반응형
35x34x25.5cm
https://s.click.aliexpress.com/e/_DEHcyIF
11.02US $ 69% OFF|Fire Pit Outdoor Table Camping Folding Stove | Camping Barbecue Grill Folding Table - Outdoor Stove & Accessor
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
환경산업 관련 제품 및 기술 목록 : 1201-1400
| NO | 제품명 | 모델명 | 회사명 | 홈페이지 | 내용 | 카테고리 |
| 1201 | Primo (Flow Converter) | KYONGIN INSTRUMENT & SYSTEM CO.,LTD. | http://www.kiflow.co.kr/ | 1. Outline - This electromagnetic flow meter is a device applying Faradays law of electromagnetic induction which is a principle of measuring electromotive force generated when a fluid flows in a magnetic field. This flow meter can measure a variety of fluids ranging from general top water. food and beverage. waste water to sludge regardless of temperature. density and pressure of liquids with minimum conductivity of more than 0.5㎲/cm. 2. Introduction 3. Characteristics - The Primo. flow converter is pretty much precise and is very convenient to use. -RS 232 digital interface. - The setting program is very simple. - This product features a wide 4-line LCD display window which enables a user to see instantaneous flow and accumulated flow in both directions at a glance. 4. Application - Primo(Flow Converter) |
Equipment | |
| 1202 | Process for stabilizing odor of landfill | Smell Well System | IUT Environment Co., Ltd. | http://www.iutenvironment.com/ | 1. Outline This technology is a method to stabilize gas of landfill during maintaining or restoring construction of defect and unsanitary filled-up-land. and to early stabilize an anaerobic condition of the inside of the filled-up-land into an aerobic condition. This system includes a blower for air inhalation and landfill gas extraction. an air regulator for automatically changing intake and injection of air. a biofilter for decomposing foul smell gas and toxic gas into aerobic microorganisms. and a piping system having lances and pipes. 2. Introduction This is a method to convert an anaerobic condition of the inside of the filled-up-land into an aerobic condition by extracting foul smell gas and toxic gas of the inside of the filled-up-land and removing them with a biofilter. and injecting warm air. which contains abundant air including aerobic microorganisms inside the biofilter. |
Equipment |
| 1203 | Pulseless metering pump | Pulseless metering pump | Eco Green Tech Co. Ltd. | http://www.ecotsc.com | 1. Outline The rotational motion of a pulseless metering pump motor changes to the back-and-forth motion through an eccentric cam. When a diaphragm attached to the fore end of a pump load moves back and forth. a volume in head increases and decreases and negative pressure and static pressure in a pump head generate alternatively and liquid chemical is absorbed and discharged. When a diaphragm backs. negative pressure in a pump head generates and at the moment. check ball in discharge side blocks water course which prevents a back flow of liquid chemical in a pipe in the discharge side. 2. Introduction 3. Characteristics - Pulseless metering pump with a single head structure for the first time in the world - Durable drive - Convenient flow regulation and high accuracy - Diverse connection methods - Attached part of a drain valve in head(optional) - Easy field installation - Rich peripherals 4. Application - Fixed quantity injection of chemicals in water treatment plants - Fixed quantity injection of rust inhibitors - Laboratory - Fixed quantity injection of container cleaning agents - Fixed quantity injection of chlorine and steriant in a swimming pool - Fixed quantity injection of chemicals in plating plants. chemical plants and textile mills - Fixed quantity injection of steriant and food additives in the food and process industry - Fixed quantity injection of liquid chemicals in various uses |
Equipment |
| 1204 | Magnetic Pump | Magnetic Pump | Dongnam Engineering Co., Ltd. | www.dongnameng.co.kr | 1. Outline A chemical pump that is required to convey. supply and circulate chemicals such as hydrochloric acid. sulfuric acid. nitric acid. sodium hydroxide. chromic acid. hydrogen peroxide. solvent. and so on. The pump has a permanent magnet attached on a pump impeller. and so as to rotate the impeller. it has another permanent magnet on a motor shaft. such that when the motor starts to rotate. the impeller rotates by the magnetic force. thereby making the pump operate centrifugally. 2. Introduction(See table 1) <Table 1> MODEL Size Material Weight PX series Miniature PP 65L/Min or less PX-N series Miniature Natural PVDF 65L/Min or less PX-F series Miniature ETFE 65L/Min or less PX-D series Miniature PP. DC MOTOR 65L/Min or less PS series Small PP 120L/Min or less PS-F series Small ETFE 80L/Min or less PW series Medium PP 530L/Min or less PW-F series Medium ETFE 530/Min or less PW-C series Medium ETFE LINER 1300L/Min or less PW-V series Vertical PPS 100L/Min or less 3. Characteristics 1) Having a seal-less structure in which no leakage occurs. not requiring any shaft that is sealed by grand packing or mechanical seal 2) Simple structure where an assembling and disassembling work is easy 3) Small in size resulting in the utilization of space with ease 4) Easiness of the selection of materials (PP. PVDF. TEFLON. PFA. SUS. etc) according to liquid 5) Reduction in maintenance cost by removal of seal exchanging 4. Application Fields Water treatment. Semi Conductor application. PCB machine. Electroplating scrubber system. Chemical processing. De-ioniging Equipment. Buttery manufacturing | Equipment |
| 1205 | SCUM skimmer | SCP | Shinshin pump manufacturing factory Co., Ltd. | http://www.shinshinpump.co.kr | 1.Outline Scum skimmer absorbs and removes floating matters (e.g.. scum. oil. bubbles) on the surface of water. 2. Introduction 1) Minimization of blocking of suction inlet and warming-up of pump by introducing jet ejector principles. 2) Mounting of scum cutting device for completely removing hard. larger scum than the suction inlet. 3) It is a floating type that adjusts the position of the suction inlet according to the changes of the amount of scum of settling tank and the surface of water. thereby making the removal of the floating matters more effective and thereby giving no mechanical trouble.(See table 1.Attach-1) 3. Characteristics 1) Minimization of blocking of suction inlet or warming-up of pump 2) Complete removal of scum by means of scum cutting device 3) Easy adjustment of the position of suction inlet according to the change of the surface of water 4. Application Treatment of floating matters of settling pond of water system. collection of floating matters on the surface of water. removal and return of floating matters in settling tank and raw water tank of sewage and wastewater treatment equipment | Equipment |
| 1206 | Pump | Superior vortex pump | Jungsun Environmental Machinery Co., Ltd. | http://www.jungsun.co.kr | 1.Outline Superior vortex pump is capable of conveying the liquid in which solids are mixed and is configured in such a manner as to pass smaller sludge than the diameter of discharge outlet without any trouble. not blocked by protrusions or edges during the flow of fluid. Also. the impeller is positioned in the inside of a casing so that it generates eddy current and vortex. thereby making it possible to convey a dustcloth. 2. Introduction (See table 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000223-2.jpg></center> 3. Characteristics 1) It does not have any obstacle over the whole pump casing. such that solids flow to the front of the impeller. not passed through the impeller. thereby eliminating a possibility that it is blocked by the sludge during conveyance and minimizing the wearing and corrosion of the impeller. 2) The pumping is carried out by the impeller such that the fluid vortex is formed. and by the force of the vortex. the sludge is pushed by the centrifugal force in the interior of the casing to thereby convey about 80 % of sludge in the discharge outlet. 3) It can be easily assembled and disassembled without any separation of the pipes. and it is made of good quality of materials. such that it exhibits an excellent durability and high degree of compatibility with parts. 4) It is small and light and easy to handle. 4. Application 1) Sewage and wastewater treatment: Conveyance of solids and sludge of sewage and wastewater 2) Sewage disposal: Conveyance of raw sewage. sewage deleterious particles and various kinds of sludge 3) Others: Conveyance of a variety of wastes like chemical industry. food industry. agricultural industry. and leather industry | Instrument & Chemicals |
| 1207 | Moineau pump | MONAS-B Type | MONAS PUMP CO., LTD. | http://www.monas.co.kr | 1. Outline Moineau pump is used for a sophisticated process in various industries as it can pump a fixed amount of any liquid. which other centrifugal pump or piston pump cannot. by its excellent conveying ability. Therefore. the Moineau pump is widely being used in many different industrial fields. 2. Introduction - Moineau pump is a rotation capacity type. single eccentric screw pump. - Rotor. which is a metal bolt with a circular section. is equipped in the middle of a stator (elastic material) with an oval section. By using a driving shaft and universal joint. the rotor is rotating with the center of the eccentric axis. then the rotor reciprocates rotating within the stator. - The pump conveys the liquid filled in the spatial capacity generated by the rotor and stator. By the continuous piston motion the liquid is transferred from inlet to outlet. 3. Characteristics - Pulseless pump - Outlet amount is proportional to the rotation rate. - Optimal for an automatic control - No blockage. agitation. turbulent - Reverse rotation possible - Conveying a fixed amount of the liquid containing a large amount of fibers and suspensions - Conveying dehydrated cake through a pipe - Installation and design plans with freedom - High torque & low noise inverter gives high efficiency. - High outlet pressure - Powerful self-priming - Outlet amount selective from large to small amount 4. Application - Environmental water treatment - Concentrated pulp. bleach. various kinds of dehydrated cake. - Cosmetics and pharmaceutical industry - Oil refinery - Wastewater. sewage treatment - Construction. mining industry. |
Equipment |
| 1208 | Pump Control Valve for Sewage | Pump Control Valve for Sewage | Balem Co., Ltd. | http://www.balem.co.kr | 1. Outline - Pump Control Valve for Sewage consists of a Robocon Main Valve. a 5-Way Solenoid Valve. a Limit Switch and an Air Compressor. and is installed in the discharge part of the pump in order to prevent surge in the inside of the pipe which occurs during the operation and stop of that pump. When a pump suddenly stops due to its malfunction in power supply. this device prevents backwashing by blocking the valve. 2. Introduction 3. Character - Complete separation between the driving part and control part. - Double chamber structure that makes possible accurate and precise control. - Automatic block under sudden conditions like power failure. 4. Application - Pump control valve. |
Equipment |
| 1209 | Pump Controller IJDC90C | Injae Science Co., Ltd | http://www.pump114.co.kr | 1. Outline • Pump controller (Model: IJDC90C) with function to adjust by external input (4~20mA) and with a self adjustment function 2. Introduction 14Biz-462_Pump_Controller_IJDC90C.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-462_Pump_Controller_IJDC90C.JPG'>3. Character • To set external input function • Self adjustment function: In case of INT. speed (0 to 200) is set by up/down key (triangle adjustment key. right) and it will be actuated by pressing ON/OFF key (first key on the left) • Normal (FOR) and Backward (RED) operation: Once turn the pump on and press MODE key (the 2nd key from the left) for 5 seconds. normal and backward direction is switch. 4. Application • FMI Pump • Model: usable for RHB. QB |
Equipment | |
| 1210 | Pump for Civil Engineering Work | Pump for Civil Engineering Work | Pump for Civil Engineering Work | http://www.jcpump.co.kr/ | 1. Outline - Pump for civil engineering work which is used in draining water in civil engineering works and construction works. 2. Introduction 3. Character - Convenient transportation and installation as this product is compact and lightweight. - Easy to operate and highly safe. - Highly efficient and economical. 4. Application - General civil engineering. construction work and complex drainage for agriculture. - Pumping and drainage for industry factories and buildings. - Pumping and drainage for underground facilities. |
Equipment |
| 1211 | Pump Servo unit | Pump Servo unit | Dong-il M.T Co.,Ltd. | www.dongilmt.com | <DIV> Servo unit - Adaptable unit for entire model </DIV><DIV>It adjusts flow capacity automatically with information from PH meter. It is able to control discharge volum of metering pump automatically by the input signal of flow. ph. turbidity etc(DC 4~20mA/+1~+5v)</DIV><DIV> </DIV><DIV> Features:</DIV><DIV>1) Auto-control by the input signal(Diversity)</DIV><DIV>2) The whole type Servo unit</DIV><DIV>3) Various Controlling mode(Fixed Quantity)</DIV><DIV>4) Protective function for servo motor(Durability)</DIV><DIV>5) Handiness of system(Simplicity)</DIV><DIV> </DIV><DIV> Spac.: </DIV><DIV>1) Input signal : 4~20mA. 1~5V DC(Impedance : 250)</DIV><DIV>2) Voltage : 1 110v. 220v AC 50/60Hz</DIV><DIV>3) Protection : Equivalent to IP54</DIV><DIV>4) Installation : Indoor or Outdoor(Except hazardous area)</DIV><DIV> </DIV><DIV>The typical usage is waste water treatment. water and sewage refinery. swimming pool. Sterilizing water. City waste water. Feeding antiseptle. Feeding various medical fluid. chemical handling factory (cloth. acid process. plating) and so on. In addition. it is used in the process of transmitting chemical fluid correctly.<br></DIV> | Water Treatment |
| 1212 | Pure water production equipment | Pure water production equipment - WS TYPE | CHASEDAI ENVIRONMANT CO., LTD | http://www.chasedai.co.kr | 1. Outline Pure water production equipment is equipment for producing pure water by eliminating ions (Ca2+. Mg2+. SO42-. Cl-. SiO2. etc) in water through use of ion exchange resin. The equipment is used for water supply for boilers. pure water for electropainting. heavy metal absorption. circulation-reuse of wastewater in a metal surface treatment process and reuse of wastewater. The co-current unit (1st generation) that was commercialized in 1940s adopts the down-flow method for both exhaustion and regeneration so this unit is still widely used and operated even though it is not installed anymore due to its high operation cost. The counter-current unit (2nd generation). which was developed in 1950s to reduce the increased use of regenerant for the co-current unit and to improve water quality. adopts down-flow exhaustion and up-flow regeneration. The counter-current unit has lots of problems. For example. it uses groundwater in order not to get mixed with the ion exchange resin when regenerating. In 1960s. the counter-current unit (3rd generation) developed by BAYER of Germany adopts up-flow exhaustion and down-flow regeneration. There are several types of the 3rd generation unit such as Fluidized Bed Process (W-Type). Lift Bed Process (L-Type). Rinse Bed Process (R-Type) and Multistep Process (MS-Type). 2. Introduction The inlet directions for the exhaustion and regenerant are reversed (up-flow exhaustion and down-flow regeneration). In the back-wash. the half of the resin is transferred to each of cationic and anionic back-wash towers and back-washed separately. The resin is charged at the upper and lower part of strainer plate. and the inert resin layer lies in between the upper part of the strainer plate and the resin layer. The depth of the inert resin layer is determined by the diameter of the tower. This prevents the blockage of strainer nozzle caused by the broken resin debris. and evenly spreads the regenerant over a section of the tower. Fine polishing zone at the upper part of the resin layer consists of very small resin particles. and it is the fine polishing layer that increases the efficiency of operation and minimizes the leakage of ions. 3. Characteristics - High quality treated water - Short regeneration time - Small amount of waste fluid generated - Small waste fluid storage tank and low expense for wastewater treatment - Easy collection and elimination of SS - No Channeling. - Small ΔP - Simple resin tower structure - Simple piping | Equipment |
| 1213 | Purification treatment system | Organism oxidization filtering apparatus | SHINWOO ENGINEERING LTD. | http://www.shinwu.co.kr/ | 1. Outline An organism oxidization filtering method is an aeration filtering method in which air (including pure oxygen. if necessary) is consecutively uniformly applied from a filter paper while performing filtering. 2. Introduction The present purification treatment system facilitates inhabitation of microorganism at a filtering layer. removing organic material. iron. manganese. etc. biomembrane filtering by microorganism fungus and oxidization by supplied air. given aeration effect and flotation process. etc.. by the supply of air. and the like. This system maximizes a natural purification method. 3. Characteristics 1) Natural purification method of an individual natural equilibrium type filtering mode - Automatic filtering mode without controlling the flow of filtering - No negative pressure. and good water quality - Local development (see waterworks facility reference) - Natural purification mode + organism · oxidization filtering mode 2) Under-drain system for simultaneously cleaning air and water - Using super-type under-drain system that is firstly developed in Korea. - As the under-drain mode for simultaneously cleaning air and water is used. there is no expansion of a sand layer and no flowing. - Activation of microorganism is restored quickly after cleaning. 3) Technology using fluid characteristic of air and water - Using fluid characteristic of air and water when air is supplied from the bottom while performing filtering - Air is consecutively supplied by allowing injected air not to flow out toward a filtering flow side. 4) Combination of complex technology - Development of filtering mode: natural equilibrium filtering mode - Development of an under-drain system: Super-type under-drain system - Development of a backwash flow control system: Utility Model - Development of an air supply system: Air supply system by flowing backward pressurization fungus equal variance implantation - Development of technology in which a filtering effluent head keeps higher than a filtering head (using a fluid property) 4. Applications 1) Pre-. medium- and post-treatment of waterworks (replacing advancement purification treatment) 2) Secondary and third treatment of sewage/wastewater | Equipment |
| 1214 | Purified Water System | Purified Water System | Dure Technology Co., Ltd. | http://www.dure.com | 1.Outline Purified water is the water from which all impurities and ions are completely removed by using a reverse osmosis concentration unit and an ion exchanger. The purified water has a resistance value of more than 1 Mega-OHM. and if water has a resistance value of more than 18 Mega-OHM. it is called ultra pure water. 2. Introduction - Functions of units 1) Pre-processor: Suspended solids and organic materials are all removed from the water by using a micro filter and activated carbon. The filter and activated carbon used once are exchanged into new ones. 2) Mixed-bed ion exchanger: This is a mixed bed with positive ion exchange resin and negative ion exchange resin. and if raw water is passed. it conducts in turn the positive and negative ion exchanges. without any limit. thereby producing a high degree of pure water. 3) Post-processor: This is a kind of mixed-bed ion exchanger for finally reducing the concentration of ion under several tens of PPB units and does not regenerate the ion exchange resin. 4) Membrane: A reverse osmosis concentration unit removes more than 98 % of negative and positive ions in the water. An ultrafilter finally removes microorganisms or more than MW 10.000 of foreign materials. 5) Sterilizer: This removes the microorganisms that remain in the water or are generated in the system by using ultraviolet rays and suppresses the generation of them in a purified water tank. 3.Characteristics The cleaning of the reverse osmosis concentration unit and the reproduction of the ion exchange resin are carried out in a fully automatic manner if the quality of water reaches a predetermined value. such that the system is kept to operate automatically. 4. Application Electronic industries. drug manufacturing industries. and other industries using purified water. | Equipment |
| 1215 | Purifier Moduel Unit | hoseung Enterprise Co., LTD. | hosent.co.kr | PURIFIER MODULE UNIT. which is composed of MAIN ENGINE F.O. SUPPLY UNIT. GENERATOR F.O. SUPPLY UNIT and BOILER F.O. SUPPLY UNIT. is so large that it even forms its own room in a ship. In addition. the engine of a ship is also so large that it requires large quantity of fuel. Therefore. relatively inexpensive BUNKER OIL is mainly used for ships and PURIFIER UNIT is installed to purify BUNKER OIL. A great number of valves and devices are equipped as a module unit so as to transfer purified oil from PURIFIER to each STORAGE OIL TANK in the engine room. and to easily utilize and maintain those valves and devices. | Equipment | |
| 1216 | Purifying soil method – Chemical oxidation method | Sindaeyang Co.,Ltd | http://www.sindaeyang.co.kr/ | 1. Outline - It detoxifies organic matters through oxidation reaction by adding chemical compounds such as ozone and hydrogen peroxide. 2. Introduction 3. Characteristics - High efficiency and short treatment time - No toxic intermediates is produced - Treat polluted soil in a short time 4. Application - Polluted soil from volatile. semi-volatile organic matters and harmful organic compound |
Technology & Process | |
| 1217 | Purifying soil method – Soil vapor extraction | Sindaeyang Co., Ltd. | http://www.sindaeyang.co.kr/ | 1. Outline - It extracts and volatilizes volatile polluted matters in soil to form pressure difference in soil by digging extractions and vacuuming. 2. Introduction 3. Characteristics - Use in polluted soil without digging - High efficiency with other technologies - Economic effect 4. Application - Polluted soil by oil and organic chemical compounds |
Technology & Process | |
| 1218 | Purifying soil method – Thermal desorption method | Sindaeyang Co.,Ltd. | http://www.sindaeyang.co.kr/ | 1. Outline - With oxygen below 500℃ or without oxygen. it desorbs polluted matters by volatilizing them. The emitted gas is transferred into gas treatment system. 2. Introduction 3. Application - Polluted soil with volatile and semi-volatile organic matters |
Technology & Process | |
| 1219 | Purifying soil method – Washing method | Sindaeyang Co., Ltd. | http://www.sindaeyang.co.kr/ | 1. Outline - It weakens surface tension of polluted organic matters in soil particles by using washing liquid. It liquefies heavy metal. classifies and treats heavy metal and polluted organic matters from soil particles 2. Introduction 3. Application - Polluted soil from oil. heavy metal. cyanide and PCBs |
Technology & Process | |
| 1220 | PURIST UV Ultrapure Water System | JW E&C | 1. Specifications Feed Water: Pre-treated Water ( RO water or Distilled water ) Flow Rate: 1-1.5L/min Quality of product water: · Resistivity: 18.2 MΩ•cm @ 25 ℃ · TOC Level (Typical Values): ≤ 5 ppb* · Particles:（>0.22µm）< 1 /mL · Microorganisms: < 1 cfu/ml · Pyrogen: < 0.001Eu/ml ( with Millipore BioPak Point-of –use ultrafilter ) Dimensions: Length×Depth×Height(cm): 20.5 X 35X 45 Operating Weight ( With R PAK): 6.5kg（12kg） 2. Applications： · Preparation/dilution of HPLC mobile phases. blanks. sample and buffers in GC. HPLC.AA. ICP-MS and other advanced analytical techniques. · Preparation of media for mammalian cell culture. IVF. reagents for molecular biology. | Equipment | ||
| 1221 | PVC dual pipe | PVC dual pipe | Nuvotec. Co., Ltd. | http://www.nuvotec.co.kr | 1. Outline PVC dual pipe having a rubber ring inserted into a pipe. This product is used for public sewage pipes or sewage and rainwater pipes for apartment. etc. 2. Introduction(See Figure) 3. Characteristics 1) Good strength: Have the highest pipe stiffness as a ductility sewage pipe (over 8kgf/cm² in case of PVC dual wall pipe 5% change on the basis of KS) 2) Good constructability 3) Good water tightness: Guarantee water tightness with a rubber ring joint. 4) Suitable for environmental protection: Prevent introduction of underground water and contamination of soil. Can be recycled as pure plastic products. 5) Chemical-resistant: Resistant to various chemicals such as acid. alkali. etc.. impossible bacteria inhabitation. 6) Creep properties: PVC dual wall pipe is very low in the creep property compared to HDPE. Thus. PVC dual wall pipe has almost no transformation even after a long time. but HDPE is weak in a long-tern weight and is easily transformed. 7) Rubber ring: EPDM material of good physical properties and semi-permanent. 8) Auto-digestion 4. Applications 1) Sewage and rainwater tributary pipes for public sewage 2) Sewage and rainwater main pipes for apartments 3) Intercepting pipe line for sewage treatment | Equipment |
| 1222 | QuickMix | QuickMix | Dongyang Pump Co., Ltd. | www.dylobepump.com | 1. Outline - This Vogelsang QuickMix which integrates a crushing device composed of two axes and a transfer device through a rotary lobe pump into single equipment improves productivity by performing crushing and transfer simultaneously and has no difficulty in the process of delivering food waste. butchery waste water. hay. livestock manure. animal feed and so on. 2. Feature - Crushing and compressed transfer is possible through screws on both axes. - The crushing of solids is possible through high-speed rotation. - This QuickMix is equipped with a box that separates substances such as gravel and spoons which cannot be crushed. - This QuickMix is equipped with a mechanical seal that does not need sealing water. - This QuickMix features high durability thanks to the use of a cutting blade of Hardox material. - Easy and quick repair is possible. 3. Introduction 4. Application - Crushing and Transfer |
Equipment |
| 1223 | Radon Eliminating Equipment | Radon Eliminating Equipment | Pure Water Laboratory Corporation | www.purewater.co.kr | 1. Outline - It is installed in the upper part of the water tank and without an electronic supply facility and power. no electric fees occur. Also. because there is no control system. facility management expenses do not take place as a consequence of no need to have control personnel for the system. With the aeration using the Law of physics(Bernoulli Principle). it eliminates Radon which is a natural radioactivity substance from the underground water. 2. Introduction 3. Character - Install in the upper part of the water tank and no need of management for the absence of the control system. - No power. non-manned driving and as a consequence. zero facility management expense. - Low initial investment cost and outstanding effect. - Semipermanent use with one-time installation. - Keeping the level of Radon(natural radioactivity substance) at lower than 400pCi/L. 4. Application - The detection areas of Radon which is a natural radioactivity substance in the underground water and water supply plants. |
Equipment |
| 1224 | Radon measurement Analyzer | Doseman Pro | KEMIK CORPORATION | http://www.kemik.kr | 1. Outline - A radon monitoring equipment corresponding to The Indoor Air Quality Process Test Method that is being used for personal radiation dosimeter. It performs the indoor radon monitoring on the work environment that can print out the real time measurement data screen 2. Introduction 3. Characteristics - High Sensitivity Radon Progeny Measurement Device - 8 hours continuous monitoring silicon detector type - Equivalent Radiation Dose Calculation Function - Permanent recording and display possible for Potential Alpha Energy Exposure(PAEE). Radiation Dose. Equivalent Radon Concentration (ERC). Potential Alpha Energy Concentration (PAEC) 4. Application - Corresponding to the Indoor Air Quality Process Test Method. Indoor Radon Monitoring - The Indoor Radon Monitoring on Work Environment. Personal Radiation Dosimeter - Radiation Dose Measurement at Reference Point |
Equipment |
| 1225 | Radon METER | RAD7 | KINE INDUSTRY | http://www.e-kine.com | 1. Outline - This meter is used to measure fine dust. carbon dioxide. carbon monoxide. HCHO(formaldehyde). VOC. radon. airborne bacteria. asbestos and nitrogen dioxide. etc. in houses and public use facilities. The meter is composed of a products that meets the indoor air quality process test method and a portable product. 2. Introduction 3. Characteristics - Both short time measurement and continuous long time measurement are possible. - Both measuring radon and thoron and graph print-out are possible. - Measuring 4pCi/L which is an EPA Action Level within one hour is possible. - Remeasuring within a few minutes through a prompt zero point adjustment and a rapid speed of response is possible -High sensitivity measurement of 0.2 pCi/L 4. Application - Measurement of radon gas concentration in buildings and underground living space - Measurement of radon emission in building and civil engineering materials. |
Equipment |
| 1226 | Radon Mitigation | The Fantech HP 190SL | The Fantech | http://www.aikencolon.com/ | Fantech HP190SL HP 190SL Radon Mitigation In Line Fan 4 Inch Duct Exhaust Ventilation The Fantech HP 190SL In Line Fan has a low profile design for fast & easy wall mounting to accomodate most Radon Mitigation applications. and will provide you with a higher level of Indoor Air Quality.  http://img.konetic.or.kr/apec-vc/xml/img/market_place/9-1.jpg'>Fantech HP 190SL Features 115V. 5 Year Warranty. CSA Certified & UL LIsted 158 CFM 4 Duct Diameter Height 17 3/4 Width 7 3/16 Weight 9 pounds Max. Wattage 85W Maximum Amps .78 Housing Features UV resistant. durable plastic UL Listed for commercial applications Factory sealed for leakage prevention Condensate bypass Wall mount with vibration isolation Approved for installation in wet environments Motor Features 100% enclosed for optimum protection Highly efficient motorized EBM impeller Thermal overload protection with automatic reset 7 to 10 yrs. average life span with continuous load |
Equipment |
| 1227 | Radon Removal Equipment | Radon Removal Equipment | Pure Water Institute CO., LTD. | http://www.purewater.co.kr | 1. Outline • An equipment for areas and water supply plants where radon. a natural radioactive material. is detected in the ground water. • An equipment for stable clean water supply. It uses the aeration method. which utilizes the Bernoulli principle. 2. Introduction 14Biz-12.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-12.JPG'>3. Character • It is installed on top of water tanks. • It can be installed without using a power or electric supply system thus saving on electricity costs. • Additional management efforts to control the equipment are not necessary. (Facility maintenance costs are not needed.) • Additional installation for aeration. such as blower and compressor. is not necessary. • Once the equipment is installed. the level of radon is kept below 4000 pCi/L 4. Application • Radon removal • Water supply • Water purification |
Equipment |
| 1228 | Control of Rainfall Runoff for Efficient Reduction of CSOs and Management of Sewage Treatment Plant | Control of Rainfall Runoff for Efficient Reduction of CSOs and Management of Sewage Treatment Plant | Environmental Project Service Solution Inc. | http://www.weps.co.kr | 1. Outline - It has a structure that can prevent inverse stream and hydraulic interception. - It prevents solid settlement by installing an invert in the storm overflow chamber. - It prevents blocking by improving the orifice structure. - It improved the flux adjusted water quality and inflow concentration depending on inflow amount and pollutant load. 2. Introduction 2-1. Electric Discharge Regulator (EDR) 2-1-1. Auto-control gate - Intercepting current control: It controls the intercepting current when the inflow exceeds the capacity of pipes and treatment plant. - Prevention of inflow of river water: When the river flows backward due to increase in water level of the river. it closes the gate. 2-1-2. Improvement of inflow structure - It prevents solid settling by reducing the section. - It prevents blocking of the gate with a screen. - It prevents overflow accidents. 2-2. Storm overflow chamber control system 2-2-1. Sensor for measurement of water level and quality - Ultrasound water gauge (Measures current and controls intercepting current) - Conductivity meter (Measure water quality and controls intercepting current) - Easy maintenance with the auto-cleaning function - Intercepting current control that considers current and water quality 2-2-2. Controller - It collects and transmits measurement values of current and water quality. - It forms logic that controls the openness of the auto-control gate. - It is used to monitor the pipes. 2-2. Process - Installation of conductivity meter and water gauge: Installing adjust the gate openness considering concentration and current during the raining season - Controller: Adjusting the gate openness and transmits data with monitoring system - Enlargement of orifice pipe diameter: Being able to enlarge the orifice diameter since it can control the intercepting current with the gate - Ware: Being able to increase the height of the ware since it can control the intercepting current using the gate preventing overflow accidents - Section reduction: Reduceing the section in order to secure the current speed so that it can prevent solid settling. - Change in screen structure: Preventing orifice blocking by moving the screen to the upstream 3. Characteristics 3-1. Effects of storm overflow chamber control system - Closed chamber: Prevents odor and improves the beauties of the city - Optimized intercepting system: Maximizes intercepting pollution load and minimizes CSOs and pollution load - Expanded ware height and pipe diameter of orifice: Prevents CSOs accidents caused by piling and orifice blocking during the dry season - Interception control linking with water level and quality: Reduces cost for power of the treatment plant and improve the management efficiency through restrained inflow of river water and high-concentration interception of sewage. 3-2. Schemes for storm overflow chamber control system <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=317_3.jpg></center> 2-5. Storm overflow chamber control program <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=317_4.jpg></center> 4. Applied field Sewage treatment plants | Technology & Process |
| 1229 | Rainwater reuse system | Rainwater reuse system | UniECO Co., Ltd. | http://www.uni-eco.co.kr | 1. Outline - Rainwater is a source of all water resources. Management of rainwater has change to a side based management from a line based one and has changed to a decentralization based management from a centralization based one. Efficiency of rainwater reuse facilities has been proven at home and abroad. Efficiency of treated water can be maximized by using an advanced filter and an AOP system. 3. Character - Flood prevention in urban areas - Water saving 4. Application - Rainwater reuse system |
Technology & Process |
| 1230 | Rapid sedimentation apparatus | Rapid sedimentation apparatus | Chungsoo Water Treatment Industrial Co., Ltd. | http://www.csw21.co.kr | 1. Outline Rapid sedimentation apparatus is a representative slurry circulation type apparatus. and sediments and removes turbid matters or heavy metal materials. such as Fe or Mn. of raw water. It mixes. aggregates. sediments and separates chemicals and removes sludge in a single tank. and is a water treatment apparatus capable of adapting to any raw water conditions. 2. Introduction This product includes a first reaction tank. a second reaction tank. and a separation tank. and continuously performs mixing. stirring. aggregation. sedimentation. equal separation. and sludge removal in a single tank. It is used for industrial water treatment and wastewater treatment as adapting to any raw water conditions. Sludge of a predetermined concentration is circulated inside the tank. and newly introduced raw water and aggregate are mixed with the high-concentrated sludge to form a large flock. and then. sedimented and separated. It can effectively treat sludge if floating materials. fine particles. organic materials are contained in the raw water or if oxidizing treatment and sedimentation is performed due to lots of Fe and Mn. <Aggregation principle> -. Colloid elements: (-)electric charge => Colloid elements exist in the water under a stable dispersion condition while repulsing to each other due to their (-)electric charge. -. Mutual contact and aggregation by collapse of the stable condition of colloids => Formation of unstable condition of colloids 3. Characteristics (1) Small occupied area. low construction cost. and easy operation. (2) It can be operated with the minimum drainage treatment as sludge is concentrated at a high level. (3) It is easily operated as slurry is circulated well even though raw water quality is rapidly changed. 4. Application (1) Sedimentation land of sewage and wastewater treatment plants (2) Sedimentation land of water purifying plants | Equipment |
| 1231 | Raputa (Moveable sludge treatment equipment) | ARK Co., Ltd. | http://www.ar-korea.com/ | 1. Outline Equip dehydrating. concentration and chemical devices in a car. It can be used for any place or anytime for small waste water treatment plants where needs more dehydrating amount seasonally and buking sludge. It is moveable sludge treatment equipment which has no noise/vibration. doesn’t need man force and has stable moisture content. 2. Introduction 3. Characteristics - Stable efficient dehydration regardless of sludge characteristics - Stable dehydration from low concentration (2000ppm) to high concentration - Low moisture content (under 80%) - High collecting solid matter (over 95%) - Economical Running cost - Doesn’t need water for cleaning - Reduce the construction expense since it doesn’t need concentration facility - Reduce expense for buying automobile and maintenance since it doesn’t need sludge transferring automobile - Easy automatic maintenance without men force - Simple structure and operation of machine - Clean environment without noise or offensive odor - Can dehydrate without controlling sludge - Easy to treat with transferring treated cake - Solve environmental problems while waste water treatment plant is used (Transportation. offensive odor. dehydration in case of combined treatment and so on) 4. Application - Moveable sludge treatment |
Equipment | |
| 1232 | RDF extruder | SHEN-TECH | http://www.shentech.kr/ | The feeding wastes are moved dice in the hydraulic extruder by the single screw . scattered and heated. The pressed wastes are fed to dice through several pins connected to hydraulic cylinders and heated by external heating. ● Blocking free from small particles ● Stable production : not effected by moisture ● Save the expendables ● Save the energy and maximum productivity ● Excellent productivity ● New concept extruder minimizing problems ● Maximum production ● Patented technology ● Most easy to handle | Recyling | |
| 1233 | RDF/RPF Facility | RDF/RPF Facility | Samho Environmental Technology Co., Ltd. | http://www.samhoenv.co.kr | 1. Outline - Shredder: To improve porosity. enlarge specific surface area. improve aridity an combustibility. and make separation easy by crushing inflow waste. - Pulverizer: Pulverization in finally uniform size before RDF/RPF extrusion. - Extruder . 2. Introduction 3. Character - Disassembling/installing a shank/shaft/cutter in all-in-one type. - Smooth raw materials inflow by the specialized shape of a Cutter Hook. - Preventing jam situation of the Shredder by installing a Hammer Mill. - Preventing impurity inflow by the outer installation of a bearing House. - Low costs for initial installation and maintenance. 4. Application - Waste plastics treatment |
Equipment |
| 1234 | Real time odor information management system (OMS-Tn) | OMS-Tn | MnCo Inc. | http://www.mnco-ecc.co.kr | 1. Outline - Real time odor information management system checks and records the odor and investigates the condition of odor in the business space and industrial complex. 2. Introduction 3. Characteristics - Storing the detected odor information at the server (the intensity of odor. sensor value. wind direction. wind speed. temperature. and humidity etc.) - Investigating the odor-producing sources. - Providing the fundamental program to solve the odor problem by investigating the condition of odor. - It is available to display the intensity of odor as the dilution number as Dynamic Olfactometry method. - Cheap maintenance cost by developing the sensor module. 4. Application - Real time detection and record of odor. checking the fundamental odor problem by investigating the odor information |
Technology & Process |
| 1235 | Real-time Odor Monitoring System | Real-time Odor Monitoring System | MAT | http://www.mat.co.kr | <h2 class=h2sm>Real-time Odor Monitoring System</h2> <h3 class=h3-SM>OMS-Tn (Post Type)</h3> <div class=smell01_info> Upgraded odor monitoring system (OMS-TN) detects and records odor in real time. which leads to <strong>1)</strong> recognize the odor s originated place. <strong>2)</strong> monitor odor in strength</div> <div class=smell01> <ul class=smell01List> <li>Installed in specially local or wide area giving out odor</li> <li>Monitor. transmit the data (ex：odor intensity. sensor value. wind velocity etc) to computer in center and record in the server</li> <li>Recognize odor's originated place immediately</li> <li>Analyze the data by experts. which supply total<br />solutions of odor problems to customer</li> <li>Capable of displaying legal standard such as dilution ratio instead of odor intensity</li></ul></div> <div> </div> <div> </div> <h3 class=h3-SM>Minimization of effect on Temp. & Humidity</h3> <ul class=smell01List> <li>Cooling fan & air curtain for preventing exterior case from overheating</li> <li>Double plate for preventing exterior case from overheating</li> <li>Digital space heater for preventing exterior case from being cooled</li> <li>Uniformly heating up sensor room</li> <li></li></ul> <div class=smell03> <h3 class=h3-SM>Display of odor data</h3> <ul class=smell01List> <li>Displaying odor intensity level. sensor intensity. wind velocity. direction of the wind on the screen</li> <li>Capable of displaying legal standard such as dilution ratio by inputting calibration data</li> <li>Capable of tracking the odor s originated place by analyzing the accumulated data of odor intensity. wind velocity. direction of the wind. temperature. humidity</li></ul> <div class=smell03_img> </div></div> <div class=smell03> <h3 class=h3-SM>Project reference</h3> <ul class=smell01List> <li><strong>Site：</strong>Food waste composting facility. Chun-cheon city</li> <li><strong>Supply scope：</strong>Odor detecting device. Electric bulletin board. weather research craft. Wireless LAN. Server etc.</li> <li>Installed to solve complicated odor issue s civil appeal between local habitant and public officer</li> <li><strong>Sky blue line：</strong>Food waste composting facility.</li> <li><strong>Yellow line：</strong>Waste water treatment facility.</li> <li><strong>Green line：</strong>Habitation site</li></ul></div> <div> </div> | Air Treatment |
| 1236 | RECESSED CHAMBER PLATE | RECESSED CHAMBER PLATE | Sinwoo Co., Ltd. | http://www.sin-woo.com | 1. Outline - This RECESSED CHAMBER PLATE features a more efficient filtering capacity by adopting an innovative method for slurry outlets and is exceptionally efficient in terms of post management and maintenance cost as a plate and a membrane is separated. 2. Introduction 3. Characteristics - More efficient in dehydration when a filtration area is large and cake thickness is thin as the Plate employs a method of forming a chamber by pressing a filter plate and then of carrying out dehydration by forcibly injecting slurry into the chamber. - Suitable for filtration of non-filterable sludge as this Plate is widely used and the separation of a cake is convenient. - Maintaining a clean work site as a gasket filter plate which is sealed by installing an O-ring on the edge of a filter plate and around a slurry passage tube completely seals slurry in dehydration process in production. 4. Application - Filter |
Equipment |
| 1237 | Recirculation pump | Recirculation pump | Shinshinpump.Co., Ltd. | http://www.shinshinpump.co.kr | 1. Outline - Recirculation pump 2. Introduction - Product specifications: - Discharge diameter : 200mm ~ 800mm - Pump capacity : 1.0m3/min ~ 120 m3/min -Total head : 0.2m ~ 2.5m 3. Character - Easy recovery and installation by using a Davit crane. - Adjusting flux is possible by adopting an inverter type electric motor. - Safe operation with an optimum reducer. - Double waterproof with a built -in Junction Box. - Securing of safety due to an explosion- proof type design that meets the standard of the USA and Europe. 4. Application - Drainage for construction works - Urgent drainage for movement - Drainage of water and wastewater - Tunnel construction - For manufacturing of wheel washers |
Equipment |
| 1238 | Recycled Construction Asphalt Process | RASCON Process | Korea Industry Technology Co., Ltd. | http://www.koentech.co.kr/english/ | 1. Outline - The main ingredient of asphalt is imported crude petroleum. and disposing asphalt is tantamount to wasting foreign currency. - If waste asphalt is not recycled. treatment expenses are incurred for its proper disposal. Disposal of asphalt contributes to environmental problems. - The recycling of waste asphalt helps save money and protect the environment. 2. Introduction - After sorting and washing collected waste asphalt from road. subway. electric. gas or telephone infrastructure construction. the waste asphalt is broken up and crushed with a machine. - A fixed quantity of standardized ingredients. 25mm aggregate and stone powder are put in and melted. and RASCON is produced. - When it has been properly mixed. the RASCON is delivered to the construction site. - Paving begins using RASCON. Fig. 1. Process. |
Technology & Process |
| 1239 | Recycled Plastic | TK – 3000 | Taekwangsuji Co. Ltd. | http://taekwangsuji.co.kr | 1. Outline -This company recycles waste plastics and supplies the recycled plastics to the industrial fields. 2. Introduction 3. Character - Satisfactory in coloring. - Excellent in forming processing. - Resistant to abrasiveness and shock. - Excellent mechanical property. 4. Application - Miscellaneous goods. - Toys. - Cosmetics and kitchen utensils and containers. - Home appliances and leisure supplies. - Light fixtures. |
Equipment |
| 1240 | Recycled Water Treatment System | JS-U.V. Recycled Water Treatment System | Jesagi Hankook Ltd. | http://www.jesagi.co.kr | 1. Outline JS Recycled water treatment system make us take recycled water of potables graded since artificial flux maximize self-purification degree and secondary U.V disinfection treatment disinfect harmful microbes. 2. Introduction 2-1. Process of U.V. Recycled water treatment system Fig 1. Process of -U.V. Recycled water treatment system Fig. 2. Process of recycled water treatment (Biological treatment + U.V. disinfection) |
Equipment |
| 1241 | Recycling apparatus | Slurry recycling facility | ENBIO SOLUTION CO., LTD. | http://www.enbiosol.com | 1. Outline Slurry is organic sludge contained in soil. and causes undernourishment by being formed on the floors of rivers from living sewage. factory wastewater. livestock wastewater and farming drainage water. thereby deteriorating water quality and destroying the ecosystem. When this slurry soil is dredged. the dredged soil contains sand of 95∼60%. and can be huge resources if being recycled. 2. Introduction(See fig 1. Attach-1) <Fig 1. Flow chart of slurry treatment> 3. Characteristics (1) It can reduce generated slurry to 5~30%. (2) Sand or aggregates. which are by-products. can be reused. (3) It allows economic and environmentally friendly dredging construction. (4) It can be applied to wide ranges. for example. rivers. lakes. harbors. and so on. 4. Application Slurry dredging work in rivers. lakes. and harbors | Equipment |
| 1242 | Recycling apparatus | Biomass Energy Plant | KENTEC. OPAS Corporation | http://www.kentec.co.kr | 1. Outline Biomass means industrial and living wastes. agricultural and farming wastes. sewage sludge. which are organic wastes. If Biomass is left alone. most of the wastes are simple wastes and cause serious environmental problems. This product is technology to produce high-efficient energy through perfect combustion and thermal decomposition gasification of various wastes. 2. Introduction(See fig 1. Attach-1) 3. Characteristics (1) Perfect combustion through thermal decomposition/gasification type combustion technology → Minimization of a discharge amount of pollutant materials(solution of dioxin problem) (2) Environmentally friendly system in consideration of human life environment → Minimization of odor generation through compression and packing of wastes. and easy safekeeping and transfer (3) Wide incineration range of living wastes. industrial wastes. and so on (4) Increase and decrease of facilities from a small-sized incinerator to a large-sized incinerator by a modulated system → Flexibly increase and decrease of facilities volume (5) High-efficient energy recovery without auxiliary fuel (6) Incineration of moisture containing wastes. and minimization of incineration ash generation by perfect combustion (7) Life of 20 years or more due to use of a small driving part and specific materials (8) Easy operation due to a perfect automation system using a computer 4. Application (1) Local heating and operation of factory (2) Glass greenhouse and fish farm | Equipment |
| 1243 | Low-temperature thermal decomposition apparatus for wasted tire and wasted rubber | R.R.P - 50 | T.R. Environtech Co., Ltd. | http://www.trrecycling.co.kr | 1. Outline This product is a system for dividing and recycling solids and gases by thermally decomposing wasted tires and wasted synthetic rubber at a low temperature. and is economical due to inexpensive process costs. 2. Introduction Collected wasted tires and rubbers are crushed to facilitate decomposition. washed and dried to obtain ash reducing agent of good quality. and then. the crushed fragments are transferred and injected into a preheater. At the same time. catalyzing agent is injected into a catalyzer inlet to progress decomposition. and then. the catalyzing agent is continuously injected till an initial decomposition occurs. When the initial decomposition occurs. the decomposition is continued even though the catalyzing agent is not injection any more. After that. generated gas can be used as heat source if you do not want it in safe-keeping. and gas passing a condenser is kept in a tank as oil. After that. carbon black(C/B) and iron core. which are decomposed to original physical properties. are divided through M/S. and then. packed. safely kept. and delivered. 3. Characteristics (1) Continuous decomposition at a low temperature (2) Generated matters are recovered to original materials (3) It is sufficiently economical due to inexpensive process cost and generated matters (4) It saves fuel costs as using self-produced gas (5) Manufacturing cost is low and life of machine is long as it is decomposed at low temperature. (6) There is no environmental pollution. 4. Application (1) Heavy water facilities combined with biological treatment (2) Water purification and treatment of industrial water (3) Third high-grade treatment of sewage and wastewater treatment process (4) Precondition process of applied water (5) Large-scaled water treatment for sterilization and purification | Equipment |
| 1244 | Recycling equipment | BioTAS | Dure Technology Co., Ltd. | http://www.dure.com | 1.Outline It introduces two-step reaction and hot process that have been developed from existing anaerobic digestion technique. Based upon a BioTAS (Bio Thermophilic Anaerobic-digestion & Simultaneous-nitrification-denitrification) technique that is developed itself as a key technique (being issued with Patent No. 326677). SND-ATAD (Autothermal Thermophilic Aerobic Digestion) using a jet diffuser. anaerobic digestion water containing a high concentration of T-N that is difficult to treat in conventional practices is subject to an advanced treatment. 2. Introduction The anaerobic digestion technique includes the steps of throwing organic wastewater such as livestock wastewater and food wastes into an anaerobic digester. being subject to anaerobic digestion at the state where air flowing is cut for about 10 through 30 days such that 80~90% of organic components are dissolved to generate Biogas having methane gas as a principal component that is used as a power source. and discharging the residual substances as compost. An amount of production of the Biogas provides can be sold as a product through an electric power network as well as the power for operating the treatment equipment itself. Therefore. the present equipment reduces the production costs. and it also provides an environmentally friendly effect since the Biogas is a kind of clean energy that does not increase carbon dioxide (CO2) with the organic wastewater as a biomass. 3. Characteristics 1) Conventional technique includes a single reaction step. but the anaerobic digestion reaction of the present equipment has two-step reaction of acid fermentation and methane fermentation. which are treated in first and second digesters that are operated at different optimal reaction conditions. The acid fermentation reaction is carried out at low pH conditions. and to the contrary. the methane fermentation reaction is very sensitive to high pH conditions. Therefore. the two reaction tanks are separated. thereby accomplishing a high reaction efficiency. 2) A reaction temperature is set at an intermediate temperature (37 °C) in conventional practices. but in the present technique it is set at a high temperature (57 °C). When the reaction temperature increases by 10 °C. the reaction speed increases by two times. which results in the increase of the reaction speed by four times when compared with the intermediate temperature process. The methane transition rate increases by two times. thereby removing the organic components remaining. The pathogenic bacteria and the seeds of weeds in the residual substances in the digester are completely removed. such that they can be safely utilized as compost. 3) Since the anaerobic digestion water contains high concentration of T-N. it cannot be treated with any other technique. Thus. it has not been used in the treatment of livestock wastewater. The present company has developed a new technique (being issued with Patent No. 326677). SND-ATAD (Autothermal Thermophilic Aerobic Digestion) using a jet diffuser that perfectly treats the anaerobic digestion water and discharges it. The high concentration of T-N having a C/N ratio of 2 or less have simultaneous denitrification by keeping ORP as a control parameter at an appropriate level by controlling an amount of fine air absorbed by the jet diffuser by means of PLC at an ATAD digester to which no external carbon source is supplied. without any step of nitrification-oxygen-free denitrification. This is a new technique based upon SND (Simultaneous Nitrification Denitrification) theory that is deviated from material balance of a chemical equation based upon conventional BNR (Biological Nitrogen Removal) theory. 4. Application Treatment of livestock wastewater and food wastes | Equipment |
| 1245 | Recycling Plastics Waste Pyrolysis Machine | Recycling Plastics Waste Pyrolysis Machine | MOTIONKOREA.CO., LTD | www.motionkorea.com | Waste Pyrolysis of waste plastic is the method to restore to oil heating and dismantling used plastics through reverse process of producing plastic products in Petrochemistry industry. Thermal decomposition with low temperature is endothermic reaction system heating wastes indirectly with low temperature (350℃ ~ 450℃) under no oxygen or low oxygen environment and forms unstable radicals with weak linked part being cut first and similar linkage systems being combined randomly and cut. It consists mainly of radical reactions. Cut-off situation of combination happens successively with energy being transferred into combined structure of organic matter through continuous reactions. changes to substance with tiny molecular weight and through this process clean fuel with prominent value is created as environment-friendly resource for less generation of contaminants. | Equipment |
| 1246 | Reducing Valve | Reducing Valve | SHINHAN PRECISION Co., Ltd. | http://www.spic.co.kr | 1. Outline - Reducing valve for waterworks is designed to solve problems caused by the pressure imbalance of supplied water which flows in to each household. This Valve also improves user convenience as the direction of the pipe can be easily changed according to site conditions and it is designed to supply an optimal flow rate at the pressure required by users so this valve system maximizes efficiency by allowing users to use the system under optimal conditions. 2. Introduction 3. Character - Simple structure as there is no nut at the bottom of the valve and no water leak. - Convenient replacement of parts in case parts are damaged for long-term use or freeze and burst in winter season. - Convenient operation with an enough flow rate due to a wide pressure control range and low pressure loss. - Precise pressure control due to an excellent operation performance. - Convenient plumbing due to the installation of a double-jet screw type union pipe nut. - Convenient control for constant pressure due to the installation of a pressure gauge in controlling set pressure. - Convenient handling as this valve is compact and lightweight. - Maintaining stable pressure only after one-time pressure setting. 4. Application - Reducing valve. |
Equipment |
| 1247 | Refrigeration and air conditioning sensor(transmitter) | ROOM Type(A) | Seungil Electronics Co., Ltd. | http://www.sentrol.co.kr | 1. Outline This Temperature & Humidity Transmitter(temperature • humidity converter) converts a value that is obtained by measuring temperature and humidity in a room or duct into 4~20mA or 1~5V which is electric signal and transmits it. 2. Introduction 3. Characteristics -Highly sensitive temperature/humidity sensor ㆍAccurate measurement even in a condition of low temperature. high temperature. low humidity and high humidity is possible due to the use of a highly sensitive electrostatic capacity type humidity sensor and a temperature sensor. - Compact Type ㆍCompact Type with beautiful design which makes this product keep in good harmony with almost all places including office. - International standard current/voltage output ㆍDirect connection to a recorder or a controller with 4~20mA and 1~5V is possible. - High reliability ㆍReliable calibration of error in humidity sensitive elements by a precise humidity generator. - MICOM standard voltage output ㆍDirect connection to MICOM with 0~4V MICOM is possible. 4. Application - Indoor temperature conversion |
Equipment |
| 1248 | Regenerative Thermal Oxidizer (RTO) | Regenerative Thermal Oxidizer (RTO) | Donglim Eng Co., Ltd. | http://www.donglim-eng.co.kr/ | 1. Outline • This oxidizer utilizes a liquid phase catalyst. which reacts with the flowing water-soluble odor gas. It is also ionized to remove VOCs or odor through an oxidation-reduction reaction. 2. Introduction 14Biz-74.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-74.JPG'>3. Character • Its liquid phase catalyst has a semipermanent nature (repetitive oxidation-reduction reactions). • Its stabilizer prevents the decomposition of the ferric chelate. • No secondary pollution • Can carry out consecutive operations • Low operating costs 4. Application • VOCs removal • Odor removal • Air pollution prevention facilities • Incineration plants • Factories • Air pollutants treatment plants |
Equipment |
| 1249 | Sewer Monitoring and Management System | SM5 | Environmental Project Service Solution Inc. | http://www.weps.co.kr | 1. Outline - SM5 (Sewer Monitoring and Management System) can enable guarantee of quality of measurement instruments. easy maintenance. reliable collection/backup of data. different analyses. support for decision-making of sewer pipe programs. estimation/analysis of program effects. and so on. - It is the best technique for construction of a monitoring system of sewer pipes. 2. Introduction - Structure of SM5. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=283_5.jpg></center> 3. Characteristics 3-1. Advantages - Better accuracy through the sectional flow speed measurement method - Excellent countermeasure for flow measurement of box - Double-section flow measurement - Selection of flow gauge appropriate for the condition of the spot (Settling type. floating type. radar type. etc.) 3-2. Main functions 3-2-1. Correction and backup - Correction of errors (Uses hydraulic property curve) - Removal of noise (Moving average and operated moving average) - Improvement false data (ARIMA and seasonal property curve) 3-2-2. Monitoring and warning - Immediate action at failure - UMS function: Telephone. Fax. E-mail. etc. - Warning when the difference between the water levels of flow gauge and verification is large. - Fast action when there is failure similar to ones in the system’s record 3-2-3. Real-time monitoring - Real-time inquiry of each point (Basic status and measurement status) - Checking for failure in the sensor (Additional sensor for measurement of water level and auto-cleaning function) 3-2-4. Inquiry and report function - Inquiry by hour. date. and month - Comparison among points - Reports by week. month. and process 3-2-5. Analysis on program effects - Examination of operation rate of scheme - Analysis on control of additional treatment plant and reduction of cost for maintenance - Analysis on I/I reduction effect and program effect 3-2-6. Analysis on pipe status - Automatic analysis on extension and average diameter of pipes - Acquisition of design data through different search methods - Comparative analysis on CCTV data 3-2-7. MOUSE simulation - Management of pipe network using GIS/CAD - Application of previous domestic hydraulic calculation program - Production of discharge capacity verification and design elements through pipe hydraulic calculation - Analysis on river effluent and pollution load during the raining season through gate analysis of storm overflow chamber and effluent mouse of storm overflow pipe - Database of basic plan for pollution load - Analysis on flood frequency and rainfall condition at confirmed flood regions - Analysis on effluent of each point/watersystem. average concentration of flow load. and pollution load - Water quality modeling within the pipe - Estimation of flood - Application when inducing real-time controller such as wet detention pond and CSOs treatment plants 3-2-8. CSOs analysis - Analysis on overflow. overflow pollution load and water quality through separation during the raining season - Analysis on overflow. overflow pollution load and average concentration of flow load - Different CSOs analysis function . Pollution load per rainfall-area (kg/mm/ha) . Ratio of interception and overflow for max sewage capacity during the dry season . Overflow pollution load per rainfall (kg/mm) . Overflow pollution load per raining time (kg/hr) . Overflow pollution load per raining time-area (kg/hr/ha) - Analysis on initial cleaning coefficient of each pollutant item 3-2-9. I/I link analysis - Pipe tracer (Transient analysis) - Mass balance - Leakage analysis of intercepting pipes 3-2-10. I/I and leakage analysis - Infiltration analysis - Rain inflow analysis 4. Applied field Sewer pipe management industry | Evaluation & Analysis |
| 1250 | Remote control system of environmental monitoring and control process | TM / TC (Tele Metering / Tele Controlling) System | EcoBio Co., Ltd. | http://www.ecobiobiz.com | 1. Outline TM / TC (Tele Metering / Tele Controlling) system is a remote control system to manage and control treatment equipments in real time by data generated during remote environmental treatment process through signal sending and receiving system using modem / domestic network. 2. Introduction TM / TC system is operated by software suited to each condition on the basis of hardware. such as sensors for signifying process data and sending and receiving the data signal. network systems. computer network. and so on. and is installed to carry out a real time management. stastics and analysis of data. and so on (see fig. 1). <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=IMP316-2.jpg></center> 3. Characteristics (1) It secures the optimum operation condition by detecting and decoding system operation data. (2) It can rapidly countermeasure to unexpected danger and error. (3) It has stable processing efficiency. and reduces managing manpower and estimates. (4) Integrated operation of total processes is possible by each terminal through a main operation room or an Internet. 4. Application (1) All systems for minimizing environmentally harmfulness through a stable operation. for example. sewage and wastewater treatment systems (2) Management of waste filled-up-land / seepage water treatment systems (3) Management of systems causing soil pollution(gas station. places for storing and dealing harmful chemical materials) (4) Soil pollution examination and observation well | Evaluation & Analysis |
| 1251 | Remote Reading Gas Meter System | Remote Reading Gas Meter System | DAESUNG MEASURING Co., Ltd. | http://www.dsmeters.co.kr/ | 1. Outline Daesung Remote Reading System is the cutting edge synthesis remote reading system with wireless way. a power line or exclusive LAN. It is easy for installation and maintenance. Furthermore it increases management effectiveness and considers end user’s convenience and field condition 2. Introduction - Industrial PLC(Power Line Communication) + LAN(Local Area Network) Type - Industrial RF(Radio Frequency) + LAN Type - Residential RF + LAN Type - Residential PLC Type - Residential MOBILE RF Type (Connection between each meter and SCU – wire) (Meter with pulse output) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000029-2.JPG><br>Fig 1. Process.</br></center> 3. Characteristics 3-1. Operating Principle - Reed Switch : It is a sensor opened and closed. using a magnetic field. Inside a glass tube. there are 2 magnetic Reed fixed by epoxy molding - Operating Principle : While a Driving Drum turns. Reed Switch is contacted when the magnet attached on the last drum is situated in sensing range. And then a magnetic field is created so that electric signal(10L/Pulse) comes out. This pulse signal goes to an indicator through wire. LCD display the output. - Pulse signal cycle depends on the drum attached magnet. 1 pulse / 1 revolution <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000029-3.JPG><br>Fig. 2. Operating principle.</br></center> 3-2. Specification - Industrial PLC + LAN // RF + LAN Type - Residential RF + LAN // PLC + LAN // Mobile RF Type 3-3. Cautions - When an installer connects the wire. he must follow the wire guide carefully. ※ Wire : 2p(tartaric coating. No.24) normal telecommunication wire - After connecting the wire. an installer seals the connecting part with a shrinking tube (kind of sealing tube) to avoid disconnection. - After installing an indicator. he have to check if it is operated correctly. - If an indicator is found with any error when it is installed and set. a professional worker only do repair and disassemble it. - After an indicator is installed. it must be sealed. 4. Application - Gas meter. Water Meter. Heat Meter. Electric Meter and etc. | Instrument & Chemicals |
| 1252 | Remove Chlorine Shower Head | Remove Chlorine Shower Head | Biocera Co., Ltd | http://biocera.co.kr/ | Product Description Ato-Zero Shower Head keeps in moist & good healthy skin by prevention of skin aging and moisture effect. As well as. it has functions such as Bidet. Spray shower & Saving water by 3 kinds of button mode. So. Ato-Zero Shower Head is good for the adult as well as the weak-resistant baby. especially including the person to suffer from dried skin and skin trouble in maintaining their healthy skin. Product Feature Features 1.It allows you to take a shower with clean water by neutralizing residual toxic chlorine gas. a cancer-causing substance left in tap water. 2.It removes harmful chlorine penetrating into the skin completely when taking a shower or bath 3.It is good for preventing various skin allergies. especially atopic dermatitis. 4.it is good for preventing ticks of pets. 5.It helps to moisturize dry skin like a moisture creme. 6.It helps to prevent depilation and itches on the skin and scalp Product Specification / Models Product Name : AtoZero Remove Chlorine Showerhead Contents : Showerhead including remove chlorine Ceramic filter(1unit). Refill filter(1 unit) Main Components : ABS resin. Chlorine-removing bioceramics and complex far-infrared ceramicston Life time of inside filter : 4 ~ 6 months (exchange one time every 4~6 months) manufacturer : Biocera Co.. Ltd. Application How to Use It is made to connect to other products as made by the international standard. It allows you to check through its transparent film when to refill it. (You can replace it with a new filter after using it for more than 3/4) | Equipment |
| 1253 | ED & EDR system | ED & EDR system | Hankook Jungsoo Industries Co., Ltd. | http://www.haji.co.kr/ | 1. Outline ED is the system which removes and concentrates a dissolved ion and is applied to salt manufacture process and desalination process and EDR may continuously produce the DC power supply as designed to reverse it and removes the pollution of the ion exchange membrane. 2. Introduction - Anion exchange membrane – Charged positively and permeable to anions. - Cation exchange membrane – Charged negatively and permeable to cations. - DC power supply – Induces the ion movement to the electrode direction. - Removal of ion – Ion is removed in the diluting compartment as anion passes through the near anion exchange membrane and cation passes through the near cation exchange membrane. - Concentration of Ion – Anion movement is intercepted by cation exchange membrane after anion passes through the anion exchange membrane while cation movement is intercepted by anion exchange membrane after cation passes through the cation exchange membrane. so the concentrating compartment is formed. |
Equipment |
| 1254 | Repairing Material for Various Purposes (AM-A) | Repairing Material for Various Purposes (AM-A) | BNB Co.,Ltd | www.bnb.kr | <div class=0 style=text-align: left; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>Repairing coating for weld zone. wear zone. reinforcing weakened. maintenance to cracked iron</span></div> <div class=0 style=text-align: left; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>- Repairing coating for machinery. shaft. pump impeller. casing. valve. pump. engine block. oil and</span></div> <div class=0 style=text-align: left; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt>water storage facilities. piping and weld seam.</span></div> <div class=0 style=text-align: left; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> <div class=0 style=text-align: left; -ms-word-break: keep-all; mso-pagination: none; mso-padding-alt: 0pt 0pt 0pt 0pt><span lang=EN-US style=letter-spacing: 0pt; mso-fareast-font-family: 바탕; mso-font-width: 100%; mso-text-raise: 0pt></span> </div> | Water Treatment |
| 1255 | Residual chlorine analyzer | CLX Online Chlorine Monitor | DaAll ENG Co., Ltd. | http://www.daalleng.kr | 1. Outline - Residual chlorine analyzer. 2. Introduction |
Equipment |
| 1256 | Resource recovery system | GSPlatech Co., Ltd. | http://www.adplatech.com/ | 1. Outline Replace incinerators at facilities requiring for large amount of heat source while emitting significant volume of waste. such as paper-mill. textile mill and leather factory. It is environment-friendly and the most effective waste to energy (WTE) system which can produce/supply electricity and steam at the same time and recover high purity hydrogen. 2. Introduction 3. Characteristics - Satisfy environmental regulations for dioxin without installing facilities to prevent pollution - No incineration residue such as bottom ash and flying ash - Minimize space use - Generate electricity and steam - Recover high purity hydrogen and industrial gas 4. Application - Treatment target: Combustible industrial waste such as paper sludge and rejects. textile and leather pieces and synthetic resins - Treatment capacity: Over 50 ton/day |
Technology & Process | |
| 1257 | Resource technology | Pollutant deposit resource technology | Hyundai Institute of Construction Technology | http://www.hdec.re.kr | 1. Outline Reduce the dredging cost by directly processing a large amount of pollutants generated upon dredging a dredging boat and then burying them in a dredging area. 2. Introduction Clean pebbles and sands are separated from dredging pollutant deposits by means of an aggregate re-separating apparatus and separated pebbles and sands are then recycled. Deposits having a large amount of pollutants are additionally separated and are then delivered to a chemical precipitation tank. After calcium compound reacts with the precipitated pollutant deposit while being mixed with it. if the pollutant deposits is oxidized at low temperature (around 600℃). organic compound and nitrogen are removed by oxidization. Further. the coupling force of phosphorus and heavy metal can be high at room temperature. It is therefore possible to effectively prohibit elution of pollutants. Through the above process. the pollutants are removed or prohibited and low-temperature annealing resultants are then buried in the dredging region again.(See Fig 1) 3. Characteristics 1) Since phosphorus. nitrogen. organic compound and heavy metals can be processed or prohibited. it is possible to minimize elution of the pollutants into the water body. The pollutants can be reburied at an original position of a dredging region. 2) No need for the cost from construction of a reclaimed land to the delivery of the pollutants 3) Low maintenance cost compared to high-temperature sintering process 4) Significant high price competitiveness upon processing of dredged pollutant deposits 4. Applications Ocean pollutant deposit landfill | Technology & Process |
| 1258 | Retrofitting of STP for Total Phosphours Removal | Retrofitting of STP for Total Phosphours Removal | Daesin Entech Co, Ltd. | http://www.ds-entech.co.kr | 1. Outline - Our product uses coagulation-floatation process to dispose of suspended solids (SS) and total phosphours (T-P) of reject water which account for 20~30% of sewage plant loads. - Using non-power mixer. coagulating agents are inserted to perform biological treatment. eliminate T-P. and to improve sedimentation. 2. Introduction 3. Character - Apply micro bubble floatation technology to treat reject water with high concentration of suspended solids (SS) and total phosphours (T-P) thereby reducing bio-processing burden. - Use non-power mixer to save energy and chemicals needed for mixing - Improve a BOD/P ratio of water inflow. making biological phosphours removal more efficient. by eliminating T-P of reject water. - Apply micro bubble floatation technology to keep DO concentration of reject water. preventing phosphours outflow from the first sediment site. - Minimize costs for installation and maintenance. - Apply advanced treatment of sewage plant and T-P removal technology. 4. Application - Total Phosphours System. |
Technology & Process |
| 1259 | RO Membrane | RO Membrane | CJK Alliance Co., Ltd. | http://www.water-terminal.co.kr/ | 1. Outline • The reverse osmosis membrane means a thin membrane in which water may pass but ion may not. It had been made of cellulose acetate until 1990s. • However. polyamide polymer. which is proven to be highly efficient with the use of high and low salt rejection. is now used as the main material for reverse osmosis. 2. Introduction 3. Character • High permeate flux and salt rejection • Thin active layer with heavy intensity • Chemically stable in wide range of pH • Long lifespan of membrane and high physical resistance to microorganism • May be used in other forms • Can be operated in wide range of pressure. temperature. etc. 4. Application • Water treatment • Water recycling • Sewage treatment • Seawater desalination | Eco-Friendly Products |
| 1260 | Reverse Osmosis and Excess Filtering System | R/O & U/F SYSTEM | Cheongho Environment Development Co., Ltd. | http://www.cheongho.net | 1. Outline Ultra-filtrating method is semi-dialytically controlled pressure active device that can separate various substances optionally. Undiluted solution for a process passes through a membrane whose pore’s diameter is 10 ~ 20㎛. Therefore. in case size of molecule and molecular weight of certain substance is less than the molecular weight of the membrane. the substance passes through the membrane and cannot be permeated while the substance that doesn’t pass through the membrane is concentrated gradually in the flow of undiluted solution. 2. Introduction 3. Characteristics - Patented synthetic polymer membrane - Chemical and physical stability - Backwashing feasible self-supporting membrane - Operation under low pressure and flow - Unnecessary chemical pretreatment - Constant functions are kept while backwashing 4. Application - In case of using salty water as drinking water - For pretreatment of pure devices -For the Industrial water used in electronics and semi-conductor. pharmaceutical distillation. and nuclear power plant - Industrial water for boiler |
Technology & Process |
| 1261 | Reverse Osmosis Filtering Membrane | Reverse Osmosis Filtering Membrane | Korsan Engineering Co., Ltd. | http://www.korsan.kr | 1. Outline - This product eliminates fine particles. ionic substances and bacteria in water using semi-permeable membrane. When pushing water containing many particles to this semi-permeable membrane with pressure. the particles get filtered and clean water is produced. 2. Introduction 3. Character - Reverse osmosis membrane filters fine particles. ionic substances and bacteria using semi-permeable membrane in inner shell of plants or egg. - There are CTA membrane and TCF membrane according to the material. When pushing water with high pressure to this semi-permeable membrane which has ultra-fine pores sized 0.0001m. only pure water with small molecule weight. dissolved oxygen and small amount of mineral pass through the membrane. - Reverse osmosis equipment can be structured as parallel. serial. mixture or double stage type depending on the quality and use of the source water. - Serial type has high recovery rate and low treated water quality. while parallel type has low recovery rate. but long equipment life. 4. Application - Household and industry - Water purification - Wastewater treatment - Heavy water supply plant |
Instrument & Chemicals |
| 1262 | Reverse Osmosis Filtration Membrane | KORSAN ENGINEERING CO., LTD. | http://www.korsan.kr | 1. Outline • It is a removal system used to eliminate particles in the water. ionic substances. bacteria. etc.. through the use of a semi-permeable membrane. • Particles are filtered and only water goes through a semi-permeable membrane to produce clean water. This process occurs when pressure is applied on the water with lots of particles to push it through the semi-permeable membrane. 2. Introduction 14Biz-120.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-120.JPG'>3. Character • Reverse osmosis facilities can be composed of parallel. serial. mixed. and two-stage types depending on the quality and purpose of the raw water. - Series system: high recovery rate but low treated water quality - Parallel system: low recovery rate but long installed life span - Mixed system: increases recovery rate at most and has a lower concentration polarization - Two-stage system: has a maximum recovery rate and treated water quality. It can lower the concentration polarization but requires a thorough facilities management because of its complicated structure. 4. Application • Domestic and industrial water treatment. wastewater treatment. gray water facilities. etc. |
Eco-Friendly Products | |
| 1263 | Reverse osmosis membrane | Reverse osmosis membrane | CJK Alliance Co., Ltd. | http://www.water-terminal.co.kr | 1. Outline - Reverse osmosis membrane means a thin membrane through which water can pass but ions can’t pass. Reverse osmosis membranes are used to remove pollutants in salt and water a lot because they can remove ions from the solution without phase change. 2. Introduction  http://img.konetic.or.kr/apec-vc/xml/img/market_place/5.JPG'>3. Character - Excellent production and heat removal - Thin active layer with high intensity - Chemically stable in a wide ph range - Long life of a membrane - Good resistance to microorganisms. - Wide range of operation. 4. Application - Reverse osmosis membrane |
Technology & Process |
| 1264 | Reverse Osmosis Membrane RO | Reverse Osmosis Membrane RO | MEMB FLOW Co., Ltd. | http://www.membflow.com/ | 1. Outline - This RO(Reverse osmosis membrane). with the diameter of 0.001 to 0.0001um. has the membrane capable of removing ion molecules and employs a reverse osmosis property to separate solvent “water” from salty solution by applying high pressure. 2. Introduction 3. Characteristics - A spiral-wound module contains a leeway to get produced water to flow between membranes in the shape of envelop that has only one entrance. - By inserting a spacer mesh made of polypropylene between membranes. it increases a turbulence to increase the ability to transport substances and reduce density polarization. - A module contains supporters between two membranes. After accumulating a net type of Spacer outside of the membrane. roll it up in the form of Roll Cake. - If pressure is applied to high density of water so that the water may pass through a semi-transparent membrane. pure water. persistent oxygen and a very small volume of minerals with small molecular weight can pass through the semi-transparent membrane. - Ionized soluble substances and floating materials may not pass through the semi-transparent membrane and are instead discharged into waste water under pressure added by inflowing water. 4. Application - Pure water manufacturing - Washing water such as coating. semi-conductor and optics - Drinking water - Fresh sea water - Liquid enrichment |
Equipment |
| 1265 | Nanomembrane System | Nanomembrane System | Dure Technology Co., Ltd. | http://www.dure.com | 1.Outline When high salinity of water and pure water that lay a membrane between them come into contact with each other. the pure water is absorbed to the high salinity of water via the membrane. At this time. the pressure applied to the water absorbed is called an osmotic pressure. If a force of more than the osmotic pressure is applied to the high salinity of water. the pure water is pushed from the high salinity of water to itself. In this case. the salt in the high salinity of water is not filtered through the membrane. which is called a reverse osmotic pressure. Using the principles. a technique where foreign materials such as the salinity or organic materials dissolved in the supplied liquid are filtered is embodied by using the present membrane system. 2. Introduction The membrane is made of synthetic resin such as cellulose acetate (CA). polyamide (PA). and polysulfone (PS). The CA has been used for desalinating seawater since a synthetic membrane was at first developed at UCLA in 1958. Exhibiting excellent chemical resistance and heat resistance. the PS is greatly used for chemical process and wastewater recovering process. The membrane is divided into spiral. tubular. and hollow fiber ones according to its structure. In case of the spiral type membrane. a spacer is inserted between the membranes and rolled to become a cylindrical shape. The water filtered between the double folds of synthetic film gathers to the central portion of the cylinder and discharged there from. The supply water is passed through the cylinder and concentrated. The area of membrane per the unit volume is large. which is economical. In case of the tubular type membrane. some each having a diameter of about 10 mm are inserted into a housing of about 100 mm to make a module. The area of the tubular type membrane is smaller than that of the spiral type membrane. but it is easy to conduct a cleaning process. thereby reducing the membrane fouling. In case of the hollow fiber type membrane. it is made of a bundle of hollow fibers having a diameter of about 1mm. and the area of this membrane per unit volume is about 80 times as high as that of the spiral type membrane and the flux is 1/60. so that an amount of water permeated per unit volume is about 1.3 times as large as that of the spiral type membrane. The diameter of the tube is so small that this type membrane has the fouling larger than the spiral type membrane. In case of nanomembrane. it is used to separate divalent metal ions and the organic materials between MW300 and MW10.000. recover the metal ions in the plating cleaning water. recover the effective components in the manufacturing process. and remove COD from the waste water. 3. Characteristics 1) Relatively small installation area 2) Operating in fully automatic manner 3) Simple maintenance 4) Complete removal of suspended solids 5) Elimination of viruses and bacteria 6) Recovery of effective components in non-thermal technologies 4. Application Heavy water facilities. waste water recycling facilities. effective component recovering facilities. liquid dye desalinating facilities. seawater desalinating facilities. heavy metal removing facilities. refractory waste water treating facilities. pure water manufacturing facilities. drinking water purifying facilities | Equipment |
| 1266 | Reverse Osmosis System | Reverse Osmosis System | GNG Co., Ltd. | http://www.ourgng.co.kr/ | 1. Outline • This is a filtration system that uses screening and diffusion principle in which wastewater is treated by passing the reverse osmosis (RO) membrane at constant pressure. 2. Introduction 14Biz-66.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-66.JPG'>3. Character • Available for the removal of 95% of total dissolved solids (TDS) and other matters using the RO membrane • Can be widely applied for the treatment of different types of water. including seawater. groundwater. and stream water. because of its desalination function • Available for the removal of 95% of organic matters and fine particles • Available for the removal of 99.9% of particulate matters • Allows the desired water quality to be easily obtained because of its simple structure • Easy to operate. control. and maintain as an automatic system • Does not require additional wastewater treatment process for effluent • Reduction of power costs and extension of the RO service life span resulting in low operation costs when the system is equipped with an energy-saving device • Can be installed in a relatively small area and in a short period when the system is equipped with an RO membrane with great volumetric efficiency 4. Application • Manufacturing facilities for semiconductor purified water • Manufacturing facilities for food process purified water • Manufacturing facilities for chemical process purified water • Manufacturing facilities for other types of purified water Manufacturing facilities for pharmaceutical and medical distilled water |
Equipment |
| 1267 | Reverse Osmotic Pressure Device | Reverse Osmotic Pressure Device | RO-KOREA Co., Ltd. | http://www.ro-korea.co.kr/ | 1. Outline - This RO Korea’s reverse osmotic pressure device is designed to unselectively remove solid substances that remain ionized in water through a semi-permeable membrane. 2. Introduction 3. Characteristics - Inorganic substances are more separable than organic substances. - Electrolytes are more separable than non-electrolytes. - In case of electrolytes with a high electric charge. they are highly separable. - An inorganic ion removal rate may change depending on a hydration value of the ions involved and the radius of hydration ions while large-sized ions are easy to remove. - In case of non-electrolytes. they are easy to remove when the size of the molecules is large. - While gas salts are easy to filter through the screen. ammonia. chlorine. carbon dioxide. oxygen and hydrogen are less likely to remove. - Weak acid is less likely to remove. 4. Application - Reverse osmotic pressure |
Equipment |
| 1268 | RHC Concentrator | RHC Concentrator | BOIL TECH CO., LTD | http://www.boiltech.co.kr/ | 1. Outline This RHC Concentrator is an efficient and compact device with a 2.5 times treatment capacity of a general concentrator by integrating an evaporation tank and an ejector. 2. Introduction 증발기 evaporator. 순환펌프 circulating pump. 농축액 concentrate. 진공펌프 vacuum pump. 냉각수 cooling water. 원액 undiluted solution. 응축수 펌프 condensate pump. 응축수 condensate 3. Characteristics - Significantly reduce the operation cost by applying an ejector used only for a concentrating device - Save energy by integrating a high-efficiency evaporation tank based on the thin film evaporation 4. Application - Drainage of plating industry sewage - Drainage of sodium sulfate - Collection of hydrochloric acid - Treatment of leachate - Collection of TMAH - Collection of boric acid - Collection of iodine. oil (water soluble cutting oil) - Collection of water |
Equipment |
| 1269 | RHC/VVCC-F/STC-F Concentrator | RHC/VVCC-F/STC-F Concentrator | BOIL TECH CO., LTD | http://www.boiltech.co.kr/ | 1. Outline This RHC/VVCC-F/STC-F Concentrator is a flash-type concentrating device suitable for the treatment of high-viscosity slurry waste water. It is suitable for the concentration of liquids when pollutant sediments are easily deposited in the heat exchanger. and can be used to make highly-concentrated liquid by applying a flash tank at the back of the concentrator. 2. Introduction 순환펌프 circulating pump. 원액 undiluted solution. 응축수펌프 condensate pump. 응축수 condensate 냉각수 cooling water. 진공펌프 vacuum pump 3. Characteristics - Respond to high-viscosity liquids by combining with a VVCC concentrator and a RHC concentrator - Reduce operation cost by combining a heat pump or an ejector 4. Application - Collection of oil (water soluble cutting oil) - Collection of phosphoric acid - Collection of hydrochloric acid - Drainage of coolant - Collection of caustic soda - Collection of TMAH. and drainage of solvent - Collection of iodine. drainage of salt |
Equipment |
| 1270 | RIBBON MIXER | RIBBON MIXER | Hankook P.M Eng Co., Ltd. | http://www.topcrusher.co.kr | 1. Outline - Low speed rotation of ribbon shaped-mixed wings inside fixed U-shaped container lead to transportation mixing and shear mixing. - Ribbon is designed to move to right. left and in reverse at the center when rotating. - RIBBON is designed to be arranged in two rows inside and outside to maximize dispersion. - Inside RIBBON is transported to the right and left of mixer while outside RIBBON send materials to the center for prompt mixing. - Degree of mixing can be adjusted by the number of ribbon rotation. shale and time. It is designed for smooth operation of end of the RIBBON. - Lower outlet of MIXER is located in the center for fast and smooth discharge of mixed materials. 2. Introduction 3. Characteristics - Crushed particles do not leak. - Simple design makes it easy to use the machine. - Easy maintenance. cleaning. part replacement. - Convenient automatic process of input and output - It enhances productivity thanks to short operation time. - It saves costs as it is possible to process large volume with small size machine. 4. Application - Powder+powder. powder+granule. granule+granule |
Equipment |
| 1271 | Ribbon Mixer | Janwoo Machinery Co., Ltd. | http://www.jangwoo.com | 1. Outline - It consists of U shaped body and ribbon shaped driving shaft. The materials in the tank are mixed. moving right and left along with the ribbon shape. as the shaft is spinning. Ribbon shaped shaft has one spiral. double spiral and triplication spiral and it can be chosen depends on the kind and amount of material. 2. Introduction 3. Characteristics 4. Application - Mix organic and non organic supply device of power - Mix pigment/dye and liquid resin - Mix resin with non organic matters - Mix abrasive and resin - Add mixture of cosmetics and detergent materials. mix drug medicine - Mix powdered composition and seasonings - Mix pesticide emulsion and excrement - Mix neutralizing agent and polymer coagulant - Mix ceramic divisions. mix fine resisting materials |
Equipment | |
| 1272 | Ring Joint Gasket | Ring Joint Gasket | Kukil Corporation | http://www.kukil.co.kr | 1. Outline - This product can be used in the Process Line pipes of high temperature and pressure steam. oil. gas. and solvent. Also. the product is used at the range of a vacuum state to up to over 1000kgf/cm2 of high-pressure steel gas cylinders. towers. and valve bonnets. 2. Introduction 3. Character 4. Application - High-pressure steel gas cylinders. valves and towers. |
Equipment |
| 1273 | River Purification Technology | River Purification Technology | Hyundai Institute of Construction Technology | http://www.hdec.re.kr | 1. Outline A river direct purification technology is a method of directly purifying rivers by removing organic materials and nutrient salts in water through suction. ingestion and decomposition of river water that are seriously contaminated. 2. Introduction A river environment purification system allows seriously contaminated river water to be introduced into sedimentation basin using a gravity flow or a pump. thus removing materials having a high specific gravity. River water passes through a lightweight aggregate and a waste tire chip filler so that a chance of precipitation is increased. Suction. ingestion and decomposition of river water by microorganism are facilitated to remove organic materials and nutrient salts in water.(See Fig 1) 3. Characteristics 1) Secure economical efficiency by recycling of waste matter 2) Allow processing and operation in a short stay time (1.7hr) 3) Stability and persistency of the capability of purifying water quality (BOD: 50~83%. SS: 83~95%. TKN: 86%) 4) Easy maintenance management 5) Safe in case of flood 6) Purification system is laid the terrace land on the river of the river and an environment-friendly park can be constructed. 4. Applications 1) River environment construction business 2) River direct purification | Technology & Process |
| 1274 | RO Equipment | RO Equipment | WIT Co., Ltd. | http://www.waterit.kr | 1. Outline - Reverse osmosis principle ㆍ Inversely with the osmosis membrane effect. this reverse osmosis method obtains low concentration liquid by imposing artificial pressure on high concentration liquid. The method requires equipment capable to impose high pressure. 2. Introduction 3. Character Membrane - Wide membrane in each module. high permeate flux. compact equipment size and low cost. - Place a water flowing supporter on a flatsheet membrane and laminate the surface of the membrane with a fishnet-shaped spacer. and then roll them into a roll cake shape. - Since this system has a narrow flow path with a diameter under 700um. proper pretreatment process is required. - The spacer used for the system stimulates turbulent flows. However. when treating high concentration slurry substances to obtain production water. the slurry particle can adhere to the membrane. In that case. cleaning of the membrane is important to recover the treatment performance. 4. Application - R/O facility |
Equipment |
| 1275 | RO Membrane | CJK Alliance Co.,Ltd. | http://www.water-terminal.co.kr/ | 1. Outline - Along with water deficit and water pollution. reverse osmosis is used on reusing waste water. groundwater and treating industrial water for getting clean water. It is also applied to certain ions. classifying. refining and concentrating the solvent field. 2. Introduction 3. Characteristics - High permeate flux and salt rejection - Thin active layer with high intensity - Safe in chemical aspect with broad ph range - Long lasting layer - Resistant to microorganism - Used in different forms - Broad range of operation such as compression and temperature - Economical system 4. Application - Tap water use - Brackish water use - Low pressure use - Fouling resistant use - Seawater use - Residential use - Ultrapure water use - Nanofiltration membrane - Ultrafiltration membrane |
Equipment | |
| 1276 | RO Separation Membrane | RO Separation Membrane | Jeong Woo Environmental Technology Inc. | www.koreambr.co.kr | 1. Outline High-quality reclaimed water can be produced and used for industrial water. ultrapure pretreatment water and etc. by installing a RO Separation Membrane in the latter part of an Anaerobic MBR Filtration Process. Submerged-Type Membrane Filtration Process and Pressure-Type Membrane Filtration Process in order to remove ionic substances. chromaticity. odor. fine turbidity. salinity and etc. in reclaimed water. 2. Feature - Good separation characteristics for inorganic substances and electrolytes - Little recovery of reclaimed water caused by condensed water - High operating costs due to an operating pressure of 20 to 50kgf/cm2 3. Introduction MBR 여과수: MBR Filtration Water. 물재이용수: Reclaimed Water 4. Application - Reuse of treated sewage water - Water for industrial process - Ultrapure pretreatment water |
Equipment |
| 1277 | Ro System | Woongjin Chemical Co., Ltd. | http://www.membranes.co.kr | 1. Outline • This is a facility that purifies water by removing materials dissolved in the water. such as particles. ionic substances. and bacteria through reverse osmosis 2. Introduction 14Biz-22.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-22.JPG'>3. Character • In comparison with other devices. this is better in terms of performance. convenience. and economy. • Its reverse osmosis facility may be constructed in parallel connection. serial connection. mixed and two-level type. depending on the quality and purpose of the source water. • The combination of the physiochemical properties of the membrane of the material to be separated. and the pressure difference between the two form the driving force. 4. Application • Manufacture of drinking water seawater desalination • Manufacture. concentration and recovery process of ultra-pure and purified water • Manufacturing commercialization of ultra-pure water for semi-conductors and electronic processes |
Equipment | |
| 1278 | RO System | RO System | WIT Inc. | http://www.waterit.kr/ | 1. Outline • This system treats the water of food. cosmetics. electronics. semiconductors. and nuclear power generators; water for diverse experiments; and industrial water. 2. Introduction 14Biz-164.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-164.JPG'>3. Characteristics • Osmosis membrane: When there are high- and low-concentration fluids between membranes at the same time. low-concentration fluids flow in an equilibrium state. At this time. the membrane that fluids pass through is called the “osmosis membrane.” and this circumstance is osmosis membrane. • Reverse osmosis: From the principle of osmosis membrane. it is the method to obtain low-concentration fluids by applying artificial pressure to high-concentration fluids reversely. It requires a device to apply pressure with high pressure. and this device is widely used for the preprocessing facilities of a pure water manufacturing system and a seawater desalination system. 4. Application • Turns briny water into drinking water • Water for everyday use • Preprocessing of an ultrapure water manufacturing system • Separation and concentration of food. juice. dairy products. and enzymes • Distilled water of electronics. semiconductors. and pharmaceuticals • Nuclear power plant water • Medical purposes and all sorts of experimental water. such as hemanalysis in hospitals • Industrial wastewater recycling • Boiler water • Industrial water treatment • Manufacturing water of food. soda. and cosmetics |
Equipment |
| 1279 | RO System (Reverse Osmosis) | Innomeditech Co., Ltd | http://www.innomeditech.co.kr | 1. Outline • Process to produce treated water by excluding ionic substances dissolved in solution from high concentration to low concentration with driving power in semi-permeable membrane and by passing only pure water 2. Introduction  http://img.konetic.or.kr/apec-vc/xml/img/market_place/6.jpg'>3. Character • Easy to automate due to easy designing and scale-up of process and simplification of equipment and operation thereof • No phase change according to process • It may be applied to a process with wide range of application and small temperature change • Be able to separate specific substances by a function of membrane materials • No influence of shock loading on the quality of treated water • Be able to remove dissolved ion up to 95 to 99% as well as at least 99% of bacteria. particles with 250 or more molecular weight and organic matters 4. Application • Water treatment. effluent treatment • Chemical industry • Pharmaceutical industry • Textile / Dyeing industry • Surface treatment and machine industry • Dairy / Fishery / Livestock • Food processing industry |
Equipment | |
| 1280 | RO(Reverse Osmosis) | Meerae Engineering Co., Ltd. | http://www.forfuture.com | 1. Outline The movement between two types of solutions with different concentration levels will be balanced once they reach the critical point. The critical point means that there is no solvent movement between high-concentration solution and low-concentration solution. which is caused by osmosis. The pressure head of high-concentration solution from the osmosis is called osmotic pressure. If a bigger pressure than this osmotic pressure is applied to high-concentration solution. it will cause a movement of pure solution with no solute passing through semipermeable membrane. The pressure from this movement is called reverse osmotic pressure. and the device using this phenomenon is called Reverse Osmosis System (R/O System). This system is widely used for saline water conversion and reuse of wastewater to save energy. and it is widely applied in electronic and pharmaceutical fields. especially to obtain high-purity pure water at semiconductor industries. 2. Introduction 3. Characteristics - Energy saving separation unit - Optimized equipment for concentration and recovery - Concise structure - Simple operation and maintenance 4. Application - Pure water and ultra pure water sector: Saline water conversion. pre-treatment of service water. desalination. manufacture of ultra pure water - Wastewater recycling: Recycle as process water - Dairy. marine. and stock raising sectors: Recover lactose from cheese. separate and concentrate amino acid from drainage from fish and meat process - Food processing sector: Drainage treatment of soy milk lactose. vegetable juice. concentration of fruit juice. wine processing. concentration refinery of sugar solution. drainage treatment of starch industry. concentration of coffee extract - Pharmaceutical industry: Remove pyrogen. concentration and refinement of herb medicine. manufacture medical and pharmaceutical water - Chemical industry: Drainage treatment of petrochemical industry. recover valid matter from drainage of photo industry. recover lignin from pulp wastewater - Textile. dyeing industry: Recover dye from dye wastewater - Surface treatment and mechanical industry: Treatment of containing drainage. recover aluminum electrodeposition paint. recover valid metal from paint wastewater - Water treatment. drainage treatment: Treatment of sewage and building drainage. treatment of ion exchange regenerant. treatment of radioactive wastewater. hospital. laboratories |
Technology & Process | |
| 1281 | ROEDI System | ROEDI System | BECK Corporation | http://www.ibeck.co.kr | 1. Outline • Reverse osmosis membrane (RO) and ultrapure-water manufacturing by EDI is a system that produces highly purified water using an ion exchange membrane. an ion exchange resin. and electricity. 2. Introduction 14Biz-116.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-116.JPG'>3. Character • Advantages - It is a stable and advanced manufacturing system capable of producing highly purified water. - It has a high recovery rate of supply water of up to 95%. - It is highly economical due to its diverse standardization and miniaturization. - It produces diverse sizes by increasing or decreasing many stacks depending on the capacity of the system. - It is easy to operate and maintain. - It can be used as a diverse standard stack system to adapt to the requirements of many different flow rates. • Disadvantages - EDI raw water must have a higher quality than RO water (1 ppm as CaCo3). - The removal efficiency of raw water that is disqualified for the standard decreases rapidly. - The flow rate of EDI raw water must be constant. - The pressure of the production chamber should be maintained 5–10 psig higher than that of the concentration chamber. If not. ions transited to the concentration water will move to a production reactor. 4. Application • Semiconductor cleaning water. production of pure water for pharmaceutical and bio-industry processes. production of pure water for power plant facilities. industrial ultrapure-water production facilities. battery manufacturers. and other plating companies. |
Equipment |
| 1282 | Roll Control Filter (RCF) | Roll Control Filter (RCF) | Joeun Environment Co., Ltd. | http://www.rcf.kr | 1. Outline - Roll Control Filter (RCF) is a technology that controls filtration efficiency and filtration rate by controlling the winding number of filter fibers (thickness of filter fibers). A filtration process is performed through the formation of a filter layer by winding filter fibers around a filter roller (a cylinder made up of filter holes). Accordingly. Roll Control Filter is an innovative technology that exceptionally reduces backwash water amount and provides long filtration time and high-efficiency filtered water quality compared to filtration devices by other manufacturers as the Filter continues to perform filtration without backwashing for the number of winding filter fibers. 2. Introduction 3. Characteristics - Maximizing continuous filtration time - Minimizing the amount of backwashing water - Superior backwashing efficiency - Controlling the degree of filtration accuracy - Excellent product applicability 4. Application - Filter |
Equipment |
| 1283 | Roller type sludge collector | Roller type sludge collector | Ever Tec Co., Ltd. | http://www.evertec.kr | 1. Outline - As a rope-driving type. the each scraper of two water roads remove the sludge with advancement and back by turns. - As the scraper for removing sludge reaches the end of water road. it is rotated by the arm roller with being opened and closed. The closed scraper sticking to the bottom is moving forward and the opened scraper is moving backward. 2. Introduction 3. Characteristics - There is not underwater cartridge so there is not a precipitated sludge on it. - There are not breakaway and rollover because it does not use the conventional underwater cartridge or ground rail. - It can travel the scraper up and down and left and right by only driving saddle. - It can collect scum on the surface of water simultaneously. - The maintenance is effective due to the simple structure. - It can operate with only one scraper irrespective of the length and width of settling pond. 4. Application - Water purification plant - Sewage treatment plant - Sludge collection of rectangular settling pond |
Equipment |
| 1284 | Rota-Cut | Rota-Cut | Dongyang Pump Co. Ltd. | www.dylobepump.com | 1. Outline - This Vogelsang Rota-Cut improves productivity by protecting the apparatus in the follow-up process and effectively crushing solids according to required sizes so that it eliminates difficulties in the process which are caused by foreign substances in fluids such as pieces of plastic. pieces of rubber clothing. vinyl. strings. wood pieces. bones and spoons and an elevation angle. 2. Feature - This Rota-Cut can separate thick and coarse substances. - An easy and quick replacement of a blade is possible without the disassembly of piping. - This Rota-Cut is equipped with a mechanical seal that does not need sealing water. - Both sides of a screen can be used. - The opening and closing of a driver unit is convenient thanks to the use of an air pressure spring. - This Rota-Cut employs a hydraulic system that maintains a constant space between the screen and the blade. - This Rota-Cut can cut solids into various sizes according to the shape of the screen. - Easy and quick repair is possible. 3. Introduction 4. Application - Solids Crushing |
Equipment |
| 1285 | Rotary Drum Screens | RDS-001 | Blue whale | http://www.bluewhale.co.kr/ | This product is used for solid / water separation which usually consist of more dense particles that need to be removed from the effluent. The effluent enters the inside of the rotating drum through the feed inlet and then passing over the distribution weir on to the drum surface. The particles and water separate as the drum rotates with the solids staying on the screen and passing down the length of the drum helped by internal flights or a continuous scroll. The solids will then discharge into a skip or other machinery for further treatment. The screened liquid travels through the drum before leaving through the liquid outlet at the bottom of the machine. The RDS machine also contains an external pressurised water spraying system to help keep the drum clean and avoid clogging. | Equipment |
| 1286 | Rotary Lobe Pump | Rotary Lobe Pump | Dongyang Pump Co. Ltd. | www.dylobepump.com | 1. Outline - This product has an unsurpassed performance in transferring fluids as it features transfer of fluids with viscosity and high concentration like syrup in the water. transfer of large solids and fluids containing air. high efficiency operating capacity. low operating cost and high suction power. 2. Feature - These pumps are not affected by no-load rotation. - These pumps show an excellent self-priming capability. - Normal rotation and reverse rotation is possible without pipe replacement. - Fluids without pulsation are transferred by using the HiFlo lobe. - The life span of a lobe is extended through housing adjustment. - These pumps are equipped with a mechanical seal in the shape of a cartridge. - Easy and quick repair is possible. 3. Introduction 4. Application - Fluid Transfer |
Equipment |
| 1287 | Rotary Valve | Duck Young Engineering Co., Ltd. | http://www.dyeco.co.kr/ | 1. Introduction 2. Characteristics - As the interval between a rotor and a casing. air consumed amount is little. - Convenient CIP suitable for food producing process - In performing CIP and maintenance. guard rails are installed in considering safety for workers - Specially purposed products can be manufactured. 3. Application - Components such as hopper. silo and mixer where powder and granule are discharged stably - Air transferring line. quantitative powder and granule input line - Quantitative supply and air lock in inputting the raw materials such as powder and granule |
Equipment | |
| 1288 | ROTARY VANE PUMP | CJK Alliance Co., Ltd. | http://www.water-terminal.co.kr/ | 1. Introduction 2. Characteristics - Compact vane pump for middle-high pressure - Excellent absorption function and long lasting system - Optional bypass and filter - International accreditation and NSF - Calm operation with little noise and small installment area - High quality with stainless and bronze substances 3. Application - Soft drink distributor. espresso machine. cooling with reverse osmosis method. cooling circulation system. fuel injection. and compact industrial water purifier |
Equipment | |
| 1289 | Rotating disc automatic filter | Rotating disc automatic filter | Asia Pacific Water Technology Inc. | http://www.apwtech.co.kr | 1. Outline - Rotating disc automatic filter 2. Introduction 3. Characteristics - The backwashing water is produced by 2-3% of inflow water. - The backwashing time is short within 10 - 15 seconds. - It is available to be installed at any place due to the small installation space. - The suspended solids is washed completely during the backwashing. - It is stable and convenient with precise filtration grade. - It is semi-permanent durability. - It secures the economic efficiency by cheap installation cost. - It is effective with various functional module. 4. Application - Making fresh water for ship to filter the sea water - Filtration of ground water and rainwater - Filtration of river and pond - Filtration of suspended solids of farm - Filtration of cooling circulation water of cooling tower - Filtration of settling materials of agricultural water - Filtration of spray nozzle |
Equipment |
| 1290 | ROTO GRIND | DONG IL INTERNATIONAL LTD | http://www.i-dongil.com/ | 1. Outline This Rotating Grinder is a device reducing the size of materials in an effective and rapid way. It makes materials better for the next process or sale. Adopting the cutting-edge single rotor technology. it can be used for plastic. glass fiber. paper. textile. fiber. wood. electronic parts. cable scraps. and wires. 2. Introduction 3. Characteristics - Applicable to various industries because of its excellent performance of achieving the greatest volumetric reduction - Reduce power consumption and noise significantly compared to other similar processing devices - Ideal to make wastes into energy - Visible hand-free operation - Improve the productivity remarkably for the next process 4. Application - Recycle plastics |
Equipment | |
| 1291 | Rotation type Screw | FE-P | Fine Etech Co., Ltd. | http://www.fineetech.co.kr | 1. Outline - A structure in which organic waste is passing through the gap between rotor and drum by the rotation of screw rotor. solid-liquid is separated through compressed strainer mesh on the rotation wing of conical screw rotor. food waste is transferred from low pressure part to high pressure part in low speed by the rotation wings of screw rotor. and excessive starch is not exposed to the seceded liquid. Rotate the drum by main body’s driver to enhance the dehydration efficiency for passing through the liquid waste without clogging of mesh by simple shower system. show high dehydration efficiency. and cake of appropriate amount and proper moisture content is discharge out of the outlet. 2. Introduction 3. Characteristics - High solid retrieval efficiency of more than 60% - Dehydration efficiency is excellent by differential rotation compared to other systems so as the water content is no more than 70% - Dehydration efficiency is enhanced as mesh clogging is prevented with automatic high pressure cleaning by the shower system while drum is rotating. 4. Application - Food waste recycling facility - Livestock excretion treatment facility - Polluted/waste water treatment facility - Sewage treatment facility. etc. |
Equipment |
| 1292 | Roto-Sieve Drum Screen | RS_D100 | Chung-Nam Industry | 1. Outline The screen is capable of screening down to 0.6mm and due to its enclosed design there is no chance of bypassing making it the perfect choice for protecting membranes. Flow rates vary according to the perforation size of the screen but model capacities range from 1-290 l/s. The screening drum is manufactured from stainless steel perforated plate with a choice of perforation diameters from 2.5mm down to 0.6mm. Influent is delivered to the inside of the drum. The drum rotates on trunion wheels and is driven by an external cog gear motor mounted out of the flow. As the drum rotates fluids pass through the perforations and forward to treatment. Solids are removed and dewatered from the drum by a fixed blade augur. Screen cleaning is effected by means of a rotating brush and spray system. The Roto-sieve is fully enclosed to prevent splashes and comes equipped with a spigot connection for odour control if required. 2. Characteristics The Roto-sieve is also used in a variety of other applications including: - Sludge dewatering. Pulp and Paper Mills. Poultry. Fish Processing. Vegetable Preparation. Slaughterhouses etc. The Roto-sieve screen is now available in the UK exclusively from CSO Technik who are able to supply a complete turnkey package including. shaftless conveyors. screw presses. control panels. diverters etc. | Equipment | |
| 1293 | Rough & Fine Particles Remover | Rough & Fine Particles Remover | YT Co., Ltd. | http://www.envi2000.co.kr/ | 1. Outline • This equipment is installed on the water channel of the entrance part of sewer treatment plants to prevent impurities from flowing into the plant. • This equipment can transfer the removed impurities when interoperated with conveyors. • It is designed and installed to operate automatically. reacting to the water level difference between the front and rear of the screen component. 2. Introduction 14Biz-32.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-32.JPG'>3. Character • As this equipment operates automatically by measuring the difference in water level. it saves energy and is thus economical. • When a large quantity of impurities is present in the inflow. the operating speed can be controlled to provide highly efficient processing. • The equipped overload device is able to solve momentary inflow overload. • Automatic operation control saves labor costs. • As impurities are removed by a rake. screen clogging does not occur. • Depending on the condition of the site. installation can be customized by selecting between a Trash Car Type and a Hanger Driving Type. • Optimized particle removal efficiency through proper installation • Minimal noise 4. Application • Sewer treatment • Water purification |
Eco-Friendly Products |
| 1294 | RPF Combustion Burner | RPF Combustion Burner | NEOWON Co., Ltd. | http://www.neoone.co.kr/ | 1. Outline - RPF is solid fuel produced through the selection. crashing. pulverization and molding of combustible PE and PP. It refers to fuels in the category that meet the quality control standards announced by the Ministry of Environment. It uses a squeezing. heating and friction method to solidify and use wasted plastic as the fuel. It contains more than 60 percent of plastic materials and is 50mm wide and 100 mm long to produce more than 6.500kcal that belongs to the 1st grade category. 2. Introduction 3. Characteristics - Capable of combusting various fuels - Applicable in a wide range - Capable of automatically inserting fuel - Rotational method - Specialized structure - Applying carbonization fuel intake mouth - Binary combustible air - Economic feasibility 4. Application - New and renewable energy |
Equipment |
| 1295 | RPS system | RPS system | Gentro Co., Ltd. | http://www.gentro.co.kr | 1. Outline - Advanced sewage/wastewater treatment method improving the activated sludge method and contact oxidation method - Advanced treatment process to treat the sewage and wastewater efficiently within 0.5 - 6 hours by installing the roll pipe containing the microorganisms contact material underground and on the ground. - New concept advanced treatment technology strengthening the actual efficiency based on the biological treatment technology. - Next generation advanced treatment technology designed to strengthen the economic efficiency and treatment efficiency as a hybrid advanced technology using RPS(Rolled Pipe System) - It is available to install and repair easily with small area and cost by optimizing it for the small and medium sewage/wastewater treatment such as village treatment facility. - It is a perfect plug-flow treatment process to remove the nutrients such as T-N and T-P and organic materials such as BOD. COD and SS through flowing the inside of RPS successively. 2. Feature - Strong to the change of flux and water quality. - It is rarely influenced by the change of flux and water quality. If the supply of inflowing water is stopped. it is soon recovered because some microorganisms survive by self-oxidation. - High treatment efficiency in the low temperature. - If the low temperature sewage is flowed in. the treatment efficiency is maintained stably because the diversity of microorganisms is maintained. - Excellent solid-liquid separation and settling efficiency. - Dewatering sludge and discharged sludge have a large amount of microzoon so the solid-liquid separation is well performed. There are non-bulking and speedy precipitation. - Excellent treatment efficiency during the low concentration wastewater. - Low concentration below BOD 50mg/L is treated stably and it used as an advanced graywater treatment process recycling the treated water of the conventional sewage treatment plant. - Little sludge emission. - Reduction of sludge emission due to the long retention time of solids. - No odor. - The odor is not discharged outside due to the sealed type circulating structure. 3. Introduction 4. Application - Treatment process of household wastewater. sewage. industrial wastewater and livestock wastewater - Application for the newly established and retrofitting facility - Application for the reused water and recycled water |
Equipment |
| 1296 | RTO | RTO | Sejin Environment Co.,Ltd. | http://www.sejinenv.com | 1. Outline - RTO minimizes auxiliary fuel consumption and generates non-toxic pure air by combusting odor and VOC gas. This RTO. a regenerative combustion system. applies a direct heat exchange method using heat storing reagents to perform an over 90% heat recovery rate and to reduce fuel consumption. It is an economical combustion system with a high energy-save effect. 2. Introduction 3. Character - High treatment efficiency. - High heat recovery rate. - No restraint in installation location. - No pressure change. - Less generation of additional pollutants. - Save fuel cost by applying a waste heat use system. 4. Application - RTO |
Instrument & Chemicals |
| 1297 | Rubber vibration separation system | MULTI-DIRECTIONAL RUBBER VIBRATION SEPARATION MOUNT - YHRM | YOUIL ENSYS CO., LTD. | http://www.youil.com | 1. Outline Multi-directional rubber vibration separation mount (YHRM) that is designed from a theory of vibration separation of rubber employs a sheer characteristic of a rubber and the elasticity of a spring. Unlike an existing one simply for uses in a shock-absorbing purpose. the present system exhibits an excellent vibration-separation performance and vibration-separation (structure-borne sound) characteristic. 2. Introduction Rubber materials used for vibration-separation rubber have characteristic as a vibration-separation rubber and a sufficient durability depending on a long-term use. An inner friction of the rubber serves to prevent a resonant amplitude reaching a resonant point from overly generating. The shape of the vibration-separation rubber is designed to obtain an effective elasticity in a 3-axis direction. For easy installation. a rubber and metal components are adhered to the vibration-separation rubber. The vibration-separation rubber has a spring constant of three directions and a twist constant characteristic unlike a metal spring. thus controlling vibration in a multi-axial direction 3. Characteristics (1) High efficiency rubber vibration separation of a natural frequency 4~6Hz (2) High effect of preventing structure-borne sound due to high frequency shield effect (3 Horizontal directivity stability of strong 3-axis direction (4) Low height and Heavy load (5) Effectiveness in Vibration. Shock and Noise proof 4. Applications (1) Diesel Engine and Generator (2) Equipments for the Vessel (3) Air conditioning apparatus in semiconductor factories (4) Equipments with large vibration force | Equipment |
| 1298 | Rust-Clean-Up | Rust-Clean-Up | Clean Water Co., Ltd. | http://www.16889223.com | 1. Outline Rust-Clean-Up is an eco-friendly drinking water treatment device that employs a zinc ionization method instead of a chemical reaction method and that removes rust and scale inside of the pipes from a long distance and prevents recurrence of them by rotating rust inside the pipes using a screw type method with a special metal galvanic effect in order to increase water pressure. which expands an ionization effect. increases the removal range of scale relatively and extends the migration distance of ionized clear water significantly. 2. Feature - Increase of pressure and ionization by a screw rotation method - Innocuous to a human body as no chemicals are used - Prevention of a decline in water pressure and increase of an heat efficiency - Extension of a pipe lifespan by converting scales inside the pipes into magnetite (Fe3O4) - Saving the costs for replacing old pipes - Removal of microbial bacteria by eliminating internal corrosion of the pipes - Positive removal of dandruff and dead skin cells and good taste of water 3. Introduction |
Equipment |
| 1299 | SADB. | SADB. | Hyosung Goodsprings Co., Ltd. | http://www.hsgoodsprings.co.kr | 1. Outline - Pump which can be used in various industrial fields. 2. Introduction 3. Character - Safe design with centerline-centered support. - Half of a case’s upper part can be detached. - API610 standard-compliant. - Flexible design and handling a wide range of liquid. - Small installation area. - Low NPSH performance. 4. Application - Oil and oil refining industry - Chemical industry - Boiler supply - Mine dehydration |
Equipment |
| 1300 | SAFE(System for Sludge as Advanced Fuel & Energy) System | SAFE(System for Sludge as Advanced Fuel & Energy) System | Enbiocons Co., Ltd. | www.enbiocons.com | - Large-scale sewage sludge drying system : one line of dryer treats 100 to 200 tons a day and 5 to 10 lines install in parallel to treat 1.000 tons a day. - Drying many different kinds of sludge at a time : sludge coming from 34 was | Water Treatment |
| 1301 | Salt manufacturing system | Salt manufacturing system | ENVIT Tech Korea Corp. | http://www.envit.co.kr | 1. Outline A system to eliminate salt dissolved within wastewater. 2. Introduction Salt dissolved within the general wastewater cause corrosion or shortening of system’s life cycle. It also induces BPR (Boiling Point Rise) raising the boiling point when wastewater is evaporated. lowing energy efficiency. Also. decrease the performance of the system by leaving large scale at the vaporization pipe from leaving evaporation residue. This salt manufacturing system compensates such shortcomings by using perpendicular vaporization salt eliminator to achieve of high-level efficiency. 3. Characteristics 1) Efficient phosphorous structure: To minimize container scale generated by heat exchange between high-density wastewater and vapor. it is designed to improve heat transfer coefficient by speedy passing through of wastewater through container side. 2) Energy conservation type: separated by low temperature vaporization lowing pressure of vaporization pipe. high efficiency is possible. enabling manufacturing of 2-tier and 3-tier high energy conserving type is possible. 3) Centrifugal separation or dehydration separation is possible according to the types of crystallized salt. 4. Application Wastewater treatment site. salt manufacturing industry. other chemical/medicine manufacturing industry | Equipment |
| 1302 | Water level measuring and sampling device | WDD50 Series | Corporation WIN | http://www.corpwin.com | 1. Outline Model WDD50 series is used to gaging the height of liquid level. taking temperature and taking samples of liquids held in storage tank without relieving pressure within the tank. 2. Introduction It avoids the loss of valuable vapors and exposing the gauger to excessive fumes. 3. Characteristics - Model WDD50 SERIES . Constructed in aluminum casting or stainless steel . Size : 4. 6. 8 . Scale size : 20M. 25M. 30M. 50M. 100M . Sampling bottle size : 300cc. 600cc . Designed for working pressure up to 3 psig 4. Application Gaging the height of liquid level. taking temperature and taking samples of liquids held in storage tank. | Instrument & Chemicals |
| 1303 | Sand and Activated Carbon Filter | Keo Jun Industrial Co., LTD | http://www.keojin.kr | 1. Outline • A filtration system to treat particles or colloidal particles using pressure difference of the front and the rear by filling porous media. such as sand. carbon. etc.. in a cylindrical pressure vessel. 2. Introduction 14Biz-137.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-137.JPG'>3. Characteristic • It offers easy installation compared with the gravity system • It is easy to operate and convenient to use; automatic operation is available by a pressure sensor. 4. Application • Post-processing of final settling tank in sewage and wastewater treatment plants • Post-processing of final settling tank in wastewater treatment plants • Final treatment of drinking water and recycled water • Removal of chromaticity and odor for all sorts of sewage. wastewater. and wastewater treatment plants |
Equipment | |
| 1304 | Sandflo Filter | Sandflo Filter | YUCHEON ENVIRO CO., LTD | http://www.yucheon.co.kr/ | 1. Outline This sandflo filter is a newly developed continuous filtration system which effectively removes SS. BOD. COD and T-P. In particular. with domestic and international patents. it has been the most popular filtration system in the world for last 30 years. 2. Introduction 3. Characteristics - Suitable for tertiary treatment of swage and wastewater - Easy operation and maintenance - High treatment efficiency due to an excellent preliminary cleaning effect - Excellent effect for SS removal 4. Application - Filtration for drinking water (purified water) and industrial-purpose water. etc. - Filtration for various industrial process waters - Swage and wastewater treatment - Purification and recovery of lake and pond water |
Equipment |
| 1305 | SBR System | Omniflo-SBR | DI Enviro Co., Ltd. | 82-2-3441-2561 | 1. Outline - A process in which five stages of inflow. reaction. precipitation. treated water release and idle are sequentially executed in one reactor. A process that has excellent control ability of load change in inflowing water amount. as well as denitrification and dephosphorization 2. Introduction 3. Characteristics - Sludge retrieval is unnecessary - By using Jet spraying aeration device. maintains consistent oxygen delivering rate even in long term operation - Stops bulking effect of sludge - Compared to similar process. underground buried structures is possible. and can be designed as circular structure also - Since it uses FRP material floating type decanter. maintenance/management is easy and life cycle is semi permanent - Through inflow Manifold. sludge is solidly drawn with circulation pump. so separate sludge withdrawal pump is not needed - Since it can have anaerobic process. nitrogen and phosphorous removal efficiency is high 4. Application - Treated water release process treatment control |
Technology & Process |
| 1306 | SC1000 Digital Controller | SC1000 Digital Controller | Yuil Lab Tech Co., Ltd | http://www.yuillab.com | 1. Outline The main feature of this sc1000 is the easy access to the operation. It enables the measured signals integrated and allows a variety of additional equipment changes in the future. In addition. it is designed to add new measurement items to the system. Regardless of measurement items. the Sc1000 digital controller can use maximum 8 sensors simultaneously depending on switching probe modules. Also. it is perfectly designed to perform independent scaling tasks. It provides the perfect process measurement technology. which is SC-telecommunication integrated. suitable for the treatment of swage and purification in the city or industry as well as for small. medium and large facilities. 3. Characteristics - Optimize the process cost using effective sensors ㆍ DO. pH. Electrical conductivity. Redox potential ㆍ Turbidity. suspended solids and items related with sludge ㆍ Nutrient ㆍ Organic load ㆍ Residual chlorine. Ozone - SC1000 for multi-measurement items ㆍ Configure up to 8 sensors depending on switching Probe-Modules ㆍ Reduce the on-site installation costs using a remote data transmission and remote control(optional) and transmit data to the control room by GSM ㆍ Check measured data. time and concentration graphs simultaneously from 4 sensors with built-in wide display as well as other sensors simply by one adjustment - SC 1000 Network ㆍ Integrate the existing analog measurement equipments in the network by using expansion cards into the SC1000 system ㆍ Converse into the new values with fine control and calculation functions ㆍ Recognize newly connected sensors automatically with the controller 4. Application - Analysis of quality of water for purification |
Equipment |
| 1307 | SCR catalysis | SCR catalysis | Kiryeon E&C Co., Ltd. | http://www.kiryeon.com | 1. Outline - This is an SCR catalyst of the typical honeycomb type. It is a completely all-in-one shaping catalyst. It possesses high vitality. It shows a total vitality that is 50%~70% higher than existing SCR catalysts compared to the area of surface. The use of a relatively small catalyst volume is possible. 2. Introduction 3. Character - Less than 1% of conversion efficiency. - By adopting the monomer spreading technology. the overall ability to process exhaust gas and the denitrification efficiency are high. - High conversion activity and selectivity. - Low SO2/SO3 conversion efficiency and NH3 slip. - Wide operation temperature domain (240℃~ 250℃) - The securing of the durability that is strong with regard to abrasion. 4. Application - The elimination of nitrogen oxide. |
Instrument & Chemicals |
| 1308 | Screen | Double arm hydraulic screen | Chung-ang general machinery Co., Ltd. | http://www.chung-ang.co.kr | 1.Outline The hydraulic screen is used to remove all kinds of deleterious particles in the screen disposed in the inlet path. It has a structure of effectively removing excessive deleterious particles that may be generated when it is rains. 2. Introduction (See table 1) <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP200300000262-2.jpg></center> 3. Characteristics It is of an H-shaped double arm type that treats the deleterious particles in large path with a single system. automatically operated by the control of program. 4. Application Sewage water treatment places. rainwater pump places. water intake places | Equipment |
| 1309 | ST Screen | ST Screen | Daeseung industrial machinery Co., Ltd. | http://www.dsene.com | 1. Outline The model is applied for fine screen of the municipal and industrial waste needed more smaller installation space. caused by installation angle.75˚~ 80˚ By the hinge system. screen can be easily lifed for maintenance from the water channel. 2. Introduction Step Screen is composed of a number of fixed lamella and movable lamella. shaped step (or stair) and assembled them in turns and connected to each bundle. Therefore. our screen has two screens; movable screen and fixed screen. When upper operating system will be starting. movable screen also begin to work the circular movements between the fixed lamellas as upper side pictures and the screened sludges are conveyed upwards. step by step. The more waiting time to stop the circular movement. can catch the more fine solid particles and accumulate much the sludge on the screen surface as a mat (called MAT phenomenon). Our step screen has the good performances; screening conveying. non-blocking and self-cleaning. etc. 3. Characteristics 1) One of the critical troubles of the conventional screens and blocking the opening of screen surface. doesn't occur because the circular movement of the lamellas between the fixed lamellas. pick and lift the screened solid particles. 2) MAT phenomenon of step screen. can strain more fine solid particles than the opening of step screen. 3) The maintenance and replacement of the parts of step screen are easily performed because all the operating system is located on the top of the screen. Especially step screen can be lifted easily by hinge system from the water channel for the purpose. 4. Application - Screen of the municipal and industrial waste | Equipment |
| 1310 | CSOs Screen | CSOs Screen | Pomona Environment technology, Inc | http://www.pomonaet.co.kr | 1. Outline - It is the best solution for elimination of impurities. - It filters CSOs through STS screen with 4 mm gap. - It automatically cleans the screen using a scrapper. - It does not require prevention of screen blockage and maintenance. - Impurities filtered by the screen can be transferred to a sewage treatment plant through intercepting pipes. - It can be applied diversely to storm overflow chamber. discharge pump plant and wet detention pond. 2. Introduction 2.1 Improvement of effluent waters - Through elimination of impurities in the CSOs. it prevents floating wastes flowing into the river. 2-2. Automatic cleaning and adjusting function of variable ware - It cleans the screen automatically using double acting hydraulic cylinder. - With the probe that detects the water surface level. it controls the angle of variable ware when the water surface level increases due to increase of current in order to control the amount of effluent. 2-3. Convenience of maintenance - Impurities filtered by the screen can be transferred to a sewage treatment plant through intercepting pipes. 2-4. Application for emergency discharge in sewage treatment plant - It can deal with the overflow of first settler at the emergency discharge. 2-5. Variety of types - There are a variety of types that consider condition and location of installation space as well as effluent and economical efficiency so it minimizes the limits of installation. 2-6. Process Rainfall. and increase in sewage → Overflow → Removal of impurities → Automatic cleaning → Transfer to impurity treatment plant 3. Characteristics 3-1. RSW type of CSOs Screen - It is a screen installed vertically at storm overflow chamber. - By attaching a panel in front. it increases the permeable area of the screen. - It improves treatment efficiency and guarantees easy maintenance. - Impurities filtered by the screen can be transferred to a sewage treatment plant through intercepting pipes. - The installation cost is very low. - It guarantees easy construction. - It has high filtration efficiency. - It has low water loss. - It can transfer the impurities to the impurity treatment plant. |
Technology & Process |
| 1311 | Screw Conveyor | DSC80 ~ DSC600 | Duk Young Engineering CO., Ltd. | http://www.dyeco.co.kr/ | 1. Outline This conveyer can deport raw material promptly and flexibly. rotating screw. 2. Introduction 3. Characteristics - This conveyer was designed to bear strong load. - This conveyer deports raw material promptly. so damage on the raw material becomes minimized. - This conveyer can be manufactured of steel or stainless steel. 4. Application - Screw Conveyor |
Equipment |
| 1312 | SCREW DECANTER | SCREW DECANTER | EWHAECO SYSTEM CO., LTD | http://www.ewhaeco.com | 1. Outline This device separates. concentrates and dehydrates minute adulteration included in various waste water and has a high dehydration efficiency. a small installation space and excellent durability. 2. Introduction When a sludge goes into a feeding pipe. a solid settles down to the bottom and liquid runs over the overflow plate in a precipitation tank. The settled solid should be removed cyclically. When a sludge goes into a high speed rotating barrel. the speed of solid precipitation gets thousands times quicker than under the state of gravity. The solid which was accumulated within the casing should be removed in the state of stop at regular cycle. As screw conveyer is equipped within the rotation barrel and the rotation barrel of this screw differs in speed. the solid which is accumulated in the inner of rotation barrel case is consecutively discharged into the exit of solid through sloped dry zone. In the meantime. separated clean liquid is continuously discharged beyond the overflow plate which enables the adjustment of height on the opposite side. 3. Characteristics - Large capacity - High function - Simple installation - Savings of driving cost - Narrow installation area - Continuous driving with reliability - Long life span and maintenance and operation cost reduction - Safety 4. Application - Clean separation - Concentration separation - Divided supply and separation - Dehydration separation - City foul water treatment plant |
Equipment |
| 1313 | Screw Decanter | Screw Decanter | Fine Etech Co., Ltd. | http://www.fineetech.co.kr | 1. Outline - Centrifuge. which conforms to the various separation purpose of vast range of materials in the overall industrial sites. is the equipment needed in the refinery. dehydration. concentration. dividing. and cleaning processes of fine solids contained in various turbid fluids. - Various types of equipment have been developed that can operate in the separation condition that had not been realized by other conventional method. 2. Introduction 3. Characteristics - Can be applied to wide range of substance properties - Unattended continuous automatic operation is available. - Treatment capacity is big enough and fast. - Rotating parts and liquid contacting parts are made of stainless steel material. - Rapidly wearing parts are made of special alloy. - High durability and abrasion resistance 4. Application - Refinery: Separate solids out of liquid - Dividing: Divide solids by particle size - Dehydration: Dehydrate liquid out of solid - Concentration: Adjust the solid concentration - Cleaning: Enhance the purity by refining the impurities in the solid |
Equipment |
| 1314 | Screw Decanter | Screw Decanter | Cheonbo Engineering Co.,Ltd. | http://cheonbo.co.kr/ | 1. Outline - Screw Decanter is a high efficient device that dehydrates various types of sludge in all sorts of sewage and wastewater by using the high speed of a centrifugal force. 2. Introduction 3. Characteristics - Externally exchangeable double bush of a Screw Decanter ㆍTechnology that prevents breakdowns by conveniently replacing a cake outlet bush on the spot ㆍExtension of a repair period ㆍSignificant reduction in maintenance cost ㆍPrevention of breakdowns and accidents by maintaining an optimum condition of a Screw Decanter all the time - Double cover cake outlet of a Screw Decanter - Dividable Cover of a Screw Decanter - Improvement of wear resistance performance of a scroll 4. Application - Dehydration of excess sludge and raw sludge in sewage and wastewater treatment plants - Dehydration of digested sludge in a sewage treatment plant - Dehydration of sludge in excrements and livestock wastewater treatment plants - Dehydration of solids in a food waste treatment plant |
Equipment |
| 1315 | Screw Decanter Centrifuge | MCS 200~700 | Muhan Technical Co., Ltd. | www.muhandae.co.kr | Features : This is used to rapidly treat a wide range of solid particles. without using any screen. filtering cloth and washing water. even in a smaller space. In addition. it features higher solid recovery. less solid moisture and higher reaction to solid concentration. Applications : - Environment : Pre-treatment of food. human excrements and cattle excrements - Food : Ethanol. juice and starch - Chemical : Synthetic resin. fertilizer. inorganic chemical and soda - Industrial waste water : Collected water. painting. dyeing. plating. paper manufacturing. power station. and steel mills - Oil : Waste oil. lubricant. cutting oil and fish oil - Civil engineering : Mining and excavation | Equipment |
| 1316 | Screw Press | Screw Press | Fine Etech Co., Ltd. | http://www.fineetech.co.kr | 1. Outline It is the structure that organic waste passes through the gap between rotor and drum by the rotation of screw rotor. solid is separated from liquid through the pressure strainer mesh of rotating impeller of cone type screw rotor. food waste is transferred from low pressure area to high pressure area in low speed by the impeller of screw rotor for starch not to exposed excessively in the separated liquid. As drum is rotating by the driving force of main body in order to enhance the dehydration efficiency and filtrated liquid is passing without mesh clogging by the simple showering device. it shows high dehydration efficiency and adequate amount of cake containing appropriate moisture is discharged through the outlet. 2. Introduction 3. Characteristics - High efficiency of more than 60% of solid recovery rate - Dehydration efficiency is excellent up to the moisture ratio of 70% or less by differential rotation compared to other equipment. - Drum is rotating. mesh clogging is prevented by automatic high pressure washing by shower device. and dehydration efficiency is high. 4. Application - Recycling facility of food waste - Livestock manure treatment facility - Polluted/waste water treatment facility - Sewage treatment facility. etc. |
Equipment |
| 1317 | Screw press | Screw press | Hansung Environmental ENG Co., Ltd. | http://www.hansungenv.co.kr | 1. Outline - This equipment dehydrates the condensed sludge by condensing in the first condensing tank and conveying to the screw press with tapered hole and uneven pitch. - It maximizes the dehydrating ratio by using wedge strainer with high tapping ratio. 2. Introduction 3. Characteristics - Increasing the tapping ratio by wedge bar type - Automatic discharging cone control by motor load - Increasing the treatment amount of pre-thickener - Increasing the dehydrating ratio by shaft screen - Increasing the dehydrating ratio by using small amount of heat media and steam 4. Application - Environmental and hygienic treatment plant - Food and distilling plant |
Equipment |
| 1318 | SCREW PRESS | REENTEC ENG | After concentrating process of coagulated sludge in primary thickener. sludge flows into screw press . It is dewatered by compressive force of screw press which is generated by taper shape and random pitch. Screw press maximizes dewaterablity by increasing open porosity. FEATURE Energy saving with low power operation Reduction of dehydrated cake by lower moisutre content Cake moisture content & throughput adjustment Stable dehydration inlet concentration change(0.8~6%) Prevention of noise & vibration with low speed operation Simple structure easy maintenance Cleaning water quantity reduction | Instrument & Chemicals | ||
| 1319 | Screw pump | Screw pump | KyungSeong Engineering Co., Ltd | http://www.kspump.co.kr | 1. Outline - Appropriate for domestic wastewater containing solid matters which can pass impeller. for low-viscosity matter such as industrial wastewater and high-viscosity matter. screened waste water. activated or fermented sludge. abrasive fluid. suspended corrupted water mixed with mill scale. service water and back wash water including paper types from similar device industry plants. and for solid matters containing moist from food manufacturing plants. 2. Introduction 3. Characteristics - A structure which can transfer any kind of solid matter naturally without causing any blockage using special spiral shaped impeller - Appropriate to transfer pulp mill water or sludge highly containing solid matter - Able to minimize power reserve rate when selecting power as variable scope of power due to the change of pumping height is small - Prevent adhesion of transfer liquid by installing adhesion prevention groove between impeller and absorption cover - Easy maintenance as inside of the casement can be monitored easily through point-detection - Casement which can be disassembled from the back part. is suitable for easy disassembly and preservation 4. Application - To transfer polluted sludge from wastewater treatment facility - To use at wastewater treatment facility - To deliver fruits - To deliver fish and shellfish - To transfer pulp and leather - To transfer coal and powdered coal - To transfer fuel for chemical power generation - To deliver food materials - To transfer various types of highly concentrated sludge |
Equipment |
| 1320 | Screw pump | Screw pump | Samhungpump. Co., Ltd. | http://www.samhungpump.co.kr | 1. Outline - Various water treatment fields( wastewater. livestock excretes. stockbreeding. leachat. discharge. pulp and wastewater). paper -making industry. food. petrochemistry. textile industry. sugar manufacturing. andoil and fat manufacturing industry. 2. Introduction 3. Character - A high efficient sludge transfer pump as a next-generation energy reduction type pump can save energy up to 70~75% as smooth flows of a screw and a diagonal flow type impeller are combined. - Low-speed and super-capacity . - Pumping power which is greater than spurt a pump/screw pump which is excellent in transferring solid matters. - A problem of unbalance occurring during driving by the local tear and wear of a screw impeller is solved. - Maintenance costs can be reduced due to a low failure rate. 4. Application - Water treatment |
Equipment |
| 1321 | Screw pump | Saehan pump | www.shpump.com | 1. The characteristics of screw pumps are: low shear rates handle high and low viscosities can be specified to have good gas handling characteristics almost pulsation free excellent suction performance with NPSH as low as 0.5m screws are hydraulically balanced seal chambers are at inlet pressure. Albany Screw Pumps feature the following: Capacity up to 1000m³/hr pressures are generally to 25 bar. some to 50 bar. Pumps are available with either. internal or external bearing configurations steam heating/water cooling jackets if required horizontal or vertical mounting. 2. Typical Applications: crude oil bitumen. asphalt fuel oil aviation fuel cargo pumping fresh / sea water oily water/slops flare scrubbing fire foam injection line stripping | Equipment | |
| 1322 | Screw Thickener | Screw Thickener | Cheonbo Engineering Co.,Ltd. | http://cheonbo.co.kr/ | 1. Outline - Screw Thickener is a high efficient thickening device to perform solid-liquid separation of solids in all kinds of sewage and wastewater by using the high centrifugal force of a Screw Thickener. 2. Introduction 3. Characteristics - Externally exchangeable double bush of a Screw Thickener ㆍTechnology that prevents breakdowns by conveniently replacing a cake outlet bush on the spot ㆍExtension of a repair period ㆍSignificant reduction in maintenance cost ㆍPrevention of breakdowns and accidents by maintaining an optimum condition of a Screw Thickener all the time - Double cover cake outlet of a Screw Thickener - Dividable Cover of a Screw Thickener - Improvement of wear resistance performance of a scroll 4. Application - Thickening of excess sludge and raw sludge in sewage and wastewater treatment plants - Thickening of digested sludge in a sewage treatment plant - Thickening of sludge in excrements and livestock wastewater treatment plants |
Equipment |
| 1323 | Scrubber | Scrubber | Fine Etech Co., Ltd. | http://www.fineetech.co.kr | 1. Outline - It is the facility to have odor containing gas transferred to the inlet of scrubber main body and passing through packed beds of each stage to reduce its odor substances by the gas-liquid contact of oxidizer and deoxidizer sprayed by spray pipeline upside the packed bed. - Scrubber is consisted with main body. circulation pump of each stage. return tank. polling. eliminator. spray nozzle. piping. chemical tank. chemical pump. and electrolysis equipment. 2. Introduction 3. Characteristics - Treat the odor by chemical cleaning method (spray) of collected odor gas from odor source by the odor removal fan - Easy to take measures against the source substances. as chemical additive is added in the spray liquid for reaction with and removal of hazardous gases - Removal of dust is also available at the same time of odor removal - Recovery and neutralization of corrosive gas and mist - Can cool down and purify even the gas is high temperature and containing moisture - No risk of explosion by dust - The treatment efficiency of hazardous gas is no less than 95%. 4. Application - Food odor removal facility - The latter facility of Incinerator - Ammonia generating business sites - Other odor generating business sites |
Equipment |
| 1324 | SCRUBBER | SCRUBBER | Entec Co., Ltd. | http://www.en-tec.co.kr/ | 1. Outline - Wet type scrubber is a system to absorb the harmful emission gases and neutralize it. - Firstly. it lowers the temperature of emission gases with high temperature and stabilizes the inflow gases. Second. it removes the pollutants by the neutralizing reaction by chemicals and absorption reaction. It is a highly effective dust collector. 2. Feature - Available of gas absorption and dust collection simultaneously - Available to control the treatment chemicals in line with the kind of toxic gases - Available to treat the combustible and explosive dust - Available to treat the gas of high temperature - Saving the operation cost due to the small pressure loss - Keeping the clean appearance because there are not rust and corrosion. 3. Introduction 4. Application - Harmful gas discharging facility of chemical plant - Dust and harmful gas discharging facility of steel making industry - Process producing the dissolved odor - Various harmful gas discharging of semiconductor industry - Harmful gas discharging facility of plating factory and incinerating facility - Harmful gas discharging facility of pulp and paper making industry |
Technology & Process |
| 1325 | SCRUBBER BODY | SCRUBBER BODY(FRP container) | Daeshin F.R.P Industrial Co., Ltd. | http://www.daeshinfrp.co.kr | 1. Outline This product is a newly developed product by removing defects in manufacture of conventional bodies. has a light weight. a good acid resistance and alkaline resistance and a low loss of pressure. and is inexpensive. 2. Introduction FRP products can be used semipermanently without regard to installation places. and now. are distributed to various places of environment-related companies. where purifying facilities are installed. to prevent air pollution.(See Fig 1) <Fig. 1> 3. Characteristics 1) Tension strength : 8.5~26kg/mm² 2) Flexibility : 600~1700kg/mm² 3) Bending force : 13~35kg/mm² 4) Specific gravity : 1.4~1.8 5) Hardness : 30~41(bar coal hardness) 6) Heat resistance : 40℃~170℃ 7) Corrosion resistance : Good 8) Machine-processing performance : Good 9) Heat insulation : About 1/180 of Fe 10) Electric insulation : Good 11) Transparency : Semi-transparency. various coloring 12) [ion] eruption : None 4. Application Manufacture of scrubber | Equipment |
| 1326 | Scrubber Tower | FM-WS-C25 | Fine Etech Co., Ltd. | http://www.fineetech.co.kr | 1. Outline - A facility in which odorous gas is transferred to the inlet of scrubber main body. passes packed layer of each stage. and reduce the odorous substances by the gas-liquid contact of oxidation and deoxidation agent sprayed by the spaying pipeline in the upper layer of packed layers - Scrubber is consisted with main body. circulation pump of each stage. return tank. polling. eliminator. spray nozzle. piping. chemical tank. chemical pump. electrolysis facility. etc. 2. Introduction 3. Characteristics - Treat the odor collected by deodorization fan in the odor generation source with chemical solution cleansing method (spray) - Easy to treat the odor components by add chemical additive to react with hazardous gas for removal - Able to remove dusts at the same time of odor removal - Retrieval and neutralization of corrosive gas and mist - Able for cooling and purification even in high temperature or containing moisture - No risk of explosion by dust - Hazardous gas treatment efficiency is over 90% 4. Application - Food odor removal facility - Incinerator latter stage facility - Nitrogen generating business site - Other odor generating business site |
Equipment |
| 1327 | Scum Drum Screen | Korea Slot Co., Ltd | http://www.koreaslot.com | 1. Outline • Device to filter sewage and wastewater from household and industry (Scum Drum Screen) • Influent brought into Header through an inlet is filtered by passing through a cylindrical screen of ECW type. Solids and impurity are discharged to the opposite along the screen 2. Introduction 14Biz-459_Scum_Drum_Screen.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-459_Scum_Drum_Screen.JPG'>3. Character • Water jet sprayed from the inside • Back washing effects by filtered water • Self cleaning with scraping effect by a blade of a discharge side 4. Application • To treat wastewater from a large-scale kitchen • Excreta treatment and urban water and sewage pretreatment process • Catalyst contact and separation process of textile and petrochemical plants • Mining industry. paper making industry. etc |
Equipment | |
| 1328 | Scum skimmer | Scum skimmer | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - Scum skimmer is equipped with an outlet at the end of a central axis by combining two sets of spiral forms into a cylinder form and collects scum with a certain amount of water by external arc of a circle when it is driven and then discharged into the direction of the axis by internal arc of a circle. 2. Introduction 3. Characteristics - Long life due to the use of stainless materials that have good corrosion resistance. - No generation of sedimentation due to scum treatment because driving is stable - High scum removal efficiency because scum sedimentation reduces - Slow a rotational speed because scum is removed twice when the skimmer rotates once. 4. Application - Removal of scum in a sedimentation basin |
Equipment |
| 1329 | Scum Skimmer | Scum Skimmer | YT Co., Ltd. | http://www.envi2000.co.kr/ | 1. Outline • A technology to collect scum that flight of sludge collector attracts backing the surface water and to clear the scum pit on the side of settling pond 2. Introduction 14Biz-30.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-30.JPG'>3. Character • Motor driving helical skimmer • Because the rotating helical ribbon brings the scum up to the surface of water and removes it. the water from removing scum can be saved. • A helical ribbon helps the scum to be easily moved into the skimmer. • There are no rotation incapability problems caused by sticking. • It can respond to water level change. • It collects scum efficiently. • Operation principle - A fixed water channel is designed as beach type so that scum can come cross easily. The helical ribbon attached to the axis of rotation installed inside of the beach brings scum up over the beach part and clears it into the fixed water channel. - The axis of rotation is continuously or cyclically operated powered by motor-drive device. • Construction - Motor. accelerator. chain-sprocket. gearing chain shaft. helical ribbon. bearing. and beach plate 4. Application • Removal of scum |
Eco-Friendly Products |
| 1330 | LOWSPEED CRUSHER | KHCS-01, KHCS-02, KHCS-03, KHCS-05, KHCS-075 | Kanghwa Crusher | http://www.khcrusher.co.kr | 1. Outline This machine is the authorized plant automation system to enhance an efficiency of crushing activities. Instead of the previous centralized processing method that collects sprue runners and crushes them at the same time. this Scutter Crusher has built a scutter near molding machine and as soon as sprue runners are generated. they are transferred immediately to molding machines automatically. . 2. Introduction It prevents an influx of impurities and moisture coming from frequent movement of sprue runners and minimizes loss of raw materials. Moreover it is the newest crushing method devised for connected use with various automation equipments and recycle systems. - See the Table 1. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000007_2.JPG><br>Table 1. Specifications.</br></center> 3. Characteristics - Simultaneous action of spalling blade and crushing blade As spalling blade and crushing blade are working in one shaft simultaneously. primary and secondary crushing are made at one time. - No dust As revolution of reducer motor is low speed and there is no screen. dust generation is very little. - Low noise level As low speed reducer motor is used. noise level is down and durability of blade is good. - Homogeneity of crushed particles Crushed particles are homogeneous owing to unique blade structure. - Economics As large sprue runners are crushed with reducer motor of small capacity. it is very economical. - Simple cleaning It is easy to change colors because cleaning is simple due to one touch separation type. - A variety of crushing condition It can crush a variety of materials from soft materials such as PP. PE. and PVC to hard materials such as ABS and PC. 4. Application - All the activities following the plant automation such as planning. design. processing. transfer. test. production management. control regulation and etc. | Instrument & Chemicals |
| 1331 | SCW Method | SCW Method | ES ENERGY Co., Ltd. | http://eses.co.kr/ | 1. Outline - The SCW stands for Standing Column Well. The well undergoes drilling into the depth of about 500 meters. The ground temperature rises about two to three degrees when underground depth reaches additional 100 meters. When the depth reaches about 500 meters through drilling. the ground temperature will reach about 17 to 23 degrees. By featuring the EWT(Entering Water Temperature). the system boasts the high COP of the cooling and heating system and excels in producing hot water. 2. Introduction 3. Characteristics - The system stands out in the COP of heating by featuring the EWT. - The system excels in producing hot water. - The system boasts of outstanding efficiency and structure applicable to high-rise and large-sized buildings. 4. Application - Heating & cooling system |
Technology & Process |
| 1332 | Seawater desalination | Multi-Stage Flash (MSF) | Doosan Heavy | http://www.doosanheavy.com | 1. Outline - Seawater desalination technology using MSF. 2. Introduction 3. Character -Desalination equipment which emits evaporation momentarily using flashing. -Multiple Flashing allows for energy use effectively in low pressure without additional heat to the stages because seawater flashing continuously occurs. 4. Application -Desalination equipment |
Equipment |
| 1333 | Seawater Desalination | Multiple-Effect Distillation | Doosan Heavy Co.,Ltd | http://www.doosanheavy.com | 1. Outline -Seawater desalination technology using a Multiple-Effect Distillation process. 2. Introduction 3. Character -The principle which sprays seawater on the exterior of the steel pipe to condense the vapor flowing inside the pipe. -Seawater outside of the pipe boils and evaporates and then the evaporations become condensed in the inside of the next stage. -Sprayed seawater boils even in low temperature. -Operation in low temperature and comparatively small size. -High heat-efficiency and low electric consumption. 4. Application -Seawater desalination equipment |
Equipment |
| 1334 | Seawater Desalination Equipment | Seawater Desalination Equipment | Watermate | http://www.wmate.co.kr/ | 1. Outline • In this equipment. the concentrate rejected from the primary reverse osmosis membrane becomes the supply source for secondary reverse osmosis membrane. Also. the treated water from both primary and secondary membrane is mixed and used. 2. Introduction 14Biz-29.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-29.JPG'>3. Character • Single-stage desalinization system - For single-stage desalinization system. high-recovery membrane. which endures 100atm of operation pressure and has 99.5% of desalinization rate. is used so that the seawater containing 35.000¬–36.000 ㎎/ℓ of salinity can be treated to the water with the salinity of less than 500 ㎎/ℓ through single membrane pass. - In this system. the high performance of membrane is crucial because the high quality of water should be achieved when only single membrane pass is allowed. - However. the system is operated cost-efficiently compared with other systems. • Double-stage desalinization system - In this system. the treated water passing from the reverse osmosis membrane of single-stage system repasses the other system for the final treated water. - Passing the first system. the level of salinity drops by 3.000–4.500 ㎎/ℓ. and after the second system. the water with salinity of less than 500 ㎎/ℓ is attained. - The desalinization rate of first and second reverse osmosis membrane needs to be 90–95% and the operation pressure shall be 70–80 atm. - The salinity of treated water of double stage system is much less than the one of single-stage system. - However. because the installation and maintenance costs are high. it needs to be selectively installed depending on the purpose of use. 4. Application • Shipping industry • Fishing industry • Shipbuilding Industry • Drinking water in islands |
Technology & Process |
| 1335 | Seawater Desalination Plant | Seawater Desalination Plant | Seawater Desalination Plant | http://www.haji.co.kr | 1. Outline - Reverse osmosis is applied to various fields including seawater desalination plants. water treatment plants. wastewater reuse plants and sewage reuse plants. 2. Introduction 3. Character - Environmental impact review. - When selecting a seawater discharge method of the RO system. select an optimum eco-friendly system by considering the surrounding environment. - The most appropriate pre-treatment solution. - Pretreatment facility is important because the RO system is vulnerable to the state of raw water quality. - Optimization of RO system design. - Review of recovery rates. - Movable RO system. 4. Application - Seawater Desalination |
Equipment |
| 1336 | Seawater Desalination Plant | Seawater Desalination Plant | Greenwell Co., Ltd. | http://www.greenwell.co.kr | 1. Outline • A reverse osmosis type of product for energy reduction • It reduces power costs by 40–50% because a high-pressure concentrate from the reverse osmosis process is connected to a turbine in this system. • The life expectancy of the reverse osmosis membrane is extended twice and consecutive processing is possible without expendable filtration aids because of the continuous microfiltration and external pressure ‘Ultrafiltration Membrane’ used for the preprocessing of the system. • It is an innovative desalination plant of which maintenance and repair costs are very low because the corrosion resistance of the duplex class materials used for the high-pressure parts is 3 times higher than that of stainless materials. 2. Introduction 14Biz-46.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-46.JPG'>3. Character • Much lower electricity costs compared with other methods • Equipped with energy recovery turbine • Long life span of the reverse osmosis membrane • Two-step preprocessing system. continuous microfiltration. and external pressure ‘Ultrafiltration Membrane’ • Reduction in repair costs because of low rate of corrosion and breakdown • Uses duplex class materials of which the corrosion resistance is 3 times higher than that of stainless materials 4. Application • Seawater desalination plant |
Technology & Process |
| 1337 | Seawater desalination process purifier | Basemi reverse osmosis seawater desalination process purifier | Haedam Engineering Co., Ltd. | http://www.haedam.co.kr | 1.Outline Basemi reverse osmosis seawater desalination process purifier is a system for removing salinity from seawater to produce edible water. Based upon the osmosis principle of plants. there is provided an artificial semipermeable membrane to which a reverse pressure in a range between 50 and 60 kgf/㎠ is applied to thereby separate the seawater and the desalinated water. 2. Introduction The artificial semipermeable membrane is made of a specific material and has very fine holes of a size of 0.0001 micro (one millionth of hair) at predetermined intervals through which only pure water having small molecular weight. dissolved oxygen and a great small amount of mineral are passed when a high concentration of water is passed there-through under a predetermined pressure. And. suspended substances and ions that are melted in the water are not passed through the membrane and are discharged to wastewater by the pressure of water newly. continuously pushed. The system includes a post-process filter. a high-pressure pump. a reverse osmosis module. post-process equipment. and a control unit. The reverse osmosis process is easy to be manipulated in a relatively easier manner when compared with other processes and results in a relatively small amount of energy consumption. so it has been widely used in the whole world. 3. Characteristics 1) Reduction of about 1/3 of production plant area when compared to existing plants 2) Good extension of pump life by adoption of air pump 3) Reduction of about 1/2 of operation cost 4) Chemical stability according to no necessity of chemicals 5) Supply of clean water by sterilization of ultraviolet rays 6) Easy installation with built-in container 7) Full auto operation and simple to use 4. Application 1) Drinking water and water of life for people in islands 2) Water of marine products manufacturing plants 3) Supply of clean water for cultivation of plants in farms | Equipment |
| 1338 | Sediment cleaning apparatus | Sediment cleaning apparatus | ENCOCO Co., Ltd. | http://www. encoco.co.kr | [ Apparatus for sediment cleaning and removal using water swirl principle ] 1. Outline A sediment hopper collects sediment stacked by high pressure water jetted from the stepped floor. the sediment materials are cleaned and adsorbed by water swirl principle. and sands are separated and removed from the sediment by centrifugal force. This product treats the sediment materials by an automated operation by setting an operation condition according to change of induced water volume. So. waste matters and sands are sanitarily separated. and drainage water and recycled water inside the apparatus are used for economical efficiency 2. Introduction(See fig 1. Attach-1) 3. Characteristics (1) Good removal and cleaning efficiency (2) It is not buried in the ground by a flood. and is stable and safe. (3) There is no production of odor due to sediment materials (4) Simple facilities and easy operation (5) Low price maintenance 4. Application (1) Sewage treatment plants and sewage and wastewater treatment plants (2) Water purifying plant (3) Paper and iron manufacturing companies (4) Transfer of high-concentrated sludge (5) Dredging of the river floor and the lake floor | Equipment |
| 1339 | Seed Spray | Seed Spray | WOOSINGREEN Co., Ltd. | http://www.woosingreen.co.kr | 1. Outline • This is a revegetation method that mixes seeds. fertilizers. membrane-curing agents. erosion control agents. chemical stains. and pure water in a sprinkling tank. and then sprays the mixed solution by using a high-pressure pump. 2. Introduction 14Biz-93.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-93.JPG'>3. Character • The revegetation process is fast because this method stimulates germination and growth of plants. • This mechanized method is also suitable for very large areas. • Seeding can be carried out at all times except in cold weather. • Seeding can be carried out on cut slopes and building grounds. • The mechanized method saves time and labor costs. and thus lowers construction costs. • This method allows revegetation on weathered rock areas or protruding rock areas. • This spray system carries out revegetation when manual planting of grass is not possible. • It is possible to select the grass species and mix them properly based on the characteristics of the construction sites so as to maintain excellent revegetation conditions. 4. Application • Roads (including expressways) • Railways • Erosion control works • Rivers • Sand fields. dams. and industrial complexes • Revegetation for construction sites. airfields. sports fields. farms. golf courses. and ski resorts • Gardening and revegetation for housing sites |
Eco-Friendly Products |
| 1340 | Selective Catalytic Reduction | Selective Catalytic Reduction | Hae Lim Engineering Co., Ltd | http://www.haelimeng.co.kr | 1. Outline - Selective Catalytic Reduction method is the spreading technology by slot type tip of a low pressure nozzle. It’s the turbulence conditioner & mixing technology of a static mixer and uses catalyst with excellent reduction in low temperature. 2. Introduction 4. Application - Selective catalytic reduction |
Technology & Process |
| 1341 | Self-Purification Sewage Treatment Apparatus | Self-Purification Sewage Treatment Apparatus | Terra Landscape Inc. | http://terralandscape.co.kr | 1. Outline • A high-efficiency wastewater self-purification treatment apparatus that systematically uses the purification function of the soil ecosystem 2. Introduction 14Biz-104.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-104.JPG'>3. Character • Produces no pathogens caused by rank odor and the scattering of water foam by covering high-quality breathable soil on the upper part instead of using a concrete slab • Contributes to the natural ecological proliferation of soil microbes through a food source (wastewater) underneath the covered soil by making the soil ecosystem come into contact with sewage • Continuously maintains the processing function without the artificial input of microbes; uses an eco-friendly method to absorb and decompose hydrogen sulfide (H2S). an element of odor. which is produced during operation. from the soil • Activates the ecological environment of the soil rhizosphere through a lawn plantation on the top. thereby resulting to the outstanding removal of nitrogen and phosphorus. and the heavy metals absorption function as an energy source of plants through grass roots • Recyclable as gray water and appropriate as agricultural water and other landscaping water because of advanced treatment water quality • Has a system that combines advanced nitrogen treatment without inserting an external carbon source to the final treated water with a low C/B ratio 4. Applications • Self-purification of wastewater • Areas with variable load change of inflow |
Equipment |
| 1342 | Semi dry absorber | Semi dry absorber | BDH Co., Ltd | http://www.bdh.kr | 1. Outline - Semi-Dry Observer developed through a technological partnership with Poland’s RAFAKO. 2. Introduction 3. Character - Semi-dry absorption reaction facility. - Slaked lime pretreatment process. - Reaction tower. - Slaked lime sprayer. 4. Application -Thermal power plant. |
Equipment |
| 1343 | Semi-Continuous Sand Filter / SCSF | Semi-Continuous Sand Filter / SCSF | Samjin Precision Co., Ltd. | WWW.SAMJINVALVE.COM | <DIV>Semi-Continuous Sand Filter (SCSF) supplies a stable and safe drinking water. SCSF is composed of the latest unit process for water treatment. This system has many references with similar function and size. <br>Usually. this system is composed of line mixing. flocculation. lamella settling. SCSF and chlorination. Coagulants like alum is injected to line mixer. Rapid mixing. coagulation and flocculation happen in the line mixer and the following pipe. Primary solid and liquid separation happen through the lamella settler. Lamella package can reduce the footprint and space required for settling. Flocculated materials settle down and clean water flow out through lamella package. The remaining suspension into the filter is detained. as passing the filtering layer. The refined water is collected through underdrain and transferred to the pure water reservoir. Backwashing with air and water are implemented in each sector separated by the inner partition.</DIV> | Equipment |
| 1344 | Semidry Harmful Gas Treatment Facilities | KC Cortwell Co., Ltd | http://www.kc-cottrell.com | 1. Outline • A dust introduced from exhaust. reaction product recycled. and alkali chemicals additionally inputted co-exist. float. contact to exhaust. and show high efficiency within a reaction tower (Alkali chemical: caustic soda. soda ash. quicklime. slaked lime. etc) • In case where it is connected to acid gas monitoring system. it may operate with minimum costs according to emission values 2. Introduction 14Biz-463_Semidry_Harmful_Gas_Treatment_Facilities.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-463_Semidry_Harmful_Gas_Treatment_Facilities.JPG'>3. Character • The concentration of dust that exists within the reaction tower is 50 to 100 times higher than that in a ordinary reaction tower • Surface of each particle is coated by alkali chemicals inputted as slurry or solids. While the particle resides in the reaction tower. it actively contact to various acid pollutants such as Sox. HF. HCI. etc. Thus. the particle is neutralized and removed. • Most of particles are screened in the Cyclone. the next process. and completely removed in ESP or Bag Filter. Thus only the clean air is discharged into the atmosphere. • Since the reaction products and dusts collected in the Cyclone are re-inputted into the reaction tower as absorption materials. the operational costs may be saved according to the recycling of the alkali chemical 4. Application • Plastic and harmful gas emission plant |
Equipment | |
| 1345 | Semi-dry Type MAT551SDE | Semi-dry Type MAT551SDE | MAT | http://www.mat.co.kr | <li>Semi-Dry type with Ion Exchange Fiber</li> <li>Minimal of water consumption and waste water generation</li> <li>Non-consumable capacity</li> <li>No mist system from duct corrosion and wetting zone</li> <li>Certified Semi S2 Mark</li> <div> </div> <li><strong>Power :</strong> A/C 200~240V. 1phase. 10Amp</li> <li><strong>CDA : </strong>4~7kgf/cm² (Drain Pump Activation. 3/8”Tube)</li> <li><strong>City Water :</strong> 3~5kgf/cm². 1/2″Tube (500ℓ/month)</li> <li><strong>Gas Inlet : </strong> NW50 Flange(up to 4ports)</li> <li><strong>Drain :</strong> PT 3/4”. Acid Drain</li> <li><strong>Gas Exhaust : </strong>-50~-100mmH<sub><font size=2>2</font></sub>O. 1m³/min . 65A PVC Pipe</li> <div> </div> | Air Treatment |
| 1346 | SensION+ DO6 | SensION+ DO6 | YUILLAP TECH CO., LTD | http://www.yuillab.com | 1. Outline HACH sensION+ is an all-in-one system which conducts electrochemical tests easily and rapidly with its menu-guiding system. 2. Introduction 3. Characteristics - Have a powerful kit which can test multiple items ㆍEquipped with a measuring instrument. electrode. a case. and accessories. all kits can conduct tests anywhere. anytime. and easy to grip - Quick and simple testing ㆍ Allowing users to set the system simply and quickly. the menu-guiding system reduces testing time efficiently and has high accuracy - Applicable in various ways ㆍSenION+ has many types of electrode in order to select the most suitable electrode to meet various testing environments 4. Application - Water quality analysis |
Equipment |
| 1347 | Sensor | V2 Series | DaAll ENG Co., Ltd. | http://www.daalleng.kr | 1. Outline - The company produces the sensor to measure water quality including dissolved oxygen. pH. ORP. conductivity. water temperature. etc. 2. Introduction 3. Character - The sensor can measure dissolved oxygen. pH. ORP. conductivity. water temperature. salinity. TDS. turbidity and chlorophyll at one time. - Minimize H2S effect by applying the Optical DO system. - Install Four Optical Port 4 for convenient sensor selection among ROX. turbidity. chlorophyll. rhodamine and water bloom as necessary. 4. Application - Waste water treatment plants. sewage water treatment plants and water treatment plants. |
Instrument & Chemicals |
| 1348 | Sensor Box | DSSB | DASSTECH Co., Ltd. | http://www.dasstech.com | 1. Outline - Sensor box is a device that monitors solar radiation. external temperature and the temperature of solar cell module with radiation sensor and temperature sensor. and transfers to inverter and monitoring system. 2. Introduction 3. Characteristics - High precision by controlling the Gain value of sensor - Miniaturization of products and easy installment by applying Push Connector - Minimizing the communication error by using RS485 communication protocol 4. Application - Photovoltaic Power Generation System |
Equipment |
| 1349 | Sensor integrated dimming ballast | Engreen | DCI Co., Ltd. | http://www.dcikorea.com | 1. Outline - Maximize the saving of lighting energy in the optimized condition as a very independent product that is designed to automatically control brightness of fluorescent lamp by satisfying the energy saving and user’s convenience. 2. Introduction 3. Characteristics - Energy saving - Saving maintenance/management cost - Improve life cycle and durability 4. Application - Energy saving in office and indoors |
Equipment |
| 1350 | Separation of sediments | Separation of sediments | SIB Co., Ltd. | http://www.sib-eng.com | 1. Outline - Sediment means gravel. sand. clay. organic materials and mineral which are accumulated on the bottom of lake. river and ocean as being flowed in from the land. Polluted sediments maybe contain harmful chemicals such as heavy metal of high concentration which affects bad influence to the aquatic life or human beings. - The biggest problem of sediments is the overflow and deterioration of water quality caused by the decline of water-penetrating capacity also it may affect the bad influence to the ecosystem. Especially. where the sediment occurs frequently there is not abundant channel flow for maintenance and it occurs frequently where the average depth of level is low. These kinds of river are located in the center of the town so in order to make the friendly river. we should manage the sediment considering the odor and esthetic factors. - Dredging the river and lake in line with the precipitation of sediments. it investigates the state and distribution of sediments and decides the amount of settlement and optimal dredging amount. When we plan the creation of added value. optimal dredging method and treatment method of dredged sediments. it is important to consider the optimal treatment method of sediment after dredging. - Seeking the method to treat and dredge the sediments. we developed the treatment system of centrifugal type and pumping dredging. 2. Feature - The first separation at the sediments spraying chamber. the first chamber of centrifuge. separating the upper water by the upper baffle plate. - Separating the residual solids at the inverted cone located on the center of centrifuge. - Washing the sediments residue and the third separation at the conveying screw and then discharging the sand and gravel and sending back left sludge to the centrifuge. - The upper water separated from the centrifuge is mixed with chemicals and separates the dissolved solids in the precipitating tank. And then it discharges the upper water and the separated solids is separated with solids and liquid at the dewater device. - Separating efficiency is expected more than 95%. - It has an inside structure which is not clogged and accumulated during the separation because the centrifuge is an opened type. - Washing and conveying screw has a non-clogged screw pitch and angle. - It is available to be operated at the optimal condition and secure the stable separation and water quality of treated water by the system and structure dealing with the change of sediments state easily. - Not necessary of driving power for centrifuge by the pumping pressure and speed of dredging pump. - System arrangement with no clogging or congesting area - Easy maintenance due to the opened structure - Expected the removal effect for nutrients such as phosphorous and nitrogen causing the eutrophication - Available to remove the toxic substances containing in the sediments - Expected the return of subsidiary materials such as sand and gravel - System structure minimizing the sludge emission - Available of automatic operation from the dredging to separation and discharge - It maintains the flow of sediments stably with the properly located equipment and pipe. 3. Introduction 4. Application - River or lake which the pollution is intensified - Solid-liquid separation of sewage and wastewater disposal plant - Solid-liquid separation of industrial wastewater abundant of suspended solids - Separation after dredging the submarine sludge around the port |
Equipment |
| 1351 | Separator (mbr)-kubota (smu) | Oneline tech Co, Ltd. | http://www.onelinetech.com/ | 1. Outline This construction method makes up for the weakness of existing membrane methods. With its water reuse system. it is capable of batch processing sewage and water drains. By minimizing construction area. it has improved the convenience of construction and has made maintenance easier. 2. Introduction 14Biz-21.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-21.jpg'>3. Character Simple structure: The Flat Plate structure of the membrane cartridge minimized obstructions to scouring flow. It has lesser screening residues. such as coarse solids and fibers that might get tangled with the Separator Submerged Membrane Unit. Its structure can also reduce the need and frequency of chemical cleaning. Simple chemical cleaning: The Separator Submerged Membrane Cartridges can be cleaned with chemicals. such as sodium hypochlorite for organic fouling or oxalic acid for inorganic fouling. This system significantly save resources as the membrane modules do not need to be removed from the membrane tank when cleaning and a separate customized chemical cleaning tank is unnecessary. Optimized efficiency in the removal of floating foreign materials 4. Application • Water quality improvement • Water treatment system • Recycling water system • Wastewater treatment |
Eco-Friendly Products | |
| 1352 | Settima Screw Pump | Fluen Inc. | http://www.fluen.com | 1. Outline • Low-vibration and low-noise Settima screw pumps are applied to almost every field of hydraulic facilities and systems.and are coupled with an external or internal motor. • High quality. low noise. competitive price. and low vibration 2. Introduction 14Biz-450_Settima_Screw_Pump.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-450_Settima_Screw_Pump.jpg'>3. Characteristics • Long lifespan is guaranteed for many applications • Runs quietly with less vibration • A rotary pump that uses an axial flow design • Only three parts can be operated. • Only the power rotor rotates among the outer parts of the body. • Idler screw functions as sealing while it is rotating with a pumped fluid. and this rotational force reduces noise and vibration. 4. Application • Hydraulic facilities • Hydraulic systems |
Instrument & Chemicals | |
| 1353 | Sewage Sludge Fuel-To-Resource | Sewage Sludge Fuel-To-Resource | Shin Young E&I Co. Ltd. | http://www.shin0eni.co.kr | 1. Outline - To remove the odor and viscosity of sewage by eco-friendly methods for general sewage environments. such as sewage sludge. pig excreta. factory waste. leachat. slaughter waste water. etc. 2. Introduction ] 3. Character - Power supply: 380 V - Processing capacity: Maximum 20 ton/day - Maximum electric power consumption: 5 kW - Process method: Physical pollution removal and biological reaction treatment - Material: Stainless steel 4. Application - Sewage sludge fuel-to-resource. |
Equipment |
| 1354 | Sewage sludge resources equipment | Sewage sludge resources equipment using earthworms | Cheonho Industry Co., Ltd. | http://www.cheonho.co.kr | 1.Outline It recycles sewage sludge by using the ecology of earthworms and produces advanced products like soil nursery. fertilizer. feed additive. microbes. etc. by using the casts of earthworms. 2. Introduction 1) All of processes from the throwing of sewage sludge to agitation and fermentation. merging and food feed. and casts and earthworms collection are carried out in an automatic system. 2) Sewage sludge and other biodegradable organic wastes are mixed to thereby maximize the range of treatment. and other some of organic wastes are mixed to thereby solve the problem that they should be treated individually. 3) It solves the problems the existing systems using the earthworms have that they should have large site area and be automatically operated. so that it can treat a great large amount of sludge even at a small site area. 3. Characteristics 1) Ecological stability - It applies organic substance circulating cycles in the ecosystem to reconstitute it as a compact system. with no generation of environmental load in the process. - The organic wastes are made as the feed of earthworms to reproduce them as the casts and the earthworms. with no generation of entropy. This makes effective reduction achieved. 2) Environmental stability - The sewage sludge having high moisture content is agitated and fermented without moisture control and removal. This is made as the feed of earthworms. with no generation of leachate and wastewater. - Once the earthworms eat the sludge. it does not generate any odors. The casts of the earthworms have excellent deodorization such that no odor is generated in the earthworm-raising place. and since they are blown to the deodorizing place through a separate pipe in the completely closed device. there is no generation of odor. 3) Technical originality - The technology is environment-friendly using earthworms. and the earthworms raising method that has been embodied in the whole world for a long period of time is carried out in a three dimensional place. so that it extremely reduces the site area for installation and the maintenance costs. - All of the processes from the throwing of the sewage sludge to the agitation and fermentation and the production of casts are automatic. so that the operation is simple and the earthworms are also automatically separated. 4) Technical economy - The operation and maintenance costs are relatively low when compared with other processes and stable by-products resources give economical advantages. - The production of high value of by-products (the casts of earthworms) - A degree of site area efficiency being higher by 10 to 20 times when compared to the existing earthworm treating methods 4. Application Treatment plants where sewage sludge. livestock sewage. sludge in other industrial places are treated. and food waste treatment plants | Equipment |
| 1355 | HEID`s Sewage Treatment | HEID`s Sewage Treatment | Halla Energy & Environment | http://www.hallasanup.com | 1. Outline HEID`s sewage treatment facilities reduce the cost of construction with the optimal process application and design as well as the cost of maintenance with the design of materials on basis of affluent results and excellent engineering. In addition. they aim at the enhancement of operational efficiency with the precision control and handling or operation in application of DCS. 2. Introduction Fig. 1. Sewage Treatment Flow Diagram Fig. 2. Process. |
Equipment |
| 1356 | Sewage treatment | Sewage treatment | Eco Tech Engineering Co., Ltd | http://www.ecotecheng.com | 1. Outline - Most of the domestic waste and sewage treatment plants have relied on ocean dumping for treatment of sludge. However. oceanic dumping was outlawed by the international law. which caused the company to seek patent for the technology to reduce sludge. 2. Introduction |
Equipment |
| 1357 | Sewage Treatment Process | Activated Sludge | Seonam Environmental Technology Co., Ltd | http://www.seonam.seoul.kr | 1. Outline - The sewage characteristics vary depending on area. combination type involving polluted and rainy water or classification type involving separate process. In addition. it varies in terms of quantity and quality depending on regional characteristics and size of sewage treatment. lifestyle. operation type. time. weekday and season. The secondary treatment of sewage containing organic matters mostly involves biological treatment methods. of which the most widely-used treatment method is activated sludge method developed by Ardent and Lockettt in the U.K. in 1914. 2. Introduction 3. Character - Activated sludge method is used to process secondary treatment for the sewage undergoing primary treatment. consisting of an aerobic tank. a final sinking basin and a sludge return facility. - Activated sludge method is used to remove degradable organic matters (BOD) by using metabolism of living things (aerobic cells). - While aerating sewage. the organic matters in the sewage serve as nutrient to spawn aerobic microbes. The organic matters are degraded by microbes and produces activated sludge effective in sewage treatment by coagulating floating matters in sewage and chloride matters. - The microbes used for activated sludge method mainly include bacteria. protozoan. rotifer and fungus. 4. Application - Activated sludge method |
Technology & Process |
| 1358 | Sewage Treatment UV Sterilizer | Sewage Treatment UV Sterilizer | Nam Yang Water Treatment ENG. Co., Ltd. | http://www.nywt.co.kr | 1. Outline • This unit is installed vertically and horizontally between the entrance and the exit of the water channel entrance. It treats sewage by emitting UV radiation. • In general. the sewage is treated as passing through secondary and tertiary sediment treatment processes in a sewage treatment plant and sterilized for microorganism removal before discharged into a river. • As 253.7nm of UV radiation is emitted. tissues of microorganisms are destructed and deactivated. • It is eco-friendly because only a few seconds of radiation with proper intensity are required for sterilization. • As lead from polluted quartz pipes decreased the intensity of UV radiation. a single quartz pipe cleaner should be installed so that they can be cleaned at regular intervals and the UV intensity can be maintained. • This unit is installed to sterilize treated water. which has already passed through a secondary treatment process in a sewage treatment plant. and to remove pathogenic microorganisms before it is discharged into a river. It can be installed in a pipeline-type or a water channel–type UV sterilizer. 2. Introduction 14Biz-48.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-48.JPG'>3. Character • Pipeline-type UV sterilizer - It is applicable for village sewage treatment plants with low capacity. In this case. the unit is connected to the discharging pipes to sterilize and discharge water. - It is easier to maintain and requires only a small installation area as compared to the water channel–type UV sterilizer. It can be designed as horizontal or vertical in shape. An automatic/manual cleaner device. a UN intensity sensor. a PLC controller. and a flow control valve can be attached to the unit. • Water channel–type UV sterilizer - It is applicable for large-scale sewage treatment plants. In this case. the unit is installed horizontally following the water flow direction so that the head loss can be minimized. - The main components of this unit are a reflection board. a UV lamp sleeve. a UV module automatic/manual cleaner device. a UN intensity sensor. a power supply device. a PLC controller. and a flow and water level controller. It can be customized based on the installation location and flow. 4. Application • Water treatment • Sewage treatment facilities • Water treatment • Potable water treatment • Wastewater treatment |
Equipment |
| 1359 | Sewage Water Quality Measuring Device (Amtax Series) | Sewage Water Quality Measuring Device (Amtax Series) | YUILLAB TECH CO., LTD | http://www.yuillab.com | 1. Outline Using an innovative liquid to gas-phase transfer principle and proven colorimetric technology. the Amtax Analyzer provides ammonia measurements that are reliable and accurate. yet requires minimal maintenance. Typically operates in tandem whit Hachs Filtrax™ Sample Filtration System. also available with two channel option 2. Introduction 3. Characteristics - Convenient. accurate. proven colorimetric technology - Compact and efficient - Economical and easy to use - Innovative liquid-to gas phase transfer methodology - Automatic self-cleaning - Optional second sample 4. Application - Analysis of water quality |
Equipment |
| 1360 | Sewage/wastewater treatment purpose bio reactor | Eco BioReactor | Ecogen Corp. | http://www.iecogen.co.kr | 1. Outline Bio Reactor is state of art organic reactor. which can quickly eliminate organic matters within sewage/wastewater using contact materials performing biological treatment and physical filtering within one reactor simultaneously. 2. Introduction Eco Bioreactor is state of art reactor to eliminate organic matters within the sewage/wastewater using contact material such as OTV Biocarbon. Booster process. Degremont Biofor process. performing biological treatment and physical filtering within one reactor simultaneously. BOD Elimination rate per area of this system is 2~3 times higher than active sludge method. not requiring precipitation tank and transport system. It is constructed with tank type package system within the factory. enabling instantaneous installation and operation without stopping wastewater treatment site operation and other construction works. 3. Characteristics (1) Biological treatment and physical treatment occurs inside the same reactor (2) BOD elimination efficiency is outstanding (3) System is compact (4) Instantaneous installation is possible without separate construction work. 4. Application (1) Wastewater treatment site (2) Sewage/water treatment site (3) Food factory water treatment system | Equipment |
| 1361 | Sewage/Wastewater Treatment SOD System | SOD SYSTEM | Inshin Environment Eng. Tech. Co., Ltd. | http://www.ilshinenv.com | 1. Outline - It is a nitrification process that does not need the expansion and modification of aeration tank or structures (apply to the latter part of 2nd deposition tank. when applying in the existing treatment plant). This process is economic as nitrification microbe is injected after cultivation to high concentration in the incubator. also has the advantage of prompt countermeasure when microbe shock has occurred. 2. Introduction 3. Characteristics - No need of external carbon source and alkaline degree injection - Easy to operate and convenient for maintenance - It is possible to cultivate high concentration microbe as carrier surface area is wide - The treated water is maintained neutral without pH adjustment as of the particularly manufactured carrier - Able to install without expansion or modification of existing treatment plant - Sludge is seldom generate a of independent nutrition denitrification engineering method 4. Application - Sewage/wastewater treatment |
Technology & Process |
| 1362 | Sewage/Wastewater Treatment UMBR System | UMBR SYSTEM | Ilshin Environment Eg. Tech. Co., Ltd. | http://www.ilshinenv.com | 1. Outline - This system can treat the sewage/wastewater stably that contains nutrition salt such as nitrogen. phosphorous and organic substances. toxic and refractory substances by upflow multilayer bioreactor 2. Introduction 3. Characteristics - Save the land by more than 30% by converting horizontal layout to vertical layout - Increase the efficiency by more than 30% by converting complete mixed type reactor to extruder type reactor - Converted from mechanical forced mixing type to natural fluid mixing type: about more than 90% of energy - High concentration microbe integration is available → Save reactor size - Use various kinds of microbe groups (use foreshore environment microbe) → Possible to treat toxic/refractory substances - Established stable operation condition: Strong against shock load such as toxicity by formation of various microbe groups (breathable bacteria group) - Simplified maintenance by automation and process omission - Simplified sludge treatment process: process that does not need thickener. improved sludge dehydration efficiency 4. Application - Industry wastewater - Village sewage of small/medium size - Sewage of medium/large size |
Technology & Process |
| 1363 | Crystal Lining Technology for Repair of Sewerage Pipes and Structures | Crystal Lining Technology for Repair of Sewerage Pipes and Structures | Hanmisanki Co., Ltd. | http://www.hanmisanki.co.kr | 1. Outline - Crystal lining technology has purposes of anticorrosion. water-resistance. repair. and reinforcement. It coats resin mortar that is mixture of paint for reduction of VOCs. glass powder. and natural garnet on concrete structures. 2. Introduction - It can be applied underwater and in wet condition. - It is appropriate for repair of the sewerage system. - Any still water is possible since it has excellent adhesion. - Since it is strong against acid and alkali so it can repair any treatment tank. - It can be used as reinforcement of concrete as it is strong. - It can be used as walls and floors of food factories. - It can be glued underwater and in wet condition so it can reduce the construction time. - It uses glass powder of recycling products. - It uses paints for reduction of VOCs. - It can be used for basis of construction. - It can repair underground structures such as pipes. boxes. manholes. subway. tunnels. and so on. 3. Characteristics - It has excellent endurance. - It is most appropriate for prevention of aging of steel concrete. - With 0.00 g water permeability. a complete water-resistance is possible. - When applied to glass-fiber sheet. it becomes very strong. - It is excellent for damage from sea wind. - It has no pollutants or toxicants. - It can be used underwater. 4. Application - It can be applied for repair of underground structures such as sewerage pipes. boxes. manholes. subway. tunnels. and so on. - It is appropriate for repair of the sewerage system. - It can be applied to walls and floors of food factories. - It can be used for construction basis. | Technology & Process |
| 1364 | SL– F.R.P. Trenchless Repair Technology for Sewerage | SL– F.R.P. Trenchless Repair Technology for Sewerage | Hanmisanki Co., Ltd | http://www.hanmisanki.co.kr | 1. Outline This is a trenchless method using pneumatic sleeve expander device. F.R.P resin-impregnated glass fiber and sleeve consisting of stainless and rubber sleeve are put on the sleeve expander device. And the device is transported to the place to be repaired and the air supplied from control device apply the fiber to the inner pipe. 2. Introduction 2-1. Process - Analysis of field and CCTV monitoring - Dredging and washing inside pipes - Cutting connecting pipes and removing obstacles - Sending sleeve expander device after reinforcement and water tightness material was applied - Locking is done by applying the pressurized air 3. Characteristics 3-1. Constructability and adjustment - This technology is applicable to any kind of pipes and conditions including breakage of connection and a pipe. and water invasion. - Trenchless repair is done in the shortest time while water flows. - Repair material is strongly attached to a pipe and anti-corrosive. - Invasion of plant roots and water is prevented and water tightness is also excellent. - This technology was previously applicable to only a pipe whose diameters are between D250 mm ~ D450 mm but now to D1.000 mm. for input to a manhole became easy because of newly improved (assembled) sleeve expander device. 3-2. Environmental friendliness - Excellent water-stopping function enables water tightness - It is applicable irrespective of traffic congestion area. commercial area. or other obstacles. Compared to trench cut method. environmental hazardous factors such as construction waste. traffic congestion. dust. noise. and oscillation were remarkably reduced. 3-3. Water tightness - Repair work is done while water continues to flow - Repair material has superior water tightness because of chemical resistance and anti-corrosion. - Water tightness is maximized because of rubber sleeve SBR and water swelling rubber. - Excellent water tightness is guaranteed due to stain sleeve lock inside the rubber sleeve. - Epoxy resin easily attaches itself to a pipe and pressure and heat improves the adherence. - Resin-impregnated glass fiber is applied to a damaged pipe and spreading/repair machine enhances adherence. water tightness. and roughness coefficient by applying pressure. 3-4. Chemical resistance and durability - Material are produced by excellent resistant tooling - The rubber sleeve is made of SBR rubber which is less affected by the chemical reaction among substances of sewage and by acid or alkali. - Its complex structure using water swelling rubber improves water tightness all the more. - F.R.P. resin has superior flame resistance. incombustibility. and anti-corrosiveness. - Repair material has superior durability and chemical resistance - Glass fiber-impregnated epoxy resin is easily attached to a pipe. 3-5. Water flushing capacity and strength - Sleeve expander device carries out repair work while water flushes. - Water flushing capacity is restored to that of a new pipe - Strength is also restored to that of a new pipe after trenchless repair work - Stainsleeve has a male fitting and a female fitting so that it forms locking with sleeve expander device. 3-6. Applied to sewer pipe system (Fig. 1.) |
Technology & Process |
| 1365 | Sewerage treatment system | DeniteTM System for removing nitrogen and SS | Ecoset Co., Ltd. | http://www.ecoset.co.kr | 1.Outline The present system operates in downward currents. which is effective to remove SS and does not need to have a clarifier or additional discharging water polishing filter. As denitrification and filtering processes are combined. the system exhibits an excellent of process effect. 2. Introduction Wastewater flows around gas bubbles in the pores of the filters. This makes the bulk density of the filter small and improves the contact with microorganisms and the filtering efficiency. Since the gas bubbles cause the head loss to increase. it is necessary to remove intermittently the gas bubbles. The removal is carried out in a reactor to which a backwashing water process is applied for predetermined seconds. Nitrogen gas in which rapid backwashing water is contained is emitted in the air to thereby reduce the head loss. Excessive loads of SS are backwashed in the system in the conventional manner. Generally. a denitrification/filtering system needs NRC four or five times while the filter is operating before backwashing according to the ratio of removal of nitrate-nitrogen to removal of SS. A part of dirt backwashing water is used to reproduce a denitrification process and after backwashing is returned to a tank. <center><img src=http://www.apec-vc.or.kr/attfile/market_place/img/MP200300000224.jpg></center> 3. Characteristics 1) Simultaneous implementation of the removal of SS and denitrification and no installation of settling pond 2) Easy and accurate engineering execution for target water quality as SS removal. denitrification and dephophorus processes are executed in measured manner 3) Improvement of durability. no blocking. high concentration of SS load according to nozzle-less designs. and thereby. improvement of safety. long life and high reliability 4) No short-circuit problem by installation of denitrification filtering tank of fixed biofilm type in downstream. achieving a stable quality of water and a high reliability 5) Prevention of blocking by use of unique media 6) Long backwashing period by high load factor of SS (two~four days per a time) 7) Relatively small area for site required 4. Application Various sewage and wastewater treatment plants. sewerage facilities | Equipment |
| 1366 | SG joint | SG joint | Samjin V&P Co., Ltd. | http://www.sjvp.co.kr | 1. Outline - SG Joint is a pipe connecting joint for compression fitting which was originally developed in Germany. This joint is currently being used in dozens of countries worldwide including Europe. Japan. Latin America. and Southeast Asia for its recognized outstanding tightness. handiness. durability. hygiene. and recyclability. 2. Introduction 3. Character - Economical Efficiency: Compared to existing threaded or welding pipe joints. SG Joint requires significantly less working hours. The installation is easy for everyone. and thus. even for those unskilled. - Safety: A performance test is strictly conducted in every stage of manufacturing. starting from the very first step of material preparation. Safe installation is assured as leakage test and rigorous inspection are carried out on all products in each process. - Efficiency: With the rubber-ring inserted at the end of the stainless connecting part. the basic structure of this product is more efficient than the other existing methods. By simply putting pipes into the joint to be connected. and compressing with a pressing tool. the greater tightness is obtained. 4. Application - Joints |
Equipment |
| 1367 | SHAD(SESHINCLEAN HYBRIDE ANAEROBIC DIGESTER) | SESHINCLEAN HYBRIDE ANAEROBIC DIGESTER | Seshinclean Co., Ltd. | http://www.seshinclean.co.kr | 1. Outline Transform the organic matters to methane and carbon dioxide by using hydrolysis bacteria. anaerobic acidogenesis and methanogenic bacteria in the environment without oxygen. 2. Introduction 3. Characteristics - Short operation time and high computing power with fast sludge granulation - Most of organic matters transform into methane gas that produces combustible energy and reduces mobile power - Able to overloaded operation that needs small installation area. compared to aeration tank - Great drainage of sludge - Produces small amount of sludge 4. Application Food wastewater. pharmaceutical wastewater. fermentation wastewater. alcoholic wastewater. petroleum and chemical wastewater and wastewater with organic matters |
Equipment |
| 1368 | Shaftless S. Conveyer | Keojin Environment Machinery | http://www.keojin.co.kr/ | 1. Outline • The transfer length becomes longer by removing the central axis. It is an effective axial structure conveyer. • It has a big transfer volume rate without the central axis. and the deformation caused by bending rarely occurs. 2. Introduction 14Biz-417_Shaftless_S._Conveyer.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-417_Shaftless_S._Conveyer.jpg'>3. Characteristics • It can convey without sticking and tangling because it does not require the installation of a mid-hanger bearing. • It is easy to clean and maintain because it does not have a central axis. • It can be used for different purposes because of its long transfer length. • It is produced as a closed structure to prevent odor so that it can be operated hygienically. 4. Applications • To transfer the impurities of a fine screen • To transfer the sludge cake • To transfer crops and sand • To transfer the mediation and sewage treatment impurities |
Equipment | |
| 1369 | Siloxane Removal System | Siloxane Removal System | MIJI ENERTECH Co., Ltd | www.mijienertech.co.kr | 1. Outline - This Siloxane Removal System removes siloxane contained in biogas produced by anaerobic decomposition of organic matters of the digestive tanks in buried waste and sewage treatment plants. etc. 2. Introduction ▪ The application 3. Character - Siloxane forms silica when it oxidized in the combustion chamber of gas engine or macro gas turbine. Silica of powder/crystalline state accumulated to the combustion chamber corrodes it. - Us mesoporous adsorbent MJA – TS1 which has excellent siloxane adsorptivity. - Compact design for convenient maintenance. - Auto regeneration of adsorbent. 4. Application - Siloxane removal system |
Equipment |
| 1370 | Silt protect membrane | Silt protect membrane | Tiger Corp. | http://www.tiger.co.kr | 1. Outline The purpose is to protect our marine resource and preservation of natural environment since marine and river reclamation works and oil spread by construction work has severe impact for nearby marine resource and natural environment. 2. Introduction 1) Under water type: general phosphorous type waste prevention net. A type that has float on the water surface and canvas dropped under water surface (See fig. 1). 2) Independent type: Float is located underwater. It has outstanding effect to prevent waste in the deep-water environment (See fig. 2). |
Instrument & Chemicals |
| 1371 | Silver ion Antibiosis Pipe | Silver ion Antibiosis Pipe | AKRMT Co. Ltd. | http://www.akrmt.co.kr/ | 1. Outline - In Korea. once they have been installed. most of the drinking water pipe are used for quite a long time. So. the pipes must be applied with antimicrobials. And the products applied with organic antimicrobials are harmful to the body. Thus. these organic antimicrobial products should be replaced into inorganic antimicrobial products. In short. the Silver ion Antibiosis Pipes are ones that has no occurrence of the resistant bacteria and has an antibacterial force to the super bacteria which contain silver inorganic antimicrobial BATECIDE. 2. Introduction BATECIDE : Zeolite that is ion- exchanged with silver(Ag+) and Zn+). metal ions that have antibacterial activity. This is excellent in antibacterial and deodorization functions because it is evenly dispersed on the surfaces of the antibiotic treatment targets. 3. Character - High safety. - Antibacterial effect on a wide range of the germs. molds and the viruses. - Good durability. - Good deodorization. - Good heat-resisting property. - Good applicability. 4. Application - Silver ion Antibiosis Pipes. |
Equipment |
| 1372 | Silver Membrane Disc Filter | Silver Membrane Disc Filter | JYSCO | https://www.jysco.com | 1. Outline - Silver Membrane Disc Filter can filter pure silver (purity 99.97%) size 0.2~0.5 micron of particles. This Silver Membrane Disc Filter has chemical resistance and heat resistance. 2. Introduction 3. Character - Excellent chemical resistance and heat resistance. - Non absorption. 4. Application - X-ray diffraction - Scanning electron microscope - Raman spectroscopy - Flammable respiratory dust - Highly –performance liquid chromatography - Chlorine monitoring - Bacteria sampling |
Equipment |
| 1373 | Simple Water Quality Gauge | Simple Pack | SIBATA CO., Ltd | http://www.sibata.co.kr | 1. Outline This Simple Pack is designed to immediately obtain an on-site gauge result in a simple way without any preliminary expertise. The SIMPLE PACK is made easy-to-use and may get the result by using colorimetry employed by processing enactment and sanitary testing enactment. By stirring up water in the Simple Pack. the result of comparing the standard color chart can be obtained. 2. Introduction 3. Characteristics - Light-weight and small-sized spray set. The device is hand-held size and is small in volume. - Manipulation is OK just by inhaling and stirring up water. Put test water into a container containing a sample and stir it up. When 10 seconds to a few minutes pass by. reaction starts to appear. - SIMPLE PACK. accessory and color chart are all that are needed. (Except for COD. NH4 and PO4). it is feasible to gauge through the comparison of test water with a color chart. - There is no need to have relevant experience or expertise. 4. Application - Water quality check |
Equipment |
| 1374 | Single channel toxic gas detector based on Chemcassette? | SPM | Honeywell Analytics Co., Ltd | http://www.honeywellanalytics.co.kr | 1. Outline - It is toxic gas detector based on Chemcassette? monitoring technology. It can be installed at anywhere and detects specific gas targeted for monitoring rapidly and accurately. 2. Introduction 3. Characteristics - Fast and accurate gas detection - Use smart sensors - Do not need modification - Provide various signal outputs - Save maintenance costs 4. Application - Chemical storage rooms - Exhaust ducts - Gas cabinets - Vacuum pump rooms - Emergency response teams - R&D laboratories |
Instrument & Chemicals |
| 1375 | Single Jet Water Meter | Single Jet Water Meter | HANSEO PRECISION METER Co., Ltd. | 82-31-997-1445 | 1. Outline - Single Jet Water Meter 2. Introduction 3. Character - Eco-friendly meter that satisfies the solubility test. - No impact from an external magnetic force as this meter has passed the static magnetic field test. - Significant reduction in freezing and bursting due to dry structure. - Simple structure which makes this meter suitable for places where there is small installation space. - Excellent sensitivity and durability. - 360-degree rotation of the directive part. - The inside of this Meter is made from engineering plastic which has excellent resistance to high pressure. - No magnet impact caused from iron. 4. Application - Single Jet Water Meter. |
Instrument & Chemicals |
| 1376 | Single-stage Turbo Blower | JEWANG TURBOTECH. CO., LTD. | http://www.jw-turbo.co.kr | 1. Outline • It was designed to increase the speed in the 1stor 2nd phase. and it is classifiedinto GL-type. which is used in general conditions. and GB-type. which isused in pressures higher than those for the GL type. • It is applied to be operated by the general motor. 2. Introduction 14Biz-473_Single-stage_Turbo_Blower.jpg) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-473_Single-stage_Turbo_Blower.jpg'>3. Characteristics • It is designed for the easy installment of a bearing to the drive shift because each bearing in the gearbox has a vertically divided structure. • The bearing and each seal are designed with the best technology of HV-TURBO and applied to an air blower and gearbox extremelyand precisely. • The impeller and the pinion shaftcan be separated as an integral type. and they are designed to prevent dynamic imbalance during the maintenance of an air blower. Therefore. it maintains its initial mechanical performance for long-term use. • The installed bearing is a slide type and designed to show the best performance for long-term use. Air Seal and Oil Seal are designedto be noncontact types. 4. Application • Wastewater treatment plants |
Equipment | |
| 1377 | SM-1000 | WISE Sensing Inc. | http://www.wisesensing.com | 1. Outline - SM-1000 is a single-unit panel incorporated with a buzzer unit and an indicator designed to indicate gas content on a real-time basis. 2. Introduction 3. Characteristics - SM-1000 is a single-type indicator designed to detect various types of gas successively. - Compact panel embedded with various features - Easy maintenance and installation - Digital LED bar & FND Monitor Type - Possible installation on wall and panel - Easy detector installation and connection - Choice of either a sensor type or a 4-20mA type based on user’s request -Incorporation of a power switch into each of the indicators -Active compatibility with a sensor type and a 4-20mA -Wide range of compatibility applicable to sensors with 3ppm-2000ppm - Auto calibration based on user convenience -Various power features (AC 110V ~ 220V. 50/60 Hz) 4. Application - Gas leakage indicator |
Equipment | |
| 1378 | Siphon-type Thickner | Siphon-type Thickner | YUCHEON ENVIRON CO., LTD | http://www.yucheon.co.kr/ | 1. Outline As a highly-efficient energy-saving concentration device consuming almost no energy when being in process of concentrating. this Siphon-type Thickner concentrates sludge generated in the water treatment process. 2. Introduction 3. Characteristics - Increase a treatment amount of a pressurized compression dehydrator - Save energy in freezing and thawing dehydration - Stabilize a gravity sedimentation concentration tank - Reduce the size of a digestion tank and reduce heat energy - Improve efficiency of wet oxidation treatment - Reduce loads of a bio reaction tank by clarifying side-streams - Replace a gravity sedimentation concentration tank 4. Application - Gravity sedimentation concentration tank in purification plants - Concentration of excess sludge - Gravity sedimentation concentration tank of sewage water - High-concentration of discharged sludge - Removal of SS from filtrates - Concentration of raw sludge in the first sedimentation tank |
Equipment |
| 1379 | WS501, WS502, WS503, WS504, WS50A, WS50B | WS501, WS502, WS503, WS504, WS50A, WS50B | Corporation WIN | http://www.corpwin.com | 1. Outline The floating suction is used for skimming off the upper layer of liquid in a storage tank. 2. Introduction The float of this floating suction is positioned to always turn upward vertically. Corporation WIN had wide experience in this field and can also manufacture floating suctions to meet your specific requirements. 3. Characteristics - The floating suction is used for skimming off the upper layer of liquid in a storage tank. The float of this floating suction is positioned to always turn upward vertically. Corporation win had wide experience in this field and can also manufacture floating suctions to meet your specific requirements. - Model WS501 . Flange size: 2 ~ 16 . 90。swivel type - Model WS502 . Flange size: 2 ~ 16 . 180。swivel type 4. Application Skimming off the upper layer of liquid in a storage tank | Instrument & Chemicals |
| 1380 | Skip Hoist | Skip Hoist | YT Co. Ltd. | http://www.envi2000.co.kr/ | 1. Outline • This equipment transports impurities and sediments vertically from the settling basin to a storage hopper. 2. Introduction 14Biz-33.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-33.JPG'>3. Character • Has a small installation area with a large tilt angle. • Low power costs through minimization of friction between the bucket and the transportation guide rail. • As a bucket arrives at the hopper. it turns over automatically. pours its contents. and descends. • Depending on the treatment process type. the hopper and the transfer conveyer can be selectively installed and interoperated. and thus it can be configured as a consecutive processing system. 4. Application • Transports impurities • Transports sediments |
Eco-Friendly Products |
| 1381 | SKY TOP. | SKY TOP. | SK chemicals CO., Ltd. | http://www.skchemicals.com | 1. Outline - By efficiently controlling corrosion. scales. and microorganisms in cooling water. this equipment achieves the best water treatment and contributes to process improvement &energy reduction. 2. Introduction 3. Character - Stabilized Phospate Program ㆍPhosphate Program uses Ortho. poly. and Organic phosphate to perform an Anodic & Cathodic method function. and makes Org-PO4 & Polymer control scales. The program can be used for a wide range of Ca-Hardness water. - Low-Zinc Program ㆍLow-Zinc Program uses Ortho. Organic phosphate. Natural carbonate. and low concentration Zinc to perform an Anodic & Cathodic method function. and makes Org-PO4 & Polymer control scales. Because the program shows excellence in stability. it is efficient to use the program in the high-concentrated operation. - All Organic Program ㆍAll Organic Programs are environment-friendly products which do not include inorganic-phosphate and heavy metal. Using organic phosphate. each of these programs performs a Cathodic method function. and Org-PO4 & Polymer hold down the scales. When water’s Ca-hardness is high. the program keeps an excellent method function without scale problems. - Biocide ㆍA program which holds down microorganism’s increase to control the Microbial problems (Slime. Microbiologically Induced Corrosion) efficiently. 4. Application - Water treatment process |
Equipment |
| 1382 | SKYFLOC. | SKYFLOC. | SK Chemicals Co., Ltd. | http://www.skchemicals.com | 1. Outline - This brand new environment-friendly water treatment can be properly input when treating pollutant-contained waste water such as industrial waste water and urban sewage. It removes the pollutants by a physical. chemical. and biological treatment method. and improves water quality until the purified water can be discharged in nature. 2. Introduction 3. Character - Various product families: enable to choose the most suitable product for the waste water treatment process. - Compared to other companies’ products. our high-technology products can reduce customers’ product usage. - Products have advantages in process automation because they can be not only powder-formed ones but also liquid-form and emulsion- form ones. 4. Application - Water treatment process. |
Equipment |
| 1383 | Slope greening construction (natural) | Dawon Landscape & Construction Co., Ltd. | http://www.dawonland.co.kr | 1. Outline This method mixes ryegrass and original plant species. and conducts Seed spray. and then spreads natural textile net on the slope naturally and fix adjacent sectors with fixing pins 2. Introduction 3. Characteristics - Prevent topsoil loss during rainfall - High water content rate and moisturizing effects. good germination and growth - High construction fees - Adherence power fall if anchor pins used for fixing purpose can be removed due to contraction of the Net when dryness and wetness repeats 4. Application - Common soil. ripping rock |
Technology & Process | |
| 1384 | Slope greening construction (Straw-mat mulching works) | Dawon Landscape & Construction Co., Ltd. | http://www.dawonland.co.kr | 1. Outline This method conducts seed spray on the surface of the site. and then covers the whole slope equally with the mat wrapped with rice straw and installs fixing pins on top of the straw-mat. 2. Introduction 3. Characteristics - Simple construction. excellent workability - Low construction fees by using domestic material - Decaying straw-mat will be the catalyst for grass growth - Unfavorable to sites where strong wind is expected - Difficult to vegetation carpeting as scouring erosion can occur easily - Insufficient to protect slopes from soil loss due to weak material 4. Application - Common soil |
Technology & Process | |
| 1385 | Slope greening construction (strip sod, block-sod) | Dawon Landscape & Construction Co., Ltd. | http://www.dawonland.co.kr | 1. Outline This method is appropriate to Korean climate and soil quality by settling certain size of sods on the surface of the sector or settling them with same distances apart (block-sod. 1/2 strip sod. 1/3 strip sod) 2. Introduction 3. Characteristics - Outstanding initial landscape as initial work is short. favorable to ecological succession of vegetation - Create stable slope after finalizing vegetation - Relatively expansive construction fees (Need too much labor force. and use construction period) - Need long time for complete carpeting - Risk of soil loss if rain falls before carpeting 4. Application - Common soil |
Technology & Process | |
| 1386 | Sludge & Livestock Wastewater Treatment System | AQUEX SYSTEM | Ilshin Environment Eng. Tech. Co., Ltd. | http://www.ilshinenv.com | 1. Outline - A system that removes odor through 3~4 stage dehydration process of concentrated or dehydrated sludge. and makes sterilized noodle shaped pellet of 5~10% water content - Use the pellet as combustion boiler fuel to produce warm water. steam. and electricity power [Recycling] 2. Introduction 3. Characteristics - Minimized energy expenses by dehydration and low temperature drying process using the gravity particularly - Require less investment expense as it is compact and structural facility of less installation area and small facility size - Can reduce the operation expenses in large scale by getting rid of auxiliary energy cost using produced pellet as fuel and utilizing the energy generated separately such as warm water. steam. and electricity power - Environment friendly facility to prevent air pollution in maximum level by deodorization and low temperature drying process using microbe - Spearhead integrated system that can produce energy and reuse it as well as incineration. carbonization. solidification. composting. fuelization. and drying. and it can be applied with a certain part of the integrated system divided by its applications according to the request and condition of the customer 4. Application - Sludge treatment of sewage treatment plant - Sludge treatment in the livestock wastewater treatment plant - Paper sludge treatment - Oil sludge treatment - Pellet production of steel sludge - Other 40 or more types of sludge (including toxic and nontoxic substances) |
Technology & Process |
| 1387 | Sludge activity meter | In-situ Acti-meter | Dream Bios Co., Ltd. | http://www.dreambios.com | 1. Outline - Measuring the activity of microorganisms in the bio reactor - Measuring the change of inflow load when BOD and COD meter is absent - Measuring the nutrients load for each time 2. Introduction 3. Characteristics - Easy operation with the manual for non-expert - Reducing the labor and power cost due to proper operation - Necessaries of small and medium sewage treatment plant without manager 4. Application - Measuring the sludge activity |
Technology & Process |
| 1388 | SLUDGE AIR DRYER(Sepa Dryer - PSD) | Sepa Dryer - PSD | ReenTec ENG | Sepa-Dryer(PSD) dries sludge from wasteater treatment plant by using adiabatic compression air(below 90℃) from Turbo-Blower. It is basic model of Sepa-Dryer which enlarges specific surface area by crushing particle of sludge with Air Ejector and dries contiuously with Multi-Cyclones. FEATURE Installation rear dewatering process Granular dried solid production Separation free water & surface water of cake by high velocity circling fluid field => water evaporation Low temperature drying : Below 90℃ Sludge weight reduction : 1'st stage drying (50%). 2'nd stage drying (over 76%) APPLICATION Wastewater treatment plant. food waste disposal plant Night soil treatment plant. animal manure treatment plant Food factory. meat factory. animal feed factory Paper manufactory. chemical plant Applicable to all of rear dewatering process (Centrifugal hydroextractor. belt press. filter press. screw press& etc.) | Equipment | |
| 1389 | Double Chain Sludge Remover | Metallic, Non Metallic | HKET.CO.,LTD. | http://www.hkmic.co.kr | 1. Outline Sludge collector constructed in various sedimentation basin collect the settled solid or sludge to the located hopper for continuous. 2. Introduction Flights of endless double link chain running in guide rail collect the settled solids or sludge of basin bottom to the sludge hopper. <center><img src=http://www.apec-vc.or.kr/NeoMarketPlace/download.asp?file=MP2005000114_1.jpg></center> 3. Characteristics - Possible for scum removal as special design type. - Initial cost is low by means of one unit drive in two sedimentation basins. - Non-metallic chain and sprocket eliminates metal noise and friction. and serve long line. - Non-metallic materials eliminates oil supply and less friction of rotating parts. - Non-metallic materials is easier construction than metallic materials. 4. Application - Water supply treatment. - Municipal sewage treatment. - Industrial wastewater treatment. | Equipment |
| 1390 | Sludge Collector | Double Chain Flight Type Sludge Collector | WISE EnTech Inc. | http://www.wiseentech.com | 1. Outline - The device which is installed in a variety of sediment pools is designed to successively remove sludge (sediments) and maximize the efficiency of sediment pool operation. 2. Introduction 3. Characteristics - A 4 axis-type motor is used to remove scum. - It costs less because of the installation of a 2-zi 1-motor type. -On the part of chain and sprocket. the device is less erosive than metal products and produces less noise than when it is in rotation. (non-metal) -On the part of rotary parts. friction coefficient is smaller and the device obviates the need for injection of oil. (non-metal) - Installation is easier than metallic products. 4. Application - Sludge Collection |
Equipment |
| 1391 | SLUDGE COLLECTOR | BRIDGE-TYPE SLUDGE COLLECTOR | WISE ENTECH Co., Ltd. | http://www.wiseentech.com | 1. Outline - It is set up at sedimentation basins places in order to maximize the operation of a sludge basin by removing the sludge(precipitates) in a sequential way. 2. Introduction 3. Characteristics - Easy to conduct and repair and maintenance. -Excellent in a scum removal abiliyt. - Suitable for long water ways. - No machinery breakage because high concentrated sludge is massively deposited. 4. Application - Sludge collection |
Equipment |
| 1392 | Sludge collector | Sludge collector | Cheonbo Engineering Co., Ltd. | http://cheonbo.co.kr/ | 1. Outline - This fixation preventing circular sludge collector prevents fixation of sludge at a sludge outlet in a sedimentation pond or a sludge thickener of a water treatment plant or a sewageㆍwastewater treatment plant by using water spray and collects sludge with proper concentration. 2. Introduction 3. Characteristics - Structure is simple and easy to maintain. - No clogging due to a fixation preventing function. - Driving is stable due to an overload monitor in a decelerator. - Little change in sludge interface even when a fixation preventing function operates. - Low power cost because of efficient composition of each structure. 4. Application - The first and final sedimentation basin with a circular structure - Circular thickener |
Equipment |
| 1393 | SLUDGE COLLECTOR | CENTER DRIVING TYPE SLUDGE COLLECTOR | WISE ENTECH CO., LTD | http://www.wiseentech.com | 1. Outline It is set up at sedimentation basins places in order to maximize the operation of a sludge basin by removing the sludge(precipitates) in a sequential way. 2. Feature - Suitable for mid and large-sized sedimentation basins. . - Suitable for high concentrated sludge because of using a high stroke driving motor. - Is stable as a driving motor is installed at the pipe at the center and over concrete. 3. Introduction 4. Application |
Equipment |
| 1394 | Sludge Collector (underwater towing type) | Sludge Collector (underwater towing type) | WONJIN NB TECH LLC | http://www.wjnbtech.com | 1. Outline Underwater towing-type sludge collector is comprised of driving gear. rail. transfer vehicle. scraper. towing device. and controlling device. The transfer vehicle moves from driving gear to wire rope on the rail installed at both ends of the reservoir. and collects sludge on the bottom of the reservoir in a hopper. When the transfer vehicle approaches to the wall of the hopper. the lever of the controlling device is pushed. and the limit switch stops and reverses the electric motor. and then the transfer vehicle lifting the scraper moves backward. And when the transfer vehicle approaches to the other wall. the same thing happens and the movement of the vehicle continues. It is useful where a sedimentation accelerator is installed in the sedimentation basin. 2. Introduction 3. Characteristics - Long lifecycle with high corrosion-resistance and wear-resistance - Reduce maintenance cost when changed - Need not to apply oils (prohibited) as it employs self-lubrication plastics - Easy to install and fix as each part is light 4. Application - Collect sludge |
Equipment |
| 1395 | Sludge concentration centrifuge | Sludge concentration centrifuge | Muhan Technic Co., Ltd. | http://www.muhandae.co.kr | 1. Outline - It is a sludge concentration centrifuge to control the concentration of discharged solids by injecting the surplus sludge and settled sludge inside the bowl of rotating body produced by wastewater treatment process. 2. Introduction 3. Characteristics - Small amount of environmental pollution compared to other dewatering device. - Not necessary of close attention of operator. - Available of automatic operation stably. - Removing the SS of surplus sludge with low concentration more than 90% without the injection of coagulant. - Available to improve the treatment capacity in the case of injecting small amount of coagulants. - Available to control the discharged concentration liquid from minimum 1% to maximum 10%. - Available of stable operation because of differential speed-controlling function to discharge the concentrated liquid regularly by controlling the speed of screw automatically with dealing with the change of concentration of inflowing sludge. 4. Application - Tap water - Sewage - Livestock wastewater - Excreta - Surplus sludge or complex sludge produced by other wastewater treatment facility |
Equipment |
| 1396 | Sludge concentrator | EV CONCENTRATION ZONE | Environmental Vision 21 Ltd. | http://www.ev21.co.kr | 1. Outline EV21's EV Thickener concentrates sludge by separating gas and liquid from the sludge 2. Introduction By spraying sludge. EV thickener removes gas and liquid; and concentrates sludge. A gas removal process maximizes thickening efficiency by eliminating compounds and gases. which have negative effect on sludge digestion Loading Secondary sludge Digestion sludge Organic materials(kg/㎡·d) 20 ~ 40 70 ~ 120 Hydraulic load(㎥/㎡/hr) 0.2 ~ 0.3 1.1 ~ 1.3 3. Characteristics 1) Installation on the existing facility - Efficient gas removal by spraying sludge - Dense sludge concentration - Reduction in additional chemical use - Reduction in temperature fluctuation - In case of anaerobic sludge digestion. high-concentration sludge stabilizes digestion procedure - Decrease in concentration of sludge in supernatant reduces loading in aeration tank 2) New installation - Dense sludge concentration and reduced concentration time. - Requires minimum digestion tank volume - Reduced sludge in the feedback supernatant increases flow rate in aeration tank 4. Applications Livestock wastewater treatment plant | Equipment |
| 1397 | Pneumatic Conveyor | CBP Series Sludge Cake Conveyer | Cheon Bo ENG. Co., Ltd. | http://www.cheonbo.co.kr/ | 1. Outline The most remarkable model among transfer facilities. Transports any CAKE with approximately 70% moisture content vertically and horizontally using air pressure (5-8 kg/cm3) through piping. resulting in more efficient performance in restricted space than other transport facilities. 2. Introduction |
Instrument & Chemicals |
| 1398 | Sludge dehydration system | Electrical infiltration type complex dehydrator | Environsoft Co., Ltd. | http://www.environsoft.com/ | 1. Outline This product produces highly dehydrated sludge cakes. which have water content of 60% or less. by applying compression. electrophoresis. and electroosmosis to the existing belt press dehydrator. This electrical dehydrator first removes free water by compression. and then. removes bound water by forming electric field on a sludge layer. 2. Introduction (See fig. 1.2) |
Equipment |
| 1399 | Sludge dewatering centrifuge | Sludge dewatering centrifuge | Muhan Technic Co., Ltd. | http://www.muhandae.co.kr | 1. Outline - It dewaters the sludge produced by the wastewater treatment process by injecting the high polymer coagulants and sludge continuously in the rotating bowl. It can control the percentage of water content of discharged solids. It discharges the regular cake by controlling the speed of inside screw automatically by dealing with the change of concentration of inflowing sludge. 2. Introduction 3. Characteristics - Small amount of environmental pollution compared to other dewatering device. - Not necessary of close attention of operator. - Available of automatic operation stably. - Available to dewater the surplus sludge of the lowest concentration or complex sludge of high concentration effectively. - Available of stable operation because of differential speed-controlling function which discharges the cake regularly by controlling the screw speed as the change of concentration of inflowing sludge. 4. Application - Tap water - Sewage - Livestock wastewater - Excreta - Dewatering the final sludge produced by other wastewater treatment plants |
Equipment |
| 1400 | Sludge Discharge Device of Settling Tank | Sludge Discharge Device of Settling Tank | DUK SUNG INDUSTRIES CO., LTD. | http://www.dswm.kr | 1. Outline • It disperses sludge transferred from a settling tank and piled in a hopper to discharge smoothly. 2. Introduction 14Biz-112.JPG) http://img.konetic.or.kr/apec-vc/xml/img/market_place/(eng)14Biz-112.JPG'>3. Character • In general. the sludge near bell mouth. among the sludge piled up in a settling tank of the purification plant and sewage treatment plant. is discharged well. While the sludge located far away is not discharged smoothly. stacked up continuously. and is hardened. For this reason. a vicious circle. which only supernatant water or sludge with low concentration is discharged through a waterway formed in consolidated sludge. is constantly caused. • It includes sludge impact that is bent by drive means. breaks through piled sludge in the hopper. and disperses the sludge above. • It improves water quality by using a discharge device to disperse and discharge sludge evenly in a hopper. 4. Application • Purification plants and sewage treatment plants |
Equipment |
반응형
'놀면서 일하기 > 창업 아이디어링 + 문서' 카테고리의 다른 글
| 환경산업 관련 제품 및 기술 목록 : 1601-~~~ (0) | 2023.12.25 |
|---|---|
| 환경산업 관련 제품 및 기술 목록 : 1401-1600 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 1001-1200 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 801-1000 (0) | 2023.12.25 |
| 환경산업 관련 제품 및 기술 목록 : 601-800 (0) | 2023.12.25 |
댓글