kr | 1. Outline • The large and coarse particles contained in the source water are initially filtrated by passing through the thick and light filtration layer. which is located at the upper part of the unit. Consecutively. the smaller particles are filtrated as they move down toward the bottom of the unit and pass through the next filtration layers. After being filtrated by the last filtration layer. which is thin and heavy. the water will only contain very small particles (smaller than 10 microns). 2. Introduction 14Biz-94.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-94.JPG'>3. Character • It is a new type of filter. which can substitute for existing clarifiers. used to control the high concentration of turbidity. • This pressure filter tank efficiently and rapidly mixes chemicals. It also flocculates and settles all the impurities. • The unit works effectively. regardless of the difference in daily temperature. The water quality does not change after the chemicals are injected. 4. Application • Drinking water manufacturing system • Treatment of surface water. river water. and reservoir water • Pretreatment water filter for waterworks • Pretreatment water filter for industrial water treatment • Pretreatment water filter for reverse osmosis systems |
Equipment | |
| 1555 | Turbidity Filter | Turbidity Filter | DONGHWA WATER TREATMENT & EQUIPMEMNT Co., Ltd. | http://dhwater.net/ | 1. Outline - DONHHWA WATER TERATMETN & EQUIPMENT’s turbidity filter features a pressure-type filtering method and excels in removing turbid ingredients (floating substances) contained in protozoan. 2. Introduction 3. Characteristics - The filtering device features three or four-layered filter media with different width - While the upper side features a light-weight small filter media. the low side features a heavy-weight and thick filter media. In doing so. the device filters impurities by size across the filtering layer. - The device excels in producing clean water with about 20 MICRON. including minute impurities. 4. Application - Filtering device |
Equipment |
| 1556 | Turbine Flow Meter KIF for Liquids | Turbine Flow Meter KIF for Liquids | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline - This turbine flow meter is very simple in structure. small-sized and light so that its handling is convenient. As for measurement target fluids. low viscosity liquids and any gas without impurities can be measured. so this flow meter is applied to a variety of industries including petro chemistry. chemistry. environment. food and beverage and so on. 2. Feature - This Turbine Flow Meter comes in various models depending on the degree of precision or the structure of turbines. - The size of this flow meter ranges from 15mm to 250mm so that they come in a wide collection of choices. - The main purpose of use for this Turbine Flow Meter is the measurement of low viscosity liquids and fluids mainly used are varied including fuels like gasoline from petrochemical products. water. food and beverage. - The degree of precision is 1% and 0.5%. - The reproducibility is 0.1% and 0.05%. - This product employs various fastening methods including NPT. Flange and Wafer. 3. Introduction 4. Application - Turbine Flow Meter KIF for liquids |
Equipment |
| 1557 | Turbine Flowmeter | FT210 | FnS Plus Co., Ltd. | http://www.fnsplus.com | 1. Outline - This turbine flowmeter has a function to measure flow rates (FLOW RATE). total flow rates (RESETTABLE). and accumulated total flow rates (Acc. Total) by receiving various signals for measuring fluid flowing through the pipes. Various kinds of pulse signals can be detected. depending on the kinds of the flow rate measuring sensors. 2. Introduction Display: 12*2 characters LCD back light Transducer supply: 12VDC 50mA. 24VDC 50mA Operating Temperature: 0 to 50℃ K- factor Range: 0.0100 to 999.999 Resolution: 12-bit Maximum Load: 55 ohms internally powered 4. Application - Flow meter |
Equipment |
| 1558 | Turbine Hot Water Meter | Turbine Hot Water Meter | Wizit Dongdo Co., Ltd. | http://www.dongdolighting.com/ | 1. Outline - The Turbine Hot Water Meter by Wizit Dongdo Co.. Ltd. eliminates the problem of water-proof and humidity through a sealed display part. Also this Hot Water Meter has a high degree of precision through a symmetric error correction method. 2. Introduction 3. Characteristics - Elimination of the problems of water-proof and humidity through a sealed display part (IP68). - Inner casing: compatible by size. - High degree of precision through a symmetric error correction method - Increased durability by maintaining a high-overload performance - Installation of up to 3 pulse generators without breaking a seal - Used under high temperature of 130 ℃ and pressure of 16 bars 4. Application - Hot Water Meter |
Equipment |
| 1559 | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline - A turbine flow meter is very simple in structure. small-sized and light so that it is convenient for handling. As for measurement target fluids. a low viscosity liquid and any gas without impurities can be measured. so this flow meter is applied to a variety of industries including petro chemistry. chemistry. environment. food and beverage and so on. 2. Introduction 3. Characteristics - These sensors are strongly manufactured so that they are proper for rough industrial sites. - The inside of these sensors is completely sealed so that the sensors feature a structure which has a high tolerance for humidity or dust particles. - These sensors can be used in a temperature range of 450℉~450 ℉. 4. Application - Turbine Pickup Sensor |
Equipment | ||
| 1560 | Turbo Blower | Turbo Blower | D.I tech | http://www.ditec.co.kr/ | 1. Outline • This energy-saving and high-efficiency turbo blower does not need a gearbox or a lubricant system as it uses a high-speed motor and applies air bearing. • It saves on energy costs by up to 30% or more because of its higher efficiency compared to existing blowers. It significantly reduces noise and vibration. which results to greater work efficiency. 2. Introduction 14Biz-82.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-82.JPG'>3. Character • Energy Conservation - The neuro turbo blower developed using an advanced design technology guarantees the best efficiency among similar products. - Replacement of your existing roots blower with the NX series can let you save on operational costs by about 30–50%. • Low Noise and Vibration - The noise level at 1 m of the front inlet is very low; that is. less than 80 dB; even without installing a separate silencer because of its unique air path design and the application of air bearing. It also minimizes the vacuum level. • Reliability and Easy Installation - The reliability of the product is secured through the high-temperature and vibration environment test. spin test on the impeller. and bearing durability test. - Product installation in a small space is possible because of its compact size. • Maintenance - Supplying or changing the lubricant is not required as applying air bearing would not require the use of a lubricant. - It is required to replace the inlet air filter when needed. • Air Cooling - No separate cooling fan or coolant is required as it is designed with a motor to naturally cool down air inhaled from a blower. - The unique cooling method designed by Neuros’ advanced technology prevents unnecessary power loss. contributing to the efficiency improvement of the product. - No ambient temperature increase occurs as it does not emit air used in motor cooling to the outside; there is also no effect on the performance of other equipment 4. Applications • Air blower • Construction site • Air pollution treatment |
Eco-Friendly Products |
| 1561 | TURBO BLOWER | REENTEC ENG | Turbo blower is the system for producing compressed air. The impeller of turbo blower is connected directly to permanent magnet synchronous motor(PMSM) which is driven by inverter. Technology of air bearing. impeller. high-speed motor. inverter. controller. and cooling system is applied. FEATURE 20%~40% energy-saving effect Initial investment can be recovered in 2-3 years Mechanical loss is minimized by direct connection 85dB low noise and no vibration It only needs replacement of suction filter periodically Convenient customer interface Automatic operation mode It is possible to check the error automatically and modify it Installation time is minimized APPLICATION Sewage. wastewater. manure sludge drying Sewage. wastewater aeration. incinerator. sanitaty treatment plant aeration tank. water catchment. advanced wastewater treatment Raw food feed Grain feed and drying Aquaculture oxygen supply Powder material feed Spray compressed air supply Small drying line | Equipment | ||
| 1562 | Turbo Blower | Turbo Blower | BKT | info@bkt21.co.kr | Turbo Blower (BKTurbo) BKTurbo is a clean air generating turbo blower that ensures superior energy efficiency and performance. This revolutionary technology is developed from our extensive operating experience in over 100 Wastewater Treatment Plants (WWTP) worldwide. BKTurbo can provide a quick return on your investment by saving energy costs. Through the mitigation of carbon emissions. the blower helps sustain the natural environment. BKTurbo also contributes to a better working environment thanks to its oil-less operation and low noise levels. Blower systems account for more than 50 percent of a treatment facility's total energy usage. Waste & Wastewater treatment facilities spend 20% of the total electricity in California. They account for more than $500 Million total energy cost each year. Through the use of ENERGY-EFFICIENT EQUIPMENT. like turbo blower. energy concumption for these facilities can be reduced by 30%. (Southern California Edison. Empower Savings Business Foresight. Second Edition. June 2010.) Key Components AIR FOIL BEARING Since 2000. the air foil system has proven itself to be the most efficient and clean solution for high speed motor systems in heavy machinery. Today. air bearing is recognized as the best solution for high-efficiency and high-speed motor systems. The BKTurbo’s 100% oil-less air foil bearing system can supply pure air without mechanical friction. noise. or excess vibration. IMPELLER The BKTurbo uses a unique aluminum alloy. tooled with 0.001mm precise machining. to guarantee high compression efficiency and reliability in all applications. The impeller’s surface finish and hard anodizing coating enables it to maintain consistent quality and efficiency by resisting humidity and chemical exposure. Furthermore. the impeller’s light weight also prolongs the durability of the air foil bearing. HIGH SPEED MOTOR The BKTurbo motor is 95% more efficient than conventional AC motors. Specifically designed to avoid overheating in high-speed conditions. the BKTurbo’s PM motor is easily capable of continuous 35.000-hour runtimes by using a double cooling structure to maximize cooling efficiency. Cooling the outside of the stator first. the motor then cools the outside foil bearing. winding. and rotor. Both ends of the cooling structure reduces stress on and increases the durability of the air foil bearing. Applied to all our products. this powerful cooling mechanism removes the need to install secondary or extra cooling systems. such as fans. inverters. and sine filters. | Equipment |
| 1563 | Turbo Blower Technology | Taejin Eng | http://valentineengineers.com/ | BENEFITS TO YOUR WASTEWATER TREATMENT PLANT (WWTP): 40% REDUCTION in energy costs NO noise SMALL footprint MINIMAL Maintenance The typical WWTP uses 40% of its overall energy consumption in its aeration process. Positive displacement or multistage centrifugal blowers are two technologies that are utilized for process aeration. These technologies. while proven. are energy intensive. These technologies are also noise and maintenance intensive. Valentine Environmental Engineers designed the expansion and upgrades to the EPCOR Wishing Well Water Reclamation Facility. The facility was equipped with a small blower room and conventional blower technology. The WRF aeration capacity was being doubled but the available space did not increase. The new conventional blowers to meet the increased capacity could not fit in the building. exceeded available electrical supply and would require HVAC modifications to the building to evacuate the additional heat load from the new. larger conventional blowers. Valentine and EPCOR investigated the problem from all angles and the challenges presented to determine the best use of space and more modern technology. Case Study: EPCOR Wishing Well WRF The Solution The dawn of the Turbo Blower Technology has revolutionized the process air blower supply for WWTPs. Turbo blowers are not only quiet and require a small footprint. they are more efficient than conventional blowers and offer greater turndown capabilities. Turbo blower technology has its roots from the aviation and aerospace industry. This technology relies on an air foil bearing supported on a shaft that is directly integrated with the variable frequency drive. motor and control system in a single enclosure. The air foil bearing eliminates friction between the bearing and the shaft and thus improves the efficiency of the blower while allowing 40% turndown capability. Success with the Turbo Blower Technology Valentine and EPCOR investigated the Turbo Blower Technology to resolve all of the project issues: Ability to install turbo blowers in existing space without having to expand the building No requirement for additional electrical power due to the efficiency of the units and requires less installed hp overall No HVAC retrofits required as blowers produce virtually no heat and can function at temperatures of 120 F The blowers reduced overall construction and operations costs. Turbo Blower Technology is significantly more efficient than conventional blowers. You will save on energy costs. decrease noise. reduce your footprint and reduce your maintenance costs with newer methods. Other turbo blower retrofits that Valentine Environmental Engineers designed: Corrections Corporation of America Eloy Detention Center – three new 50 hp blowers City of Scottsdale Gainey Ranch – replacing three existing 75 hp blowers with three new 50 hp turbo blowers. 6.7 year payback. $50.000 annual energy savings City of Scottsdale Water Campus – replacing two existing 400 hp blowers with three new 250 hp blowers. 3.4 year payback. $200.000 annual energy savings Other projects in the design phase for City of Tempe and City of Peoria | Technology & Process | |
| 1564 | Turbo Blower(TB-Series) | Wooyang ENG Co, LTD | Designed in direct connection. Supply standard products of 1HP~15HP. roduced up to 12 ∼130 ㎥/min (60Hz) and the flow velocity of high pressure is possible and the durability is excellent. The structure of impeller is strong and there is no overload regarding hydrodynamic. It is direct connection type and there is no trembling due to precise balancing by standard production until 550mmAq | Equipment | ||
| 1565 | Turbo Classifier | Dong Ah Development Industry | http://www.dong-ah.co.kr/ | 1. Outline • Turbo Classifier removes impurities after threshing and has a milling function. • It selects various grains (dried rice. barley. cut-dried sweet potatoes. corn. etc.). 2. Introduction 14Biz-480_Turbo_Classifier.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-480_Turbo_Classifier.jpg'>3. Characteristics • It selects 3–3.5tons (based on 20–mesh rice and barley) hourly. • The minimum selectable particle size is about 20–40 mesh. • The secondary grinding function helps enhance the uniformity of powder particles after the firstgrinding of powder. • It has a detachable screen and an enhanced clamp for easy maintenance. • It allows for the easy control of belt tension. 4. Application • Alcoholic products companies • Selection of various farming harvests • Selection after threshing • Agricultural machine rental businesses in rural areas |
Equipment | |
| 1566 | REENTEC ENG | The length of blade guid is long and the width is narrow. Straight line & curved-shaped structure. End of blade is bent upward in the direction of rotation. It is an equipment which is applicable to a wide range depending on design. 1. FEATURE At high speed driving. relatively quiet operation is available Strong structure for the high static pressure Air volume & static pressure can be selected Large variation of the static pressure due to airflow In multi-stage connection. pressure rising makes highstatic pressure High-strength. low-noise airfoil blades Capacity assurance by dedicated test program Ex-works after verification of best vibration condition 2. APPLICATION Industrial plant equipment : power plant. nuclear power plant. casting plant. coke Steel supply. cupola facility Pollution prevention equipment : incinerator plant. dust collector. cleaning equipment. water treatment equipment. various other general industrial equipment | Equipment | |||
| 1567 | Turbo Rotary Scrubber | Turbo Rotary Scrubber | Dongwon Environment Energy and Tech Co., Ltd. | http://www.dweet.co.kr | 1. Outline - TRS is a device to remove matters in particle state or in gas state through forceful mixture with lavation. diffusion. absorption and collision in phases. after absorbing exhaust gas by force. using specially designed spray nozzle. Venturi Fin. FRP impeller of turbo type and side wall plate with projections all embedded in the collector. 2. Feature - Excellent treatment efficiency for dust. SOx. HCl and odor - Life time is semi-permanent as the casing. impeller. etc. are totally made of FRP. - Construction cost is low as ID fan can be omitted depending on the site condition. - Maintenance is simple and maintenance cost is low as rotating bodies such as shaft. bearing. motor. etc. are mounted outside the water storage tank. - It is compact and installation is simple as the specification can be adjusted depending on the amount of exhaust. 3. Introduction 4. Application - Treatment of dust and harmful gas generated by city waste incinerator - Treatment of dust and harmful gas generated by industrial waste incinerator - Treatment of dust and harmful gas generated by TDP (Thermal-Depolymerization Process) incinerator - Treatment of dust and harmful gas generated by boiler - Treatment of metal dust and harmful gas generated by steel manufacturing and casting factory - Treatment of odor substances of facilities generating odor - Other industrial facilities discharging dust. harmful gas or odor |
Equipment |
| 1568 | TURBODRUM | TURBODRUM | Taejin Eng | www.taejineng.co.kr | TurboDrum IH horizontal drum screen is a unique. rotary. in-channel drum screen suitable for fine screening of sewage and industrial effluent. It is the ideal solution for large applications requiring fine screens with openings as fine as 1 mm and no carryover. This equipment is available in a wide range of hydraulic and separation capacities to allow customizing for the most effective solution for your application. PRODUCT HIGHLIGHTS OF THE TURBODRUM IH HORIZONTAL DRUM SCREEN: 304 or 316 stainless steel 1mm to 5mm wedgewire or perforated plate Can handle up to 80 MGD (3.5 m3/s) Larger screen field area than conventional for in-channel drum screen Horizontal drum screen No carry-over Integrated screw conveyor/compactor No mechanical serviceable parts in effluent process stream | Technology & Process |
| 1569 | Turbo-Fan Specially Designed For High Efficiency | Turbo-Fan Specially Designed For High Efficiency | Wooyangeng Co., Ltd | http://www.wooyangeng.co.kr/ | Product Description DUSCOL BF-Series. Realization of increase in suction power by 10% with same motor capacity and of low noise by specially designed Turbo-fan. Realization of low noise design . Powerful but quiet auto vibration function effectively and quickly shakes dust.(MA-Type) Product Feature Turbo-Fan Specially Designed for High Efficiency The same motor capacity was designed increase of inlet air flower 10% and low noise by high effectiveness Turbo-fan. Motorized Auto-Shaking System(MA Type) Stamp the dust effectively in a short time by powerful and quiet auto vibration function. Monitor Displays the Dust accumulated in filter. Analog manometer indicates operational status and dust accumulation. warns user of abnormal shaking and indicates when to change. easy Bag Filter Exchange Easy to change with simplified integral type of bag filter Wider Choice of Options Wider choice options and availability as per needs(Hooper. Rotary valve. Flexible Arms... etc) | Equipment |
| 1570 | Twist Screen | Twist Screen | Hankook P.M Eng Co., Ltd | http://www.topcrusher.co.kr | 1. Outline - Twist Screen 2. Introduction 3. Characteristics - Suitable for sorting materials such as Polymer and corpuscle - Great sorting capacity - Maximized sorting using cleaning device to prevent clogging. - Easy maintenance and filter change - No additional installation necessary thanks to dust protection design 4. Application - Powder. pharmacy. food industry. sand gravel. ceramic. chemical. sugar & syrup. pulp & paper |
Equipment |
| 1571 | Type Food Electromagnetic Flow Meter | KYONGIN INSTRUMENT & SYSTEM CO.,LTD | http://www.kiflow.co.kr/ | 1. Outline This electromagnetic flow meter is a device applying Faradays law of electromagnetic induction which is a principle of measuring electromotive force generated when a fluid flows in a magnetic field. This flow meter can measure a variety of fluids ranging from general top water. food and beverage. waste water to sludge regardless of temperature. density and pressure of liquids with minimum conductivity of more than 0.5㎲/cm. 2. Introduction 3. Characteristics - The Type Food Electromagnetic Flow Meter is for food hygiene and is applicable to the pipes with a size ranging from minimum 10mm to 100mm. -Outer material is stainless steel while inner material is Teflon. being applicable to a variety of food industries. - This product has a use range of approximately 330:1. - Especially. the product’s degree of precision is very high as it amounts to 0.25% of an instantaneous value. 4. Application Type Food Electromagnetic Flow Meter |
Equipment | |
| 1572 | U.M.S technology | U.M.S technology | UniECO Co., Ltd. | http://www.uni-eco.co.kr | 1. Outline - U.M.S. or Unieco Micro-Filter System Process is an advanced treatment system that sterilizes and deodorizes microorganisms. bacteria and alien substances by using an A.O.P technology that oxidizes those microorganisms. bacteria and alien substances into ion molecules with high activity and that detaches and removes BOD. and TSS by using a U.M.F filter. 2. Introduction 3. Character - Low initial investment cost - Easy remodeling and repair - Overcoming limits that biological treatment has - Stable treated water quality - Easy maintenance 4. Application - Wastewater treatment plant |
Technology & Process |
| 1573 | UF membrane | UF membrane | CJK Alliance Co., Ltd. | http://www.water-terminal.co.kr | 1. Outline - UF membrane 2. Introduction  http://img.konetic.or.kr/apec-vc/xml/img/market_place/4.JPG'>3. Character - High technical skills based on a joint venture with a foreign enterprise. - Proven product that is used by lots of enterprises in the world - Various modules that a user can select - Possible to install based on the company’s technical prowess for UF filters. 4. Application - Membranes |
Equipment |
| 1574 | UF(Ultra Filteration) | UF(Ultra Filteration) | MEMB FLOW Co., Ltd. | http://www.membflow.com/ | 1. Outline - UF(Ultra Filteration) contains thousands or tens of thousands of aligned fiber filaments with a vacant space in pressure vessel and filters protozoan. bacteria. virus and high molecular substances according to a molecular size with the diameter of 0.01 to 0.001um and molecular weight of 10.000~100.000MWCO. 2. Introduction 3. Characteristics - Capable of creating scales on the emulsion side because it can expand the velocity of fluid movement. - Easy to wash due to a capability to apply various washing methods. - Easy to exchange membranes due to a simple module structure (Cost-effective membrane exchange). - Capable of applying liquids containing high-density suspended solids with small cavity filling and a large euro area. - Less likely to find high viscosity in treated water due to an extensive membrane area per unit and boasting proven performance in separating substances with fewer formations. - In case of a hollow fiber module. boasting the most extensive membrane surface area per unit due to high density of cavity filling. - While internal pressure enables high velocity of fluid movement using a small fluid volume thanks to a small membrane calibrator. it suffers great losses of pressure and is likely to undergo fluid blockage. - External pressure is used when suspended solid substance exists in protozoan. suspended solids are accumulated in the hollow fiber membrane. 4. Application - Replacement of activated carbon filters - Removal of multiple molecules persistent in groundwater - Pre-treatment of RO service water - Final filtration of supremely pure water - Separation of fermented broth |
Equipment |
| 1575 | ULPA Filter | ULPA Filter | CAMBRIDGEFILER Co., Ltd. | http://www.cambridgefilter.co.kr | 1. Outline - ULPA FILTER 2. Introduction Test criteria : 0.1um Laser Particle Counter Efficiency: 99.999% Over Scan Teste: Scan Tested 3. Character - Particle control of 0.1um. - Low pressure loss design in preparation for a high wind volume. - Realization of reduction of operating cost due to energy saving. 4. Application - ULPA Filter. |
Equipment |
| 1576 | ULPA Filter | ULPA Filter | Korea Airtech Co., Ltd. | http://www.koreaairtech.co.kr | 1. Outline - ULPA filter 2. Introduction 3. Character - High collection efficiency of 99.9999999 % at 0.05 μm - Applicable to the CLASS 1 of a semiconductor production process. etc. - Use of a corrosion-resistant AL frame 4. Application - Semiconductor manufacturing process |
Equipment |
| 1577 | ULPA Filter | KOREA AIRTECH CORPORATION | http://www.koreaairtech.co.kr | 1. Outline • An ultra–ULPA filter (separator type) 2. Introduction 14Biz-154.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-154.JPG'>3. Characteristics • High collection efficiency (99.9999999%. at 0.05 µm. 99.999999% at 0.1 µm) • Used in Class 1 clean room(for semiconductor manufacturer) • Corrosion-resistant aluminum frame 4. Application • Removal of harmful substances in the air and air purification |
Equipment | |
| 1578 | Ultra Filter | Ultra Filter | GHT Korea Co., Ltd. | http://www.ghtkorea.com | 1. Outline - Eliminate toxic substances or pollutants using a Ultra Filter. 2. Introduction 3. Character - Polypropylene does not leave toxic substance or residue in products when used in food or beverage production. - Polypropylene is chemically stable material which is resistant to acid. alkali and heat and has antibiotic characteristics. - The filtration mode designed as an external pressure type enables easy cleaning and high dirt resistance. - Inside of the fiber has a compact and high strength structure which is not easily broken. - The porous micro fiber with uniform density guarantees precise filtering and is strong to high flux and mud. - Porous pp fiber. external pressure mode 4. Application - Preparation process for pure water manufacturing. - Industrial wastewater treatment. - Food and beverage industry. - Fermentation industry. - Medical industry. |
Technology & Process |
| 1579 | Ultra Pure Water Manufacturing Plant | Ultra Pure Water Manufacturing Plant | Greenwell Co., Ltd. | http://www.greenwell.co.kr | 1. Outline • The base method for this plant is reverse osmosis (R/O) EDI process. • A two-step R/O EDI process is applied to obtain ultrapure water more stably. • C-PVC is used for the influent pipes; STS 3161. for the pipes of R/O high-pressure parts; and Clean-PVC. for the pipes from R/O permeable water to the de-ionizer. • For preprocessing. activated charcoal filtration and microfiltration are applied. • If the raw water is groundwater with a high harness level. water softener can be added for preprocessing. • During post-processing. the water passes through a degassing device and a UV disinfection device. and undergoes a post-filtration process. A sealed FRP tank is used for storage. • In the case of ultrapure water facilities for medicine manufacture. all the components must satisfy FDA standards; the measuring device must pass the qualification test and must obtain an official approval; and the connection pipes must be sanitary and can be disassembled. cleaned. and sterilized frequently. • The plant should be designed in thorough consideration of proper sanitation so that microorganisms cannot penetrate or reproduce. • All the manufacturing processes and test runs should be validated according to DQ. OQ. and PQ procedures to satisfy FDA standards. 2. Introduction 14Biz-47.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-47.JPG'>3. Character • Equipped with CIP of which sterilization performance is recognized • Ion exchange resins do not need to be changed because the plant is equipped with EDI and is of a semi-permanent polishing type • Integral monitoring and control of all operations is possible because it is equipped with a total display board • Has acquired the qualification of FDA-grade ultrapure water for the first time in Korea • Integral control–type digital control panel of R/O EDI • Antimicrobial pipes that are coated with silver-nano 4. Application • FDA-grade ultrapure water plant • Ultrapure water facility for semiconductor ceramic material manufacturing • Ultrapure water facility for extremely sensitive plating |
Technology & Process |
| 1580 | Ultra Pure Water System | Ultra Pure Water System | GNG Co., Ltd. | http://www.ourgng.co.kr/ | 1. Outline • This is a system that manufactures highly purified water that has about 17–18 M/cm of electrical resistivity and contains minimal to zero physical and chemical compounds and synthetic materials. 2. Introduction 14Biz-65.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-65.JPG'>3. Character • Removes ion components. particles. bacteria. microorganisms. and dissolved gas • Available for the production of ultrapure water with 0–18.3 M/cm of electrical resistivity 4. Application • Semiconductor field • Pharmaceutical and medical fields • Water for diluting and removing chemicals • Painting and plating industries • Food processing • Power plants • Boilers |
Equipment |
| 1581 | Ultra Pure Water System | Hyundai Wacor Tec. Co., Ltd. | Auto Controller Auto Flushing Function [SPECIFICATION] * Moder No. : HRZ-100 - Power : 220V / 60Hz - Size : 450W * 400L * 930H - G.Weight : 37kg - Storage tank : PE 50 LITERS with cock. [WATER FLOW PROCESS] [PRODUCT FEATURE] Auto Controller Equipped with fully automatic Auto Controller and Sensors. They can run and stop operation repeatedly by detecting inlet and outlet water pressure automatically when the Switch is on. (Possible to check the operation status by LED lamp) Auto Flushing Function It’s on Auto flushing for one minute every 2 hours based on the cumulative operating hours by auto controller. for draining stagnant waters in piping forcibly to prevent pollution inside piping. Emergency water supply function Possible to supply Pure water constantly by emergency water supply function in case of the water outage. 2- WAY water outlet Possible to supply each Pure water and Treated water separately by 2 way water outlet. Dual TDS Monitor Available to check the TDS of Feed Water and Pure water(treated water) in real time. Dual TDS Monitor automatically power off after 10minutes when no use of it to avoid unnecessary discharge of it. The qualified parts application for drinking water Application of the qualified non-toxic materials which were FDA. NSF certified | Energy | ||
| 1582 | Ultra Sand Filter | Ultra Sand Filter | FLOWTECH Co., Ltd. | http://www.flowtech21.co.kr | 1. Outline - As the problem of water pollution becomes critical and the necessity for efficient use of water resources and environmental protection is increased. there is a growing interest in a water treatment technology. A technology that effectively removes various impurities contained in treated water is needed in order to obtain water optimal for the purpose of use. Ultra Sand is an excellent filter system which can be widely used in various applications of water treatment and has great merits including large capacity filtration. accurate filtration. small backwashing and space-saving. 2. Introduction - Raw water which flows in to a filter through a filtered water circulation pump rotates in circumferential direction at a high velocity along the wall of the filter housing and at this moment heavy pollutants moves to the edges of the housing due to a powerful spiral flow which occurs on a filter media and then they are stored on the filter media in a floating condition. - Smaller and lighter pollutants are transported above the filter media and form a fine cake after they are compacted densely and water is separated from them and discharged cleanly. passing through the filter media compressed by a centrifugal force. - Backwashing automatically starts when the pressure of the inlet and outlet of the filter reaches a certain differential pressure set previously and clean water slowly flows in from the bottom of the housing at a fixed rate and cleans up the filter media by separating pollutants and transporting them toward a drain. 3. Character - Filtration of up to maximum 0.5um micro-particles. - Ingenious principle different from existing sand filters. - Maximization of a surface area with the use of spiral flow. - High filtration capacity and low backwashing flow rate due to surface filtration treatment. - Precise filtration through a fine cake. - Innovative scale reduction for a heat exchanger. a coil and a pipe. - Compact compared with existing sand filters. - Low circulation flow as precise filtration is possible. - Reduction of a housing diameter by expanding a filtration surface through spiral flow. - Reduction of filter media height with the use of a surface filtration technology. 4. Application - Applicable to cooling water/HVAC. - Use in industrial process water. - Applicable to DI/RO pre-treatment. - Drinking water. - Recycling of wastewater. - Swimming pools. |
Equipment |
| 1583 | Ultrafilter | Ultrafilter | WIT Inc. | http://www.waterit.kr | 1. Outline • Has a hollow fibrous form with a 0.1–0.001-µm gas pocket • Uses precision filtration (M/F) and reverse osmotic pressure (R/O) methods; has an outstanding function of removing particles or alga. colon bacilli. and germs. excluding ionic materials in solutions; and distinguishes. concentrates. and refines specific materials only from a mixture of high- and low-molecule substances through excellent fraction ability and penetrability 2. Introduction 14Biz-105.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-105.JPG'>3. Character • Fundamentals of the hollow fiber–type ultrafiltration membrane - When an undiluted solution supplied to the hollow fiber–type ultrafiltration membrane quickly passes through the membrane. high–molecular weight substances are excluded. concentrated. and circulated. and low–molecular weight substances penetrate it. - The hollow fiber–type ultrafiltration membrane is operated through the cross-flow filtration method with vertical permeability to the flow direction. Therefore. less pollution is generated on the surface of the membrane. It also has a high permeability of water and can maintain a stable flow. 4. Applications • Water and wastewater treatment fields • Reuse of wastewater produced by heavy water reactors of city buildings • Preprocessing or post-processing of the R/O membrane • Removal of microscopic particles and germs from DI water • Concentration treatment of the emulsified oil wastewater of cutting oil • Hide and pulp wastewater treatment • Electronics and surface treatment fields • Ultrapure manufacturing final filters • Refinement of electronic component cleaning water • Collection. reuse. and wastewater treatment of electroplating paint • Food and medicine. and the medical field • Collection of valid substances from all kinds of food wastewater • Removal of pyrogens from water and the raw materials of injections • Manufacture of aseptic water of operating rooms • Concentration and refinement of liquid seasonings and food ingredients |
Equipment |
| 1584 | Ultrafilter | Ultrafilter | GHT Korea Co., Ltd. | http://www.ghtkorea.com | 1. Outline • A filter that purifies water by being applied to the ultrapure water manufacturing preparation stage. industrial environment protection. the drinking water / food industry. the fermentation industry. the medical industry. and others 2. Introduction 3. Characteristics • Polypropylene does not generate toxicity or residue during the food and drinking water manufacturing process. • It is capable of acid resistance. alkali resistance. heat resistance. and antibiosis. and is chemically stable. • The filtration mode is designed as an external pressure type for easy cleaning and strength against contamination. • The internal structure of fiber is not easily broken. and it has a compact and high-strength structure. • Porous microfiber with uniform density has precise filtering and is strong against high flow rate and mud. 4. Application • Application to the ultrapure water manufacturing at the preparation stage • First industrial cleaning water • Preprocessing of ultrapure water manufacturing • Preprocessing of seawater desalination • Application to the final stage of ultrapure water manufacturing in the electronics industry • Application to industrial environment protection • Industrial wastewater treatment • Industrial and urban wastewater recycling • Application to the drinking water / food industry • Application to drinking water manufacturing. mineral water manufacturing. fruit juice breakdown and purification. wine refinement. protein removal. and the refined sugar industry • Application to the fermentation industry • Refinement. breakdown. and concentration of enzymes • Application to the medical industry • Water treatment for medicine • Medicine refinement and medicine breakdown in traditional oriental medicine preparation • Removal of the heat source of injection solvent and asepsis-purified water | Equipment |
| 1585 | Ultrafiltration method | SAF System | DUKJIN ENVIRONMENTAL and CONSTRUCTION CO., LTD. | http://www.dukjinec.com | 1. Outline SAF SYSTEM is a membrane separating system capable of effectively blocking a fouling phenomenon of a membrane by intermittent cleaning and of increasing safety in a long-term injection amount and treatment efficiency to remove fine materials of 0.01 ㎛ or more. by adopting an external-pressure total filtering type operation and a scrubbing air cleaning system. SAF SYSTEM can be applied to various high-graded water treatment processes as being very compact and performing automated operation and safe processing. 2. Introduction(See fig 1. Attach-1) <Fig 1. Heavy water system combined with biological treatment> 3. Characteristics (1) Stable purifying quality (2) Compact system (3) It can be used as a heavy water system by sing the existing systems (4) Automation using logic control (5) Inexpensive construction costs and operation costs 4. Application (1) Heavy water system combined with biological treatment (2) Water purification and treatment of industrial water (3) Third high-grade treatment of sewage and wastewater treatment process (4) Drinking water purification (5) Large-scaled water treatment for sterilization and purification | Technology & Process |
| 1586 | Ultrapure Water System | Ultrapure Water System | Huvis Water | www.huviswater.com | 1. Company Introduction Huvis Water Corporation was established in 1959 as a pioneer of water and wastewater treatment in Korea. and has become a completely integrated specialist of water and wastewater treatment. With its long experience and outstanding technological expertise. Huvis Water delivers a variety of municipal & industrial water treatment plants designed to meet the customer requirements. Huvis Water takes pride in its continuous investment not only in R&D. with the aim of developing leading technologies in the global water treatment markets. but also in recruiting and nurturing highly qualified experts. Huvis Water and its cutting-edge technological expertise are expanding out of the domestic market into the global arena. Huvis Water firmly promises to be the future of global water treatment technology. In 2016. Huvis Water has established Huvis Water Vietnam to expand its business area and provide the advanced technologies based on almost 60 years experiences. 2. Product Information Advantages of membrane systems: - Cost-effectiveness: Lower operation and maintenance cost - Easy installation: User-specific. site-specific system configuration and installation fully or partially shop assembled on skids or containers to minimize site work. - Reliable supply of consistent-quality water: No interruption for resin regeneration and consistent and predictable product water quality. - Minimal space requirement: Due to its compact design and shop assembly on skids or containers. installation area is minimized | Water Treatment |
| 1587 | Ultrasonic algae eliminator | ECO SONIC System | Ecogen Corp. | http://www.iecogen.co.kr | 1. Outline System to weaken adhesive property of algae and eliminate them within short time by generating ultrasonic cavitations combining various properties of ultrasonic energy 2. Introduction Algae are photosynthesis independent organism. displaying rapid growth under nutrition and sun light generating various problems. Adhesive algae grow from late spring to late autumn in the flirtation site settling pond. filtration paper and sewage/wastewater treatment site precipitation tank. not only degrading external look but also significantly lowing system performance. Out EcoSonic prohibit adhesion and growth of algae by using continuous ultrasonic from specific water zone. preventing occurrence lf algae but also elimination of it with reduced time and resource (See fig. 1). |
Equipment |
| 1588 | Ultrasonic bulking bacteria elimination System | Eco BR System | Ecogen Corp. | http://www.iecogen.co.kr | 1. Outline Eco BR system is bulking bacteria elimination system to eliminate bulking development. Method of operation is via ultrasonic based on the discovery that appropriate measure of ultrasonic application does not damage floc-generating microorganism but eliminate bulking bacteria. 2. Introduction Bulking development is the most difficult issue for active sludge method and its cause is still unknown. When bulking development occurs. partial method of improving precipitation ability is being performed such as introduction of anoxic tank. injection of sedimentation materials. salt disinfections injection and others. However. this method requires large amount of expense but resulting minimal effect. This is the reason behind our developing this system. Our system not only resolves the problem when applied to wastewater treatment site where sludge overflow occurs regularly with high SV by Entomopathogenic Fungi. Also it significantly reduce sludge occurrence by dehydration problem via Entomopathogenic Fungi 3. Characteristics (1) No damage for microorganism (2) Outstanding efficiency when applied to wastewater treatment site with high SV (3) Sludge occurrence is low 4. Application (1) Wastewater treatment site with high SV containing bulking bacteria (2) Wastewater treatment site where sludge overflow occurs by regular occurrence of bulking bacteria (3) Wastewater treatment site with extra sludge occurrence (4) Wastewater treatment site with high level of extra sludge moisture content due to bad dehydration system. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000255.jpg></center> | Equipment |
| 1589 | Ultrasonic Densitometer | DensiCheckTX | Modeun Environment Technology Co., Ltd. | www.met21.co.kr | 1. Outline DensiCheck TX is based on the sound velocity principle in measuring the concentration of liquids. Ultrasonic wave is transmitted through liquids and reflected to the source. The speed of transmission is measured by an improved rapid apparatus and the difference changes the liquid concentration into a signal through a no-board microprocessor. The temperature is automatically compensated by a built-in sensor. and the measured values are transmitted to an appropriate display or a host controller in an analogue or digital signal form. 2. Introduction 3. Characteristics - Binding a non-invasive process with an invasive process - No deviation and no recalibration - High accuracy and repeatability - Can be used in a dangerous area - Cut the costs of installation and maintenance - High stability - Improve process efficiency - Improve quality of monitoring - Quick recovering of investment money 4. Application - Measurement of concentration |
Equipment |
| 1590 | Ultrasonic Flow Meter | WTU 2000 | Wintec Co.,Ltd. | www.m-wintec.co.kr | 1. Outline - This Ultrasonic Flow Meter. also called as Sonic Flow Meter. is a flow meter which obtains an output in proportion to the fluid volume in a pipe by using a change in the propagation velocity of ultrasonic waves in the fluid according to flow velocity. After a piezoelectric effect was found in 1880. an ultrasonic vibration element was applied to detect reefs and icebergs for the first time during the voyage of a ship. When it comes to flow measurement using ultrasonic waves. a flow meter using anti-electromagnetic waves was introduced around 1920 and has been widely applied to industrial sites since 1970 thank to the technology development. 2. Introduction 3. Characteristics - Excellent Function and High-Precision Measurement - Simple and Convenient Installation of the Outer Wall of a Pipe - Two-Way Measurement of Flow Rate - Low Power Consumption - Self-Diagnostic Function - Fast Time Measurement Analysis - Key Arrangement of a Telephone Keypad for User Convenience - Input of Various Parameters 4. Application - Flow Rate Measurement |
Equipment |
| 1591 | Ultrasonic Flow Meter | Ultrasonic Flow Meter | Wizit Dongdo Co., Ltd. | http://www.dongdolighting.com/ | 1. Outline - The Ultrasonic Flow Meter by Wizit Dongdo Co.. Ltd. employs a measurement principle that sound waves moving in the direction of flow travels faster than sound waves moving against flow. The travel time TAB and TBA are directly proportional to an average flow velocity (VM) of liquid. A flow rate is a value measured by multiplying a sectional area of a tube size in which liquid passes with velocity. 2. Introduction 3. Characteristics - Application of a sealed display part (IP68). - Application of a longer life battery (10 years). - Low maintenance and management costs due to an absence of moving parts. - High degree of precision due to a wide flow rate measurement range of 500 times. - Support of various display types (leak detection. battery level. flow rate direction. alarm mode). - Support of various remote meter readings including PDA and RF. 4. Application - Ultrasonic Flow Meter |
Equipment |
| 1592 | Ultrasonic flow meter | DCD1438 | DAEJIN | www.kometer.kr | 1. Feature - Easy installation and use - Long-life - Reusable - LCD digital display 2. Application - Production process - Cooling water - Wastewater reusing 3. Function - Control and monitoring - Distribution - Leek detection | Equipment |
| 1593 | Ultrasonic flow meter for controlling the process of industrial places | Flowsic600 | RITCO (Royal Industrial Tech Corp.) | http://www.ritco.co.kr | 1. Outline - Ultrasonic flow meter for controlling the process of industrial places 2. Introduction 3. Characteristics - It is available to choose the sensor by 1 -4 path by the process for each situation. - The installation is easy because the distance between the former and the latter is short. - It is optimized to measure the combustible gas because there is not driving axis. - Maintenance is convenient due to not having moving part. - High accuracy and wide range of measuring scope. 4. Application - Measuring the flow speed and flux of discharged gas from various industrial industries. |
Equipment |
| 1594 | Ultrasonic flow meter special for chimney | Flowsic100 | RITCO (Royal Industrial Tech Corp.) | http://www.ritco.co.kr | 1. Outline - Ultrasonic flow meter special for chimney 2. Introduction 3. Characteristics - Low error rate and high reliability by measuring the average flux inside of the chimney and duct - Minimizing the corrosion and pressure loss caused by internal pollutants due to non-contacting type - Displaying the flow speed and flux selectively - Suitable to the actual place of speedy flow and highly concentrated dust - Various kinds of models applying to each situation (PMD. PHD. PMA. UHD. UMA. UMD) 4. Application - Measuring the flow speed and flux of discharged gas from various kinds of industries |
Equipment |
| 1595 | ULTRASONIC FLOWMETER | ULTRASONIC FLOWMETER | WOORI ENVIRONMENT TECHNOLOGY Co., Ltd. | http://www.wooritms.co.kr/ | 1. Outline Ultrasonic Flowmeter is a measuring instrument to measure the level of Parshall Flum or Weir with a FLOAT sensor and change the measured electric signals into flow amount by Micro Processor. Users can choose the flowmeter type – WE-PF2000US (integrated type) and WE-PF2000UC (separable type) – according to the condition of the site. 2. Introduction 3. Characteristics - Can measure regardless of solid matters - Suitable for caustic wastewater as it is non-contact type - Can measure regardless of SS. temperature. Ph. COD. or sludge - Easy maintenance - Measure wide range of flow amount - May be affected by bubbles 4. Application - Measurement of flow amount |
Equipment |
| 1596 | Ultrasonic Level Transmitter | Ultrasonic Level Transmitter | Daehan Sensor Co., Ltd. | http://www.dh34.com | 1. Outline - This Series Level Sensor is a non-contact level measure instrument. using ultrasonic. The product receives series of non-contact signals reflected from a liquid surface. and converts the signals into the level value on graphic display. 2. Introduction 3. Character - The most used sensor among non-contact water level meters. - More accurate measure with the built-in temperature compensation sensor. - Easy to set up. and convenient without wires. - Output types switchable according to purposes: Current (4~20mA). and Voltage (1~5V) - Can be used in tanks with agitator 4. Application - Industrial drain/sewage treatment plants - Rivers - Dams - Power plants - Untreated/purified water tanks - Chemical/pharmaceutical tanks |
Equipment |
| 1597 | Ultrasonic Sludge Density Meter | ENV-200 | Wess Global Inc Co., Ltd. | http://wessglobal.com | 1. Outline - The ENV-200 is composed with one control part and sensors corresponding to different sites and is an ultrasonic instrument that measures the density of various types sludge at real time that is the sediment or flows with liquid through the pipes at the sites of sewage treatment plant/water purification plant or various water treatment sites. It is composed the sensor part that transmits and receives the ultrasound and the control part that processes received signals. 2. Introduction 3. Characteristics -Maximization of accuracy with application of the Envelope Energy Average Method (EEAM) - Maximization of stability with application of single (multi) transmission and reception - Various types of sensors including the insertion type - Possible for automated controlling with application of process mode 4. Application - Sewage Treatment Plant - Paper Manufacture Plant - Food and Beverage Industries - Grading Plant |
Equipment |
| 1598 | Ultrasonic Sludge Density Meter | ENV200 | Wessglobal, Inc | http://wessglobal.com | 1. Outline - This ENV-200 Ultrasonic Sludge Density Meter is a measuring instrument that measures density of various types of sludge which exists in fluids. The ENV-200 Ultrasonic Sludge Density Meter made by Wessglobal has enhanced a level of measuring accuracy by using unique measuring algorithm (EEAM) which is protected by the patent after going through years of field tests. Moreover. by adopting PCM ((Process Condition Monitoring) algorithm. which identifies not only the density of sludge. but also the state of inner pipes using temperature and velocity. it maximized data security and reliability through measurement that fits process management of each site. 2. Introduction 3. Characteristics - Continuous and real-time measurement. - Monitors the inside of the pipes - Monitoring while storing data for up to 400 days - EEAM (Envelope Energy Average Method) - Various sensors (spool piece. tank mount. and insertion type) - PCM (Process Condition Monitoring) 4. Application - Measures sludge density |
Equipment |
| 1599 | Ultrasonic Sludge Density Meter | ENV200 | http://wessglobal.com | 1. Outline This ENV-200 Ultrasonic Sludge Density Meter is a measuring instrument that measures density of various types of sludge which exists in fluids. The ENV-200 Ultrasonic Sludge Density Meter made by Wessglobal has enhanced a level of measuring accuracy by using unique measuring algorithm (EEAM) which is protected by the patent after going through years of field tests. Moreover. by adopting PCM ((Process Condition Monitoring) algorithm. which identifies not only the density of sludge. but also the state of inner pipes using temperature and velocity. it maximized data security and reliability through measurement that fits process management of each site. 2. Feature - Continuous and real-time measurement. - Monitors the inside of the pipes - Monitoring while storing data for up to 400 days - EEAM (Envelope Energy Average Method) - Various sensors (spool piece. tank mount. and insertion type) - PCM (Process Condition Monitoring) 3. Introduction 4. Application - Measures sludge density |
Equipment | |
| 1600 | Ultrasonic Sludge Interfacial Level Meter | ENV-100 | Wess Global Inc Co., Ltd. | http://wessglobal.com | 1. Outline - Ultrasonic level meter is consisted of one control part and several sensors and is a gauge to measure the Interfacial level (depth) of sludge generated from the Sedimentation Bed of the Sewage Treatment Plant. the Thickening Tank of the Water Purification Plant and the water treatment process of various industries. ENV-100 provides diversified information to promote the user convenience such as Display patterns of Numeric Type. Wave Shape and Data Trend Display. It also has built-in filtering algorithm for any irregular signals existing on site or constantly existing signals by the structures. thereby it provides the stable and reliable measured values. 2. Introduction 3. Characteristics - Possible for Real Time/ Continuous Measurement - Possible for controlling 4 sensors by one control part - Maximum 400 days data saving /analysis - Available with the fixed type as well as the portable Interfacial level meter - Abnormal Signal Filtering Algorithm Application 4. Application - Beginning Punching and Ending Punching of Sewage Treatment Plant - Thickening Tank and Sedimentation Bed of Water Purification Plant - Lime Sludge Storage for the Power Generation Plant |
Equipment |
반응형
'놀면서 일하기 > 창업 아이디어링 + 문서' 카테고리의 다른 글
| 코엑스 일정표 : 2024년 (1) | 2024.01.14 |
|---|---|
| 환경산업 관련 제품 및 기술 목록 : 1601-~~~ (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 1201-1400 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 1001-1200 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 801-1000 (0) | 2023.12.25 |
댓글